Académique Documents
Professionnel Documents
Culture Documents
Rajkot-Gondal Highway, P.O.T.B. Hospital, Opp: Magotteaux Ind. Pvt. Ltd., Rajkot-2
Phone : 0281- 6531456, Fax : 0281- 2466516,
E Mail: acmerjt@yahoo.com, acmerjt@rediffmail.co:n
Date
:- 13/06/2011
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
/ 4 a s h g ,'
Rdkg
,'
Component Details
Customer Name
Component
HEAT NO.
R kc-
OD 604 X 40 mm Thk
18/01/2012
Calibration Agency
Testing Parameters
0 - 100 M M &
0 - 1000 MM
Sensitivity
Amplitude 100%
back wall echo + Calibration Gain
16 dB & 28 dB
~
ASME SEC.VIII
26+6dB &
CL. 3.3.4
Probe Designation
Normal Probe
Surface Condition
~~
Findings Of Test :
2) Job has been scanned from all feasible surface OD and Face.
3) Material is found accepted in U.T. as per the specification CL. 3.3.4 DIV - 2 of ASME SECTION -
ULTRASONIC EXAMINATION
T.C. No. :- E01/1106/3532
Date
:- 13/06/2011
..............................................................................................................................................
..............................................................................................................................................
Manufacturing Process : Forging
!B e d k g !IAkkhg
Component Details
ROLL WELL FORGE
Customer Name
Component
HEAT NO.
OD 673 X 41 mm fhk
R h ~++Q
: Component Sr. No.
MICRO SCAN
Testing Parameters
Amplitude 100%
0 - 100 MM &
16 dB & 28 dB
0 - 1000 M M
-
Procedure Ref.
.~
ASME SA - 388
Acceptance
DIV - 2
Probe Designation
NM-ZLS, 0 24 M M
As Machined
p
p
Vehicle / Couplant
Lubricant Oil
Findings Of Test :
checked. Material identified with marker pen Sr. No. 01.
2) Job has been scanned from all feasible surface OD and Face.
3) Material is found accepted in U.T. as per the specification CL. 3.3.4 DIV - 2 of ASME SEC-HON -
- - .-
NDT Qualificatio
Date
:- 13/06/2011
..............................................................................................................................................
Manufacturing Process : Forging
Component Details
Customer Name
Machine Make
Component
HEAT NO.
MICRO SCAN
0 - 100 MM &
OD 756 X 44 mm Thk
Amplitude 100%
16 dB& 28dB
CL. 3.3.4
Probe Designation
-
--. ..---
Findings Of Test :
2) Job has been scanned from all feasible surface OD and Face.
3) Material is found accepted in U.T. as per the specification CL. 3.3.4 DIV - 2 of ASME SECTION -
ULTRASONIC EXARlllNATlON
T.C. No. :- E01/1106/3530
:- 13/06/2011
Date
--------------------------------------------------------------------------------------------------------------..............................................................................................................................................
/ 4astAg !,
Rekg
/ Bedkg
,'W e k h g
Component Details
Customer Name
HEAT NO.
Machine Make
Component
pbS; +go
OD 604 X 73 mm Thk
MICRO SCAN
Probe Designation
Normal Probe
Surface Condition
Vehicle / Couplant
Findings Of Test :
checked. Material identified with marker pen Sr. No. 0 1 & 02.
2) Job has been scanned from all feasible surface OD and Face.
3) Material is found accepted in U.T. as per the specification CL. 3.3.4 DIV - 2 of ASME SECTION -
,
/
'
,,/'
Rajkot-Gondal Highway, P.O.T.B. Hospital, Opp: Magotteaux Ind. Pvt. Ltd., Rajkot-2
Phone : 0281- 6531456, Fax : 0281- 2466516,
E Mail: acmerjt@yahoo.com, acmerjt@rediffmail.com
*
11
Date
:- 13/06/2011
QR-8.05
-------------------------------------------------------------------------------------------------------------..............................................................................................................................................
,''sarliag
,'Weldkg
Component Details
ROLL WELL FORGE
LTD.
Customer Name
Component
Name
TUB SHEET
HEAT NO.
E L --~480
Material
F - 304
Mach~neMake
component ~ rNO.
.
MICRO SCAN
Model
.-
Calibration
Valid
8
GUntill2
~esting
parameters
Range Setting
0 - 100 M M &
0 - 1000 M M
+---
sensitivity
Setting
Amplitude 100%
Probe Designation
As Machined
Vehicle / Couplant
SAE -30
I( Findings Of Test :
Remarks :-
I
1) No unique identification found on components However, 0 1 N O S above
. ~ ~ size Tub sheet is
checked. Material identified with marker pen Sr. No. 01.
2) Job has been scanned from all feasible surface OD and Face.
3) Material is found accepted in U.T. as per the specification CL. 3.3.4 DIV - 2 of ASME SECTION VIII.
8
ULTRASONIC EXAMINATION
T.C.
No. :- E01/1106/3528
Date
:- 13/06/2011
---------------------------------------------------------------------------------------------------------------
,'
Component Details
Customer Name
HEAT NO.
Machine Make
Component
Fb5 --@o
OD 756 X 66 mm Thk
MICRO SCAN
Calibration Agency
Testing Parameters
Amplitude 100%
back wall echo + Calibration Gain
16 dB & 28 dB
26+6dB &
..-
Probe Designation
2) Job has been scanned from all feasible surface OD and Face.
3) Material is found accepted in U.T. as per the specification CL. 3.3.4 DIV - 2 of ASME SECTION b