Académique Documents
Professionnel Documents
Culture Documents
The series of numbers in front of the bearing name can provide much information about that
specific type of bearing. Here is an example:6001ZZ
6 = Type Code
0 = Series
01 = Bore Size
ZZ = Suffix
Suffix Meanings:
Z - Single Shielded
ZZ - Double Shielded
RS - Single Sealed
2RS - Double Sealed
V - Single Non-contact Seal
VV - Double Non-contact Seal
DDU - Double Contact Seals
NR - Snap Ring and Groove
M - Brass Cage
C3 - This marking indicates a radial internal clearance greater than the standard clearance. C3
bearings are usually fitted to equipment where there are large temperature differences between
the inner and outer casings, therefore, sufficient clearance is needed to avoid early bearing
failure.
Customer Comments: