Académique Documents
Professionnel Documents
Culture Documents
This document provides a list of commonly encountered error codes and error messages provided by the web services API. This document provides a reference to error codes but does not replace the typical troubleshooting process if an error is encountered. It serves to provide the application integrator guidance on the nature of the error message encountered; however, if the error or issue persists, please contact customer care to address your needs.
Message Text Warning : The Object manager has detected that personalization events might be causing a recursion, which might crash the system. To further debug the personalization events, create and analyze the personalization log. See personalization documentation fo Integration component '%1' does not have a field xml root. Make sure there is at least one field that has no XML Parent Field XML parent field '%1' for field '%2' is not found in the definition of integration component '%3' Login user must have a system tenant id. There is some problems with the configuration of the adapter service. %1 Invalid document export file format '%1'! The query export file format should be 'HTML' . The external application returned an error status without status-code. BusComps configured on external data sources through XML cannot be used for complex queries! The BusComp user property DLL value is invalid. Unable to load DLL '%1'. Set the DLL property to the path of the XML external DLL to be used. Unable to get service: %1 The external source for this BusComp returned an error: '%1'. Invalid input PropertySet is passed to '%1' business service for '%2' method. Invalid '%1' in search specification '%2'. Invalid search specification '%1'. The external application returned an invalid Siebel XML for '%1' method.
Error Message #
Error Code
100 SBL-DAT-00100
103 SBL-DAT-00103
DAT
104 SBL-DAT-00104
DAT
EAI EAI
4,360 SBL-EAI-04360
EAI
4,359 SBL-EAI-04359 4,361 SBL-EAI-04361 4,362 SBL-EAI-04362 4,363 SBL-EAI-04363 4,364 SBL-EAI-04364 4,365 SBL-EAI-04365
1 of 117
Message Text The specified DLL does not contain the entry point '%1'. Please specify a DLL which supports the defined entry point for this external data source through XML. The 'Service Name' User Property is not defined in the virtual BusComp '%1'. The 'Transport' Service Parameter is not defined in the User Property of the BusComp '%1'. The external source for this BusComp does not support the field '%1'. Please notify your system administrator. General named searches are not supported by BusComps configured on XML external data sources. '%1' query node is not supported in '%2'. The expected return XML document was '%1', but document '%2' was found instead! The external XML interface underlying this BusComp failed to return the information necessary for the operation. Please contact your system administrator. Key '%1' in integration component '%2' references a non-existing field '%3' Key '%1' for integration component '%2' doesn't contain any key fields Unable to initialize the extension language script state for a Business Service! The scripting language subsystem is not correctly initialized. Please contact your system administrator. Conversion failed for '%1' of component '%2' Transcode Conversion Failure Invalid source/target codepage '%1' Invalid input variant type '%1', expected '%2' JS \nError : Key index out of bound.\n \nError: The key cache is empty.\n The value entered for '%1' does not meet the validation rules set by your company administrator. The validation condition is '%2'.
Error Message #
Error Code
4,366 SBL-EAI-04366
EAI EAI
4,369 SBL-EAI-04369
EAI
4,370 SBL-EAI-04370
EAI
EAI EAI
4,445 SBL-EAI-04445 4,419 SBL-EAI-04419 4,420 SBL-EAI-04420 4,446 SBL-EAI-04446 50,001 SBL-DAT-50001 111 SBL-DAT-00111 112 SBL-DAT-00112 56,809 SBL-DAT-56809
2 of 117
Message Text The value entered for '%1' does not meet the validation rules set by your company administrator. %2 Business Component "%1" is not a Domain Entity Business Feature "%1" does not exist for Business Object "%2" Business Object "%1" is not a Domain Entity Integration Object "%1" is not a Domain Entity Personalization has been disabled in the configuration file! No events registered. No user profile attributes need saving. No rows match the search criteria.
Error Message #
Error Code
56,810 SBL-DAT-56810
49,006 SBL-DAT-49006 49,007 SBL-DAT-49007 49,007 SBL-DAT-49007 49,008 SBL-DAT-49008 115 SBL-DAT-00115
No rule sets associated with applets on this BusComp. Error occurred while compressing file '%1'. Unable to load licensed options configuration. Please contact your systems administrator. Required in/out argument '%1' not supplied for '%2' method in Business Service '%3' Required in argument '%1' not supplied for '%2' method in Business Service '%3' Required out argument '%1' not supplied for '%2' method in Business Service '%3' Error: (error error code %d, 0x%X) The ExcludeChannel() function requires a valid channel name. The PRE() function requires a valid field name. Field '%1' not found in BusComp '%2'. Invalid buffer to read/write BLOB data. Invalid ASCII encoding for BLOB data (expect base64 encoding). BLOB data too long for SQL storage. ASCII encoding for BLOB data truncated!
119 SBL-DAT-00119
DAT
DAT DAT
130 SBL-DAT-00130 4,443 SBL-DAT-04443 4,444 SBL-DAT-04444 135 SBL-DAT-00135 136 SBL-DAT-00136 137 SBL-DAT-00137 138 SBL-DAT-00138 139 SBL-DAT-00139
3 of 117
Message Text Unable to lookup message. Message Category '%1' is undefined. Unable to lookup message. Message '%1' of Category '%2' is undefined. '%1' does not have the required initialization function. '%1' not found. Please specify a valid DLL filename for the configuration. '%1' not found. Please specify a valid executable filename that should be started to handle the configuration. '%1' already exists, Overwrite (Yes/No) ? Unable to create the synchronization event for Configurator. The process '%1' has terminated without calling ConfiguratorDone() method. The current configuration operation will be ignored.
Error Message #
Error Code
133 SBL-DAT-00133 134 SBL-DAT-00134 146 SBL-DAT-00146 147 SBL-DAT-00147 148 SBL-DAT-00148
Unknown error occurred. User has canceled the configuration operation. Compile-specific SRF information invalid. Could not create repository file '%1'. File may be in use by another process. Could not open repository file '%1'. File does not exist or may be in use by another process. An internal error occurred accessing the repository file Could not find '%1' named '%2'. This object is inactive or nonexistent. SRF file version mismatch. The SRF file specified is not compatible with this version of the application. Reading .cfg file from %s. The .EXE file is invalid (non-Win32 .EXE or error in .EXE image) Could not launch the application for file '%1'. There has been a DDE transaction failure. The file '%1' was not found. There is no association for files of type '%1'. Out of memory for launching application. There has been a sharing violation on file '%1'. Please check that the file is not already in use.
142 SBL-DAT-00142
DAT
50,381 SBL-DAT-50381 154 SBL-DAT-00154 155 SBL-DAT-00155 156 SBL-DAT-00156 157 SBL-DAT-00157 158 SBL-DAT-00158 159 SBL-DAT-00159 160 SBL-DAT-00160
4 of 117
Message Text Another user of this campaign has already created an opportunity for the selected contact. If you would like access to this opportunity, please contact your manager or the systems administrator. Internal Error in Siebel Corba Interface. Please contact your systems administrator. Unable to allocate memory for temporary CORBA structure! The Corba method was called with an invalid argument when an Applet object was expected. The Corba method was called with an invalid argument when a Control object was expected. The SiebelDataServer was unable to load the configuration file. The Corba method was called with an invalid argument when a String was expected. The CORBA method was called with an invalid argument when a string or an array of strings was expected. The SiebelDataServer was unable to login. The DLL '%1' could not be loaded. A license key for this software has expired. Please enter a new key to proceed, or contact your system administrator. No valid license keys were found in the database. Please enter a license key in the following dialog, or contact your systems administrator. An invalid key was entered. Please verify and try again. A license key was found for an older version of the software. Please enter a new key to proceed, or contact your system administrator. Database connection was lost, please retry. The path '%1' does not exist or is not a directory. If the problem persists, please contact your systems administrator. FireEventHandler failed.
Error Message #
Error Code
161 SBL-DAT-00161
165 SBL-DAT-00165
DAT
172 SBL-DAT-00172
DAT
173 SBL-DAT-00173
DAT
174 SBL-DAT-00174
DAT
DAT DAT
177 SBL-DAT-00177
DAT
5 of 117
Message Text '%1' is not a valid value for the Data Type of argument '%2', Business Service method '%3'. Please ask your systems administrator to check your application configuration if the problem persists. '%1' is not a valid value for the Storage Type of argument '%2', Business Service method '%3'. Please ask your systems administrator to check your application configuration if the problem persists. '%1' is not a valid value for the Type of argument '%2', Business Service method '%3'. Please ask your systems administrator to check your application configuration if the problem persists. The Locale Code is invalid. Please check the value of the parameter LocaleCode for this component. A row corresponding to the Locale Code must exist in the S_LOCALE table. Invalid login position id '%1'. Invalid login position index. Invalid login position name '%1'. Entered login name, password or database credentials are longer than the maximum of 100 characters allowed. The preferences for Siebel Search are invalid. Please Reset them. The 'SearchConnectString' property needs to be defined in the model definition in the configuration file. For Fulcrum, this represents the ODBC source used to connect to the Search Data. For Verity, it represents the fully qualified pathname to the Coll The 'SearchDLL' property needs to be defined in the model definition in the configuration file. This corresponds to the DLL that contains the Search Vendor's API.
Error Message #
Error Code
182 SBL-DAT-00182
183 SBL-DAT-00183
DAT
184 SBL-DAT-00184
DAT
178 SBL-DAT-00178
DAT
DAT DAT
189 SBL-DAT-00189
DAT
6 of 117
Message Text The 'SearchDefName' property needs to be defined in the model definition in the configuration file. This corresponds to the Name of the Search Definition as defined in the Repository. WaitForServiceEvent failed: no FireEventHandler. System preference '%1' is not defined. Unable to find the definition of Business Service '%1' in either the repository or run-time tables. Please ask your systems administrator to check your application configuration if the problem persists. Runtime Event handler cancelled the current operation. WaitForServiceEvent failed: some one else is waiting for the same event '%1'. When the Use Primary Join property is set to TRUE, Primary Id Field is a required field. Please enter a value in the Primary Id Field property or set the Use Primary Join property to FALSE. Invalid font attribute '%1'. Invalid font bold/italic attribute in font specification. The last font attribute should be one of "normal", "bold", "italic" or "bold italic". Unknown font name '%1'. Invalid font name in font specification. Unable to parse font specification '%1'. The format should be the font name, point size and bold/italic attribute separated by dashes. For example: Arial-10-normal or Arial-10-bold italic Invalid font size '%1'. Invalid font size in font specification. The font must be an integer point size. Invalid name for log file! Unable to lock log file! Unable to create log file '%1'! Log not open! Unable to write to log file! FireServiceEvent failed: no one is waiting for event '%1'. Access denied. Access Object '%1' does not have type 'Top', and therefore cannot be used as a parent.
Error Message #
Error Code
188 SBL-DAT-00188
195 SBL-DAT-00195
DAT
DAT DAT
198 SBL-DAT-00198
DAT
199 SBL-DAT-00199 200 SBL-DAT-00200 201 SBL-DAT-00201 202 SBL-DAT-00202 203 SBL-DAT-00203 205 SBL-DAT-00205 542 SBL-DAT-00542 557 SBL-DAT-00557
7 of 117
Message Text Access Object '%1' not found. Unable to determine the Access Object for Business Component '%1'. Access Object '%1' has type 'Top', and therefore cannot be used as a child. Access Object '%1' has unrecognized type '%2'. Unable to acquire lock due to internal error. Error occurred while changing the selected row. Please apply your updates again. This operation is not allowed when there are no records displayed. Please execute a query that returns at least one record or add a new record. Error associating row. Please try your association again. An error has occurred associating the current row. Please try again. An internal error has occurred where the association list is invalid. Please ask your systems administrator to check your application configuration. Business Component '%1' must have top-level access configured, in order to support Child Access Objects of type 1-M or M-M. An error has occurred creating business component '%1' used by business object '%2'. Please ask your systems administrator to check your application configuration. Dynamic business component "1%" can not be got through NULL business object. An error with an invalid syntax for a business object query has occurred. Please ask your systems administrator to check your application configuration. There was an internal failure initializing the scripting language engine. Unable to create Business Service '%1' because its Class '%2' could not be instantiated.
Error Message #
Error Code
550 SBL-DAT-00550 544 SBL-DAT-00544 554 SBL-DAT-00554 556 SBL-DAT-00556 546 SBL-DAT-00546 216 SBL-DAT-00216
215 SBL-DAT-00215
DAT
DAT DAT
219 SBL-DAT-00219
DAT
555 SBL-DAT-00555
DAT
222 SBL-DAT-00222
DAT
DAT DAT
DAT DAT
8 of 117
Message Text The '%1' operation failed for the record with user key and value = '%2'. An error has occurred finding your prior place in the system. The record no longer exists or is not available to the view. Please try a new query. The value entered in field %2 of buscomp %3 does not match any value in the bounded pick list %1. Invalid property '%1' for business object definition '%2'. Please ask your systems administrator to check your application configuration. For '%1', the value '%2' selected in picklist '%3' is invalid when value '%4' is selected in picklist '%5', where '%1' is object, '%2' is related picklist value, '%3' is related picklist, '%4' is parent picklist value and '%5' is parent picklist. Unable to create the Business Service '%1' Unable to load the scripting extension language DLL '%1'! Scripting was enabled in this instance of Siebel, but the DLL which is needed to implement it could not be loaded. Unable to load the CORBA DLL '%1'! OLE automation was enabled in this instance of Siebel, but the DLL which is needed to implement it could not be loaded. Unable to load the OLE automation DLL '%1'! OLE automation was enabled in this instance of Siebel, but the DLL which is needed to implement it could not be loaded. The class '%1' is not supported on the platform you are currently running on. Product Comparison is not permitted on Products that are not derived from the same Product Family An error has occurred with the construction of business component '%1'. Please ask your systems administrator to check you application configuration.
Error Message #
Error Code
225 SBL-DAT-00225
DAT
226 SBL-DAT-00226
DAT
558 SBL-DAT-00558
DAT
DAT DAT
229 SBL-DAT-00229
DAT
230 SBL-DAT-00230
DAT
DAT DAT
233 SBL-DAT-00233
DAT
9 of 117
Message Text An invalid context syntax error has occurred. Please ask your systems administrator to check your application configuration. Value too long for field '%1' (maximum size %2). An error has occurred while deleting the record. Please try to delete again. The property 'Drop Sectors' must be set for this view. You have set the activity to the past. The alarm indicator will be removed. Duplicate position (%1) for user-defined menu item '%2'. User-defined method menu items must have a unique position which identifies their placement in the menu. An end of working set error has occurred. Please continue or contact your system administrator if the problem persists. The parent multi-valued group '%1' does not have any records. An error has occurred going to the last record. Please try again. The maximum number of audited fields allowed for your company has been reached. Please reduce the number of audited fields or contact Customer Care to increase the maximum limit for your company. A business component execution error has occurred. Please have your systems administrator check your application configuration. An error has occurred getting the business component %1 from business object %2. Please have your systems administrator check your application configuration. Get '%1' BusComp of '%2' on '%3' failed. An error has occurred getting the context for the business object. Please have your systems administrator check your application configuration.
Error Message #
Error Code
234 SBL-DAT-00234
DAT DAT
242 SBL-DAT-00242
DAT
DAT DAT
56,808 SBL-DAT-56808
DAT
243 SBL-DAT-00243
DAT
244 SBL-DAT-00244
DAT
DAT DAT
10 of 117
Message Text An error has occurred retrieving the multi valued group object for field '%1' . Please have your systems administrator check your application configuration. Get Parent BusComp of '%1' on '%2' failed. An error has occurred getting the pick list business component %1 for field %2 in business component %3. Please have your systems administrator check your application configuration. An error has occurred getting a query list. Please try your query again or execute another query. An error has occurred getting the query specification from the query list. Please try your query again or execute another query. An error has occurred finding your prior place in the system. Please try a new query. An error has occurred going to first record. Please try again. The User Name you have entered is invalid or your user position is not defined. Please try to logon again or contact your systems administrator for assistance. Invalid position '%1' for user-defined menu item '%2'. User-defined method menu items must have a position which identifies their placement in the menu. Tried to invoke method '%1' with %2 parameters but it requires %3 parameters. Both link '%1' and '%2' could be used in business object '%3'. Please continue or ask your systems administrator to check your application configuration if the problem persists. Unable to load the roles for this user '%1'. 'Based On Last' is not supported for multi-valued groups.
Error Message #
Error Code
247 SBL-DAT-00247
DAT DAT
250 SBL-DAT-00250
DAT
251 SBL-DAT-00251
DAT
252 SBL-DAT-00252
DAT
253 SBL-DAT-00253
DAT
254 SBL-DAT-00254
DAT
255 SBL-DAT-00255
DAT
DAT DAT
DAT DAT
11 of 117
Message Text Query capability is not available on multi-value groups. Source field '%1' for multi value group is currently inactive. Please continue or contact your systems administrator if the problem persists. You are not allowed to mark a record public or private unless you are the owner of the record. The number of fields currently being audited is greater than the value defined for Max # of Auditable Fields. Please increase the value of Max # of Auditable Fields or decrease the number of fields being audited. Menu Item '%1' and Menu Item '%2' in Menu '%1' both specify the same position. There is no menu item definition at position '%1' specified as the parent for menu item '%2' in menu '%3'. Menu item position '%1' is too deeply nested! User-defined menus can be at most %2 levels deep. The record '%1' can't be merged by you because it is global. The record '%1' can't be merged by you because you are not marked primary. No DLL defined for scripting language support. Scripting was enabled in this instance of Siebel, but the DLL which is needed to implement it could not be loaded. No DLL defined for CORBA support. OLE automation was enabled in this instance of Siebel, but the DLL which is needed to implement it could not be loaded. No DLL defined for OLE automation support. OLE automation was enabled in this instance of Siebel, but the DLL which is needed to implement it could not be loaded. Business object '%1' is not defined. Please ask your systems administrator to check your application configuration. No ImportSource '%1' is defined.\n\nPlease ask your systems administrator to check your 'ImportSource' configuration parameters in your ODF files.
Error Message #
Error Code
258 SBL-DAT-00258
DAT
56,808 SBL-DAT-56808
DAT
DAT DAT
261 SBL-DAT-00261
DAT
265 SBL-DAT-00265
DAT
266 SBL-DAT-00266
DAT
267 SBL-DAT-00267
DAT
268 SBL-DAT-00268
DAT
12 of 117
Message Text The business component '%1' requires automatic row id generation for new records. An error creating a new record has occurred. Please continue or ask your systems administrator to check your application configuration if the problem persists. An error has occurred going to next record. Please continue or ask your systems administrator to check your application configuration if the problem persists. An error has occurred retrieving the next set of records. Please continue or ask your systems administrator to check your application configuration if the problem persists. Neither Access Rule Nor Access Object user property is defined for Business Component '%1'. No association list is available in this applet. No import allowed for MVGs with association list. \n\nPlease ask your systems administrator to check your application configuration. Access denied. Access denied. No position for user-defined menu item '%1'. User-defined method menu items must have a position which identifies their placement in the menu. No menu text for user-defined menu item (position '%1'). User-defined method menu items must have the menu text specified for the menu item's label. An appointment has been created for '%1'. To create appointments for additional contacts drag them individually to the calendar. No Owner Field defined on View Mode for Business Component '%1'. Access denied. No Sales Rep View Mode configured, or configured improperly, for Business Component '%1'. Access denied.
Error Message #
Error Code
274 SBL-DAT-00274
DAT
275 SBL-DAT-00275
DAT
543 SBL-DAT-00543
DAT
DAT DAT
281 SBL-DAT-00281
DAT
282 SBL-DAT-00282
DAT
284 SBL-DAT-00284
DAT
13 of 117
Message Text An internal error, invalid notification information object, has occurred. Please continue or ask your systems administrator to check your application configuration if the problem persists. Either the ODBC data source '%1' is not defined or its directory is not defined. The operation you are trying to perform is not permitted on business component '%1' while it is not the child of a link. The multi-value group for field '%1' cannot be opened because it depends on the multi-value group '%2' which contains no records. Internal error during encryption of password Multiple matches were found for value '%1'. No match was found for value '%1'. You may not enter a blank value for this field. An error has occurred picking the current row. Please continue or ask your systems administrator to check your application configuration if the problem persists. Pick Map is empty for field '%1' of business component '%2'. Please ask your system administrator to check your application configuration. You have tried to modify a group of fields that may have more than one value. To edit or add field values in this group, please open the first field in the group by clicking on the multivalue field control. An error has occurred going to the prior record. Please continue or ask your systems administrator to check your application configuration if the problem persists. An error has occurred retrieving a prior set of records. Please continue or ask your systems administrator to check your application configuration if the problem persists.
Error Message #
Error Code
283 SBL-DAT-00283
DAT DAT
287 SBL-DAT-00287
DAT
288 SBL-DAT-00288 289 SBL-DAT-00289 290 SBL-DAT-00290 291 SBL-DAT-00291 292 SBL-DAT-00292
293 SBL-DAT-00293
DAT
294 SBL-DAT-00294
DAT
295 SBL-DAT-00295
DAT
296 SBL-DAT-00296
DAT
14 of 117
Message Text The length of the data '%1' for the field '%2' is larger than the allocated buffer size '%3'.\n\nPlease contact your system administrator. The system is unable to export data. The attempt to connect to data source '%1' failed. Please continue or ask your systems administrator to check your application configuration if the problem persists. The system is unable to export data. The attempt to create database table '%1' failed {%2}. Please continue or ask your systems administrator to check your application configuration if the problem persists. The system is unable to export data. The ODBC API function call made may be invalid {'%1'}. Please continue or ask your systems administrator to check your application configuration if the problem persists. The system is unable to export data, {%1}. Please continue or ask your systems administrator to check your application configuration if the problem persists. The system is unable to export data. An attempt to load '%1' dynamic link library has failed. Please continue or ask your systems administrator to check your application configuration if the problem persists. You have tried to run a static report. Because you have no records of your own, there is nothing to report. You may not save the query '%1' because there is already an existing query with that name that you do not own. Please choose a different name and save the query again. An error has occurred scrolling the working set. Please continue or ask your systems administrator to check your application configuration if the problem persists.
Error Message #
Error Code
297 SBL-DAT-00297
298 SBL-DAT-00298
DAT
299 SBL-DAT-00299
DAT
300 SBL-DAT-00300
DAT
301 SBL-DAT-00301
DAT
302 SBL-DAT-00302
DAT
303 SBL-DAT-00303
DAT
304 SBL-DAT-00304
DAT
305 SBL-DAT-00305
DAT
15 of 117
Message Text Searching is not allowed. There can not be two instantiations of the same business component within one Business Object '%2' and therefore self containing Links '%1' can not be defined for Business Object Components. Please continue or ask your systems administrator to check your An error has occurred setting the active row. Please continue or ask your systems administrator to check your application configuration if the problem persists. You do not have the required access privileges to view the detailed information about this record. Please contact your systems administrator or another member of the sales team if you would like further access to this record. An error has occurred setting the field value. Please continue or ask your systems administrator to check your application configuration if the problem persists. An error has occurred with setting the primary MVG ID. Please continue or ask your systems administrator to check your application configuration if the problem persists. An error setting the named query has occurred. Please execute another query or ask your systems administrator to check your application configuration if the problem persists.
Error Message #
Error Code
308 SBL-DAT-00308
DAT
309 SBL-DAT-00309
DAT
310 SBL-DAT-00310
DAT
311 SBL-DAT-00311
DAT
312 SBL-DAT-00312
DAT
An error has occurred setting the query specification. Please execute another query or ask your systems administrator to check your application configuration if the problem persists. You are not allowed to set a view mode that is broader than the one specified on the buscomp level for Business Component '%1'.
313 SBL-DAT-00313
DAT
547 SBL-DAT-00547
DAT
16 of 117
Message Text An error has occurred setting the working set size. Please continue or ask your systems administrator to check your application configuration if the problem persists. Sorting operations are not available. Sub Report '%1' and sub report '%2' in report '%1' both specify the same position. There is not report or sub report definition at position '%1' specified as the parent for sub report '%2' in report '%3'. Tree Node '%1' and Tree Node '%2' in Applet '%3' both specify the same position. There is no Tree node definition at position '%1' specified as the parent for Tree Node '%2' in Applet '%3'. The specialized method '%1' is not supported on the application. The specialized method '%1' is not supported on this business component. The specialized method '%1' is not supported on Business Component '%2' used by Business Object '%3'. The method '%1' is not supported on Business Service '%2'. An error has occurred putting the record in update mode. Please try again or contact your systems administrator if the problem persists. The current operation has been interrupted. Please try again or contact your systems administrator for assistance. View Map is not initialized. View '%1' is not licensed for this site. Personalization rules for user '%1' exclude accessibility of view '%2'. The responsibility of user '%1' does not allow accessing view '%2'. View '%1' cannot be accessed either because user '%2' does not have proper responsibility or at least one of your responsibilities has local access set to false for this view. View '%1' is not defined in Siebel Repository. View '%1' is not accessible on UNIX systems.
Error Message #
Error Code
314 SBL-DAT-00314
DAT DAT
DAT DAT
325 SBL-DAT-00325
DAT
326 SBL-DAT-00326 327 SBL-DAT-00327 328 SBL-DAT-00328 329 SBL-DAT-00329 330 SBL-DAT-00330
DAT DAT
17 of 117
Message Text Either Occam Validation BC or Occam Validation Field or both user properties are not defined for field '%1' in Business Component '%2'. SQL Cursor with ID %s Fetch Rows: %ld, Fetch All Time: %ld.%03ld seconds. Internal Error in Siebel COM Interface. Please contact your systems administrator. Unable to allocate memory for temporary OLE structure! The COM Automation method was called with an invalid argument when an Applet object was expected. The COM Automation method was called with an invalid argument when a Control object was expected. The SiebelDataServer was unable to load the configuration file. The COM Automation method was called with an invalid argument when a String was expected. COM support was disabled for this configuration. Please contact your systems administrator. The COM Automation method was called with an invalid argument when a string or an array of strings was expected. The SiebelDataServer was unable to login. The number of fields specified for this report exceeds the maximum of 200.\n\nPlease contact your system administrator. DeDuplication Results (Account) View DeDuplication Results (Account) List Applet DeDuplication Results (Contact) List Applet DeDuplication Results (Contact) View DeDuplication Results (Prospect) List Applet DeDuplication Results (Prospect) View You are not able to login to the database using the database credentials assigned to you. There may be a problem with the data source you are attempting to log into, or the credentials may be invalid for the data source.\n\nPlease contact your system adm An internal error has occurred in authentication system. You have entered an invalid set of credentials. Please type in your credentials again.
Error Message #
Error Code
548 SBL-DAT-00548
209 SBL-DAT-00209
DAT
DAT DAT
212 SBL-DAT-00212
DAT
213 SBL-DAT-00213
DAT
DAT DAT
50,382 SBL-DAT-50382 50,383 SBL-DAT-50383 50,384 SBL-DAT-50384 50,385 SBL-DAT-50385 50,386 SBL-DAT-50386 50,387 SBL-DAT-50387 541 SBL-DAT-00541
DAT DAT
18 of 117
Message Text Dedicated clients are not allowed to use external authentication with this database. Contact your system administrator. Your password is expired. Please change it. Your password is about to expire. Please change it. The account for user %1 has been deleted. Please contact customer support. %2 The account for user %1 has been disabled due to excessive failed login attempts. Please contact customer support. %2 An internal error with the Security Adapter DLL has occurred. Please ask your systems administrator to check your security adapter. %1 You are not able to login using the credentials returned by your security adapter. There may be a problem with the data source you are attempting to log into, or the credentials may be invalid for the data source. Please contact your system administrato Change password failed. %1 GetUserInfo failed for user %1. %2 Logins are currently not allowed. Contact your system administrator. %1 There are no credentials of type %1 for this user. %2 User %1 does not exist. %2 Dedicated clients are not allowed to use external authentication with this database. Contact your system administrator. Function %1 is not implemented. %2 Your password will expire soon. Please change your password. %1
Error Message #
Error Code
539 SBL-DAT-00539
335 SBL-DAT-00335
DAT
336 SBL-DAT-00336
DAT
337 SBL-DAT-00337
DAT
341 SBL-DAT-00341
DAT
DAT DAT
DAT DAT
19 of 117
Message Text The password you have entered is too easy to guess. Enter a more obscure password. %1 The password you have entered has been used by you too recently. Enter a new password. %1 The requested password does not conform to our password policy. Please review password requirements and select a new password. %1 The password you have entered is too short. Enter a longer password. %1 SetUserInfo failed for user %1. This may be due to a problem with the external authentication system, or attempting to enter a username or password that contains non-ASCII characters. %2 User %1 already exists. %2 The password you have entered is not correct. %1 Business component '%1' is already in cached update mode. The query could not be run because the criteria for field '%1' contained an invalid arithmetic expression. Please ensure that the search criteria is correctly formatted. This error is often caused by a missing operator (e.g. = or <) or missing quotes. Please ask your systems administrator to remove the arithmetic expression from the search expression. %1 doesn't support assignment from '%2' The selected record has already been added to the list. Please add another record or close the pop-up list and continue.
Error Message #
Error Code
346 SBL-DAT-00346
347 SBL-DAT-00347
DAT
348 SBL-DAT-00348
DAT
349 SBL-DAT-00349
DAT
350 SBL-DAT-00350
DAT
DAT DAT
DAT DAT
355 SBL-DAT-00355
DAT
DAT DAT
20 of 117
Message Text An internal error has occurred where there is an invalid association object for business component '%1'. Please ask your systems administrator to check your application configuration. Business component '%1' is not defined. Please ask your systems administrator to check your application configuration. Missing property '%1' for business component '%2' definition. Please ask your systems administrator to check your application configuration. A beginning of file reached error has occurred. Please continue or contact your systems administrator if the problem persists. The value '%1' cannot be converted to a date time value. Data value for field '%1' is larger than the limit %2 defined in the database. Please type in less information to ensure that your data is committed to the database. Data value for field is larger than the limit %2 defined in the database. Please type in less information to ensure that information is committed to the database. This operation is not supported for business component '%1' while it is in cached update mode. Business component '%1' does not support cached update mode. 'CascadeDelete' property set for many-to-many link definition '%1'. Please ask your systems administrator to check your application configuration. Column '%1' not defined in table '%2'. An internal error with the connector DLL '%1' has occurred, preventing one of the following export functions from being loaded: _SSACreateSqlObj@12 or _SSASqlObjLogon@24. Please verify that the correct version of the runtime client specific to your data
Error Message #
Error Code
358 SBL-DAT-00358
360 SBL-DAT-00360
DAT
361 SBL-DAT-00361
DAT
364 SBL-DAT-00364
DAT
DAT DAT
363 SBL-DAT-00363
DAT
365 SBL-DAT-00365
DAT
DAT DAT
DAT DAT
21 of 117
Message Text The operation you are trying to perform is only permitted while connected to the server database. Please connect to the server database and retry the operation. The Count function requires that parameter 1 be a string constant. The data source '%1' is not a SQL data source and cannot be used to access a SQL database. Definition for custom object '%1' does not exist. The database that you are connected to does not support 'IS NULL' queries for the field '%1'. DataSource named %1 could not be found. Check your configuration file. Date out of range. Valid range is January 1, 1753 to December 31, 4712. There is no field for denormalized column '%1' from table definition '%2' defined in business component '%3'. Table '%1' referenced as denormalization table for column '%2' in table definition '%3' does not exist. Cannot divide by 0 Attribute '%1' is defined more than once in type definition '%2'. Please ask your systems administrator to check your application configuration. Business component "1%" defined multiple times in business object "2%". Column '%1' is defined more than once in table definition '%2'. Please ask your systems administrator to check your application configuration. A record that contains identical values to the record you have created already exists. If you would like to enter a new record, please ensure that the field values are unique. The same values for '%1' already exist. If you would like to enter a new record, please ensure that the field values are unique.
Error Message #
Error Code
370 SBL-DAT-00370
DAT DAT
DAT DAT
377 SBL-DAT-00377
DAT
DAT DAT
DAT DAT
381 SBL-DAT-00381
DAT
382 SBL-DAT-00382
DAT
22 of 117
Message Text Custom Object '%1' defined multiple times. Please ask your systems administrator to check your application configuration. Field '%1' is defined more than once in business component definition '%2'. Please ask your systems administrator to check your application configuration. Index '%1' is defined more than once in table definition '%2'. Please ask your systems administrator to check your application configuration. String '%1' is defined more than once in string map definition '%2'. Please ask your systems administrator to check your application configuration. String map '%1' defined multiple times. Please ask your systems administrator to check your application configuration. Table '%1' defined multiple times. Please ask your systems administrator to check your application configuration. Type '%1' defined multiple times. Please ask your systems administrator to check your application configuration. Multiple definitions exist for business component '%1'. Please ask your systems administrator to check your application configuration. Integration object '%1' has multiple root components '%2' and '%3' specified. An end of file error has occurred. Please continue or ask your systems administrator to check your application configuration if the problem persists. Please sort the data before going to the last record. The data set is too large to return unless the data is sorted. An error occurred trying to commit/rollback a database transaction
Error Message #
Error Code
561 SBL-DAT-00561
383 SBL-DAT-00383
DAT
384 SBL-DAT-00384
DAT
386 SBL-DAT-00386
DAT
387 SBL-DAT-00387
DAT
388 SBL-DAT-00388
DAT
389 SBL-DAT-00389
DAT
385 SBL-DAT-00385
DAT
DAT DAT
391 SBL-DAT-00391
DAT
392 SBL-DAT-00392
DAT
23 of 117
Message Text Could not evaluate expression '%1' for field '%2' in business component '%3'. This operation is not valid when executed in setup only mode. Execution for Buscomp Component '%1' is not allowed. An error has occurred due to an invalid value '%1' for 'ExtensionType' property. Please ask your systems administrator to check your application configuration. Required '%1' user property is not defined for feature '%2'. Error fetching row at absolute position. Please continue or ask your systems administrator to check your application configuration if the problem persists. Field '%1' does not exist in definition for business component '%2'. Please ask your systems administrator to check your application configuration. The query expression on field '%1' is not valid. Please revise and try again. Query expression on field '%1' must be a constant. Please revise your query and try again. You cannot execute a query using the '%1' field. This operation is not available for read only field '%1'. The query could not be run because there is an invalid character in the field '%1'. Please ensure that the value in the field is formatted correctly with only valid characters. Missing quotes around the search criteria or unnecessary punctuation will o Attribute '%1' not defined for field '%2' in business component definition '%3'. Please ask your systems administrator to check your application configuration.
Error Message #
Error Code
DAT DAT
398 SBL-DAT-00398
DAT
DAT DAT
404 SBL-DAT-00404
DAT
24 of 117
Message Text An error due to an invalid data type '%1' specified for field '%2' defined for business component '%3'. Please ask your systems administrator to check your application configuration. '%1' cannot be converted to data type for field '%2'. Please ask your systems administrator to check your application configuration. Operation is not allowed on sql object in forward only mode. Please ask your systems administrator to check your application configuration if the problem persists. Business component '%1' does not support forward only mode. Please ask your systems administrator to check your application configuration if the problem persists. The '%1' function does not support querying. The '%1 ' function requires '%2' parameters. You supplied '%3' The '%1' function is not supported. An error occurred calculating the default value for field '%1' in business component '%2'. Invalid arguments to GetProfileAttr. This function requires exactly one argument which must be a string, specifying the name of the attribute to be fetched. An error has occurred getting a new row id for the new record. Please try again or ask your systems administrator to check your application configuration if the problem persists. An internal error has occurred due to an invalid definition for id business component. Please ask your systems administrator to check your application configuration. No field matches identifier '%1'. Please ask your systems administrator to check your application configuration.
Error Message #
Error Code
405 SBL-DAT-00405
406 SBL-DAT-00406
DAT
407 SBL-DAT-00407
DAT
408 SBL-DAT-00408
DAT
413 SBL-DAT-00413
DAT
414 SBL-DAT-00414
DAT
415 SBL-DAT-00415
DAT
416 SBL-DAT-00416
DAT
25 of 117
Message Text Two argument must be passed to the InList function: the first is the string to find and the second is the list to find it in. You have attempted to insert the value for column '%1' in table '%2' twice in the same statement. 'InterChildDelete' property set for 1-to-many link definition '%1'. Please ask your systems administrator to check your application configuration if the problem persists. Property '%1' is not defined for many to many link '%2'. Please ask your systems administrator to check your application configuration. An invalid assignment error has occurred. Please try again or ask your systems administrator to check your application configuration if the problem persists. An error has occurred due to an invalid property '%1' for column '%2' defined in table '%3'. Please ask your systems administrator to check your application configuration if the problem persists. The definition of integration component '%1' for integration object '%2' is invalid. The definition of integration component key '%1' for integration component '%2' is invalid. The definition of integration component field '%1' for integration component '%2' in integration object '%3' is invalid. An error has occurred due to an invalid property '%1' for field '%2' defined in business component '%3'. Please ask your systems administrator to check your application configuration if the problem persists. '%1' is not a valid value for property '%2' in field '%3', business component '%4'. Please ask your systems administrator to check your application configuration if the problem persists.
Error Message #
Error Code
417 SBL-DAT-00417
418 SBL-DAT-00418
DAT
419 SBL-DAT-00419
DAT
420 SBL-DAT-00420
DAT
421 SBL-DAT-00421
DAT
422 SBL-DAT-00422
DAT
426 SBL-DAT-00426
DAT
427 SBL-DAT-00427
DAT
26 of 117
Message Text The language code '%1' is not valid. Could not retrieve language id. An internal error occurred retrieving a field value for '%1'. The field has an invalid logical index. An error has occurred since '%1' is not a valid value for property '%2' in MultiValueLink definition, business component '%3'. Please ask your systems administrator to check your application configuration. '%1' is not a valid value for type property in argument '%3', business component method '%4'. Please ask your systems administrator to check your application configuration if the problem persists. The data type for field '%1' cannot be used in a Min or Max expression. The object definition of %1 '%2' is invalid. The data type for field '%1' referenced in a Sum expression is not numeric. Invalid definition for translated code column '%1' in table definition '%2'. Invalid translation table '%1' or configuration problem with column '%2' in table definition '%3'. Join constraint value '%1' is not valid; only constants are allowed. The argument of function '%1' must be of type date or time. Method '%1' of business service '%2' failed to return a key for table '%3' Invalid Key Generator user property syntax in business component '%1' You may not change the language setting for this program while it is running. Link destination field '%1' does not exist for link '%2' in business component definition '%3'. Please ask your systems administrator to check your application configuration.
Error Message #
Error Code
433 SBL-DAT-00433
DAT
431 SBL-DAT-00431
DAT
432 SBL-DAT-00432 434 SBL-DAT-00434 435 SBL-DAT-00435 436 SBL-DAT-00436 428 SBL-DAT-00428
437 SBL-DAT-00437 438 SBL-DAT-00438 439 SBL-DAT-00439 440 SBL-DAT-00440 441 SBL-DAT-00441 442 SBL-DAT-00442
27 of 117
Message Text An error occurred due to an invalid property '%1' for the link. Please continue or ask your systems administrator to check your application configuration if the problem persists. '%1' is not a valid value for property '%2' link definition '%3'. Please continue or ask your systems administrator to check your application configuration if the problem persists. Could not create log file '%1'. Please continue or ask your systems administrator to check your application configuration if the problem persists. You have entered an invalid set of logon parameters. Please type in your logon parameters again. The business component '%1' does not have a multi-value field for MVLink '%2' which corresponds to field '%3.%4'. This field is required. Attribute '%1' not defined for multi value field '%2' in business component definition '%3' Link '%1', referred to in multi valued link definition '%2', business component definition '%3', does not have '%4' as its child business component. Link '%1', referred to in multi valued link definition '%2', business component definition '%3', does not exist. Queries in multi-valued fields '%1' requires the term 'EXISTS' within your query criterion. Please refer to the documentation if you need more information. You cannot merge the selected records. The maximum number of records that can be merged at one time is %1. The Min and Max functions require that parameter 1 be a field name. Missing left hand side of comparison operator. Please check your search specification or ask your systems administrator to check your application configuration.
Error Message #
Error Code
443 SBL-DAT-00443
444 SBL-DAT-00444
DAT
445 SBL-DAT-00445
DAT
446 SBL-DAT-00446
DAT
454 SBL-DAT-00454
DAT
DAT DAT
456 SBL-DAT-00456
DAT
457 SBL-DAT-00457
DAT
447 SBL-DAT-00447
DAT
DAT DAT
28 of 117
Message Text The Model definition is not valid. Please ask your systems administrator to check your application configuration. MultiValueLink '%1' defined multiple times for business component '%2'. Please continue or ask your systems administrator to check your application configuration. Join in business component definition '%1' has source fields that come from tables '%2' and '%3' Invalid search specification '%1' for named search '%2'. Please continue or ask your systems administrator to check your application configuration if the problem persists. Link definition '%1' either does not exist or does not have business component '%2' as a child Business component definition for '%1' does not specify a table name The operation invalid when there are no rows available. You have attempted to denormalize calculated field '%2' in business component '%3' into column '%1'. Denormalized calculations are not allowed Destination link is not specified for multi-valued link definition Unable to find the parent buscomp of buscomp '%1', possibly because there is no active link at this time. Multi valued link '%1' refers to non-existent business component '%2' in business component definition for '%3' Multi value link definition '%1' does not exist for business component definition '%2'. Please ask your systems administrator to check your application configuration. Unable to find value for parent field '%1.%2'. Make sure LinkSpec = TRUE is used on the parent field. No records exist for the current query. No transaction is in progress
Error Message #
Error Code
450 SBL-DAT-00450
451 SBL-DAT-00451
DAT
452 SBL-DAT-00452
DAT
458 SBL-DAT-00458
DAT
459 SBL-DAT-00459
DAT
DAT DAT
465 SBL-DAT-00465
DAT
466 SBL-DAT-00466
DAT
467 SBL-DAT-00467
DAT
DAT DAT
29 of 117
Message Text Type '%1' not defined. Please ask your systems administrator to check your application configuration. Business component '%1' is not in cached update mode. This operation is not supported for business component '%1' because it is not the root of this cached update mode tree. Invalid operation when not executed. Generic SSA NOTOK error message. Invalid operation while not in update mode. The number '%1' resulted in a numeric overflow. Valid values are between '%2' and '%3'. The object definition manager has already been initialized. You are attempting an initialization of the object definition manager which is incompatible with a prior initialization. The datasource, SRF file and application must be the same for all initializations. %2 doesn't support operator '%1' %2 doesn't support operator '%1' with '%3' Error parsing expression '%2' for field '%1'. Please continue or ask your systems administrator to check your application configuration if the problem persists. Unable to find PickList '%1'. The Preference function requires that parameter 1 be a string constant. The Preference function requires that parameter 2 be a string constant. There is no preference value available for category '%1', value '%2'. Primary business component is not defined for business object '%1'. It is required for the business object which supports feature. System Field '%1' cannot be the PrimeIdField for MultiValueLink '%2' defined in business component '%3' Current search specification is too complex to be refined. Please start a new query or refine one that is less complex. Cannot evaluate "EXISTS" query while not in the context of a business component.
Error Message #
Error Code
475 SBL-DAT-00475
DAT DAT
DAT DAT
482 SBL-DAT-00482 483 SBL-DAT-00483 484 SBL-DAT-00484 485 SBL-DAT-00485 559 SBL-DAT-00559
486 SBL-DAT-00486
DAT
487 SBL-DAT-00487
DAT
488 SBL-DAT-00488
DAT
30 of 117
Message Text Cannot evaluate query node for identifier '%1' while not in the context of a business component. Cannot evaluate "LookupExpr" function while not in the context of a business component. SQL Query Tuner Error: %1 Can't Load Query Tuner DLL. Text constant (%1) needs to be enclosed in single quotes. Please continue or ask your systems administrator to check your application configuration if the problem persists. The selected record has been deleted by another user since it was retrieved. Please continue. Field '%1' is part of a recursive calculation expression. Fields '%2', and '%3' are also involved. Can not update Parent because this will introduce recursive reporting relationship or such relationship already exists for the given Parent. Repository '%1' not found. '%1' is a required field. Please enter a value for the field. Invalid RowIdField data. Please continue or ask your systems administrator to check your application configuration if the problem persists. There were more rows than could be returned. Please refine your query to bring back fewer rows Exists search not necessary for search on nonmulti-valued field '%1' Invalid search specification '%1'. Please continue or ask your systems administrator to check your application configuration if the problem persists. Sorting on calculated field '%1' is not allowed.
Error Message #
Error Code
489 SBL-DAT-00489
494 SBL-DAT-00494
DAT
495 SBL-DAT-00495
DAT
496 SBL-DAT-00496
DAT
DAT DAT
499 SBL-DAT-00499
DAT
500 SBL-DAT-00500
DAT
DAT DAT
502 SBL-DAT-00502
DAT
31 of 117
Message Text Configuration Error: Sort field '%1' does not exist in Business Component '%2'. Please continue or ask your systems administrator to check your application configuration if the problem persists. Sorting on multi valued field '%1' is not allowed. Please continue or ask your systems administrator to check your application configuration if the problem persists. Attribute '%1' not defined for string '%2' in string map definition '%3' Attribute '%1' not defined for string map definition '%2'. Please continue or ask your systems administrator to check your application configuration if the problem persists. The Sum function requires that parameter 1 be a field name. Definition for table '%1' does not exist. No language independent code exists for value '%1' and type '%2' with language '%3' in table '%4'. A transaction is already in progress Type not specified for typed translated code stored in table '%1'. Your entry for field '%1' is too long to fit in a UTF8 encoded enterprise database. Please try again with a shorter entry. The operation is not allowed while an unfinished transaction is in progress. Please call FinishTransaction to finish the transaction. The data retrieved from the database for field '%1' of BusComp '%2' contained characters that cannot be represented in your current locale/language.\n\nPlease notify your system administrator. This operation is not valid for an untyped query node. You have attempted to update the value for column '%1' in table '%2' twice in the same statement.
Error Message #
Error Code
503 SBL-DAT-00503
504 SBL-DAT-00504
DAT
DAT DAT
513 SBL-DAT-00513
DAT
514 SBL-DAT-00514
DAT
DAT DAT
32 of 117
Message Text Invalid operation when not in update mode. Please continue or ask your systems administrator to check your application configuration if the problem persists. The UtcConvert function requires that parameter 1 be a date time. The UtcConvert function requires that parameter 2 be a string. The value '%1' for field '%2' is required to be '%3'. Please enter a value that is '%4'. A Siebel local database error has occurred. Possibly the database name is invalid. Please continue or ask your systems administrator to check your application configuration if the problem persists. The selected record has been modified by another user since it was retrieved. Please continue. Invalid name for user profile attribute '%1'. Name must be mostly alphanumeric with little punctuation. Invalid ID for event when retrieving content targeting info. (The object type, name and event name must all be specified.) Invalid type for object when retrieving content targeting info. User profile attribute '%1' is not MultiValued. It cannot be used as an argument to GetProfileAttrAsList() The user profile attribute '%1' is read-only. This attribute can be used in query expressions, but cannot be changed since it is established by the system. The expression value used in a profile attribute set operation must be a number. Any Version Component: %1, Current Version: %2, Minimum Version: %3, Maximum Version: %4 The database to which you have connected is not a valid Siebel database. Please check your configuration information and contact your Siebel Administrator if this condition persists. The Siebel client will now exit.
Error Message #
Error Code
517 SBL-DAT-00517
522 SBL-DAT-00522
DAT
523 SBL-DAT-00523
DAT
524 SBL-DAT-00524
DAT
525 SBL-DAT-00525
DAT
DAT DAT
528 SBL-DAT-00528
DAT
533 SBL-DAT-00533
DAT
33 of 117
Message Text A newer version of software is required. Please install a newer version of Siebel Tools. %1 The current software kit cannot be published. The kit may have already been submitted or marked as inactive or no kit items have been defined. Please try again after verifying the software kit. Attempted to invoke method '%1' within Business Object '%2'. 'End day at' must be later than 'Start day at' and the time span must be at least two time intervals. You have exceeded the maximum number of 70 addressees. The first 70 addressees have been added to the email. This related information layout is currently assigned to one or more page layouts. Please reassign a different related information layout to those pages before deleting this layout. Creation of the company was successful but the creation of the Analytics folder for company %1 was unable to complete at this time. Further attempts to create the Analytics folder will be made by the system automatically. Answers On Demand will be unavai Changes to the user were saved successfully but we are unable to rename the Analytics folder for user %1 at this time. Any custom private reports the user created will be unavailable until folder renaming occurs. Further attempts to rename the Analytics Set By Not allowed to perform a batch delete when using Impersonate Admin. The request has been aborted. Your role currently does not allow you access to the shared calendar feature. Please select a user calendar view as a default. Export Request Complete 'Account Id' is a required field for 'Account Call'.
Error Message #
Error Code
534 SBL-DAT-00534
530 SBL-DAT-00530
DAT
DAT DAT
50,000 SBL-ODS-50000
ODS
50,765 SBL-ODS-50765
ODS
473 SBL-ODS-00473
ODS
472 SBL-ODS-00472
ODS
ODS ODS
34 of 117
Message Text Access Control Service - Error determining the Access Object for Business Component "%1". Access Control Service - Cannot acquire lock due to internal error. Access Control Service - Input argument for Business Component name is invalid. Access Control Service - Error loading the roles for this user. Explicit User Sharing - Permissions for record owners cannot be less than Full. You do not have the proper access rights to associate or update the contacts associated to this record. The customer does not have the "Allow Bulk Data Load" option enabled. Bulk Data Load users can only be added when the customer has enabled this option. Please contact the customer to enable the option and try again. Company Wide Shared Folder Shared Folder %1 assignment is not supported for this record type. Your company is not enabled for %1. Please contact customer care for more information. You must select a %1 to execute this assignment option. You must select a %1 that will be replaced to execute this assignment option. You cannot reduce your license number less than the number of active users A user cannot report to themselves. Please select a different user to be this user's manager. You cannot delete the company primary administrator You cannot delete an active company You can only delete a Trial or Demo or Test company You can only delete a user that belongs to Trial or Demo company. This function may only be used for Trial Companies. 'Primary Contact Id' is a required field for 'Contact Call'.
Error Message #
Error Code
100 SBL-ODS-00100
101 SBL-ODS-00101 102 SBL-ODS-00102 103 SBL-ODS-00103 104 SBL-ODS-00104 50,560 SBL-ODS-50560
105 SBL-ODS-00105
ODS
108 SBL-ODS-00108 109 SBL-ODS-00109 110 SBL-ODS-00110 111 SBL-ODS-00111 50,004 SBL-ODS-50004 50,732 SBL-ODS-50732
35 of 117
Message Text You have selected "Open in Custom Web Tab", however a tab was not selected from the drop down list. Please select a target tab. Custom Web Tab Names are restricted to Alphanumeric characters, please re-enter a value. 1% Report path invalid. Please specify a valid path. Default Value must be set for a field marked Required AND Read-only. Operation cannot be completed - your company is over its data storage quota. The Contact's Manager must be different than the Contact. Please select another item. The Parent Account must be different than the Account. Please select another item. The Parent Dealer must be different than the Dealer. Please select another item. Failed to create the log file. Failed to open the log file. Failed to recover the log file. The layout is currently assigned to one or more Roles. Please reassign a different layout to those roles before deleting this layout. The layout is currently assigned to one or more page layouts. Please reassign a different layout to those pages before deleting this layout. A record that contains identical values to the record you are trying to create already exists . If you would like to enter a new record, please ensure that the field values are unique. Cannot have more than one record with %1 set to 'Owner' The Id, '%1' identified more than one record, please correct the data or retry your request using the Id One or more required fields are missing. You must provide a value for PrimaryId or PrimaryExternalId, DuplicateId or DuplicateExternalId You have entered an invalid character Valid email required
Error Message #
Error Code
50,549 SBL-ODS-50549
50,559 SBL-ODS-50559
ODS
50,748 SBL-ODS-50748 50,731 SBL-ODS-50731 50,623 SBL-ODS-50623 112 SBL-ODS-00112 113 SBL-ODS-00113
114 SBL-ODS-00114 50,736 SBL-ODS-50736 478 SBL-ODS-00478 479 SBL-ODS-00479 480 SBL-ODS-00480 488 SBL-ODS-00488
50,764 SBL-ODS-50764
ODS
50,006 SBL-ODS-50006
ODS
ODS ODS
50,630 SBL-ODS-50630
ODS
ODS ODS
36 of 117
Message Text The end time must be after the start time. Please update your start and end times appropriately. Invalid method parameter(s): '%1' Cannot determine your organization's address type. Please inform the system administrator. The exchange rate between '%1' and '%2' is not defined. Please select another currency code. User property '%1' is missing in the business service '%2'. User property '%1' is missing in the business component '%2'. User property '%1' is missing in the business service '%2'. Invalid format in provided PDQ list: objects and PDQs should be in pairs. Invalid OM session Object '%1' is not supported offline Invalid PDQ: object '%1', PDQ '%2' Property '%1' is missing from input property set. Unknown Error (NOTOK) SyncNodeId provided does not match any existing ones. No offline client software version defined. PDA Sync method '%1' returned NOTOK. PDA Sync method '%1' returned incorrect output Session is expired or there was another connect with the same UserID from another computer. No SyncNodeId is provided in upload request. The value '%1' for field '%2' is required to be >= 0. Please enter a value that is >=0. The primary and duplicate records cannot be the same Record not found, either the Primary or Duplicate record was not found No fields have been selected to be displayed. Please select one or more fields from the Available Fields section before proceeding.
Error Message #
Error Code
116 SBL-ODS-00116
ODS ODS
50,574 SBL-ODS-50574
ODS
50,008 SBL-ODS-50008 118 SBL-ODS-00118 119 SBL-ODS-00119 120 SBL-ODS-00120 121 SBL-ODS-00121 122 SBL-ODS-00122 123 SBL-ODS-00123 124 SBL-ODS-00124 125 SBL-ODS-00125 126 SBL-ODS-00126 127 SBL-ODS-00127 128 SBL-ODS-00128 129 SBL-ODS-00129 130 SBL-ODS-00130
ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS
ODS ODS
37 of 117
Message Text Account relationships exist between two different accounts. You have attempted to create a relationship from this account to itself. Please select an alternate account for the relationship. Contact relationships exist between two different contacts. You have attempted to create a relationship from this contact to itself. Please select an alternate contact for the relationship. The layout does not contain any targeted search fields. Please specify your fields before you save. The layout does not contain a search results layout. Please define the search results layout before you save. Integration Event File Limit is required when Integration Event is enabled. Please provide a value. The value you entered in the '%1' field doesn't match the value specified in the '%2' field. If you still wish to change the '%1', you must remove the value specified in '%2' first. The value you entered in the '%1' field or '%2' field doesn't match the value specified in the '%3' field. If you still wish to change the '%1' or '%2', you must remove the value specified in '%3' first. Ensure that Session Limit specified is within the allowed range. The permitted range is between %1 and %2. Export failed: An internal server error occurred. Export Request Completed Export Request Failed Can not convert file name Can't convert error from Sschar to ASCII An error occurred while creating a file. Your company full export quota has been exceeded. You can only perform a partial export at this time. Error when load compression utility dll provided by InfoZip. No files need to zip Please select at least one object to export. Your company partial export quota has been exceeded. You can only perform a full export at this time.
Error Message #
Error Code
133 SBL-ODS-00133
134 SBL-ODS-00134
ODS
489 SBL-ODS-00489
ODS
490 SBL-ODS-00490
ODS
487 SBL-ODS-00487
ODS
50,009 SBL-ODS-50009
ODS
50,518 SBL-ODS-50518
ODS
135 SBL-ODS-00135
ODS
50,747 SBL-ODS-50747 50,029 SBL-ODS-50029 50,030 SBL-ODS-50030 50,031 SBL-ODS-50031 50,032 SBL-ODS-50032 50,033 SBL-ODS-50033 50,034 SBL-ODS-50034
38 of 117
Message Text Your company already has a pending administrator export request for the %1 object. Please wait until that request is completed before submitting a new %2 export. Your company export quota has been exceeded. Please contact Siebel CRM On Demand customer service. Export Unexpected error Zip failed. Export failed: The size of your export is too large for the Zip utility. Please refine your export to a smaller time frame. Exported File Name Organization view mode must be defined on BusComp %1 in order to do export. A forecast can be validated only if all forecast users, other than the top person in the reporting tree, have a manager included in the forecast. Two or more of the users, related to the roles you have selected for your forecast, do not have managers. Ple Please select at least one role to be included in the Forecast. Via Forgot Password Input arguments into File Transfer Service are missing, empty or incorrect File Transfer Service is missing a User Property File Transfer Service received out of order data chunks or is missing chunks for this context Error in closing FS file for this context A file already exists in the File Transfer Service with that context. The data chunk sent to the File Transfer Service was incomplete or cannot be decoded File Transfer Service error in setting file size/time The file for this context doesn't exist in the File System File Transfer Service can't connect to File System through Siebel FSM File System Manager may have prematurely closed file or experienced error File Transfer Service error in getting file name The file uploaded through the File Transfer Service is missing data
Error Message #
Error Code
50,039 SBL-ODS-50039
50,040 SBL-ODS-50040
ODS
138 SBL-ODS-00138 50,547 SBL-ODS-50547 139 SBL-ODS-00139 140 SBL-ODS-00140 141 SBL-ODS-00141
145 SBL-ODS-00145 146 SBL-ODS-00146 147 SBL-ODS-00147 148 SBL-ODS-00148 149 SBL-ODS-00149 150 SBL-ODS-00150
39 of 117
Message Text Invalid Method invoked on File Transfer Service Error in opening FS file for this context Error in reading from FS file for this context. Error in renaming FS file for this context Error in renaming FS file for this context File Transfer Service state for this context is missing or malformed Unexpected End-of-file while reading from FS file for this context. Error in writing to FS file for this context The administrator has deleted a group you belong to, this process must complete prior to creating new records. Please try again in a few minutes. You cannot have more than one report for this layout Invalid Argument The field validation error message can only contain alphanumeric characters, spaces, periods, commas and dashes. Layout cannot be deleted because it is assigned to a role The company is already a subscription company. The purchaser does not exist. The company you specify does not exist. Wrong argument value for calling purchaseLicense function. License number must greater than 0. Internal Error: Unable to retrieve the list WARNING: You have more than %1 records in your list. Your exported CSV file has been truncated and contains the first %2 records. Please select the "Queued Export" option if you would like to export all records in your list. Picklist value cannot contain any of the following three characters: pipe (|), comma (,), semi-colon (;) Your list export quota has been exceeded. This will be reset in 24 hours. Please try your export again at that time. Error, invalid field name. Please check if '%1' is a valid field. Error, the field '%1' requested is not a valid picklist.
Error Message #
Error Code
Message Facility ODS ODS ODS ODS ODS ODS ODS ODS ODS
151 SBL-ODS-00151 152 SBL-ODS-00152 153 SBL-ODS-00153 154 SBL-ODS-00154 155 SBL-ODS-00155 156 SBL-ODS-00156 157 SBL-ODS-00157 158 SBL-ODS-00158 50,561 SBL-ODS-50561
499 SBL-ODS-00499 181 SBL-ODS-00181 182 SBL-ODS-00182 183 SBL-ODS-00183 184 SBL-ODS-00184 185 SBL-ODS-00185 50,541 SBL-ODS-50541 50,539 SBL-ODS-50539
50,634 SBL-ODS-50634
ODS
50,538 SBL-ODS-50538
ODS
ODS ODS
40 of 117
Message Text Invalid Language Code. Your company is not configured for this language. Please use a language it has been configured for. Configuration Error: Definition of integration object '%1' does not contain the root component. '%1' is not a valid object name. Only the owner or delegate can delete this activity. Your company policy does not allow end users to change their own email address. If you want to change your email address, please contact your company administrator. Your company policy does not allow end users to change their own user ID. If you want to change your user ID, please contact your company administrator. The Company Sign In ID cannot contain any of the following characters: / \\ # or space. Company Sign In ID is a required field. WARNING: The User Sign In IDs will not be changed to reflect the new Company Sign In ID. New or Modified users will use the new Company Sign In ID. We strongly recommend you modify each User ID to make sure that the new Company Sign In ID is assigned t "%1" is already being used by another company. Please use a different company domain name. The domain name cannot contain any of the following characters: / \\ # or space. The Company Idle Timeout exceeds the Maximum System Idle Timeout of %1 minutes. Your company allows you to change your password for %1 times within %2 day(s). You have already exceeded this limit. You have exceeded the number of attempts to answer your security questions. Your account is now locked. Please contact your company administrator to reset your password. You will not be able to sign in to the application until this process is completed.
Error Message #
Error Code
50,718 SBL-ODS-50718
186 SBL-ODS-00186
ODS
50,497 SBL-ODS-50497
ODS
468 SBL-ODS-00468
ODS
ODS ODS
465 SBL-ODS-00465
ODS
449 SBL-ODS-00449
ODS
41 of 117
Message Text The answers you provided previously were incorrect, please answer the following questions.
Error Message #
Error Code
450 SBL-ODS-00450
Private You must specify a valid domain name in order to change your Default User ID Type to Domain/User ID. Number Of Security Questions To Be Complete must be equal or greater than Number Of Security Questions To Be Answered. You must complete %1 unique questions. The user ID cannot contain any of the following characters: / \ # or space. The Default User ID Type of your company is set to Company Domain\User ID. The Domain Name of your company is [%1]. When creating new user, please make sure the user ID starting with [%1\]. The User Sign In ID is invalid. The User Sign In ID does not contain a proper delimiter. The Company Sign In ID of your company is [%1]. When creating or editing a user, please make sure the User Sign In ID starts with [%1\]. The User Sign In ID you have requested cannot be used at this time. Please select a different User Sign In ID or try again later. This list contains %1 records. This exceeds the %2 record retrieval limit set by the system. Please select a new list or refine the current list. Please select a pre-defined list or query prior to executing the Download operation. On Demand Technical Support Access Denied. Access Denied: You cannot grant a user access to this record that exceeds your own access level. Please select a more restrictive access level. Access Profile '%1' not found. Shared Folders
ODS ODS
50,490 SBL-ODS-50490
ODS
507 SBL-ODS-00507
ODS
188 SBL-ODS-00188
ODS
ODS ODS
42 of 117
Message Text The folder you are trying to access has been deleted or has been assigned a new owner and you no longer have access to it. If you deleted the folder, it may be accessed in Deleted Items. If you continue to have problems contact your Siebel CRM On Demand A There are no available Analytics Servers to fulfill this request. The specified analytics server is Inactive. Siebel CRM On Demand was unable to complete your request. Please contact Siebel CRM On Demand Technical Support. The web group you are trying to access has been deleted or has been assigned a new owner and you no longer have access to it. If you deleted the web group, it may be accessed in Deleted Items. If you continue to have problems contact your Siebel CRM On De Condition 'Between' requires two values Field '%1" doesn't allow selected condition '%2', please select proper condition. The value '%1' doesn't match data type '%2' of the Field '%3', please enter correct value. Parameter '%1' for method '%2' is required, please check your configuration. Can not find the default email from address, Email From Address is a required parameter to send an email. Please check your configuration! Cannot find Where clause definition for Assignment Object '%1', please check your configuration. Cannot find Where clause definition for Assignment Object '%1', please check your configuration. Cannot find Where clause definition for Assignment Object '%1 Apply To %1 Assignment Option Your request of Batch %1 Assignment has completed. Not all records in the list could be updated. Go back to the Batch %1 Assignment Queue page to view the log file to see which records could not be updated in the system.
Error Message #
Error Code
459 SBL-ODS-00459
460 SBL-ODS-00460
ODS
192 SBL-ODS-00192 193 SBL-ODS-00193 194 SBL-ODS-00194 195 SBL-ODS-00195 196 SBL-ODS-00196
197 SBL-ODS-00197
ODS
43 of 117
Message Text Your request to update the records in the [%1] list could not be completed at this time. The system was unable to complete the process. You can resubmit the request by going to the Batch %1 Assignment Queue page in the application and clicking the "Re-Submit" link next to the request in the Processed Requests section of the page. Your Batch %1 Assignment Request has completed Your Batch %1 Assignment Request has been aborted The following records could not be updated: The following records were processed but could not be deleted from the system: The |Book~Singular| selected as the Parent |Book~Singular| is already a direct or an indirect sub-|Book~Singular| of this |Book~Singular|. This type of interdependent relationship is not allowed. You must select a different Parent |Book~Singular|. User Property "%1" is not defined for the BusComp "%2". Please ask your system administrator to check the configuration for this BusComp. Access Denied: You do not have the required access to Calls to perform the desired action. Please contact your administrator if you feel you have received this message in error. A record that has identical view name to the record you are trying to create already exists in your company. If you would like to create a new view, please ensure that the view name is unique. All associated sub |Book~Plural|, users, and data must be removed before deleting this |Book~Singular|. This |Book~Singular| is specified to contain data and cannot be converted to a |Book~Singular| that cannot contain data. Picklist element positions cannot be changed. '%1' has been moved from position %2 to position %3. The custom field cannot be created. 'Mark for Translation' cannot be used in languages other then the primary. Looping cascades are not allowed.
Error Message #
Error Code
50,599 SBL-ODS-50599 50,600 SBL-ODS-50600 50,606 SBL-ODS-50606 50,181 SBL-ODS-50181 494 SBL-ODS-00494
50,745 SBL-ODS-50745
ODS
446 SBL-ODS-00446
ODS
50,193 SBL-ODS-50193
ODS
493 SBL-ODS-00493
ODS
485 SBL-ODS-00485
ODS
50,194 SBL-ODS-50194
ODS
44 of 117
Message Text The chosen related picklist already has a parent. Multiple parents for one picklist are not allowed. You must select at least one displayed value before continuing! A custom field of type '%1' in '%2' already exists with name '%3' The Bulk Data Load options can only be modified by a company administrator through the On Demand application. You do not have permission to change the company status from '%1' to '%2'. Please contact Customer Care for help. Some of the IP addresses defined are not valid. Please enter valid IP addresses and save again. Your current IP is not in the range you specified. You cannot change company profile in %1 status. Please contact Customer Care for help. Company status cannot be changed from '%1' to '%2'. The given Company Sign In ID is already being used - please choose another. %1 Name Include Sub %1 List No change required. # of Records Succeeded Replace %1 Summary of results Target %1 Time Completed Time Submitted User A default |Book~Singular| for this record type is already set for this user. '%1' is the company's default currency and it cannot be disabled. '%1' is the company's default language and it cannot be disabled. You cannot delete the default sales process. Your company must have a single default sales process. Failed to send email: %1 Account Address Primary Contact
Error Message #
Error Code
50,639 SBL-ODS-50639
70,164 SBL-ODS-70164
ODS
50,196 SBL-ODS-50196
ODS
ODS ODS
70,167 SBL-ODS-70167 50,615 SBL-ODS-50615 50,608 SBL-ODS-50608 50,611 SBL-ODS-50611 50,605 SBL-ODS-50605 50,762 SBL-ODS-50762 50,607 SBL-ODS-50607 50,610 SBL-ODS-50610 50,601 SBL-ODS-50601 50,609 SBL-ODS-50609 50,604 SBL-ODS-50604 50,603 SBL-ODS-50603 50,602 SBL-ODS-50602 492 SBL-ODS-00492 50,751 SBL-ODS-50751 199 SBL-ODS-00199 50,555 SBL-ODS-50555 462 SBL-ODS-00462 200 SBL-ODS-00200 50,519 SBL-ODS-50519 50,521 SBL-ODS-50521 50,520 SBL-ODS-50520
ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS
45 of 117
Message Text The Parent Category must be different than the Category. Please select another Category. Could not find definition for Integration Component '%1' Could not find definition for Integration Component '%1' Could not find definition for Integration Component '%1 The value entered for '%1' exceeds the maximum value allowed. Account Asset Customer Contact Price Product Product Category Price multiplied by Quantity Business Object '%1' must be configured with a primary Business Component Opportunity Products totals Cannot find definition for field "%1". A non-NULL value must be given for field "%1", since that field cannot contain NULLs. You cannot share your calendar with yourself. Previously defined group must contain at least 1 member. Siebel CRM On Demand field display names cannot contain the following values !, ", or | Unable to get field mappings for current request. More than one matching entries are found in the picklist. The value '%1' was not imported for the %2 field '%3'. Unable to find any pending import request. Undefined import request type: "%1" The integration tag should not be empty This integration tag already exists. Please use a different tag. Internal error: %1 This sales stage category is being referenced by sales processes. If you would like to delete this category, you must first remove all references to the category before this can be deleted. The Default Value entered does not match the field type. Please enter a valid value.
Error Message #
Error Code
50,198 SBL-ODS-50198
50,746 SBL-ODS-50746
ODS
50,199 SBL-ODS-50199 50,200 SBL-ODS-50200 50,201 SBL-ODS-50201 50,202 SBL-ODS-50202 50,203 SBL-ODS-50203 50,204 SBL-ODS-50204 50,205 SBL-ODS-50205 50,206 SBL-ODS-50206 70,174 SBL-ODS-70174 50,207 SBL-ODS-50207 201 SBL-ODS-00201 202 SBL-ODS-00202 50,208 SBL-ODS-50208 50,209 SBL-ODS-50209 203 SBL-ODS-00203 204 SBL-ODS-00204 205 SBL-ODS-00205
ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS
206 SBL-ODS-00206 207 SBL-ODS-00207 50,210 SBL-ODS-50210 50,211 SBL-ODS-50211 208 SBL-ODS-00208 50,212 SBL-ODS-50212
50,213 SBL-ODS-50213
ODS
46 of 117
Message Text The Default Value for this field must match one of the defined picklist values. Please enter a valid picklist value. Invalid repository definition of link "%1" Invalid definition of MV Link "%1" in Business Component "%2" The New Passwords you entered do not match The Old Password you entered does not match the existing password You cannot delete a process that is defined as a default process for any opportunity types or roles. You must remove these dependencies before deleting the sales process Invalid Adapter Service request name "%1" Invalid Adapter Service request parameters Invalid view mode "%1". Invited Contacts Invited Users The parent row id count in the Adapter Service request does not match the link definitions in Business object "%1" The language '%1' is in use by at least one user ('%2') and cannot be disabled. Custom picklist values not found for type '%1' and primary language '%2' Custom picklist definition record not found for type id '%1' Default name is missing for control '%1', object '%2' and language '%3' No languages are defined. Cannot copy translation records. You already have a layout named '%1', please choose another name. There is no layout called '%1' for User Row Id '%2' Can't reject rejected lead. Please select an existing Account in the Associated Account field. You must select an action for Contact, Account and Opportunity in order to complete the lead conversion process. Please specify an Account Name in order to auto-create a new Account. This lead has already been converted to an opportunity. Please reference the associated opportunity record for additional information.
Error Message #
Error Code
50,214 SBL-ODS-50214
209 SBL-ODS-00209 210 SBL-ODS-00210 211 SBL-ODS-00211 212 SBL-ODS-00212 50,215 SBL-ODS-50215
213 SBL-ODS-00213 214 SBL-ODS-00214 215 SBL-ODS-00215 50,216 SBL-ODS-50216 50,217 SBL-ODS-50217 216 SBL-ODS-00216
50,218 SBL-ODS-50218 50,219 SBL-ODS-50219 50,220 SBL-ODS-50220 50,221 SBL-ODS-50221 217 SBL-ODS-00217 218 SBL-ODS-00218 219 SBL-ODS-00219 220 SBL-ODS-00220 221 SBL-ODS-00221 222 SBL-ODS-00222
ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS
ODS ODS
47 of 117
Message Text Please select an existing Contact in the Associated Contact field. Please specify the First Name and Last Name in order to auto-create a new Contact. An opportunity record with the same name already exists. To create a new opportunity, please select a unique name for this record. The lead conversion could not be completed. The value in the lead pick list field %1 does not exist in the target field %2. Please contact your system administrator. Please specify the Opportunity Name in order to complete the lead conversion process. The following field(s) are required to mark a lead as qualified: %1. Please select a value for these fields before proceeding. A list named '%1' already exists. Please choose a different name. An error occurred while retrieving the ""%1"" business component object definition.\nPlease try again or contact Customer Care for help. The List Of Values business component has not been executed.\nPlease try again or contact Customer Care for help. The business component has not been set.\nPlease try again or contact Customer Care for help. The LOV of type '%1' cannot be decoded for language '%2'. The picklist cannot be completely disabled. Please ensure there is at least one enabled value. Could not retrieve the column definition for business component '%1', field '%2'. <Custom Value> The LOV definition record for type %1 cannot be found. A duplicate picklist element attribute has been identified. (Type = '%1', Language = '%2', LIC = '%3', LDV = '%4', Order = '%5'). Please ensure that you are using unique values, or contact Customer Care for help. The specified LOV element does not exist (buscomp = '%1', value = '%2', field = '%3')
Error Message #
Error Code
50,564 SBL-ODS-50564
ODS
228 SBL-ODS-00228
ODS
233 SBL-ODS-00233
ODS
ODS ODS
50,223 SBL-ODS-50223
ODS
50,224 SBL-ODS-50224
ODS
ODS ODS
50,231 SBL-ODS-50231
ODS
48 of 117
Message Text An error occurred while retrieving the ""%1"" field object definition for business component ""%2"".\nPlease try again or contact Customer Care for help. An error occured while retrieving the picklist for buscomp '%1', field '%2', type '%3'.\nPlease try again or contact Customer Care for help. An invalid (null) business component reference has been encountered. The application encountered an invalid set of input values.\nPlease try again or contact Customer Care for help. The specified order values are not valid (possible reason: duplicate values - make sure each order value is unique) The picklist language has not been set.\nPlease try again or contact Customer Care for help. One or more attributes are missing for LOV of type '%1', language '%2'. The application encountered an incomplete set of input parameters.\nPlease try again or contact Customer Care for help. The order values have not been specified. The Propagate flags have not been specified. Picklist elements cannot be added in a language other then the company's primary language. Error: There has been an internal system error while processing a picklist. If this error occurs again, please contact your system administrator to report the problem. The company has no active languages. Please activate at least '%1' language. There are no values defined in %1 for this picklist.\nPlease try again or contact Customer Care for help. There can be no more then 1000 elements in a picklist. An error occurred while retrieving the picklist object definition for business component ""%1"", field ""%2"".\nPlease try again or contact Customer Care for help. The picklist definition has not been set. Picklist element '%1' not found for type '%2', language '%3'.
Error Message #
Error Code
50,232 SBL-ODS-50232
50,233 SBL-ODS-50233
ODS
ODS ODS
50,236 SBL-ODS-50236
ODS
50,237 SBL-ODS-50237
ODS
ODS ODS
50,243 SBL-ODS-50243
ODS
ODS ODS
ODS ODS
ODS ODS
49 of 117
Message Text Picklist not found for type '%1', language '%2'. You cannot use probability values less than 0 or greater than 100 The picklist for buscomp '%1', field '%2' cannot be modified (it is read-only). Could not retrieve the table definition for business component '%1', field '%2'. The picklist type for buscomp '%1', field '%2' is not defined.\nPlease try again or contact Customer Care for help. The application encountered an unexpected null value.\nPlease try again or contact Customer Care for help. No display values have been specified in the request. You do not have sufficient access to the records you are attempting to merge. At a minimum, you must have edit access to the primary record and delete access to the duplicate record to perform this action. Missing required input property "%1" Missing 'method' property on the Invoke Method request No fields in Business Component "%1" use MV Link "%2", cannot retrieve the MVG Business Component Missing value for field '%1' on '%2' spec Invalid multi-select picklist value in bus comp '%1', field '%2'. The buscomp '%1', multi-select picklist field '%2' has more than 10 values selected. The Multi-Select Picklist value [%1] is currently disabled. Immediate list export cannot be resubmitted. This request is obsolete and cannot be resubmitted. The buscomp '%1', field '%2' is not a MultiSelect Picklist field. Could not retrieve the association list for Business Component "%1" (pointer is null) You have reached your limit of type '%1' custom fields available for '%2' You do not have permission to modify this record. You do not have sufficient privileges to use PIM Sync. No sales method is defined. Cannot create sales stage translations.
Error Message #
Error Code
50,250 SBL-ODS-50250 50,251 SBL-ODS-50251 50,252 SBL-ODS-50252 50,253 SBL-ODS-50253 50,254 SBL-ODS-50254
50,255 SBL-ODS-50255
ODS
ODS ODS
245 SBL-ODS-00245 50,637 SBL-ODS-50637 50,636 SBL-ODS-50636 50,739 SBL-ODS-50739 464 SBL-ODS-00464 442 SBL-ODS-00442 50,635 SBL-ODS-50635 246 SBL-ODS-00246 247 SBL-ODS-00247 50,258 SBL-ODS-50258 50,542 SBL-ODS-50542 50,259 SBL-ODS-50259
ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS
50 of 117
Message Text Base object inheritance in control object can not be looped! The following fields are required for sales stage %1: %2 Out of memory. Parameter not found. Password Policy Failure - Your new password must contain at least one character from any two of the following groups: (1) English uppercase characters (A...Z) (2) English lowercase characters (a...z) (3) Numeric characters (0, 1, 2...9) (4) Non-alphanum Password Policy Failure - Your new password must be between %1 and %2 characters in length. Password Policy Failure - Your new password must be different from your old password. Password Policy Failure - Your new password cannot contain the prefix '%1'. Password Policy Failure - Your new password must be different from your user ID and email address. At least one value must be added to the picklist. This picklist must contain only numeric values.\nPlease ensure that all values are numeric. Accounts created in On Demand:\r\n[These Accounts were created because an Account associated with a Contact in your PIM Device did not match an existing Account in On Demand.]\r\n Can not find the record to delete. Fail to delete this record. Invalid email address format. Valid format is 'a@b.c'. Value [%1] for field [%2] is invalid. \tThe sync process was teminated due to invalid XML. Can not find the record to modify. The company name for [%1] matched multiple account records. The contact has been associated to Account Name: %2, Location: Unmatched PIM Contacts
Error Message #
Error Code
491 SBL-ODS-00491 50,260 SBL-ODS-50260 248 SBL-ODS-00248 249 SBL-ODS-00249 250 SBL-ODS-00250
251 SBL-ODS-00251
ODS
252 SBL-ODS-00252
ODS
ODS ODS
ODS ODS
257 SBL-ODS-00257
ODS
258 SBL-ODS-00258 259 SBL-ODS-00259 50,261 SBL-ODS-50261 260 SBL-ODS-00260 261 SBL-ODS-00261 262 SBL-ODS-00262 50,586 SBL-ODS-50586
51 of 117
Message Text %1 not deleted in On Demand:\r\n[These %1 appear to have been deleted in your PIM Device but were not deleted in On Demand. To remove these records from On Demand, you must delete them from within On Demand.]\r\n The company name for [%1] did not match any account records. The contact has been associated to Account Name: %2, Location: Unmatched PIM Contacts No matching picklist entry found for On Demand field %1. Unmatched PIM Contacts Records failed to sync: Records synced with warning: This is a reminder from the %1 system to synchronize your On Demand records with Outlook or Palm device. Synchronizing your data on a regular basis ensures you have the most up-to-date information available in On Demand and in Outlook or Palm device. Reminder to Sync On Demand with Outlook or Palm You do not have permission to sync %1. Your company administrator would need to update your permissions to %1 so that you can sync %1. Server is busy. Please try again later. About Siebel PIM Sync On Demand Completing client installation. Please wait, this may take a few moments. Email Address Launch Siebel PIM Sync On Demand Launch the Read Me file Online Manual Password Siebel PIM Sync On Demand - Proxy Settings Readme File Lead Name Related To More than one matching records are found for PIM sync field [%1] with value [%2]. \tYou have encountered unexpected Siebel Server error. Please try again. If you keep encountering this error, please send the following error message to the customer support for help.\r\n\t%1
Error Message #
Error Code
263 SBL-ODS-00263
50,585 SBL-ODS-50585
ODS
264 SBL-ODS-00264 50,588 SBL-ODS-50588 265 SBL-ODS-00265 266 SBL-ODS-00266 267 SBL-ODS-00267
ODS ODS
50,263 SBL-ODS-50263 50,264 SBL-ODS-50264 50,265 SBL-ODS-50265 50,266 SBL-ODS-50266 50,267 SBL-ODS-50267 50,268 SBL-ODS-50268 50,269 SBL-ODS-50269 50,270 SBL-ODS-50270 50,271 SBL-ODS-50271 50,272 SBL-ODS-50272 50,273 SBL-ODS-50273 50,274 SBL-ODS-50274 269 SBL-ODS-00269 270 SBL-ODS-00270
ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS
52 of 117
Message Text Access Denied: You do not have the required access to create a private Smart Call. Please contact your administrator if you feel you have received this message in error. Access Denied: You do not have the required access to create a public Smart Call. Please contact your administrator if you feel you have received this message in error. Waiting on someone else List layout supports at most %1 columns. A list layout must be defined with at least one column. The sort column of a list layout must be visible on the list. Either the Opportunity or Contact record is missing. Step 3: The field %1 is a required field. Please move it to one of the adjacent windows Ambiguous root Business Component "%1" in the Adapter Service request Business Component "%1" specified in the Adapter Service request does not exist in Business Object "%2" Property "%1" has an illegal value: "%2". Specification of field "%1" is illegal in this context. Method "%1" is invalid. Missing Business Component name in the Adapter Service request Missing Business Object name in the Adapter Service request No Id value specified in the Adapter Service request Parent Business Component "%1" not specified in the Adapter Service request More records found than expected in the Adapter Service request Not all records specified in the Adapter Service request have been found No field values specified in the Adapter Service request Role '%1' cannot be deleted, because the Role is currently associated with one or more user. Role '%1' not found. Translation record for specified role already exists. Cannot create translation record.
Error Message #
Error Code
447 SBL-ODS-00447
448 SBL-ODS-00448
ODS
50,387 SBL-ODS-50387 50,388 SBL-ODS-50388 50,389 SBL-ODS-50389 50,390 SBL-ODS-50390 271 SBL-ODS-00271 272 SBL-ODS-00272
ODS ODS
275 SBL-ODS-00275 276 SBL-ODS-00276 277 SBL-ODS-00277 278 SBL-ODS-00278 279 SBL-ODS-00279 280 SBL-ODS-00280 281 SBL-ODS-00281 282 SBL-ODS-00282 283 SBL-ODS-00283 284 SBL-ODS-00284 285 SBL-ODS-00285
ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS
ODS ODS
53 of 117
Message Text Translation record for specified role does not exist. The root Business Component "%1" is not the primary Business Component for Business Object "%2" The business service "%1" does not exist You do not have permission to change the Status or Published fields. Your company name is incorrect (Company: %1). Please contact your company administrator for more information. The given External Identifier for Single Sign-On is already being used - please choose another. Invalid operation for an account or company configured for Single Sign-On only. Your account does not exist or has not been configured for Single Sign-On (User: %1). Please contact your company administrator for more information. The subject "%1" has already been registered with the system. The subject "%1" does not exist The business component %1 is not properly configured for multilingual operations. Values starting and ending with square brackets cannot be used: '%1'. They are reserved for use by the application for translation purposes. Could not retrieve the '%1' field definition for buscomp '%2' The language parameter is missing. The buscomp '%1' cannot find expected translation for element id '%2'. Expected original translations are missing for buscomp '%1', element id '%2'. Creation of new custom elements is not allowed in languages other then company's default. Uncommitted records at the end of the Adapter Service request Business Object "%1" is not supported by the handler for Business Component "%2" Business Service Method "%1"::"%2" is not supported by the Business Service adapter Unsupported On Demand PIM sync request type
Error Message #
Error Code
469 SBL-ODS-00469
ODS
ODS ODS
50,420 SBL-ODS-50420 50,421 SBL-ODS-50421 50,422 SBL-ODS-50422 50,423 SBL-ODS-50423 50,424 SBL-ODS-50424
54 of 117
Message Text Unsupported On Demand PIM sync object type Handler Service "%1" does not support the request "%2" A workflow rule can only have up to 25 actions The entered event is not valid for the current action Field Name is empty in "Update Field" action Runtime Event Service can not be executed on PostDelete Event Unable to evaluate workflow rule %1 for the following reason: %2 Failed to adjust quota '%1' to a new quantity of %2. An operation specified the quota charge '%1', which is not known to the system. An error occurred attempting to charge quota '%1' %2 units. An error occurred attempting to create a new quota charge. Failed to create quota '%1' with available quantity of %2. Failed to delete quota '%1'. Adjusting quota '%s' to a quantity of %d. Checking quota '%s' for a request to allocate %d units. Completed successfully. Creating quota '%s' with quantity of %d. Deleting quota '%s'. Updated the expiration of quota charge '%s' to %s. Inserted quota charge '%s' into the cache. Removed quota charge '%s' from the cache. Quota charge '%s' was reclaimed. Releasing quota charge '%s'. Renewing lease on quota charge '%s'. Initialization of '%1' failed. REQUEST DENIED: Quota '%1' does not have sufficient available quota. An operation specified the quota '%1', which is not known to the system. An error occurred attempting to release the quota charge '%1'. An error occurred attempting to release quota charge '%1'. An error occurred attempting to renew the lease on quota charge '%1'.
Error Message #
Error Code
Message Facility ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS
298 SBL-ODS-00298 299 SBL-ODS-00299 50,743 SBL-ODS-50743 50,744 SBL-ODS-50744 50,735 SBL-ODS-50735 50,734 SBL-ODS-50734 500 SBL-ODS-00500 300 SBL-ODS-00300 301 SBL-ODS-00301 302 SBL-ODS-00302 303 SBL-ODS-00303 304 SBL-ODS-00304 305 SBL-ODS-00305 306 SBL-ODS-00306 307 SBL-ODS-00307 308 SBL-ODS-00308 309 SBL-ODS-00309 310 SBL-ODS-00310 311 SBL-ODS-00311 312 SBL-ODS-00312 313 SBL-ODS-00313 314 SBL-ODS-00314 315 SBL-ODS-00315 316 SBL-ODS-00316 317 SBL-ODS-00317 318 SBL-ODS-00318 319 SBL-ODS-00319 320 SBL-ODS-00320 321 SBL-ODS-00321 322 SBL-ODS-00322
55 of 117
Message Text A database operation could not be completed because the maximum number of retries has been exceeded. Synchronizing all web services session quotas with the session limits set in the organization profiles. Checking session limit for organization '%s'. Created session quota charge '%s' against organization '%s'. Creating session quota for organization '%s' with a limit of %d sessions. Releasing session quota for quota charge '%s' Generated quota key '%s' for organization '%s'. An error occurred attempting to lookup the session limit for the organization '%1'. An operation specified the organization '%1', which is not known to the system. An operation specified the organization '%1', which is either not active or not web services enabled. Did not set value %1 for field %2. You do not have visibility to this field. Did not set value %1 for field %2. You only have read-only access to this field. The following characters in the [%1] field were replaced with a question mark when sent to your PIM: %2 Several characters in the [%1] field were replaced with a question mark when sent to your PIM, including: %2 Warning Message Failed to write record because a value was missing for required field %1. %1 Log File\r\n\r\nUser's Email Address: %2\r\nDate of last sync session: %3\r\n\r\n Calendars Contacts Tasks Parent '%1' doesn't exist in the database. Parent '%1' is in deleted items. Please restore the parent first. The record you are trying to restore from the recycle bin has the same values as a record that already exists. If you want to restore this record, please modify the existing record to ensure that the field values are unique. This record can not be deleted.
Error Message #
Error Code
323 SBL-ODS-00323
324 SBL-ODS-00324
ODS
325 SBL-ODS-00325 326 SBL-ODS-00326 327 SBL-ODS-00327 328 SBL-ODS-00328 329 SBL-ODS-00329 330 SBL-ODS-00330 331 SBL-ODS-00331 332 SBL-ODS-00332
50,429 SBL-ODS-50429
ODS
50,442 SBL-ODS-50442 50,443 SBL-ODS-50443 333 SBL-ODS-00333 50,444 SBL-ODS-50444 50,445 SBL-ODS-50445 50,446 SBL-ODS-50446 334 SBL-ODS-00334 335 SBL-ODS-00335 50,447 SBL-ODS-50447
336 SBL-ODS-00336
ODS
56 of 117
Message Text The provided record type is not currently supported by the merge operation. Please refer to the latest version of the On Demand Web Services Guide for a list of supported record types Access to Folder/Web group %1 is denied Authentication Error Authentication Error Folder %1 is not found Web group %1 is not found Account %1 is invalid SOAP call failed because of other reasons The request to Analytics SOAP server %1 timed out The Analytics SOAP server %1 is not available You cannot link a solution to a closed service request. To link this solution to this service request, change the status of the service request to reopen it, and try again. Company [%1] in location [%2] already exists, please use a different company name or location to signup! Failed to send email to "%1", please make sure you use an valid email address. Accepting the Terms of Use is required to continue. "%1" is already being used by another user. Please use a different email address to sign up. "%1" is being used more than once in your sign up. Each Siebel CRM On Demand user must have a separate and unique email address. Please make the changes and try again. "%1" is being used more than once in your sign up. Each Siebel CRM On Demand user must have a separate and unique user ID. Please make the changes and try again. "%1" is already being used by another user. Please use a different user ID to sign up. A request to the Transaction Queue is already in progress for your company. You must wait for that request to complete. Invalid Time Zone. Please enter a valid time zone. You cannot generate a password for an inactive user
Error Message #
Error Code
50,633 SBL-ODS-50633
458 SBL-ODS-00458 457 SBL-ODS-00457 470 SBL-ODS-00470 456 SBL-ODS-00456 455 SBL-ODS-00455 474 SBL-ODS-00474 454 SBL-ODS-00454 453 SBL-ODS-00453 452 SBL-ODS-00452 337 SBL-ODS-00337
ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS
342 SBL-ODS-00342
ODS
346 SBL-ODS-00346
ODS
476 SBL-ODS-00476
ODS
ODS ODS
ODS ODS
57 of 117
Message Text A manager cannot report to a subordinate who all reports to them in the hieararchy You have exceeded the number of licenses for your company. Please contact your Siebel CRM On Demand Sales Representative to discuss licensing options. Web service usage logging internal error: '%1' The transcode facility was not able to convert the output stream into a string. As a result, error messages in the current Web Service invocation cannot be logged. Web service usage log facility was not properly initialized and usage logging is disabled for this session: no corresponding login entry is found for user '%1', organization id '%2'. Not allowed to perform a data import or export when using Impersonate Admin. Instead, please use Impersonate User with a user having sufficient privileges. A record type cannot be both the parent and the child of the same record type. For example, if account A is the parent of account B, then account B cannot be the parent of account A.
Error Message #
Error Code
ODS ODS
351 SBL-ODS-00351
ODS
352 SBL-ODS-00352
ODS
50,448 SBL-ODS-50448
ODS
%1 added the following values to the picklist for field '%2': Value = '%3' Unable to accept import request because you already have a pending request for the same type of import. The field name '%1' in your CSV file exceeds the maximum length allowed for a field name. Please reduce the length of the field name and verify that none of the other field names exceed the limit of %2 characters before continuing with your import. %1 was unable to import the row due to the following error: The fields '%2' and '%3' failed the cascading picklist validation. Error changing record owner for the following record(s): The selected data file contains a blank field in the header. Please make sure that the header contains field names. The selected file is not a valid data file. Please select a valid data file and try again.
ODS ODS
364 SBL-ODS-00364
ODS
50,653 SBL-ODS-50653
ODS
ODS ODS
367 SBL-ODS-00367
ODS
58 of 117
Message Text The selected data file only contains your field names. Please make sure that it also contains your data. Unable to initialize CSV reader. %1 field '%2' was not specified. The default %3 value was applied to this field. Please note that you have mapped the following Siebel CRM On Demand fields more than once: The following records failed to be imported because an error has occurred when checking for duplicates: A record that contains identical values to the record you have created already exists. If you would like to enter a new record, please ensure that the field values are unique. WARNING: Duplicates are found and the import process has created the following additional records: A duplicate has been found. The import process will ignore this record. A duplicate has been found. The import process will overwrite this record. An error occurred during import, and the following record(s) were not imported: Value '%1' for import field '%2' was an invalid format for the %3 field '%4'. This value was not imported, but other field values were imported for this record. Valid format for this field is 'a@b.c'. The '%1' '%2' was after the '%3' '%4' for this record. This record was not imported. We could not properly validate your file due to an internal error. Please contact your customer representative. We are sorry to the inconvenience. The value for the currency field exceeded the 15digit limit. This value was not imported. Value '%1' for import field '%2' was an invalid format for the Siebel CRM On Demand field '%3'. This value was not imported, but other field values were imported for this record. Value '%1' for import field '%2' was an invalid format for the %3 field '%4'. The correct format is '%5'. This value was not imported, but other field values were imported for this record.
Error Message #
Error Code
368 SBL-ODS-00368
371 SBL-ODS-00371
ODS
372 SBL-ODS-00372
ODS
373 SBL-ODS-00373
ODS
ODS ODS
ODS ODS
382 SBL-ODS-00382
ODS
59 of 117
Message Text Value '%1' for import field '%2' was too long for the %3 field '%4'. %3 imported the field value up to the field length limit. Please note that you have not mapped the following data file fields: The value '%1' for field '%2' is required to be '%3'. Please enter a value that is '%4'. Due to an internal error, we cannot proceed with your import request. Please contact your customer service representative. An unexpected error occurred during the import of field %1, with value of %2. An unexpected error occurred during the import of the following row: '%1' The value '%1' for import field '%2' cannot be set when the value of %3 field '%4' is not: '%5'. This value was not imported, but other field values were imported for this record. Business Component field definition for field '%1' is invalid. User Sign In ID '%1' specified for Owner is not valid. You may need to create a new User Sign In ID or check the spelling of the one specified and then re-import this record. Owner External ID value '%1' does not correspond to a valid user. Please make sure that the corresponding user is valid and then reimport the following records: Did not process the import request because the request status is invalid: %1 More than one associated '%1' record exists with value '%2' for the import field '%3'. Since this information is part of the unique identifier for %4 imports, the record has been rejected. An associated '%1' record with value '%2' for the import field '%3' could not be found. Since this information is part of the unique identifier for %4 imports, the record has been rejected. The request cannot be deleted because it is currently being processed. %1 was unable to import the multi-select picklist values '%2' because one or more of its values did not belong to the set of available values. You may want to update the multi-select picklist values for field '%3'
Error Message #
Error Code
383 SBL-ODS-00383
ODS ODS
385 SBL-ODS-00385
ODS
ODS ODS
387 SBL-ODS-00387
ODS
ODS ODS
50,550 SBL-ODS-50550
ODS
ODS ODS
60 of 117
Message Text More than one matching record is found for the import field '%1' with value '%2'. The %3 field '%4' was not updated, but other field values were imported for this record. The import process failed to find the specified parent account. A new account was created with the following name:'%1'. No matching record has been found. The import process will ignore this record. Unable to resubmit the request. The request has already been processed successfully. Unable to resubmit the request. It appears that the request is currently being processed. At least one of the following fields need to be mapped for a Notes Import: %1 was unable to import the value '%2' for import field '%3' because the value '%4' does not match the pre-defined, uneditable picklist values of the %1 field '%5'. Please correct the value with one from the predefined picklist values and perform the imp %1 was unable to import the value '%2' for import field '%3' because the value '%4' does not match the pre-defined, uneditable picklist values of the %1 field '%5'. No matching record is found for import field '%1' with value '%2'. The %3 field '%4' was not updated, but other field values were imported for this record. You have not mapped the Owner field. If you do not map this field, all new records will be assigned to you. Value '%1' for import field '%2' was out of numeric range for the Siebel CRM On Demand field '%3'. This value was not imported, but other field values were imported for this record. The value '%1' for import field '%2' does not fall within the range of '%3 - %4' for %5 field '%6'. This value was not imported, but other field values were imported for this record. Unable to import the record because multiple duplicated records are found in the database.
Error Message #
Error Code
389 SBL-ODS-00389
50,458 SBL-ODS-50458
ODS
392 SBL-ODS-00392
ODS
393 SBL-ODS-00393
ODS
50,578 SBL-ODS-50578
ODS
394 SBL-ODS-00394
ODS
395 SBL-ODS-00395
ODS
50,459 SBL-ODS-50459
ODS
396 SBL-ODS-00396
ODS
397 SBL-ODS-00397
ODS
61 of 117
Message Text An error occurred while creating an associated record for %1 field '%2', the value '%3' already exists. The value for %1 field '%4' could not be imported. An error occurred while creating an associated record for Siebel CRM On Demand field '%1', the value '%2' prevented the associated record from being created. The value for Siebel CRM On Demand field '%3' could not be imported. An error occurred while creating an associated record for Siebel CRM On Demand field '%1', the value '%2' does not match any value in the pre-defined picklist. The value for Siebel CRM On Demand field '%3' could not be imported. An error occurred while creating an associated record for Siebel CRM On Demand field '%1', the value '%2' was too long. The value for Siebel CRM On Demand field '%3' could not be imported. An error occurred while creating an associated record for Siebel CRM On Demand field '%1', the record could not be saved due to an internal error. The value for Siebel CRM On Demand field '%2' could not be imported. Unable to set picklist value '%1' of import field '%2' for the %3 field '%4'. The picklist value '%1' is currently disabled. Unable to set picklist value '%1' of import field '%2' for the %3 field '%4'. %3 picklist values must be 30 characters or less in length. %1 was unable to import the value '%2' for import field '%3'. The value '%4' does not match the pre-defined picklist values of the %1 field '%5'. You may want to update the picklist values of the %1 field '%6'. Unable to accept import request because the import quota has been exceeded. An error occurred while reloading the record counts for crash recovery. You need to map the following required fields for Siebel CRM On Demand: Unable to import the record because required fields are empty.
Error Message #
Error Code
398 SBL-ODS-00398
399 SBL-ODS-00399
ODS
400 SBL-ODS-00400
ODS
401 SBL-ODS-00401
ODS
402 SBL-ODS-00402
ODS
50,750 SBL-ODS-50750
ODS
403 SBL-ODS-00403
ODS
404 SBL-ODS-00404
ODS
62 of 117
Message Text Import field '%1' had a blank value for the required %2 field '%3'. This record was not imported. Please enter desired values for the required fields and re-import this record. Import field '%1' had an invalid value for the required %2 field '%3'. This record was not imported. Please enter desired values for the required fields and re-import this record. Error setting address fields. Unable to import record. Unable to set value '%1' of import field '%2' for the %3 field '%4'. Unable to set value for the %1 field '%2'. The following %1 field(s) are required to mark a lead as '%3': %4. Please make sure these fields contain proper values. This record was not imported. Unable to set parent context for this record. Please make sure that the parent record is valid and you have permission to modify the parent record. Error setting address fields for parent record. Unable to create parent record. The data file exceeds the limit of %1 records. Please press the Previous button and split the current data file into multiple files, each with no more than %1 records, and try importing again. Value '%1' for import field '%2' was truncated to %3 characters when imported to the %4 field '%5'. Unable to retrieve user information: '%1' Unable to import the following user records because the number of active users has exceeded the number of licenses for your company. Please contact your %1 Sales Representative to discuss licensing options. Unable to save changes to the existing record. The selected record has been modified by another user since it was retrieved. Error saving changes to the following record(s): Failed to create field mapping file. Duplicate Records: Duplicate Records Ignored: Duplicate Records Overwritten: ERROR: Failed:
Error Message #
Error Code
408 SBL-ODS-00408
409 SBL-ODS-00409
ODS
413 SBL-ODS-00413
ODS
ODS ODS
416 SBL-ODS-00416
ODS
ODS ODS
418 SBL-ODS-00418
ODS
419 SBL-ODS-00419 50,462 SBL-ODS-50462 50,463 SBL-ODS-50463 50,464 SBL-ODS-50464 50,465 SBL-ODS-50465 50,466 SBL-ODS-50466 50,467 SBL-ODS-50467
63 of 117
Message Text GENERAL ERRORS GENERAL WARNINGS Line %1 No Matching Records Ignored: Partially Imported: RECORD: RECORD-SPECIFIC ERRORS RECORD-SPECIFIC WARNINGS Successfully Imported: IMPORT SUMMARY Total Records: WARNING: You have selected the format '%1' for the date values in your CSV. Using the current date and time as an example, Siebel CRM On Demand will expect that all date values appear in the form '%2'. The data file has been validated. The field mappings have been validated. Y/N - True/False - Checked/Unchecked - T/F 1/0 Please update the field value(s) and re-import just this record with the 'Overwrite Existing Record' option. An internal error occurred loading log message (%1). Please contact %2. Your request has been completed. Your import request resumed after experiencing a technical difficulty. Some records may have been processed more than once. Your import request was temporarily interrupted due to a technical difficulty. A new log file will be generated when it resumes. This lead has already been converted to opportunity %1. Please see %1 for reference. Manage Integration Event Queue You can not edit or delete this record because you have read-only access. Only Forecast owners can update their Forecasts. Please contact the Forecast owner to make an update. The business component specified in the layout is invalid. The Between operation requires two values in the list of values
Error Message #
Error Code
Message Facility ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS
50,468 SBL-ODS-50468 50,469 SBL-ODS-50469 50,470 SBL-ODS-50470 50,548 SBL-ODS-50548 50,471 SBL-ODS-50471 50,472 SBL-ODS-50472 420 SBL-ODS-00420 50,473 SBL-ODS-50473 50,474 SBL-ODS-50474 50,475 SBL-ODS-50475 50,476 SBL-ODS-50476 50,477 SBL-ODS-50477 421 SBL-ODS-00421
481 SBL-ODS-00481
ODS
422 SBL-ODS-00422
ODS
ODS ODS
64 of 117
Message Text Contains operations require at least one value in the list of values Invalid Filter Value. Please use Show Values to verify that all your filter values are correct. The operation %1 is not supported in this context. Please select another operation. Load Request Completed Load Request Error Successfully Loaded: LOAD SUMMARY %1 Default Access Profile Load File Name Load Type Did not process the export request because the request status is invalid: '%1' %1 Owner Access Profile The layout is currently assigned to one or more Dynamic Layouts. Please reassign a different layout to those Dynamic Layouts before deleting this layout. The layout is currently assigned to one or more Roles. Please reassign a different layout to those roles before deleting this layout. System is unable to complete your search. Please try again. If the problem persists, then contact customer service. The date range you entered was invalid. The "From:" Date must occur before the "To:" Date. Please correct and try your search again. Your search included invalid symbols, such as "," or ")", or invalid commands, such as "NOT". Use the search wildcard "*" or put quotation marks around your keywords, and try again. Search is in progress... Please select at least one record type. '%1' not found in %2. No rows returned from search for this object. System is busy. Please try again. Another Integration Event request is being processed. Only one Integration Event request is allowed. You have read-only access to this record. Click Cancel button or Back link to continue. Access Denied.
Error Message #
Error Code
Message Facility ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS ODS
432 SBL-ODS-00432 477 SBL-ODS-00477 433 SBL-ODS-00433 50,531 SBL-ODS-50531 50,532 SBL-ODS-50532 50,530 SBL-ODS-50530 50,535 SBL-ODS-50535 50,715 SBL-ODS-50715 50,528 SBL-ODS-50528 50,527 SBL-ODS-50527 50,544 SBL-ODS-50544 50,716 SBL-ODS-50716 496 SBL-ODS-00496
497 SBL-ODS-00497
ODS
434 SBL-ODS-00434
ODS
435 SBL-ODS-00435
ODS
436 SBL-ODS-00436
ODS
50,483 SBL-ODS-50483 437 SBL-ODS-00437 438 SBL-ODS-00438 439 SBL-ODS-00439 440 SBL-ODS-00440 506 SBL-ODS-00506
50,002 SBL-ODU-50002
ODU
65 of 117
Message Text Select a |Book~Singular| and specify assignment and \''{0}\'' options. When removing or replacing |Book~Plural|, \''{0}\'' determines the records to which the specified assignment option will apply. Manual Association affects records that are manually a {0}: The specified |Book~Singular| is added to the selected records. {0}Helpful Hints on Using {1}{2}: {0}: The specified |Book~Singular| is removed from the selected records. {0}: All |Book~Plural| currently associated are removed from the selected records. {0}: The specified |Book~Singular| is added and existing |Book~Plural| of the same |Book~Singular| type are removed from the selected records. {0}: The specified |Book~Singular| is added and all existing |Book~Plural| of any |Book~Singular| type are removed from the selected records. {0}: The specified |Book~Singular| (at the top) is added while the |Book~Singular| specified next to this assignment option is removed from the selected records; records that are not already associated with the |Book~Singular| being removed are skipped. This |Activity~Singular| has already been wrapped up. You cannot discard an email that has already been discarded or wrapped up You are not currently connected to Siebel Call Center On Demand. Please wait to attempt this action again until you have established a connection. Contact your Administrator if you continue to experience problems. Instruction for the Call Center On Demand |Activity~Plural| List view... Call Center On Demand |Activity~Singular| List The Call Center On Demand Email cannot be found. Please contact your Administrator to have this issue resolved with CRM On Demand Customer Support.
Error Message #
Error Code
56,842 SBL-ODU-56842
56,898 SBL-ODU-56898 56,843 SBL-ODU-56843 56,902 SBL-ODU-56902 56,903 SBL-ODU-56903 56,899 SBL-ODU-56899
56,900 SBL-ODU-56900
ODU
56,901 SBL-ODU-56901
ODU
66 of 117
Message Text The Call Center On Demand dashboard cannot be found. Please contact your Administrator to have this issue resolved with CRM On Demand Customer Support. Your New Password Must Be Different Than Your Old Password Please ensure that the company's <span style=\"font-weight:bold\">{0}</span> selection is correct as this will impact the company's financial reporting and time-based analyses. Once saved this information cannot be modified. selection is correct as this will impact the company's financial reporting and time-based analyses. Once saved this information cannot be modified. Any fields noted as read-only below indicate you do not have edit privileges to change these field values. If you would like to change these values, please contact Customer Care for assistance. This alert has been sent to you by your company The download link is currently unavailable. Please try again later or contact your Administrator. Invalid Web Link Display value for field %1. Invalid Web Link URL definition for field %1. That account does not have permission to sign in to this application. Your account is disabled. Please contact your Administrator to enable your account. Your account is locked out due to too many sign in attempts. Please wait {0} and try again. If you still cannot sign-in to your account after repeated attempts, please contact your company administrator to reset your password. Your account is locked out due to too many sign in attempts. Please contact your company administrator to reset your password. Your Siebel CRM On Demand account has been closed. In order to continue using the service, please contact your Siebel CRM On Demand sales representative.
Error Message #
Error Code
51,423 SBL-ODU-51423
ODU ODU
51,546 SBL-ODU-51546
ODU
51,547 SBL-ODU-51547
ODU
ODU ODU
52,509 SBL-ODU-52509 52,510 SBL-ODU-52510 152 SBL-ODU-00152 153 SBL-ODU-00153 154 SBL-ODU-00154
155 SBL-ODU-00155
ODU
156 SBL-ODU-00156
ODU
67 of 117
Message Text You are not authorized to use Single Sign-On with your account (User: {0}). Please contact your company administrator for more information. You are not authorized to sign in through this page. Please go to your company's portal page, or contact your company administrator for more information. Unknown user sign in ID or password. Make sure your CapsLock key is off, and try again. Either the server is currently unavailable, or there was an error with your authentication. Please close your browser and try again. You have not been granted Internal Admin Impersonation access to this account. Your company policy dictates that you may not sign in from your current network location. Contact your company's Siebel CRM On Demand Administrator or Customer Care for details. Both a user sign in ID and a password must be given. Your current password has expired. Please change your password online and attempt to sign in again. Your current password is temporary. Please change your password online and attempt to sign in again. Your password has expired. Please contact your company administrator. Your password is temporary and must be changed. Please contact your company administrator. Your company has not yet accepted the Terms Of Use Agreement. This agreement must be accepted by your company's designated administrator before other users can sign in. Please contact your designated administrator and ask them to sign in and accept the Te Your session has timed out due to inactivity. Your free 30 day Siebel CRM On Demand trial has expired. In order to continue using the service, please contact your Siebel CRM On Demand sales representative. Unknown Sign In error. Please try again later or contact Customer Care for more information.
Error Message #
Error Code
241 SBL-ODU-00241
240 SBL-ODU-00240
ODU
157 SBL-ODU-00157
ODU
158 SBL-ODU-00158
ODU
ODU ODU
ODU ODU
52,636 SBL-ODU-52636
ODU
ODU ODU
161 SBL-ODU-00161
ODU
ODU ODU
52,639 SBL-ODU-52639
ODU
68 of 117
Message Text Internal Error: Unknown result code Your account has been renamed. Please sign in using your new credentials. Sign In failed with Internal Administration Sign In Your User Sign In ID: Impersonatee User Sign In ID: Your Password: Company Admin Impersonation Sign In Please enter your Email Address and Password, and the Email address of the company administrator you would like to impersonate. User Impersonation Sign In Please enter your Email Address and Password, and the Email address of the User you would like to impersonate. Password: Remember My User Sign In ID Session No Longer Active Please enter your user sign in ID and password to access your account. Sign In Your session has timed out due to inactivity. Please wait while we reconnect your session... Sign In Error: Customer Care Click here to sign your company up for a free 30 day trial! Trial{0}Sign{0}Up The Siebel CRM OnDemand Service is not responding. Please wait 10 minutes before attempting to reconnect. Please contact your Administrator if sign in problems persist. A SqlServer database error has occurred. Possibly the database name is invalid. A database error occurred. Please continue or contact your systems administrator if the problem persists. The business object \"{0}\" is not valid The method name \"{0}\" is not valid The row id \"{0}\" is not valid The method target name \"{0}\" is not valid Missing required target for method \"{0}\" \"{0}\" is not available on this page Too many context business objects were defined on the URL
Error Message #
Error Code
Message Facility ODU ODU ODU ODU ODU ODU ODU ODU ODU
164 SBL-ODU-00164 52,640 SBL-ODU-52640 165 SBL-ODU-00165 52,641 SBL-ODU-52641 52,642 SBL-ODU-52642 52,643 SBL-ODU-52643 52,644 SBL-ODU-52644 52,645 SBL-ODU-52645 52,646 SBL-ODU-52646
ODU ODU
52,649 SBL-ODU-52649 56,426 SBL-ODU-56426 52,650 SBL-ODU-52650 52,651 SBL-ODU-52651 52,652 SBL-ODU-52652 52,653 SBL-ODU-52653 52,654 SBL-ODU-52654 52,657 SBL-ODU-52657 56,817 SBL-ODU-56817 52,658 SBL-ODU-52658 52,659 SBL-ODU-52659 52,660 SBL-ODU-52660
ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU
166 SBL-ODU-00166
ODU
167 SBL-ODU-00167 168 SBL-ODU-00168 169 SBL-ODU-00169 170 SBL-ODU-00170 171 SBL-ODU-00171 172 SBL-ODU-00172 173 SBL-ODU-00173
69 of 117
Message Text Too many methods were defined on the URL Too many instances of a context row id were defined on the URL Too many method targets were defined on the URL The control \"{0}\" does not support the method \"{1}\" The method \"{0}\" is not supported by this page The method target \"{0}\" is not supported by this page Unable to format \"{0}\" due to a system error Validation Error: Input file is empty or not found. The file you uploaded is too large. Max size allowed is {0} MB. Can't find {0} Duplicated @ Must not be empty Error Exceeds Field Limit of 15 Digits Valid email required Invalid value A malformed URL was detected Missing @ Missing dot No characters after dot No characters before @ No characters between @ and dot No characters between dots Must be between {0} and {1} Unable to parse \"{0}\" due to a system error Must be less than {0} characters Must be more than {0} characters An error occurred processing this command. Unable to read user information. Error in the business logic server. Error connecting to the business logic server. Error communicating with the business logic server. Error constructing the request for the business logic server. This screen is not accessible. Contact your company administrator for access. This view is not accessible. Contact your company administrator for access. Element is not found!
Error Message #
Error Code
Message Facility ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU
174 SBL-ODU-00174 175 SBL-ODU-00175 176 SBL-ODU-00176 177 SBL-ODU-00177 178 SBL-ODU-00178 179 SBL-ODU-00179 180 SBL-ODU-00180 52,673 SBL-ODU-52673 181 SBL-ODU-00181 182 SBL-ODU-00182 183 SBL-ODU-00183 184 SBL-ODU-00184 185 SBL-ODU-00185 186 SBL-ODU-00186 187 SBL-ODU-00187 188 SBL-ODU-00188 189 SBL-ODU-00189 190 SBL-ODU-00190 191 SBL-ODU-00191 192 SBL-ODU-00192 193 SBL-ODU-00193 194 SBL-ODU-00194 195 SBL-ODU-00195 196 SBL-ODU-00196 197 SBL-ODU-00197 198 SBL-ODU-00198 199 SBL-ODU-00199 200 SBL-ODU-00200 201 SBL-ODU-00201 202 SBL-ODU-00202 203 SBL-ODU-00203 204 SBL-ODU-00204 205 SBL-ODU-00205 52,674 SBL-ODU-52674 52,675 SBL-ODU-52675 206 SBL-ODU-00206
70 of 117
Message Text The record you are trying to access has been deleted or has been assigned a new owner and you no longer have access to it. If you deleted the record, it may be accessed in Deleted Items. If you continue to have problems contact your Siebel CRM On Demand The requested operation has encountered an error. Processing... The requested operation has timed out. Error! Mistmatched name/value arrays Close You must select at least one displayed value before continuing. An error occurred while collapsing the applet. Please try again. <Custom Field> Are you sure you want to remove the current value? Expanding... An error occurred while expanding the applet. Please try again. An error occurred while communicating with the server. Please try again. The field %1 is read-only. This field is required: Please specify a value. Click to edit the value. Your edit requires you to fill out another field.\nWould you like to navigate to the Edit page to make both changes? Invalid data format. Invalid data format: Please use the format %1. Invalid text length: This field only accepts %1 characters. You can Mass Update up to 50 records at a time. Please reduce the number of records displayed on the list page to 50 before proceeding. You can change the number of records displayed by using the control at the bottom of the page. You have left the values for some of the fields empty. Proceeding will clear any existing values for those fields on the records you have selected. There are no records in the list. You must have at least one record to perform mass update
Error Message #
Error Code
52,688 SBL-ODU-52688
251 SBL-ODU-00251 57,007 SBL-ODU-57007 252 SBL-ODU-00252 52,876 SBL-ODU-52876 52,877 SBL-ODU-52877 56,478 SBL-ODU-56478 253 SBL-ODU-00253 52,878 SBL-ODU-52878 52,879 SBL-ODU-52879 56,732 SBL-ODU-56732 254 SBL-ODU-00254 255 SBL-ODU-00255 256 SBL-ODU-00256 257 SBL-ODU-00257 56,722 SBL-ODU-56722 56,723 SBL-ODU-56723
ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU
56,160 SBL-ODU-56160
ODU
55,748 SBL-ODU-55748
ODU
71 of 117
Message Text You must select at least one record to update before proceeding The selected primary and duplicate records cannot be the same. You must select a primary and duplicate record in order to proceed. Checking 'Mark for Translation' overwrites both the 'Display Name' and 'Field Validation Error Message' in all other languages. Are you sure you want to continue? An error occurred while navigating to a new page. Please try again. Element is not found! You must select at least one field to update before proceeding Warning: Allowing users to open |Attachment~Plural| directly from the application (instead of first saving them to disk and then opening) can expose users to security risks. It is recommended that you do not enable this option unless you understand the Error! Mistmatched name/value arrays Manage Lists. Show full list. View Calendar. Print To maximize the page layout when printing, select landscape orientation from your printer preferences Remove Server is busy. Please try again later. The value for field 'End Time' is required to be '>= Start Time' Invalid field/condition selection. Condition cannot be used with selected field. Are you sure you want to delete this action? Are you sure you want to delete this workflow and its related actions? Record type must be selected before defining a workflow rule. {0}Equal to{1}: returns records that exactly match the {2}one{3} value defined in the filter (comma separators do not apply). Field:
Error Message #
Error Code
52,881 SBL-ODU-52881 52,882 SBL-ODU-52882 52,883 SBL-ODU-52883 52,884 SBL-ODU-52884 52,885 SBL-ODU-52885 52,886 SBL-ODU-52886
56,976 SBL-ODU-56976 56,742 SBL-ODU-56742 52,887 SBL-ODU-52887 52,888 SBL-ODU-52888 52,889 SBL-ODU-52889 57,167 SBL-ODU-57167 57,164 SBL-ODU-57164 261 SBL-ODU-00261 52,924 SBL-ODU-52924
52,925 SBL-ODU-52925
ODU
72 of 117
Message Text Missing information: When specifying a filter, you must complete each filter column including field selection, condition and an appropriate filter value. Create List Wizard: Fund Request List Create List Wizard: Fund List {0}Greater than{1}: returns records containing a value greater than the filter value. Create List Wizard: Group List {0}{1}Helpful Hints on Using Conditions{2}{3}: Create List Wizard: Households List {0}In the last 90 days{1}: returns records containing a date value in the last 90 days. {0}In the next 90 days{1}: returns records containing a date value in the next 90 days. Use the rows in the following table to create one or more filters for your new list. In the Filter Value(s) fields, separate multiple items with a comma (for example: John, Sally). All filter values are case sensitive. Select the default sort field and sort order for your custom list. For quicker results, choose an optimized field used for your Search Criteria. Unsorted list results are returned the fastest. Error: Invalid boolean value specified. Valid boolean values are 'Y' or 'N'. Error: Invalid Date value specified for field \"{0}\"
Error Message #
Error Code
55,833 SBL-ODU-55833
52,926 SBL-ODU-52926 52,927 SBL-ODU-52927 52,928 SBL-ODU-52928 52,929 SBL-ODU-52929 52,930 SBL-ODU-52930 52,931 SBL-ODU-52931 52,932 SBL-ODU-52932 52,933 SBL-ODU-52933 52,934 SBL-ODU-52934
52,935 SBL-ODU-52935
ODU
ODU ODU
Error: Invalid Date/Time value specified for field \"{0}\" Error: Invalid Number value specified for field \"{0}\" Create List Wizard: |Lead~Plural| List Note: Your default currency does not have a valid exchange rate for this forecast date. The forecast is displayed in your company's corporate currency instead. The currency you selected does not have a valid exchange rate for this forecast date. The forecast has been displayed in your company's corporate currency instead.
55,913 SBL-ODU-55913 52,938 SBL-ODU-52938 52,939 SBL-ODU-52939 57,444 SBL-ODU-57444 56,241 SBL-ODU-56241
56,240 SBL-ODU-56240
ODU
73 of 117
Message Text Your Siebel PIM Sync On Demand software is out-of-date. You do not need to upgrade to the newest version to successfully sync, however, you may wish to do so to take advantage of |Product~Singular| enhancements. Please sign in to On Demand and go to My Your Siebel PIM Sync On Demand software is out-of-date. You must upgrade to the newest version in order to successfully sync. Please sign in to Siebel CRM On Demand and go to MySetup \ Data & Integration Tools \ Siebel PIM Sync On Demand to download the Invalid XML. Please try again later. If you keep receiving this message, please contact your customer support. Your Siebel On Demand Sync Server is down at this point. Please try again later. If you keep receiving this message, please contact the customer support. An exact match could not be found. Please select an appropriate record, or cancel this dialog. No records found. Duplicate Matches Found No Matches Found More than {0} values have been selected. This exceeds the maximum allowed. At least one value must be selected. This session is already logged in. HTTP request is too big. Can not invoke method '{0}'. '{1}' Empty HTTP request. (Session is expired). Malformed XML request. Error in method '{0}'. '{1}' Internal synchronization error. Invalid session. You have exceeded the number of sign in attempts. Please contact your company administrator to reset your password. You will not be able to sign in to the application until this process is completed. Please enter the password sent to you to activate your user account. This link contains an invalid token.
Error Message #
Error Code
53,003 SBL-ODU-53003
53,004 SBL-ODU-53004
ODU
53,005 SBL-ODU-53005
ODU
53,006 SBL-ODU-53006
ODU
56,696 SBL-ODU-56696
ODU
56,699 SBL-ODU-56699 56,697 SBL-ODU-56697 56,698 SBL-ODU-56698 53,276 SBL-ODU-53276 56,768 SBL-ODU-56768 53,399 SBL-ODU-53399 53,400 SBL-ODU-53400 53,401 SBL-ODU-53401 53,402 SBL-ODU-53402 53,403 SBL-ODU-53403 53,404 SBL-ODU-53404 53,405 SBL-ODU-53405 53,406 SBL-ODU-53406 55,732 SBL-ODU-55732
ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU ODU
ODU ODU
74 of 117
Message Text The URL you are attempting to access has expired. Please contact your company administrator to reset your password. You will not be able to sign in to the application until this process is completed. Temporary Access Sign In Either the temporary URL link or the password you received is invalid. Please contact your company administrator for assistance. You have exceeded the number of attempts to answer your security questions. Your account is now locked. Please contact your company administrator to reset your password. You will not be able to sign in to the application until this process is completed. Please enter the answers to the security questions below to reset your password. The answers you provided previously were incorrect, please answer the following questions. The URL you are attempting to access has expired. Password Reset Denied The combined length of Company Sign In ID and the User ID is 50 characters. You have exceeded this limit. Please revise the User ID. Your session has ended due to a time-out or server error. Please use a different list to perform your download. If you see this page, it means the OCCAM_CUSTOMER_CARE_SITE system property has not been set. This page is a placeholder for the Occam Customer Care Site. Occam Customer Care Site PlaceHolder Sign In Now Marketing Site If you see this page, it means the OCCAM_TRAINING_SITE system property has not been set. This request was interrupted by another request made by you. Please try your request again later.
Error Message #
Error Code
55,734 SBL-ODU-55734
ODU ODU
214 SBL-ODU-00214
ODU
ODU ODU
56,022 SBL-ODU-56022
ODU
54,177 SBL-ODU-54177
ODU
54,178 SBL-ODU-54178 54,179 SBL-ODU-54179 54,180 SBL-ODU-54180 54,181 SBL-ODU-54181 54,182 SBL-ODU-54182
268 SBL-ODU-00268
ODU
75 of 117
Message Text The server is currently busy processing a prior request for you. Please try your request again later. System unable to complete search. Please try again. If problem persists, contact customer service. Your search included invalid symbols, such as "," or ")", or invalid commands, such as "NOT". Use the search wildcard "*" or put quotation marks around your keywords, and try again. '{0}' not found in {1}. System is busy. Please try again. Use the up, down, left, and right directional buttons to move {0} fields to the section of the page you want the fields to display. Certain Large Text Box fields cannot be moved in Field Layout. The Siebel Server session was lost, and could not be recovered. The error was: The Siebel Server session was lost, and could not be recovered. The error was: User credentials have changed. This address already exists. Please associate the existing address by clicking "Add" or add a new address by clicking "New" and making the address unique. The referenced custom web content is no longer available, please contact your system administrator An invalid command was specified: {0} The HTTP request did not contain a valid SOAPAction header. The value of the header was {0} The HTTP request did not contain well-formed XML. An attempt to parse it produced the following error: {0} The content of elements must consist of wellformed character data or markup. The content of elements must consist of wellformed character data or markup. Permission to execute web services is not set for the user's organization. [No message here. The localized error message is taken from the exception thrown by Occam. The Message Key and #, however, are not available, so we use this message's.]
Error Message #
Error Code
267 SBL-ODU-00267
54,552 SBL-ODU-54552
ODU
54,553 SBL-ODU-54553
ODU
ODU ODU
55,159 SBL-ODU-55159
ODU
245 SBL-ODU-00245
ODU
ODU ODU
234 SBL-ODU-00234
ODU
56,024 SBL-ODU-56024
ODU
ODU ODU
76 of 117
Message Text The maximum rate of requests was exceeded. Please try again in {0} ms. Request exceeded the size limit of {0} KB. The maximum number of allowed simultaneous sessions has been exceeded. EAI DTD Wizard: Build tree node %1 EAI DTD Wizard: Create attribute field component, name is %1, real name is %2 EAI DTD Wizard: Create component data, name is %1 EAI DTD Wizard: Create element field component, name is %1, real name is %2 EAI DTD Wizard: Create PCDATA field component, PCDATA name is %1 EAI DTD Wizard: Component %1 has bad cardinality EAI DTD Wizard: Cannot build tree, root Node is %1 Element: %1 is not defined in DTD file EAI DTD Wizard: Invoke method is %1 EAI DTD Wizard: Create list item %1 EAI DTD Wizard: no memory available at %1 Start to build tree, root Node is %1 Start to parse file: %1 Entity: %1 is duplicated Graph has cycle at : %1 Duplicated entity Tree has cycle Parameter 'ReceiverMethodName' must be specified Parameter 'ReceiverServiceName' must be specified Reserved for future use Reserved for future use Unable to load service '%1': %2 Call of Service '%1', Method '%2' failed: %3 '%1' segment format detected Sending IDOC number: '%1' Request for receiving IDOCs of type: '%1' Allocating new Siebel message for IDOC type: '%1' Request for sending IDOCs of type: '%1' Received IDOC type: '%1', number: '%2' Parsing '%1' IDOC(s) Received IDOC(s) of type '%1' Receiving raw IDOC(s)
Error Message #
Error Code
Message Facility ODU ODU ODU EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
237 SBL-ODU-00237 238 SBL-ODU-00238 239 SBL-ODU-00239 2,853 SBL-EAI-02853 2,851 SBL-EAI-02851 2,847 SBL-EAI-02847 2,849 SBL-EAI-02849 2,850 SBL-EAI-02850 2,848 SBL-EAI-02848 2,845 SBL-EAI-02845 2,841 SBL-EAI-02841 2,846 SBL-EAI-02846 2,852 SBL-EAI-02852 2,854 SBL-EAI-02854 2,844 SBL-EAI-02844 2,843 SBL-EAI-02843 2,842 SBL-EAI-02842 2,840 SBL-EAI-02840 2,856 SBL-EAI-02856 2,855 SBL-EAI-02855 951 SBL-EAI-00951 950 SBL-EAI-00950 954 SBL-EAI-00954 955 SBL-EAI-00955 952 SBL-EAI-00952 953 SBL-EAI-00953 2,156 SBL-EAI-02156 2,157 SBL-EAI-02157 2,151 SBL-EAI-02151 2,150 SBL-EAI-02150 2,152 SBL-EAI-02152 2,153 SBL-EAI-02153 2,163 SBL-EAI-02163 2,161 SBL-EAI-02161 2,162 SBL-EAI-02162
77 of 117
Message Text RFC connection attributes: Destination: '%1', Host name: '%2', Partner host name: '%3', System number: '%4', System name: '%5', Client: '%6', User: '%7', Language: '%8' Beginning RFC transaction Committing RFC transaction Rolling back RFC transaction Received tRFC Transaction ID: '%1' tRFC Transaction ID '%1' is now committed by '%2' service to Siebel Database tRFC Transaction ID '%1' already completed by another process, no need to process Data Saved for tRFC Transaction ID '%1' by '%2' service tRFC Transaction ID '%1' is locked for processing by '%2' service tRFC Transaction ID '%1' could not be locked for processing by '%2' service tRFC Transaction ID '%1' is now unlocked by '%2' service Executing with SAPWriteXML = '%1' Timed out while receiving IDOCs IDOC Version Profile unmatched, IDOC sent by SAP may not be same version as Integration Object, profile was: '%1' Ignored IDOC type: '%1', number: '%2' 1% 1% RFC error: Key: '%1', Status: '%2', Message: '%3', Internal Status: '%4', Operation: '%5' Rollback failed: '%1'; aborting further EAI Siebel Adapter processing. Please verify that configurations of integration object and corresponding business object are both valid and in sync.\n Non existing column '%1' referenced from table '%2'. Verified modification key field '%1' has value '%2' Business component '%1' allows only ASCII characters; the value '%2' for field '%3' has thus been changed to '%4' Processing the instance of integration object '%1' with the root component search specification '%2' failed with the following error message: '%3'. Continuing processing next integration object instance.
Error Message #
Error Code
2,159 SBL-EAI-02159
2,164 SBL-EAI-02164 2,165 SBL-EAI-02165 2,166 SBL-EAI-02166 2,158 SBL-EAI-02158 2,173 SBL-EAI-02173 2,174 SBL-EAI-02174 2,171 SBL-EAI-02171 2,172 SBL-EAI-02172 2,169 SBL-EAI-02169 2,170 SBL-EAI-02170 2,175 SBL-EAI-02175 2,160 SBL-EAI-02160 2,176 SBL-EAI-02176
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
2,154 SBL-EAI-02154 2,168 SBL-EAI-02168 2,167 SBL-EAI-02167 2,155 SBL-EAI-02155 2,111 SBL-EAI-02111 2,108 SBL-EAI-02108
2,109 SBL-EAI-02109
EAI
78 of 117
Message Text Processing the instance of integration object '%1' failed with the following error message: '%2'. Continuing processing next integration object instance. Field '%1' in integration component '%2' can not be validated via picklist in EAI Siebel Adapter, because its pickmap is empty Field '%1' in integration component '%2' can not be validated via picklist in EAI Siebel Adapter, because it's referencing a non-existing picklist Ignoring failed validation of value '%1' by picklist on the field '%2' in integration component '%3' Value '%1' failed validation for non-bounded picklist on the field '%2' in integration component '%3' Non existing table '%1' referenced when retrieving column definition for field '%2'. Using user key '%1' (%2) for the integration component '%3' Entering "CreateAndForwardWorkItem()" on Create Work Item Service Returned "CreateAndForwardWorkItem()" on Create Work Item Service Create Work Item Service Created Create Work Item Service Destroyed "Execute" Method exited on Create Work Item Service "Execute" Method invoked on Create Work Item Service Dispatcher is starting to reporting an error Avaya CRMC Message Dispatch Entered Avaya CRMC Message Dispatch Exited Dispatcher is finished reporting an error Encountered fatal error during error processing. Dispatcher will generate an application level error Locating XML child in inputs Getting Service '%1' Invoking Method '%1' on Service '%2' MIME decode step took %1 ticks MIME encode step took %1 ticks Overall '%1' processing took %2 ticks Workflow '%1' took %2 ticks XML decode step took %1 ticks XML encode step took %1 ticks Invoke workflow phase Generate IDs phase
Error Message #
Error Code
2,110 SBL-EAI-02110
2,105 SBL-EAI-02105
EAI
2,106 SBL-EAI-02106
EAI
2,102 SBL-EAI-02102
EAI
2,103 SBL-EAI-02103
EAI
2,113 SBL-EAI-02113 2,107 SBL-EAI-02107 2,720 SBL-EAI-02720 2,721 SBL-EAI-02721 2,722 SBL-EAI-02722 2,723 SBL-EAI-02723 2,724 SBL-EAI-02724 2,725 SBL-EAI-02725 2,758 SBL-EAI-02758 2,747 SBL-EAI-02747 2,748 SBL-EAI-02748 2,759 SBL-EAI-02759 2,760 SBL-EAI-02760
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
2,743 SBL-EAI-02743 2,740 SBL-EAI-02740 2,741 SBL-EAI-02741 2,767 SBL-EAI-02767 2,766 SBL-EAI-02766 2,762 SBL-EAI-02762 2,763 SBL-EAI-02763 2,765 SBL-EAI-02765 2,764 SBL-EAI-02764 2,753 SBL-EAI-02753 2,754 SBL-EAI-02754
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
79 of 117
Message Text License check phase MIME decode phase MIME encode phase Test response phase XML decode phase XML encode phase Releasing Service '%1' Dispatcher (successfully) reported the error '%1' Validating message XML tag Dispatcher wrote out file diagnostic information into file '%1' Adding XML header lines Adding MIME types to the XML child CleanUp: table_name = %1, operation = %2, dock_txn_id = %3 Found odbc ENV handle in the model cache The cursor cache has the following: '%1' Cursor for statement '%1' added to cache The cursor '%1' deleted, with access count '%2' Could not create cursor: %1 Cursor for statement '%1' found in cache Parameters for Statement '%1' need to be rebound Transaction may have rolled-back for all cursors as Commit failed. The cursors affected: '%1' '%1' returned SUCCESS_WITH_INFO with msg: '%2' Executing sql statement %1 with bind variables: %2 Transaction mode switched to '%1' mode Transaction was '%1' Rule is matched, build the output to be sent to the business service and method Dispatching to business service '%1' and method '%2' Dispatch is complete Find rule set '%1' in database No business service or/and method specified for a dispatch. Child property set of type '%1' not found. Unable to proceed. Retrieved rule of sequence '%1, grammar '%2', dispatching to '%3' with method '%4' Matching of input against '%1' rules in the rule set
Error Message #
Error Code
Message Facility EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
2,749 SBL-EAI-02749 2,750 SBL-EAI-02750 2,756 SBL-EAI-02756 2,752 SBL-EAI-02752 2,751 SBL-EAI-02751 2,755 SBL-EAI-02755 2,742 SBL-EAI-02742 2,757 SBL-EAI-02757 2,745 SBL-EAI-02745 2,761 SBL-EAI-02761 2,746 SBL-EAI-02746 2,744 SBL-EAI-02744 2,860 SBL-EAI-02860 2,660 SBL-EAI-02660 2,656 SBL-EAI-02656 2,657 SBL-EAI-02657 2,658 SBL-EAI-02658 2,659 SBL-EAI-02659 2,655 SBL-EAI-02655 2,652 SBL-EAI-02652 2,651 SBL-EAI-02651
2,650 SBL-EAI-02650 2,661 SBL-EAI-02661 2,653 SBL-EAI-02653 2,654 SBL-EAI-02654 2,532 SBL-EAI-02532 2,533 SBL-EAI-02533 2,534 SBL-EAI-02534 2,535 SBL-EAI-02535 2,538 SBL-EAI-02538 2,539 SBL-EAI-02539 2,536 SBL-EAI-02536 2,531 SBL-EAI-02531
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
80 of 117
Message Text Retrieved rule output property of storage type '%1' and value '%2' Retrieve the rule set Service Argument Tracing - '%1' Business Service Error: '%2' Service Argument Tracing - Error getting '%1' Business Service Beginning Siebel transaction Parameter '%1' has been specified as a server task parameter. This parameter specification mechanism has been deprecated. Specify the parameter either in a named subsystem or as a property in a runtime input property set. Committing Siebel transaction Dispatch Service: '%1', Method: '%2' completed successfully Dispatching to Service: '%1', Method: '%2'%3 Dispatch Service Error: Symbol: '%1' Message: '%2' Dispatch Service: '%1', Method: '%2' failed Input Message: IntObjType=%1 Format=%2 Number of Objects=%3 Header property %1 = %2 Siebel transaction is in progress Siebel transaction is NOT in progress Output Message: IntObjType=%1 Format=%2 Header property %1 = %2 Rolling back Siebel transaction Parameter '%1' has been specified as a business service user property. This parameter specification mechanism has been deprecated. Specify the parameter either in a named subsystem or as a property in a runtime input property set. Unexpected end of Siebel transaction detected Adding file attachment element '%1' to XML hierarchy of element '%2' Adding property for attribute '%1' with value '%2' to XML hierarchy of element '%3' Adding integration component '%1' child components to XML hierarchy Converting element '%1' to a child of integration component '%2' element '%3' Adding component '%1' based on element '%2' to integration object hierarchy
Error Message #
Error Code
2,537 SBL-EAI-02537 2,530 SBL-EAI-02530 2,064 SBL-EAI-02064 2,065 SBL-EAI-02065 2,058 SBL-EAI-02058 2,063 SBL-EAI-02063
2,060 SBL-EAI-02060 2,057 SBL-EAI-02057 2,056 SBL-EAI-02056 2,055 SBL-EAI-02055 2,054 SBL-EAI-02054 2,050 SBL-EAI-02050 2,051 SBL-EAI-02051 2,066 SBL-EAI-02066 2,067 SBL-EAI-02067 2,052 SBL-EAI-02052 2,053 SBL-EAI-02053 2,059 SBL-EAI-02059 2,062 SBL-EAI-02062
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
2,061 SBL-EAI-02061 2,030 SBL-EAI-02030 2,035 SBL-EAI-02035 2,032 SBL-EAI-02032 2,017 SBL-EAI-02017 2,018 SBL-EAI-02018
81 of 117
Message Text Adding integration component '%1' element '%2' to XML hierarchy Adding child element '%1' to XML hierarchy of element '%2' Adding attachment from XML element '%1' based on integration component '%2' field '%3' to integration object hierarchy Setting integration component '%1' field '%2' to value '%3' from attribute '%4' of element '%5' Adding field '%1' attribute '%2' with value '%3' to XML hierarchy of element '%4' Adding integration field '%1' element '%2' child fields to XML hierarchy Setting integration component '%1' field '%2' to value '%3' from element '%4' Adding field '%1' element '%2' with value '%3' to XML hierarchy of element '%4' Setting integration component '%1' field '%2' to value '%3' from element '%4' Adding field '%1' with value '%2' of component element '%3' Generating Siebel message header for integration object '%1' on top of XML element '%2' Adding integration component '%1' homogeneous hierarchy to element '%2' Adding integration object '%1' element '%2' to XML hierarchy Creating XML hierarchy for integration object '%1' Converting XML hierarchy of element '%1' to root integration component '%2' hierarchy Adding root component '%1' element '%2' to XML hierarchy Converting element '%1' XML hierarchy to integration object '%2' hierarchy Create file for MIME message MIME message created Creating property set for MIME '%1' Finished creation of property set for MIME part '%1' MIME message Complete '%1' of MIME message Parsed body of MIME message Parsed header of MIME message Create MIME '%1' Complete creation of MIME '%1'
Error Message #
Error Code
2,020 SBL-EAI-02020
EAI
2,027 SBL-EAI-02027 2,031 SBL-EAI-02031 2,019 SBL-EAI-02019 2,029 SBL-EAI-02029 2,021 SBL-EAI-02021 2,028 SBL-EAI-02028 2,036 SBL-EAI-02036
2,033 SBL-EAI-02033 2,024 SBL-EAI-02024 2,023 SBL-EAI-02023 2,016 SBL-EAI-02016 2,025 SBL-EAI-02025 2,015 SBL-EAI-02015 2,454 SBL-EAI-02454 2,457 SBL-EAI-02457 2,451 SBL-EAI-02451 2,452 SBL-EAI-02452 2,455 SBL-EAI-02455 2,456 SBL-EAI-02456 2,453 SBL-EAI-02453 2,450 SBL-EAI-02450 2,458 SBL-EAI-02458 2,459 SBL-EAI-02459
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
82 of 117
Message Text Entered "CreateAndDispatchIntObjs()" on Oracle Receiver Service Returning "CreateAndForwardWorkItem()" on Oracle Receiver Service Entered "CreateIntObj()" on Oracle Receiver Service Returning "CreateIntObj()" on Oracle Receiver Service Oracle Receiver Service Created Oracle Receiver Service Destroyed Entered "Dispatch()" on Oracle Receiver Service Returning "Dispatch()" on Oracle Receiver Service Entered "DeleteNotifyTable()" on Oracle Receiver Service Returning "DeleteNotifyTable()" on Oracle Receiver Service Entered "ReadNotifyTableSpecific()" on Oracle Receiver Service Returning "ReadNotifyTableSpecific()" on Oracle Receiver Service Entered "ReadNotifyTable()" on Oracle Receiver Service Returning "ReadNotifyTable()" on Oracle Receiver Service Entered "ReadPriorityTable()" on Oracle Receiver Service Returning "ReadPriorityTable()" on Oracle Receiver Service "RunDataSpecific" Method exited on Oracle Receiver Service "RunDataSpecific" Method invoked on Oracle Receiver Service "RunData" Method exited on Oracle Receiver Service "RunData" Method invoked on Oracle Receiver Service Entered "UpdateNotifyTable()" on Oracle Receiver Service Returning "UpdateNotifyTable()" on Oracle Receiver Service Added user property for component '%1' Added table '%1' in application '%2' to the cache Found component '%1' as child of component '%2'
Error Message #
Error Code
Message Facility EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
2,776 SBL-EAI-02776 2,777 SBL-EAI-02777 2,782 SBL-EAI-02782 2,783 SBL-EAI-02783 2,770 SBL-EAI-02770 2,771 SBL-EAI-02771 2,784 SBL-EAI-02784 2,785 SBL-EAI-02785 2,788 SBL-EAI-02788 2,789 SBL-EAI-02789 2,780 SBL-EAI-02780 2,781 SBL-EAI-02781 2,778 SBL-EAI-02778 2,779 SBL-EAI-02779 2,786 SBL-EAI-02786 2,787 SBL-EAI-02787 2,775 SBL-EAI-02775 2,774 SBL-EAI-02774 2,773 SBL-EAI-02773 2,772 SBL-EAI-02772 2,790 SBL-EAI-02790 2,791 SBL-EAI-02791 2,700 SBL-EAI-02700 2,709 SBL-EAI-02709 2,708 SBL-EAI-02708
83 of 117
Message Text Skipped adding table '%1' as a child of '%2' because it's addition would form a circular path Created component of type '%1' having name '%2' and external name '%3' Metadata query for components rooted at '%1' returned no results Metadata query for fields of component '%1' returned no results Metadata query for %1 key fields of component '%2' returned no results Skipped table with Id '%1' as it's not present in the universe specified Unknown datatype '%1' found for component '%2' The Query Specified for Object Id '%1' of type '%2' is '%3' Completed Initializing service %1 Method %1 for service %2 returned an error Method %1 for service %2 done executing Invoking method %1 for service %2 Logging in to Object Manager Business Service '%1' instantiated, starting main Receiver loop Shutting down... SAP Connect error. SAPRfcDestEntry : '%1'. See SAP RFC trace file for more info '%1'. Field name: '%2', value: '%3', type: '%4' SAP Connect error. Username: '%1' Connect string: '%2'. See SAP RFC trace file for more info Field named '%1' has duplicate field sequence '%2' for integration component '%3' Invalid sequence '%1' for field '%2' of integration component '%3' Rfc Error Occurred, Data saved in XML Queue, Processing continuing: Service '%1', Method '%2', Ref ID '%3', Rfc Message '%4' SAP error for Rfc method '%1'. Code: '%2', message: '%3', level: '%4' SAP returned table: '%1'. Since it does not have an integration component associated with it, the table data will not be processed. EAI Snapshot: Getting snapshot for '%1' with '%2' = '%3', '%4' = '%5'. The snapshot is existed
Error Message #
Error Code
2,701 SBL-EAI-02701
2,702 SBL-EAI-02702 2,707 SBL-EAI-02707 2,703 SBL-EAI-02703 2,704 SBL-EAI-02704 2,705 SBL-EAI-02705 2,706 SBL-EAI-02706 2,040 SBL-EAI-02040 2,607 SBL-EAI-02607 2,602 SBL-EAI-02602 2,605 SBL-EAI-02605 2,604 SBL-EAI-02604 2,603 SBL-EAI-02603 2,601 SBL-EAI-02601 2,600 SBL-EAI-02600 2,606 SBL-EAI-02606 2,307 SBL-EAI-02307 2,303 SBL-EAI-02303 2,304 SBL-EAI-02304
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
EAI EAI
2,805 SBL-EAI-02805
EAI
84 of 117
Message Text EAI Snapshot: Getting snapshot for '%1' with '%2' = '%3', '%4' = '%5'. The snapshot is not existed EAI Snapshot: Inbound comparing snapshot for type '%1' with new '%2' = '%3' and old '%2' = '%4' EAI Snapshot: Inbound comparing snapshot for type '%1' with new '%2' = '%3' and old '%4' = '%5' EAI Snapshot: newModNum = '%1', oldModNum = '%2' EAI Snapshot: Sorting and inserting new key '%1' EAI Snapshot: Sorting and inserting old key '%1' EAI Snapshot: Outbound comparing snapshot for type '%1' with new '%2' = '%3' and old '%2' = '%4' EAI Snapshot: Outbound comparing snapshot for type '%1' with new '%2' = '%3' and old '%4' = '%5' EAI Snapshot: Outbound computing skeleton snapshot for type '%1' with new '%2' = '%3' EAI Snapshot: Getting snapshot with '%1' = '%2' EAI Snapshot: Inserting snapshot for integration object instance '%1' with '%2' = %3' and '%4' = '%5' EAI Snapshot: '%1' = '%2', '%3' = '%4', '%5' = '%6' EAI Snapshot: Snapshot channel name is missing or invalid. The program will continue but get empty result EAI Snapshot: Updating snapshot for integration object instance '%1' with '%2' = %3' and '%4' = '%5' Added child type %1 for parent %2 in QBE hierarchy Query for int component type %1 returned %2 instances Deleting component of type %1 having data: %2 Execution time for %1 of object %2: %3 Invalid value '%1' specified for field %2 Method %1 called for int object %2 Method %1 failed for int object %2 The following parameters specified for Sql Adapter: %1 Query called for int object %1 in %2 mode
Error Message #
Error Code
2,806 SBL-EAI-02806
2,808 SBL-EAI-02808
EAI
2,834 SBL-EAI-02834
EAI
2,833 SBL-EAI-02833
EAI
EAI EAI
2,804 SBL-EAI-02804
EAI
2,673 SBL-EAI-02673 2,677 SBL-EAI-02677 2,675 SBL-EAI-02675 2,685 SBL-EAI-02685 2,684 SBL-EAI-02684 2,674 SBL-EAI-02674 2,672 SBL-EAI-02672 2,671 SBL-EAI-02671 2,670 SBL-EAI-02670
85 of 117
Message Text Reverse query for comp '%1' %2 with data: %3 Query for int object %1 returned %2 output objects Search Specification on component %1: %2 Using user key '%1' for component '%2' %1 key not defined for component %2 Instance count=%1, Db Count=%2 for component type %3, so %4 is more efficient %1 component of type %2 having data: %3 Upsert called in %1 mode EAI Transaction: Beginning Siebel transaction EAI Transaction: Committing Siebel transaction EAI Transaction: Rolling back Siebel transaction Buffer for reading message Buffer for writing message Connection Type EAI Transport Converter EAI Transport Converter has been initialized to process data as Documents (no Converter Service specified) EAI Transport Converter has been initialized to process data as Hierarchy using Converter Service '%1' EAI Transport Dispatcher Converting EAI Transport buffer to Dispatch Service input Failed to convert EAI Transport buffer to Dispatch Service input Converting Dispatch Service output to EAI Transport buffer Failed to convert Dispatch Service output to EAI Transport buffer Dispatch Rule Set: %1 Dispatch Service: %1, Dispatch Method: %2 Dispatch Workflow: %1 After invoking function '%1' in DLL '%2' Before invoking function '%1' in DLL '%2' DLL Transport Connection Error Response Invalid character set Unable to delete file '%1' Opened File: '%1' for '%2' Response file '%1' not available File Transport Connection
Error Message #
Error Code
Message Facility EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
2,683 SBL-EAI-02683 2,678 SBL-EAI-02678 2,681 SBL-EAI-02681 2,686 SBL-EAI-02686 2,682 SBL-EAI-02682 2,676 SBL-EAI-02676 2,680 SBL-EAI-02680 2,679 SBL-EAI-02679 2,830 SBL-EAI-02830 2,832 SBL-EAI-02832 2,831 SBL-EAI-02831 2,332 SBL-EAI-02332 2,333 SBL-EAI-02333 2,395 SBL-EAI-02395 2,338 SBL-EAI-02338 2,384 SBL-EAI-02384
2,385 SBL-EAI-02385
EAI
2,339 SBL-EAI-02339 2,386 SBL-EAI-02386 2,388 SBL-EAI-02388 2,387 SBL-EAI-02387 2,389 SBL-EAI-02389 2,382 SBL-EAI-02382 2,381 SBL-EAI-02381 2,383 SBL-EAI-02383 2,370 SBL-EAI-02370 2,369 SBL-EAI-02369 2,335 SBL-EAI-02335 2,394 SBL-EAI-02394 2,328 SBL-EAI-02328 2,373 SBL-EAI-02373 2,358 SBL-EAI-02358 2,377 SBL-EAI-02377 2,334 SBL-EAI-02334
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
86 of 117
Message Text Received Dynamic Dispatch Service: '%1', Method: '%2' Initialized transport service: Mode: '%1', XML Conversion Service: '%2' Dropped old connection and creating new connection for '%1' Converted Property Set to XML Switched transport service direction to: '%1' Converted XML to Property Set Dispatch Service not found. Ignoring invalid dispatch method: %1. Dispatch Method not found. Ignoring invalid dispatch service: %1. Inbound cleanup MQSeries AMI Transport Service commit MQSeries AMI transaction create MQSeries AMI connection delete MQSeries AMI connection get message through MQSeries AMI put message through MQSeries AMI rollback MQSeries AMI transaction MQSeries AMI Transport Connection MQSeries Queue Manager connection MQSeries Queue connection Response Queue name MQSeries Server Transport Connection Creating AMI connection Repository: '%1', Policy: '%2', Service: '%3', Repository File: '%4', Local Host File: '%5', Trace: '%6', Trace Location: '%7' Destroying AMI %1 connection AMI Error: %1Operation: %2, Source: %3, AMI Reason Code: %4, MQSeries Reason Code: %5 Unknown AMI Exception while trying to %1 AMI Warning: %1Operation: %2, Source: %3, AMI Reason Code: %4, MQSeries Reason Code: %5 Beginning MQSeries transaction Closed MQSeries Queue: '%1' Committing MQSeries transaction Connected to MQSeries Queue Manager: '%1' Disconnected from MQSeries Queue Manager: '%1' MQSeries error code: %1 Putting maximum rolled back message on the backout requeue queue
Error Message #
Error Code
Message Facility EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
2,352 SBL-EAI-02352 2,350 SBL-EAI-02350 2,355 SBL-EAI-02355 2,353 SBL-EAI-02353 2,351 SBL-EAI-02351 2,354 SBL-EAI-02354 2,379 SBL-EAI-02379 2,380 SBL-EAI-02380 2,390 SBL-EAI-02390 2,349 SBL-EAI-02349 2,345 SBL-EAI-02345 2,343 SBL-EAI-02343 2,344 SBL-EAI-02344 2,347 SBL-EAI-02347 2,348 SBL-EAI-02348 2,346 SBL-EAI-02346 2,337 SBL-EAI-02337 2,340 SBL-EAI-02340 2,341 SBL-EAI-02341 2,342 SBL-EAI-02342 2,336 SBL-EAI-02336 2,365 SBL-EAI-02365
EAI EAI
EAI EAI
2,361 SBL-EAI-02361 2,399 SBL-EAI-02399 2,362 SBL-EAI-02362 2,359 SBL-EAI-02359 2,398 SBL-EAI-02398 2,396 SBL-EAI-02396 2,364 SBL-EAI-02364
87 of 117
Message Text Opened MQSeries Physical Queue: '%1', Model Queue: '%2' Rolling back MQSeries transaction MQSeries warning code: %1 Beginning MSMQ transaction Committing MSMQ transaction Rolling back MSMQ transaction Outbound Reading Receiving %1 Request Response Sending %1 Loss of data in %1 character set conversion Neither DispatchMethod nor ConfiguredMethod were provided for outbound operation in DynamicDispatch mode Message rolled back maximum number of times due to dispatch errors detected No MQFormat specified with IsTextData set to 'false'. This will cause MQRC_FORMAT_ERROR for the receiver Writing Root component property set 'type' was '%1', should be '%2' for Integration Object type '%3' Integration Object Message error -- object list property set has wrong type: '%1' (expecting '%2') Child container type %1 not a valid child of component %2 Child type %1 not a valid child of component %2 Component type '%1' has more than one (exactly '%2') child types '%3' - child type should be unique. EAI Integration Object Validator complete - %1 errors found Field %1 is not valid for component type %2 Field '%1' of component '%2' too long - length was '%3', maximum length is '%4' Truncating Field '%1' of component '%2' - length was '%3', maximum length is '%4' Truncating field '%1' of component '%2' - length was '%3', maximum length is '%4'. Truncating original field value: '%5', truncated value: '%6'. '%1' is not a valid value for message header property '%2'
Error Message #
Error Code
Message Facility EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
2,360 SBL-EAI-02360 2,363 SBL-EAI-02363 2,397 SBL-EAI-02397 2,374 SBL-EAI-02374 2,375 SBL-EAI-02375 2,376 SBL-EAI-02376 2,391 SBL-EAI-02391 2,330 SBL-EAI-02330 2,371 SBL-EAI-02371 2,392 SBL-EAI-02392 2,393 SBL-EAI-02393 2,372 SBL-EAI-02372 2,329 SBL-EAI-02329 2,357 SBL-EAI-02357
EAI EAI
EAI EAI
2,557 SBL-EAI-02557
EAI
2,552 SBL-EAI-02552 2,553 SBL-EAI-02553 2,566 SBL-EAI-02566 2,567 SBL-EAI-02567 2,571 SBL-EAI-02571
2,561 SBL-EAI-02561
EAI
88 of 117
Message Text Message header property 'IntObjectFormat' is invalid Message header property 'MessageType' should be 'Integration Object' Required message header property 'IntObjectName' is missing or invalid External-required field '%1' of component '%2' is missing on the integration object instance. '%1' is not a valid name for a child property set of component type '%2' - child types must start with 'ListOf' XML parent/grandparent field '%1' of field '%2' on component '%3' is missing. Top level Property Set should have only one child property set (object container) Validation of object instance %1 complete - %2 errors found Starting validation of object instance %1 (type '%2') EAI Integration Object Validator starting (IntObjectName='%1') EAI Integration Object Validator complete Validation successful Invalid SAP Language: '%1' set to '%2' Executed RFC call DDIF_FIELDINFO_GET for segments '%1', '%2' Field definitions not found for IDOC documentation segment: '%1' Found IDOC Type: '%1' Description not found for IDOC type: '%1' Executed RFC call EDI_IDOC_SYNTAX_GET for IDOC type '%1' SAPSysVersion '%1' is invalid, attempting to call SAP to retrieve version SAP version '%1' given is invalid or missing, defaulting to current SAP system version '%2' Message type not found for IDOC type: '%1' ALE version '%1' given is invalid, using default of '%2' No user-defined Execute Abap Integration Object for '%1', using integration objects: '%2' and '%3' SAPSysVersion is not given, attempting to call SAP to retrieve version No Version Information given, defaulting to System Version '%1', ALE Version '%2', Idoc Version '%3' Description not found for segment type: '%1'
Error Message #
Error Code
2,562 SBL-EAI-02562 2,559 SBL-EAI-02559 2,560 SBL-EAI-02560 2,570 SBL-EAI-02570 2,563 SBL-EAI-02563
2,569 SBL-EAI-02569 2,565 SBL-EAI-02565 2,556 SBL-EAI-02556 2,555 SBL-EAI-02555 2,550 SBL-EAI-02550 2,551 SBL-EAI-02551 2,509 SBL-EAI-02509 2,508 SBL-EAI-02508 2,504 SBL-EAI-02504 2,501 SBL-EAI-02501 2,503 SBL-EAI-02503 2,507 SBL-EAI-02507 2,513 SBL-EAI-02513 2,511 SBL-EAI-02511
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
EAI EAI
2,505 SBL-EAI-02505
EAI
89 of 117
Message Text Executed RFC call EDI_SEGMENT_DESCRIPTION_GET on segment '%1' Executed RFC call GET_TABLE_ENTRIES_VIA_RFC on BASIS table '%1' EAI Siebel Wizard: Create Int Component for Business Component ('%1') with parent Business Component ('%2') EAI Siebel Wizard: Create Int Field '%1' for Business Component '%2' Could not create user keys for integration component %1 for business component %2 EAI Siebel Wizard: Printing User Keys for table: '%1' MVG: '%2' EAI Siebel Wizard: Creating key fields '%1' EAI Siebel Wizard: User Key '%1': User Key Name: '%2' User Key Sequence:'%3' EAI Siebel Wizard: Using fieldname '%1' for MVG field '%2' EAI Siebel Wizard: Found key column '%1' in table '%2' EAI Siebel Wizard: User Key Elements: '%1' EAI Siebel Wizard: User Key List dump of list '%1' EAI Siebel Wizard Beginning user key computation: Buscomp = '%1', Table = '%2' EAI Siebel Wizard: Begin dump of Key Lists EAI Siebel Wizard: Recursive ProcessTable Call: Source Table:'%1', FK Table = '%2': Source field: '%3' Dispatching inbound web service operation '%1' took %2 ms Dispatching outbound web service operation '%1' took %2 ms Executing web service operation '%1' by calling method '%2' of business service '%3' Executing Operation '&1' by calling method '&2' of business service '&3' Executing outbound web service operation '%1' using port '%2' of web service '%3' in namespace '%4' Executing web service operation '%1' by calling workflow process '%2' Loaded Operation '%1': Method '%2' Loaded Operation Binding '%1': Binding Property = '%2', Binding Value = '%3' Loaded Port '%1': Protocol = '%2', Transport = '%3', Address = '%4', Type = '%5'
Error Message #
Error Code
2,506 SBL-EAI-02506
2,500 SBL-EAI-02500
EAI
2,402 SBL-EAI-02402
EAI
2,413 SBL-EAI-02413 2,401 SBL-EAI-02401 2,409 SBL-EAI-02409 2,412 SBL-EAI-02412 2,410 SBL-EAI-02410 2,411 SBL-EAI-02411 2,404 SBL-EAI-02404 2,408 SBL-EAI-02408 2,407 SBL-EAI-02407 2,403 SBL-EAI-02403 2,406 SBL-EAI-02406 2,405 SBL-EAI-02405
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
2,877 SBL-EAI-02877
EAI
90 of 117
Message Text Loaded Port Type '%1': Implementation Type = '%2', Implementation Name = '%3' Loaded Web Service '%1': Namespace = '%2', Comments = '%3', Inbound = '%4' Execution of web service operation '%1' took %2 ms XML conversion warning: Some character(s) could not be represented in local codepage and were lost Character '%1' cannot be represented in XML Not enough memory to perform conversion from character set '%1' to '%2' XML conversion error, creating a dump file containing source XML document... XML character encoding '%1' was found in the XML Declaration XML character encoding '%1' detected Detected XML character encoding '%1' conflicts with XML declaration encoding="%2" XML document will be generated with '%1' character encoding XML conversion warning: XML character encoding '%1' was detected for which specific character set encoding will not be output XML Parse warning: %1 EAI ZDT: Publish integration object instance with '%1' = '%2', '%3' = '%4', and '%5' = '%6' EAI ZDT: Calling workflow '%1' with '%2' = '%3' Input XML: %1 Input XSL: %1 Output XML/HTML: %1 Integration Object instance '%1' not found in the database Not enough memory to perform conversion from character set '%1' to '%2' DTD parser cannot replace entity with 1% DTD parser cannot find element: %1 ( parent: %2 cannot set relationship with it) DTD parser cannot parse attribute: %1 at the position: %2 DTD parser cannot parse attribute: %1 (element: %2 does not exist) DTD parser cannot parse element: %1 at the position: %2 DTD parser cannot parse entity: %1 at the position: %2
Error Message #
Error Code
2,009 SBL-EAI-02009 2,008 SBL-EAI-02008 2,001 SBL-EAI-02001 2,007 SBL-EAI-02007 2,002 SBL-EAI-02002 2,006 SBL-EAI-02006
EAI EAI
2,000 SBL-EAI-02000 2,820 SBL-EAI-02820 2,821 SBL-EAI-02821 2,872 SBL-EAI-02872 2,873 SBL-EAI-02873 2,874 SBL-EAI-02874 4,000 SBL-EAI-04000 4,001 SBL-EAI-04001 4,276 SBL-EAI-04276 4,277 SBL-EAI-04277 4,278 SBL-EAI-04278 4,279 SBL-EAI-04279 4,280 SBL-EAI-04280 4,281 SBL-EAI-04281
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
91 of 117
Message Text DTD parser has no file service model for file: %1 DTD parser cannot trim: %1 at the position: %2 DTD Wizard element %1 has bad cardinality DTD Wizard cannot parse tree: %1 DTD Wizard has no element in maps DTD Wizard start node: %1 is null DTD Wizard previous tree is null An error occurred creating a new Integration Object instance in memory. Error in decoding a base64 encoded string No field of DTYPE_ATTACHMENT is present in the integration component definition No key field name present in the integration component instance Bad input for '%1': '%2' Bad output for '%1': '%2' An empty file attachment is encountered with ContentId '%1'. Please make sure that all of the file attachments have data associated with them. More than one file attachment document is used with the same ContentId '%1'. Please make sure that all the file attachments either have unique ContentId or do not contain data if attachment is being reused. Integration component type '%1' is not a valid child type for component type '%2' Invalid value for operation field: '%1' Root component property set 'type' was '%1', should be '%2' for Integration Object type '%3' Integration Object Message error -- object list property set has wrong type: '%1' (expecting '%2') Service method arguments should have child of type '%1' Service Method arguments property set has no children - expected a child of type 'SiebelMessage' Field '%1' of component '%2' too long - length was '%3', maximum length is '%4' Error creating file reference '%1' Unable to read XML from location '%1': %2 Unable to read XML from location '%1': %2 Error deleting file reference '%1'
Error Message #
Error Code
Message Facility EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
4,282 SBL-EAI-04282 4,283 SBL-EAI-04283 4,284 SBL-EAI-04284 4,285 SBL-EAI-04285 4,286 SBL-EAI-04286 4,287 SBL-EAI-04287 4,288 SBL-EAI-04288 4,002 SBL-EAI-04002 4,474 SBL-EAI-04474 4,003 SBL-EAI-04003 4,004 SBL-EAI-04004 4,005 SBL-EAI-04005 4,006 SBL-EAI-04006 13,001 SBL-EAI-13001
13,000 SBL-EAI-13000
EAI
4,007 SBL-EAI-04007
EAI
EAI EAI
EAI EAI
4,463 SBL-EAI-04463
EAI
92 of 117
Message Text The file reference '%1' does not exist. Error getting the size of file reference '%1' Error reading from file reference '%1' Error writing to file reference '%1' Argument '%1' with integration object type '%2' not found. Encountered message '%3' with integration object type '%4' specified. Integration Object type must be specified for XML Hierarchical format Missing or invalid Siebel Message. License Key not found for Business Service '%1', Class '%2' Field '%1' in the integration component '%2' contains value '%3', which is longer than allowed length of %4 characters. '%1' is not a valid value for message header property '%2' Expecting message header field '%1' to have a value of '%2' (actual value was '%3') Message header property 'IntObjectFormat' is invalid Message header property 'MessageType' should be 'Integration Object' Required message header property 'IntObjectName' is missing or invalid '%1' is not a valid name for a child property set of component type '%2' - child types must start with 'ListOf' Child property set of service method arguments must be of type 'SiebelMessage' (type was '%1') Integration Object does not contain any data Input Message is missing header properties Cannot get root component from for the integration object '%1' definition. Service Method arguments property set has no children, should have one child of type 'SiebelMessage' SiebelMessage Property Set should have only one child property set (object container) Service Method arguments property set should have only one child, with a type of 'SiebelMessage' Parameter 'OutputIntObjectFormat' value is invalid ('%1') - should be 'Siebel Hierarchical', 'XML Hierarchical', or 'XML Flat'
Error Message #
Error Code
4,461 SBL-EAI-04461 4,466 SBL-EAI-04466 4,464 SBL-EAI-04464 4,465 SBL-EAI-04465 4,014 SBL-EAI-04014
4,016 SBL-EAI-04016 4,455 SBL-EAI-04455 4,017 SBL-EAI-04017 4,018 SBL-EAI-04018 4,019 SBL-EAI-04019 4,020 SBL-EAI-04020
4,021 SBL-EAI-04021
EAI
EAI EAI
4,028 SBL-EAI-04028
EAI
93 of 117
Message Text Method argument 'OutputIntObjectName' must be specified if an input EAI message is not provided Field '%1' is not a valid field name for Integration Component type '%2' in Integration Object type '%3' Unterminated token starting at position '%1' in EAI template '%2' Expecting Integration Object type '%1', Actual type was '%2' Integration object type in property set ('%1') does not match integration object type in parsed XML document ('%2') Siebel EAI Message header attribute parent's cannot be 'XML Flat' - must be either 'Siebel Hierarchical' or 'XML Hierarchical' Error in generating XML for Integration Object message of format 'XML Flat' Error in parsing XML for "XML Flat" Integration Object Message Parameter array Copy Failed. Check the bind parameters for: %1 Invalid DBA datatype: '%1' Invalid ODBC '%1' handle Parameter array Refresh Failed. Check the array contents for correct number of parameters. Parameter array Sync Failed. Check the array contents for correct number of parameters. Cannot dispatch because no rule was matched Error in parsing rule grammar Unable to dispatch to method '%2' of business service '%1' Rule '%1' is not of proper format/grammar Invalid storage type '%1' encountered for the rule output property Output property set cannot be generated due to faulty definition of rule output property Rule set contains no rules. There should be at least 1 rule present in a rule set No rule set corresponding to the rule set '%1' that is specified, is found Only one of '%1' is allowed. Rule set parameter not specified or found in input message Unable to locate child property set of type '%1' within property set of type '%2'.
Error Message #
Error Code
4,027 SBL-EAI-04027
4,029 SBL-EAI-04029
EAI
4,033 SBL-EAI-04033
EAI
4,034 SBL-EAI-04034 4,035 SBL-EAI-04035 4,036 SBL-EAI-04036 4,037 SBL-EAI-04037 4,038 SBL-EAI-04038 4,039 SBL-EAI-04039
4,040 SBL-EAI-04040
EAI
4,041 SBL-EAI-04041 4,042 SBL-EAI-04042 4,456 SBL-EAI-04456 4,043 SBL-EAI-04043 4,044 SBL-EAI-04044 4,045 SBL-EAI-04045 4,046 SBL-EAI-04046 4,047 SBL-EAI-04047 4,048 SBL-EAI-04048 4,049 SBL-EAI-04049 4,050 SBL-EAI-04050
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
94 of 117
Message Text Cannot auto-map. Root component ('%1') of source integration object ('%2') does not match root component ('%3') of destination integration object ('%4'). Please specify a data map. Internal integration object ('%1') must match with the target integration object specified in input data map ('%2'). Output object ('%1') must match with the target integration object specified in output data map ('%2'). Method '%1' requires a value for argument '%2'. Service '%1' requires a value for user property '%2'. Cannot map input object ('%1') to internal integration object ('%2'). Cannot map internal integration object ('%1') to output object ('%2'). Source expression generated attachment ID '%1' but the corresponding attachment cannot be found. Data Map automapping succeeded. Destination component '%1' cannot be created because does not belong to the output integration object. Parent component map '%1' not found. Data Transform Error: An error occurred, but an invalid error symbol was specified. Error Symbol: '%1'\n%2 Parameters:%3 Source component '%1' does not exist. Target component '%1' does not exist. Target field '%1' does not exist. Data Transform error: %1 Identifier '%1' not found. Data Transform error. CSSEAIIntCompOut.CopyFieldValue: No Source Integration Component. Call SetCopySource with a valid Integration Component before calling CopyFieldValue.\n Component: '%1'\n Target Field: '%2'\n Source Field: '%3' Data Transform error. CSSEAIIntCompIn.GetFieldValue: No active record. Call FirstRecord or NextRecord before accessing records.\n Component: '%1'\n Num Records: %2
Error Message #
Error Code
4,051 SBL-EAI-04051
4,052 SBL-EAI-04052
EAI
4,053 SBL-EAI-04053
EAI
4,054 SBL-EAI-04054 4,055 SBL-EAI-04055 4,056 SBL-EAI-04056 4,057 SBL-EAI-04057 4,058 SBL-EAI-04058
EAI EAI
EAI EAI
4,063 SBL-EAI-04063 4,064 SBL-EAI-04064 4,065 SBL-EAI-04065 4,066 SBL-EAI-04066 4,067 SBL-EAI-04067 4,068 SBL-EAI-04068
4,069 SBL-EAI-04069
EAI
95 of 117
Message Text Data Transform error. CSSEAIIntCompIn.GetFieldValue: No more records.\n Component: '%1'\n Num Records: %2 Data Transform error. CSSEAIIntCompIn.GetIntComp: No active record. Call FirstRecord or NextRecord before accessing records.\n Component: '%1'\n Num Records: %2 Data Transform error. CSSEAIIntCompIn.GetIntComp: No more records.\n Component: '%1'\n Num Records: %2 Data Transform error. CSSEAIIntCompOut.CreateIntComp: No Integration Component Record. Call NewRecord before CreateIntComp.\n Component: '%1'\n New Component: '%2' Data Transform error (internal). CSSEAIIntCompOut._CreateListOfPropSet: m_propsetParent is null. Data Transform error. CSSEAIIntCompOut.SetFieldValue: No Integration Component Record. Call NewRecord before SetFieldValue.\n Component: '%1'\n Field Name: '%2'\n Field Value: '%3' Data Transform error. EAICreateIntMsgOut: PropertySet is null Data Transform error. CSSEAIIntMsgIn.GetArgument: Object has no data. Check with Exists method first Data Transform error. CSSEAIIntMsgIn.GetIntObj: Requested Integration Object name does not match data.\n Requested Name: '%1'\n Actual Name: '%2' Data Transform error. CSSEAIIntMsgIn.GetIntObj: Object has no data. Check with Exists method first Data Transform error. CSSEAIIntMsgOut.CreateIntObj: No PropertySet Data Transform error. CSSEAIIntMsgOut.CreateIntObj: Multiple 'CreateIntObj' calls on the same CSSEAIIntMsgOut object. An Integration Message can have only one Integration Object
Error Message #
Error Code
4,070 SBL-EAI-04070
4,071 SBL-EAI-04071
EAI
4,072 SBL-EAI-04072
EAI
4,073 SBL-EAI-04073
EAI
4,074 SBL-EAI-04074
EAI
4,075 SBL-EAI-04075
EAI
EAI EAI
4,078 SBL-EAI-04078
EAI
4,079 SBL-EAI-04079
EAI
4,081 SBL-EAI-04081
EAI
4,082 SBL-EAI-04082
EAI
96 of 117
Message Text Data Transform error. CSSEAIIntMsgOut.CreateIntObj: Specified Integration Object name is different than the name specified in the Service argument.\n CreateIntObj 'name' argument: '%1'\n %2 Service argument: '%3' Data Transform error. CSSEAIIntMsgIn constructor: First PropertySet child should have type '%1'. Actual type is '%2' Data Transform error. CSSEAIIntObjIn.GetPrimaryIntComp: Requested Integration Component name does not match data.\n Requested Name: '%1'\n Actual Name: '%2' Data Transform error. CSSEAIIntObjIn.GetPrimaryIntComp: No active instance. Call FirstInstance or NextInstance before accessing instances.\n Object: '%1'\n Num Instances: %2 Data Transform error. CSSEAIIntObjIn.GetPrimaryIntComp: No more instances.\n Object: '%1'\n Num Instances: %2 Data Transform error. CSSEAIIntObjOut.CreatePrimaryIntComp: No Integration Object Instance. Call NewInstance before CreatePrimaryIntComp.\n Integration Object: '%1'\n New Integration Component: '%2' Data Transform Error. %1: Invalid Map Function Argument Type: '%2' Data Transform error. Specified map '%1' is not a function Data map '%1' not found. Data Transform error. EAICreateMimeMsgOut: PropertySet is null Data Transform error. CSSEAIMimeMsgIn constructor: First PropertySet child should have type '%1'. Actual type is '%2' Data Transform error. %1: No Source Integration Component. Call SetCopySource with a valid Integration Component before calling CopyFieldValue.\n Component: '%2'\n Target Field: '%3'\n Source Field: '%4'
Error Message #
Error Code
4,083 SBL-EAI-04083
4,080 SBL-EAI-04080
EAI
4,084 SBL-EAI-04084
EAI
4,085 SBL-EAI-04085
EAI
4,086 SBL-EAI-04086
EAI
4,087 SBL-EAI-04087
EAI
4,088 SBL-EAI-04088 4,089 SBL-EAI-04089 4,090 SBL-EAI-04090 4,091 SBL-EAI-04091 4,092 SBL-EAI-04092
4,093 SBL-EAI-04093
EAI
97 of 117
Message Text Data Transform error. %1: No attachment source. Call SetAttachmentSource with a valid Integration Message or other attachment source before calling CopyAttachment.\n Target: '%2' Data Transform Error. %1: Input Property Set does not have an 'XML Hierarchy', a child Property Set with type '%2' Data Transform Error. %1: Input Property Set does not have an 'XML root element' Data Transform error. The input does not contain an Integration Message Data Transform error. The function to run must be provided using the '%1' argument in the input message Data Transform error. No map function specified Data map name is missing. Data Transform error. CSSEAIValueMap: No entries for Type/Direction pair.\n Type: '%1'\n Direction: '%2' Data Transform Error. No entry for lookup key in EAI Value Map.\n Key: '%1'\n Type: '%2'\n Direction: '%3' Service method argument 'OutputIntObjectName' must match with the target integration object specified in data map '%1'. Target component validation expression '%1' fails in component map '%2'. Source component validation expression '%1' fails in component map '%2'. Data Transform error. CSSEAIPrimaryIntCompOut.NewRecord: Multiple 'NewRecord' calls on the CSSEAIPrimaryIntCompOut object. A Primary Integration Component can have only one record.\n Component: '%1' Type mismatch in assignment to target field '%1'. Validation of data map '%1' has failed. Data Map validation succeeded. Source component search specification '%1' is not a boolean expression. Cannot convert Integration Object Hierarchy to XML Hierarchy.
Error Message #
Error Code
4,094 SBL-EAI-04094
4,099 SBL-EAI-04099
EAI
102 SBL-DAT-00102
DAT
4,101 SBL-EAI-04101
EAI
4,105 SBL-EAI-04105 5,218 SBL-EAI-05218 4,106 SBL-EAI-04106 4,107 SBL-EAI-04107 4,108 SBL-EAI-04108
98 of 117
Message Text If SiebelMessage header is not present, either Integration Object Name or an Integration Object Name Lookup RuleSet should be specified in order to convert XML Document to a Siebel Message Cannot convert XML Hierarchy to Integration Object Hierarchy. Cannot convert XML Hierarchy to XML Document. Cannot convert XML Document to XML Hierarchy. XMLHierarchy should contain at least one child for XML root element '%1' expecting only 1 child of type XMLHierarchy under Service Method Arguments Expecting only 1 child of type SiebelMessage under XMLHierarchy Cannot connect to the server HTTP Internet Exception during '%1': '%2', code: '%3' HTTP Request error during '%1': '%2' HTTP Server Error during '%1'. Symbol (id): '%2', Message: '%3' An unknown error has been encountered in %1. The %1 field is missing or invalid for the %2 %3. Attempting to set %1 as the root component for the integration object (%2), but it already has a root component set (%3). Error Base64-decoding binary attachment with ContentId: '%1' Field with XML tag '%1' and XML Style of 'Attribute' is not found in the definition of EAI Integration Component '%2' Field '%1' with XML style of ComponentPCDATA cannot be a child of another field '%2'. Please check the integration object definition. Component Container Element XML tag '%1' should be unique in the XML representation. Check component definitions inside component '%2' XML Hierarchy should have only ONE child of type '%1' EAI Message header is not found in the XML Hierarchy
Error Message #
Error Code
4,109 SBL-EAI-04109
4,111 SBL-EAI-04111 4,112 SBL-EAI-04112 4,110 SBL-EAI-04110 4,113 SBL-EAI-04113 4,457 SBL-EAI-04457
4,114 SBL-EAI-04114 4,115 SBL-EAI-04115 4,116 SBL-EAI-04116 4,117 SBL-EAI-04117 4,118 SBL-EAI-04118 12,000 SBL-EAI-12000 12,001 SBL-EAI-12001 12,002 SBL-EAI-12002
EAI EAI
4,122 SBL-EAI-04122
EAI
4,123 SBL-EAI-04123
EAI
EAI EAI
99 of 117
Message Text Error adding child property set for element '%1' to parent property set of type '%2' Element with XML tag '%1' is not found in the definition of EAI Integration Component '%2' Field definition with XML tag not found '%1' while processing field '%2' children. Check integration component '%3' definition. Invalid XML representation: field '%1' should not be represented as XML attribute '%2' Field XML tag '%1' should be unique in the XML representation. Check field definitions inside component '%2' XML parent field '%1' for field '%2' is not found in the instance of integration component '%3' XML tag '%1' is invalid tag. Expected xml tag '%2' for integration object '%3' Integration Object XML Hierarchy should have only ONE child with XML tag '%1' for Integration Object '%2' XML XML tag '%1' is invalid tag. Expected tag '%2' for integration object '%3' root component '%4' xml container element Integration Object '%1' XML Hierarchy should have only ONE child of type '%2' for root component '%3' container. Detected multiple children. Integration Object XML Hierarchy should have only one Property Set child for Root Component XML Could not find definition for Integration Component '%1' XML Tag is undefined for Integration Component '%1'.\nPlease check the Component definition. Component '%1' character data encountered: '%2'. Field with XML style of 'ComponentPCDATA' should be present in the definition of the EAI Integration Component This business service is not allowed to use integration object '%1'. ModId field '%1' in the integration component '%2' contains a non-integer value '%3'. Please check your Status Key definition. Invalid view mode '%1' defined for integration object '%2'. Invalid 'Direction' for EAI Lookup Map: '%1'
Error Message #
Error Code
EAI EAI
4,131 SBL-EAI-04131
EAI
EAI EAI
4,135 SBL-EAI-04135
EAI
4,136 SBL-EAI-04136
EAI
4,134 SBL-EAI-04134
EAI
EAI EAI
4,139 SBL-EAI-04139
EAI
EAI EAI
EAI EAI
100 of 117
Message Text EAI Lookup Map: Lookup Failure. Type: '%1' Direction: '%2' Key: '%3' Memory allocation failure Invalid method for EAI Lookup Service: '%1' Error allocating memory for '%1' Unable to create MIME basicpart Unable to create MIMEHierarchy from a SiebelMessage Unable to create the MIME message Unable to create SiebelMessage from a MIMEHierarchy Unable to create MIME message Type was '%1', expecting 'Document' Child property set of service method arguments should have type 'MIMEHierarchy' Unable to create input stream. The following error is reported '%1'. Unable to create MIME property set representation Unable to create MIME multipart No children exist or child is not of either type 'MIMEHierarchy' or 'Document' Unable to create output stream. The following error is reported '%1'. Unable to parse the MIME message. The following error is reported '%1'. Unable to write to output stream. The following error is reported '%1'. ModId field '%1' absent from the instance of integration component '%2' Input '%1' missing No input objects to process Output '%1' missing Required property '%1' is not set for Business Service '%2' No field of type DTYPE_ATTACHMENT is found. Integration Component Instance unable to support file attachments Integration component '%1' doesn't have any ModId fields in the status key '%2' No status key defined for integration component '%1' Error getting Integration Object Definition for '%1' Parameter '%1' required for function '%2' The wizard needs parameter '%1' but could not find it in the '%2' configuration section No tables were selected
Error Message #
Error Code
Message Facility EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
4,143 SBL-EAI-04143 4,144 SBL-EAI-04144 4,145 SBL-EAI-04145 4,146 SBL-EAI-04146 4,147 SBL-EAI-04147 4,148 SBL-EAI-04148 4,150 SBL-EAI-04150 4,149 SBL-EAI-04149 4,150 SBL-EAI-04150 4,151 SBL-EAI-04151 4,152 SBL-EAI-04152 4,153 SBL-EAI-04153 4,154 SBL-EAI-04154 4,155 SBL-EAI-04155 4,156 SBL-EAI-04156 4,157 SBL-EAI-04157 4,158 SBL-EAI-04158 4,159 SBL-EAI-04159 4,160 SBL-EAI-04160 4,164 SBL-EAI-04164 4,165 SBL-EAI-04165 4,166 SBL-EAI-04166 4,167 SBL-EAI-04167 4,161 SBL-EAI-04161
4,162 SBL-EAI-04162 4,163 SBL-EAI-04163 4,168 SBL-EAI-04168 4,169 SBL-EAI-04169 4,170 SBL-EAI-04170 4,171 SBL-EAI-04171
101 of 117
Message Text The wizard found no information when querying the specified datasource. This can also happen if the login specified does not have sufficient privileges to query for tables or if the database tableowner is case sensitive and does not match what is specifie Cannot find definition for integration component field '%1' in Integration Component '%2' in Integration Object '%3' Error converting property set hierarchy to integration object hierarchy. Cannot find integration component corresponding to property set with type '%1' Cannot find integration component field definition (Integration Component '%1', Integration Object '%2';) corresponding to the property '%' (Property Set Type '%4') Corrupted component '%1' information - bad reference to component instance (internal) Component instance does not contain definition for component '%1' '%1' cannot be on both sides of %2: '%3' in query specification '%4' Information about integration component '%1' not found. Check query specification and output integration object definition. A value or a wildcard expected on the right side of query specification item. Valid format: [<component>.<field>] = <value text> Information about integration component field '%1' not found. Check query specification and fields defined for integration component '%2' Identifier expected on the left side of query specification item. Valid format: [<component>.<field>] = <value text> Unsupported %1: '%2' in query specification '%3' Fields from different components are unsupported in %1: '%2' in query specification '%3' Invalid search specification '%1'. Valid format: [<component>.<field>] = <value text> Invalid conjunction at the beginning of expression: %1 Invalid expression: %1
Error Message #
Error Code
4,172 SBL-EAI-04172
4,468 SBL-EAI-04468
EAI
4,469 SBL-EAI-04469
EAI
4,470 SBL-EAI-04470
EAI
4,459 SBL-EAI-04459
EAI
4,177 SBL-EAI-04177
EAI
4,178 SBL-EAI-04178
EAI
EAI EAI
4,181 SBL-EAI-04181
EAI
EAI EAI
102 of 117
Message Text Field '%1' in the integration component '%2' instance contains invalid query expression: %3 Invalid operator: %1 Missing open parenthesis at the beginning of expression: %1 Unexpected text: %1 Unmatched parenthesis: %1 Unmatched quotes: %1 Unquoted value: %1 Integration component field '%1' has a dependency on the field '%2' that does not exist in the integration component '%3' No updates are allowed in Integration Component field '%1' in Integration Component '%2'. No deletes are allowed in Integration Component '%1'. No inserts are allowed in Integration Component '%1'. No updates are allowed in Integration Component '%1'. BookId '%1' is invalid or User has no required permission to access the specified Book. Invalid value %1 specified for the method argument 'BookName'. Unable to retrieve Book Of Business Business Component Picklist validation of field '%1' in integration component '%2' didn't find any matches satisfying the query '%3', and an attempt to create a new record through the picklist failed. Cannot create integration object for weakly typed schema. None of the global %1s from schema referred to by '%2' element namespace '%3' could be imported/included) XML Tag '%1' in field '%2' of Integration Component '%3' has been defined differently in a previous field. Please ensure that either the XML Tag is unique or both fields have the same properties. XML Schema generator does not support different XML namespaces for XML Tag and XSD Type in the integration object definition. XMLTagNamespace='%1', XSDTypeNamespace = '%2' The business object (%1) was not found in the repository, %2.
Error Message #
Error Code
13,002 SBL-EAI-13002
13,006 SBL-EAI-13006 13,008 SBL-EAI-13008 13,010 SBL-EAI-13010 13,004 SBL-EAI-13004 13,005 SBL-EAI-13005 13,007 SBL-EAI-13007 11,000 SBL-EAI-11000
4,182 SBL-EAI-04182
EAI
4,183 SBL-EAI-04183 4,184 SBL-EAI-04184 4,185 SBL-EAI-04185 4,471 SBL-EAI-04471 4,472 SBL-EAI-04472 4,473 SBL-EAI-04473 4,186 SBL-EAI-04186
9,000 SBL-EAI-09000
EAI
4,187 SBL-EAI-04187
EAI
4,449 SBL-EAI-04449
EAI
12,502 SBL-EAI-12502
EAI
103 of 117
Message Text The input parameter %1 is missing or invalid for the Siebel Synchronization Wizard. The Integration Object "Siebel OM: Repository Integration Object" was not found in repository, %1. The %1 field is missing or invalid for the %2 %3. An inactive or invalid business component '%1' is being referenced by %2 '%3' Field %1 referenced in user property %2 doesn't exist in business component %3 List Type '%1' is not supported Cannot create integration object: Invalid Root Integration Component. Please check the Primary Business Component to see if it is valid An invalid search spec was specified on object '%1': Field Name: '%2', Search Spec Value:' %3' Cannot find repository table '%1'. Please check your system configuration An error occurred executing Buscomp '%1' An invalid EAI Message was received. Please check your configuration The Siebel Repository was not specified. The repository name must be provided in the input EAI Message property 'RepositoryName' An error occurred getting Business %1 named '%2' Non-existing Link '%1' specified in the definition of Business Object. Cannot create integration object for business object '%1': You must define a Primary Business Component for this business object An error occurred processing buscomp '%1' for MVG '%2'. Error in '%3' Field '%1' is missing or invalid Error getting root component Error creating object instance Error getting child component An invalid EAI Message was received. Please check your configuration Invalid integration component Invalid integration object Required message header property 'IntObjectName' is missing or invalid '%1' is not a valid snapshot type
Error Message #
Error Code
12,503 SBL-EAI-12503 4,188 SBL-EAI-04188 4,189 SBL-EAI-04189 4,190 SBL-EAI-04190 4,191 SBL-EAI-04191
4,192 SBL-EAI-04192
EAI
4,200 SBL-EAI-04200 4,201 SBL-EAI-04201 4,202 SBL-EAI-04202 4,203 SBL-EAI-04203 4,204 SBL-EAI-04204 4,205 SBL-EAI-04205 4,206 SBL-EAI-04206 4,207 SBL-EAI-04207 4,208 SBL-EAI-04208 4,209 SBL-EAI-04209
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
104 of 117
Message Text '%1' is a required service method argument Mod number of the new data is smaller than the old data Not enough memory available. Snapshot does not exist for '%1' with '%2' = '%3' Field '%1' is missing or invalid for root component of integration object '%2' Error getting '%1' A empty or invalid EAI Message was received. Please check your configuration '%1' is a required service method argument Cannot transcode from '%1' to '%2' Dispatch service: '%1', method: '%2' had an error The parameter specification of (Dispatch Service, Dispatch Method), (Dispatch Rule Set) or (Dispatch Workflow Process) is mutually exclusive Execution of requested external function in the DLL failed Error flushing a file Attempting to read from a file not opened for reading Attempting to write to a file not opened for writing Unable to open file '%1' Error reading from file Error writing to file The parameter specification of (Dispatch Service, Dispatch Method), (Dispatch Rule Set) or (Dispatch Workflow Process) is incomplete Make sure that parameter '%1' is set to 'false' if binary data is expected.\nBinary data has been encountered at position '%2'. AMI error when trying to: %1\r\nException: %2\r\nSource: %3\r\nAMI Error Code: %4\r\nMQSeries Error Code: %5 AMI warning when trying to: %1\r\nException: %2\r\nSource: %3\r\nAMI Error Code: %4\r\nMQSeries Error Code: %5 MQSeries Begin Transaction failed: Queue Manager: '%1', Queue: '%2'\r\nMQSeries Error Code: %3 MQSeries Commit Transaction failed: Queue Manager: '%1', Queue: '%2'\r\nMQSeries Error Code: %3
Error Message #
Error Code
Message Facility EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
4,210 SBL-EAI-04210 4,211 SBL-EAI-04211 4,212 SBL-EAI-04212 4,213 SBL-EAI-04213 4,214 SBL-EAI-04214 4,215 SBL-EAI-04215 4,216 SBL-EAI-04216 4,217 SBL-EAI-04217 4,460 SBL-EAI-04460 4,218 SBL-EAI-04218 4,219 SBL-EAI-04219
4,220 SBL-EAI-04220 4,221 SBL-EAI-04221 4,222 SBL-EAI-04222 4,223 SBL-EAI-04223 4,224 SBL-EAI-04224 4,225 SBL-EAI-04225 4,226 SBL-EAI-04226 4,227 SBL-EAI-04227
4,228 SBL-EAI-04228
EAI
4,229 SBL-EAI-04229
EAI
4,230 SBL-EAI-04230
EAI
4,231 SBL-EAI-04231
EAI
4,232 SBL-EAI-04232
EAI
105 of 117
Message Text Unable to connect to MQSeries Queue Manager '%1'\r\nMQSeries Error Code: %2\r\nPlease check your MQSeries configuration and verify that the queue manager is running. Unable to get a message from MQSeries Queue '%1'\r\nMQSeries Error Code: %2 MQMD_S_In_CodedCharSetId value set is incorrect. Please consult MQSeries documentation for further information. MQMD_S_In_Encoding value set is incorrect. Please consult MQSeries documentation for further information. MQMD_S_In_Expiry value set is incorrect. Please consult MQSeries documentation for further information. MQMD_S_In_MsgType value set is incorrect. Please consult MQSeries documentation for further information. MQMD_S_In_Persistence value set is incorrect. Please consult MQSeries documentation for further information. MQMD_S_In_Priority value set is incorrect. Please consult MQSeries documentation for further information. Unable to determine MQSeries AccountingToken. Please consult MQSeries documentation for further information. Unable to determine MQSeries CCSID for: %s. Please consult MQSeries documentation for further information. Unable to determine MQSeries CorrelId. Please consult MQSeries documentation for further information. Unable to determine MQSeries GroupId. Please consult MQSeries documentation for further information. Unable to extract MQSeries message ID when receiving message ReplyToQ or ReplyToQMgr info not provided for MQSeries AMI request Unable to extract MQSeries message ID when sending message WebSphere MQ functionality not supported in a thread-pooled object manager. Corrective Action: Shut down the object manager and bring it up in a non thread-pooled mode.
Error Message #
Error Code
4,233 SBL-EAI-04233
EAI EAI
4,362 SBL-EAI-04362
EAI
4,361 SBL-EAI-04361
EAI
4,358 SBL-EAI-04358
EAI
4,360 SBL-EAI-04360
EAI
4,363 SBL-EAI-04363
EAI
4,364 SBL-EAI-04364
EAI
4,367 SBL-EAI-04367
EAI
4,365 SBL-EAI-04365
EAI
4,366 SBL-EAI-04366
EAI
106 of 117
Message Text Unable to open MQSeries Queue '%1'\r\nMQSeries Error Code: %2\r\nPlease check the MQSeries configuration and verify that the specified queue exists. Unable to put a message to MQSeries Queue '%1'\r\nMQSeries Error Code: %2 MQSeries Rollback Transaction failed: Queue Manager: '%1', Queue: '%2'\r\nMQSeries Error Code: %3 Invalid connection state. This can happen if service '%1' has attempted an illegal dispatch to itself through dispatch service '%2' Service '%1' attempting an illegal dispatch to itself Unknown exception caught while trying to %1 Method '%1' is not defined for Service '%2' XML string is empty 'Target Integration Object' field for channel object '%1' is empty or invalid Error getting '%1' Channel '%1' is not found The format of the message does not match (IntObjName, IntObjInst) Component type '%1' has more than one (exactly '%2') child type '%3' - child type should be unique. Validation failed for EAI Integration Object message of type '%1' - %2 errors were found External-required field '%1' of component '%2' is missing on the integration object instance. XML parent/grandparent field '%1' of field '%2' on component '%3' is missing. Cannot parse schema definitions from WSDL 'types' element. Message '%1' with part '%2' refers to schema using element='%3'. For use='encoded', parts should refer to schema using 'type'. Message '%1' with part '%2' refers to schema using type='%3'. For use='literal', parts should refer to schema using 'element'. Error importing XML schema via method '%1' for '%2' '%3' in '%4' Can not find binding '%1' for port '%2' in WSDL file. Can not find definition of namespace alias '%1' referenced by %2 '%3' in WSDL file.
Error Message #
Error Code
4,238 SBL-EAI-04238
EAI EAI
4,241 SBL-EAI-04241
EAI
4,242 SBL-EAI-04242 4,243 SBL-EAI-04243 4,244 SBL-EAI-04244 4,458 SBL-EAI-04458 4,245 SBL-EAI-04245 4,246 SBL-EAI-04246 4,247 SBL-EAI-04247 4,248 SBL-EAI-04248 4,249 SBL-EAI-04249
4,250 SBL-EAI-04250 4,251 SBL-EAI-04251 4,252 SBL-EAI-04252 8,010 SBL-EAI-08010 8,008 SBL-EAI-08008
8,007 SBL-EAI-08007
EAI
107 of 117
Message Text WSDL document is missing the top level element '%1'. The binding element '%1' is invalid. Message '%1' referenced by operation '%2' %3 message not found in WSDL file. Element '%1' is missing the name attribute. Cannot find portType operation for binding operation '%1'. No schema with URI '%1' (referenced by %2 '%3') found in the WSDL document. Can not find the service %1. The SoapOperation %1 has SoapBody children with different use attribute values. The SoapOperation %1 does not have either an input or output SoapBody child. Type '%1' not defined in WSDL file. Cannot generate WSDL for service '%1' because HTTP port '%2' with protocol '%3' conflicts with HTTP port '%4' with protocol '%5'. Multiple protocols for HTTP ports in the same web service are not supported. Please ensure that if multiple HTTP ports are XMLHierarchy property set should have at least one child for root XML element Integration Object's XML Hierarchy should have exactly one child of type SiebelMessage Cannot find XML namespace declaration for prefix '%1' Invalid qualified name '%1'. Unable to open file '%1' Error getting XML from file '%1'. Error writing XML to file '%1'. '%1' service with method '%2' failed while processing XML from file '%3'. %1 Service requires a 'FileName' parameter '%1' service with method '%2' failed while generating XML to be written to file '%3'. Cannot create integration object for weakly typed schema (containing '%1') Cycle detected in the '%1' schema: %2 '%3' has a cycle Cannot find global '%1' declaration for name: '%2'. Method '%1' of XSD Wizard called before method 'GetList'.
Error Message #
Error Code
Message Facility EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
4,255 SBL-EAI-04255 5,153 SBL-EAI-05153 4,256 SBL-EAI-04256 5,159 SBL-EAI-05159 5,150 SBL-EAI-05150 4,257 SBL-EAI-04257 5,155 SBL-EAI-05155 5,151 SBL-EAI-05151 5,152 SBL-EAI-05152 4,258 SBL-EAI-04258 8,026 SBL-EAI-08026
EAI EAI
10,001 SBL-EAI-10001 10,000 SBL-EAI-10000 4,263 SBL-EAI-04263 4,261 SBL-EAI-04261 4,262 SBL-EAI-04262 4,264 SBL-EAI-04264 4,265 SBL-EAI-04265 4,266 SBL-EAI-04266 9,003 SBL-EAI-09003 9,008 SBL-EAI-09008 9,001 SBL-EAI-09001 9,006 SBL-EAI-09006
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
108 of 117
Message Text targetNamespace '%1' of XML Schema does not match the namespace value '%2' of the 'import' or 'include' tag No root component definition instance found in the input Integration Object. XML Schema document located at '%1' does not contain an XSD schema. XML Schema document located at '%1' could not be parsed. Cannot find schema with targetNamespace: '%1' XSLT Processing Exception: %1 Cannot initialize XSLT system Unable to initialize Xalan for XSLT processing Unable to initialize Xerces for XSLT processing: %1 No XSLT input source Exception terminating XSLT system Cannot create XSLT stylesheet root Error processing the XSLT and/or XML input(s) Server mode is not Upgrade Completed NumOutputObjects Binary Operator Constant Function Identifier Parameter List Unrecognized item Unary Operator Untyped item The record with search specification '%1' in business component '%2' (integration component '%3') has been deleted by another user since it was retrieved. The record with search specification '%1' in business component '%2' (integration component '%3') has been modified by another user since it was retrieved (as indicated by field '%4'). Please requery and redo the update. Abort Transaction Begin Transaction End Transaction The name %1 is already being used for a %2. Renaming the %3 to %4. The field %1 is required. Changing the required and external required values to Y and making the field active.
Error Message #
Error Code
9,009 SBL-EAI-09009
9,007 SBL-EAI-09007 9,005 SBL-EAI-09005 9,004 SBL-EAI-09004 9,002 SBL-EAI-09002 4,267 SBL-EAI-04267 4,268 SBL-EAI-04268 4,269 SBL-EAI-04269 4,270 SBL-EAI-04270 4,271 SBL-EAI-04271 4,272 SBL-EAI-04272 4,273 SBL-EAI-04273 4,274 SBL-EAI-04274 4,275 SBL-EAI-04275 50,014 SBL-EAI-50014 50,015 SBL-EAI-50015 50,016 SBL-EAI-50016 50,017 SBL-EAI-50017 50,018 SBL-EAI-50018 50,019 SBL-EAI-50019 50,020 SBL-EAI-50020 50,021 SBL-EAI-50021 50,022 SBL-EAI-50022 4,289 SBL-EAI-04289
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
4,290 SBL-EAI-04290
EAI
13,012 SBL-EAI-13012 13,013 SBL-EAI-13013 13,014 SBL-EAI-13014 50,032 SBL-EAI-50032 50,033 SBL-EAI-50033
109 of 117
Message Text The user property %1 has an invalid value (%2). The field (%3) is not active or no longer present. The user property will not be written to the synchronized object. The field type for field %1 was invalid. Setting it to data. The integration component key field %1 is inactive. Creating the Parent Key as inactive. The integration component key field %1 references a field (%2) that does not exist. Deleting the Key Field and making the Parent Key inactive. The integration component key field %1 references an inactive field (%2). Creating the Key Field as inactive. The user property %1 has an invalid value (%2). Setting with the default value (%3). Inactivating the user property, %1. It has an invalid value (%2) because the PICKLIST user property is not set. The %1.PickListUserKey contains an inactive or missing field (%2). Removing the field from the value. The %1.PickListUserKey did not contain any active fields. Removing the user property. Field '%1' in Business Component '%2' has been inactivated, because it's a calculated field. Field '%1' in Business Component '%2' has been inactivated, because it's either based on an inner, or inactive join. Business Component '%1' is not based on a table: no User Key could be generated. Unless you manually create at least one User Key, you won't be able to 'upsert' or 'synchronize' it. Non-required user key column '%1' in table '%2' is not mapped to any field in the business component '%3'. Thus, user key '%4' for integration component '%5' may not be complete. Required column '%1' in table '%2' is not mapped to any field in the business component '%3'. Thus, user key '%4' is not being considered for generation of any integration component user keys. %1 defined in '%2' is not supported. Can not find operations for this binding.
Error Message #
Error Code
50,034 SBL-EAI-50034
EAI EAI
50,037 SBL-EAI-50037
EAI
50,038 SBL-EAI-50038
EAI
EAI EAI
50,041 SBL-EAI-50041
EAI
EAI EAI
4,292 SBL-EAI-04292
EAI
4,293 SBL-EAI-04293
EAI
4,294 SBL-EAI-04294
EAI
4,295 SBL-EAI-04295
EAI
EAI EAI
110 of 117
Message Text %1 '%2' can not be imported. %3. Different styles within one binding are not supported. Service '%1' can not be imported, because none of its ports could be imported. Integration object definitions to be generated: for type/element: Internal error invoking method '%1' in %2 '%3'. There are no new integration objects to be generated. Notification is not supported. There is no portType named '%1' for binding '%2'. There are no new outbound proxy business services to be generated. Solicit-Response is not supported. There are no web service definitions to be generated. The %1 '%2' was ignored. %3 for portTypeName: %1 '%2' can not be imported. Can not import its %3. There is no soap:binding address for port '%1', abort this port. Outbound proxy business service definitions to be generated: Schema with targetNamespace: '%1' already exists in WSDL file. Operation '%1' is not supported because style '%2' does not match use '%3'. Following are warnings generated in the process: Web Service definitions to be generated: Required method argument '%1' not passed to outbound web service proxy. Argument '%1' does not have integration object name specified in the current SRF. Protocol '%1' for port '%2' is not supported. SOAP Envelope received is not valid. Business Service '%1' does not exist in current SRF. Business Service '%1' does not have method '%2' defined in the current SRF. The operation returned a malformed response.
Error Message #
Error Code
Message Facility EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
4,331 SBL-EAI-04331 4,332 SBL-EAI-04332 4,333 SBL-EAI-04333 50,026 SBL-EAI-50026 50,027 SBL-EAI-50027 4,334 SBL-EAI-04334 4,335 SBL-EAI-04335 4,336 SBL-EAI-04336 4,337 SBL-EAI-04337 4,338 SBL-EAI-04338 4,339 SBL-EAI-04339 4,340 SBL-EAI-04340 4,341 SBL-EAI-04341 50,028 SBL-EAI-50028 4,343 SBL-EAI-04343 4,342 SBL-EAI-04342 4,344 SBL-EAI-04344 4,345 SBL-EAI-04345 4,346 SBL-EAI-04346 50,029 SBL-EAI-50029 50,030 SBL-EAI-50030 4,347 SBL-EAI-04347 4,296 SBL-EAI-04296 4,297 SBL-EAI-04297 4,298 SBL-EAI-04298 4,299 SBL-EAI-04299 4,300 SBL-EAI-04300 4,302 SBL-EAI-04302
111 of 117
Message Text Outbound webservice proxy '%1' cannot be configured to call itself recursively using transport 'Local Business Service'. Please check the webservice configuration. SOAPAction '%1' is of invalid format: SOAPAction should be of the form "rpc/operationName" or "document/operationName". There is no active Web Service with inbound port type named '%1'. Language dependent value '%1' of field '%2' could not be translated to language independent code. Argument '%1' for Operation '%2' is not known. MQ Address '%1' is badly formatted. The address should be of the form mq://<queue>@<queuemanager> MSMQ Address '%1' is badly formatted. The address should be of the form msmq://<queue>@<queuemanager> No ports were initialized for Web Service named '%1' having namespace value '%2'. Operation '%1' of Web Service '%2.%3' at port '%4' failed with the following explanation: "%5". Operation '%1' of Web Service '%2.%3' at port '%4' failed, because SOAP Body of the response did not contain expected child element '%5'. Operation '%1' of Web Service '%2.%3' at port '%4' failed, because SOAP Body of the response contained child element '%5' instead of expected '%6'. Operation '%1' is expecting a response but no response was received. Operation '%1' is not expecting a response but a response was received. Operation name '%1' already exists, and is required to be unique across all inbound Web Services. There is no active Web Service with operation named '%1'. There is no active web service with outbound port type named '%1'. There is no active Outbound Web Service named '%1'. Web Service '%1' does not have a port with name '%2'.
Error Message #
Error Code
8,021 SBL-EAI-08021
8,006 SBL-EAI-08006
EAI
EAI EAI
EAI EAI
4,306 SBL-EAI-04306
EAI
EAI EAI
4,309 SBL-EAI-04309
EAI
4,310 SBL-EAI-04310
EAI
112 of 117
Message Text Error while processing argument %1 for operation %2 Invalid arrayType specified. Cannot extract SOAP Array item type from arrayType '%1'. Non-local reference '%1' used in element '%2' is not supported. Reference to element with id '%1' used in element '%2' cannot be resolved. Namespace value '%1' in SOAPAction does not match Namespace value '%2' in xml tag '%3'. Unable to process SOAP Header child element '%1' with '%2' Transport '%1' is not supported. There is no active Web Service named '%1'. Active Workflow Process named '%1' cannot be found in runtime database '%2'. Operation '%1' has neither input nor output arguments. WSDL cannot be generated for '%1' binding. WSDL cannot be generated for the following reason: '%1' WSDL cannot be generated for webservice '%1' of namespace '%2'. No valid binding has been defined. WSDL cannot be generated for webservice '%1' of namespace '%2'. No valid message has been defined. WSDL cannot be generated for webservice '%1' of namespace '%2'. No valid port type has been defined. WSDL cannot be generated for port '%1' having binding value '%2'. WSDL cannot be generated for port type '%1'. WSDL cannot be generated for binding of port '%1' having transport value '%2'. WSDL cannot be generated for webservice '%1' of namespace '%2'. No valid port has been defined. Global definition for %1 %2 is defined more than once in the XML schema. Global '%1' tag has no attribute 'name'. Global definition for %1 '%2' referred from definition for %3 %4 cannot be found in the XML schema. '%1' tag has no attribute 'name and attribute 'ref'. This is invalid schema.
Error Message #
Error Code
4,316 SBL-EAI-04316 8,005 SBL-EAI-08005 8,003 SBL-EAI-08003 8,004 SBL-EAI-08004 8,025 SBL-EAI-08025
8,000 SBL-EAI-08000 4,317 SBL-EAI-04317 4,318 SBL-EAI-04318 4,319 SBL-EAI-04319 8,002 SBL-EAI-08002 4,320 SBL-EAI-04320 4,321 SBL-EAI-04321 4,322 SBL-EAI-04322
4,323 SBL-EAI-04323
EAI
4,324 SBL-EAI-04324
EAI
4,353 SBL-EAI-04353
EAI
113 of 117
Message Text XML Schema Type '%1' does not have any elements defined. No possible XML document root can be selected for given XML schema. XML schema definition for %1 should have a valid parent element. Global definition for %1 %2 cannot be used as XML document root since it is not found in the XML schema. Namespace alias used in %1 is not supported in the XML schema, expecting %2. Siebel Code Generator cannot allocate enough memory for this transaction. Siebel Code Generator does not support the requested programming language. Method '%1' of business component '%2' (integration component '%3') for record with search specification '%4' returned the following error:"%5" Method '%1' of business component '%2' (integration component '%3') returned the following error:\n"%4" No definition found for the field '%1' in the business component '%2' No rows retrieved corresponding to the business component '%1' Cyclic dependency defined on the fields of the integration component Unable to delete %1 rows for the business component %2 For instance of Integration Component '%1', using user key '%2', a record with identical values already exists in the Siebel database. Please ensure that the field values in the input message are unique. Cannot find picklist based on the field '%1' Insert operation on integration component '%1' failed because a matching record in business component '%2' with search specification '%3' was found. Invalid integration component type for %1 Invalid Integration Object base type '%2' for Siebel Adapter - Expected '%1' Invalid operation defined on the integration component %1 Hierarchy key '%1' in integration component '%2' references a non-existing field '%3'
Error Message #
Error Code
4,356 SBL-EAI-04356
EAI
4,376 SBL-EAI-04376
EAI
4,377 SBL-EAI-04377 4,378 SBL-EAI-04378 4,379 SBL-EAI-04379 4,380 SBL-EAI-04380 4,381 SBL-EAI-04381
EAI EAI
114 of 117
Message Text PageSize method argument cannot be greater than '%1' specified by the server parameter 'MaximumPageSize' Invalid value '%1' defined for the property '%2' Required field is missing in instance of Integration Component '%1' with the user key '%2': %3 Multiple matches found for instance of integration component '%1' using search specification '%2' in the business component '%3', based on user key '%4'. No input message specified for the service method argument No business component field name corresponding to the integration component field '%1' Could not find a business component that corresponds to the integration component '%1' Integration component %1 contains no fields No integration component field corresponding to '%1' Key '%1' for integration component '%2' doesn't contain any key fields Integration Component '%1' is supposed to support File Attachments, but it doesn't include a field whose name contains the string 'FileName'. No user key can be used for the Integration Component instance '%1'. All field values corresponding to the user key '%1' in the integration component '%2' have NULL values No output object type specified in the service method argument Invalid pickmap definition for the field '%1' corresponding to the source field '%2' in the business component '%3' Cannot find entry '%1' in the bounded picklist for the field '%2' in integration component '%3' Update operation on integration component '%1' failed because no matching record in business component '%2' with search specification '%3' could be found. Invalid value '%1' defined for the user property '%2'
Error Message #
Error Code
4,406 SBL-EAI-04406
EAI EAI
4,390 SBL-EAI-04390
EAI
EAI EAI
4,392 SBL-EAI-04392
EAI
EAI EAI
EAI EAI
4,401 SBL-EAI-04401
EAI
4,403 SBL-EAI-04403
EAI
4,405 SBL-EAI-04405
EAI
115 of 117
Message Text As determined by the first instance, all subsequent instances of integration component '%1' should use the same user key '%2' The FK fields defined for component '%1' do not match the PK fields for parent '%2' Invalid Integration Object base type '%2' for SQL Adapter - Expected '%1' Invalid datatype '%1' for component field '%2' Invalid input bind variable specification for field '%1' The primary key values of the leaf component does not point to a valid root Invalid column bind variable specification for field '%1' Input int object contains '%1' leaf components. Expected 1 leaf component. External Name not specified for component '%1' User Key field '%1' not present in component '%2' Could not find target key for component '%1' referred from child '%2' No target key specified for component '%1' None of the user key field values present in component '%1' User key specification for component '%1' does not yield unique rowset Cannot perform %1 on the business component '%2' Update permission on the field '%1' is not granted for the business component '%2' Unable to read XML from location '%1': %2 Unable to read XML from location '%1': %2 Unable to read XML from URL '%1'; and Base URL '%2': %3 Error in XML document: expecting component instance tag %1, found %2 Data element %1 cannot have a child element DataInChildPropertySet is specified, but no child property set is provided XML Document does not have a valid EAI message header Property Set is not a valid EAI Message
Error Message #
Error Code
4,404 SBL-EAI-04404
4,406 SBL-EAI-04406 4,412 SBL-EAI-04412 4,407 SBL-EAI-04407 4,408 SBL-EAI-04408 4,409 SBL-EAI-04409 4,410 SBL-EAI-04410 4,411 SBL-EAI-04411 4,413 SBL-EAI-04413 4,414 SBL-EAI-04414 4,415 SBL-EAI-04415 4,416 SBL-EAI-04416 4,417 SBL-EAI-04417 4,418 SBL-EAI-04418 4,421 SBL-EAI-04421 4,422 SBL-EAI-04422 11,502 SBL-EAI-11502
EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI EAI
11,501 SBL-EAI-11501
EAI
4,423 SBL-EAI-04423 4,424 SBL-EAI-04424 4,425 SBL-EAI-04425 4,426 SBL-EAI-04426 4,427 SBL-EAI-04427
116 of 117
Message Text Empty Output Property Set. Please check to see that the input XML is valid Error reading XML document: invalid escape sequence '%1' in string '%2'.\nThis can occur if reading is done with 'escape names' processing turned on, but the document was not written with escapes. Attribute %1 not valid for integration component %2 For XML Envelopes other than '%1', the envelope dispatch rule set should be specified to convert to standard EAI message header. Error in XML document: expecting XML object tag %1, found %2 Unknown component or field name %1 for parent component %2 Warning in XML Parser at line %1, column %2: %3 Received empty message Updates to this record has been sent by the batch process and should be applied to the database shortly. Please check again soon. Error encountered at workflow "%1", step "%2" No change/update is in effect. Error encountered at workflow "%1", step "%2" No change/update is in effect : %3 No update to this record was detected during the upgrade process. Updates from the old system have already been applied. Request time-out, please try again. Received empty message Error encountered at workflow "%1", step "%2" No change/update is in effect. Error encountered at workflow "%1", step "%2" No change/update is in effect : %3 Send receive timeout
Error Message #
Error Code
11,500 SBL-EAI-11500
4,428 SBL-EAI-04428
EAI
EAI EAI
4,431 SBL-EAI-04431 4,432 SBL-EAI-04432 4,433 SBL-EAI-04433 4,434 SBL-EAI-04434 4,435 SBL-EAI-04435
4,436 SBL-EAI-04436 4,437 SBL-EAI-04437 4,438 SBL-EAI-04438 4,439 SBL-EAI-04439 4,440 SBL-EAI-04440 4,441 SBL-EAI-04441 4,442 SBL-EAI-04442 4,443 SBL-EAI-04443 4,444 SBL-EAI-04444
117 of 117