Académique Documents
Professionnel Documents
Culture Documents
NAMES
ADMISSION NUMBER
ARUSHA TECHNICAL
Qn1. The following
diagram was used to determine the
drainage spacing
URSULINIA
J. BERNARD
14020413029
COLLEGE
DEPARTMENT: CIVIL
ARON SAMWELI
YAMUNGU CARLOS
ENGINEERINGPROGRAMME: BACHELOR OF
14020413001
CIVIL AND IRRIGATION ENGINEERINGMODULE
NAME: DESIGN OF DRAINAGE SYSTEMMODULE
14020413006
CODE:
CIU 07317INSTRUCTORS NAME: Mr.
MAGANIA .FTITLE: ASSIGNMENT NO.
14020413004
th
ONEPREPARED BY: GROUP FOURSubmission 15
February 2016 at 10:30 hrsPARTICIPANTS:1
14020413030
Whereas;
S =Spacing of the tile drain.
a = Depth of impervious layer from the center of drain.
b = maximum height of drained water table above the impervious layer.
X = any distance from the center of drain.
y = depth of water table above the impervious layer.
Yo is depth of water table at x distance above the center of drain.
V= discharge per unity area.
q = discharge per unit length.
K =coefficient of permeability.
Show that a), Q =
Solution
From
qx = k
.i
Where k is hydraulic conductivity of the soil drained and qx is the unit discharge at any x
distance.
Also to determine the unit discharge qx at any distance late say X.
qx = q( ) ..ii
qx = qx ,
= q( )