Académique Documents
Professionnel Documents
Culture Documents
Antennas
Y O U R PA R T N E R I N C O N C E P T S A N D C O M P E T I T I V E T E C H N O L O G I E S
4168.11.33.00
824-896 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
824-896 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 660x256x50mm (22x10x2) 7.6 kg (16.6 lbs) 213 N (47.8 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 770x308x121mm (26x1x5) 8.3 kg (18.2 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08048 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
824-896 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x256x50mm (4'4"x10"x2 ) 7 kg (15.4 lbs) 376 N (95.6 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4'8"x1'x5 ) 8.5 kg (18.7 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08049 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
824-896 MHz
Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x256x50mm (4'4"x10"x2 ) 7 kg (15.4 lbs) 376 N (95.6 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4'8"x1'x5 ) 8.5 kg (18.7 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08050 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
824-896 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth Vertical beam squint First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x256x50mm (4'4"x10"x2 ) 11kg (24 lbs) 625 N (140 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4'8"x1'x5 ) 13kg (29 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08051 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
824-896 MHz
Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) First null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x256x50mm (4'4"x10"x2" ) 14kg (31 lbs) 373 N (84 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (4'8"x1'x5" ) 17kg (34.5 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08052 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
824-896 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) First null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 2580x256x50mm ( 8' 6"x10"x2") 14kg (31 lbs) 728 N (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (8'10"x1'x5") 17kg (34.5 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08128 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
824-896 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x160x55mm (4'4"x6"x2") 6kg (13lbs) 233 N (52 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x216x156mm (4'8"x8"x6") 7,5kg (16.5lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08129 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
824-896 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) First null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1940x160x55mm (6'4"x6"x2") 9kg (20lbs) 342 N (77 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x216x156mm (69"x8"x6") 12kg (26.5lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08131 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
824-896 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) First null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 2580x160x55mm (86"x6"x2") 11kg (24lbs) 455 N (102 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x216x156mm (810"x8"x6") 14kg (31lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08130 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, indepth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
Key Benefits Dual Polarization Market Leading Performance Light and slim design Robust and reliable Guaranteed passive intermodulation performance
824-896 MHz
Frequency Band (MHz) Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal 3 dB beamwidth Tracking, Horizontal plane (dB) Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
824 896 15 / 12.9 Linear slanted 45 50 < 1.4:1 > 30 65 < 0.5 0 13 > 14 < 0.3 >22 >18 500 <-150
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x256x50mm (52 x 10.4 x2 ) 7.5 kg (16.5 lbs) 419 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (56 x 12 x 5 ) 8.5 kg (19 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08126 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, indepth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
Key Benefits Dual Polarization Market Leading Performance Light and slim design Robust and reliable Guaranteed passive intermodulation performance
824-896 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x256x50mm (52 x 10.4 x2 ) 7.5 kg (16.5 lbs) 419 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (56 x 12 x 5 ) 8.5 kg (19 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08127 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave X-Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
824-896 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1939x256x50mm (6'4"x10"x2") 9kg (20lbs) 547 N (123 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (6'9"x1'x5') 10kg (22lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08132 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave X-Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
824-896 MHz
Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal 3 dB beamwidth Horizontal tracking (dB) Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) Cross-polar discrimination (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1939x256x50mm (6'4"x10"x2") 9kg (20lbs) 547 N (123 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (6'9"x1'x5') 10kg (22lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08223 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-896 MHz
The Powerwave X-Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
824-896 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 659x256x50mm (2'2"x10"x2") 4kg (9lbs) 5186 N (42 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 750x308x121mm (2'6"x1'x5') 5kg (11lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08142 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The new Powerwave log periodic antennas have a narrower profile than our previous models. We replaced the previous 110 degree log periodic elements with a 90 degree log periodic element. The Powerwave log periodic is manufactured in a highly repeatable process that is so precise that absolutely no tuning is required. For long life and problem free performance, we use a robust mechanical design that includes high-strength plates of aircraft quality aluminum used to form an extremely rugged package. In addition, the mechanical strength is independent of the random, which acts only to physically protect and form a weather shield for the elements.
Key Benefits: Cutting Edge Network Performance Reduced Logistic Costs High Volume Capability
806-960 MHz
Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight without Bracket Weight including Bracket Wind Load, Frontal, 42 m/s Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Back 1320x590x350mm (44x111x12 ) 11 kg (23.2 lbs) 14.6 kg (31 lbs) 859 N ( 193 lbf) 70m/s (156 mph) DC grounded PVC Light Gray 1389x627x394mm (47x21x14 ) 17.3 kg (38 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08026 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 660x256x50mm (44x10x2) 5kg (11 lbs) 190 m/s (43 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 770x308x121mm (26x1x5) 6kg (13 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08055 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x256x50mm (44x10x2) 7kg (15 lbs) 373 m/s (84 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (48x1x5) 8.5kg (18 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08055 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x256x50mm (44x10x2) 7kg (15 lbs) 373 m/s (84 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (48x1x5) 8.5kg (18 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08056 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1940x256x50mm (64x10x2) 11kg (24 lbs) 548 m/s (123 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (69x1x5) 13kg (29 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08057 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1940x256x50mm (64x10x2) 11kg (24 lbs) 548 m/s (123 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (69x1x5) 13kg (29 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08057 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1940x256x50mm (64x10x2) 11kg (24 lbs) 548 m/s (123 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (69x1x5) 13kg (29 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08057 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
N female Bottom 2580x256x50mm (86x10x2) 14kg (31lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (810x1x5) 17kg (379 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08124 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits: Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 2580x256x50mm (86x10x2) 14kg (31lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (810x1x5) 17kg (379 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08058 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits: Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 2580x256x50mm (86x10x2) 14kg (31lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (810x1x5) 17kg (379 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08059 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits: Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Front-to-back ratio, co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 2580x256x50mm (86x10x2) 14kg (31lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (810x1x5) 17kg (379 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08060 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 695x160x55mm (23x6x2) 5,5kg (12 lbs) 123 m/s (28 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 805x216x156mm (28x9x6) 6,5kg (14.3 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08061 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x160x55mm (44x6x2) 7,5kg (16.5 lbs) 233 m/s (52 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x216x156mm (48x9x6) 9kg (20 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08062 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x160x55mm (44x6x2) 7,5kg (16.5 lbs) 233 m/s (52 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x216x156mm (48x9x6) 9kg (20 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08063 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1940x160x55mm (64x6x2) 10kg (22 lbs) 342 m/s (77 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x216x156mm (69x9x6) 12kg (26.5 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08064 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) First Null below horizon (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 1940x160x55mm (64x6x2) 10kg (22 lbs) 342 m/s (77 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x216x156mm (69x9x6) 12kg (26.5 lbs)
D031-08065 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits: Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Gain (dBi / dBd) Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 2580x160x55mm (86x6x2) 12kg (26.5 lbs) 455 m/s (102 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x216x156mm (810x9x6) 15kg (33 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08066 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 2580x160x55mm (86x6x2) 12kg (26.5 lbs) 455 m/s (102 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x216x156mm (810x9x6) 15kg (33 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08067 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960 MHz
The Powerwave Urban Single Band Antenna blends inconspicuously into structural backgrounds due to its slim design. This makes it an ideal choice for built-up areas, whether domestic or commercial. State-of-the-art patch technology allows the antennas characteristic flat design. Made from corrosionresistant aluminum and PVC, its exceptionally rugged design reassures you that every Urban antenna we produce provides reliable, lasting service even in the most demanding environments.
Key Benefits Market Leading Performance Vertical Polarization Light Weight Reliable Lasting Service
870-960 MHz
Polarization Nominal Impedance (Ohm) VSWR Horizontal 3 dB beamwidth Electrical downtilt Vertical 3 dB beamwidth First upper sidelobe suppression (dB) Vertical beam squint Front-to-back ratio, co-polar (dB) Maximum input power (W) IM3, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 2580x160x55mm (86x6x2) 12kg (26.5 lbs) 455 m/s (102 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x216x156mm (810x9x6) 15kg (33 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-8068 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Broadband Antenna
65 1.4 m x-polarized MET Antenna
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.
Broadband Antenna
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs, 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking,Horizontal plane, 60 (dB) Electrical downtilt range (adjustable) Vertical -3 dB beamwidth Sidelobe suppression, Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (XPD) 60 (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) < -25 >25 >24 >10 <-150 400 800 300 600
QUALITY AND RELIABILITY
806-896 14.2 Dual linear 45 50 1.5:1 30 704 <2.0 2 to 12 14.91 > 19,18,17 @2,7,12 MET 1
880-960 14.7
806-960 MHz
674
TECHNOLOGY LEADERSHIP
13.80.8 > 19,18,17 @2,7,12 MET < -25 >27 >25 >10
NETWORK OPTIMIZATION
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 42 m/s Cd=1 Weight With Brackets Weight Without Brackets Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 1408x280x125mm (49"x11x5) 435 N (98 lbf) 15.8 kg (35 lbs) 12.18 kg (27 lbs) 70 m/s (156mph) DC grounded GRP Light Gray 1550x355x255mm (61"x12"x10") 19.9 kg (44lbs)
D031-08184 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Broadband Antenna
65 2.0 m x-polarized MET Antenna
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
Broadband Antenna
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi) Polarization 806-896 16.0 Dual linear 45 50 1.4:1 30 655 <2.0 0 to 7.5 9.50.6 > 20,17,15 @0,4,7 MET 0.5 < -18 >30 >25 >11 <-150 400 800 300 600
QUALITY AND RELIABILITY
880-960 16.5
806-960 MHz
Nominal Impedance (Ohm) VSWR , 806-960MHz Isolation between inputs, 806-960MHz (dB) Horizontal -3 dB beamwidth Tracking,Horizontal plane, 60 (dB) Electrical downtilt range (adjustable) Vertical -3 dB beamwidth Sidelobe suppression, Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (XPD) 60 (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W)
655
TECHNOLOGY LEADERSHIP
90.5 > 20,17,15 @0,4,7 MET < -18 >30 >25 >11
NETWORK OPTIMIZATION
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 42 m/s Cd=1 Weight With Brackets Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size 7/16 DIN female Bottom 2033x280x125mm (68"x11x5) 828 N (141 lbf) 18 kg (39,7 lbs) 70m/s (156mph) DC grounded GRP Light Gray 2175x355x255mm (72"x12"x10")
D031-08185 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Broadband Antenna
65 2.6 m x-polarized MET Antenna
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
Broadband Antenna
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR , 806-960MHz Isolation between inputs, 806-960MHz (dB) Horizontal -3 dB beamwidth Tracking,Horizontal plane, 60 (dB) Electrical downtilt range (adjustable) Vertical -3 dB beamwidth Sidelobe suppression, Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (XPD) 60 (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 400 800 7.30.4 > 20,17,15 @0,2,5 MET 0.3 < -18 >30 >25 >11 <-150 300 600
QUALITY AND RELIABILITY
880-960 18.0
806-960 MHz
655
TECHNOLOGY LEADERSHIP
7.00.4 > 20,17,15 @0,2,5 MET < -18 >30 >25 >11
NETWORK OPTIMIZATION
All specifications are subject to change without notice. Contact factory for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 150 m/s Cd=1 (N) Weight With Brackets Survival Wind Speed (m/s) Lightning Protection Radome Material Radome Color Packing Size 7/16 DIN female Bottom 2580x280x125mm (86"x11x5) 868 (195 lbf) 21 kg (46.3 lbs) 70 (156mph) DC grounded GRP Light Gray
2725x355x255mm (811"x12"x10")
D031-08186 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com
2 x 7/16 DIN female Bottom 1300x280x125mm (4'3"x11"x5") 14 kg (31 lbs) 401 N (90 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 1490x355x200mm (4'11"x1'2"x8") 15 kg (33 lbs)
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08163 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com
2 x 7/16 DIN female Bottom 1300x280x125mm (4'3"x11"x5") 14 kg (31 lbs) 401N (90 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 1490x355x200mm (4'11"x1'2"x8") 15 kg (33 lbs)
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08164 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com
2 x 7/16 DIN female Bottom 1300x280x125mm (4'3"x11"x5") 14 kg (31 lbs) 401N (90 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 1490x355x200mm (4'11"x1'2"x8") 15 kg (33 lbs)
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08165 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 2 x 7/16 DIN female Bottom 2033x280x125mm (68"x11x5) 18 kg (39,7 lbs) 628 N (141 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 2175x355x255mm (72"x12"x10")
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08166 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 2 x 7/16 DIN female Bottom 2033x280x125mm (68"x11x5) 18 kg (39,7 lbs) 628N (141 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 2175x355x255mm (72"x12"x10")
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08167 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 2 x 7/16 DIN female Bottom 2033x280x125mm (68"x11x5) 18 kg (39,7 lbs) 628N (141 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 2175x355x255mm (72"x12"x10")
D031-08168 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 2 x 7/16 DIN female Bottom 2580x280x125mm (86"x11x5) 21 kg (46.3 lbs) 796N (179 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 2725x355x255mm (811"x12"x10")
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08169 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 2 x 7/16 DIN female Bottom 2580x280x125mm (86"x11x5) 21 kg (46.3 lbs) 796N (179 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 2725x355x255mm (811"x12"x10")
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08170 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
Electrical downtilt Vertical -3 dB beamwidth Sidelobe suppression, Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (XPD) 60 (dB) IM3, @2x43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W)
All specifications are subject to change without notice. Contact factory for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 2 x 7/16 DIN female Bottom 2580x280x125mm (86"x11x5) 21 kg (46.3 lbs) 796N (179 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 2725x355x255mm (811"x12"x10")
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08171 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Broadband Antenna
90 1.3 m x-polarized MET Antenna
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt from 0 to the first null at horizon (16) for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
Broadband Antenna
Electrical Specifications
Frequency Range (MHz) 806 - 960 Dual linear 45 13.5 50 < 1.4:1 > 30 90 15 2 to 12 >27 >18 600 -150 Typical Horizontal and Vertical 7481.00 Patterns
806-960 MHz
Polarization Gain (dBi) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, 2Tx@43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s mph Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
2 x 7/16 DIN female Bottom 1300x280x125mm (4'3"x11"x5") 14 kg (31 lbs) 476 N (107 lbf) 70m/s (156 mph) DC grounded GRP Light Gray Pre-mounted standard brackets 1490x355x200mm (4'11"x1'2"x8") 15 kg (33 lbs)
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08183 Rev A
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Broadband Antenna
90 2.0 m x-polarized MET Antenna
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt from 0 to the first null at horizon (10) for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
Broadband Antenna
Electrical Specifications (Preliminary)
806-960 MHz
Frequency Range (MHz) Polarization Gain (dBi) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, 2Tx@43dBm (dBi)
806 - 960 Dual linear 45 15 50 < 1.4:1 > 30 90 10 0 to 7.5 >27 >18 600 -150 Typical Horizontal and Vertical 7482.00 Patterns
All specifications are subject to change without notice. Contact factory for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight With Brackets Wind Load, Frontal, 100 mph (44.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
2 x 7/16 DIN female Bottom 2000x280x125mm (67"x11"x5") 15 kg (33 lbs) 476 N (107 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2225mmx355mmx255mm (74"x14"x10") 16 kg (35 lbs)
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08187 Rev A
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning. Choose the optional MET function that allows you to field-adjust the electrical tilt from 0 to the first null at horizon (7) for optimum roll-off effect.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
806-960 MHz
Polarization Gain (dBi) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, 2Tx@43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight With Brackets Wind Load, Frontal, 100 Mph(44,7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
2 x 7/16 DIN female Bottom 2630x280x125mm (88"x11"x5") 20.6 kg (45.3 lbs) 476 N (107 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2830x355x255mm (94"x12"x10") 21.6 kg (47.5 lbs)
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08188 Rev A
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
2 x 7/16 DIN female Bottom 1330x280x125mm (88"x11"x5") 14 kg 411 N (92 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 1530x355x255mm (94"x12"x10") 15 kg
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08172 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
2 x 7/16 DIN female Bottom 1330x280x125mm (88"x11"x5") 14 kg 411 N (92 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 1530x355x255mm (94"x12"x10") 15 kg
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08173 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
2 x 7/16 DIN female Bottom 1330x280x125mm (88"x11"x5") 14 kg 411 N (92 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 1530x355x255mm (94"x12"x10") 15 kg
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08174 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
2 x 7/16 DIN female Bottom 2080x280x125mm (88"x11"x5") 16 kg 642 N (144 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2280x355x255mm (94"x12"x10") 17 kg
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08175 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
2 x 7/16 DIN female Bottom 2080x280x125mm (88"x11"x5") 16 kg 642 N (144 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2280x355x255mm (94"x12"x10") 17 kg
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08176 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
2 x 7/16 DIN female Bottom 2080x280x125mm (88"x11"x5") 16 kg 642 N (144 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2280x355x255mm (94"x12"x10") 17 kg
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08177 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
2 x 7/16 DIN female Bottom 2600x280x125mm (88"x11"x5") 19 kg 636 N (143 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2800x355x255mm (94"x12"x10") 20 kg
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08178 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
2 x 7/16 DIN female Bottom 2600x280x125mm (88"x11"x5") 19 kg 636 N (143 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2800x355x255mm (94"x12"x10") 20 kg
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08179 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
806-960 MHz
The Powerwave broadband dual polarized antenna is designed with a slant 45 configuration having equal signal strengths on both polarizations. The design ensures the highest possible diversity gain, isolation and cross polarization discrimination. Its slim design and sophisticated electrical performance, typical of Powerwave antennas, ensures maximum efficiency as well as stable pattern over the entire frequency range. This design relies on leading-edge patch technology fed via a micro strip PCB network. Special attention has been paid to ensure antenna pattern peak performance, making this an excellent choice for optimal cell planning.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
806-960 MHz
Polarization Gain (dBi) / (dBd) Nominal Impedence (Ohm) VSWR (824-960 MHz) Isolation Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) Maximum input power (W) IM, 3rd order, @2x43dBm (dBc)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
2 x 7/16 DIN female Bottom 2600x280x125mm (88"x11"x5") 19 kg 636 N (143 lbf) 70m/s (156 mph) DC grounded GRP Light Gray 2800x355x255mm (94"x12"x10") 20 kg
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08180 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
880-960 MHz
The Powerwave X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, indepth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
Key Benefits High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
880-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 660x256x50mm (2'2"x10"x2") 4 kg (8.8 lbs) 190N (57 lbf) 55m/s (123 mph) DC grounded PVC Light gray 770x308x121mm (2'6"x1"x5") 5.5kg (12 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08069 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
880-960 MHz
The Powerwave X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, indepth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
Key Benefits Dual Polarization Market Leading Performance Light and slim design Robust and reliable Guaranteed passive intermodulation performance
880-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x256x50mm (44x10x2) 8.5kg (18.7 lbs) 1320 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (48x1x5) 10kg (22 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08070 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
880-960 MHz
The Powerwave X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, indepth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
Key Benefits Dual Polarization Market Leading Performance Light and slim design Robust and reliable Guaranteed passive intermodulation performance
880-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x256x50mm (44x10x2) 8.5kg (18.7 lbs) 1320 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (48x1x5) 10kg (22 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08071 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
880-960 MHz
The Powerwave X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, indepth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
Key Benefits Dual Polarization Market Leading Performance Light and slim design Robust and reliable Guaranteed passive intermodulation performance
880-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1320x256x50mm (44x10x2) 8.5kg (18.7 lbs) 1320 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 1430x308x121mm (48x1x5) 10kg (22 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08072 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
880-960 MHz
The Powerwave X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, indepth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
Key Benefits Dual Polarization Market Leading Performance Light and slim design Robust and reliable Guaranteed passive intermodulation performance
880-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 2580x256x50mm (86x10x2) 14kg (31 lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (810x1x5) 18kg (39.7 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08077 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
880-960 MHz
The Powerwave X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, indepth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
Key Benefits Dual Polarization Market Leading Performance Light and slim design Robust and reliable Guaranteed passive intermodulation performance
880-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 2580x256x50mm (86x10x2) 14kg (31 lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (810x1x5) 18kg (39.7 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08078 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
880-960 MHz
The Powerwave X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, indepth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
Key Benefits Dual Polarization Market Leading Performance Light and slim design Robust and reliable Guaranteed passive intermodulation performance
880-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 2580x256x50mm (86x10x2) 14kg (31 lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (810x1x5) 18kg (39.7 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08079 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
880-960 MHz
The Powerwave X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, indepth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
Key Benefits Dual Polarization Market Leading Performance Light and slim design Robust and reliable Guaranteed passive intermodulation performance
880-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 2580x256x50mm (86x10x2) 14kg (31 lbs) 728 m/s (164 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2690x308x121mm (810x1x5) 18kg (39.7 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08080 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
880-960 MHz
The Powerwave X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, indepth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
Key Benefits Dual Polarization Market Leading Performance Light and slim design Robust and reliable Guaranteed passive intermodulation performance
880-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1940x256x50mm (64x10x2) 9kg (20 lbs) 550 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (69x1x5) 12kg (26.5 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08081 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
880-960 MHz
The Powerwave X-Urban Single Band Antenna shares its characteristically slim design with the Urban antenna. Its outstanding performance in the field derives from excellent VSWR (Voltage Standing Wave Ratio), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at +45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, indepth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.
Key Benefits Dual Polarization Market Leading Performance Light and slim design Robust and reliable Guaranteed passive intermodulation performance
880-960 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Bracket Wind Load, Frontal, 42 m/s, Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female Bottom 1940x256x50mm (64x10x2) 9kg (20 lbs) 550 N (256 lbf) 55 m/s (123 mph) DC grounded PVC Light gray 2050x308x121mm (69x1x5) 12kg (26.5 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08082 Rev A
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
1710-2170 MHz
Nominal Impedance (Ohms) VSWR Isolation betw een inputs, 824-960MHz (dB) Horizontal -3 dB beamw idth Tracking,Horizontal plane, 60 (dB) Electrical dow ntilt Vertical - 3dB Beam w idth Sidelobe suppression, Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total pow er (dB) Cross-polar discrimination (XPD) 0 (dB) Cross-polar discrimination 60 (dB) IM3, 2Tx@43dBm (dBc) IM7, 2Tx@43dBm (dBc) Pow er Handling, Average per input (W) Pow er Handling, Average total (W)
All specifications are subject to change without notice. Contact factory for complete performance data.
643
12.81.1
NETWORK OPTIMIZATION
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 100 mph(44,7m/s) Cd=1 Survival Wind Speed (mph) Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female 709x167x89.5mm (24x7x4 ) 7.3 kg (16 lbs) 35 lbf (156N) 70m/s (156 mph) DC Grounded ASA Light Gray (RAL 7035 on all visible plastic parts) 880x200x200mm (2'11"x8"x8 ) 8.2kg (18 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08189 Rev A
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
1710-2170 MHz
Polarization Nominal Impedance (Ohm) VSWR Isolation betw een inputs (dB) Horizontal -3 dB beamw idth Tracking,Horizontal plane, 60 (dB) Electrical dow ntilt Vertical -3dB Beam w idth Sidelobe suppression, Vertical 1 st upper (dB) Vertical beam squint First null-f ill (dB) Front-to-back ratio (dB) Front-to-back ratio, total pow er (dB) Cross-polar discrimination (XPD) 0 (dB) Cross-polar discrimination 60 (dB) IM3, 2Tx@43dBm (dBc) IM7, 2Tx@43dBm (dBc) Pow er Handling, Average per input (W) Pow er Handling, Average total (W)
643
12.81.1
NETWORK OPTIMIZATION
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 100 mph(44.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female 709x167x89.5mm (24x7x4 ) 7.3 kg (16 lbs) 35 lbf (156N) 70m/s (156 mph) DC Grounded ASA Light gray RAL 7035 on all visible plastic parts 880x200x200mm (2'11"x8"x8 ) 8.2kg (18 lbs)
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08190 Rev.A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
1900-2025,2110-2170 18.3
COVERAGE AND CAPACITY
1710-2170 MHz
VSWR Isolation betw een inputs (dB) Horizontal -3 dB beamw idth Tracking,Horizontal plane, 60 (dB) Electrical dow ntilt Vertical -3dB Beam w idth Sidelobe suppression, Vertical 1st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total pow er (dB) Cross-polar discrimination (XPD) 0 (dB) Cross-polar discrimination 60 (dB) IM3, 2Tx@43dBm (dBc) IM7, 2Tx@43dBm (dBc) Pow er Handling, Average per input (W) Pow er Handling, Average total (W)
643
TECHNOLOGY LEADERSHIP
6.40.5
NETWORK OPTIMIZATION
All specifications are subject to change without notice. Contact factory for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight With Brackets Wind Load, Frontal, 100 mph(44.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female 1309x167x89.5mm (44x7x4 ) 10.1 kg (22 lbs) 70 lbf (310N) 70m/s (156 mph) DC Grounded ASA Light gray RAL 7035 on all visible plastic parts 1480x200x200mm (4'10"x8"x8 ) 11kg (24.2 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08191 RevA
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
1900-2025,2110-2170 18.3
COVERAGE AND CAPACITY
1710-2170 MHz
VSWR Isolation betw een inputs (dB) Horizontal -3 dB beamw idth Tracking,Horizontal plane, 60 (dB) Electrical dow ntilt Vertical -3dB Beam w idth Sidelobe suppression, Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total pow er (dB) Cross-polar discrimination (XPD) 0 (dB) Cross-polar discrimination 60 (dB) IM3, 2Tx@43dBm (dBc) IM7, 2Tx@43dBm (dBc) Pow er Handling, Average per input (W) Pow er Handling, Average total (W)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
643
TECHNOLOGY LEADERSHIP
6.40.5
NETWORK OPTIMIZATION
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 100 Mph Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female 1309x167x89.5mm (44x7x4 ) 10.1 kg (22 lbs) 310N (70 lbf) 70m/s (156 mph) DC Grounded ASA Light Gray RAL 7035 on all visible plastic parts 1480x200x200mm (4'10"x8"x8 ) 11kg (24.2 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08192 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
1710-1880 17.5
1900-2025,2110-2170 18.3
COVERAGE AND CAPACITY
1710-2170 MHz
TECHNOLOGY 643LEADERSHIP
6.40.5
NETWORK OPTIMIZATION
All specifications are subject to change without notice. Contact factory for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight With Brackets Wind Load, Frontal, 100 mph(44.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female 1309x167x89.5mm (44x7x4 ) 10.1 kg (22 lbs) 310N (70 lbf) 70m/s (156 mph) DC Grounded ASA Light gray RAL 7035 on all visible plastic parts 1480x200x200mm (4'10"x8"x8 ) 11kg (24.2 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08193 Rev A
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
1900-2025,2110-2170 15.6
COVERAGE AND CAPACITY
1710-2170 MHz
643
TECHNOLOGY LEADERSHIP
12.50.9
NETWORK OPTIMIZATION
>18 >13
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, @100 mph(44,7m/s) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female, 7720.00 - bottom, 7720.40 - top 709x167x89.5mm (24x7x4) 7.3 kg (16 lbs) 35 lbf (156 N) 70m/s (156 mph) DC Grounded ASA Light gray RAL 7035 on all visible plastic parts 211x8x8 (880x200x200mm) 8.2kg (18 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08194 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperturecoupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beamwidth over the frequency band, as well as a high front-to-back ratio. Powerwave broadband antennas come with Manually adjustable Electrical Tilt (MET) which offers operators flexibility in turning of tilt angles, as well as logistical advantages, and is Remote Electrical Tilt (RET) upgradeable. This design ensures the highest possible cross-polar discrimination value.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
1710-2170 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal -3 dB Beam width Tracking,horizontal plane, 60 (dB) Electrical downtilt range (adjustable) Vertical -3dB Beam width Sidelobe suppression, vertical 1st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (XPD) 0 (dB) Cross-polar discrimination 60 (dB) Power Handling, Average Per Input (W) Power Handling, Average Total (W) IM3, 2Tx@43dBm (dBc) IM7, 2Tx@43dBm (dBc) >17 >18 7 0.4 67 3 1710-1880 17.5 1850-1990 18 Dual linear 45 50 1.4:1 30 66 2 <1.0 0 to 8 6.6 0.4 0.5 >-24 , typical >-18 >30 >27 >19 >14 250 500 <-153 <-153 < -160 >20 >12 6.3 0.6 >18,18,16,16,14 @ 0,2,4,6,8 MET 64 3 1900-2025, 2110-2170 18.3
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 100 mph(44.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female, 7721.00 - bottom, 7721.40 - top 1309x167x89.5mm (44x7x4) 10.1 kg (22 lbs) 310N (70 lbf) 70m/s (156 mph) DC grounded ASA Light Gray (RAL 7035 on all visible plastic parts) 1480x200x200mm (4'10"x8"x8") 11kg (24.2 lbs)
Do31-08195 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperturecoupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beamwidth over the frequency band, as well as a high front-to-back ratio. Powerwave broadband antennas come with Manually adjustable Electrical Tilt (MET) which offers operators flexibility in turning of tilt angles, as well as logistical advantages, and is Remote Electrical Tilt (RET) upgradeable. This design ensures the highest possible cross-polar discrimination value.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
1710-2170 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal -3 dB Beam width Tracking,horizontal plane, 60 (dB) Electrical downtilt range (adjustable) Vertical -3dB Beam width Sidelobe suppression, vertical 1st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (XPD) 0 (dB) Cross-polar discrimination 60 (dB) Power Handling, Average Per Input (W) Power Handling, Average Total (W) IM3, 2Tx@43dBm (dBc) IM7, 2Tx@43dBm (dBc) >17 >18 7 0.4 67 3 1710-1880 17.5 1850-1990 18 Dual linear 45 50 1.4:1 30 66 2 <1.0 2 to 10 6.6 0.4 0.5 >-24 , typical >-18 >30 >27 >19 >14 250 500 <-153 <-153 < -160 >20 >12 6.3 0.6 >18,16,16,14,13 @ 2,4,6,8,10 MET 64 3 1900-2025, 2110-2170 18.3
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 100 mph(44.7m/s) Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female 1309x167x89.5mm (44x7x4) 10.1 kg (22 lbs) 310N (70 lbf) 70m/s (156 mph) DC grounded ASA Light Gray (RAL 7035 on all visible plastic parts) 1480x200x200mm (4'10"x8"x8") 11kg (24.2 lbs)
D031-08196 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
1710-2170 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs (dB) Horizontal -3 dB beamwidth Tracking,Horizontal plane, 60 (dB) Electrical downtilt range (adjustable) Vertical -3 dB Beam width Sidelobe suppression, 1st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (XPD) 0 (dB) Cross-polar discrimination 60 (dB) Power Handling, Average per input (W) Power Handling, Average total (W) IM3, 2Tx@43dBm IM7, 2Tx@43dBm All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data. <-153 >18 >20 4.7 0.3 67 3 1710-1880 19 1850-1990 19.2 1900-2025, 2110-2170 19.7
Dual slant 45
50 1.4:1 >30 66 2 <1.0 0 to 5.5 4.4 0.2 0.4 >-20 , typical >-16 >30 >27 >20 >17 250 500 <-153 < -160 >21 >12 4.2 0.3 >18,18,18,16,16,14 @ 0,1,2,3,4,5 65 3
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight Including Brackets Wind Load, Frontal, 100 mph Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Mounting 7/16 DIN female, 7722.00 - bottom, 7722.40 - top 1934x167x89.5mm (64x6.6x3.5) 12.6 kg (27.7 lbs ) 412 N (92.6 lbf) 70m/s (156 mph) DC Grounded ASA Grey (RAL 7035 on all visible plastic part) 2105x200x200mm (6'11"x8"x8") Pole Clamps, Panning Mechanism
D031-08197 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
1900-2025,2110-2170 13.7
COVERAGE AND CAPACITY
1710-2170 MHz
VSWR Isolation betw een inputs (dB) Horizontal -3 dB beamw idth Tracking,Horizontal plane, 60 (dB) Electrical dow ntilt range (adjustable) Vertical -3dB Beam w idth Sidelobe suppression, 1st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total pow er (dB) Cross-polar discrimination (XPD) 0(dB) Cross-polar discrimination 60 (dB) IM3, 2Tx@43dBm (dBc) IM7, 2Tx@43dBm (dBc) Pow er Handling, Average per input (W) Pow er Handling, Average total (W)
874
TECHNOLOGY LEADERSHIP
12.21
NETWORK OPTIMIZATION
>12 >10
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, Hxwxd Wind Load, Frontal, 100 mph Cd=1 Weight With Brackets Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
7/16 DIN female, 7735.00 - bottom, 7735.40 - top Bottom 709x167x89mm (24x7x4 ) 35 lbf (156 N) 8.2 kg (18 lbs) 70 m/s (156 mph) DC grounded PVC Light Gray 880x200x200mm (211x8x8 ) 9.1 kg (20 lbs)
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
D031-08198 Rev A
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
1710-2170 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs, 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking,Horizontal plane, 60 (dB) Electrical downtilt range (adjustable) Vertical Beam width -3dB Sidelobe suppression, 1st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (XPD) 0 (dB) Cross-polar discrimination 60 (dB) IM3, 2Tx@43dBm (dBc) IM7, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) >14 >10 <-153 1710-1880 16.3 1850-1990 16.5 Dual linear 45 50 1.4:1 30 86 3 <1.0 0 to 8 7.1 0.5 6.6 0.5 6.3 0.8 >18,17,15,15,14 @ 0,2,4,6,8 MET 0.4 >-24 , typical >-18 >29 >23 >13 >10 <-153 < -160 250 500 >12 >10 1900-2025, 2110-2170 16.5
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 100 mph Cd=1 Wind Deflection 78 mph Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female, 7740.00 - bottom, 7740.40 - top Bottom 1309x167x89mm (51.5x6.6x3.5) 356 N (80 lbf) < 1 70m/s (156 mph) DC grounded PVC Light Gray 1480x200x200mm (58.3x8x8) 13kg (28,6 lbs)
D031-08199 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for flexibility of tilt angles, while ensuring the highest possible crosspolar discrimination value.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
1710-2170 MHz
Frequency band (MHz) Gain, 0.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs, 824-960MHz (dB) Horizontal -3 dB beamwidth Tracking,Horizontal plane, 60 (dB) Electrical downtilt range (adjustable) Vertical Beam width -3dB Sidelobe suppression, Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (XPD) 0 (dB) Cross-polar discrimination 60 (dB) IM3, 2Tx@43dBm (dBc) IM7, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W)
1710-1880 17.5
4.7 0.4 4.2 0.4 4.5 0.3 >18,18,16,16,14,14 @ 0,1,2,3,4,5 MET 0.3 >-24 , typical >-18 >29 >23 >14 >13 >12 >10 >10 >10 <-153 <-153 < -160 250 500
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 100 mph Cd=1 Wind Deflection 78 mph Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female, 7745.00 - bottom, 7745.40 - top Bottom 1934x167x89mm (6'4"x6.6x3.5") 412 N (92.6 lbf) < 1 70m/s (156 mph) DC grounded PVC Light Gray 2105x200x200mm (6'11"x8"x8") 15.8 kg (34.8 lbs)
D031-08200 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
1710-2170 MHz
Electrical Specifications
Frequency Range (MHz) Frequency Band (MHz) Gain, 0.5(dBi) Polarization Nominal impedance (Ohm) VSWR, RX Isolation between inputs (dB) Horizontal -3 dB beamwidth Horizontal tracking (dB) Cross-polar discrimination (XPD) 0 (dB) Cross-polar discrimination 60 (dB) Vertical -3 dB beamwidth Electrical downtilt Vertical beam squint Front-to-back ratio, total power (dB) Front-to-back ratio, co-polar (dB) First upper sidelobe suppression (dB) First null below horizon (dB) Power Handling, Average Per Input (W) Power Handling, Average Total (W) IM, 3rd order, 2Tx@43dBm (dBc) IM, 7th order, 2Tx@43dBm (dBc) 2 x 1710 - 2170 1710 1880 1850 1990 1900 2025, 2110 2170 17.5 18 18.5 Dual linear 45 50 < 1.4:1 > 30 67 4 65 4 63 4 < 2.0 > 16 > 18 > 20 > 16 > 13 > 10 7.1 0.4 6.8 0.4 6.2 0.6 0 to 8 < 0,5 > 28 > 28 > 22, 20, 18, 16, 14 @ 0, 2, 4, 6, 8 edt > -24 (typical >-18) 250 1000 < -153 < -160
COVERAGE AND CAPACITY
TECHNOLOGY LEADERSHIP
NETWORK OPTIMIZATION
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind load, frontal, 42 m/s Cd=1 (N) Wind Deflection 78 mph Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 4x 7/16 DIN female, 7760.00 - bottom, 7760.40 - top Bottom 1320x343x100mm (4'4"x12x4) 499 N (112 lbf) < 1 70m/s (156 mph) DC grounded ASA Light Gray 1480x400x200mm (4'10"x14"x8") 20 kg (44 lbs)
D031-08204 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
1710-2170 MHz
Electrical Specifications
Frequency Range (MHz) Frequency Band (MHz) 1710 1880 2 x 1710 - 2170 1850 1990 1900 2025, 2110 2170 19.7
COVERAGE AND CAPACITY
Gain, 0.5(dBi) 18.8 19.2 Polarization Dual linear 45 Nominal impedance (Ohm) 50 VSWR, RX < 1.4:1 Isolation between inputs (dB) > 30 Horizontal -3 dB beamwidth 67 4 65 4 63 4 Horizontal tracking (dB) < 2.0 Cross-polar discrimination (XPD) 0 (dB) > 16 > 18 > 20 Cross-polar discrimination 60 (dB) > 16 > 13 > 10 Vertical -3 dB beamwidth 4.7 0.4 4.4 0.4 4.2 0.6 Electrical downtilt 0 to 5.5 Vertical beam squint < 0.5 Front-to-back ratio, total power (dB) > 28 Front-to-back ratio, co-polar (dB) > 28 First upper sidelobe suppression (dB) > 22, 20, 18, 16, 15, 14 @ 0, 1, 2, 3, 4, 5 edt First null below horizon (dB) > -22 (typical >-18) Power Handling, Average Per Input (W) 250 Power Handling, Average Total (W) 1000 IM, 3rd order, 2Tx@43dBm (dBc) < -153 IM, 7th order, 2Tx@43dBm (dBc) < -160
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
TECHNOLOGY LEADERSHIP
NETWORK OPTIMIZATION
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind load, frontal, 42 m/s Cd=1 (N) Wind Deflection 78 mph Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 4x 7/16 DIN female, 7765.00 - bottom, 7765.40 - top Bottom 1934x343x100mm (6'4"x12x4) 868 N (195 lbf ) < 1 70m/s (156 mph) DC grounded ASA Light Gray 2105x400x200mm (6'11"x14"x8") 24 kg (55 lbs)
D031-08206 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
1710-2170 MHz
Electrical Specifications
Frequency Range Frequency Band (MHz) Gain, 0.5 (dBi) Polarization Nominal impedance (Ohm) VSWR, RX Isolation between inputs (dB) Horizontal -3 dB beamwidth Horizontal tracking (dB) Cross-polar discrimination (XPD) 0 (dB) Cross-polar discrimination 60 (dB) Vertical -3 dB beamwidth Electrical downtilt Vertical beam squint Front-to-back ratio, co-polar (dB) Front-to-back ratio, total power (dB) First upper sidelobe suppression (dB) First null below horizon (dB) Power Handling, Average Per Input (W) Power Handling, Averge Total (W) IM, 3rd order, 2Txa@43 dBc IM, 7th order, 2Txa@43 dBc 1710 1880 16.3 2 x 1710 - 2170 1850 1990 1900 2025 2110 2170
16.7 16.5 Dual linear 45 50 < 1.4:1 > 30 89 9 93 5 90 7 < 2.0 > 16 > 16 > 16 >8 >8 >8 7.0 0.5 6.7 0.5 6.3 0.9 0 to 8 < 0.5 > 27 dB > 23 dB > 22, 20, 18, 16, 14 @ 0, 2, 4, 6, 8 EDT -25 (typical >-18) 250 1000 < -153 < -160
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 42m/s Cd=1 Wind Deflection 78 mph Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 4 X 7/16 DIN female, 7762.00 - bottom, 7762.40 - top Bottom 1320x343x100mm (44x12x4) 499N (112 lbf) < 1 70m/s (156 mph) DC grounded ASA Light Gray 1480x400x200mm (4'10"x14"x8") 22 kg (49 lbs)
D031-08205 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
1710-2170 MHz
17.4
17.6
17.8
Polarization Dual linear 45 Nominal impedance (Ohm) 50 VSWR, RX < 1.4:1 Isolation between inputs (dB) > 30 Horizontal -3 dB beamwidth 89 9 93 5 90 7 Horizontal tracking (dB) < 2.0 Cross-polar discrimination (XPD) 0 (dB) > 16 > 16 > 16 Cross-polar discrimination 60 (dB) >8 >8 >8 Vertical -3 dB beamwidth 4.7 0.5 4.4 0.5 4.2 0.9 Electrical downtilt 0 to 5.5 Vertical beam squint < 0.5 Front-to-back ratio, co-polar (dB) > 27 dB Front-to-back ratio, total power (dB) > 23 dB First upper sidelobe suppression (dB) > 22, 20, 18, 16, 15, 14 @ 0, 1, 2, 3, 4, 5 EDT First null below horizon (dB) > -25 (typical >-18) Power Handling, Average Per Input (W) 250 Power Handling, Averge Total (W) 1000 IM, 3rd order, 2Txa@43 dBc < -153 IM, 7th order, 2Txa@43 dBc < -160 All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 42m/s Cd=1 Wind Deflection 78 mph Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 4 X 7/16 DIN female, 7766.00 - bottom, 7766.40 - top Bottom 1934x343x100mm (64x12x4) 868N (195 lbf) < 1 70m/s (156 mph) DC grounded ASA Light Gray 2105x400x200mm (6'11"x14"x8") 26 kg (57 lbs)
D031-08207 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960/1710-1880MHz
The Powerwave ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics. Its outer radome is made of glass-fiber reinforced polyester (GRP), while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands, with no need for diplex filters. This technique minimizes intermodular distortion, while generating less loss and ensuring higher gain, maximum efficiency, for each set of beamwidths. The ALXC is available in a number of variants, to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.
Key Benefits High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
870-960/1710-1880 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi, dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Sidelobe suppression, Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 870-960 / 1710-1880 15.5/15.0, 13.4/12.9 Dual linear slanted 50 <1.5:1 >30 65 +/-5 0 13/13 >13 / 15 >-20 >26 >22 >11 >-150 300 600
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1450x280x125mm (49x11x5) 10.8kg (24 lbs) 450 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 1620x355x255mm (54x12x10) 13.5kg (30 lbs)
D031-08143 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960/1710-1880MHz
The Powerwave ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics. Its outer radome is made of glass-fiber reinforced polyester (GRP), while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands, with no need for diplex filters. This technique minimizes intermodular distortion, while generating less loss and ensuring higher gain, maximum efficiency, for each set of beamwidths. The ALXC is available in a number of variants, to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.
Key Benefits High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
870-960/1710-1880 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi, dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Sidelobe suppression, Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 870-960 / 1710-1880 15.5/15.0, 13.4/12.9 Dual linear slanted 50 <1.5:1 >30 65 +/-5 6 13/13 >13 / 15 >-20 >26 >22 >11 >-150 300 600
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1450x280x125mm (49x11x5) 10.8kg (24 lbs) 450 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 1620x355x255mm (54x12x10) 13.5kg (30 lbs)
D031-08143 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960/1710-1880MHz
Electrical Downtilt: 0 Horizontal Beamwidth: 65 Gain: 15.5/17.5 dBi (13.4/15.4 dBd) Connector Type: 7/16 DIN female
The Powerwave ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics. Its outer radome is made of glass-fiber reinforced polyester (GRP), while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands, with no need for diplex filters. This technique minimizes intermodular distortion, while generating less loss and ensuring higher gain, maximum efficiency, for each set of beamwidths. The ALXC is available in a number of variants, to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.
Key Benefits High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
870-960/1710-1880 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi, dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression, Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 870-960 / 1710-1880 15.5/17.5, 13.4/15.4 Dual linear slanted 50 <1.5:1 >30 <2 >11 65 +/-5 0 13/7 <0.5 >16 >-20/-18 >26 >22 >-150 300 600
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1450x280x125mm (49x11x5) 10.8kg (24 lbs) 450 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 1620x355x255mm (54x12x10) 13.5kg (30 lbs)
D031-08144 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960/1710-1880MHz
The Powerwave ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics. Its outer radome is made of glass-fiber reinforced polyester (GRP), while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands, with no need for diplex filters. This technique minimizes intermodular distortion, while generating less loss and ensuring higher gain, maximum efficiency, for each set of beamwidths. The ALXC is available in a number of variants, to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.
Key Benefits High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
870-960/1710-1880 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi, dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression, Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 870-960 / 1710-1880 15.5/17.5, 13.4/15.4 Dual linear slanted 50 <1.5:1 >30 <2 >11 65 +/-5 2 13/7 <0.5 >16 >-20/-18 >26 >22 >-150 300 600
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1450x280x125mm (49x11x5) 10.8kg (24 lbs) 450 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 1620x355x255mm (54x12x10) 13.5kg (30 lbs)
D031-08145 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960/1710-1880MHz
The Powerwave ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics. Its outer radome is made of glass-fiber reinforced polyester (GRP), while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands, with no need for diplex filters. This technique minimizes intermodular distortion, while generating less loss and ensuring higher gain, maximum efficiency, for each set of beamwidths. The ALXC is available in a number of variants, to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.
Key Benefits High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
870-960/1710-1880 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi, dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression, Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 870-960 / 1710-1880 15.5/17.5, 13.4/15.4 Dual linear slanted 50 <1.5:1 >30 <2 >11 65 +/-5 4 13/7 <0.5 >16 >-20/-18 >26 >22 >-150 300 600
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1450x280x125mm (49x11x5) 10.8kg (24 lbs) 450 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 1620x355x255mm (54x12x10) 13.5kg (30 lbs)
D)31-08146 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960/1710-1880MHz
The Powerwave ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics. Its outer radome is made of glass-fiber reinforced polyester (GRP), while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands, with no need for diplex filters. This technique minimizes intermodular distortion, while generating less loss and ensuring higher gain, maximum efficiency, for each set of beamwidths. The ALXC is available in a number of variants, to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.
Key Benefits High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
870-960/1710-1880 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi, dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression, Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 870-960 / 1710-1880 15.5/17.5, 13.4/15.4 Dual linear slanted 50 <1.5:1 >30 <2 >11 65 +/-5 6 13/7 <0.5 >16 >-20/-18 >26 >22 >-150 300 600
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1450x280x125mm (49x11x5) 10.8kg (24 lbs) 450 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 1620x355x255mm (54x12x10) 13.5kg (30 lbs)
D031-08147 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960/1710-1880MHz
The Powerwave ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics. Its outer radome is made of glass-fiber reinforced polyester (GRP), while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands, with no need for diplex filters. This technique minimizes intermodular distortion, while generating less loss and ensuring higher gain, maximum efficiency, for each set of beamwidths. The ALXC is available in a number of variants, to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.
Key Benefits High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
870-960/1710-1880 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi, dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression, Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 870-960 / 1710-1880 16.5/16 14.4/13.9 Dual linear slanted 50 <1.5:1 >30 <2 >11 65 +/-5 0 9/9 <0.5 >16 >-22/-22 >25 >21 >-150 300 600
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1990x280x125mm (66x11x5) 13.5kg (30 lbs) 610 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 2160x355x255mm (71x12x10) 16.5kg (36.4 lbs)
D031-08148 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960/1710-1880MHz
The Powerwave ALXC is a dual-polarized dualband 900/1800 MHz antenna with outstanding performance characteristics. Its outer radome is made of glass-fiber reinforced polyester (GRP), while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. ALXC radiating elements are based on a patented dualband function that allowed designing an antenna matched for two or several frequency bands, with no need for diplex filters. This technique minimizes intermodular distortion, while generating less loss and ensuring higher gain, maximum efficiency, for each set of beamwidths. The ALXC is available in a number of variants, to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dualband concept as an outstanding technique for enhancing system performance and cutting costs.
Key Benefits High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
870-960/1710-1880 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi, dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression, Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 870-960 / 1710-1880 16.5/16 14.4/13.9 Dual linear slanted 50 <1.5:1 >30 <2 >11 65 +/-5 2 9/9 <0.5 >16 >-22/-22 >25 >21 >-150 300 600
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1990x280x125mm (66x11x5) 13.5kg (30 lbs) 610 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 2160x355x255mm (71x12x10) 16.5kg (36.4 lbs)
D031-08149 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960/1710-1880MHz
The Powerwave ALXC is a dual-polarized dual band 900/1800 MHz antenna with outstanding performance characteristics. Its outer radome is made of glassfiber reinforced polyester (GRP), while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. ALXC radiating elements are based on a patented dual band function that allowed designing an antenna matched for two or several frequency bands, with no need for diplex filters. This technique minimizes intermodular distortion, while generating less loss and ensuring higher gain, maximum efficiency, for each set of beamwidths. The ALXC is available in a number of variants, to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dual band concept as an outstanding technique for enhancing system performance and cutting costs.
Key Benefits High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
870-960/1710-1880 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi, dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression, Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 870-960 / 1710-1880 16.5/16 14.4/13.9 Dual linear slanted 50 <1.5:1 >30 <2 >11 65 +/-5 4 9/9 <0.5 >16 >-22/-22 >25 >21 >-150 300 600
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1990x280x125mm (66x11x5) 13.5kg (30 lbs) 610 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 2160x355x255mm (71x12x10) 16.5kg (36.4 lbs)
D031-08150 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
870-960/1710-1880MHz
The Powerwave ALXC is a dual-polarized dual band 900/1800 MHz antenna with outstanding performance characteristics. Its outer radome is made of glassfiber reinforced polyester (GRP), while the inner RF-module utilizes sophisticated patch technology for covering the two frequencies. ALXC radiating elements are based on a patented dual band function that allowed designing an antenna matched for two or several frequency bands, with no need for diplex filters. This technique minimizes intermodular distortion, while generating less loss and ensuring higher gain, maximum efficiency, for each set of beamwidths. The ALXC is available in a number of variants, to provide the widest range of solutions for specific individual cell-planning strategies implemented by Powerwave clients. Research and field studies conducted in cooperation with system suppliers and operators establish the Powerwave dual band concept as an outstanding technique for enhancing system performance and cutting costs.
Key Benefits High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
870-960/1710-1880 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi, dBd) Polarization Nominal Impedance (Ohm) VSWR Isolation between inputs(dB) Horizontal tracking (dB) Cross-polar discrimination (dB) Horizontal -3 dB beamwidth Electrical downtilt Vertical -3dB Beam width Vertical beam squint Sidelobe suppression, Vertical 1 st upper (dB) First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) IM3, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 870-960 / 1710-1880 16.5/16 14.4/13.9 Dual linear slanted 50 <1.5:1 >30 <2 >11 65 +/-5 6 9/9 <0.5 >16 >-22/-22 >25 >21 >-150 300 600
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions, HxWxD Weight with Brackets Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping weight 7/16 DIN female 1990x280x125mm (66x11x5) 13.5kg (30 lbs) 610 70m/s (156 mph) DC Grounded GRP Light gray RAL 7035 on all visible plastic parts 2160x355x255mm (71x12x10) 16.5kg (36.4 lbs)
D031-08151 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-960/1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provides a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value. Available with Powerwaves pre-mounted RET solution and upgradeable in field.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity maximizes diversity gain Excellent pattern performance and high gain over frequency Guaranteed passive intermodulation performance Light, slim and robust design
824-960/1710-2170 MHz
Electrical Specifications
Frequency band (MHz) Gain, 0.5dB (dBi)/(dBd) Polarization Nominal Impedance (Ohm) VSWR VSWR Isolation between inputs (dB) Isolation between inputs (dB) Inter band isolation (dB) Horizontal -3 dB beamwidth Tracking, Horizontal plane, 60 (dB) Tracking, Horizontal plane, 60 (dB) Electrical downtilt range (adjustable) Vertical -3 dB beamwidth Sidelobe suppression, Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) IM3, @2x43dBm (dBc) IM3, @2x43dBm (dBc) Average IM7, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 824-960 14.2/12.1 Dual linear 45 50 1.5:1 1.5:1 30 30 40 69 6 <1.0 2 to 12 14.3 2.0 > 18,17,16,16,15,15 x=2, 4, 6, 8,10,12 MET 1.5 <-25 >27 >24 <-153 63 7 <2.0 0 to 8 6.6 1 > 18,18,16,15,14 x=0, 2, 4, 6, 8 MET 0.8 <-25 >27 >24 <-153 <-160 250 500 1710-2170 17.5/15.4
300 600
All specifications are subject to change without notice. Contact factory for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Mounting Packing Size 7/16 DIN female, 7750.00 - bottom, 7750.40 - top Bottom 1408mm x 280mm x 125mm (47x11x5) 15.8 kg (35 lbs) 435N (98 lbf) 70m/s (156 mph) DC grounded GRP Grey (RAL 7035 on all visible plastic part) Pre-mounted Standard Brackets 1550mm x 355mm x 255mm (61x14x10)
D031-08201 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
824-960/1710-2170 MHz
The Powerwave dual band dual polarized broadband antenna has individual adjustable electrical downtilt per band. Four connector ports allow separate tilts on each frequency band and ensure the use of diversity concepts. The phase shifter technology, based on a patented sliding dielectric, minimizes intermodulation distortion and maximizes efficiency. The slant +/- 45 dual polarization system provides the independent fading signals needed for achieving top-quality coverage via diversity concepts. The Powerwave Broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design which provides a very small variation of the 3dB horizontal beam width over the frequency band as well as a high front-to-back ratio.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
824-960/1710-2170 MHz
Electrical Specifications
Frequency band (MHz) 824-960 1710-2170 Gain, 0.5 (dBi) 15.9 17.5 Polarization Dual linear 45 Nominal Impedance (OHM) 50 VSWR, 824-960MHz 1.5:1 VSWR, 1710-2170MHz 1.5:1 Isolation between inputs, 824-960MHz (dB) 30 Isolation between inputs, 1710-2170MHz (dB) 30 Inter band isolation, MHz (dB) 40 Horizontal -3 dB beamwidth 69 6 63 7 Tracking,Horizontal plane, 824-960MHz, 60 (dB) <1.0 <2.0 Tracking,Horizontal plane, 1710-2170MHz, 60 (dB) Electrical downtilt range (adjustable) 2 to 9 0 to 8 9.2 1.0 6.6 1.0 Vertical -3 dB beamwidth Sidelobe suppression, Vertical 1 st upper (dB) > 17,16,15,14 > 17,16,15,14,13 dB x=2, 4, 6, 8 MET x=0, 2, 4, 6, 8 MET Vertical beam squint 0.8 0.8 First null-fill (dB) < -25 < -25 Front-to-back ratio (dB) >27 >27 Front-to-back ratio, total power (dB) >24 >24 Average IM3, 2Tx@43dBm (dBc) < -153 Average IM3, 2Tx@43dBm (dBc) < -153 Average IM7, 2Tx@43dBm (dBc) < -160 Power Handling, Average per input (W) 300 250 Power Handling, Average total (W) 600 500
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Weight Including Brackets Weigh Excluding Brackets Wind Load, Frontal, 42m/s Cd=1 Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size 7/16 DIN female, 7752.00 - bottom, 7752.40 - top Bottom 2033mm x 280mm x 125mm (67 x 11x 5) 19.7kg (44lbs) 16kg (35lbs) 628N (141lbf) 70m/s (156mph) DC grounded GRP Light Gray 2175mm x 355mm x 255mm (74"x14"x10")
D031-08202 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
824-960/1710-2170 MHz
The Powerwave dual band dual polarized broadband antenna has individual adjustable electrical downtilt per band. Four connector ports allow separate tilts on each frequency band and ensure the use of diversity concepts. The phase shifter technology, based on a patented sliding dielectric, minimizes intermodulation distortion and maximizes efficiency. The slant +/- 45 dual polarization system provides the independent fading signals needed for achieving top-quality coverage via diversity concepts. The Powerwave Broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide VSWR bandwidth. The antennas have superior radiation patterns due to a unique reflector design which provides a very small variation of the 3dB horizontal beam width over the frequency band as well as a high front-to-back ratio.
Key Benefits Excellent broad- and multi-band capabilities Polarization purity makes good diversity gain Excellent pattern performance and high gain over frequency High passive intermodulation performance Light, slim and robust design
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi) Polarization Nominal Impedance (Ohm) VSWR, 824-960MHz VSWR, 1710-2170MHz Isolation between inputs, 824-960MHz (dB) Isolation between inputs, 1710-2170MHz (dB) Inter band isolation, MHz (dB) Horizontal -3 dB beamwidth Tracking,Horizontal plane, 824-960MHz, 60 Tracking,Horizontal plane, 1710-2170MHz, 60 Electrical downtilt range (adjustable) Vertical -3 dB beamwidth Sidelobe suppression, Vertical 1 st upper (dB) Vertical beam squint First null-fill (dB) Front-to-back ratio (dB) Front-to-back ratio, total power (dB) Cross-polar discrimination (XPD) 60 (dB) Average IM3, 2Tx@43dBm (dB) Average IM3, 2Tx@43dBm (dB) Average IM7, 2Tx@43dBm (dB) Power Handling, Average per input (W) Power Handling, Average total (W) 824-960 17.5 Dual linear 45 50 1.5:1 1.5:1 30 30 38 65 <2.0dB 2 to 8 6 > 17 @2 MET 0.8 < -25 > 28 >25 >11 -150 65 <1.5dB 0 to 8 6 > 17 @2 MET 0.8 < -25 >30 >25 >11 -153 -160 250 500 1710-2170 17.5
300 600
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 100 mph Cd=1 (N) Weight With Brackets Survival Wind Speed Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female, 7755.00 - bottom, 7755.40 - top Bottom 2630x280x125mm (88"x11x5) 868N (195 lbf) 19.6 kg (43 lbs) 70m/s (156 mph) DC grounded PVC Light Gray 2830x355x255mm (94"x12"x10") 23.3 kg (52 lbs)
D031-08203 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
7770.00A
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <2.0 <-25 0.5 >25 >25 15 >10 NA 30 90 15 824-896
PRELIMINARY
824-960 880-960 13.5/11.4 50 <1.5:1 90 15 0 to 10 >18,17,17x@0,5,10 40 <2.0 <-25 0.5 >25 >25 15 >10 NA <-153 NA 300 600 <2.0 <-25 0.5 >25 >25 15 >10 NA >18,17,17x@0,5,10 30 >18,16,15x@0,4,8 30 90 7 1710-1880 15.5/13.4 13.5/11.4
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/11.4, 15.5/13.4 TILT: MET LENGTH: 1.4m (4'7")
1710-2170 1850-1990 15.5/13.4 Dual linear 45 50 <1.5:1 90 7 0 to 8 >18,16,15x@0,4,8 30 40 <2.0 <-25 0.5 >25 >25 15 >10 NA <-153 <-160 250 600 <2.0 <-25 0.5 >25 >25 15 >10 NA >18,16,15x@0,4,8 30 90 9.5 1900-2170 15.5/13.4
Dual linear 45
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
7/16 DIN Female Bottom 1408x280x125mm Pre-mounted heavy duty brackets 17.6 (39) 12.1 (27) 952 42 (93) 55 (123) DC grounded GRP 1550x355x255 (61"x1'2"x10") Light Grey 21.5 (47.4) 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit www.powerwave.com/antennapatterns.asp.
7772.00A
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <2.0 <-25 0.5 >25 >25 15 >10 NA 30 90 9.5 824-896 15/12.9
PRELIMINARY
824-960 880-960 15/12.9 50 <1.5:1 90 8.9 0 to 7 >17,16,15x@0,4,8 40 <2.0 <-25 0.5 >25 >25 15 >10 NA <-153 NA 300 600 <2.0 <-25 0.5 >25 >25 15 >10 NA >17,16,15x@0,4,8 30 >15,14,13x@0,4,8 30 90 7 1710-1880 16/13.9
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15/12.9, 16/13.9 TILT: MET LENGTH: 2.0m (6'6")
1710-2170 1850-1990 16/13.9 Dual linear 45 50 <1.5:1 90 7 0 to 8 >15,14,13x@0,4,8 30 40 <2.0 <-25 0.5 >25 >25 15 >10 NA <-153 <-160 250 500 <2.0 <-25 0.5 >25 >25 15 >10 NA >15,14,13x@0,4,8 30 90 7 1900-2170 16/13.9
Dual linear 45
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 2033x280x125mm Pre-mounted heavy duty brackets 19.8 (44) 16.0 (35) 1375 42 (93) 55 (123) DC grounded GRP 2175x355x255 (7'2"x14"x10") Light Grey 27 (59.5) 7020.00, 7031.00, 7032.00, 7033.00 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit www.powerwave.com/antennapatterns.asp.
7775.00A
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) Front to back ratio, total power (dB) Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <2.0 <-25 0.5 >25 >25 15 >10 NA 30 90 7 824-896 16/13.9
PRELIMINARY
824-960 880-960 16/13.9 50 <1.5:1 90 7 0 to 6 >17,16,15x@0,3,6 40 <2.0 <-25 0.5 >25 >25 15 >10 NA <-150 NA 300 600 <2.0 <-25 0.5 >25 >25 15 >10 NA >17,16,15x@0,3,6 30 >16,15,13x@0,4,8 30 90 7 1710-1880 16/13.9
POLARIZATION: X-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16/13.9, 16/13.9 TILT: MET LENGTH: 2.6m (8'6")
1710-2170 1850-1990 16/13.9 Dual linear 45 50 <1.5:1 90 7 0 to 8 >16,15,13x@0,4,8 30 40 <2.0 <-25 0.5 >25 >25 15 >10 NA <-150 <-160 250 500 <2.0 <-25 0.5 >25 >25 15 >10 NA >16,15,13x@0,4,8 30 90 7 1900-2170 16/13.9
Dual linear 45
MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
4 x 7/16 DIN Female Bottom 2658x280x125mm Pre-mounted heavy duty brackets 25.1 (55) 19.6 (43) 1797 42 (93) 55 (123) DC grounded GRP 2800x355x255 (9'2"x1'2"x10") Light Grey 32.5 (71.6) 7020.00, 7031.00, 7032.00, 7033.10 7256.00, 7454.00, 2210.10
Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit www.powerwave.com/antennapatterns.asp.
824-960/2x1710-2170 MHz
The triple band solution from Powerwave offers a flexible antenna option for operators seeking excellent RF-performance as well as fast and successful rollout of their next-generation networks. Designed to overcome UMTS deployment challenges, such as space and installation issues as well as those of co-siting in demanding radio environments, these antennas include the Powerwave patented Manually-adjustable Electrical Tilt (MET) function, which offers operators flexibility in tuning antenna systems as well as logistical advantages. The Powerwave Triband antenna design is based on a patented stacked aperturecoupled patch technology for GSM 900-, GSM1800- and UMTS 2100 MHzbands. Finally, the advanced reflector and element structure in combination with a superior feeding network minimizes the weight and maximizes the overall performance of the antenna.
Mechanical Specifications
Connector type (6 pcs) Connector position Dimensions, HxWxD Weight, excluding brackets 3.5kg Wind load, frontal, 150 km/h, Cd=1, (N) Operating wind speed (m/s) Survival wind speed (m/s) Weatherproofing Radome material Radome colour Packing size HxWxD (mm) Shipping weight including bracket kit Mounting 7/16 female Bottom 1400 x 280 x 125mm ( 4' 7''x 11"x 5") 15kg ( 33lbs ) 428 55 70 According to T1102 GRP RAL 7035 on all visible plastic parts 1650 x 355 x 200mm ( 5' 5"x1' 2"x 8") 20kg (44lbs) Pre-mounted standard brackets
824-960/2x1710-2170 MHz
Electrical Specifications
Frequency band, MHz Gain 0.5(dBi) Polarization Nominal impedance (W) VSWR, 824-960 MHz VSWR, 1710-1880 MHz VSWR, 1900-2025MHz VSWR, 2110-2170MHz Isolation between inputs (dB), 824-960 MHz Isolation between inputs (dB), 1710-1880 MHz Isolation between inputs (dB), 1900-2025 MHz Isolation between inputs (dB), 2110-2170 MHz Inter band isolation, all bands (dB) Horizontal -3dB beam width Tracking, Horizontal plane, 824-896 MHz, 60 Tracking, Horizontal plane, 880-960 MHz, 60 Tracking, Horizontal plane, 1710-1880 MHz, 60 Tracking, Horizontal plane, 1900-2025 MHz, 60 Tracking, Horizontal plane, 2110-2170 MHz, 60 Electrical down tilt range (adjustable) Vertical Beam width -3dB MHz Side lobe suppression, Vertical 1stupper (dB) Side lobe suppression, Vertical Upper (dB) Vertical beam squint Front-to-back Ratio (dB) Front-to-back Ratio, Total Power (dB) Cross-polar discrimination (XPD) 60 (dB) IM3, 2Tx@43dBm (dBm) (dBc) IM3, 2Tx@43dBm (dBm) (dBc) IM7, 2Tx@43dBm (dBm) (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 824-960 14.5 dual linear 45 50 1.5:1 1710-1880 14.4 dual linear 45 50 1.5:1 1.5:1 1.5:1 30 30 >30 >30 68 5 <2.0dB <2.0dB 38 65 5 62 5 1900-2170 14.8 dual linear 45 50
<1.5dB <1.5dB <1.5dB 0 to12 131 >17, 16, 15, 14 X=0, 4, 8, 12 MET >10 1 >30 >25 >10
2 to12 142 >17, 16, 15, 14 X= 2, 4, 8, 12 MET >10 1 >28 >25 >11 -153
0 to12 141 >17, 16, 15, 14 X=0, 4, 8, 12 MET >10 1 >30 >25 >11 -153
300 600
250 500
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
900MHz
1800MHz
2100MHz
D031-08210 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
824-960/2x1710-2170 MHz
The triple band solution from Powerwave offers a flexible antenna option for operators seeking excellent RF-performance as well as fast and successful rollout of their next-generation networks. Designed to overcome UMTS deployment challenges, such as space and installation issues as well as those of co-siting in demanding radio environments, these antennas include the Powerwave patented Manually-adjustable Electrical Tilt (MET) function, which offers operators flexibility in tuning antenna systems as well as logistical advantages. The Powerwave Triband antenna design is based on a patented stacked aperturecoupled patch technology for cellular 800, GSM 900-, GSM1800, PCS 1900 and UMTS 2100 MHz-bands. Finally, the advanced reflector and element structure in combination with a superior feeding network minimizes the weight and maximizes the overall performance of the antenna.
Mechanical Specifications
Connector Type (6 Pcs) Connector Position Dimensions, HxWxD Weight, Excluding Brackets 3.5kg Wind Load, Frontal, 150 km/h, Cd=1, (N) Operating Wind Speed (M/s) Survival Wind Speed (M/s) Lightning Protection Weatherproofing Radome Material Radome Color Packing Size Hxwxd (Mm) Shipping Weight Including Bracket Kit Mounting 7/16 DIN female Bottom 2033 x 280 x 125mm ( 7' 1''x 11"x 5") 18kg ( 40lbs ) 21.5kg (47 lbs with brackets) 628 55 (123 mph) 70 (156 mph) DC-grounded According to T1102 GRP RAL 7035 on all visible plastic parts 2175x355x255 23.5kg (51 lbs) Pre-mounted standard brackets
824-960/2x1710-2170 MHz
Electrical Specifications
Frequency Band, MHz Gain 0.5dBi Polarization Nominal impedance (Ohm) VSWR, 824-960 MHz VSWR, 1710-1880 MHz VSWR, 1900-2025MHz VSWR, 2110-2170MHz Isolation between inputs (dB), 824-960 MHz Isolation between inputs (dB), 1710-1880 MHz Isolation between inputs (dB), 1900-2025 MHz Isolation between inputs (dB), 2110-2170 MHz Inter band isolation, all bands (dB) Horizontal -3dB beam width Tracking, Horizontal plane, 824-896 MHz, 60 Tracking, Horizontal plane, 880-960 MHz, 60 Tracking, Horizontal plane, 1710-1880 MHz, 60 Tracking, Horizontal plane, 1900-2025 MHz, 60 Tracking, Horizontal plane, 2110-2170 MHz, 60 Electrical down tilt range (adjustable) Vertical Beam width -3dB MHz Side lobe suppression, Vertical 1st upper (dB) Side lobe suppression, Vertical Upper (dB) Vertical beam squint Front-to-back Ratio (dB) Front-to-back Ratio, Total Power (dB) Cross-polar discrimination (XPD) 60 (dB) IM3, 2Tx@43dBm (dBc) IM3, 2Tx@43dBm (dBc) IM7, 2Tx@43dBm (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 824-960 16.5 dual linear 45 50 1.5:1 1710-1880;1850-1990 16.5 dual linear 45 50 1.5:1 1.5:1 1.5:1 > 30 > 30 > 30 > 30 67 < 1.0dB < 1.0dB > 34 65 64
NETWORK OPTIMIZATION TECHNOLOGY LEADERSHIP
< 1.5dB
2 to 9 9 1 >17, 13 @ 2,9 MET > 11 < 0.8 > 30 > 27 > 11 < -153
0 to10 10 1 >15 ,13 @ 0,10 MET > 12 < 0.8 > 30 > 27 > 10 < -153
< 1.5dB < 2.0dB 0 to 10 9 1 > 18, 15 @ 0, 10 MET > 10 < 0.8 > 30 > 27 > 10
QUALITY AND RELIABILITY
300 600
250 500
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
2100MHz
D031-08211 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
824-960/2x1710-2170 MHz
The triple band solution from Powerwave offers a flexible antenna option for operators seeking excellent RF-performance as well as fast and successful rollout of their next-generation networks. Designed to overcome UMTS deployment challenges, such as space and installation issues as well as those of co-siting in demanding radio environments, these antennas include the Powerwave patented Manually-adjustable Electrical Tilt (MET) function, which offers operators flexibility in tuning antenna systems as well as logistical advantages. The Powerwave Triband antenna design is based on a patented stacked aperturecoupled patch technology for cellular 800, GSM 900-, GSM1800, PCS 1900 and UMTS 2100 MHz-bands. Finally, the advanced reflector and element structure in combination with a superior feeding network minimizes the weight and maximizes the overall performance of the antenna.
Mechanical Specifications
Connector Type (6 Pcs) Connector Position Dimensions, HxWxD Weight, Excluding Brackets 3.5kg Wind Load, Frontal, 150 km/h, Cd=1, (N) Operating Wind Speed Survival Wind Speed Lightning Protection Weatherproofing Radome Material Radome Color Packing Size Hxwxd (Mm) Shipping Weight Including Bracket Kit Mounting 7/16 DIN female Bottom 2650 x 280 x 125mm ( 8' 8''x 11"x 5") 24kg ( 53lbs ) 27,5kg (60.5 lbs with brackets) 820 55m/s (123 mph) 70m/s (156 mph) DC-grounded According to T1102 GRP RAL 7035 on all visible plastic parts 2790 x 355 x 200mm ( 9' 2"x1' 2"x 8") 29kg (64lbs) Pre-mounted standard brackets
824-960/2x1710-2170 MHz
Electrical Specifications
Frequency Band, MHz Gain 0.5dBi Polarization Nominal impedance (Ohms) VSWR, 824-960 MHz VSWR, 1710-1880 MHz VSWR, 1900-2025MHz VSWR, 2110-2170MHz Isolation between inputs (dB), 824-960 MHz Isolation between inputs (dB), 1710-1880 MHz Isolation between inputs (dB), 1900-2025 MHz Isolation between inputs (dB), 2110-2170 MHz Inter band isolation, all bands (dB) Horizontal -3dB beam width Tracking, Horizontal plane, 824-896 MHz, 60 Tracking, Horizontal plane, 880-960 MHz, 60 Tracking, Horizontal plane, 1710-1880 MHz, 60 Tracking, Horizontal plane, 1900-2025 MHz, 60 Tracking, Horizontal plane, 2110-2170 MHz, 60 Electrical down tilt range (adjustable) Vertical Beam width -3dB MHz Side lobe suppression, Vertical 1st upper (dB) Side lobe suppression, Vertical Upper (dB) Vertical beam squint Front-to-back Ratio (dB) Front-to-back Ratio, Total Power (dB) Cross-polar discrimination (XPD) 60 (dB) IM3, 2Tx@43dBm (dBm) (dBc) IM3, 2Tx@43dBm (dBm) (dBc) IM7, 2Tx@43dBm (dBm) (dBc) Power Handling, Average per input (W) Power Handling, Average total (W) 824-960 17.4 dual linear 45 50 1.5:1 1710-1880;1850-1990 17.2 dual linear 45 50 1.5:1 1.5:1 1.5:1 30 30 >30 >30 65 <2.0dB <2.0dB 38 65 62
NETWORK OPTIMIZATION TECHNOLOGY LEADERSHIP
<1.5dB <1.5dB <1.5dB 0 to 8 6 >17 @ 0 MET >10 0.5 >30 >25 >10
300 600
250 500
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
2100MHz
D031-08212 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
Omni Antenna
360 3.0 m vertical-polarized FET Antenna Horizontal Beamwidth: 360 Gain: 11 dBi / 8.9 dBd Electrical Downtilt: 0o Connector Type: 7/16 DIN female
872-960 MHz
The Powerwave Omni-directional antenna consists of sleeve dipole elements welded to a thick-walled one-piece aluminum tube. This technique makes for an exceptionally stable structure that keeps tip deflections to a minimum even in gale-force winds. The cabling inside the tube combines with sophisticated, compact technology to ensure stable, well-controlled radiation patterns throughout the system s entire frequency band.
Key Benefits: High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
Omni Antenna
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi) (dBd) Polarization Nominal Impedance (Ohms) VSWR Horizontal -3 dB beamwidth Electrical downtilt Vertical - 3dB Beamwidth Vertical beam squint IM3, 2Tx@43dBm (dBc) 872-960 11 8.9 Linear vertical 50 <1.4:1 360 0 6.5 0.5 <-146
872-960 MHz
Typical Horizontal and Vertical 4168.11.33.00 Patterns All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Wind Deflection 35 m/s Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 3000x78mm (910"x3") 300N 70 m/s (156 mph) < 1 DC grounded PVC Light Gray 3300x150x170mm (10'10"x6"x7") 16kg (35lbs)
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
PN7722.00 REV.2
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
Omni Antenna
360 3.0 m vertical-polarized FET Antenna Horizontal Beamwidth: 360 Gain: 11 dBi / 8.9 dBd Electrical Downtilt: 2o Connector Type: 7/16 DIN female
872-960 MHz
The Powerwave Omni-directional antenna consists of sleeve dipole elements welded to a thick-walled one-piece aluminum tube. This technique makes for an exceptionally stable structure that keeps tip deflections to a minimum even in gale-force winds. The cabling inside the tube combines with sophisticated, compact technology to ensure stable, well-controlled radiation patterns throughout the system s entire frequency band.
Key Benefits: High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
Omni Antenna
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi) (dBd) Polarization Nominal Impedance (Ohms) VSWR Horizontal -3 dB beamwidth Electrical downtilt Vertical - 3dB Beamwidth Vertical beam squint IM3, 2Tx@43dBm (dBc) 872-960 11 8.9 Linear vertical 50 <1.4:1 360 2 6.5 0.5 <-146
872-960 MHz
Typical Horizontal and Vertical 4168.11.33.02 Patterns All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Wind Deflection 35 m/s Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 3000x78mm (910"x3") 300N 70 m/s (156 mph) < 1 DC grounded PVC Light Gray 3300x150x170mm (10'10"x6"x7") 16kg (35lbs)
PN7722.00 REV 2
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
Omni Antenna
360 3.0 m vertical-polarized FET Antenna Horizontal Beamwidth: 360 Gain: 11 dBi / 8.9 dBd Electrical Downtilt: 3o Connector Type: 7/16 DIN female
872-960 MHz
The Powerwave Omni-directional antenna consists of sleeve dipole elements welded to a thick-walled one-piece aluminum tube. This technique makes for an exceptionally stable structure that keeps tip deflections to a minimum even in gale-force winds. The cabling inside the tube combines with sophisticated, compact technology to ensure stable, well-controlled radiation patterns throughout the system s entire frequency band.
Key Benefits: High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
Omni Antenna
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi) (dBd) Polarization Nominal Impedance (Ohms) VSWR Horizontal -3 dB beamwidth Electrical downtilt Vertical - 3dB Beamwidth Vertical beam squint IM3, 2Tx@43dBm (dBc) 872-960 11 8.9 Linear vertical 50 <1.4:1 360 3 6.5 0.5 <-146
872-960 MHz
Typical Horizontal and Vertical 4168.11.33.03 Patterns All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Wind Deflection 35 m/s Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 3000x78mm (910"x3") 300N 70 m/s (156 mph) < 1 DC grounded PVC Light Gray 3300x150x170mm (10'10"x6"x7") 16kg (35lbs)
PN7722.00 REV. 2
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
900 MHz
Powerwave Technologies Omni directional antenna consists of sleeve dipole elements welded to a thick-walled one-piece aluminum tube. This technique makes for an exceptionally stable structure that keeps tip deflections to a minimum even in gale-force winds. The cabling inside the tube combines with sophisticated, compact technology to ensure stable, well-controlled radiation patterns throughout the system s entire frequency band.
900 MHz
Horizontal -3 dB beamwidth Vertical -3 dB beamwidth Electrical downtilt Vertical beam squint Maximum input power (W) IM, 3rd order, 2Tx@43 dBm (dBc)
All specifications are subject to change without notice. Contact factory for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed WindDdeflection 35 m/s LightningPprotection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 3000x78mm (910"x3") 300 70 m/s (156 mph) < 1 DC grounded PVC Light Gray 3300x150x170mm (10'10"x6"x7") 16kg (35lbs)
Comments:
Gain is typical within frequency band. Radiation patterns are typical for the antenna. Shipping weight including tilt brackets. Antenna is delivered with brackets pre-mounted* Radome color is NCS 2502-B (RAL 7035).
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
PN 4168.11.33.06 REV.1
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
Omni Antenna
360 3.0 m vertical-polarized FET Antenna Horizontal Beamwidth: 360 Gain: 11 dBi / 8.9 dBd Electrical Downtilt: 2 upside down Connector Type: 7/16 DIN female
872-960 MHz
The Powerwave Omni-directional antenna consists of sleeve dipole elements welded to a thick-walled one-piece aluminum tube. This technique makes for an exceptionally stable structure that keeps tip deflections to a minimum even in gale-force winds. The cabling inside the tube combines with sophisticated, compact technology to ensure stable, well-controlled radiation patterns throughout the system s entire frequency band.
Key Benefits: High gain performance Light and slim design Robust and reliable Pre-mounted brackets Guaranteed passive intermodulation performance
Omni Antenna
Electrical Specifications
Frequency band (MHz) Gain, 0.5 (dBi) (dBd) Polarization Nominal Impedance (Ohms) VSWR Horizontal -3 dB beamwidth Electrical downtilt Vertical - 3dB Beamwidth Vertical beam squint IM3, 2Tx@43dBm (dBc) 872-960 11 8.9 Linear vertical 50 <1.4:1 360 2 upside down 6.5 0.5 <-146
872-960 MHz
Typical Horizontal and Vertical 4168.11.33.52 Patterns All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Connector Position Dimensions, HxWxD Wind Load, Frontal, 42 m/s Cd=1 (N) Survival Wind Speed Wind Deflection 35 m/s Lightning Protection Radome Material Radome Color Packing Size Shipping Weight 7/16 DIN female Bottom 3000x78mm (910"x3") 300N 70 m/s (156 mph) < 1 DC grounded PVC Light Gray 3300x150x170mm (10'10"x6"x7") 16kg (35lbs)
D031-08111 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
800-2500 MHz
Powerwave multi-band solutions provide substantial savings in overall cost because they require less equipment and maintenance and shorter installation times while offering lower site costs. Considering multi-band network potential, what youre really doing is preparing for the future, today. Easy-to-install multiband antennas from Powerwave are deployed in numerous wireless networks worldwide. All have endured extensive field trials in close collaboration with cell planners and other communications providers to ensure Powerwave multi-band antennas perform to expectations. Using fewer antennas of discreetly functional design beats using numerous antennas of provocative size and appearance especially with todays aesthetic concerns.
Key Benefits: Light and slim design Robust and reliable Guaranteed passive intermodulation performance
800-2500 MHz
Frequency band (MHz) Gain, 0.5 (dBi/dBd) Polarization Nominal Impedance (Ohm) VSWR Beam width: Ceiling Mounted Beam width: Wall Mounted Electrical downtilt IM3, 2Tx@43dBm (dBc) Power Handling, Average total (W)
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Depth Diameter/Width (mm) Weight Radome Color Packing Size Shipping weight N female 65 mm (2,5) 185 mm (7) 0.2 kg (0.44lbs) White 210 x 200 x 115mm (8"x8"x5") 0.36 kg (0.8lbs)
D031-08158 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
800-2500 MHz
Powerwave multi-band solutions provide substantial savings in overall cost because they require less equipment and maintenance and shorter installation times while offering lower site costs. Considering multi-band network potential, what youre really doing is preparing for the future, today. Easy-to-install multiband antennas from Powerwave are deployed in numerous wireless networks worldwide. All have endured extensive field trials in close collaboration with cell planners and other communications providers to ensure Powerwave multi-band antennas perform to expectations. Using fewer antennas of discreetly functional design beats using numerous antennas of provocative size and appearance especially with todays aesthetic concerns.
Key Benefits: Light and slim design Robust and reliable Guaranteed passive intermodulation performance
800-2500 MHz
Frequency band (MHz) Frequency range (MHz) VSWR Gain, 0.5 (dBi/dBd) Beam width: Ceiling Mounted Beam width: Wall Mounted Electrical downtilt Polarization Power Handling, Average total (W) Nominal Impedance (Ohm) IM3, 2Tx@43dBm (dBc) 90 806-890 <1.9:1 6/3.9 90 890-960 <1.5:1 6/3.9 -
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Connector Type Dimensions (LxWxD) Weight Radome Color Packing Size Shipping weight N female 210 x 180 x 42 mm (8"x7"x2") 1.0 kg (2.2lbs) White 240 x 280 x 45 mm (9"x11"x2") 1.2 kg (2.6lbs)
D031-08159 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
RET Technology
Outdoor Usage
The Single Band RET Unit is part of the Powerwave RET Technology and consists of a stepping motor that can be connected to the positioning rod used for adjusting the electrical down tilt of Powerwave MET antennas. Upon command from the MCU, the stepping motor moves the positioning rod up or down to achieve the desired antenna tilt angle. The unit has dual RS-485 connectors for easy daisy chaining without the need for an external splitter. The unit can be mounted on site on an antenna that is already in place or can be delivered already mounted on a Powerwave antenna.
Key Benefits: Field upgradeable with installed MET antennas Optional factory pre-mounting on MET antennas Integrated RS-485 splitter for easy daisy chaining Field proven vented design
RET Technology
Technical Specifications
Product Number Power supply Current consumption Start up surge Current draw during Antenna tilting 7010.00 +9 to+30V < 1mC < 500 mA at Vin <10V < 400 mA at Vin <19V < 250 mA at Vin >19V < 100 mA at Vin <19V < 50 mA at Vin >19V 9.6 kbps, 38.4kbps < 0.8 mm 1 kg < 62 X 78 X 216 IEC 60130-9 (Ed. 3.0) M6 screw -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG. >500.000 hrs. IP65 ETSI 300 019
QUALITY AND RELIABILITY All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. NETWORK OPTIMIZATION COVERAGE AND CAPACITY
TECHNOLOGY LEADERSHIP
All other operational states AISG Data Rate Rod positioning accuracy Weight Dimensions (W,L,H) (mm) Connectors AISG output/ input Protection Ground Operation temperature range Type Approvals MTBF Ingress protection Environmental
The Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower mounted telecommunication equipment. The system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PN7010.XX
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
RET Technology
Outdoor Usage
The Dual Band RET Unit is part of the Powerwave RET Technology and consists of a stepping motor that can be connected to the positioning rod used for adjusting the electrical down tilt of Powerwave MET antennas. Upon command from the MCU, the stepping motor moves the positioning rod up or down to achieve the desired antenna tilt angle. The unit has dual RS-485 connectors for easy daisy chaining without the need for an external splitter. The unit can be mounted on site on an antenna that is already in place or can be delivered already mounted on a Powerwave antenna.
Key Benefits: Field upgradeable with installed MET antennas Optional factory pre-mounting on MET antennas Integrated RS-485 splitter for easy daisy chaining Field proven vented design Fully integrated dual RET motor housing
RET Technology
Technical Specifications
Product Number Power supply Current consumption Start up surge Current draw during Antenna tilting 7020.00 +9 to30V < 1mC < 500 mA at Vin <10V < 400 mA at Vin <19V < 250 mA at Vin >19V < 100 mA at Vin <19V < 50 mA at Vin >19V 9.6 kbps, 38.4kbps < 0.3mm 1 kg < 125 X 213 X 62 (excl mounting screws) IEC 60130-9 (Ed. 3.0) M6 screw -40 to +65C Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >500.000 hrs. IP55 ETSI 300 019
QUALITY AND RELIABILITY All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. NETWORK OPTIMIZATION COVERAGE AND CAPACITY
TECHNOLOGY LEADERSHIP
All other operational states AISG Data Rate Rod positioning accuracy Weight Dimensions (W,L,H) (mm) Connectors AISG output/ input Protection Ground Operation temperature range Type Approvals MTBF Ingress protection Environmental
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. The system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
D031-08234 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
RET Technology
Outdoor Usage
The Triple Band RET Unit is part of the Powerwave RET Technology and consists of a stepping motor that can be connected to the positioning rod used for adjusting the electrical down tilt of Powerwave MET antennas. Upon command from the MCU, the stepping motor moves the positioning rod up or down to achieve the desired antenna tilt angle. The unit has dual RS-485 connectors for easy daisy chaining without the need for an external splitter. The unit can be mounted on site on an antenna that is already in place or can be delivered already mounted on a Powerwave antenna.
Key Benefits: Field upgradeable with installed MET antennas Optional factory pre-mounting on MET antennas Integrated RS-485 splitter for easy daisy chaining Field proven vented design Fully integrated triple RET motor housing
RET Technology
Technical Specifications
Product Number Power supply Current consumption Start up surge Current draw during Antenna tilting 7030.00 +9 to30V < 1mC < 500 mA at Vin <10V < 400 mA at Vin <19V < 250 mA at Vin >19V < 100 mA at Vin <19V < 50 mA at Vin >19V 9.6 kbps, 38.4kbps < 0.3mm 1 kg < 125 X 213 X 62 (excl mounting screws) IEC 60130-9 (Ed. 3.0) M6 screw -40 to +65C Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. > 500.000 hrs. IP55 ETSI 300 019
NETWORK OPTIMIZATION COVERAGE AND CAPACITY
TECHNOLOGY LEADERSHIP
All other operational states AISG Data Rate Rod positioning accuracy Weight Dimensions (W,L,H) (mm) Connectors AISG output/ input Protection Ground Operation temperature range Type Approvals MTBF Ingress protection Environmental
QUALITY AND RELIABILITY All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. The system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PN0000000-00
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
7011.00
ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Power consumption during tilting Power consumption idle Data protocol Rod positioning accuracy Operation temperature range MTBF 7011.00 Ericsson +12 to +30V <10 W <1.5 W ISO/IEC 8482 and 1056-ASC/RET interface <+/-0.3 mm -40 to +65 C >1500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connectors output / input Ingress protection Environmental 1 kg <62 x 78 x 216 M6 screw DIN 45 326 IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
215
7031.00
ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Power consumption during tilting Power consumption idle Data protocol Rod positioning accuracy Operation temperature range MTBF 7031.00 Ericsson +12 to +30V <10 W <1.5 W ISO/IEC 8482 and 1056-ASC/RET interface <+/-0.3 mm -40 to +65 C >1500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connectors output / input Ingress protection Environmental 1 kg <125 x 213 x 62 (excluding mounting screws) M6 screw DIN 45 326 IP65 ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
216
RET Technology
SNMP Agent
The MCU is a part of the Powerwave Remote Control Electrical Down-Tilt (RET) System and controls, supervises and provides DC power to the RET System via a common bus. Electrical tilting of antennas and setting of TMA gain can be performed from a remote location such as the NOC (Network Operating Centre) using web or SNMP interface. Local management at the base station is also possible by connecting a computer directly to the MCU. The MCU is fully compatible with the generic Powerwave network management platform NetWay ManagerTM (NWM) for advanced network management with features such as fleet software download.
Key benefits:
User friendly interface for configuration and tuning of Antenna Line Devices Remote or local configurable via web interface (embedded element manager) Two Ethernet ports: one local port for connection to a computer, and one port for connection to a site LAN One RS-232 port for serial communication Eight alarm input ports for surveillance of external equipment
Two configurable external alarm output ports for connection to base station Integrated SNMP agent Compatible with Powerwave NWM for advanced network management
RET Technology
Specifications
Product Number Power supply DC / Current consumption AC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors Local alarm ports (IN port) Output voltage at open Output current at closed Local control ports (Out ports, 3-pole relays) Max input Voltage Max input current AISG data rate Weight Dimensions Connectors DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local alarm Type Approvals MTBF Operating temperature Environmental
7070.10 (AC) 7070.30 (24 V) 7070.50 (-48V) AC / 24V / -48V -48V /< 2.5A 115/230 VAC 1.7 / 1.0A +24 V DC 1.16 A 3.48 A 54 mC during <10 ms 5 1 V 5 2mA 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2,5 kg Width 19 rack, Height 44mm, Depth 207mm CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male IEC 60130-9 (Ed. 3.0) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs. -5C to 60C ETSI 300 019 * Weather-protected locations*
TECHNOLOGY LEADERSHIP
NETWORK OPTIMIZATION
All specifications subject to AND QUALITY change without notice. Please RELIABILITY contact your Powerwave Representative for complete performance data.
Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower mounted telecommunication equipment. The system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PN7070.XX
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
RET Technology
Part Number:
7060.00 ANT 7060.10 BTS
AISG Compatible
Outdoor Usage
The CILOC is part of the Powerwave RET System and makes it possible to connect antenna line devices (ALDs) to a Master Control Unit by using the RF feeder. The CILOC is used for transferring DC supply and data signals to the ALDs. The external DC supply and RS-485 signals on the CILOC unit are applied through a multi-pole connector. The DC supply and RS-485 signal interface is implemented in accordance to the AISG specification.
Key Benefits: Easy configuration and tuning of new equipment Power control and cell breathing by varying antenna coverage footprints Fine tuning of soft handover situation during live operation
Current Injector Layer 1 Converter
RET Technology
TECHNOLOGY LEADERSHIP
NETWORK OPTIMIZATION
The Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower mounted telecommunication equipment. The system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PN0000000-00
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Diplex Filter
Diplex Filter for 800/900 MHz and 1800/1900/2100 MHz with DC Transparency
The Powerwave Diplex Filter DCT is available both as a single and double unit. Each diplexer has one port for 800/900 MHz systems, one port for 1800/1900/2100 MHz systems and a common port. It is designed for outdoor use and intended for co-location of base stations to enable sharing of the feeder, TMA system and Antenna. The unit can be used both at the BTS end for combining frequency bands to a common port and at the Antenna end for splitting the frequency bands to separate antennas. The unit comprises of high Q band-pass filters, DC traps and lightning protection circuits. The Diplex Filter enables TMA systems to be implemented into the antenna line by allowing DC to be fed through the diplexer on the RF cable. Different DC path options are available in order to support single or dual band TMA solutions. A patented mechanical design is utilized where all circuits are integrated within the filter body. By this, the size and weight of the Diplex Filter is reduced considerably. The Powerwave unique design ensures superior power handling capability, CW and peak power, as well as low loss. A vented enclosure design is employed to prevent the affects of condensation, thereby guaranteeing long, reliable, maintenance free service in all environmental conditions. The Powerwave TMA product line offers an easy to install, cost effective solution for coverage enhancement and increased quality in mobile communication networks.
Key Benefits: Superior Power Handling Capability, CW and Peak Power Negligible Transmit Band Loss High Experienced MTBF DC Transparency
Diplex Filter
Technical Specifications
824-960 port Frequency range Insertion loss* Return loss Rejection (1710-1990 MHz) Max power 800 AMPS Max power 900 MHZ Intermodulation products, max. Frequency range Insertion loss* Return loss Rejection (824-960 MHz) Max power 1800 MHz Max power 1900 MHZ Intermodulation products, max. TMA supply voltage, fed via the RF cable According to IEC 61312-1 Size-W x H x D (without mounting plate) Weight (single unit) Volume Color Connectors Mounting kit for poles Temperature range MTBF 824-960 MHz <0.1 dB >20 dB >52 dB 400W average, 10 kW peak power 200 W average,1600 kW peak power -110 dBm (-153dBc) (two 43 dBm carriers in the Tx band) 1710-2170 MHz <0.2 dB >20 dB >52 dB 200 W average, 1600 kW peak power 200 W average, 5 kW peak power -110 dBm (-153dBc) (two 43 dBm carriers in the Tx band) <31 V, 2 A 3 kA 10/350 s; center pin (any port)-shield 112 x 158 x 74 mm (4.4 x 6.3 x 3.0 in) single unit <2,5 kg (single unit) 1.3 liter (single unit) Off white (NCS 1502-R) DIN 7/16 female. Hose clamps in stainless steel -40 C to +65 C (-40F to +149F) 10 million hours
1710-2100 port
Safety EN 609 50, UL 1950, ETL Ingress protection, IP65 EN 60 529 Environmental ETS 300 019 EMC ETS 300 342-3 *Typical. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
PN LGP219nn
Copyright Sept. 2004, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, the Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
900/1800 MHz
The Powerwave Diplexer 900/1800 with UMTS rejection is used to combine GSM 900 and GSM 1800 signals to a common feeder. Rejection between the GSM and UMTS systems is provided to suppress wide band noise and spurious signals between the systems. The filter has configurable DC transparency and integrated lightning protection on all ports to make it easy using TMAs in the antenna system. This unit is intended for indoor or outdoor installation. The Powerwave Diplexer is available both as a single and double unit. Each diplexer has one 880-960 port and one 1710-1880 port as well as a common port.
Key Benefits: Compact Design Inbuilt DC Bypass Excellent Power Handling Negligible RF Loss Lightning Protected
900/1800 MHz
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Size, WxHxD (without mounting plate) Weight Color Housing RF-connectors Mounting Kit Temperature Range MTBF Lightning Protection Safety Ingress Protection Environmental 136 x166 x63mm (5.5 x 6.5 x 2.51 in) <3 kg (6.6 lbs) Off White (NCS 1502-R) Aluminum, IP 65 DIN 7/16 female Hose Clamps in Stainless Steel o o -40 C to +65 C >10 Million Hours On all ports, even DC isolated EN 60 950 EN 60 529 ETS 300 019
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PNLGP144nn
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
1800/2100 Diplexer
Diplexer for 1800/2100 with Configurable DC Transparency
Frequency Range:
1710-1880 MHz / 1920-2170 MHz
1800/2100
The Powerwave Diplexer 1800/2100 is to be used for combining GSM 1800 and UMTS 2100 signals to a common feeder. Rejection between the GSM and UMTS systems is provided to suppress wide band noise and spurious signals between the systems. The diplexer has a configurable DC path to provide both DC and modulated subcarrier communication to TMA and RET systems over the feeder cable. This unit is intended for indoor or outdoor installations. Powerwave vented enclosure design is deployed to prevent the effect of condensation thereby guaranteeing long reliable, maintenance free service in all environmental conditions.
Key Benefits: Compact Design Inbuilt DC Transparency and Subcarrier Support for Data Communication Negligible Transmit Band Loss Lightning Protected on All Ports Full Band
1800/UMTS Diplexer
1800/2100 Diplexer
Electrical Specifications
1800 Ports Frequency Range, Full Band (MHz) Insertion Loss (dB) Return Loss (dB) Rejection UMTS UL Rejection UMTS DL Average Power Handling Peak Power IM, 2Tx@43dBm (dBc) 1710-1880 0.3 in Rx, 0.6 in Tx >18 >74 >59 >240 W (>53.8 dBm) >1440 W (>61 dBm) <-161
1800/2100 MHz
UMTS Ports
Frequency Range, Full Band (MHz) Insertion Loss (dB) Return Loss Rejection 1800 UL Rejection 1800 DL Average Power Handling Peak Power IM, 2Tx@43dBm (dBc)
1920-2170 0.5 in Rx, 0.3 in Tx >18 >60 >60 >80 W (>49 dBm) >1600 W (>62 dBm) <-161
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Size, WxHxD (without mounting plate) Weight Color Housing RF-connectors Mounting Kit Temperature Range MTBF Safety Ingress Protection IP 65 Environmental 180 x 162 x 61mm (7.1 x 6.3 x 2.4 in) 3.6 kg (7.9 lbs) Off White (NCS 1502-R) Aluminum, IP 65 DIN 7/16 female Hose Clamps in Stainless Steel o o -40 C to +65 C 10 Million Hours EN 60 950 EN 60 529 ETS 300 019
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PNLGP145nn
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Triplexer Fullband
Triplex Filter for 900, 1800 MHz and UMTS with DC Transparency
900/1800/2100 MHz
Powerwave offers a variety of multiband filters for installation in 3G networks. The filters enable re-use of existing feeders in order to reduce cost of new installations and simplifies the process of getting necessary site permissions for the new installations. It is designed for outdoor use and intended for co-siting of base stations to enable sharing of feeder, TMA system and antenna. The unit can be used both at the BTS end for combining frequency bands to a common port and at the antenna end for splitting the frequency bands to separate antennas. The filter has configurable DC transparency and integrated lightning protection on all ports to make it easy using TMAs in the antenna system.
Key Benefits: Compact Design Inbuilt DC Transparency and Subcarrier Support Superior Power Handling Negligible Transmit Band Loss Lightning Protected Full Band
Triplex Filter for 900, 1800 MHz and UMTS with DC Transparency
Triplexer Fullband
900/1800/2100 MHz
Technical Specifications
Product number 900 Port LGP141nn Frequency range, full band (MHz) Insertion Loss (dB) Return Loss (dB) Average Power Handling (dBm) Peak Power (dBm) Intermodulation Products, Max Frequency range,full band (MHz) Insertion loss (dB) Return loss (dB) Average Power Handling Peak Power Intermodulation Products, Max Frequency Range, Full Band (MHz) Insertion Loss (dB) Return Loss (dB) Average Power Handling (dBm) Peak Power (dBm) Intermoducation Products, Max Peak Power Rejection Between Ports (except common) 880-960 <0.2 >20 >200 W (>53) >1600 W (>62) <-116 dBm @2x43 dBm in Tx-band 1710-1880 <0.3 dB in Rx, <0.6 dB in Tx >20 >200 W (>53 dBm) >1600 W (>62 dBm) <-116 dBm @2x43 dBm Tx-band 1920-2170 <0.5 dB in Rx, <0.3 dB in Tx >20 dB >80 W (>-49 dBm) >1600 W (>62 dBm) <-116 dBm @2Tx43 dBm in Tx-band >6400 W (>68 dBm) >50 dB
1800 Port
UMTS Port
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Size, WxHxD (without mounting plate) Weight Color Housing RF-connectors Mounting Kit Temperature Range MTBF Safety Ingress Protection, IP 65 Environmental 169 x 228 x 68mm (6.7 x 9.0 x 2.7 in) <3.0 kg (6.5 lbs) Off White (NCS 1502-R) Aluminum, IP 65 (Option IP 68) DIN 7/16 female Hose Clamps in Stainless Steel o o -40 C to +65 C >10 Million Hours EN 60 950, UL 60 950, ETL EN 60 529 ETS 300 019
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PNLGP141nn
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
890-960 MHz
The Powerwave Co-location filter for GSM900 provides attenuation of 800MHz transmitters in order not to degrade the GSM900 uplink. The unit comes in three different versions depending on carrier allocations. The duplexed design enables external installation on Rx/Tx systems.
Key Benefits: Compact Design Excellent Power Handling Duplexed Design for Rx/Tx
890-915 MHz
Receive
Frequency Range -01 & -02 (MHz) Frequency Range -03 (MHz) Insertion Loss -01 & -03 (dB) Insertion Loss -02 (dB) Return Loss (dB) Frequency Range- 01 & -02 (MHz) Frequency Range -03 (MHz) Insertion Loss (dB) Return Loss (dB) Average Power Handling (dBm) Peak Power (dBm)
890-915 896-915 <1.5 <1.0 >18 935-960 941-960 <0.5 >18 >+53 >+62 >30 >37 >30 -153
Transmit
Rejection:
-01: 869-889 (MHz) -02: 869-888 (MHz) -03: 869-895 (MHz) 2Tx@43dBm (dBc)
Intermodulation
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Size, WxHxD Weight Color Housing RF-connectors Mounting Kit Temperature Range MTBF Ingress Protection 169 x 228 x 68 mm (6.7 x 9.0 x 2.7 in) <3.8 kg (<8.4 lbs) Off White (NCS 1502-R) Aluminum DIN 7/16 female Hose Clamps in Stainless Steel -5 C to +55 C >10 Million Hours IP44
o o
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PNLGP195nn
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Frequency Range:
880-960 / 1710-1880
900/1800 MHz
The Powerwave Band Pass Filter for 900 and 1800 MHz with UMTS rejection is used to suppress wide band noise and spurious signals from GSM systems into the UMTS receiver band. The primary use of the filter is in applications where UMTS is co-located with GSM. The filter can be used when GSM900 and GSM1800 share the same feeder or for either system alone. The filter, transparent to DC and subcarrier, enables use of TMA and RET in the antenna system.
Key Benefits: Compact Design Inbuilt DC Transparency and Subcarrier Support Negligible RF Loss Lightning Protected
900/1800 MHz
Frequency Range (MHz) Insertion Loss (800-960 MHz) (dB) Insertion Loss (1710-1880 MHz) (dB) Return Loss (dB) Rejection UMTS (dB) Average Power Handling (dBm) Peak Power (dBm) IM 2Tx@43dBm (dBc)
880-960 / 1710-1880 <0.2 <0.5 >18 >60 >80 W (>49) >320 W (>55) -161
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Size, WxHxD Weight Color Housing RF-connectors Mounting Kit Temperature Range MTBF Safety Ingress Protection Environmental 255 x 75 x 50mm (10.0 x 3.0 x 2.0 in) <1.4 kg (3.1 lbs) Off White (NCS 1502-R) Aluminum, IP 65 DIN 7/16 female Hose Clamps in Stainless Steel o o -40 C to +65 C >10 Million Hours EN 60 950 EN 60 529 ETS 300 019
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PNLGP164nn
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Full Band
900 MHz
The Powerwave TMA-DD 900 is a full band Tower Mounted Amplifier (TMA) to be installed near the antenna. The deployment of the TMA System will provide enhanced coverage and improved up-link signal quality. Appropriate for new rollouts by optimizing coverage with a reduced number of BTSs or as an upgrade to existing BTSs for enhancing the existing coverage. Full Band TMA facilitates simplified logistics, especially when the frequency bands are scattered. The unit comprises of high Q band-pass filters, dual balanced low noise amplifiers with circuits for active bias, supervision, alarms and lightning protection circuit. The Powerwave patented design with all active components integrated within the filter body provides an extremely reliable, compact and lightweight TMA solution. The vented enclosure design is employed to prevent the effect of condensation, thereby guaranteeing long, reliable, maintenance-free service in all environmental conditions. These TMAs offer an easy to install, maintenance free, cost effective solution for coverage enhancement and increased quality in mobile communication networks.
Key Benefits: Improved Network Quality Increased Coverage State of the Art Performance Excellent Power Handling Low Tx Loss Exceptional Reliability
900 MHz
* Typical All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Size,W x H x D (without mounting plate) Weight Color Housing RF-connectors Mounting kit Temperature range MTBF Safety Ingress protection, IP 65 Environmental EMC 109 x 284 x 127 mm (4.3 x 11.2 x 5.0 in) <5.6 kg (12.3 lbs) Off white (NCS 1502-R) Aluminum DIN 7/16 female. Mounting kit for pole and wall is included. -40 C to +65 C (-40 F to +149 F) >1 million hours EN 60 950 EN 60 529 ETS 300 019 ETS 300 342-3
D031-08214 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
The Powerwave TMA-DD GSM 900 is a extended band Tower Mounted Amplifier (TMA) to be installed near the antenna. Deployed in a GSM, GPRS and EDGE network it will increase capacity and coverage as well as extend the battery life time for the handsets. TMA System will provide enhanced coverage and improved up-link signal quality. Appropriate for new rollouts by optimizing coverage with a reduced number of BTSs or as an upgrade to existing BTSs for enhancing the existing coverage. Extended Band TMA facilitates simplified logistics, especially when the frequency bands are scattered. The unit comprises of high Q band-pass filters, dual balanced low noise amplifiers with circuits for active bias, supervision, alarms and lightning protection circuit. The Powerwave patented design with all active components integrated within the filter body provides an extremely reliable, compact and lightweight TMA solution. The vented enclosure design is employed to prevent the effect of condensation, thereby guaranteeing long, reliable, maintenance-free service in all environmental conditions. These TMAs offer an easy to install, maintenance free, cost effective solution for coverage enhancement and increased quality in mobile communication networks.
Key Benefits: Improved Network Quality Increased Coverage Compact Design State of the Art Performance Excellent Power Handling Low Tx Loss Exceptional Reliability
LGP166nn Frequency range, Extended band (28 MHz) Nominal gain (dB) Return loss* (dB) Noise figure* (dB) Output 3rd order Intercept Point* (dBm) Frequency range,full band (28 MHz) Insertion loss* (dB) Return loss* (dB) 2 Tx@x43 dBm (dBc) Two levels,individually supervised LNAs @12 VDC
887-915 12 > 20 < 1.7 > +23 932-960 < 0.7 > 20 <-158 1.2 W per LNA
* Typical All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Size,W x H x D (without mounting plate) Weight Color Housing RF-connectors Mounting kit Temperature range MTBF Safety Ingress protection, IP 65 Environmental EMC 169 x 228 x 66 mm (6.6 x 9 x 2.6 in) 5.7 kg (12.3 lbs) Off white (NCS 1502-R) Aluminum DIN 7/16 female. Mounting kit for pole and wall is included. -40 to +65 (-40 to +149 C C F F) >1 million hours EN 60 950 EN 60 529 ETS 300 019 ETS 300 342-3
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PNLGP104nn
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
The Powerwave TMA-DD EGSM 900 is a full band Tower Mounted Amplifier (TMA) to be installed near the antenna. Deployed in a GSM, GPRS and EDGE network it will increase capacity and coverage as well as extend the battery life time for the handsets. TMA System will provide enhanced coverage and improved up-link signal quality. Appropriate for new rollouts by optimizing coverage with a reduced number of BTSs or as an upgrade to existing BTSs for enhancing the existing coverage. Full Band TMA facilitates simplified logistics, especially when the frequency bands are scattered. The unit comprises of high Q band-pass filters, dual balanced low noise amplifiers with circuits for active bias, supervision, alarms and lightning protection circuit. The Powerwave patented design with all active components integrated within the filter body provides an extremely reliable, compact and lightweight TMA solution. The vented enclosure design is employed to prevent the effect of condensation, thereby guaranteeing long, reliable, maintenance-free service in all environmental conditions. These TMAs offer an easy to install, maintenance free, cost effective solution for coverage enhancement and increased quality in mobile communication networks.
Key Benefits: Improved Network Quality Increased Coverage Compact Design State of the Art Performance Excellent Power Handling Low Tx Loss Exceptional Reliability
Technical Specifications
Product Number Up-link LGP192nn Frequency range, full band (35 MHz) Nominal gain (dB) Return loss* (dB) Noise figure* (dB) Output 3rd order Intercept Point* (dBm) Frequency range,full band (35 MHz) Insertion loss* (dB) Return loss* (dB) 2 Tx@x43 dBm (dBc) Two levels,individually supervised LNAs @12 VDC 880-915 12 > 20 < 1.7 > +23 925-960 < 0.7 > 20 <-158 1.2 W per LNA
* Typical All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Size,W x H x D (without mounting plate) Weight Color Housing RF-connectors Mounting kit Temperature range MTBF Safety Ingress protection, IP 65 Environmental EMC 169 x 272 x 89 mm (6.6 x 10.7 x 3.5 in) 5.7 kg (12.3 lbs) Off white (NCS 1502-R) Aluminum DIN 7/16 female. Mounting kit for pole and wall is included. -40 to +65 (-40 to +149 C C F F) >1 million hours EN 60 950 EN 60 529 ETS 300 019 ETS 300 342-3
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
PNLGP104nn
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
1800 MHz
The Powerwave Twin TMA-DD 1800 consists of two full band Tower Mounted Amplifiers (TMA) to be installed near the antenna. The Twin contains TMAs for both main and diversity paths and fits perfectly with cross-pole antennas. With a volume of only 2.9 litres it is extremely small and compact. Deployed in a GSM, EDGE, CDMA or WCDMA (CDMA 2000 or UMTS) network it will increase capacity and coverage as well as extend the battery life time for the handsets. Full Band TMA facilitates simplified logistics, especially when the frequency bands are scattered. The unit comprises of high Q band-pass filters, dual balanced low noise amplifiers with circuits for active bias, supervision, alarms and lightning protection circuit. The Powerwave patented design with all active components integrated within the filter body provides an extremely reliable, compact and lightweight TMA solution. The Powerwave unique field proven reliability secures a long maintenance free service in all environmental conditions.
Key Benefits: World Leading Compact Design, two TMAs in One Unit Full Band Design for Scattered Blocks of Frequencies Low Noise Figure for Increased Coverage and Improved Network Quality Low Tx Insertion Loss Exceptional Reliability
1800 MHz
All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08219 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Rev 0.1
Copyright September 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
2100 MHz
D031-08222 Rev A
The new Powerwave Micro Twin 2100 is less than half the size than present conventional designs. With a volume of only 1.4 liters, it is extremely small and compact. It consists of two full band Tower Mounted Amplifiers (TMA) in one housing to be installed near the antenna. The Twin contains TMAs for both the main and diversity branch and fits perfectly with cross-pole antennas. Deployed in a 2100 network it will increase capacity and coverage as well as extend battery-life for handsets. The Micro Twin is AISG compatible with automatic current alarm fall back to support installations with current alarm supervision. Full Band TMA facilitates simplified logistics, especially when the frequency bands are scattered. The unit comprises of high Q band-pass filters, dual balanced low noise amplifiers with circuits for active bias, supervision, alarms and lightning protection circuit. The Powerwave patented design with all active components integrated within the filter body provides an extremely reliable, compact and lightweight TMA solution The Powerwave unique field proven reliability secures a long maintenance-free service in all environmental conditions
Key Benefits: World Leading Compact Design, two TMAs in One Unit Low Noise Figure for Increased Coverage and Improved Network Quality Low Tx Insertion Loss Exceptional Reliability Compatible With Most Node B Systems AISG Compatible Micro Twin Tower Mounted Amplifier Dual Duplex 2100 MHz Full Band
Down-link
2100 MHz
Powerwave is an active member of the 3GPP and Antenna interface Standard Group
*Typical All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Size,W x H x D (without mounting plate) Weight Color RF-connectors Mounting kit Temperature range MTBF Safety Ingress protection, IP 65 and IP 67 Environmental EMC 154 x 192 x 50 mm (6.0 x 7.5 x 2.0 in) <3.5 kg (7.7 lbs) Off white (NCS 1502-R) DIN 7/16 female. Mounting kit for pole and wall is included. -40 C to +65 C >1 million hours (over 100 years) EN 60 950 EN 60 529 ETS 300 019 ETSI 125 113
D031-08222 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright March 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
The Powerwave CIN ID is a Current Injector for indoor use. The CIN is to be mounted indoor close to the base station antenna ports and provides the ability to apply DC power to, and convey alarm conditions from, a Tower Mounted Amplifier via the coaxial feeder cable. It also supports AISG/3GPP data communication. The unit features advanced lightning protection circuits acting as surge protection for the BTS. This eliminates the need for traditional lightning arresters in the BTS. DC supply cables are available in standard lengths with various connectors according to requirements. The broadband design covers 800/900/1800/1900/2100 MHz frequency bands. Standard connector gender configuration is male to the BTS port and female to the antenna port. A version with reversed gender configuration is also available.
Key Benefits: Broadband design Negligible insertion loss Integrated lightning protection Robust design AISG/3GPP compatible
D031-08407 Rev. A
Pg 1 of 2
806-960\1710-2170 MHz
Electrical Specifications
Product number Frequency range (MHz) Return Loss (dB) Insertion Loss* (dB) DC Current, max Intermodulation: @ 2 x 43 dBm TX Carriers (dBc) Temperature range MTBF Safety Ingress Protection, IP54 Environmental Lightning Protection
*Typical
LGP233nn 806-960 and 1710-2170 >20 <0.1 1.5 A <-116 dBm (<-159) -5 C to +55 C (23 F to +131 F) >1 000 000 hours (over 100 years) EN 609 50, UL 609 50, ETL EN 605 29 ETS 300 019 IEC 61312-1
o o o o
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Size, W x H x D (incl. 7/16 connectors) Weight Color Housing RF-connectors DC Supply Connector 87 x 41 x 51 mm (3.4 x 1.6 x 2.0 inch) 0.32 kg (0.71 lbs) Silver plating Zink Alloy DIN 7/16 female and male SMB male
D031-08407 Rev. A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2006, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
The Powerwave CIN OD is a Current Injector for outdoor use. The Current Injector provides the ability to apply DC power to, and convey alarm conditions from, a Tower Mounted Amplifier via the coaxial feeder cable. It also supports AISG / 3GPP data communication. The unit features advanced lightning protection circuits acting as surge protection for the BTS. This eliminates the need for traditional lightning arresters in the BTS. DC supply cables are available in standard lengths with various connectors according to requirements. The broadband design covers 800/900/1800/1900/2100 MHz frequency bands. Standard connector gender configuration is male to the BTS port and female to the antenna port. A version with reversed gender configuration is also available.
Key Benefits: Broadband design Negligible Insertion Loss Integrated Lightning Protection Robust Design AISG/3GPP compatible
D031-08406 Rev. A
Pg 1 of 2
806-960/1710-2170 MHz
Electrical Specifications
Product Number Frequency range, 2 variants (MHz) Return Loss (dB) Insertion Loss* (dB) DC Current, max Intermodulation: @ 2x 43 dBm Tx carriers (dBc) Temperature range MTBF Safety Ingress protection, IP 68 Environmental Lightning Protection LGP213nn 806 - 960MHz and 1710-2170 >20 < 0.1 1.5 A <-116 dBm (<-159) -40 C to +65 C (-40 F to +149 F) >1 000 000 hours EN 609 50, UL 60950, ETL EN 60 529 ETS 300 019 IEC 61312-1
o o o o
*Typical All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
Mechanical Specifications
Size, W x H x D (incl. 7/16 connectors) Weight Color Housing RF-connectors DC-connector 87 x 41 x 51 mm (3.4 x 1.6 x 2.0 in) 0.32 kg (0.71 lbs) Off-white, NCS 1502R Aluminum DIN 7/16 female and male SMA female
D031-08406 Rev. A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2006, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
PDU Lite
The Powerwave Power Distribution Unit (PDU Lite) is intended for indoor use and supplies power to the Tower Mounted Amplifier (TMA) via the Current Injectors. The PDU Lite is a truly modular unit, each module supplying two TMAs. This unit enables TMA installations to be carried out on a per sector basis and can be easily combined to provide solutions for all common site configurations. PDU Lite is available as a stand alone unit or as a 1 to 3 module 19 panel and has isolated input and output ports that can cater to both positive and negative DC supplies.
Key Benefits: Operates regardless of +24 or - 48 VDC Compact design for cramped BTS cabinets Easy upgrade for BTS expansion
Electrical Specifications
Input Voltage Input Current, Max Input Protection and Polarity No. of TMA Output Ports Output Voltage 20-60 V DC, positive or negative 1A Automatic Polarity Agile 2 12 V DC +/- 1 V 375 mA/port Automatic short-circuit protection, auto recovery Low Current/High Current Open Circuit/Short Circuit Sum Alarm Output Port Relay Normally Open and Normally Closed
PDU Lite
All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.
Mechanical Specifications
Size, WxHxD Weight Housing Input Voltage Connector Output Connector Alarm Output Connector Output Voltage Indicator Output Port Current Indicator, One Per Port Temperature Range Humidity MTBF Rack Mounting Kit: Housing Weight No. of Modules Dimensions, 19 Safety Environmental EMC 100 x 20 x 60 mm (3.9 x 0.8 x 2.4 in) 120g (0.3 lbs) Aluminum 3 Pole Connector, Molex 2 x 3 Pole Connector, Molex 3 Pole Connector, Molex Green when OK Green when OK o o o o -40 C to +65 C (-40 F to +149 F) 5-95% RH non condensing >1 000 000 hours (over 100 years) Aluminum 300 g 1.3 1U x 70 mm (1.75 x 2.8 in) EN 60 950, UL 1950 ETS 300 019 ETS 300 342-3
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA PN LGP121nn
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2005, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Single Sector
Single Sector
As a part of Powerwave's CleanSite solutions the Single sector offers a flexible way of integrating products from Powerwave's extensive range of antenna system products in one single radome. The Single sector solution offers maximum sector coverage with minimum visual impact. The Powerwave Clean Site Program integrates a full range of multi-band solutions to make the most of tower space. High-volume production in several countries ensures a rapid delivery. Our products provide design and installation flexibility that answers any needs, such as enabling co-siting of networks and systems, dealing with space and zoning issues limiting the appearance and location of new installations.
Key Benefits: Multi sector coverage Simplified Site Acquisition Less Visual Impact Zoning Simpler/Faster installation and Commissioning Simplified Logistics Improved Quality (products and installation) Reduced Total Cost Guaranteed Performance
Single sector
C T 0 1 2 3 A B C V 0 1 2 E Description No RET 1 RET controlled band 2 RET controlled bands 3 RET controlled bands i-RET (male connector) i-RET (male+female connector) i-RET (male+male) Description No TMA 1 TMA per sector 2 TMA per sector Empty TMA box incl
One Clean Site product instead of several products (Antenna, TMA, RET) with a number of jumper cables makes it much easier to get an approval from land lords and for building permits. This gives a faster time to market and less administrative cost. One Clean Site product to order and install gives simpler logistics and easier installations. Elimination of feeders between TMA and Antenna gives 0.3 to 0.5 dB lower Noise Figure and 0.3 to 0.5 dB less TX loss. This gives increased coverage by minimizing loss of the expensive TX power and improving the Base station sensitivity. This gives an improved quality of service and increased traffic, higher revenue. One Clean Site integrated Antenna TMA RET system (AISG compatible) with factory verified performance guarantees high performance and reduces the risk for poor field made cables and connections. Powerwave Clean Site gives less investment cost and increased revenue.
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Single System
Clean Site
The Powerwave Clean Site Program integrates a full range of multi-band solutions to make the most of tower space. High-volume production in several countries ensures a rapid delivery. Our products provide design and installation flexibility that answers any needs, such as enabling co-siting of networks and systems, dealing with space and zoning issues limiting the appearance and location of new installations.
Key Benefits: Simplified Site Acquisition Less Visual Impact Zoning Simpler/Faster installation and Commissioning Simplified Logistics Improved Quality (products and installation) Reduced Total Cost Guaranteed Performance
D031-08278 Rev A
Pg. 1 of 2
Clean Site
Pg. 2 of 2
D031-08278 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Clean Site Single system configured with Antenna (18dBi) + TMA (variable gain 24-32db) +RE
Dual System
Clean Site
The Powerwave Clean Site Program integrates a full range of multi-band solutions to make the most of tower space. High-volume production in several countries ensures a rapid delivery. Our products provide design and installation flexibility that answers any needs, such as enabling co-siting of networks and systems, dealing with space and zoning issues limiting the appearance and location of new installations.
Key Benefits: Simplified Site Acquisition Less Visual Impact Zoning Simpler/Faster installation and Commissioning Simplified Logistics Improved Quality (products and installation) Reduced Total Cost Guaranteed Performance
D031-08277 Rev A
Pg. 1 of 2
Clean Site
Filter Description TMD 800-900/1800-2100 TMD 800-900/1800-2100 TMD 800-900/1800-2100 TMD 800-900/1800-2100 TMD 1800/UMTS SH TMD 1800/UMTS SL TMD 1800/UMTS D TMD 1800/UMTS X
X D SH SL
Frequency Band DC path 824-960/1710-2170 No DC path 824-960/1710-2170 824-960/1710-2170 824-960/1710-2170 1710-2170 824-960/1710-2170 824-960 1710-1880/1920-2170 1920-2170 1710-1880/1920-2170 1710-1880 1710-1880/1920-2170 1710-1880/1920-2170 1710-1880/1920-2170 No DC path
Number 7020.00
One Clean Site product instead of several products (Antenna, TMA, RET) with a number of jumper cables makes it much easier to get an approval from land lords and for building permits. This gives a faster time to market and less administrative cost. One Clean Site product to order and install gives simpler logistics and easier installations. Elimination of feeders between TMA and Antenna gives 0.3 to 0.5 dB lower Noise Figure and 0.3 to 0.5 dB less TX loss. This gives increased coverage by minimizing loss of the expensive TX power and improving the Base station sensitivity. This gives an improved quality of service and increased traffic, higher revenue. One Clean Site integrated Antenna TMA RET system (AISG compatible) with factory verified performance guarantees high performance and reduces the risk for poor field made cables and connections. Powerwave Clean Site gives less investment cost and increased revenue.
Pg. 2 of 2
D031-08277 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Clean Site Dual system configured with: Dual band antenna (2x18dBI)+ 2xTMA (12dB) + 2xRET (AISG)
Single sector
Electrical performance Frequency Band (MHz) Gain, 0.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation, 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Width (mm) Depth (mm) Weight, unconfigured (kg) Wind Load, Frontal, 150 km/h (N) Color
824-960/1710-2170 14.2/17.5 < 1.5:1 >30 696/637 14.32/6.61 2 -10/0-8 <-110dBm 7750.00
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Single sector
Electrical performance Frequency Band (MHz) Gain, 0.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation, 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Width (mm) Depth (mm) Weight, unconfigured (kg) Wind Load, Frontal, 150 km/h (N) Color
824-960/1710-2170 15.9/17.5 < 1.5:1 >30 696/637 9.21/6.61 2 -9/0-8 <-110dBm 7752.00
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Single sector
Electrical performance Frequency Band (MHz) Gain, 0.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation, 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Width (mm) Depth (mm) Weight, unconfigured (kg) Wind Load, Frontal, 150 km/h (N) Color
824-960/1710-2170 15.9/17.5 < 1.5:1 >30 696/637 9.21/6.61 2 -9/0-8 <-110dBm 7755.00
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Triple Band
Clean Site
The Powerwave Clean Site Program integrates a full range of multi-band solutions to make the most of tower space. High-volume production in several countries ensures a rapid delivery. Our products provide design and installation flexibility that answers any needs, such as enabling co-siting of networks and systems, dealing with space and zoning issues limiting the appearance and location of new installations.
Key Benefits: Simplified Site Acquisition Less Visual Impact Zoning Simpler/Faster installation and Commissioning Simplified Logistics Improved Quality (products and installation) Reduced Total Cost Guaranteed Performance
D031-08279 Rev A
Pg. 1 of 2
Clean Site
TMA Part Number 16720 16721 18607 18608 18507 18508 Filter Part Number 21901 21902 21903 21904 23201 23202 23203 23204 14108 14109 14110
TMA Description 2100 MHz 12dB Gain 2100 MHz VG (23-32) dB Gain 1900 MHz 12 dB Gain 1900 MHz 24 dB Gain 1800 MHz 12 dB Gain 1800 MHz 24 dB Gain Filter Description TMD 800-900/1800-2100 X TMD 800-900/1800-2100 D TMD 800-900/1800-2100 SH TMD 800-900/1800-2100 SL TMD 1800/UMTS SH TMD 1800/UMTS SL TMD 1800/UMTS D TMD 1800/UMTS X TMT UMTS/900/1800 SMH TMT UMTS/900/1800 SSH TMT UMTS/900/1800 SLH
Frequency Band DC path 824-960/1710-2170 No DC path 824-960/1710-2170 824-960/1710-2170 824-960/1710-2170 1710-2170 824-960/1710-2170 824-960 1710-1880/1920-2170 1920-2170 1710-1880/1920-2170 1710-1880 1710-1880/1920-2170 1710-1880/1920-2170 1710-1880/1920-2170 No DC path 824-960/1710-1880/1920-2170 1710-1880 824-960/1710-1880/1920-2170 1920-2170 824-960/1710-1880/1920-2170 824-960
One Clean Site product instead of several products (Antenna, TMA, RET) with a number of jumper cables makes it much easier to get an approval from land lords and for building permits. This gives a faster time to market and less administrative cost. One Clean Site product to order and install gives simpler logistics and easier installations. Elimination of feeders between TMA and Antenna gives 0.3 to 0.5 dB lower Noise Figure and 0.3 to 0.5 dB less TX loss. This gives increased coverage by minimizing loss of the expensive TX power and improving the Base station sensitivity. This gives an improved quality of service and increased traffic, higher revenue. One Clean Site integrated Antenna TMA RET system (AISG compatible) with factory verified performance guarantees high performance and reduces the risk for poor field made cables and connections. Powerwave Clean Site gives less investment cost and increased revenue.
Pg. 2 of 2
D031-08279 Rev A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Clean Site Triple Band system configured with TB Antenna (15dBi) + TMA UMTS (12dB) + TB RET (AISG) + 2xTPX filter
Single sector
Electrical performance Frequency Band (MHz) Gain, 0.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation, 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Width (mm) Depth (mm) Weight, unconfigured (kg) Wind Load, Frontal, 150 km/h (N) Color
824-960/1710-2170/1710-2170 14.5/14.4/14.8 < 1.5:1 >30 685/655/ 625 142/14.1/ 131 2 -12/0-12/ 0 -12 <-110dBm 7780.00
2100MHz
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Single sector
Electrical performance Frequency Band (MHz) Gain, 0.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation, 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Width (mm) Depth (mm) Weight, unconfigured (kg) Wind Load, Frontal, 150 km/h (N) Color
824-960/1710-2170/1710-2170 16.5/16.5/16.8 < 1.5:1 >30 67/65/ 64 91/101/ 91 2 -9/0-10/ 0 -10 <-110dBm 7782.00
2100MHz
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Single sector
Electrical performance Frequency Band (MHz) Gain, 0.5dB (dBi) System VSWR Isolation between inputs (dB) Horizontal beamwidth Vertical beamwidth Electrical tilt range Inter modulation, 2x+43dBm Radiation pattern Physical Dimensions Height (mm) Width (mm) Depth (mm) Weight, unconfigured (kg) Wind Load, Frontal, 150 km/h (N) Color
824-960/1710-2170/1710-2170 17.4/17.2/17.5 < 1.5:1 >30 65/65/ 62 7/7/6 2 -8/0-8/ 0 -8 <-110dBm 7785.00
2100MHz
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
MonoPole
As a part of Powerwaves CleanSite solutions the MonoPole offers a flexible way of integrating multi sector solutions in one single radome. MonoPole is the mounting solution to use when more than one sector is covered from a single location. The MonoPole solution offers maximum sector coverage with minimum visual impact. The Powerwave Clean Site Program integrates a full range of multi-band solutions to make the most of tower space. High-volume production in several countries ensures a rapid delivery. Our products provide design and installation flexibility that answers any needs, such as enabling co-siting of networks and systems, dealing with space and zoning issues limiting the appearance and location of new installations.
Key Benefits: Multi sector coverage Simplified Site Acquisition Less Visual Impact Zoning Simpler/Faster installation and Commissioning Simplified Logistics Improved Quality (products and installation) Reduced Total Cost Guaranteed Performance
MonoPole
T U V X YZ
C T 0 1 2 3 A B C V 0 1 2 E Description No RET 1 RET controlled band 2 RET controlled bands 3 RET controlled bands i-RET (male connector) i-RET (male+female connector) i-RET (male+male) Description No TMA 1 TMA per sector 2 TMA per sector Empty TMA box incl
One Clean Site product instead of several products (Antenna, TMA, RET) with a number of jumper cables makes it much easier to get an approval from land lords and for building permits. This gives a faster time to market and less administrative cost. One Clean Site product to order and install gives simpler logistics and easier installations. Elimination of feeders between TMA and Antenna gives 0.3 to 0.5 dB lower Noise Figure and 0.3 to 0.5 dB less TX loss. This gives increased coverage by minimizing loss of the expensive TX power and improving the Base station sensitivity. This gives an improved quality of service and increased traffic, higher revenue. One Clean Site integrated Antenna TMA RET system (AISG compatible) with factory verified performance guarantees high performance and reduces the risk for poor field made cables and connections. Powerwave Clean Site gives less investment cost and increased revenue.
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
For additional antenna data, please check the 7721.06 data sheet
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
824-960/1710-2170 14.2/17.5 < 1.5:1 >30 696/637 14.32/6.61 2 -10/0-8 <-110dBm 7750.00
Accessories Extension tube, 2m Wire sustaining ring TMA/Filter mounting tube, 0.5m Cable inlet Roof adapter Lightning Pole Door kit, Antenna Door kit, 1 box Door kit, 1 box+antenna Door kit, 2 boxes+antenna Cable kit, dual band Cable kit, triple band Cable kit, Ant-TMA Cable fixation plate
ACS01 ACS02 ACS03 ACS04 ACS05 ACS06 ACS07.1 ACS07.2 ACS07.3 ACS07.4 ACS10 ACS11 ACS12 ACS20
PNCleanSiteTripleSystem
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
824-960/1710-2170 15.9/17.5 < 1.5:1 >30 696/637 9.21/6.61 2 -9/0-8 <-110dBm 7752.00
Accessories Extension tube, 2m Wire sustaining ring TMA/Filter mounting tube, 0.5m Cable inlet Roof adapter Lightning Pole Door kit, Antenna Door kit, 1 box Door kit, 1 box+antenna Door kit, 2 boxes+antenna Cable kit, dual band Cable kit, triple band Cable kit, Ant-TMA Cable fixation plate
ACS01 ACS02 ACS03 ACS04 ACS05 ACS06 ACS07.1 ACS07.2 ACS07.3 ACS07.4 ACS10 ACS11 ACS12 ACS20
PNCleanSiteTripleSystem
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
824-960/1710-2170 15.9/17.5 < 1.5:1 >30 696/637 9.21/6.61 2 -9/0-8 <-110dBm 7755.00
Accessories Extension tube, 2m Wire sustaining ring TMA/Filter mounting tube, 0.5m Cable inlet Roof adapter Lightning Pole Door kit, Antenna Door kit, 1 box Door kit, 1 box+antenna Door kit, 2 boxes+antenna Cable kit, dual band Cable kit, triple band Cable kit, Ant-TMA Cable fixation plate
ACS01 ACS02 ACS03 ACS04 ACS05 ACS06 ACS07.1 ACS07.2 ACS07.3 ACS07.4 ACS10 ACS11 ACS12 ACS20
PNCleanSiteTripleSystem
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
824-960/1710-2170/1710-2170 14.5/14.4/14.8 < 1.5:1 >30 685/655/ 625 142/14.1/ 131 2 -12/0-12/ 0 -12 <-110dBm 7780.00
Accessories Extension tube, 2m Wire sustaining ring TMA/Filter mounting tube, 0.5m Cable inlet Roof adapter Lightning Pole Door kit, Antenna Door kit, 1 box Door kit, 1 box+antenna Door kit, 2 boxes+antenna Cable kit, dual band Cable kit, triple band Cable kit, Ant-TMA Cable fixation plate
ACS01 ACS02 ACS03 ACS04 ACS05 ACS06 ACS07.1 ACS07.2 ACS07.3 ACS07.4 ACS10 ACS11 ACS12 ACS20
PNCleanSiteTripleSystem
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
824-960/1710-2170/1710-2170 16.5/16.5/16.8 < 1.5:1 >30 67/65/ 64 91/101/ 91 2 -9/0-10/ 0 -10 <-110dBm 7782.00
Accessories Extension tube, 2m Wire sustaining ring TMA/Filter mounting tube, 0.5m Cable inlet Roof adapter Lightning Pole Door kit, Antenna Door kit, 1 box Door kit, 1 box+antenna Door kit, 2 boxes+antenna Cable kit, dual band Cable kit, triple band Cable kit, Ant-TMA Cable fixation plate
ACS01 ACS02 ACS03 ACS04 ACS05 ACS06 ACS07.1 ACS07.2 ACS07.3 ACS07.4 ACS10 ACS11 ACS12 ACS20
PNCleanSiteTripleSystem
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
824-960/1710-2170/1710-2170 17.4/17.2/17.5 < 1.5:1 >30 65/65/ 62 7/7/6 2 -8/0-8/ 0 -8 <-110dBm 7785.00
Accessories Extension tube, 2m Wire sustaining ring TMA/Filter mounting tube, 0.5m Cable inlet Roof adapter Lightning Pole Door kit, Antenna Door kit, 1 box Door kit, 1 box+antenna Door kit, 2 boxes+antenna Cable kit, dual band Cable kit, triple band Cable kit, Ant-TMA Cable fixation plate
ACS01 ACS02 ACS03 ACS04 ACS05 ACS06 ACS07.1 ACS07.2 ACS07.3 ACS07.4 ACS10 ACS11 ACS12 ACS20
PNCleanSiteTripleSystem
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
Physical Dimensions Height (mm) Side length (mm) Weight (kg) Color
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
2500 Metal
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Cable inlet
Product Number Supports MonoPole with 340 and 500 Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Color ACS04
MonoPole
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Roof Adapter
Product Number ACS05
MonoPole
Color
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
1m Extension
Product Number Supports MonoPole with 340 Height of steps (mm) Physical Dimensions Height (mm) Diameter (mm) Weight (kg) Color 250 ACS52
MonoPole
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Hinge kit
Product Number Supports MonoPole with 340 ACS54
MonoPole
RAL 7035
Removable hinge kit for MonoPole installations. Can be used during installation for simplified raise of MonoPole.
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Adapter plate
Product Number Supports MonoPole with 340 Thickness (mm) Diameter (mm) 12 496 ACS55
MonoPole
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Cable kit
Product Number Supports MonoPole with 340 No. of cables Cable type Length (mm) 6 ACS56
MonoPole
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
MonoPole
No. of brackets Weight (kg) Width (mm) Height (mm) Width (mm) Mounting hard ware for TMAs included
3 145 410 2
PNCleanSiteTripleSystem
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Hong Kong Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2003, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
Antenna Brackets
Tilt Bracket Kit
All Powerwave antennas shorter than 1.5 meter (5 feet)* shall be installed with Powerwave tilt bracket, 7456.00. Below is a list outlining which antennas come with pre-mounted tilt brackets. For a reference list of accessory products see mechanical specification on page 2.
*Urban antennas longer than 1.5 meter with three brackets use 7456.00
Part Number 7720.x0/7721.x0/7722.x0/7735.x0A/7740.x0A/7745.x0A 7225.0x/7226.0x/7227.0x/7228.0x/7230.0x/7231.0x/72320x/7233.0x/ 7270.0x/ 7271.0x/ 7272.0x/ 7273.0x/ 7275.0x/ 7276.0x/ 7277.0x/ 7278.0x 7216.0x/7217.0x/7218.0x/7255.0x/7263.0x/7281.0x/7282.0x 7182.xx/7183.xx/7184.xx/7185.xx/7194.xx/7195.xx/7198.xx/7199.xx/ 7200.xx/7221.xx 7337.0x/7338.0x/7339.0x
Key Benefits: Robust and reliable design Accessory products available Easy to install Pre mounted on antennas
Antenna Brackets
70 35 26 10,4 8,4 36 29 40-400
Top view
160 136 25-125 200 15 245
Mechanical Specifications
Dimensions, HxWxD Weight Mat erial See drawing 3,6 kg/ 7,9 lbs Galvanized st eel, st ainless screws & nut s
Tilt angle 40,0 35,0 30,0 25,0 20,0 15,0 10,0 5,0 0,0
36 29
70
10,4 8,4
45
24
Packing Size, HxWxD HxWxD Shipping Weight Tilt range Pole dimension Accessory product s 4,0 kg/ 8,8 lbs See diagram 25-125mm Panning Kit 2201.11/ Big Pole Clamp 7458.00 / Flush wall, pole clamp 7455.00
All brackets fulfill the requirements stated in the standards below. Antennas are tested together with their corresponding brackets. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11, test Ka, 35C, 48h, 5% salt.
D031-08419 Rev. A Pg. 2 of 2 Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2006, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
Antenna Brackets
Heavy Duty Tilt Bracket Kit
All Powerwave antennas larger than 1.5 meters (5 feet) shall be installed with a Powerwave heavy-duty bracket, product number 7256.00. Please refer to list Family below for antennas that have with pre-mounted heavy duty brackets.
Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas Part Number
747x.xx 748x.xx 776x.xx 775x.xx 777x.xx 778x.x0 7804.00/7824.00/7834.00/7838.00 7143.xx.xx.xx/7144.xx.xx.xx/7145.xx.xx.xx 7218.1x 7227.1x 7840.x0/7850.x0/7329.0x/7330.0x/ 7331.0x/7332.0x/7333.0x/7334.0x All antennas except .90 are shipped with pre-mounted brackets.
Key Benefits: Robust and reliable design Accessory products available Easy to install Pre mounted on antennas
Antenna Brackets
90 70 49 10,5 82-440
49 40
Top view
243 186 143,5
90 70
10,5 49 40
Mechanical Specifications
Dimensions, HxWxD Weight Mat erial See drawing 5,5kg/ 12.1lbs Galvanized st eel, st ainless screws & nut s
29
82
Tilt angles for different antenna lengths with 7256.00 brackets 20,0 Tilt angle 15,0 10,0 5,0 0,0 1 2 3 4 5 6 7 8 9 1011121314151617181920212223242526 Index No. on bracket 1,3m 2,0m 2,6m
Packing Size, HxWxD HxWxD Shipping Weight Tilt range Pole dimension Panning range Accessory product s 5,9kg/ 13 lbs See diagram 25-125mm N/ A Heavy Dut y Bracket Panning Kit 2210.10
All brackets fulfill the requirements stated in the standards below. Antennas are tested together with their corresponding brackets. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11, test Ka, 35C, 48h, 5% salt.
D031-08416 Rev. A Pg. 2 of 2 Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright February 2006, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
200
25-125
4168.11.33.00
Antenna Brackets
Large pole mounting adapter
Powerwave large pole mounting adapter is to be used with Powerwave antennas shorter than 1.5 meter/5 feet, see table below.
Part Number 7720.x0/7721.x0/7722.x0/7735.x0A/7740.x0A/7745.x0A 7225.0x/7226.0x/7227.0x/7228.0x/7230.0x/7231.0x/72320x/7233.0x/ 7270.0x/ 7271.0x/ 7272.0x/ 7273.0x/ 7275.0x/ 7276.0x/ 7277.0x/ 7278.0x 7216.0x/7217.0x/7218.0x/7255.0x/7263.0x/7281.0x/7282.0x 7182.xx/7183.xx/7184.xx/7185.xx/7194.xx/7195.xx/7198.xx/7199.xx/ 7200.xx/7221.xx 7337.0x/7338.0x/7339.0x
Antenna Brackets
300 205 1 44 76 72
O 1 8
O 1 4
M 21 ax 5
345 306
320,5
Mechanical Specifications
Dimensions, HxWxD Weight Mat erial See drawing 9,5 kg/ 20,9 lbs Galvanized st eel, st ainless scr ews & nut s
All brackets fulfill the requirements stated in the standards below. Antennas are tested together with their corresponding brackets. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11, test Ka, 35C, 48h, 5% salt.
Packing Size, HxWxD 200x200x20 (mm) Shipping Weight Pole dimension Accessory pr oduct s 10 kg/ 22 lbs Max 215 / mm78.5" To be used wit h ant enna t ilt bracket s 7456.00A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2006, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
Antenna Brackets
Triple Mount Bracket
The Powerwave Triple Mount Bracket allows the mounting of three antennas on a single support for a sturdy and elegant installation. The Triple Mount Bracket permits independent mechanical and electrical tilting of each sector, offering unparalleled versatility. Antennas may be used with their standard mounting hardware, with or without mechanical tilt. The Model 7454.00 Triple Mount Bracket is compatible with all directional Powerwave panel antennas up to 370 mm/14.5 width. Antennas shorter than 1.5m/5 feet can use the full tilt range of the 7456.00A antenna tilt bracket.
Key Features/Benefits:
D031-08417 Rev. A Pg. 1 of 2
Compatible with several antenna models Rugged design and construction Visually appealing Precise alignment of sector boundaries Easy to install Any length antenna Perfect for stealth installations Can be used with standard tilt brackets, 7456.00A, included on antennas
Antenna Brackets
115 71 64 9 19,5
Top view
Side view
110 83
Max width for tube dim: 75 mm = X max 300 mm 114 mm = X max 370 mm
9 12 64 71
19
Mechanical Specifications
Dimensions, HxWxD Weight Material Tilt range Pole dimension Panning range Accessory products See drawing 6.8 kg/1 lbs 5 Steel See diagram. Only antennas < 1.5 m/ 5 feet 75-1 4 mm 1 N/A Can be used with antenna tilt brackets 7456.00A
Tilt angle
40,0 35,0 30,0 25,0 20,0 15,0 10,0 5,0 0,0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Index No. on bracket 0,7m 1,3m
The design and the design calculations are based on Swedish Standards as follows: Swedish building rules, BBR (last edition 1999) Swedish design rules, BKR (last edition 1999) Handbook for steel structures, BSK (last edition 99) Handbook for snow and wind loadings, BSV (last edition 97:2)
D031-08417 Rev. A Pg. 2 of 2 Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Copyright 2006, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
Antenna Brackets
Wall and Panning Kit
All Powerwave antennas shorter than 1.5 meter (5 feet) can be installed with the Powerwave wall and panning kit, 2201.11. Below is a list outlining which antennas which can use this wall and panning kit.
Part Number 7720.x0/7721.x0/7722.x0/7735.x0A/7740.x0A/7745.x0A 7225.0x/7226.0x/7227.0x/7228.0x/7230.0x/7231.0x/72320x/7233.0x/ 7270.0x/ 7271.0x/ 7272.0x/ 7273.0x/ 7275.0x/ 7276.0x/ 7277.0x/ 7278.0x 7216.0x/7217.0x/7218.0x/7255.0x/7263.0x/7281.0x/7282.0x 7182.xx/7183.xx/7184.xx/7185.xx/7194.xx/7195.xx/7198.xx/7199.xx/ 7200.xx/7221.xx 7337.0x/7338.0x/7339.0x
Key Benefits: Robust and reliable design Easy to install Easy to operate
D031-08414 Rev. A Pg 1 of 2
Antenna Brackets
5-5 5
A pprox.1 00
Mechanical Specifications
Dimensions, HxWxD Weight Mat er ial See dr awing 0,3 kg/ 0,7 lbs Galvanized st eel, st ainless screws & nut s
Tilt angle 40,0 35,0 30,0 25,0 20,0 15,0 10,0 5,0 0,0
Packing Size, HxWxD 200x200x20 (mm) Shipping Weight Tilt r ange Pole dimension Panning range Accessory pr oduct s 0,3 kg/ 0,7 lbs See diagram N/ A 5- 55 To be used wit h ant enna t ilt br acket s 7456.00A
All brackets fulfill the requirements stated in the standards below. Antennas are tested together with their corresponding brackets. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11, test Ka, 35C, 48h, 5% salt.
D031-08414 Rev. A Pg 2 of 2 Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2006, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
45 55
35
25 15
55
4168.11.33.00
Antenna Brackets
Wall and Panning Kit
All Powerwave antennas with heavy duty bracket 7256.00 can be installed with Powerwave wall and panning kit, 2210.10. Below is a list outlining which antennas must use the 2210.10 wall and panning kit.
Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas Part Number
747x.xx 748x.xx 776x.x0 775x.x0 777x.x0 778x.x0 7804.00/7824.00/7834.00/7838.00 7143.xx.xx.xx/7144.xx.xx.xx/7145.xx.xx.xx 7218.1x 7227.1x 7840.x0/7850.x0/7329.0x/7330.0x/ 7331.0x/7332.0x/7333.0x/7334.0x All antennas except .90 are shipped with pre-mounted brackets.
Key Benefits: Robust and reliable design Easy to install Easy to operate
Antenna Brackets
Approx. 135
1055
50
Mechanical Specifications
Dimensions, HxWxD Weight Mat er ial See drawing 1,0 kg/ 2,2lbs Galvanized st eel, st ainless scr ews & nut s
Tilt angles for different antenna lengths with 7256.00 brackets 20,0 Tilt angle 15,0 10,0 5,0 0,0 1 2 3 4 5 6 7 8 9 1011121314151617181920212223242526 Index No. on bracket 1,3m 2,0m 2,6m
Packing Size, HxWxD 200x200x20 (mm) Shipping Weight Tilt r ange Panning range Accessory product s 1kg/ 2.2 lbs See diagram 10-55 To be used wit h ant enna t ilt bracket s 7256.00
All brackets fulfill the requirements stated in the standards below. Antennas are tested together with their corresponding brackets. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11, test Ka, 35C, 48h, 5% salt.
D031-08415 Rev. A Pg. 2 of 2 Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40 Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2006, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
4168.11.33.00
Antenna Brackets
Flush wall/pole hose clamp
Powerwave hose clamp is to be used with Powerwave antennas shorter than 1.5 meter / 5 feet, see table below.
Part Number 7720.x0/7721.x0/7722.x0/7735.x0A/7740.x0A/7745.x0A 7225.0x/7226.0x/7227.0x/7228.0x/7230.0x/7231.0x/72320x/7233.0x/ 7270.0x/ 7271.0x/ 7272.0x/ 7273.0x/ 7275.0x/ 7276.0x/ 7277.0x/ 7278.0x 7216.0x/7217.0x/7218.0x/7255.0x/7263.0x/7281.0x/7282.0x 7182.xx/7183.xx/7184.xx/7185.xx/7194.xx/7195.xx/7198.xx/7199.xx/ 7200.xx/7221.xx 7337.0x/7338.0x/7339.0x
Antenna Brackets
104 45 10,5
8,5 70 3
Mechanical Specifications
Dimensions, HxWxD Weight Mat er ial See dr awing 0,4 kg/ 0,9 lbs Galvanized st eel, st ainless screws & nut s
Packing Size, HxWxD 200x200x20 (mm) Shipping Weight Tilt r ange Pole dimension Panning r ange Accessory pr oduct s 0,4 kg/ 0,9 lbs N/ A 40-100 mm/ 1.57"- 3.9" N/ A To be used wit h ant enna t ilt br acket s 7456.00A
Corporate Headquarters Powerwave Technologies, Inc. 1801 East St. Andrew Place Santa Ana, CA 92705 USA
Main European Office Antennvgen 6 SE-187 80 Tby Sweden Tel: +46 8 540 822 00 Fax: +46 8 540 823 40
Main Asia-Pacific Office 23 F Tai Yau Building 181 Johnston Road Wanchai, Hong Kong Tel: +852 2512 6123 Fax: +852 2575 4860
Copyright 2006, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
70
All brackets fulfill the requirements stated in the standards below. Antennas are tested together with their corresponding brackets. Random Vibration: IEC 60068-2-64 Sinus Vibration: IEC 60028-2-6 Salt Mist: IEC 68-2-11, test Ka, 35C, 48h, 5% salt.
4168
Product Index
Antennas RET
7488.06 7700.00 7700.06 7701.00 7701.02 7701.06 7720.x0 7721.x0 7721.10 7722.x0 7735.x0 7740.x0 7745.x0 7750.x0 7752.x0 7755.x0 7760.x0 7762.x0 7765.x0 7766.x0 7780.00 7782.00 7785.00 7804.00R2A 7010.00 7020.00 7030.00 7070.xx 7060.00 7060.10
Filters
9215.01 LGP141nn LGP144nn LGP145nn LGP164nn LGP195nn LGP219nn
4168.11.33.00 4168.11.33.02 4168.11.33.03 4168.11.33.06 4168.11.33.52 7216.03 7217.03 7217.04 7217.11 7218.13 7218.14 7218.15 7218.19 7226.03 7226.04 7227.03 7227.04 7227.06 7228.13 7228.14 7228.16 7228.18 7230.04 7231.04 7231.06 7232.04 7232.07
7233.14 7233.16 7233.18 7255.03 7255.04 7263.01 7263.04 7270.02 7271.02 7271.03 7272.02 7273.02 7273.03 7276.02 7277.02 7278.02 7281.02 7281.04 7282.03 7329.00 7329.06 7330.00 7330.02 7330.04 7330.06 7331.00 7331.02
7331.04 7331.06 7336.00 7336.10 7471.00 7472.00 7473.00 7476.00 7476.02 7476.06 7477.00 7477.02 7477.06 7478.00 7478.02 7478.06 7481.00 7482.00 7483.00 7486.00 7486.02 7486.06 7487.00 7487.02 7487.06 7488.00 7488.02
TMA
LGP104nn LGP121nn LGP132nn LGP136nn LGP138nn LGP167nn LGP185nn LGP166nn LGP192nn LGP215nn
Clean Site
Single System Dual System Triple System