Académique Documents
Professionnel Documents
Culture Documents
6 CORPORATE PARKWAY
GOOSE CREEK,SC.29445
STYLE NUMBER: DE8958KFL
www.quoizel.com
Please call our toll-free Consumer Hotline if you have any questions I
about this product: 1-800-645-3184
M
CAUTIONS :
● These instructions are provided for your safety. It is very important that they are read completely
before the installation of your fixture. We are strongly recommend that a professional electrician install
the fixture.
● Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install
or operate the product. Contact customer service for replacement part.
1 OF 3
ASSEMBLY INSTRUCTIONS STYLE NUMBER: DE8958KFL
Mounting Hole
Cage
Glass Holder
STEP 2 :
Install the Bulb into the Socket Base by aligning the
pins on the Bulb with the keyholes in the Socket Base.
Once they are aligned, gently push the Bulb into the
keyholes and twist the Bulb to lock it in place.
Socket Base
Bulb
STEP 3 :
a . Place Cage onto a flat work surface . Place Fixture
Body onto top of the Cage and match the holes on the Fixture Body
Fixture Hood with Bolts on the top edge of the Cage .
b . Thread Lock Balls onto Bolts and hand tighten until
snug to secure Fixture Body and Cage . Lock Ball
Fixture Hood
Bolt
Cage
STEP 4 :
* Use Wire Connectors ( not supplied ) to connect the WHITE WIRE WHITE OR RIBBED
wires .
FROM HOUSE FROM FIXTURE
a . C onnect the House Ground Wire to the Fixture Ground
Wire .
b . C onnect the House White Wire to the Fixture Supply Wire
BLACK(OR RED)WIRE BLACK SIDE
(White or Ribbed Side) .
c . C onnect the House Black (or Red) Wire to the Fixture FROM HOUSE FROM FIXTURE
Supply Wire (Black Side).
d . Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet GROUND WIRE GROUND WIRE
Box. FROM HOUSE FROM FIXTURE
2 OF 3
ASSEMBLY INSTRUCTIONS STYLE NUMBER: DE8958KFL
STEP 5 :
a . Screw the Mounting Screws into the Crossbar, place
Lock Washer over end of Mounting Screw and thread Outlet Box
the Hex Nuts onto the Mounting Screws as shown.
Secure the position of the Mounting Screws by
tightening the Hex Nuts against the Crossbar. Mounting
b. Secure the Crossbar to the Outlet Box with Outlet Box Screw
Crossbar
Screws.
Lock Washer
Hex Nut
Outlet Box
Screw
STEP 6 :
Place Backplate onto Outlet Box aligning 2 holes in the
Backplate with 2 Mounting screws threaded on the Crossbar Mounting
Crossbar and secure it against wall with Mounting Screw
Backplate
Mounting Ball
3 OF 3