Académique Documents
Professionnel Documents
Culture Documents
SERVICE MANUAL
CD MECHANISM BASIC CD MECHANISM : 3ZG-2E3NM
This set employs laser. Therefore, be sure to follow carefully the CAUTION
instructions below when servicing. Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
WARNING! radiation exposure.
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT
WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO ATTENTION
CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE L'utilisation de commandes, réglages ou procédures autres que
FROM A DISTANCE OF MORE THAN 30cm FROM THE ceux spécifiés peut entraîner une dangereuse exposition aux
SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL radiations.
PICK-UP BLOCK.
ADVARSEL!
Caution: Invisible laser radiation when
Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude
open and interlocks defeated avoid expo-
af funktion. Undgå udsættelse for stråling.
sure to beam.
Advarsel:Usynling laserståling ved åbning,
This Compact Disc player is classified as a CLASS 1 LASER
når sikkerhedsafbrydere er ude af funktion.
product.
Undgå udsættelse for stråling.
The CLASS 1 LASER PRODUCT label is located on the rear
exterior.
VAROITUS!
Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainit-
ulla tavalla saattaa altistaa käyt-täjän turvallisuusluokan 1 ylit-
CLASS 1 LASER PRODUCT
tävälle näkymättömälle lasersäteilylle. KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
VARNING!
Om apparaten används på annat sätt än vad som specificeras i
denna bruksanvising, kan användaren utsättas för osynling
laserstrålning, som överskrider gränsen för laserklass 1.
-2-
Precaution to replace Optical block
(KSS-213F)
PICK-UP ASSY PWB
Body or clothes electrostatic potential could ruin
laser diode in the optical block. Be sure ground
body and workbench, and use care the clothes
do not touch the diode.
-3-
How to Adjust the Rotating Phase of the Gear, Main Cam
1) Push down the hooking catch of the CHAS. MECH, and remove
the TRAY.
2) Align the arrow mark of the Gear, Main Cam with the black round
mark of the CHAS, MECHA as shown below.
3) Confirm that the Slide, Mech Cam is located in the right position,
then insert the TRAY gently.
-4-
ELECTRICAL PARTS LIST -1/11 (3CD C.B -1/9)
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-5-
ELECTRICAL PARTS LIST -2/11 (3CD C.B -2/9)
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-6-
ELECTRICAL PARTS LIST -3/11 (3CD C.B -3/9)
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-7-
ELECTRICAL PARTS LIST -4/11 (3CD C.B -4/9)
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-8-
ELECTRICAL PARTS LIST -5/11 (3CD C.B -5/9)
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-9-
ELECTRICAL PARTS LIST -6/11 (3CD C.B -6/9)
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-10-
ELECTRICAL PARTS LIST -7/11 (3CD C.B -7/9)
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-11-
ELECTRICAL PARTS LIST -8/11 (3CD C.B -8/9)
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-12-
ELECTRICAL PARTS LIST -9/11 (3CD C.B -9/9)
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-13-
ELECTRICAL PARTS LIST - 10/11 (T-T C.B/DRIVE C.B -1/1)
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-14-
ELECTRICAL PARTS LIST-11/11
• Regarding connectors, they are not stocked as they are not the initial order items.
The connectors are available after they are supplied from connector manufacturers upon the order is received.
-15-
TRANSISTOR ILLUSTRATION-1/1
C D
B G
ECB ECB E S
CDA1585 KTA1266GR 2SC3052 2SK2158
CSD1489 2SC5342 2SA1162
2SC2712
-16-
BLOCK DIAGRAM-1/1
(TURN M401
TABLE
MOTOR)
OPEN
CLOSE
DLSHF
DISHR
BUFFER
CN601 SW
CD MECHANISM ASSY
3ZG2 E3NM
AGC CONT
LD ON
LD POWER
AOL+
AOR+
3CD C.B
-17-
WIRING-1/3 (3CD C.B -1/2)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
-18-
WIRING-2/3 (3CD C.B -2/2)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
-19-
WIRING-3/3 (T-T, DRIVE)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
(CONDUCTOR SIDE) A
3CD C.B B
CN404
L
(CONDUCTOR SIDE)
M
R
3CD C.B
CN402
-20-
SCHEMATIC DIAGRAM-1/2
6
7 8
11
CONN 5P H
6216-11H
4
CONN 6P H
6216-11
3
1
2
10
-21-
SCHEMATIC DIAGRAM-2/2
-22-
WAVE FORM-1/3
1.5Vp-p 5Vp-p
1Vp-p
OPEN
1 IC401 6 OPEN VOLT/DIV: 2V
TIME/DIV: 500mS
2 IC401 7 CLOS
CLOSE
1 IC401 6 OPEN VOLT/DIV: 2V
TIME/DIV: 500mS
6 IC401 @ OPEN
5Vp-p
5Vp-p
0Vp-p
1Vp-p
CLOSE
1 IC401 6 OPEN VOLT/DIV: 2V
TIME/DIV: 500mS OPEN
2 IC401 7 CLOS 2 IC401 7 CLOS VOLT/DIV: 2V
TIME/DIV: 500mS
7 IC401 # CLOS
5Vp-p
0Vp-p
5Vp-p
1.2Vp-p
-23-
WAVE FORM-2/3
CLOSE OPEN
2 IC401 7 CLOS VOLT/DIV: 2V 0 M301 +- VOLT/DIV: 2V
TIME/DIV: 500mS TIME/DIV: 500mS
7 IC401 # CLOS
5Vp-p 1.8Vp-p
1.2Vp-p
OPEN CLOSE
7.2Vp-p
1.2Vp-p
1.2Vp-p
3.4Vp-p
1.2Vp-p
1.4Vp-p
1.2Vp-p
-24-
WAVE FORM-3/3
4Vp-p 4.5Vp-p
1.4Vp-p
3.6Vp-p
4Vp-p
1.2Vp-p
1.2Vp-p
-25-
IC BLOCK DIAGRAM-1/2
IC, CXA2550
1k
APC LD
AGC AMP Vcc VCC
1 APC PD.AMP 56k 20
VTH
10k
10k 55k
LD 56k
2 VEE 19 LD ON
VEE 10k
IC, BU4066
E IN VDD
1 14
OUT/IN IN/OUT
SWA
E OUT CONTROL
2 13 (E)
B/D IN CONTROL
3 SWD 12
OUT/IN IN/OUT
(A/C)
IN/OUT OUT/IN
CONTROL SWB A/C IN
5 10
(B/D)
CONTROL F OUT
6 9
(F) SWC
IN/OUT OUT/IN
VSS 7 8 F IN
-26-
IC BLOCK DIAGRAM-2/2
IC, BA6392FP IC, BU2092
VSS VDD
CONTROL CIRCUIT
DATA OE
CLK
LCK DISHR
CD-ON DISHF
OPEN CLOSE
CLOS OPEN
DISHF LED
DISHR MOTE
IC, SST39SF
VDD
A16
A11
A17
NC
A0
~ ~
DQ2
CE
VSS
WE
OE
DQ0
DQ3
DQ7
~ ~
-27-
IC DESCRIPTION-1/3 (CXD3068Q)-1/2
-28-
IC DESCRIPTION-1/3 (CXD3068Q)-2/2
-29-
IC DESCRIPTION-2/3 (ES3880)-1/2
-30-
IC DESCRIPTION-2/3 (ES3880)-2/2
-31-
IC DESCRIPTION-3/3 (ES3889)-1/3
-32-
IC DESCRIPTION-3/3 (ES3889)-2/3
-33-
IC DESCRIPTION-3/3 (ES3889)-3/3
-34-
MECHANICAL EXPLODED VIEW-1/1
14
15
16
12
B
19
18
21
20 24
25
22 23
26
11 27
13
A
a
a
9 29
SH,25-40-0.5 PC b
8
3
17 30
7
6
10 31
5
31
4
3
PWB
C C
2 3ZG2
PWB 31
(BZA-4)
1 28
b
-35-
MECANICAL PARTS LIST -1/1
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-36-
COLOR NAME TABLE
Basic color symbol Color Basic color symbol Color Basic color symbol Color
B Black C Cream D Orange
G Green H Gray L Blue
LT Transparent Blue N Gold P Pink
R Red S Silver ST Titan Silver
T Brown V Violet W White
WT Transparent White Y Yellow YT Transparent Yellow
LM Metallic Blue LL Light Blue GT Transparent Green
LD Dark Blue DT Transparent Orange GM Metallic Green
YM Metallic Yellow DM Metallic Orange PT Transparent Pink
LA Aqua Blue GL Light Green HT Transparent Gray
HM Metallic Gray NH Champagne Gold M Wood Pattern
-37-
MECHANISM EXPLODED VIEW 1/1 (3ZG-2 E3NM)
7
8
-38-
CD MECHANISM PARTS LIST-1/1 (3ZG-2)
6 87-A90-836-010 2Y PICKUP,KSS-213F
7 83-ZG2-245-510 1A LEVER,SHUTTER(*)
8 83-ZG2-250-210 OE SPR-E,SHT 2
-39-
OTHER PARTS LIST -1/2 (BZA-4)
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-40-
OTHER PARTS LIST -2/2 (BZG-5)
! = ! SAFTY PARTS
C = Components marked
All components used on this model at the production line are shown in this service manual.
However, please note that not all components will be available as spare parts for after-sales service.
Components marked S and O are designated as spare parts for service and will be stocked at the spare parts centers.
Components marked X and R are not designated as spare parts for after sales service, and will not be stocked at the spare parts centers.
-41-
2–11, IKENOHATA 1–CHOME, TAITO-KU, TOKYO 110-8710, JAPAN TEL:03 (3827) 3111
921338