Académique Documents
Professionnel Documents
Culture Documents
17 June 2004 The Jumper Pin for Serial #2 on a DTE board should be set correctly to connect Security Button Controller (NQE-3153) and DTE (NDZ-127). If the Jumper Pin setting is wrong, user cannot transmit Security Alert. Confirm the Jumper Pin setting according to the following procedure and if the setting is wrong, change the correct setting. There are three-type DTE boards, each board has different setting.
1.Remove the 6-rear panel fixing screws. 2.Confirm the DTE board type (CDJ-1557A/CDJ-1744A/CDJ-1744B). 3.Confirm the Jumper Pin setting. If the setting is wrong, change the correct setting. 4.Attach the rear panel with six rear panel fixing screws.
-1/4-
-2/4-
-3/4-
-4/4-