Académique Documents
Professionnel Documents
Culture Documents
The DC series covers elegant and very slim digital clocks in 7 segment LED technique for displaying time and date. They differ by the character height of 57, 100 or 180 mm and by four or six-digit time and date display. As a standard function the stopwatch is included in all models. A lot of various synchronization modes are available: Standalone operation with internal quartz or with external DCF time code receiver, mains powered NTP Multicast or Unicast (IP based) in Ethernet or WiFi network, PoE or mains powered Slave clock operation in a wireless WTD system with a transmitter, which sends the time signal, mains powered
DC Series
Slave clock operation, controlled by self-setting MOBALine code, mains powered. Numerous execution variants and options make it possible to fulfill individual customers requests: LED display in red, green, blue or yellow Single- or double-sided clocks Aluminium housings, black or silver-anodised or in any RAL colour Wall mounting, ceiling suspension or wall bracket mounting. Options: Outdoor sensor for temperature display Interface for RS 232, RS 485, IRIG-B External buttons for stopwatch Infrared remote control for easy access to all functions, for the configuration as well as for the stopwatch function.
Mechanics
Anti-reflection front cover made of plexi-glass including a filter layer for best readability over a wide viewing angle. Elegant and very slim clock frame, made of black or silver anodised aluminium profiles. Any RAL colour available on request. Single- or double-sided execution for wall mounting, ceiling suspension or wall bracket mounting.
Synchronisation
Autonomous operation with internal quartz time base with programmable, automatic seasonal time change or with external DCF 77 or GPS time signal receiver. Slave clock operation: MOBALine (self-setting, NTP over Ethernet or WiFi (IEEE 802.11b/g) (IPv6 ready), WTD (Wireless Time Distribution, 868 MHz, NFS87-500), IRIG-B, RS 232 / RS 485.
Stopwatch
Counting upwards from zero up to 24 hours. Counting downwards from a specific value either with stop or with automatic restart at zero or counting into negative values. Display of time intervals, freezing of display, cumulating of time intervals. Counting steps of 1 minute, 1 second or 1/100 seconds. Operation via external buttons or IR remote control unit.
Easy installation and time-saving maintenance due to the back panel which is designed as a mounting plate, on which the clock can be snapped-on and secured with a screw.
Configuration
Alle Dimensionen in Millimetern. Zustzliche 6mm-Distanzelemente werden mitgeliefert
DC.57.4
Setting of the clock parameters by means of two push buttons on top of the clock frame or via IR remote control unit. For NTP and WiFi version DHCP/manual or Telnet configuration is possible. Remote firmware update through the LAN via TFTP.
DC.57.6
DC.100.4
Frame detail
Order reference:
DC . 1 . 2 . 3 . 4 . 5 . 6 . 7 . 8
Digit height 57 mm (height of first 4 digits) 100 mm (height of first 4 digits) 100 mm (height of all 6 digits) 180 mm (height of first 4 digits) 180 mm (height of all 6 digits) Number of digits four digits (HH:MM) six digits (HH:MM SS) Display colour red pure green blue yellow green Clock design single sided double sided Mode of assembly wall mounting (for single clock only) ceiling suspension (conventionally 5, 10, 30, 50 cm) wall bracket Version standard version - autonomous /MOBALine / (un)polarized pulses 24 VDC STD with built-in RS 232, RS 485, IRIG-B interface Ethernet version synchronised by NTP Ethernet version synchronised by NTP and PoE powered WTD wireless synchronisation WiFi version synchronized by NTP Frame colour black silver frame colour, on request Options powered by 24 VDC internal relay Accessoires GPS receiver DCF 77 radiosignal receiver remote IR controller keyborad for stopwatch control, cable 5m temperature sensor two temperature sensors 1 57 100 100x 180 180x 2 4 6 3 R PG B A G 4 N D 5 N S B 6 STD SI NTP PoE WTD WiFi 7 black silver RALxxxx 8 VDC REL GPS 4500 DCF 4500 IR SK TP TP 2
WiFi slave clock Slave DC clock with NTP multicast or unicast synchronization, powered over Ethernet Slave DC clock with MOBALine input GPS 4500 DCF 4500
DTS Masterclock
NTP
LAN TCP/IP
DC.180.4
DC.180.6
Digit height (mm) Number of digits HH:MM HH:MM DD.MM DD.MM DD.MM.YY
SS
DC.57.6 57 / 38 4+2
DC.100.4 100 4
DC.100x.6 100 6
DC.180.4 180 4
DC.180x.6 180 6
HH:MM:SS 8 VA 7 VA 15 VA 14 VA 8 VA 15 VA 10 VA 9 VA 18 VA 15 VA 11 VA 19 VA 8 VA 7 VA 15 VA 14 VA 10 VA 18 VA
10 VA 9 VA 18 VA 15 VA 13 VA 23 VA 11 VA 21 VA 14 VA 26 VA 30 VA 60 VA 42 VA 84 VA 38 VA 75 VA 50 VA 100 VA
45 VA 90 VA 63 VA 126 VA
Powering
100 240 VAC 50 60 Hz 24 VDC 20 % PoE /IEEE 802.3af-Class 0) single-sided single-sided PoE double-sided double-sided PoE
Power consump- single-sided tion (blue and double-sided pure green) Quartz accuracy without at 20 C synchronisation Temperature - 25 to + 80 C accuracy Operating conditions Protection degree Weight (kg) single-sided double-sided Dimensions single-sided L L: Length H H: Height T T: Thickness double-sided L in mm H T Assessories DCF 4500 radio receiver GPS 4500 receiver External temperature sensor with IP 66 protection Keyboard for stopwatch control, cable 5m IR remote control unit
0.1 seconds / day 1.0 C 0 to +50 C. 0 to 95% relative humidity non condensing IP 40, optionally IP 54 2.4 3.1 3.5 6.3 9.3 4.4 5.6 6.0 10.2 15.3 510 652 728 880 1149 169 169 169 264 264 39 39 39 39 39 510 652 728 880 1149 169 169 169 264 264 78 78 78 78 78
MOSER-BAER AG
www.mobatime.com
LE-800295.03