0 évaluation0% ont trouvé ce document utile (0 vote)
28 vues1 page
This document provides information about the characteristics of the copper-zinc alloy grade L59 (Л59), including:
1. The chemical composition, mechanical properties, physical properties, and technological properties of the material.
2. It specifies that the grade has a zinc basis between 39.1-43% and includes information about hardness values when cast versus hardened.
3. The final sentences provide details on the material's friction coefficients with and without oil, and recommended forging and casting temperature ranges.
This document provides information about the characteristics of the copper-zinc alloy grade L59 (Л59), including:
1. The chemical composition, mechanical properties, physical properties, and technological properties of the material.
2. It specifies that the grade has a zinc basis between 39.1-43% and includes information about hardness values when cast versus hardened.
3. The final sentences provide details on the material's friction coefficients with and without oil, and recommended forging and casting temperature ranges.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme DOCX, PDF, TXT ou lisez en ligne sur Scribd
This document provides information about the characteristics of the copper-zinc alloy grade L59 (Л59), including:
1. The chemical composition, mechanical properties, physical properties, and technological properties of the material.
2. It specifies that the grade has a zinc basis between 39.1-43% and includes information about hardness values when cast versus hardened.
3. The final sentences provide details on the material's friction coefficients with and without oil, and recommended forging and casting temperature ranges.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme DOCX, PDF, TXT ou lisez en ligne sur Scribd
Che mic a l compos i ti on in % for gra de L5 9 ( Л5 9 )
Fe P Cu As Pb Zn Sb Bi Sn Impurity 39.48 - 43 max 0.01 57 - 60 max 0.01 max 0.5 39.1 - 43 max 0.01 max 0.003 max 0.2 all 0.9 Comment: Zn is a basis; the percentage of Zn is given approximately.
Mec ha nic a l prope rti es unde r Т=20 o С for gra de L5 9 ( Л5 9 )