Académique Documents
Professionnel Documents
Culture Documents
1.4301
AISI/SAE 304
UNS S 30400
alloy —
Standards EN 10088-3
DESCRIPTION
The stainless austenitic chromium-nickel steel 1.4301 shows good c orrosion resistanc e (partic ularly in
natural environmental media and in the absenc e of considerable c hlorine and salt concentrations and sea
water) and weldability. Application with ac ids have to be chec ked individually. However, after welding
1.4301 is not stable to intergranular c orrosion. Good polishing and deep drawing property. It is used in
the c rude oil industry, chemical industry, petroc hemic al industry, automobile industry.
Our produc t range in 1.4301 are tubes and pipes, fittings and flanges, acc essories
C HEMICA L COMPOSITION ¹
C Si Mn P S Cr Mo Ni V
≤% ≤% ≤% ≤% ≤% % % % %
Nb Ti Al Co Cu N Fe Ce Y
% ≤% ≤% ≤% % ≤%
0,11
WELDING FILLER
crude oil industry, chemical industry, petrochemical industry, construction industry, food industry
(all aforementioned specifications serve as a general orientation and have to be reviewed depending on the specific
conditions of use)
© 2005 M. Woite GmbH | Postbox 11 45 | D-40671 Erkrath | Tel. +49 (211) 24 40 91 | Fax +49 (211) 24 92 28
www.m-woite.de | woite@woite-edelstahl.de
m-woite.de/en/materials/14301.shtml 1/1