Académique Documents
Professionnel Documents
Culture Documents
Materia l Transmittal No :
Reviewed By : H.G
Clause #
Specification Requirements
Remarks
KAHRAMAA Specification for Ductile Iron Pipes and Fittings, Section 4.3 4.3 Polyethylene Sleeving
4.3.1
The polyethylene sleeving shall be manufactured to ISO 8180 and shall have the following additional characteristics: A. The film shall be manufactured in tubular form in blue color (RALThe proposed PE Sleeves are manufactured as per ISO 8180 having a 5000/5001/5005/5010/5017) with a nominal thickness of the film thickness of 225 microns with tolerance of 25 microns. The shall be 225 microns with tolerance of 25 microns. proposed products are blue in color made of polyethylene with no B. The film shall be manufactured from polyethylene or a blend of recycled material used. polyethylene and/or copolymer of ethylene and higher olefins. C. No recycled materials shall be used in the manufacture of the sleeving.
Complied
4.3.2
Tests A. Density: between 910-930 Kg/m3 tested as per ISO/R1183. B. Flow Index: less than 2.5g/600s tested as per ISO/1133. C. Tensile Strength: both directions not less than 8.3 MPa. D. Elongation at Fracture: not less than 300%. E. QA/QC certificate is required. Marking Polyethylene sleeving shall be supplied with a center guideline printed on the middle of the tape. The markings consist of the following; Manufacturers name & logo Date of manufacturing (MM/YY) Width & thickness of the sleeving Size of the Relevant DI pipe in mm
Complied
4.3.3
Complied
Page 1 of 2
Materia l Transmittal No :
Reviewed By : H.G
Clause #
Specification Requirements
Section 4.3
Remarks
Lay flat width KAHRAMAA Specification for Ductile Iron Pipes and Fittings, The lay flat width of PE sleeving for D.I. pipe shall be as follows:
4.3.4
The proposed pipes have a flat width complying with KAHRAMAA Specs.
Complied
4.3.5
Packing Each roll shall be individually packed and placed in a cardboard carton for safe storage. The boxes shall be marked minimum at The proposed products will be packed as per KAHRAMAA Specs. Two places given name and logo of manufacturer, Tender No., Type, Size and quantity of material in black/blue color letters with a minimum height of 50mm.
Complied
Page 2 of 2