Académique Documents
Professionnel Documents
Culture Documents
3.5 Gauges
525
Measuring
For Service details, Calibration
please refer to the front
under the S tab from page 3
onwards!
IP degrees of protection
First digit
Level of protection provided by the enclosures against contact
and the intrusion of solid objects, dust or water
Level
Description
0
No protection
Dust tight
2
3
4
Explanation
No special protection measures to prevent contact
and penetration of solid foreign objects.
Protected against the penetration of solid foreign objects
with a diameter of 50 mm and greater.
Protected against the penetration of solid foreign objects
with a diameter of 12.5 mm and greater.
Protected against the penetration of solid foreign objects
with a diameter of 2.5 mm and greater.
Protected against the penetration of solid foreign objects
with a diameter of 1 mm and greater.
Dust is not completely prevented from penetrating;
however, does not penetrate to such an extent that the
equipments function and safety are impaired.
Complete prevention of penetration by dust, full protection against contact.
Second digit
Level of protection against water for equipment inside the
enclosure
Level
0
Description
No protection
Explanation
No special protection measures to prevent the penetration of water.
Vertically falling water drops may not have any harmful effects.
526
4
5
6
7
water
Protection against splashing
water
Protection against water jets
Protection against powerful
water jets
Protection against temporary
immersion in water
Vertically falling water drops may not have any harmful effect on the
equipment when the enclosure is tilted by up to 15 from the vertical.
Protected against water sprayed on the equipment
at any angle up to 60 from the vertical.
Water splashing against the enclosure from any direction
may not have any harmful effects.
Water jets sprayed against the enclosure from any direction
may not have any harmful effects.
Powerful water jets sprayed against the enclosure from any direction
may not have any harmful effects.
Protected against the penetration of a harmful quantity of water when the
equipment is temporarily immersed in water up to 1 m deep, from the bottom
of the equipment, under standardised time and pressure conditions.
The equipment is suitable for continuous immersion in water.
The conditions must be individually agreed between the manufacturer and user;
however must be more severe than those specified for Level 7.
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
5 years
Calibration
w arranty
30 004
30 008
30 008 001
Measuring
range
mm
0
0
0
0
0
100
150
150
200
300
30 004...
Thumb lock
001
004
-
30 008...
Lockscrew
Length of
jaws
mm
Vernier
001
002
004
005
006
30
40
40
40
40
0.05
0.05
0.02
0.05
0.05
mm
Calibration
30 012
30 014
30 012...
Lockscrew
30 014...
Thumb lock
0 - 150
0 - 200
0 - 300
002
003
005
002
003
005
Length of jaws
Vernier
mm
mm
40
50
64
0.05
0.05
0.05
Calibration
30 016
Measuring range
mm
30 016...
Length of jaws
mm
Vernier
mm
0 - 150
001
40
0.05
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Measuring
range
mm
527
5 years
Calibration
w arranty
30 020 011
with parallax-free reading
30 020 014
30 020...
Length of jaws
mm
Vernier
mm
Type
0 - 150
0 - 150
0 - 150
011*
012
014
40
40
40
0.05
0.05
0.05
Calibration
30 024 001
Measuring range
mm
30 024...
Length of jaws
mm
Vernier
mm
0 - 150
0 - 100
001
002
40
40
0.05
0.05
30 024 002
with round depth gauge
Stainless steel
Read-off parts matt chrome plated
Four way measurement and thread table
in synthetic leather bag
Calibration
Measuring range
mm
30 025...
Length of jaws
mm
Vernier
mm
0 - 150
001
40
0.05
528
5 years
made of stainless steel, hardened, measuring faces ground and finely lap polished, matt chrome plated scale, transfer elements protected against impact, adjustable dial, toothed rack protected against
dust, with lock screws, fine adjustment using drive roll
In plastic case
Calibration
w arranty
30 028
Measuring range
mm
0
0
0
0
150
150
200
300
30 028...
Length of jaws
mm
Resolution
mm
1 turn of pointer
equals length in mm
001
002
022
032
40
40
50
62
0.01
0.02
0.02
0.02
1
2
2
2
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Guide track titanium coated, particularly easy to read, quick adjustment with one hand, high degree of precision, all parts made of
stainless steel, with lock screw, in case with factory certificate of
inspection
Calibration
30 032
Measuring range
mm
30 032...
Length of jaws
mm
Resolution
mm
1 turn of pointer
equals length in mm
0 - 150
0 - 150
0 - 200
002
005
020
40
40
50
0.02
0.01
0.01
2
1
1
30 036...
160
Bag length
mm
001
250
30 036 001
3
30 038 015
Measuring range
mm
30 038...
Weight
g
Measuring accuracy
mm/inch
0 - 150
015
45
0.01/0.0005
30 039 001
Measuring range
mm
30 039...
Resolution
mm
1 turn of pointer
equals length in mm
0 - 150
001
0.1
10
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
529
Calibration
Functions:
On / Off, zero reset, origin, data output
30 041...
Technical data:
Incremental value 0.01mm, digit height 9mm
all models with data output
Supplied:
in a box, including 1 battery and factory certificate of inspection
Replacement battery Prod. No. 64 866 207
Measuring range
0
0
0
0
0
0
0
0
0
0
0
0
mm
- 150
- 150
- 150
- 150
- 150
- 150
- 200
- 200
- 200
- 200
- 200
- 300
30 041...
Drive wheel
205
210
215
220
225
230
235
240
245
250
255
260
Depth gauge
mm / inch
switchover
flat
round
round
flat
flat
flat
flat
flat
flat
flat
flat
flat
Length of jaws
mm
40
40
40
40
40
40
50
50
50
50
50
64
Calibration
30 042 001
530
30 042 005
Measuring
range mm
30 042...
Length of jaws
mm
Resolution
mm
0 - 150
0 - 200
0 - 150
001
002
005
40
50
40
0.01
0.01
0.01
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
w arranty
Calibration
30 044 001
Functions:
Supplied:
ON / ZERO
mm / inch
In plastic box, with battery
Measuring
range mm
30 044...
Length of jaws
mm
Resolution
mm/inch
0 - 150
001
40
0.01 / 0.0005
Calibration
Depth gauge
001
002
003
011
012
013
020
flat
flat
flat
flat
flat
flat
round
30 045
Data output
Measuring range
mm
IP67
0 - 150
0 - 200
0 - 150
0 - 200
0 - 150
Calibration
All-metal design
Length of jaws
mm
Resolution
mm/inch
0 - 150
001
40
0.01 / 0.0005
5 years
100
150
150
200
300
flat
flat
flat
flat
round
Calibration
w arranty
30 047 011
30 047...
Depth gauge
mm
Length of jaws
mm
Reading mm /
inch
000
001
011
020
030
flat
flat
round
flat
flat
30
40
40
50
64
0.01 / 0.0005
0.01 / 0.0005
0.01 / 0.0005
0.01 / 0.0005
0.01 / 0.0005
30 047 000
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Data output
30 046 001
30 046...
101
102
111
112
200
w arranty
Measuring
range mm
0
0
0
0
0
Depth gauge
5 years
Measuring
range mm
30 045...
5 years
531
Calibration
30 049
30 049 103
with round depth gauge
Measuring range
mm
0 - 150
0 - 200
0 - 150
0 - 150
0 - 200
30 049...
Depth gauge
Incremental value
Data output
101
102
103
111
112
flat
flat
round
flat
flat
0.01
0.01
0.01
0.01
0.01
Calibration
30 050
Accessories:
38 452 031
38 452 032
30 053
Measuring range
mm
0
0
0
0
30 050...
Length of jaws
mm
Resolution
mm
Data output
001
003
007
011
40
50
40
50
0.01
0.01
0.01
0.01
150
200
150
200
Number of groove
30 052
measuring inserts
532
001
A
mm
18.5
15.0
7.5
5.0
B
mm
0.65
1.0
0.65
0.4
0.4
C
mm
31.0
25.0
15.8
10.5
D
mm
10
6.5
4.8
1.6
1.0
30 052
30 053...
Size of the
contact area
mm
075
100
125
75 x 12
100 x 12
125 x 14
30 053
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Calibration
5 years
w arranty
001
Calliper jaws 200 mm
Measuring range
mm
0
0
0
0
0
0
30 100...
1000
1500
2000
1000
1500
2000
Fine adjustment
001
003
005
010
013
015
Vernier
mm
no
no
no
yes
yes
yes
010
0.05
0.05
0.05
0.05
0.05
0.05
Other measuring ranges and jaw lengths as well as 1/50 Vernier available on request.
30 100...
1000
1500
2000
100
150
200
Calibration
5 years
w arranty
30 104
Measuring range
mm
0
0
0
0
30 104...
200
250
300
500
001
002
003
007
30 108...
Length of Hole-measjaws
uring end
mm
shoulder mm
001
002
003
007
65
80
100
150
10
10
10
20
Vernier
mm
30 108
0.05
0.05
0.05
0.05
0
0
0
0
30 117...
Fine
adjustment
Length of
jaws
Vernier
mm
Error limit
mm
200
300
500
1000
002
003
005
010
no
no
no
no
60
90
150
150
0.05
0.05
0.05
0.05
0.05
0.08
0.10
0.15
0 - 280
0 - 500
0 - 1000
028
050
100
yes
yes
yes
90
150
150
0.02
0.02
0.02
0.04
0.06
0.08
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Measuring
range
Calibration
533
Calibration
made of aluminium
30 113
003
005
008
010
Fine adjustment
no
no
no
no
Length of jaws
mm
90
150
150
150
Error limits m
External measurement
30
30
70
80
013
015
018
020
yes
yes
yes
yes
90
150
150
150
30
30
70
80
30 113...
300
500
800
1000
5 years
w arranty
Calibration
30 121
Measuring range
mm
0 - 300
0 - 500
0 - 800
0 - 1000
30 121
30 122
003
005
008
010
003
005
008
010
Resolution
mm/inch
0.01/0.0005
0.01/0.0005
0.01/0.0005
0.01/0.0005
Length of jaws
mm
90
150
150
150
30 122
534
Accessories:
38 452 031
38 452 032
64 866 207
Measuring range
mm
0
0
0
0
0
- 200
- 300
- 500
- 750
- 1000
Calibration
30 124
30 124...
Hole-measuring
end shoulder mm
Length of jaws
mm
Error limit
mm
001
002*
003
004
005
10
10
20
20
20
60
90
150
150
150
0.03
0.04
0.06
0.06
0.07
*Preset function: two values can be saved, OFFSET function: for internal measurement
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
5 years
Resolution 1/20 mm
made of stainless steel, completely hardened
Main data scales and indicating Vernier scale matt chrome
plated
with lock screw
Calibration
w arranty
30 188
Measuring range
30 188...
mm
10-160
20-160
26-200
001
002
003
Length of jaws
mm
mm
mm
25
40
60
3.0
5.0
7.0
0.9
2.0
3.0
Calibration
w arranty
In-house standardd
Stainless steel, hardened
Reading parts matt chrome plated
Lock screw
Including case
30 192 003
30 192 005
Measuring range
mm
30 192...
Resolution
mm
Points
4 - 40
4 - 40
003
005
0.05
0.05
3
5
5 years
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
535
w arranty
Calibration
30 204 008
30 204 015
Measuring
range mm
0
0
0
0
5 years
30 204...
Base extension
length mm
Measuring
pin mm
008
015
020
030
50
100
100
150
1.0
1.5
1.0
2.0
80
150
200
300
Measuring
beam
10 x 3.5
8x3
8x3
12 x 4
Vernier
mm
0.05
0.05
0.05
0.05
5 years
Measuring range
mm
0
0
0
0
Calibration
w arranty
30 212...
Base extension
length mm
Vernier
mm
001
002
004
005
100
100
150
150
0.05
0.05
0.05
0.05
150
200
300
500
30 212
Calibration
30 216
Measuring range
mm
150
200
300
600
1000
Base extension
length mm
Vernier
mm
Error limit
mm
001
002
003
004
005
100
100
100
250
250
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.08
0.10
0.15
00000-
30 216...
536
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Calibration
5 years
w arranty
30 220
Measuring range
mm
30 220...
Base extension
length mm
Measuring beam
mm
Vernier
mm
0 - 200
0 - 300
0 - 500
002
004
006
100
125
160
8x3
12 x 4
12 x 4
0.05
0.05
0.05
Calibration
5 years
w arranty
30 221
Measuring range
mm
30 221...
Base extension
length mm
Vernier
mm
0 - 150
0 - 200
015
020
100
100
0.05
0.05
5 years
Calibration
w arranty
30 222
Measuring range
mm
30 222...
Base extension
length A mm
Resolution
mm / inch
B
mm
t
mm
0 - 150
0 - 200
0 - 300
015
020
030
100
100
100
0.01/0.0005
0.01/0.0005
0.01/0.0005
2
2
2
5
5
5
Measuring range
mm
30 224...
Base extension
length mm
Vernier
mm
Error limit
mm
0 - 150
0 - 200
0 - 300
001
002
003
100
100
100
0.05
0.05
0.05
0.05
0.05
0.08
30 224
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Calibration
537
5 years
w arranty
Calibration
30 230...
Base extension
length mm
Resolution
mm / inch
0 - 150
0 - 200
0 - 300
015
020
030
100
100
100
0.01/0.0005
0.01/0.0005
0.01/0.0005
30 230
Calibration
Replacement battery:
Signal cable, 1 m:
Signal cable, 2 m:
Depth gauge base extensions
Measuring range
mm
0
0
0
0
150
200
300
450
No.
No.
No.
No.
64
38
38
30
866 207
452 031
452 032
053...
30 232
30 232...
Base extension
length mm
Error limit
mm
Resolution
mm
015
020
030
045
100
100
100
250
0.03
0.03
0.04
0.05
0.01
0.01
0.01
0.01
No.
No.
No.
No.
64
38
38
30
Calibration
866 207
452 041
452 042
053...
30 233
538
Measuring range
mm
30 233...
Incremental value
mm
Error limit
mm
0 - 150
0 - 200
015
020
0.01
0.01
0.03
0.03
30 053...
Size of the
contact area
mm
075
100
125
75 x 12
100 x 12
125 x 14
30 053
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Set
30 260...
3-piece
003
5 years
w arranty
Calibration
30 260 003
Set
30 260...
7-piece
007
30 260 007
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
539
On-site calibration
Calibration in your company or in the mobile laboratory
Measuring equipment repairs for an additional charge
DKD-K-04206
DKD-K-33201
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
5 years
31 002...
0 - 25
25 - 50
50 - 75
75 - 100
100 - 125
125 - 150
025
050
075
100
125
150
31 002
Measuring range
mm
150
175
200
225
250
275
31 003...
300 - 400
400 - 500
500 - 600
600 - 700
700 - 800
800 - 900
900 - 1000
040
050
060
070
080
090
100
31 002...
175
200
225
250
275
300
175
200
225
250
275
300
5 years
Measuring range
mm
Calibration
w arranty
Calibration
w arranty
31 003
5 years
w arranty
Measuring
range
mm
31 006...
0 - 75
0 - 100
0 - 150
075
100
150
Resolution
Qty
1/100
1/100
1/100
3
4
6
31 006 150
25
50
75
100
31 014...
.
025
050
075
100
Calibration
31 014
Resolution
mm
0.01
0.01
0.01
0.01
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Micrometers
541
31 018...
0-100
100
Contents
Qty
4
31 018 100
Measuring range
mm
Measuring range
mm
0
25
50
75
100
125
25
50
75
100
125
150
31 024...
Resolution
mm
.
025
050
075
100
125
150
Calibration
31 024
Measuring range
mm
150
175
200
225
250
275
0.01
0.01
0.01
0.01
0.01
0.01
175
200
225
250
275
300
31 024...
.
175
200
225
250
275
300
Resolution
mm
0.01
0.01
0.01
0.01
0.01
0.01
Measuring range
mm
31 025...
0 - 75
0 - 150
150 - 300
075
150
301
Contents
Qty
3
6
6
31 025 150
Micrometers
542
Measuring range
mm
31 026...
0 - 25
25 - 50
025
050
Calibration
31 026
Error limit
m
Scale interval
mm
3
3
0.001
0.001
One-hand operation
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
5 years
31 033...
0 - 25
25 - 50
025
050
w arranty
Calibration
31 033 025
Resolution
mm
0.01
0.01
31 040...
Resolution
.
0
0
100
200
300
400
500
600
50
150
200
300
400
500
600
700
050
150
200
301
400
500
600
700
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
31 044...
0 - 25
25 - 50
025
050
Calibration
3
Anvils
Qty
Setting
standards
Qty
1
6
4
4
4
4
4
4
5
4
4
4
4
4
4
31 040
5 years
Calibration
w arranty
31 044
Resolution
mm
0.01
0.01
25
50
75
100
31 048...
.
025
050
075
100
Calibration
31 048
Resolution
mm
0.01
0.01
0.01
0.01
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Micrometers
543
Degree of protection IP 65
with and without data output
External micrometer with impact resistant design
incl. factory calibration certificate up to 50 mm measuring
range
Incremental values: 0.001 mm
Accessories:
38 452 051
38 452 052
64 866 207
Measuring range
mm
0 - 25
25 - 50
50 - 75
75 - 100
0 - 25
25 - 50
50 - 75
75 - 100
0 - 25
25 - 50
50 - 75
75 - 100
0 - 25
Sets
0 - 50
0 - 75
0 - 100
Calibration
31 061
.
025
050
075
100
125
150
175
200
225
250
275
300
325
Error limits
m
2
2
3
3
2
2
3
3
2
2
3
3
2
650
675
700
Ratchet
Ratchet
thimble
Friction
thimble
Digimatic data
output
31 061 675
5 years
Calibration
w arranty
31 063 025
31 063...
0 - 25
25 - 50
025
050
Resolution
mm
0.001
0.001
Micrometers
544
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Calibration
31 067
31 067...
Error limit
mm
0
0
25
50
75
30
30
55
80
105
Data output
001
002
005
008
010
2.0
2.0
3.0
3.0
3.0
Calibration
31 077
Measuring range
mm
31 077...
0 - 25
25 - 50
50 - 75
025
050
075
l/d
mm
Weight
g
10/3
10/3
10/3
330
470
625
Measuring range
mm
31 083...
0 - 30
030
Calibration
31 083
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Micrometers
545
25
50
75
100
31 086...
Calibration
31 086
Error limit
mm
.
025
050
075
100
4
4
6
6
Calibration
31 090
31 090...
25
50
75
100
025
050
075
100
Measuring range
mm
31 092...
0 - 25
0 - 25*
25 - 50
25 - 50*
*with analog display
025
030
050
055
Calibration
Data output
Micrometers
metric pitch
mm
546
0.4
0.6
1
2
3.5
5.5
0.5
0.9
1.75
3
5
7
Calibration
31 096...
.
001
002
003
004
005
006
31 096
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
for measuring three and five-fluted tools, e.g. drill bits, taps,
milling cutters, reamers
with V-anvil
Resolution 0.01 mm
Scaled thimble and scaled sleeve matt chrome plated, 18 mm
Micrometer spindle 6.35 mm with clamp
Measuring faces: 60 V-anvil angle for 3-flute workpieces
108 V-anvil angle for 5-flute workpieces
enamelled frame, with ratchet spindle lock, setting standard,
adjusting spanner, in case
Measuring range
mm
31 098...
1 - 15
10 - 25
5 - 25
015
025
125
Calibration
31 098
For
.
3-flute workpieces
3-flute workpieces
5-flute workpieces
50
050
0.6
Calibration
31 099 025
3
Micrometer error limit: 3 m
Display error limit: 1m
Flatness: 0.3 m
Measuring force: 5 - 10 N
670
Calibration
Technical data:
dial indicator scale graduation: 0.001 mm
Error limits scale graduation: 0.001
dial indicator error limits: 1 m
micrometer error limits: 2 m
dial indicator display range: +/- 0.06 mm
scales: scaled thimble and scaled sleeve matt chrome plated
Measuring faces: sintered carbide tipped, ground, very finely lap polished
Flatness: 0.3 m
Measuring force: 5 - 10 N
Including box, setting standard (from 25 mm), adjusting spanner
Measuring
range mm
0
25
50
75
31 100...
- 25
- 50
- 75
- 100
025
050
075
100
Parallelism
m
L
mm
D
mm
0.6
0.6
1.0
1.0
31.5
38.0
50.0
63.0
25
56
81
106
31 100 025
Calibration
31 101
31 101...
25
50
75
100
125
150
175
025
050
075
100
125
150
175
Measuring range
mm
31 101...
225
275
325
425
225
275
300
400
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Micrometers
Measuring range
mm
547
stable
small and space-saving
secure clamping of the measuring equipment
can be locked at any inclination
max. jaw opening 15 mm
31 105...
100
001
.
31 105
31 106...
100 mm
001
31 106
Resolution 0.01 mm
Scaled thimble and scaled sleeve matt chrome plated, 18 mm
Micrometer spindle diameter 4 mm
Spindle pitch 0.5 mm, with clamping device
Measuring faces ground and finely lap polished
Base made of hardened tool steel
with ratchet
in case
from 31 120 050 with interchangeable measuring rods
(in 25 mm steps)
Measuring
range mm
0
0
0
0
0
25
50
100
150
300
31 120...
Qty of setting
rods
.
025
050
100
150
300
1
2
4
6
12
Calibration
Base size
mm
100
100
100
100
100
x
x
x
x
x
16
16
16
16
16
31 120 025
Micrometers
548
Accessories:
38 452 051
38 452 052
64 866 207
Calibration
Measuring range
mm
31 121...
0 - 150
150
Qty of rods
.
6
Base size
mm
100 x 16
Micrometer error
limits m
31 121
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Measuring
range mm
31 124...
0 - 200
0 - 200
200
201
Measuring
span mm
10
10
Calibration
31 124 200
Base size
mm
Weight
g
60 x 16
100 x 16
300
350
31 124 201
Measuring
range mm
31 126...
0 - 200
0 - 200
200
201
Measuring
span mm
10
10
Base size
mm
Calibration
3
Incremental value
mm
60 x 16
100 x 16
0.001
0.001
31 126
Calibration
31 148
Measuring
range mm
0 - 50
31 148...
.
001
Incremental value
mm
Error limits
mm
0.001
0.003
30
50
75
100
31 200...
.
030
050
075
100
Resolution
mm
Setting ring
1/100
1/100
1/100
1/100
Calibration
31 200
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Micrometers
549
Measuring range
31 201...
Number of
micrometers
075
100
.
5 - 75
5 - 100
075
100
3
4
In-house standard
with sintered carbide tips
resolution 0.01 mm
scaled thimble and scaled sleeve matt chrome plated, 18 mm
spindle pitch 0.5 mm, with clamping device
sintered carbide tipped measuring faces, ground, very finely lap polished, with ratchet
including case
Measuring range
mm
5
25
50
75
30
50
75
100
Calibration
31 208 030
31 208...
.
030
050
075
100
Calibration
31 212
Measuring range
mm
31 212...
5 - 30
030
Micrometers
550
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
fixed type
lightweight construction due to tubular design
resolution 0.01 mm
scaled thimble and scaled sleeve matt chrome plated
micrometer spindle pitch 0.5 mm, with clamping device
sintered carbide tipped measuring faces, ground, ball lap polished
from 100 mm with hand guard
including box, adjusting spanner and lock screw
Measuring range
mm
50
75
100
125
150
31 224...
31 224
Measuring range
mm
75
100
125
150
175
Calibration
075
100
125
150
175
175
200
225
250
275
200
225
250
275
300
31 224...
.
200
225
250
275
300
3
31 228
Measuring range
mm
50
50
50
50
50
31 228...
Extensions
Qty
150
300
500
1000
1500
015
030
050
100
150
3
5
6
8
10
31 239...
mm
analog
6- 8
8 - 10
10 - 12
12 - 16
16 - 20
20 - 25
25 - 30
30 - 40
40 - 50
50 - 63
63 - 75
75 - 88
87 - 100
008
010
012
016
020
025
030
040
050
060
070
080
100
Setting ring
31 239 012
Error limit
mm
Measurement depth
without / with extension
mm
6
8
10
16
16
25
25
40
40
62
62
87
87
60 / 160
60 / 160
60 / 160
70 / 220
70 / 220
90 / 240
90 / 240
100 / 250
100 / 250
100 / 250
100 / 250
100 / 250
100 / 250
4
4
4
4
4
4
4
4
5
5
5
5
5
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Micrometers
Measuring range
Calibration
551
5 years
w arranty
31 240 140
Measuring range
mm
12
20
40
100
.
112
120
140
150
Micrometers
Qty
Untoleranced
dimension mm
Measurement depth
with extension mm
3
2
4
6
1.5
1.0
1.0
1.0
115
160
160
160
155
223
233
233
Micrometers
6
12
20
50
31 240...
552
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Measuring faces titanium coated or made of sintered carbide. Tapered cone and contact point made of sintered carbide. Measurement
almost to the bottom of the hole possible (see dimension a). Easy to handle and increased measuring accuracy compared to two point
inner micrometers due to its three measuring bolts attached with an angle of 120. Automatic centring of the device in the hole.
Accuracy according to DIN 863/4, the accuracies given are subject to full contact measuring faces.
Calibration
Measuring
range
mm
31 260...
6- 8
8 - 10
10 - 12
12 - 16
16 - 20
20 - 25
25 - 30
30 - 40
40 - 50
50 - 63
62 - 75
75 - 87
87 - 100
100 - 125
125 - 150
150 - 175
175 - 200
200 - 225
225 - 250
008
010
012
016
020
025
030
040
050
060
070
080
100
125
150
175
200
225
250
analog
31 260
Measurement depth
without / with extension
mm
59
59
59
80
80
90
90
98
98
105
105
105
105
158
158
158
158
158
158
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
31 262...
digital
008
010
012
016
020
025
030
040
050
060
070
080
100
125
150
175
200
-
159
159
159
230
230
240
240
248
248
255
255
255
255
308
308
308
308
308
308
31 262 008
31 262 040
Measurement depth
without / with extension
mm
45
45
45
76
76
88
88
102
102
105
105
105
105
151
151
151
151
151
151
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
145
145
145
226
226
238
238
252
252
255
255
255
255
301
301
301
301
301
301
31 262 125
Dimension a
mm
2.0
2.0
2.0
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
13.0
13.0
13.0
13.0
13.0
13.0
31 272 Extensions
for three point type inside micrometers
6
12
20
50
- 12
- 20
- 50
- 300
31 272...
.
012
020
050
300
Length
mm
Weight
g
100
150
150
150
13
100
238
264
31 272
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Micrometers
Measuring
range mm
553
31 260
Measuring range
mm
6
12
20
50
25
50
31 260...
analog
12
20
50
100
50
75
512
520
550
600
-
31 262...
digital
650
700
31 262
Contents
Qty
Setting rings
Qty
3
2
4
4
3
2
2
1
2
2
2
1
Calibration
Micrometers
Accessories:
38 452 051
38 452 052
64 866 207
554
31 268 106
Measuring range
mm
31 268...
6- 8
8 - 10
10 - 12
12 - 16
16 - 20
20 - 25
25 - 30
30 - 40
40 - 50
50 - 63 / 62 - 75*
75 - 88 / 87 - 100*
006
008
010
012
016
020
025
030
040
050
075
480
485
485
475
480
540
555
565
610
780
850
106
112
125
150
600
800
1300
3500
Weight
(g)
31 268 006
Sets
6 - 12
12 - 25
25 - 50
50 - 100*
* with interchangeable anvils
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Measuring range
mm
32 004...
6 - 10
10 - 18
18 - 35
35 - 50
50 - 160
160 - 250
250 - 450
003
004
005
006
007
008
009
Resolution
mm
0.01
0.01
0.01
0.01
0.01
0.01
0.01
32 004
3
Type as above in wooden box
32 004 160
32 004...
18 - 160
160
Resolution
mm
0.01
Calibration
32 008
Measuring range
mm
10
18
35
50
18
35
60
150
32 008...
.
002
003
004
005
Anvils
Qty
9
9
6
11
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Measuring range
mm
555
32 012 001
3
Measuring range
mm
32 012...
18 - 150
18 - 150
001
010
Dial indicator
.
analog
digital
32 012 010
5 years
Calibration
w arranty
556
32 020 010
Measuring range
32 020...
5
10
10
30
50
1
Type
mm
0
0
0
0
0
0
32 020 012
005
010
012
030
050
100
normal
normal
shockproof
normal
normal
normal
32 020 030
Pitch
External
mm
mm
0.01
0.01
0.01
0.01
0.01
0.001
40
58
58
58
80
58
32 020 100
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
All dial gauges and indicators are subjected to an accuracy check using test equipment which can be traced back to national or international standards. Final inspection and testing of the complete series with respect to its mechanical function. The spindles are fitted
into the stem. Allowable lateral play standardised. The scales can be rotated with the bezel so that the indicator can be easily reset to
zero. The needles are put back by at least 0.1 mm at rest so that the cogwheels of the dial indicators are under normal engagement
conditions when reset. The limit tabs can be used to set the respective given tolerances. Exchangeable standard feeler with steel ball,
diameter 3.175 mm and thread M 2.5. The diameter of the stem is 8 mm h 6.
Calibration
...001
Measuring span
mm
32 025...
External
mm
Special feature
10
10
10
10
001
002
003
012
58
58
58
58
004
005
006
58
61
58
concentric display
Impact protection
Concentric display and
impact protection
Optimum impact protection
Water and oil tight
Magnetic back
10
10
10
...003
...005
Calibration
32 026 004
Measuring span
32 026...
mm
0.4
0.8
0.8
1.0
001
002
003
004
Overrun
External
mm
mm
4.5
4.0
9.0
9.0
40
40
58
58
32 026 003
No. 32 026 001 / 32 026 002 are also available on request with a watertight design. On request,
No. 32 026 003 is also available with a watertight and oil tight design.
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
...002
557
Measuring span
mm
32 027...
20
30
30
50
80
001
003
005
007
009
Calibration
External
mm
Type
58
58
58
58
58
Impact protection
-
32 027
Calibration
32 028
Measuring span
mm
32 028...
External
mm
Type
3
3
5
5
001
003
005
007
32
40
40
40
009
44.5
011
40
Smallest model
Impact protection
Optimum impact
protection
Oil & watertight
and shockproof
Magnetic back
558
Measuring span
mm
32 029...
1
1
1
Calibration
External
mm
Type
001
003
58
58
005
58
Precision mechanism,
impact protection
Optimum impact
protection
32 029
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Form/ Dimensions
32 030...
Feeler
made of
spherical
101
Steel
spherical
103
sintered carbide
spherical
105
Ruby
spherical
106
Ceramic
Flat, 4.8 mm
107
Steel
Flat, 4.8 mm
109
sintered carbide
...101 - ...105
...107 + ...109
Flat, 10 mm
110
Steel
Flat, 10 mm
113
sintered carbide
Convex
115
Steel
with roller
028
Steel
030
sintered carbide
...110 + ...113
...115
...028
conical
118
Steel
with offset
needle
034
sintered carbide
...030
...118
Pin
120
Steel
Pin, 40 mm
121
Steel
Pin
122
sintered carbide
Ball 1 mm
124
Steel
...034
...120 + ...122
Ball 3 mm
126
Steel
Ball 3 mm
128
sintered carbide
Ball 5 mm
130
Steel
Ball 5 mm
132
sintered carbide
134
136
138
140
142
144
146
148
...124 -...132
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
559
...001
Calibration
...002
...004
...005
...006
560
Measuring range
...007
Scale value
32 036...
mm
5
001
1
002
003
10
004
10
20
005
30
006
50
007
80
008
Special feeler tips available on request
External
mm
mm
0.01
0.001
0.01
0.01
0.01
0.01
0.01
0.01
41
55.6
55.6
55.6
78
78
78
78
...008
Type
shockproof
Jewelled
Watertight
shockproof
shockproof
-
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Autogenous engineering
Filler metals
Arch welding
Welding equipment
Welding accessories:
Extractor
technology
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
5 years
Calibration
32 042
Measuring span
Incremental value
32 042...
mm
0 - 12.5
0 - 25.0
0 - 50.0
w arranty
001
003
005
Error limits
mm / inch
mm
0.01/0.0005
0.01/0.0005
0.01/0.0005
0.03
0.03
0.03
Calibration
32 044
Measuring span
mm
32 044...
12.7
12.7
001
003
Incremental value
mm
Error limits
mm
0.01
0.001
0.02
0.003
562
Calibration
Measuring span
mm
32 046...
25
001
Incremental value
mm
Error limits
mm
0.01
0.02
32 046
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Calibration
Functions:
ON / OFF
ZERO / ABS switchover
Switchover of the counting direction
PRESET (preselection)
Tolerance input
with data output
Feeler with sintered carbide ball
Thread M 2.5 x 0.45 mm
Prod. No. 32 047 020 with low measuring force
(0.4 - 0.7 N)
Accessories:
38 452 011
38 452 012
64 866 207
003. 013
with go/no go
tolerance display
Measuring span
mm
32 047...
12
25
50
12
25
50
12
001
003
005
011
013
015
020
Incremental value
mm
0.001
0.001
0.001
0.01
0.01
0.01
0.001
Error limits
mm
0.003
0.003
0.006
0.02
0.03
0.04
0.003
Measuring force
N
1.2
1.8
2.3
0.9
1.8
2.3
0.4 - 0.7
005. 015
Functions:
ABS/INC
PRESET
Zero setting
Tolerance evaluation
DATA HOLD
Min/Max function
DIGIMATIC data output
Degree of protection IP 42
Display can be rotated through 330
Incremental value can be selected in 12 steps:
0.0002 (1); 0.0005 (2); 0.001 (3); 0.002 (4); 0.005 (5); 0.01
(6); 0.02 (7); 0.05 (8); 0.1 (9); 0.2 (10); 0.5 (11); 1 (12) mm,
Accessories:
38 452 011
38 452 012
64 866 207
32 060 001
with integrated
calculation function
Measuring
span mm
32 060...
12.7
001
Error limit
mm
Measuring
force N
0.003
1.5
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Calibration
563
Calibration
Functions: ON / OFF; MODE: Hold Max. and Min. value, Max - Min
mode (TIR), analog measuring range switchover, zero setting INC /
ABS, PRESET (preselection), tolerance input, switchover of the counting direction, button lock function, data output
Accessories:
38 452 011
38 452 012
Measuring span
mm
32 064...
25
50
001
003
Error limits
mm
Measuring
force N max.
0.001/0.01
0.001/0.01
0.003
0.006
1.8
2.3
32 064
Calibration
564
Accessories:
38 452 011
38 452 012
Measuring span
mm
32 066...
30
60
003
006
003
Error limits
m
0.001 / 0.0005
0.001 / 0.0005
2.0
3.0
006
Calibration
...003
Measuring span
mm
32 067...
5.0
5.0
12.7
12.7
003
006
030
036
Error limits
mm
0.01
0.001 / 0.01
0.01
0.001 / 0.01
0.02
0.003/0.01
0.02
0.003/0.01
...030
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
32 068...
0.1
0.1
0.5
001
002
008
Scale
Numbering
graduations mm
0.001
0.001
0.01
Overrun
Calibration
32 068 001
Characteristic
External
mm
50-0-50
50-0-50
25-0-25
32 068 008
mm
3
3
2.5
Impact protection
Waterproof
Impact protection
32 068 002
62
62
62
5 years
Calibration
w arranty
001
Measuring span
32 082...
mm
0.8
0.2
Scale
graduations
mm
External
Stem
H8, H4
mm
0.01
0.002
30
30
2
2
008
002
3
005
Calibration
Adjustable feeler
001
Measuring span
32 084...
mm
0.8
0.8
0.8
Scale graduations
010
011
Numbering
Bezel
mm
001
010
011
0.01
0.01
0.01
40-0-40
0-40-0
0-40-0
Feeler length
mm
mm
28
40
40
12.3
12.0
12.0
Calibration
32 088 108
Measuring span
Special features
32 088...
non-magnetic
Revolutions (rpm) counter
DIN standard, non-magnetic
non-magnetic
Long feeler tip
Revolutions (rpm) counter
102
103
104
108
110
116
mm
0.2
0.6
0.8
0.8
1.0
1.6
32 088 116
with revolutions counter
Scale
graduations
mm
0.002
0.002
0.01
0.01
0.01
0.01
32 088 110
with long tip
Numbering
0-100-0
0-100-0
0- 40-0
0- 40-0
0- 50-0
0- 40-0
32 088 104
DIN standard, non-magnetic
f tot.
mm
4
11
13
13
13
13
14.7
14.7
21.0
21.0
44.5
21.0
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
565
32 088...
.
200
32 088 200
Calibration
Measuring span
32 090...
mm
Scale
graduations
mm
0.8
0.2
0.5
001
002
003
0.01
0.002
0.01
Scale numbers
Feeler length
mm
0 - 40 - 0
0 - 100 - 0
0 - 25 - 0
12
12
35
32 090
566
Feeler ball
mm
32 092...
2
2
2
2
001
002
101
102*
Length
mm
12.8
35.7
12.8
35.7
32 100...
001
.
32 100 001
Shank
mm
32 098...
6 x 12
001
Clamped length
mm
32 098 001
50
32 102 Stems
for dial test indicators with dovetail guide
Shank
mm
32 102...
8
4
001
002
32 102 001
32 102 002
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
for dial indicators and gauges, with vertical and horizontal adjustment, supporting arm can be swivelled on all sides so that the dial
indicator can be placed in any position required. Mounting hole
8 mm, fit H 7, 2 sintered magnets are built into the contact face to
ensure flat, planar and good adhering support surface results.
Supplied without dial indicator
Magnetic base
LxBxH
mm
Product number
73 x 38 x 11
72 x 26 x 37
32 116 001
32 122 001
32 116 001
additional adhesion
surfaces on both sides
Height with
bracket
mm
46
59
32 122 001
5 years
w arranty
32 138
32 138...
mm
280
002
Magnetic base
LxBxH
mm
Adhesive force
60 x 50 x 55
750
kp
5 years
w arranty
...003
...101
Total height
32 139...
mm
170
170
001
003
Replacement
magnetic base
32 139...
101
103
Magnetic base
LxBxH
mm
Adhesive force
34 x 30 x 35
30 x 25
170
170
Thread
kp
M6
M6
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Total height
567
5 years
w arranty
...139
Total height
32 140...
mm
390
730
Replacement
magnetic base
32 140...
039
073
139
-
Adhesive force
Magnetic base
LxBxH
mm
60 x 50 x 55
120 x 60 x 55
750
1200
Thread
32 140
kp
M8
M 10
Total height
mm
32 135...
150
015
Magnetic base
x H mm
35 x 30
32 135
568
Total height
32 143...
mm
310
480
255
480
Reach
mm
002
004
022
024
260
400
260
400
Magnetic base
LxBxH
mm
Weight
60 x 50 x 55
75 x 50 x 55
1.5
2.2
0.5
0.9
kg
32 143
005
Measuring height
mm
30
85
145
300
290
008
32 145
.
005
008
009
016
032
Calibration
Measuring area
mm
= 60
= 60
70 x 70
220 x 160
200 x 200
009
Cantilever
mm
45
60
85
90
150
Column
mm
23
22
31
30
016
Total height
mm
110
185
270
435
435
032
Weight
kg
2.50
3.50
3.75
8.75
22.75
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Benzing
Calibration
32 144 001
32 144...
100
100
150
001
004
020
Measuring
area mm
Cantilever
mm
Total height
mm
50
60 x 68
98 x 115
49
100
135
200
200
295
32 146...
100
001
Benzing
Measuring
height mm
32 144 020
Measuring
area mm
50
Calibration
Cantilever
mm
Total height
mm
49
200
32 146 001
Benzing
Calibration
32 148 060
Measuring
height mm
32 148...
160
060
160
080
Further sizes available on request
32 148 080
Measuring
area mm
Cantilever
mm
Weight
kg
98 x 180
170 x 215
180
180
13
23
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Measuring
height mm
32 144 004
569
Benzing
32 150
Measuring
height mm
32 150...
180
020
Measuring
area mm
Cantilever
mm
Base size
mm
Weight
kg
200 x 150
200
260 x 150
9.5
570
Made from special, dense cast iron with steel additive, and very high
wear resistance, consisting of
Measuring bench
1 pair tailstocks and measuring stand
Measuring surfaces according to DIN 876/1
Measuring bench with 2 T-slots for holding the tailstocks and the
measuring stand
Measuring stand made of stable rod with side arm, fine adjustment
and mounting hole for dial indicator
Right-hand tailstock with sliding spindle sleeve - left-hand tailstock with fixed tip
No. 32 208 001 without prisms (V-blocks)
32 208
Pitch (height
of centres)
mm
32 208...
50
75
100
200
350
450
001
003
005
Size of the
measuring
bench L x B mm
Weight
350 x 110
500 x 110
700 x 180
8
12
35
kg
Other designs and special accessories as well as concentricity devices with larger centre
distance available on request.
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Dial indicator
32 280
mm
0.01
0.01
0.002
0.01
0.002
CO-S
CO
CO
CIII
CIII
Inner test
mm
6 - 125
6 - 125
6 - 125
2 - 400
2 - 400
.
100
110
112
120
122
32 282
Clamping shafts
Shank type
Size
32 283
MK2 x M10
MK3 x M12
MK4 x M16
SK40 x M16
SK40 x M16
SK 50 x M 24
16 mm
20 mm
010
012
016
116
216
224
316
320
.
Probe insert, sphere 5 mm
Probe insert, curved sphere 5 mm
Probe insert, sphere 1.7 mm
Setting sphere 25 mm
Edge finder
Equipment box
made of wood with storage space
005
015
020
025
030
050
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
571
Measuring range
mm
32 304...
10
002
Calibration
Resolution
mm
Cantilever
mm
0.01
45
32 304 002
Calibration
32 308 001
32 308 004
Measuring
range mm
0
0
0
0
10
20
10
20
32 308...
.
001
003
004
005
Resolution
mm
Cantilever
mm
0.01
0.01
0.01
0.01
15
30
120
120
Type
Error limit
mm
particularly small
with flat ceramic plate-like measuring faces
with flat ceramic plate-like measuring faces
with flat ceramic plate-like measuring faces
0.02
0.025
0.02
0.025
572
Calibration
012
Measuring range
mm
32 313...
0 - 12
0 - 25
012
025
Weight
g
70
120
025
Measuring range
mm
32 316...
0 - 30
001
Calibration
Resolution
mm
Cantilever
mm
0.1
200
32 316
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Calibration
32 345
Measuring range
mm
32 345...
5 - 15
20 - 40
30 - 50
001
003
004
Measurement depth
mm
Resolution
mm
Error limit
mm
23
80
80
0.01
0.01
0.01
0.020
0.030
0.030
32 346...
32 346 030
012
025
030
040
USB interface
Measurement depth
mm
12.5
25.0
30.0
40.0
Calibration
Incremental value
mm
10
29
49
53
0.005
0.01
0.01
0.01
Error limit
mm
0.01
0.02
0.02
0.02
Measuring force
N
0.7
0.9
0.9
0.9
1.2
1.4
1.4
1.4
32 348...
0 - 50
003
Measurement
depth mm
Resolution
mm
Error limit
mm
170
0.05
0.050
32 348
Calibration
020
Mitutoyo
interface
040
USB interface
Measuring range
mm
32 349...
0 - 20
0 - 40
020
040
Measurement depth
mm
Incremental value
mm
Error limit
mm
Measuring force
N
50
115
0.01
0.02
0.02
0.04
0.7 - 1.3
1.0 - 1.5
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Measuring
range mm
Calibration
573
32 402
Length
Quality 1
32 402...
Quality 3
32 402...
mm
100
150
200
101
102
103
.
201
202
203
Width
Height
mm
mm
For
shaft
mm
40
50
70
30
40
50
6 - 50
8 - 60
8 - 70
Length
32 404...
mm
75
102
102
Width
001
002
003
swivelling
mm
Height
closed
mm
25
30
46
32 / 23
48 / 29
48 / 29
0 - 60
0 - 60
0 - 60
32 404
Grad
Precision design
574
Length
32 408...
mm
50
75
100
.
001
002
003
Width
Height
mm
mm
For
shaft
mm
40
50
75
50
50
75
5 - 30
5 - 50
7 - 70
32 408
Width
32 412...
mm
120
150
200
101
102
103
Height
Length
mm
mm
For
shaft
mm
100
130
170
60
75
90
8 - 90
8 - 110
8 - 150
32 412
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Size
mm
400
500
800
1000
1200
x
x
x
x
x
400
400
600
630
800
32 502...
0
x
x
x
x
x
50
90
120
100
120
32 502...
I
012
015
018
020
022
Weight
kg
112
115
118
120
122
32 502
55
55
175
170
450
Side length
mm
32 510...
400 x 250
500 x 300
004
005
Width
mm
Perpendicularity
mm
50
60
0.003
0.004
32 510
Slab size
mm
32 514...
400 x 400
500 x 400
800 x 600
1000 x 630
1200 x 800
100
101
103
105
108
.
32 514
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
575
32 530
Length
mm
Width
mm
Quality 1
32 530...
300
400
500
600
800
1000
300
400
400
500
500
750
031
041
050
060
082
102
Quality 3
32 530...
Weight
approx. kg
431
441
450
460
482
502
20
27
43
58
104
215
32 532 Baseframes
for marking out tabletops and bench plates, with stable welded construction made of angle sections; the baseframes can be equipped
with setscrews for an additional charge. The overall dimensions are
designed for a working height of approx. 900 mm. We recommend
fitting adjustable spindles to the bases for rubbed measuring slabs,
as these enable precise alignment in the horizontal plane.
(see from No. 140)
32 532...
576
32 532...
kg
Set of adjustable
spindles
23
24
26
30
37
140
150
160
185
190
mm
400 x 400
500 x 400
600 x 500
800 x 500
1000 x 750
Weight approx.
040
050
060
085
107
/ set
32 532
32 534 001
LxBxH
mm
32 534...
360 x 260 x 65
001
Weight approx.
kg
22
Colour
32 540...
Container
Contents
mm
Tube
Tube
80
80
.
blue
red
001
002
32 540
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
for marking the machining points on metal surfaces, also suitable for
use as line marking paint, does not reflect, good adhesion, easy to
remove
Colour
32 542...
Container
Contents
ml
Spray can
Spray can
Rigid bottle
Rigid bottle
300
300
500
500
.
blue
red
blue
red
001
002
003
004
32 542 001
32 542 003
Container
32 544...
Contents
ml
.
Spray can
001
32 544 001
300
Plate size
mm
32 548...
300 x 300
400 x 400
500 x 500
500 x 500
600 x 600
600 x 600
800 x 800
800 x 800
1000 x 1000
1000 x 1000
1200 x 800
1500 x 1000
other sizes and designs
.
030
040
050
051
060
061
080
081
100
101
120
150
available on request
Plate thickness
mm
Rib height
mm
Weight approx.
kg
20
30
40
50
40
60
40
60
40
60
60
60
40
50
40
50
40
60
40
60
60
60
60
60
16
42
84
102
120
176
216
315
340
450
470
735
32 568 Baseframes
for levelling plates No. 32 548..., the frame is made of strong angle
sections with flat bar struts, the overall dimensions are designed for
a working height of 80 mm.
Plate size
mm
32 568...
400 x 400
500 x 500
600 x 600
800 x 800
1000 x 1000
1200 x 800
1500 x 1000
040
050
060
080
100
120
150
Weight approx.
kg
32 568
16
27
29
46
54
54
72
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
32 548
577
5 years
33 108...
Resolution
mm
0 - 300
0 - 500
030
050
0.02
0.02
33 108
5 years
Calibration
w arranty
Calibration
w arranty
Measuring range
mm/inch
33 110...
Resolution
mm/inch
0 - 300 / 12
0 - 600 / 24
002
005
0.02 / 0.001
0.02 / 0.001
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
33 110
578
5 years
Calibration
w arranty
33 132...
Resolution
mm
Column
mm
0 - 300
0 - 600
030
060
0.01
0.01
15
20
33 132
33 140 060
33 140 030
Measuring range
mm
33 140...
Resolution
mm
Column
mm
0 - 300
0 - 600
030
060
0.01
0.01
15
20
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
With data output, with the Mitutoyo Absolute scale. With this
scale, once the zero point has been set it is retained even if the device is
switched off and on again, while other zero points can also be fixed for
comparative measurements.
Reliable, stable, practical: Effortless and purposeful handling with
ergonomically shaped handle and gently moving, precisely controlled
feed wheel.
Large high-contrast six-digit LCD display for convenient reading of the
measurement results.
Multifunctional due to useful accessories, for example for installing a
dial indicator
Accessories:
Replacement scriber, sintered carbide tipped Prod. No. 33 111
DIGIMATIC mini processor
Prod. No. 38 410
Replacement battery
Prod. No. 64 866
Signal cable, 1 m
Prod. No. 38 452
Signal cable, 2 m
Prod. No. 38 452
Measuring range
33 150...
080
020
207
011
012
Calibration
Incremental value
Error limits
Weight
mm
mm
kg
0.01
0.01
0.04
0.06
4.6
6.4
33 150
mm
00-
300
600
003
006
Calibration
Accessories:
Replacement scriber, sintered carbide tipped Prod. No. 33 111 080
Scriber holder
Prod. No. 33 142 103
Replacement battery
Prod. No. 64 866 207
Accessories:
Replacement
Signal cable,
Signal cable,
Replacement
143
452
452
866
101
011
012
207
Measuring range
33 142...
33 143...
Column
mm
without
data output
with
data output
mm
0 - 300
0 - 600
0 - 1000
030
060
100
030
060
100
15
20
20
33 143
33 144...
003
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
33 142
579
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
580
33 160
Measuring range
33 160...
Perpendicularity
Weight
kg
8
13
22
27
mm
0 - 350
0 - 600
035
060
Standard accessories
No. 12 AAA 715Calibration block
No. 05 HZA 148
Ball stylus 5 mm
with holder
No. 011037
4 x LR6 batteries
Handle
Technical data:
Guiding
method
Incremental value
mm
mm
mm
0-350
0-600
Roller
bearing
0.001/
0.005
QM Height Measuring
range
33 160...
Digital
display
Repeat
accuracy
Allowable linear
deviations
1.8
(2 sigma)
2.8 + 0.5
L / 100
Measuring
force
Measuring
system
Battery
Battery life
LR 6 x 4 /
mains
adapter
(optional)
hrs
Traversing
method
33 144
035
060
LCD
N
Glass scale
1.6 0.5
manual
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Excellent accuracy
Pneumatic moving mechanism
Self-explanatory control panel with menu control in the display
Easy to read, bright LCD display
Automatic running of previously learned sub-programs (teaching function)
GO/NG feedback for each measurement
Mains-independent operation using rechargeable battery
Easy to handle due to low weight
RS-232 C data output
DIGIMATIC data input for digital dial indicators, e.g. for perpendicularity
Probe insert
Probe type setting option
Measurement of the probe
ball diameter
Store/reuse probe data
Change probe position
Statistical processing
Performance of simple
statistical processes
Histogram preparation
33 163 100
Measuring range
33 163...
mm
0 - 972
100
Stroke
Weight
mm
kg
Measuring
force
N
600
24
Standard accessories
No. 12 AAA 715 Calibration block
No. 12 AAA 634 Ball probe 5 mm
with holder
No. 226116
Adapter for holding
6 mm probes
No. 357651
Mains adapter
No. 226116
Dust cover
Technical data:
Linear Height
33 163...
Traversing range
(slider
travel)
Drive
method
mm
100
600
Incremen- Allowable
linear
tal value
deviation
selectable
mm
manual/
motorised
0.0001/
0.001/
0.01/0.1
Repeat
precision
Weight
balancing
2 sigma
Counter
weights
Drive
bearings
Floating
semifloating
Integrated
compressor
Power
supply
Operating
period
Weight
hrs
kg
AC adapter/
rechargeable approx. 5
battery
24
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
Tolerance evaluation
Tolerance/nominal value input
Output of the tolerance evaluation
Alarm function for exceeding of tolerance
581
5 years
w arranty
x
x
x
x
x
x
33 204...
40
50
70
100
130
200
Calibration
Cross-section
mm
005
007
010
015
020
030
15
16
20
28
30
40
x
x
x
x
x
x
4
4
5
5
6
8
33 204
5 years
w arranty
Calibration
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
582
Blade length x
stock length mm
33 208...
Angle
Cross-section
mm
25 x 20
40 x 28
002
004
90
90
6 x 2.5 / 3 x 2.5
8.5 x 3 / 4.5 x 3
33 208
5 years
w arranty
Blade length
mm
33 214...
Stock length
mm
60
010
40
Calibration
33 214 010
5 years
33 216...
001
19 x 14 x 3
Calibration
w arranty
33 216 001
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
5 years
Calibration
w arranty
Accuracy to DIN 875/0, stainless steel, fully hardened, edges and faces precisely ground
33 230...
Try square
33 232...
Flat steel square
005
007
010
015
020
005
007
010
015
020
40
50
70
100
130
Cross-section
mm
15
15
20
30
30
x
x
x
x
x
4
4
5
6
7
33 232
33 230
5 years
Accuracy 1, according to DIN 875/1, special steel, edges and faces finely
ground and machined
w arranty
Calibration
33 246
33 238...
Try square
33 240...
Try square
stainless steel
33 246...
Flat steel
square
33 248...
Flat steel square
stainless steel
75 x 50
100 x 70
150 x 100
200 x 130
250 x 165
300 x 200
400 x 265
500 x 330
007
010
015
020
025
030
040
050
007
010
015
020
025
030
040
050
007
010
015
020
025
030
040
050
007
010
015
020
025
030
040
050
Cross-section
mm
15
20
28
32
35
40
45
50
x
x
x
x
x
x
x
x
5
5
6
7
8
8
10
10
5 years
Calibration
w arranty
33 254
33 252
Blade length x
stock length mm
33 252...
33 254...
100 x 70
150 x 100
200 x 130
250 x 160
300 x 200
400 x 200
500 x 250
600 x 300
750 x 375
1000 x 500
010
015
020
025
030
040
050
060
075
100
010
015
020
025
030
040
050
060
075
100
Cross-section
mm
20 x
25 x
28 x
30 x
32 x
35 x
40 x
40 x
45 x
50 x
5
6
6
7
7
8
8
8
10
10
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
33 238
583
w arranty
33 258
33 256
5 years
33 258... without
wide, overlapping base
010
015
020
025
030
040
050
060
075
100
Cross-section
mm
010
015
020
025
030
040
050
060
075
100
20
20
20
25
25
30
30
30
30
30
x
x
x
x
x
x
x
x
x
x
5
5
5
5
5
5
5
5
5
5
5 years
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
Accuracy according to DIN 875/I, special steel, for centring roundstock such as discs and shafts, with mm graduation on the rule
584
w arranty
Calibration
33 262
Rule dimension
adjustment
mm
33 262...
100
150
200
250
300
010
015
020
025
030
Shaft max.
mm
mm
70
130
150
160
180
90
190
220
230
280
5 years
w arranty
Calibration
33 264
50
75
100
150
33 264...
005
007
010
015
Cross-section
mm
15
18
20
25
x
x
x
x
4
4
5
6
5 years
w arranty
Calibration
33 266
Blade length x stock
length mm
75 x 75
100 x 100
33 266...
007
010
Cross-section
mm
18 x 4
20 x 5
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
5 years
Calibration
w arranty
33 270
Blade length x stock
length mm
33 270...
Cross-section
mm
120 x 80
150 x 100
200 x 130
012
015
020
20 x 5
20 x 5
25 x 6
5 years
Calibration
w arranty
33 274
33 274...
33 275...
Cross-section
mm
120 x 80
150 x 100
200 x 130
001
002
003
005
006
007
20 x 5
20 x 5
25 x 6
3
33 275
5 years
x
x
x
x
x
33 280...
300
400
500
600
800
Cross-section
mm
030
040
050
060
080
30
30
30
30
30
x
x
x
x
x
5
5
5
5
5
33 280
Calibration
33 284
33 285
Blade length x
stock length mm
33 284...
33 285...
Width
mm
600 x 280
800 x 320
1000 x 380
060
080
100
060
080
100
35
35
35
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
Blade length x
stock length mm
585
33 304...
150 x 100
250 x 150
350 x 190
015
025
035
33 304
33 306...
200
300
400
020
030
040
33 306
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
586
33 310...
300
035
33 310
33 312...
250
300
025
033
33 312
33 316...
200
250
300
400
020
025
030
040
Cross-section
mm
22
25
25
30
x
x
x
x
5
5
5
5
33 316
5 years
w arranty
Calibration
33 320
Protractor head
mm
33 320...
Arm
mm
80
120
150
200
300
108
112
115
120
130
120
150
200
300
500
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
w arranty
Calibration
33 324
Protractor head
mm
33 324...
Arm
mm
100
150
200
250
110
115
120
125
150
300
400
500
5 years
5 years
w arranty
Calibration
with 3 interchangeable
stocks
33 340...
150/200/300
001
33 340 001
Accessories:
Replacement battery
Signal cable, 1 m
Signal cable, 2 m
Calibration
33 342 115
Stock length
mm
33 342...
Measuring range
Battery life
hrs
150
115
-360 - +360
2000
5 years
33 402 Scribers
with knurled steel body and screwed in steel points, point diameter
4 mm
w arranty
017
025
Overall length
mm
33 402...
Point type
175
250
017
025
straight
straight / 90 bend
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
Stock length
mm
587
5 years
33 403 Scriber
double end with plastic body
w arranty
Overall length
mm
33 403...
220
022
Point type
33 403 022
straight / 90 bend
5 years
33 404 Scriber
with sintered carbide tip, for marking tiles, stone, glass, hard steel,
shank 6 mm
Overall length
mm
33 404...
140
001
w arranty
33 404 001
5 years
33 405 Scriber
Cemented carbide, straight, with plastic body
w arranty
Length
mm
33 405...
160
001
33 405 001
5 years
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
588
Overall length
mm
33 406...
135
Replacement points, pack of 50.
001
002
w arranty
33 406 001
5 years
with interchangeable sintered carbide tip, with clip, the sintered carbide tip can be automatically extended and retracted and can be
resharpened
001
Overall length
mm
33 408...
Shank
mm
165
Replacement sintered carbide tip
001
002
10
-
002
5 years
33 450 Dividers
with square-cut legs, pushed through single joint (with reverse
action) and hardened tips, with rivet hinge
Length
mm
33 450...
150
200
250
300
015
020
025
030
w arranty
33 450
5 years
Length
mm
33 452...
150
200
250
300
400
500
015
020
025
030
040
050
w arranty
33 452
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
w arranty
33 456
Leg length
mm
33 456...
100
125
150
175
200
250
300
010
012
015
017
020
025
030
5 years
5 years
w arranty
33 458
Leg length
mm
33 458...
125
150
175
200
300
Replacement points,
special steel, per pair
012
015
017
020
030
101
w arranty
33 460
Length
mm
33 460...
150
200
250
300
015
020
025
030
5 years
w arranty
33 462
Length
mm
33 462...
125
150
200
250
300
012
015
020
025
030
5 years
Leg length
mm
33 464...
150
200
250
300
015
020
025
030
w arranty
33 464
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
5 years
589
5 years
w arranty
33 466
Arm length
mm
33 466...
150
200
300
015
020
030
Calibration
made of special steel, scriber jaws and tips hardened, finely ground
and lap polished, precise marking out due to parallel position of the
scriber jaws, with lock screw
Measuring range
mm
33 471...
Marking range
mm
Length of jaws
mm
Vernier
mm
0 - 150
0 - 200
0 - 300
001
002
003
300
400
600
45
45
45
1/10
1/10
1/10
33 471
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
33 474
590
Measuring range
mm
33 474...
500
1000
2000
Replacement tips, per pair
Sintered carbide tips
per pair
001
002
003
011
012
30 x 6
30 x 6
40 x 8
-
with roller
stainless steel, reading parts matt chrome plated
Hardened scriber point
with lock screw
resolution 0.05 mm
33 477...
Measuring range
mm
33 477...
Resolution
mm
0 - 200
0 - 400
Replacement scriber point
020
040
100
0.05
0.05
-
33 479...
Measuring range
mm
33 479...
Base
length mm
Resolution
mm
0 - 160
0 - 250
0 - 300
001
002
003
100
135
160
0.05
0.05
0.05
Measuring length
mm
33 481...
200
250
300
020
025
030
33 481
w arranty
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
5 years
w arranty
Calibration
33 504...
75
100
125
150
200
300
500
007
010
012
015
020
030
050
Cross-section
mm
22
22
22
22
30
30
40
x
x
x
x
x
x
x
6
6
6
6
6
6
7
5 years
Calibration
w arranty
33 510
33 510...
33 512...
150
200
250
300
500
1000
2000
015
020
025
030
050
100
200
015
030
050
-
5 years
with engraved wearproof graduation at the top and bottom 1/1 mm,
made of spring steel strip, hardened
Measuring length
mm
33 514...
300
500
1000
1500
2000
030
050
100
150
200
Calibration
w arranty
Cross-section
mm
28
30
30
40
40
x
x
x
x
x
33 514
0.8
1
1
2
2
particularly thick
cross-section
5 years
Calibration
w arranty
33 516
5 years
w arranty
33 517
Measuring length
mm
33 516...
33 517...
stainless steel
500
1000
1500
2000
3000
050
100
150
200
300
050
100
150
200
-
Cross-section
mm
30
40
40
50
50
x
x
x
x
x
6
8
8
10
10
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
Measuring length
mm
33 512
591
5 years
Calibration
w arranty
33 518
33 519
Measuring length
mm
33 518...
33 519...
stainless steel
500
1000
2000
3000
050
100
200
300
050
100
200
300
Cross-section
mm
25
30
40
40
x
x
x
x
5
6
8
8
5 years
w arranty
Calibration
33 520
Height gauges / Marking equipment / Squares / Straight edges and rulers / Compasses
33 524
592
Measuring length
mm
33 520...
33 524...
Scale graduation
500
1000
1500
2000
050
100
150
200
050
100
150
200
Cross-section
mm
40
40
40
40
x
x
x
x
5
5
6
6
5 years
w arranty
Calibration
33 530
33 531
Length
mm
33 530...
Cross-section
mm
33 531...
Cross-section
mm
500
1000
2000
005
010
020
40 x 8
50 x 10
70 x 14
005
010
020
30 x 6
40 x 8
60 x 12
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
34 020 001
34 020 002
34 020 004
Length
34 020...
Width
m
1
2
2
2
Number of
folds
Type
6
10
10
10
Varnished yellow
Varnished yellow
Varnished white/yellow,
Concealed rivets
Varnished white
mm
001
002
16
16
16
16
004
005
34 020 005
natural colours
spring-tempered special alloy
numbers and graduation etched in deep black
exactly latching, brass plated steel springs
Sections 1.4 mm thick
Length
m
34 024...
2
1
001
002
34 024
Width
mm
Number of folds
14
14
10
6
34 028...
2
1
001
002
34 028
Width
mm
Number of folds
15
13
10
10
Extendable length
m
34 036...
001
34 036 001
Closed length
m
1.07
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
593
Measuring length
m
34 038...
2
3
5
002
003
005
Calibration
Tape width
mm
Case size
mm
13
13
13
70 x 60 x 22
70 x 60 x 22
70 x 60 x 22
34 038
Measuring length
m
34 040...
3
5
10
003
005
010
Calibration
Tape width
mm
Case size
mm
15
25
25
68 x 68 x 33
68 x 68 x 33
72 x 75 x 40
34 040
34 042...
2
3
002
003
Calibration
Tape width
mm
Case size
mm
13
13
50 x 50 x 20
55 x 55 x 20
34 042
594
Measuring length
m
34 054...
2
3
5
002
003
005
Calibration
Tape width
mm
Case size
mm
13
13
16
60 x 58 x 19
60 x 58 x 19
75 x 70 x 26
5 years
34 059...
2
3
5
002
003
005
34 054
w arranty
Tape width
mm
Case size
mm
13
13
16
65 x 60 x 23
65 x 60 x 23
73 x 70 x 25
34 059
Measuring
length
m
34 066...
3
5
8
003
005
008
Calibration
Tape width
Case size
mm
mm
34 066...
Replacement tapes
56 x 56 x 19
65 x 65 x 19
73 x 73 x 25
050
080
12.7
19
25
34 066
.
-
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Measuring length
m
34 068...
2
3
002
003
Calibration
34 068
Tape width
mm
Case size
mm
13
13
65 x 65 x 21
65 x 65 x 21
Measuring length
m
34 070...
2
3
5
002
003
005
Calibration
34 070
Tape width
mm
Case size
mm
13
13
16
65 x 55 x 25
65 x 55 x 25
85 x 70 x 25
Calibration
R
34 072...
003
34 072
Tape width
mm
Case size
mm
13
60 x 80 x 20
for external, internal, depth, circumference measurements and marking, white, stable measuring tape with automatic measurement (3
point fixing) blocks the scale against tension and pressure, measuring
and marking, in practice often done immediately after each other,
become purely mechanical processes in which the accuracy is determined by the tool and not the eye.
Measuring length
m
34 080...
2.1
3.1
002
003
34 080 002
Tape width
mm
Case size
mm
16
16
56 x 51 x 23
71 x 56 x 24
34 080 003
34 102...
10
20
30
010
020
030
Calibration
Tape width
mm
Case size
mm
10
10
10
80 x 80 x 20
100 x 100 x 20
110 x 110 x 20
34 102
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Measuring length
m
595
Surveyors tape
Case made of highly shockproof plastic. Good handling due to large
folding crank handle with parked position.
Calibration
available on request:
AF:
BN:
A:
CH:
F:
B:
M:
C:
34 111
Length
m
34 111...
10
20
25
30
50
010
020
025
030
050
596
Length
m
34 119...
10
20
25
30
50
010
020
025
030
050
34 119
34 121
Measuring tape, polyamide coated, mm graduation, EC Gen. II, can be calibrated 1 Tempered spring steel tape
made of C75 carbon steel
2 Phosphate coat as antiLength
34 121...
m
corrosion protection
.
3 Yellow synthetic resin
10
010
enamel, baked
15
015
4 Printed graduation with
20
020
red metre figures
25
025
5 Polyamide coating as wear
30
030
protection
50
050
34 123
Measuring tape made of glass fibre, cm graduation, EC Gen. II, can be calibrated
Length
m
34 123...
10
15
20
25
30
010
015
020
025
030
H:
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
ergonomically designed
pistol grip handle with
raised soft rubber naps
Calibration
Left-handed or right-handed?
No problem
34 125...
20
25
30
50
020
025
030
050
34 125
34 127...
20
25
30
50
020
025
030
050
Length
m
34 131...
20
25
30
50
020
025
030
050
34 131
34 133...
20
25
30
50
020
025
030
050
34 133
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Length
m
34 127
597
34 144...
60 - 950
940 - 2200
2190 - 3460
3450 - 4720
4710 - 5980
Types made of stainless steel
001
002
003
004
005
available on request
measuring range
mm
Resolution
mm
20 - 300
300 - 700
700 - 1100
1100 - 1500
1500 - 1900
0.1
0.1
0.1
0.1
0.1
34 144
Weight
g
34 210...
300
001
.
34 210 001
Colour
34 212...
.
white
red
001
002
Line thickness
mm
Material
1.2
1.7
Perlon
Polyamide
34 212
598
Type
34 214...
001
010
012
020
34 214
34 220...
150
200
250
300
015
020
025
030
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
34 302
Length
mm
34 302...
300
400
500
600
800
1000
030
040
050
060
080
100
Hollow section, powder coated surface, unbreakable, barrelshaped Plexiglas vials, measuring accuracy 1 mm per 1000 mm,
cross-section 50 x 22 mm
34 306
Length
mm
34 306...
400
500
600
800
1000
040
050
060
080
100
Length
mm
34 309...
300
400
500
600
800
1000
030
040
050
060
080
100
Slope
34 320
Length
mm
34 320...
400
600
800
040
060
080
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
34 309
599
Adhesive magnets
Length
mm
34 322...
400
600
1000
040
060
100
34 322
34 325
34 325...
600
800
1200
060
080
120
600
with angle measurement and strong adhesive magnets, hollow section, silver anodised, with shockproof plastic caps, barrel-shaped
vials, both vials for normal measurements, rotatable vial for measurement of angles, angle scale 90 - 0 - 90 & tile 0 - 50 %, tolerance
of the angle measuring device 3 %
34 326
Adhesive magnets
Length
mm
34 326...
400
600
040
060
34 328
Length
mm
34 328...
250
025
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
34 330
Length
mm
34 330...
500
005
001
004
3
Display in degrees or percent
Length
mm
34 331...
600
1200
001
004
Type
.
DNM 60 L
DNM 120 L
34 333 043
34 333 060
Blade length x stock length
mm
34 333...
430
600
Bag for Prod. No. 34 333 043...
Bag for Prod. No. 34 333 060...
043
060
243
260
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
601
34 334 005
Vertical vial
Slider
Electricians scale
Slider
Horizontal vial
CEILING
3
WALL SOCKET
FLOOR SOCKET
WASHBASIN
CEILING
DOORL SOCKET
602
CUPBOARD/CABINET
Complete scale
max. measuring
tolerance
max. measuring
tolerance
cm
in standard
position
for inverted
or vertical
measurement
80
34 334
Accuracy in
normal position
Accuracy when
turned over
Section weight
mm/m
mm/m
g/m
0.5
590
.
005
34 336
Reading height
mm
34 336...
200
001
mm
Height
mm
20
330
34 338 Hose
suitable for water level No. 34 336...
Length
m
34 338...
25
012
.
34 338
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
34 344...
160
200
250
300
160
200
250
300
160
200
250
300
016
020
025
030
116
120
125
130
216
220
225
230
Accuracy
mm/m
0.3
0.3
0.3
0.3
0.1
0.1
0.1
0.1
0.02
0.02
0.02
0.02
Width x Height
mm
42
42
42
42
42
42
42
42
42
42
42
42
x
x
x
x
x
x
x
x
x
x
x
x
Calibration
34 344
42
42
42
42
42
42
42
42
42
42
42
42
Length
mm
34 348...
60
90
060
090
Accuracy
mm/m
Width x Height
mm
0.2
0.1
42 x 42
42 x 42
Calibration
34 348
Length
mm
34 350...
100
150
200
100
150
200
150
200
010
015
020
110
115
120
215
220
Accuracy
mm/m
Width
mm
0.3
0.3
0.3
0.1
0.1
0.1
0.02
0.02
34
42
42
34
42
42
42
42
Calibration
34 350
TOOLSibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
603
34 390 DS 20 level
robust, automatic construction level with watertight full metal
housing, bright optics and well dampened, insensitive compensator,
adjustable horizontal circle, fine lateral movement can be endlessly
operated from both sides, a target sight makes targeting easier.
For suitable tripod, see Prod. No. 34 392 010
Magnification
Levelling
accuracy
mm/km
Horizontal
circle
Weight
20 x
0.5
+/- 2.5
360/400 g
1.7
39 390...
kg
020
39 390 020
34 390 DS 28 level
watertight, automatic engineers level, with high-quality, high-intensity
quality optics, precisely machined mechanics fitted on the metal
housing, insensitive, well damped and very precise compensator,
adjustable horizontal circle, fine lateral movement can be endlessly
operated from both sides, a target sight makes it targeting easier.
For suitable tripod, see Prod. No. 34 392 010
Magnification
Levelling
accuracy
mm/km
Horizontal
circle
Weight
28 x
0.5
+/- 1.5
360/400 g
1.7
39 390...
kg
39 390 028
028
604
Length
m
34 392...
1.10 - 1.85
010
Weight
kg
5.3
34 392 010
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
self-levelling
suitable for all levelling work
long working range due to large splay angle (horizontal 120,
vertical 140)
horizontal and vertical lines can be individually switched on
clear, bright laser lines for precise transfer of the vertical and
horizontal lines
levelling control with flashing lines
can also be used for manual tilt operation
automatically switches off
easy to use as all functions are controlled using one button
with aligning disc for simple diagonal laying and plumb transfer
for stationary operation fits on all standard commercial tripods with
1/4 threaded mounting
working range up to max. 10m (depending on the light conditions)
levelling accuracy 0.3 mm/m
levelling range 4
levelling time < 4 sec
power supply 3 x 1.5 V LR6 (AA batteries)
operating period approx. 12h (with cross line mode)
weight 450 g
Scope of supply:
with aligning disc, bag and batteries
Housing
mm
34 398...
118 x 57 x 89
002
34 398 002
with automatic levelling
34 400 001
34 400...
400
001
TOOLS
605
606
Laser function
Point function
Line function
Plumb function
Measuring process
Transfers a defined point Laser beam rotates horifrom the floor onto the
zontally through 360
ceiling
about its vertical axis
Range of uses
Horizontal levelling:
e.g. align pipes, rails...
Vertical levelling:
e.g. install shelf
systems, panelling,
stairs, railings...
Vertical projection:
e.g. working without
markings, drilling holes
in a line, aligning components...
Laser
measuring
instrument type
Rotating function
Height
cm
34 405...
105 - 160
001
Weight
kg
5.0
34 405 001
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Automatic pendulum rotating laser works at a high speed with maximum accuracy and reliability. The pendulum levelling system of the
self-levelling means there is no waiting until the motor has aligned the
laser, you can turn and changeover the laser without losing the levelled laser beam. The multi-functional housing can be tilted, which
then enables unevenness up to 12 slope to be balanced out. The
complete laser housing is mounted on the stainless steel U-brackets
with sliding sleeves. This design enables the laser beam to be vertically repositioned directly at the unit by approx. 12 cm. The rotating
laser beam together with the receiver also enable easy working over
long distances outdoors.
Scope of supply: LAPR 100 rotating laser, receiver with holder, laser
goggles, target plate with scale, in plastic case
Function
34 403...
.
Levelling accuracy: +/- 0.3 mm/m
Laser wavelength: 635 nm
Range (radius): 80 m
Battery life: approx. 40 hrs.
Batteries (included): 3 x AAA
010
The LAX 100 was specially developed for all building interior finishing
work. With cross line function. Individually controllable vertical and
horizontal line projection. The side reference laser point, which is
arranged precisely at right angles to the laser line, can be switched on
individually. A beam splitter prism can be attached to its aperture and
be used for vertical all-round levelling. The 5 tolerance of the selflevelling pendulum can compensate for extremely slanting surfaces of
up to 12 slope by manual adjustment of the housing. The two stainless steel U-brackets are transport and grip handles as well as sliding
rails for height adjustment (approx. 12 cm) of the laser body.
Scope of supply: LAX 100 cross line laser, beam splitter prism,
laser goggles and target plate with scale, in plastic case
Function
34 403...
.
020
Function
34 403...
.
Levelling accuracy: +/- 0,1 mm/m
Laser wavelength: 635 nm
Range (radius) with receiver: 150 m
Battery life: approx. 120 hrs.
Batteries (included): 3 x AA
030
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
607
Laser rangefinder
Measuring with laser precision, compact dimensions, handy, powerful receiving optics, 1 mm display, measuring range from 0.2 up to
200 m, results in fractions of a second, non-contact, without anyone to help. At the press of a button you can see WHERE you are
measuring to.
Supplied in practical bag, incl. battery.
34 500 004: A5
The standard model Leica DISTO A5 has a convincing ergonomic
shape and non-slip soft grip. With its unique endpiece, the numerous additional functions and built in telescope finder you are ideally prepared for all measuring situations. The most frequent
measuring situations can be quickly and easily opened using
direct buttons.
Product features:
Ergonomic design with soft grip
Integrated telescope finder with double magnification
Fold out endpiece with automatic detection
Volume calculations
Indirect height / distance measurement
Direct buttons
3
34 500 004
34 500 007: A3
608
Measuring range
m
Type
0.05 - 200
0.05 - 100
A5
A3
34 500...
.
004
007
Measuring accuracy
mm
2
3
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Scope of supply:
Protective bag
Holding strap
4 x 1.5 V (AAA) batteries
34 522 001
100 mm
3
Illustrated with actual size
Measure button
Memory addition
Memory recall
Memory subtraction
Continuous pointer mode
Delete button
On - Off button
Measuring range
34 522...
m
0.05 - 50
001
Measuring accuracy
typ. / max.
mm
Measuring time
min. / max.
s
Weight
1.5 / 5
0.5 / 4
170
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
609
Measuring range
m
34 524...
0.3 - 150
0.3 - 150
006
060
34 524 006
Measuring accuracy
mm
34 524 060
Scope of supply:
Protective bag
2 marker pens
Batteries
Instructions for use
610
34 601 001
34 601...
100
001
Size
mm
Weight
g
80
204 x 83 x 30
240
Also localises
wood and plastic
Scope of supply:
Protective bag
4 x 1.5 V batteries
34 602...
100
100
Size
mm
Weight
g
277 x 98 x 98
800
34 602 100
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
for direct reading of all tolerance values according to the ISO recommendations, contains the complete list of all ISO tolerances used at
home and abroad up to nominal size 500 mm = 6400 tolerance
pairs, in dustproof plastic housing
35 102...
Size
mm
.
001
35 102 001
60 x 30 x 110
35 104 Converter
for converting from inches into millimetres and vice versa.
In dustproof plastic housing
35 104...
Size
mm
.
001
60 x 30 x 110
35 104 001
Size
mm
.
001
60 x 30 x 110
35 106 001
35 110 001
35 110...
Size
mm
.
001
280 x 90
35 114...
Size
mm
.
001
265 x 55
35 116 001
35 116...
Size
mm
.
001
255 x 50
35 120...
.
001
35 120 001
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Gauges
combines a twist drill grinding gauge 118, screw cutting gauge, square
and hexagon angles 55 and 60, drill bit diameter up to 60 mm
611
Size
mm
.
001
110 x 45
35 126...
Size
mm
.
001
35 126 001
80 x 45
35 130...
001
Size
mm
2.93
60 x 25
35 130 001
35 134...
Size
mm
.
001
35 134 001
60 x 25
Thread
Size
mm
35 138...
.
Metric 60
Whitworth 55
75 x 20
75 x 25
001
002
35 138
35 142
35 142...
Number of blades
Pitch
mm
52
24
28
6
30
0.25 - 6.0
0.25 - 6.0
-
Gauges
612
Metr. 60 / Whtw. 55
Metr. 60
Whtw. 55
Whtw. - Pipe (BS) 55
US thread 60
(UNC + UNF)
001
002
003
004
005
Threads
inch
62 62 28 42 -
4
4
8
4
Size
mm
65
65
65
65
65
/
/
/
/
/
20
10
10
10
10
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Relief angle
Size
mm
35 148...
.
0 - 30
001
35 148 001
85 x 40
Standard
strength steel
mm
35 152...
Stainless steel
Number of
blades
35 152...
35 152
- 7
001
101
17
7.5 - 15
002
102
16
15.5 - 25
003
103
15
Standard
strength steel
35 158...
0.05 - 0.5
0.05 - 1
0.05 - 1
0.1 - 2
001
002
003
004
Stainless
steel
35 158...
101
102
103
-
Number of
blades
Size
mm
8
13
20
20
100
105
105
105
x
x
x
x
14
15
15
25
35 158
...002
35 159...
.
002
003
Number of
blades
13
20
Blade length
mm
200
200
Gauges
Measuring range
mm
0.05 - 1
0.05 - 1
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
613
35 162
Thickness mm
35 162...
Thickness mm
35 162...
0.2
0.25
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
020
025
030
040
050
060
070
080
090
100
.
0.01
0.02
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.1
0.15
001
002
003
004
005
006
007
008
009
010
015
35 164 Holder
for feeler stock Prod. No. 35 162... in separate pieces
35 164...
13.0
001
35 164 001
Size
mm
120 x 15
Wall-mounted holder
LxBxH
35 165...
340 x 95 x 110
017
35 165 017
Gauges
614
Foil thickness
mm
35 168...
Brass
MS 63
0.025
0.05
0.075
0.1
0.15
0.2
0.25
0.3
0.5
001
002
003
004
005
006
007
010
35 168...
Steel,
unalloyed
101
102
103
104
105
106
107
-
35 168...
Steel,
stainless
35 168
201
202
203
204
205
206
207
208
210
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
35 172...
0-3
0-5
001
002
Length
mm
170
170
35 172
35 176...
0.45 - 1.50
1.50 - 3.00
001
002
Number of pins
Size
mm
20
16
65 / 30
65 / 20
35 176
35 180...
0.1 - 10
001
Pitch
mm
Size
mm
0.1
190 x 75
35 180 001
35 182...
0.01
001
Size
mm
35 182 001
100 x 60
Resolution
mm
35 186...
0.01
001
Size
mm
110 x 80
35 186 001
Weld thickness
mm
35 188...
3 - 12
001
Size
mm
80 x 45
35 188 001
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Gauges
615
36 101
Nominal
mm
2
2.5
3
3.5
4
5
6
6.5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
36 101...
Nominal
mm
27
28
30
32
34
35
36
38
40
42
44
45
46
48
50
52
55
60
62
65
70
72
75
80
85
90
95
100
.
003
006
009
012
015
018
021
024
027
030
033
036
039
042
045
048
051
054
057
060
063
066
069
072
075
078
081
084
36 101...
.
087
090
093
096
099
102
105
108
111
114
117
120
123
126
129
132
135
138
141
144
147
150
153
156
159
162
165
168
616
Calibration
36 108
Measuring range
mm
36 108...
1 - 5
0.5 - 5
1 - 10
001
003
005
Increments
of
mm
0.1
0.05
0.1
Number of test
gauges
Accuracy grade
41
91
91
2
2
2
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Accuracy 2
from 0.30 to 0.99 mm without facet
from 1.00 to 10.00 with one facet
from 10.01 to 10.00 with facet on both sides
Calibration
When ordering:
Please quote product number + 4-digit diameter
e.g. 6.05 mm = Order number 361090605
e.g. 11.22 mm = Order number 361091122
mm
0.30
0.51
1.00
3.01
6.01
10.01
12.01
14.01
16.01
19.01
0.50
0.99
3.00
6.00
10.00
12.00
14.00
16.00
19.00
20.00
36 109
Pitch
Length
mm
mm
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
0.01
40
40
70
70
70
70
70
70
70
70
Holds two test gauges within a tolerance zone (e.g. go and no-go
size), better handling of the pin gauges, especially with small
diameters
for
pin gauges
mm
1
2
4
6
8
to
to
to
to
to
36 110...
36 110
2
4
6
8
10
002
004
006
008
010
Calibration
36 112
36 112...
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
22
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
022
Nominal size
mm
36 112...
24
25
26
28
30
32
34
35
36
38
40
42
44
46
48
50
55
60
024
025
026
028
030
032
034
035
036
038
040
042
044
046
048
050
055
060
Nominal size
mm
65
70
75
80
85
90
95
100
125
175
225
36 112...
.
065
070
075
080
085
090
095
100
125
175
225
Note:
Tolerance class 0:
Tolerance class 1:
Tolerance class 2:
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Nominal size
mm
617
Calibration
36 124
Fit 6 g, for metric ISO coarse thread to DIN 13, right-hand thread
36 127
3
4
5
6
8
10
12
14
16
18
20
24
27
30
33
36
39
42
36 124...
Plug gauges
36 126...
Go ring
030
040
050
060
080
100
120
140
160
180
200
240
270
300
330
360
390
420
030
040
050
060
080
100
120
140
160
180
200
240
270
300
360
420
36 127...
No-go ring
030
040
050
060
080
100
120
140
160
180
200
240
270
300
360
420
36 126
Calibration
36 132
36 132...
Plug gauge
618
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
6
8
8
8
10
10
10
12
12
12
14
14
14
16
18
20
20
22
24
24
26
27
27
28
30
30
30
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
0.75
0.5
0.75
1
0.75
1
1.25
1
1.25
1.5
1
1.25
1.5
1.5
1.5
1
1.5
1.5
1.5
2
1.5
1.5
2
1.5
1
1.5
2
060
080
081
082
100
101
102
120
121
122
140
141
142
161
181
200
201
220
240
241
260
270
271
280
300
301
302
36 138...
Go rings
36 138
060
080
081
082
100
101
102
120
121
122
140
141
142
160
180
200
201
220
240
241
260
270
271
280
300
301
302
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
5 years
Number /
set
36 202...
32
001
002
003
47
87
103
Tolerance
class
Qty
Size / range
mm
0
1
2
1
9
9
9
3
1
1
19
8
10
9
1
9
50
17
10
1
49
49
4
1.005
1.01 1.09
1.1
1.9
1
9
10
- 30
50
1.005
1.01 1.19
1.2
1.9
1
- 10
20
- 100
0.5
1.001 - 1.009
1
1.49
1.5
9.5
10
- 100
1.005
1.010 - 1.490
0.500 - 24.50
25.000 - 100.00
004
005
006
0
1
2
007
008
009
0
1
2
014
015
016
0
1
2
w arranty
Calibration
Increment
mm
0.01
0.1
1
10
36 202
0.01
0.1
1
10
0.001
0.01
0.5
10
0.010
0.500
25.00
Calibration
All gauge block sets are supplied with a factory test calibration certificate which documents traceability to national standards. In high-quality
wooden box.
36 210...
Tolerance
class
Qty
.
32
47
87
103
001
002
003
0
1
2
004
005
006
0
1
2
007
008
009
0
1
2
010
011
012
0
1
2
Size / range
Increment
mm
mm
1
9
9
9
3
1
1
19
8
9
10
1
1
9
49
19
10
1.005
1.01 1.09
1.1
1.9
1
- 9
10
- 30
60
1.005
1.01 1.19
1.2
- 1.9
1
- 9
10
- 100
1.001 - 1.009
1.01 1.49
0.5 - 9.5
10
- 100
0.001
0.01
0.5
10
1
49
49
1.005
1.01 1.49
0.5
- 24.5
0.01
0.5
25 - 100
0.01
0.1
1
10
36 210
0.01
0.1
1
10
25
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Number /
set
619
5 years
Calibration
w arranty
36 214 003
Nominal size
36 214...
Number in set
.
1510`/3020`
4530`/5000`
6040`/7550`
9000`
003
Size
mm
36 215...
003
Calibration
Number in set
36 215
.
8
Calibration
620
36 217
high-purity material
considerably more wear resistant and lighter than steel
10 times longer durability
anti-magnetic
resistant against liquids such as oil, acids, alkaline solutions
Accuracy grade 0: for checking and setting measuring equipment with very
high accuracy
36 220
36 220...
Ceramic
001
003
005
007
009
011
013
015
017
019
021
023
025
027
029
031
033
035
037
039
041
043
045
047
049
051
053
055
057
059
061
063
065
067
069
071
073
075
077
079
081
083
085
087
089
091
093
095
097
099
101
103
105
107
109
111
113
115
117
119
121
123
125
127
129
131
133
135
137
Nominal size
mm
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5
10
10.5
11
11.5
12
12.5
13
13.5
14
14.5
15
15.5
16
16.5
17
17.5
18
18.5
19
19.5
20
20.5
21
21.5
22
22.5
23
23.5
24
24.5
25
30
40
41.3
50
60
70
75
80
90
100
125
131.4
150
175
200
243.5
250
281.2
300
400
500
600
700
800
900
1000
36 217...
Steel
139
141
143
145
147
149
151
153
155
157
159
161
163
165
167
169
171
173
175
177
179
181
183
185
187
189
191
193
195
197
199
201
203
205
207
209
211
213
215
217
219
221
223
225
227
229
231
233
235
237
239
241
243
245
247
249
251
253
255
257
259
261
263
265
267
269
271
273
275
36 220...
Ceramic
139
141
143
145
147
149
151
153
155
157
159
161
163
165
167
169
171
173
175
177
179
181
183
185
187
189
191
193
195
197
199
201
203
205
207
209
211
213
215
217
219
221
223
225
227
231
233
235
237
239
241
-
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Nominal size
mm
0.5
1
1.001
1.002
1.003
1.004
1.005
1.006
1.007
1.008
1.009
1.01
1.02
1.03
1.04
1.05
1.06
1.07
1.08
1.09
1.1
1.11
1.12
1.13
1.14
1.15
1.16
1.17
1.18
1.19
1.2
1.21
1.22
1.23
1.24
1.25
1.26
1.27
1.28
1.29
1.3
1.31
1.32
1.33
1.34
1.35
1.36
1.37
1.38
1.39
1.4
1.41
1.42
1.43
1.44
1.45
1.46
1.47
1.48
1.49
1.5
1.6
1.7
1.8
1.9
2
2.5
3
3.5
621
Number/set
36 221...
Calibration/tolerance
class
.
32
32
32
47
47
47
Calibration
010
011
012
020
021
022
0
1
2
0
1
2
36 221 020
Calibration
5 years
w arranty
36 223
Number/set
36 223...
Tolerance class
Qty
Size / range
mm
Increment
mm
1
9
9
9
3
1
1
19
8
10
9
1
9
50
17
10
1
49
49
4
1.005
1.01 1.09
1.1
1.9
1
9
10
- 30
50
1.005
1.01 1.19
1.2
1.9
1
- 10
20
- 100
0.5
1.001 - 1.009
1
1.49
1.5
9.5
10
- 100
1.005
1.010 - 1.490
0.500 - 24.50
25.000 - 100.00
0.01
0.1
1
10
0.01
0.1
1
10
0.001
0.01
0.5
10
0.010
0.500
25.00
622
32
001
002
0
I
47
004
005
0
I
87
007
008
0
I
103
014
Contents
Qty
36 226...
14
22
140
220
.
36 226
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Size
Designation
36 228...
Holder
Holder
Holder
Holder
Holder base
001
002
003
004
005
007
009
010
36 226 140
36 226 220
consisting of qty consisting of qty
mm
15
5
15
50
- 60
- 100
- 160
- 250
35
Radius 5
Radius 12
Radius 20
Half-round jaw
Half-round jaw
Half-round jaw
1
1
1
1
1
2
-
1
1
1
1
2
2
2
5 mm
12 mm
15 mm
36 228
Setting rings
mm
mm
30.0/41.3/131.4
41.3/131.4/243.5
4 / 25
4 / 25
for callipers up
to
mm
36 230...
.
001
002
200
300
36 233...
10
011
36 233 001
5 years
36 240 003
36 240...
Ceramic
5.1-25
001
011
5.1-100
003
36 240 011
Length
mm
5.1/10.3/15.0/20.2/25.0
5.1/10.3/15.0/20.2/25.0/50.0/75.0/100.0
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
w arranty
623
Digit height
mm
36 300...
4.5
001
Counting range
.
4-digit
36 300 001
Digit height
mm
Stroke direction
4.5
4.5
36 303...
Counting range
.
001
002
36 303 002
6-digit
6-digit
Digit height
36 306...
Counting range
mm
4.5
001
4-digit
6000
624
for easy recording of rotational speeds and surface speeds in all types
of machines, measurements can be taken either with no contact (optical
with reflex mark) or directly (mechanical with adapter)
Technical data:
Measuring range:
Speed:
ft/min,
Lengths:
Precision:
Supply:
Memory function:
Scope of supply:
Measuring device, adapter, prod, hollow cone, metering wheel,
reflex marks, batteries, transport case, instructions for use, calibration
certificate
Measuring range
36 313...
.
0 - 99999 RPM optical
0 - 19999 RPM mechanical
001
Dimensions
mm
36 313 001
175 x 60 x 28
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
ABS case, with attached hanging cord, the wind up mechanism of the
shockproof pin anchor mechanism is located on the back
Graduation
36 316...
sec
0.2
001
Display time
Case
min
mm
30
55
36 316 001
Graduation
36 318...
sec
0.1
001
Display time
Housing
min
mm
15
55
3
36 318 001
Resolution
min
36 320...
0.01
001
Display time
min
99999.99
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
36 320 001
625
Magnification
37 004...
Lens type
Lens
mm
biconvex
biconvex
biconvex
aplanatic
25
25
25
22.8
.
5
7
10
10
fold
fold
fold
fold
005
007
010
100
37 004 100
37 006...
Lens type
Lens
mm
Pouch
37 005...
22.8
22.8
22.8
16.3
16.3
023
023
023
016
016
22.8
023
8 - fold
008
plano-convex
10 - fold
010
plano-convex
12 - fold
012
plano-convex
10 - fold
018
plano-convex
20 - fold
020
plano-convex
Optics as above; however, frame and casing made of robust, black plastic
10 - fold
110
plano-convex
.
37 006 110
Magnification
626
37 007...
Lens type
Lens
mm
biconvex
biconvex
30
30
.
3 - 6 - 9 - fold
4 - 6 - 10 - fold
009
010
37 007 009
Magnification
37 008...
Lens type
Lens
mm
6 - / 10 - fold
010
aplanatic
22.8
37 008 010
Magnification
37 009...
Lens type
Lens
mm
Pouch
37 005...
plano-convex
plano-convex
plano-convex
22.8
22.8
16.3
023
023
016
2.99
2.99
2.99
.
3 - / 3 - fold
4 - / 6 - fold
10 - / 10 - fold
003
004
010
37 009
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
with biconvex (Prod. No. 37 010 025 only) or aplanatic glass lenses.
Highly polished nickel plated brass frame with anti-tarnish protection
and black plastic shaped handle.
37 010 040
37 010 080
Magnification
37 010...
Lens type
Lens
mm
biconvex
65
aplanatic
aplanatic
bifocal
65
90
75/20
.
2.5 - fold
025
as above; however, with 2 aplanatic lenses each
4 - fold
040
2.5 - fold
080
2.5 - 5 - fold
100
37 010 100
Magnification
37 012...
Lens type
Lens
mm
aplanatic
aplanatic
aplanatic
28
28
18
.
8 - fold
10 - fold
20 - fold
008
010
020
All-metal design
37 012...
37 018...
Lens
mm
.
4 - fold
8 - fold
10 - fold
15 - fold
004
008
010
015
37 018
50
30
22.8
22.8
37 020...
Lens type
Lens
mm
37 020 004
4 - fold
004
aspheric
60
as above; however, diameter 45 mm, height 50 mm, with exchangeable scales
8 - fold
008
as 37 020 008; however, measuring magnifier with removable measuring scale, graduation 0.1 mm,
scale length 15 mm with 150 graduation marks.
10 - fold
100
aplanatic
30
37 020 008
37 020 100
37 024...
.
2 -fold
020
2.5-fold
025
3 -fold
030
Replacement silicate lenses for peak head loupe magnifiers 37 024...
2 -fold
120
2.5-fold
125
3 -fold
130
...120 to ...130
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Magnification
627
Magnification
37 028...
Lens
mm
.
3,5 - fold
5 - fold
10 - fold
035
050
100
60
60
30
37 028
040
37 030
4-fold
6-fold
8-fold
10-fold
12-fold
15-fold
040
060
080
100
120
150
Lens type
628
Glass / as
Glass / ap
Glass / ap
Glass / ap
Glass/bi-pl
Glass/bi-pl
Lens
mm
55
30
30
22.8
16.3
16.3
120
37 038...
Lens type
Lens
mm
6-fold
060
biconvex
22.5
8-fold
080
biconvex
17.5
10-fold
100
biconvex
14.5
12-fold
120
biconvex
12.5
Type as above; however, with aplanatic precision silicate optics.
Round cutout with measuring scale, graduation 0.1 mm, scale length 10 mm with 100 graduation marks.
8-fold
008
aplanatic
16.3
Pouch
37 039...
37 038 008
060
080
100
120
.
080
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Magnification
37 042 002
37 042...
Overall length
mm
.
40 - 50 - 60 - fold
Lighting unit
002
006
37 042 006
150
-
37 042 Micro-magnifier
37 048 130
Magnification
37 048...
Lens type
Lenses
mm
biconvex
biconvex
aplanatic
100
75
65
aspheric
100 x 75
.
2.5-fold
025
3 -fold
030
4 -fold
040
as above; however, with square lightweight lens
3 -fold
130
37 055...
Lens type
.
2 - fold
002
2 - fold
003
2 - fold
Energy-saving lamp
7W
004
008
Illumination type
yes
biconvex
Energy-saving lamp
7W
biconvex
Halogen lamp
50 W / 12 W
biconvex
incandescent lamp 60 W
suitable for Product No.: 37 055 002
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
629
37 056
Magnification
37 056...
Lens type
Illumination type
with
Arms length
mm
12 W energysaving lamp
50 W
Halogen lamp
900
2 - fold
012
biconvex
2 - fold
013
biconvex
900
630
Power
W
37 090...
30
010
37 090 010
37 092...
3.0
5.4
030
050
Length
mm
500
500
37 097 Stereomicroscope
Stand with column and fine adjustment on both sides, robust and stable
Magnification 20x and 40x
Display field D = 10 mm and 5 mm
Prism head with 45 eyepiece tube, 360 rotatable
Interocular distance can be adjusted between 51 and 75 mm
Ocular tube with diopter compensation
WF 10x eyepieces with eyecups
Objective revolver with 2x and 4x objectives
Reflected and transmitted light illumination 12 V/10W
Working distance 55 mm
max. object height 45 mm
Glass and plastic plate black/white
37 097...
37 097...
.
Microscope
Eyepiece 15 x
Eyepiece 20 x
Eyepiece WF 10x (1 No.)
with graticule, scale interval 0.05 / 0.025 mm
010
015
020
030
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
37 100 010
Working distance
mm
37 100...
105
010
Binocular
Inclined tube
Object height
mm
Eyepieces
Magnification
45
360 rotation
51 - 75
adjustable
75
WF 10x with
eyecups
7x to 45x
37 120 010
Working distance
mm
37 120...
89
010
Binocular
Heightadjustable range
Weight
kg
Eyepieces
Magnification
45
50 mm
54 - 76
adjustable
6.3
WF 10x with
eyecups
6x to 50x
Designation
37 125...
Ring light*
009
37 125 009
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
631
37 130
3
Total magnification
37 130...
.
30x (2x objective
and 15x eyepiece)
010
50 x 50
Space-saving and user-friendly table-top projector with integrated digital X-Y display, as well as digital angle display in degrees or decimal.
Ergonomically perfected fast and fine adjustment of the stage
632
Optional accessories:
(see table of accessories 37 260...)
Model
37 260...
PJ-A3005
PJ-A3010
015
020
Measuring range
x/y axis
.
150 x 50 mm
200 x 100 mm
37 260
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
37 260...
.
Projection lenses
10 x
20 x
50 x
100 x
Holder with clamp
100
102
105
110
...150
...100 - ...110
140
150
...160
Adapter plates
for fixing the rotary table,
holder with clamp and centre
support (PJ-A3010 F-200)
160
...140
170
...170
37 270 011
Type
37 270...
37 270 010
.
Table-top version
Built-on version
010
011
37 272...
s = 1 m
010
Brightness
Lux
30 to 500
1000 mm/s
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
633
Measuring range
37 302...
Accuracy
Resolution
C
mm
2.5 %rF
0.1
70
182 x 64 x 40
C
-200 ... +1370
001
37 302 001
Operating life
Size
634
Measuring range
37 306...
Accuracy
Resolution
C
-50 to +1000
37 306 002
002
Operating life
Size
mm
200
182 x 64 x 40
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Accessories
37 309...
suitable for
(Testo)
Type
37 302
37 306
37 310 002
37 314
37 320
(625)*
(925)
(830)
(845)
(913)
Top-Save
Radio module
Radio handpiece
Surface sensor
082
085
087
089
091
Surface sensor
022
Surface sensor
113
angular, with handpiece and cable with spring thermal element, also for uneven surfaces
Immersion,
penetration sensor
032
Air sensor
Surface sensor
bent by 90
119
122
Humidity module
Plug-in power supply unit
Log printer
125
128
134
Gooseneck tube
Magnetic attachment
Reflector attachment
Decabon tube
Case
150
153
156
159
161
37 309 Accessories
087
113
022
032
119
122
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
* 37 302 (625), accessories can only be used in conjunction with radio handpiece 087.
635
(830)
for non-contact measurements
Fast recording of readings
Measuring dot marking with laser beam
Adjustable alarm limit values
Acoustic and optical alarm if limit value exceeded
Good handling due to handgun design
Illuminated display
Adjustable emission factor (0.2 ... 1.0)
001:
with 1-point laser measuring dot marking
002:
with 2-point measuring dot marking and option to connect
external sensors
37 310 001
Measuring range
37 310...
37 310 002
Operating
life
h
001
Accuracy
Resolution
0.5
15
190 x 75 x 38
002
0.5
15
190 x 75 x 38
Size
mm
636
(845)
combines unit 37 310 with cross laser marking (incl. humidity module only 002), optics can be switched for far field and
sharp point measurement, contact temperature sensor can be
connected, optical/acoustic alarm, measured value memory, PC
software incl. USB data transfer cable, aluminium case, battery
and calibration record
Optics can be switched between measurements in far field
(75:1) and in sharp point (1 mm, distance 70 mm)
Particularly bright cross laser marking for displaying the real
measuring dot
(Integrated humidity module 002 only) for measurement of
the air humidity and for determining the dew point difference
Reference accuracy 0.75 C with extra fast measuring technology (scanning 100 ms)
Illuminated display (3-lines) with display of C, %rF, C td,
min/max values, alarm limit values and emissivity
Optical and acoustic alarm if limit value exceeded
Sensor input for TE sensor for determination of emissivity
Unit memory for 90 measurement logs
PC software for archiving and documenting the measured data
(included in the scope of delivery)
Bracket for stand for online measurement via USB cable
(included in the scope of delivery)
In-situ measured data documentation with Testo log printer
(accessories)
37 314
Measuring range
37 314...
Operating
life
h
-35 to +950
001
0.1
25
155 x 58 x 195
-35 to +950
002
0.1
25
155 x 58 x 195
Accuracy
Resolution
Size
mm
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
(319)
made of glass fibre, enables simple visual inspections in hard to
access places, e.g. in air conditioning ducts, ventilation and heating
systems. Diagnoses such as corrosion, attrition, condition of welds,
loose parts and many more can therefore be easily made without
time-consuming or expensive dismantling. This saves time and high
repair costs!
Light source: LED two-point lighting
Probe resistance: Probe tip watertight up to handpiece handle, shortterm resistance to silicone oils, benzine and kerosene. Oils and benzine must be wiped off immediately after immersion!
001:
Endoscope set consisting of testo endoscope 319, gooseneck tube,
magnetic and reflector attachment, case
002:
Endoscope
Further accessories are given under 37 309...
002
001
37 320...
Working temperature
Probe
45 +/- 5
001
-20 to + 80 C
45 +/- 5
002
-20 to + 80 C
Probe
max. bending
radius
mm
Battery type
mm
Probe
length
mm
6.5
1247 +/- 6
50
3 AA mignon
1.5 V
6.5
1247 +/- 6
50
3 AA mignon
1.5 V
Measuring principle
37 400...
Eddy current
magneto-inductive
Magneto-inductive/Eddy current
018
021
026
37 400
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
KARL DEUTSCH
quickly and reliably measures coats of paint, varnish, enamel, plastic, rubber,
ceramic, insulations as well as electroplating on iron, steel or non-magnetic metals
Large digits for easy to read measured values
With the click of a button the large display can be rotated for overhead measurements
Large language selection: German, English, French, Spanish, Italian, Swedish,
Polish, Portuguese, Czech, Rumanian. Other languages on request.
Large comfortable illuminated display
Clear understandable operating instructions via the display, just like a mobile
phone
Easy menu design with 4 keys (membrane keyboard)
100 hours operation, battery state display in 4 levels
Units of measurement can be switched between m, mm, mils, inch
Convenient one-hand operation
The integrated, spring-mounted measuring probe generates a constant setting
pressure
switching on and measuring: calibrated ex factory
Zero and foil/film calibration with formation of mean is possible
Reliable values in less than one second
Weight: 70g / Dimensions: 46 mm x 95 mm x 16 mm
Power supply: 1 x 1.5 V (Type Micro, AAA, LR03)
Measuring uncertainty:
for coats < 100 m: 1% 1.5 m
for coats < 100 m: 1-3% 1 m
Software extension Statistics & Data Storage available on request
Supplied: Device with integrated NFe and/or Fe probe, battery, calibration
foils, calibration blocks, instructions for use, quality test certificate, transport case
017: Type NFe - For non electrically conductive coats on conductive
substrate (aluminium, copper, brass)
020: Type Fe - For non-magnetic coats on ferromagnetic substrate (iron,
steel)
025: Type Fe/NFe - combination probe automatically detects the substrate
637
Leptoscopes
are tried and tested coating thickness measuring devices for nondestructive measurement of coatings on metals based on the
magnetic (magneto-inductive) method (DIN EN ISO 2178) and
the Eddy current method (DIN EN ISO 2360).
Application of the measuring methods:
For all non-magnetic coatings on (ferro-) magnetic substrate
Technical data:
Power supply: 2 x 1.5 V, 2 x 1.2 V rechargeable LR6 Mignon AA
Battery life: 26 h
Measuring range (selectable): 0 - 20 mm / 800 mil probe spec.
Measuring uncertainty:
for coats < 100 m: +/- 1 m
for coats > 100 m: 1 - 3% +/- 1 m
Two-terminal probe and single terminal probe 20 mm:
for coats > 500 m: 1.3% +/- 10 m
for coats > 1000 m: 1.3% +/- 10 m
Dimensions L x B x D: 151 x 83 x 35 mm
638
Measuring principle
probe specific
37 405...
Magneto-inductive/Eddy current
041
.
37 405
KARL DEUTSCH
Echometer
37 410
37 410...
.
073
37 414...
1.2 - 250
004
.
37 414
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complexTOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Portable, therefore suitable for measurements even on hard to access workpieces. The drive unit can be
removed from the display unit for this purpose. Easy to read display with large digits.
Drive unit:
Speed
Cable length
Weight
Induction method
350 m
Diamond tip
2 m
40 mm
0.75 mN
18 g
Display unit:
Profiles:
Parameters:
Roughness standards:
Sampling lengths (L):
Cut-off length:
Number of individual lengths
(samples):
Filters:
Display range:
37 700 020
Z axis: 350 m
X axis: 12.5 mm
Printer:
Go / no-go judgement:
Auto sleep (auto shutting off):
Calibration:
Power supply:
Rechargeable battery:
Data output / input:
Weight:
Optional
lower / upper
Tolerance
Automatically after 30 seconds
Automatic calibration by entering the values and measurement of the
surface texture standard included in the scope of delivery
Via mains adapter or integrated rechargeable batteries
Charging time: 12 hours (sufficient for 500 measurements)
RS-232 C interface for output/input, DIGIMATIC data output
approx. 290 g
...110
...111
Type
37 700...
SJ-201 P
Sj-301
Skid for cylindrical workpieces
Skid for flat workpieces
Feet (pair) for height adjustment
020
030
110
111
112
...112
TOOLSibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Measuring range:
639
640
37 720...
27
001
Comparison range
Ra m
mm
0.05 - 12.5
120 x 90
37 720 001
Type
38 070
38 070
Version for
.
ND 780
078
To equip your machine tool with a complete digital display you will require:
1 counter
one scale per axis
one scale - counter connection cable per axis
Add-on kit suitable for machine
We will be pleased to provide you with an appropriate quotation. Please contact our specialist consultant in the machines department.
Type
38 010...
Version for
.
NV 300 T
NV 300 M
011
012
Lathes
Milling machines
38 010
To equip your machine tool with a complete digital display you will require:
1 counter
one scale per axis
one scale - counter connection cable per axis
Add-on kit suitable for machine
We will be pleased to provide you with an appropriate quotation. Please contact our specialist consultant in the machines department.
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Number of
axis displays
1
2
3
Z 710
Z 720
Z 730
38 040
38 040 030
010
020
030
38 041
Z 715
Z 725
Z 735
1
2
3
can be used for
Grinders
Erosion machines/EDMs
015
025
035
Z 735S
Z 735E
060
070
3
38 041 035
100
102
To equip your machine tool with a complete digital display you will require:
1 counter
one scale per axis
one scale - counter connection cable per axis
Add-on kit suitable for machine
We will be pleased to provide you with an appropriate quotation. Please contact our specialist consultant in the machines department.
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
641
DP-1 VR
Printing method
Print resolution
Printing speed
Paper supply
Printing capacity
Editing capacity
Printable data
Output functions
Input intervals
Power supply
Battery life
38 410 020
38 410...
.
020
Printer paper
120
642
...013
...011
Type
Data output
Number of inputs
38 420...
DMX-1
DMX-2
DMX-3
(D-SUB 9) RS-232 C
(D-SUB 25) RS-232 C
(D-SUB 9) RS-232 C
1
2
3
011
012
013
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
The measurement converter enables three DIGIMATIC measuring devices to be connected to the keyboard interface of an IBM
compatible PC. This provides an interface for applications which
merely enable manual input of measured values (e.g. spreadsheets, text programs). The user then only has to start transfer
of the measured values. In the DMX-3T/FS USB the measured
values are triggered by a foot-operated switch.
The foot operated switch is available as an optional accessory
Prod. No. 38 420 050
38 420 022
Type
Data output
Number of inputs
38 420...
3
-
022
050
.
DMX-3T/FS USB
64 866 Batteries
Model
64 866...
.
SR 44
64 866 207
207
Length
m
38 452...
001
002
011
012
021
022
031
Type
032
041
042
051
052
6 Pins,
without data key
straight,
without data key
same connector
at both ends
IP 66/67 Vernier
callipers with data key
and connection screws
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
643
39 110 001
39 110 002
39 110...
.
Poldi hardness tester
Replacement comparator rod
001
002
SCLEROGRAPH
39 115 001
39 115...
from 1 kg
001
001
Hardness testers
Materials to be tested
644
39 120
analog
001
003
005
007
002
39 120
digital
Long leg type
002
004
Compact type
006
008
005
006
Shore
hardness
Tip
geometry
A
D
Blunt taper
Sharp point
0.79
-
18
18
A
D
Blunt taper
Sharp point
0.79
-
18
18
Location
area
mm
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
39 128 003
39 128...
sintered carbide
003
Superficial Rockwell
29.42
147.1; 294.2; 441.3
1 HR
Analog
105 mm (with spindle cover)
170 mm (without spindle cover)
150 mm from the centre of the indenter
44 kg
003
39 135 003
Hardness testers
Rockwell
98.07
588.4; 980.7; 1471
0.5 HR
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
645
Capacity
76 638
kg
15
50
50
001
002
003
76 638
Readability
g
20
50
100
3
76 640 HTS crane scales, trade approval possible
Adjusting (calibration) program (CAL): Ensures the scales are very
accurate at all times. Test weight available for an additional
charge.
Can be switched over at the touch of a button, e.g. to non-metric
units. See scales model.
Other functions:
- 10 tare memory
- 10 free memory locations (e.g. for weight values or ID numbers)
- Peak load display
- Cumulative memory, adds all individual weighing
Charge indicator for rechargeable battery, visual through LED
Gross/Tare/Net display through LEDs
Data Hold function: The weight display is frozen by pressing a
key twice and held until the C key is pressed.
Infrared remote control supplied as a standard accessory.
Range approx. 15 m.
Battery size AA (2x1.5V) included
Hook with safety lock, rotatable
Metal housing
Standby function: Display automatically switched off after 5 min.
without load change
Powered by rechargeable batteries
Internal supplied as a standard, battery life approx. 150 h,
charging time approx. 15 h.
Trade approval and certified calibration costs available on
request.
Hardness testers
76 640
646
Capacity
76 640
kg
300
1500
3000
6000
10000
001
002
003
004
005
Readability
Min load
Net weight
g
100
500
1000
2000
5000
kg
2
10
20
40
100
kg
14
14
40
44
44
Casing size
BxDxH
mm
200 x 204 x 160
200 x 204 x 160
279 x 254 x 381
279 x 254 x 381
279 x 254 x 381
mm
45
60
90
100
100
mm
30
28
45
67
67
mm
435
443
735
900
900
mm
480
505
815
1040
1040
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
Capacity
76 606
g
400
1000
2000
4000
4000
001
004
007
010
013
Readability
Reproducibility
Linearity
Weighing platform
g
0.1
0.1
0.1
0.1
1.0
g
0.1
0.1
0.1
0.1
1.0
g
0.2
0.2
0.2
0.3
2
g / piece
0.2
0.2
0.2
0.2
2.0
mm
130 x 130
130 x 130
130 x 130
150 x 170
150 x 170
Capacity
76 642
kg
6
15
36
60
60
150
150
150
300
300
001
002
003
004
005
006
007
008
009
010
Readability
g
2
5
10
20
20
50
50
50
100
100
Net weight
Weighing platform
kg
5
5
5
5
16
5
16
30
16
30
mm
315 x 305
315 x 305
315 x 305
315 x 305
525 x 400
315 x 305
325 x 400
650 x 500
525 x 400
650 x 500
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Hardness testers
76 642
647
76 634
Readability
g
0.1
1
5
.
001
002
003
Weighing platform
mm
150
150
150
Battery
2 x 1.5 V. Size AA
2 x 1.5 V. Size AA
2 x 1.5 V. Size AA
76 634
76 612
Increment
76 612
kg
up to 5
up to 10
001
004
g
2
5
up to 20
up to 50
007
010
10
20
76 614
0
0
0
0
0
0
kg
- 15
- 60
- 60
- 150
- 150
- 200
76 614
.
001
004
007
010
013
013
Increment
Model
g
5
20
20
50
50
100
1
2
3
4
5
6
76 614
Hardness testers
648
Model
76 614
3+4
5+6
081
084
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
TOOLS
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
76 620
kg
3
6
30
001
004
007
76 600
Increment
g
0.1
0.2
1.0
For counting
pieces
from g
0.1
0.2
1.0
Platform size
76 620
mm
265 x 205
265 x 205
265 x 205
.
001
Parcel scales
Capacity 50 kg
Graduation 50 g
Separate control panel for improved legibility
Removable support plate made of 1 mm thick stainless steel, robust and protective, easy to clean
Stable construction
Patented technology
Free positioning of the platform on the table or in
two angle positions on the wall
Energy saving battery operation
Housing made of breakproof plastic, closed design
to protect against dust
Automatic off feature, automatic zero reset
Hold function for saving the displayed value
One button operation: On-Off-Tare-Hold
Large support plate: 30 x 30 cm
Size of platform 21.3 x 10.1 x 5.2 cm
CE mark
3 year guarantee
76 604
76 604
.
001
ibemo Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, Aksai, Pramzone, BKKS office complex
Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; E-Mail: info@ibemo-kz.com
TOOLS
Hardness testers
76 604
649