Académique Documents
Professionnel Documents
Culture Documents
Unit ID:
Cognos/PPP304_Reliability _Report
Version No. 1.0 Date 15/02/2010 Changed By Marulvizhi
Test Cases Review and Approval (to be done before testing starts) : Prepared By/Date: Reviewed By/Date: Approved By/Date:
Test Runs (to be filled during testing) : Run Number : Conducted By: Date : 1 2 3
High
Computation Interface
Medium
UI Standards
Low
Configuration Data System
Total
Documentation Others
Phase of Origin
Test Review and approval (to be filled after data consolidation) : All Test Cases have been executed (Y/N) All defects have been closed (Y/N) The number of defects found during unit testing tally with the predicted defect estimates in the Metrics Plan section of the project plan Any other comments: Testing Reviewed By/Date: Testing Approved By/Date:
Page 1 of 12
Test Prerequisites :
Cognos Development server is up and running fine. The PMS EDM oracle schema, PPP_PROVISION schema is available The dimension and fact tables are available in the PPP_PROVISION schema. Sample test data is available in the PPP_PROVISION schema. Valid user is logged into the development server and has permissions to execute the report The PPP304 Reliability Report is available in the following path in the Cognos server, Public Folders > Development > PPP > Reports > Fleet Reliability Reports
Page 2 of 12
1. PPP304-Reliability Report:
S.N o Layout Expected Behavior Run 1 (P/F) Prompt Page: Prompt page header -title Prompt page header Report ID Prompt page buttons at the bottom of the page List of Prompts available: PPP304 Reliability Report PPP304 Cancel Finish 1. Select Type of Report 2. Select Period a. b. Start Date End Date H/M/ L Observed Behavior * Run 2 (P/F) H/M/L Run 3 (P/F) H/M/L
3. Select Incident Status 4. Select Optional Columns Type of Prompts Select Type of Report - Radio Button Select Period a. b. Start Date - Date prompt End Date Date prompt
Select Incident Status Drop down list Select Optional Columns List Box Default selection in the prompts 1. Select Type of Report = Latest Report 2. Select Period 08022710-UTR-Cognos-01
Page 3 of 12
S.N o
Layout
Expected Behavior
a. b.
Start Date = Latest completed months first date End Date = Latest completed months end date
3. Select Incident Status = All 4. Select Optional Columns = no option is selected With default selections of the prompts click on Finish button Report Page: Report Page Header title Report Page Header sub-title Report Page Header parameter block (for default prompt selection) Report Page Header Report ID List of columns displayed for the default prompt selection PPP304 Reliability Report For the period from <start_date> to <end_date> Incident Status: All Report Type: Latest Report Date of Reporting: todays date PPP304 1. 2.
3. 4.
08022710-UTR-Cognos-01
Page 4 of 12
S.N o
Layout
Expected Behavior
1a. Select Date of Reporting - is a date prompt with todays date as the default selection
Report Name: Reliability Report Section 1 : Prompt Page 1.1 Prompt page Layout 1.2 Flow of Prompts and Cascade sources 1.3 Point in Time Prompt 1.4 Default selections in Prompts and display values range in Prompts 1.5 Navigations of buttons functionality(If multiple Prompt pages Applicable) 08022710-UTR-Cognos-01
Testing Date
Status
Remarks
Page 5 of 12
Section 2 : Report Header 2.1 Report Title 2.2 Logo 2.3 Reporting Period 2.4 Report Id Section 3 : Report Body 3.1 Report Format 3.2 Font Size 3.3 Alignment 3.4 Naming conventions 3.5 Report level conditional formatting 3.6 Order of Report Columns 3.7 Sort Order 3.8 Report Column titles 3.9 Report Filter 3.10 Report Level calculations 3.11 Data Format 3.12 No Data Display Option Section 4 : Report Footer 4.1 Page Number 4.2 Text items as per the requirements Section 5 : Naming Conventions 5.1 Page 5.2 Prompt Page 5.3 Query / Tabular Set 5.4 Parameter 5.5 Conditional Variables
08022710-UTR-Cognos-01
Page 6 of 12
1.
Report data has to be filtered with the dates supplied in the prompt page.
Reliability_latest_list. txt
Reliability_IncidentTy pe_Crosstab_latest.txt
Reliability_Peekhour_ Crosstab_Latest.txt
2.
Latest Report: When Start Date and End date is out of range.
08022710-UTR-Cognos-01
Reliability_latest_list. txt
Reliability_IncidentTy pe_Crosstab_latest.txt
Reliability_Peekhour_ Crosstab_Latest.txt
3.
Reliability_POINTINT IME_list.txt
Prompt Page has to be populated with One more Prompt and Report data has to be filtered with the date is selected in that Point in time prompt.
Reliability_IncidentTy pe_Crosstab_Pointintime.txt
Reliability_Peekhour_ Crosstab_Pointintime.txt
08022710-UTR-Cognos-01
Page 8 of 12
4.
Point In Time Prompt Selected. When the Point in time date is in between start date and End date
Prompt Page has to be populated with One more Prompt and Report data has to be filtered from start date to Point in time date.
Reliability_POINTINT IME_list.txt
Reliability_IncidentTy pe_Crosstab_Pointintime.txt
Reliability_Peekhour_ Crosstab_Pointintime.txt
5.
08022710-UTR-Cognos-01
Page 9 of 12
Reliability_incident _status_ALL_list.txt
6.
Reliability_incident _status_open_list.txt
7.
Reliability_incident _status_close_list.txt
08022710-UTR-Cognos-01
Page 10 of 12
8.
Optional Columns Prompt: If we select Incident Location -1. Optional Columns Prompt: If we select Incident Location -2. Optional Columns Prompt: If we select Fault ID / Fault Symptom Optional Columns Prompt: If we select Defect ID / Defect Cause Description Optional Columns Prompt: If we select SET#. Optional Columns Prompt: If we select TRIP# Optional Columns Prompt:
Report has to be displayed with one more column called Incident Location -1. Report has to be displayed with one more column called Incident Location -2. Report has to be displayed with two more columns called Fault ID, Fault Symptom. Report has to be displayed with two more columns called Defect ID , Defect Cause Description. Report has to be displayed with one more column called SET#. Report has to be displayed with one more column called TRIP#. Report has to be displayed with one
Page 11 of 12
9.
10.
11.
12.
13.
14.
08022710-UTR-Cognos-01
If we select CAR#.
more column called CAR#. Report has to be displayed with one more column called Peak Hour . Report has to be displayed with one more column called Availability Period. Report will be displayed extra columns Incident Location -1, Incident Location -2, Fault ID, Fault Symptom, Defect ID , Defect Cause Description, SET#, TRIP#, CAR#, Peak Hour and Availability Period.
15.
Optional Columns Prompt: If we select Peak Hour. Optional Columns Prompt: If we select Availability Period . Optional Columns Prompt: If we select Everything
16.
17.
08022710-UTR-Cognos-01
Page 12 of 12