Académique Documents
Professionnel Documents
Culture Documents
ISO 128
ISO 128 is an international standard (ISO), about the general principles of presentation in technical drawings, more specific the graphical representation of objects on technical drawings.[1]
Overview
Since 2003 the ISO 128 standard contains twelve parts, which had been initiated between 1996 and 2003. It starts with a summary of the general rules for the execution of technical drawings, as well as presenting the structure. Further it describes basic conventions for lines, views, cuts and Sections, and different types of engineering drawings, such for mechanical engineering and construction in architectural, civil engineering, shipbuilding etc. It is applicable to both manual and computer-based drawings, but it is not applicable to three-dimensional CAD models.[1] The ISO 128 replaced the previous DIN 6 standard about drawings, projections and views, which was first published in 1922, and later updated in 1950 and 1968. The ISO 128 itself was first published in 1982, contained 15 pages and "specified the general principles of presentation to be applied to technical drawings following the orthographic projection methods".[2] Several parts of this standard have been updated by individual parts and eventually the last parts and the whole standard as a whole has been withdrawn by the ISO in 2001.
ISO 128
ISO 128 ISO 8560:1986 Technical drawings -- Construction drawings -- Representation of modular sizes, lines and grids ISO 8560:1986 Technical drawingsConstruction drawingsRepresentation of modular sizes, lines and grids ISO 8826-1:1989 Technical drawingsRolling bearingsPart 1: General simplified representation ISO 8826-2:1994 Technical drawingsRolling bearingsPart 2: Detailed simplified representation
ISO 9222-1:1989 Technical drawingsSeals for dynamic applicationPart 1: General simplified representation ISO 9222-2:1989 Technical drawingsSeals for dynamic applicationPart 2: Detailed simplified representation ISO 9958-1:1992 Draughting media for technical drawingsDraughting film with polyester basePart 1: Requirements and marking ISO 9961:1992 Draughting media for technical drawingsNatural tracing paper ISO 10209-1:1992 Technical product documentationVocabularyPart 1: Terms relating to technical drawings: general and types of drawings ISO 10578:1992 Technical drawingsTolerancing of orientation and locationProjected tolerance zone ISO 10579:1993 Technical drawingsDimensioning and tolerancingNon-rigid parts ISO 13567 is an international Computer-aided design (CAD) layer standard. ISO 13715:2000 Technical drawingsEdges of undefined shapeVocabulary and indications ISO 15786:2008 Technical drawingsSimplified representation and dimensioning of holes
References
[1] ISO 128-1:2003 Abstract (http:/ / www. iso. org/ iso/ iso_catalogue/ catalogue_tc/ catalogue_detail. htm?csnumber=32462). Accessed 1 March 2009. [2] ISO 128 (http:/ / www. techstreet. com/ cgi-bin/ detail?product_id=23666) techstreet.com, 2009.)
License
Creative Commons Attribution-Share Alike 3.0 Unported //creativecommons.org/licenses/by-sa/3.0/