0 évaluation0% ont trouvé ce document utile (0 vote)
118 vues2 pages
Maxfire (s / N > 5,000) and UBB tools needed to replace the exhaust clean out cover gasket: Philips screw driver 5 / 32" hex head wrench Scraper Vacuum
Description originale:
Titre original
Replacing the Exhaust Clean Out Cover Gasket MaxFire and UBB
Maxfire (s / N > 5,000) and UBB tools needed to replace the exhaust clean out cover gasket: Philips screw driver 5 / 32" hex head wrench Scraper Vacuum
Droits d'auteur :
Public Domain
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
Maxfire (s / N > 5,000) and UBB tools needed to replace the exhaust clean out cover gasket: Philips screw driver 5 / 32" hex head wrench Scraper Vacuum
Droits d'auteur :
Public Domain
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
Tools needed to replace the exhaust clean out cover gasket:
• Philips screw driver
• 5/32" hex head wrench • Scraper • Vacuum
Replacing the exhaust clean out cover gasket
□ Unplug the stove.
□ Remove the right side screw and panel. □ Remove the ten (10) 5/16” bolts from the exhaust box cover. See Figure 1. □ Carefully remove the cover and the gasket. □ With a brush, gently clean the fan blades. □ Use a vacuum to remove any ash from the box. See Figure 2. □ Replace the gasket and install the cover. □ Replace the ten (10) 5/16” bolts and tighten. □ Replace the right side panel and screw. □ Plug the stove in. □ The stove is ready to use.