0 évaluation0% ont trouvé ce document utile (0 vote)
34 vues27 pages
1. The document describes the components and specifications of an electrohydraulic thruster, including its maximum thrust of 300N, maximum piston stroke of 30mm, and operating pressure of 300 bar.
2. It provides calculations for selecting the appropriate piston diameter and rod based on the required thrust force of 300N, involving force balancing equations and material strength calculations.
3. Details are given on calculating the hydraulic forces on the piston when the thruster brake is applied and released, showing a reducing force from 900N to 0N over the stroke of the piston.
1. The document describes the components and specifications of an electrohydraulic thruster, including its maximum thrust of 300N, maximum piston stroke of 30mm, and operating pressure of 300 bar.
2. It provides calculations for selecting the appropriate piston diameter and rod based on the required thrust force of 300N, involving force balancing equations and material strength calculations.
3. Details are given on calculating the hydraulic forces on the piston when the thruster brake is applied and released, showing a reducing force from 900N to 0N over the stroke of the piston.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
1. The document describes the components and specifications of an electrohydraulic thruster, including its maximum thrust of 300N, maximum piston stroke of 30mm, and operating pressure of 300 bar.
2. It provides calculations for selecting the appropriate piston diameter and rod based on the required thrust force of 300N, involving force balancing equations and material strength calculations.
3. Details are given on calculating the hydraulic forces on the piston when the thruster brake is applied and released, showing a reducing force from 900N to 0N over the stroke of the piston.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
Normaly. On Drum Brake with External Shoes and. an
Eketrofydralre Theastor .
f Given bates
# Thruster:
= Max.force max. Stroke 310/25 mm
= Actuation time 0.2 S
-Motor wer 110 W
~ Pressure coke
= Bore. max. outside. Diam. G0 wm/izomm
- Closed hight z= 300 hun
4 Reluasing Lever:
afb] e = 22.5/45/135 wm
* Brake +
a= Drum dias [width 200ft00 mo
um peaipheral speeds 8 mis
ety war gion a4
I Roped a te Electrohydvaubic thruale ia the fuitable rheuster to
disconnect the Laake ; You are askech to:
x Workout the forces auol neachona en diflemnr elements.
teh Complete okncss amalyera for the clemeute based on
the bead iagiaus and hence Select the suikable incternals.
"a eceataade the Saterbe of the etal necoeny te ale
the Panetiony .
Whol is the max.torque ths brake com annect ?
336.337.1
Minimum
‘stroke
Moximum stroke
Electrohvdraulic thrustor
338,