PUMPS FOR INDUSTRY
The Gorman-Rupp Company has been manufacturing pumps for industry since 1933.
You'll find Gorman-Rupp pumps operating in the most hostile industrial environments.
We have an experienced staff of engineers dedicated to the design and construction of
the most efficient and serviceable pumps in the industry. When you need a pump you
can depend on, choose the industry leader, Gorman-Rupp.
Gorman-Rupp T Series pumps are
designed for economical, trouble-free
operation in handling solids-laden
liquids and slurries. Pumps feature a
large volute design which allows them to
reprime automatically in a completely
open system without need of suction or
discharge check valves.
Solids &
Corrosive
Liquids
Solids &
Conasive 4", 2, 9,4",
Liquids Materials of Construction: Cast
iron, bronze, 216 stainless steel,
CDAMCu, Alioy 20, hastelloy
Max. Head: 100 feet
Max. Capacity: 100 GPM
Gorman-Rupp 10 Series pumps are
specifically designed for handling solids
and corrosive liquids and slurries. They
have only two moving parts, the impeller
and shaft, so maintenance is minimal.
High-
Efficiency
Solids &
Corrosive
Liquids
U Series pumps are the most efficient
self-priming pumps available, Multi-vane
open impeller is designed for high
efficiency yet can still handle solids up to
1%” in diameter.
Limited
Solids &
re Materials of Construction: Cast
Corrosive fron, bronze (consutt factory tor
Liquids ‘other special metals available)
wey, Mae Capacity: 2200GPm
The 80 Series is a high-efficiency pump
designed for non stop work loads. The
simple design employs only two moving
parts, so maintenance and service are
minimal.Corrosive
=e 90 Series pumps feature a compact
Liquids & design which makes them ideal
Limited Couey eset jor applications where space is
Solids iusx. Copan 310 GPM critical or where several pumps
ies, Hood 180 fet must operate in close quarters.
Sos:
Clear O Series pumps have a straight-in
Liquids suction design which eliminates
entrance restrictions and provides
better suction performance when
handling solvents and similar liquids,
Submersible J Series semi-axial flow submersible
Pumps pumps are specifically designed for
handling solids. Depending on pump
model, they will handle up to 5!”
diameter solids.
Submersible J Series winglet vane vortex
Pumps pumps are designed for pumping
at high heads with low rates of flow.
They won't clog or jam and will handle
solids up to 3” in diameter
igh Gorman-Rupp widebase submersible
pumps are designed for high volume.
Volume, high head applications.
High Head Gorman-Flupp also offers compact simine:
moreibie and mine permissitie pumps which are
approved by the Mine Safety anc Heat
Adininistation (MSHA) for operation iat
Uniod States
High 0 Seres G0 Seres VGSeres Gorman-Rupp manufactures over
Volume, ‘Size: 3-8 Sie tee 300 models of high volume, high
High aaraie t pressure standard centrifugal pumps
Pressure imc capecty_ Tare eecvormaeecra 0" general purpose industrial
ienl license mdkestiammes 20plications,
Songs: ae
CEFR | corman-tupe company
GORMANAUPP | P.O. Box 1217» Mansfield, Ohio 44901-1217
PUMPS
Ph, 419/755-1011 « Fax 419/755-1251