Académique Documents
Professionnel Documents
Culture Documents
com
Phone: +49 (0) 62 03/930 20 - 0 Fax: +49 (0) 62 03/930 20 - 40 Website: www.forever-ots.com
TRANSFER INSTRUCTIONS
FOREVER Flex-Soft & FOREVER Flex-Soft Lite
SUBSTRATE TEMPERATURE
200C
(390 F)
PRESSURE
2 - 5 bar
(30 - 70 PSI)
T-Shirt
(100% Cotton)
Polo T-Shirt
(100% Cotton)
200C
(390 F)
2 - 5 bar
(30 - 70 PSI)
Polyester T-Shirt
(100% Polyester)
130C - 140C
(265 - 285 F)
2 - 5 bar
(30 - 70 PSI)
T-Shirt
(50% Cotton, 50% Polyester)
200C
(390 F)
2 - 5 bar
(30 - 70 PSI)
Socks
(55% Cotton, 45% Cashmere)
200C
(390 F)
2 - 5 bar
(30 - 70 PSI)
Jeans
(100% Cotton)
200C
(390 F)
2 - 5 bar
(30 - 70 PSI)
Towels
(100% Cotton)
200C
(390 F)
2 - 5 bar
(30 - 70 PSI)
TRANSFER TIME
60 sec. 30 sec. 60 sec. 30 sec. 30 sec. 20-30 sec. 40 sec. 30 sec. 20 sec.
PRESSURE
2 - 5 bar
(30 - 70 PSI) (30 - 43 PSI)
Rain Jacket
(100% Polyester or Nylon)
Cardboard Umbrella
(100% Polyester or Nylon)
2 - 3 bar 2 - 5 bar
2 bar
2 - 5 bar
(30 - 70 PSI)
Underwear
(Spandex, Polyester)
140C
(285 F)
2 - 5 bar
(30 - 70 PSI)
SoftShell Jacket
(100% Polyester)
130C
(265 F)
2 - 3 bar
(30 - 43 PSI) (30 - 43 PSI) (30 PSI)
2 - 3 bar 2 bar
These instructions are results of a long time research and reflect our highest expectations. Nevertheless they are subject to change. Please refer to our website for the updated applications instructions, tips and tricks! Please find more information on our website www.forever-ots.com
FOREVER Flex-Soft
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer according to the above settings and remove the backing sheet immediately. Cover the design with a sheet of Glossy Finish (silicone paper) and press again for 5 seconds.
40C
Place the Hot Stamping Foil on your image and cover it with 5 sheets of normal paper. Press it for 20 seconds with high/medium pressure. Peel off the Stamping Foil when completely cold. Press the T-Shirt again for 10 seconds with the shiny or matt side of the silicone paper for a Glossy or a Matte Finish.
Inside out
For a fashionable matt metallic look use normal copie paper for finishing.
FOREVER Flex-Soft
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer 30-40 seconds by high pressure and 130C - 140C (265 - 285 F) and remove the backing sheet while completely cold. Cover the design with a sheet of Glossy Finish (silicone paper) and press again for 5 seconds.
40C
Place the Hot Stamping Foil on your image and cover it with 5 sheets of normal paper. Press it for 20 seconds with high/medium pressure. Peel off the Stamping Foil when completely cold. Press the T-Shirt again for 10 seconds with the shiny or matt side of the silicone paper for a Glossy or a Matte Finish.
Inside out
FOREVER Flex-Soft
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer for 3 - 5 seconds by medium pressure and 200C (390 F) and remove the backing sheet immediately. Cover the design with a sheet of Glossy Finish (silicone paper) and press again for 5 seconds. Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer for 3 - 5 seconds by medium pressure and and 200C (390 F) remove the backing sheet while completely cold. Cover the design with a sheet of Glossy Finish (silicone paper) and press again for 5 seconds.
40C
Place the Hot Stamping Foil on your image and cover it with 5 sheets of normal paper. Press it for 20 seconds with high/medium pressure. Peel off the Stamping Foil when completely cold. Press the Jeans again for 10 seconds with the shiny or matt side of the silicone paper for a Glossy or a Matte Finish.
Inside out
FOREVER Flex-Soft
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer 3 - 5 seconds by medium pressure and 200C (390 F) and remove the backing immediately. Cover the design with a sheet of Glossy Finish (silicone paper) and press again for 5 seconds.
40C
Place the Hot Stamping Foil on your image and cover it with 5 sheets of normal paper. Press it for 20 seconds with high/medium pressure. Peel off the Stamping Foil when completely cold. Press the T-Shirt again for 10 seconds with the shiny or matt side of the silicone paper for a Glossy or a Matte Finish.
Inside out
!
FOREVER Flex-Soft Finishing Base
We advise our customers to use the FOREVER Flex-Soft Finishing Base for all Hot Stamping Foil, Flock or Glitter Applications. This is especially very important by Flock and Glitter Applications for better washability. Nevertheless FOREVER Flex-Soft White and FOREVER Flex-Soft Lite White can be used by Hot Stamping Foil Applications.
Inside out
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer for 3 -5 seconds by medium pressure and 200C (390 F) and remove the backing sheet immediately. Cover the design with a sheet of Glossy Finish (silicone paper) and press again for 5 seconds.
Inside out
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer for 30 seconds by medium pressure and 200C (390 F) remove the backing sheet immediately. Cover the design with a sheet of Glossy Finish (silicone paper) and press again for 5 seconds.
TRANSFER INSTRUCTIONS RAIN JACKET & UMBRELLA (100% POLYESTER or 100% NYLON) FOREVER Flex-Soft Lite
TRANSFER TEMPERATURE 150C (300 F) TIME HOT PEEL COLD PEEL 60 sec. 60 sec. + 10 sec. + 10 sec. PRESSURE AUTOMATIC MANUAL 2 - 5 bar low - high (30 - 70 PSI)
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer 60 seconds by medium pressure and 150C (300 F) and remove the backing sheet immediately. Cover the design with a sheet of Glossy Finish (silicone paper) and press again for 10 seconds. Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer 60 seconds by medium pressure and 150C (300 F) and remove the backing sheet while completely cold. Cover the design with a sheet of Glossy Finish (silicone paper) and press again for 10 seconds.
30C
Place the Hot Stamping Foil on your image and cover it with 5 sheets of normal paper. Press it for 20 seconds with high/medium pressure. Peel off the Stamping Foil when completely cold. Press the Rain Jacket or Umbrella again for 10 seconds with the shiny or matt side of the silicone paper for a Glossy or a Matte Finish.
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer 30 seconds by medium pressure and 100C (210 F) and remove the backing sheet while completely cold.
Place the Hot Stamping Foil on your image and cover it with 5 sheets of normal paper. Press it for 20 seconds with high/medium pressure. Peel off the Stamping Foil when completely cold. Press the Cardboard again for 10 seconds with the shiny or matt side of the silicone paper for a Glossy or a Matte Finish.
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer 30 seconds by low pressure and 180C (455 F) and remove the backing paper immediately.
Place the Hot Stamping Foil on your image and cover it with 5 sheets of normal paper. Press it for 20 seconds with high/medium pressure. Peel off the Stamping Foil when completely cold. Press the Backpack again for 10 seconds with the shiny or matt side of the silicone paper for a Glossy or a Matte Finish.
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer 30 seconds by medium pressure and 140C (285 F) and remove the backing sheet immediately. Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer 30 seconds by medium pressure and 140C (285 F) and remove the backing sheet while completely cold.
Place the Hot Stamping Foil on your image and cover it with 5 sheets of normal paper. Press it for 20 seconds with high/medium pressure. Peel off the Stamping Foil when completely cold. Press the Swimwear again for 10 seconds with the shiny or matt side of the silicone paper for a Glossy or a Matte Finish.
30C
Pull the garment in the width and on the lenght to avoid possible cracking after washing.
TRANSFER INSTRUCTIONS UNDERWEAR (95% POLYESTER & 5% SPANDEX (ELASTAN) ) FOREVER Flex-Soft Lite
TRANSFER TEMPERATURE 140C (285 F) TIME HOT PEEL COLD PEEL 20 - 30 sec. 20 - 30 sec. PRESSURE AUTOMATIC MANUAL 2 - 5 bar medium - high (30 - 70 PSI)
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer 20 - 30 seconds by medium pressure and 140C (285 F) and remove the backing sheet immediately.
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer 20 - 30 seconds by medium pressure and 140C (285 F) and remove the backing sheet while completely cold.
Place the Hot Stamping Foil on your image and cover it with 5 sheets of normal paper. Press it for 20 seconds with high/medium pressure. Peel off the Stamping Foil when completely cold. Press the Underwear again for 10 seconds with the shiny or matt side of the silicone paper for a Glossy or a Matte Finish.
40C
Pull the garment in the width and on the lenght to avoid possible cracking after washing.
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer 40 seconds by medium pressure and 130C (265 F) and remove the backing sheet while completely cold. Cover the design with a sheet of Glossy Finish (silicone paper) and press again for 10 seconds.
30C
Place the Hot Stamping Foil on your image and cover it with 5 sheets of normal paper. Press it for 20 seconds with high/medium pressure. Peel off the Stamping Foil when completely cold. Press the SoftShell Jacket again for 10 seconds with the shiny or matt side of the silicone paper for a Glossy or a Matte Finish.
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer for 1 second from the front side by low pressure. Turn it over and press again from the back side* for 30 seconds by medium pressure and 140C (285 F) and remove the backing sheet while completely cold. Cover the design with a sheet of Glossy Finish (silicone paper) and press again for 20 seconds by high pressure.
30C
Place the Hot Stamping Foil on your image and cover it with 5 sheets of normal paper. Press it for 30 seconds with high/medium pressure. Peel off the Stamping Foil when completely cold. Press the Silk again for 10 seconds with the shiny or matt side of the silicone paper for a Glossy or a Matte Finish.
*Pressing from the back side avoids (reduces) pressure marks of the polyester backing film on the silk.
Cut out the cutlines with a plotter/cutter and weed off the design. Position the transfer on the garment. Press the transfer for 1 second from the front side by low pressure. Turn it over and press again from the back side* for 20 seconds by medium pressure and 120C (250 F) and remove the backing sheet while completely cold. Cover the design with a sheet of Glossy Finish (silicone paper) and press again for 20 seconds by high pressure**. Crumble the leather for an authentic leather look. Place the Hot Stamping Foil on your image and cover it with 5 sheets of normal paper. Press it for 5 - 10 seconds by low pressure. Peel off the Hot Stamping Foil when completely cold! Press the Leather again for 10 seconds with the shiny or matt side of the silicone paper for a Glossy or a Matte Finish.
*Pressing from the back side avoids (reduces) pressure marks of the polyester backing film on the leather. **Use the matt side of the Glossy Finish to keep the leather character.