Vous êtes sur la page 1sur 6

Practice Test: Question Set - 10

1. Upto the critical radius of insulation,


(A) Added insulation will increase heat loss
(B) Added insulation will decrease heat loss
(C) Convective heat loss will be less than conductive heat loss
(D) Heat flux will decrease

Correct Answer

2. Unit of thermal diffusivity is


(A) m/hr
(B) m/hr C
(C) kcal/m hr
(D) kcal/m. hr C

Correct Answer

3. The rate of energy transferred by convection to that by conduction is called


(A) Stanton number
(B) Nusselt number
(C) Biot number
(D) Peclet number

Correct Answer

4. Thermal conductivity of wood depends on


(A) Moisture
(B) Density
(C) Temperature
(D) All of the above

Correct Answer
Answer: Option D

5. A designer chooses the values of fluid flow rates and specific heats in such a
manner that the heat capacities of the two fluids are equal. A hot fluid enters the
counter flow heat exchanger at 100C and leaves at 60C. A cold fluid enters the
heat exchanger at 40C. The mean temperature difference between the two fluids
is
(A) 20C
(B) 40C
(C) 60C
(D) 66.7C

Correct Answer

6. The unit of overall coefficient of heat transfer is


(A) W/mK
(B) W/m
(C) W/mK
(D) W/m

Correct Answer

7. LMTD in case of counter flow heat exchanger as compared to parallel flow heat
exchanger is
(A) Higher
(B) Lower
(C) Same
(D) Depends on the area of heat exchanger

Correct Answer

8. The transfer of heat by molecular collision is smallest in


(A) Solids
(B) Liquids
(C) Gases
(D) None of these

Correct Answer

9. In heat exchangers, degree of approach is defined as the difference between


temperatures of
(A) Cold water inlet and outlet
(B) Hot medium inlet and outlet
(C) Hot medium outlet and cold water inlet
(D) Hot medium outlet and cold water outlet

Correct Answer

10. In a shell and tube heat exchanger, baffles are provided on the shell side to
(A) Improve heat transfer
(B) Provide support for tubes
(C) Prevent stagnation of shell side fluid
(D) All of these

Correct Answer

11. An ordinary passenger aircraft requires a cooling system of capacity.


(A) 2 TR
(B) 4 TR
(C) 8 TR
(D) 10 TR

Correct Answer

12. Joule sec is the unit of


(A) Universal gas constant
(B) Kinematic viscosity
(C) Thermal conductivity
(D) Planck's constant

Correct Answer

13. Fourier's law of heat conduction gives the heat flow for

(A) Irregular surfaces


(B) Nonuniform temperature surfaces
(C) One dimensional cases only
(D) Two dimensional cases only

Correct Answer

14. The value of Prandtl number for air is about


(A) 0.1
(B) 0.3
(C) 0.7
(D) 1.7

Correct Answer

15. The product of Reynolds number and Prandtl number is known as


(A) Stanton number
(B) Biot number
(C) Peclet number
(D) Grashoff number

Correct Answer

View All Answers


(1) Answer: Option A (2) Answer: Option A (3) Answer: Option B (4) Answer: Option D (5) Answer: Option
A (6) Answer: Option A (7) Answer: Option A (8) Answer: Option C (9) Answer: Option D (10) Answer:

Option D (11) Answer: Option C (12) Answer: Option D (13) Answer: Option C (14) Answer: Option C (15)
Answer: Option C

Vous aimerez peut-être aussi