Académique Documents
Professionnel Documents
Culture Documents
Task
1.
Checked
Network Preparation
a.
Open TCP/UDP ports 139, 445, and 902 (Converter 3.0.0) or 443 (Converter 3.0.1)
b.
2.
3.
4.
Open network ports between source and destination, alternative is to create a VM visible to source, copy VM
files to location visible to destination, and import VM
c. Use FQDN to connect to both source and VI3
Network Preparation
a. Open TCP/UDP ports 139, 445, and 902 (Converter 3.0.0) or 443 (Converter 3.0.1)
b. Open network ports between source and destination, alternative is to create a VM visible to source, copy VM
files to location visible to destination, and import VM
c. Use FQDN to connect to both source and VI3
Check basic network
a. Ping from source system to VC host
b. Ping from VC to ESX target system
c. Ping from source system to ESX target system
d. Ping from ESX target system to VC host
e. Ping from ESX target to source system
Check the port usage
a. Telnet from source system to VC host port 902
b. Telnet from source system to ESX target system port 902
c. Telnet from VC to ESX server target system port 902
d. Telnet from VC to source system ports 902, 445, 139
Note the Virtual Center or ESX server may be configured to listen on port 905. If so, check that all systems are configured
consistently and that you can telnet to the appropriate ports.
5.
6.
7.
8.
d.
e.
9.
Guest Troubleshooting
a. Blue screen after powering on
b.
c.