Vous êtes sur la page 1sur 1

1 to 1 Top of tub

Cut line @ original inner fender well View from front drivers side interior Side of body

Notes: 1. Tubs butt up against or within of bottom trunk lid housings. Use a piece of c steel flat stock to tie in as shown in attached images. 2. Tubs, when installed, should be 41" edge to edge from one another. 3. Tub opening is approximately 36 front to rear. Rough cut to less than this at first and fit check often. Trim as needed for final fit.

Floor board 4

Vous aimerez peut-être aussi