Académique Documents
Professionnel Documents
Culture Documents
SALIENT FEATURES
High making & breaking capacity Due to Quad break construction. High Electrical & Mechanical life. Compact construction : To ensure light weight low operating torque switch which saves panel space. Easy to maintain contacts. Phase barriers : Interphase barriers are provided to eliminate the possibility of interphase short circuit. Features of FN series : Compact design saves space Electrodynamic Compensation Quad break Contact System Full AC - 23 A rating for the Complete range Highest fused Short Circuit Capacity Quick make / Quickbreak / Positive break Clear ON / OFF indicator Separate arcing / Current carrying zone High clearance & Creepages Separate bridge for each pole Maximum ground Clearance Phase barrier & Terminal Shroud as a Standard accessory Fuse stationary & Isolated from both sides Direct access to mounting & terminal screws Generous terminal capacity Replaceable contacts for enhanced life Suitable for vertical & horizontal orientation Wide range of Spares & Accessories Handle coupling as per IS 8623 Large Ground Clearance to eliminate possibility of phase-ground flash over.
The handle coupling has the following user-friendly features. Large terminals to accommodate Aluminium bus bars. Terminal shrouds, to protect against phase-phase short circuit The terminals can be shrouded for protection against phase-phase short circuit through an external conducting path and also for protection against accidental human contact to live terminals.
Easy fixing of handle on panel door by two screws. Door interlock for safety of operating personnel when switch is ON. The interlock can be defeated if required. Built-in padlocking arrangement to lock the unit in either ON or OFF position. The handle coupling can take a mismatch or 3mm in all directions.
Contact System : Contact system is QUAD BREAK. There are no. of parallel moving contacts per pole per break. Hence, better Arc Quenching & more electrical life of contacts. Each pole has separate bridge, carrying the moving contacts, achieving a high order of interphase separation & avoiding phase-phase flash over.
Built-in neutral : Switch-Disconnector-Fuse consist of an integral neutral, making the units suitable for 3 phase, 4 - wire application. FN 32 / 63 has switched neutral while higher ratings have isolable neutral.
Fuses remain stationery during switching operation. Fuses are isolated from both sides. This offers safety to operating personnel while replacing fuses. The Switch-Disconnector-Fuse units can be mounted at any angle in a vertical plane. SDF Interior in Sheet Steel Enclosure : Complete range of S-D-F is also available in attractive powder coated sheet steel enclosures. FN 32 / 63 in sheet steel enclosure comes fitted with gland plate.
Mechanism : This mechanism is front operated quick-make / quick-break and independent of speed of operation.
TECHNICAL DATA
SWITCH-DISCONNECTOR-FUSE UNITS, TYPE FN CONFORMS TO IS 13947 (PART-3) / IEC 60947-3
TYPE DESIGNATION No. of Poles Neutral # Service temperature Rated operational voltage (Ue) Rated insulation voltage (Ui) Rated impulse withstand voltage (Uimp) Rated Frequency Conventional enclosed thermal current at 400C (Ithe) Rated operational current (le) AC - 23 A utilization category
0
FN 100 3+Neutral Isolable -20 to 50 415 690 8 50 - 60 100 100 1000 800 100 100/HN/00 45 15000 95 50 M 8 x 20
FN 125 3+Neutral Isolable -20 to 50 415 690 8 50 - 60 125 125 1250 1000 100 125/HN/00 57 15000 95 50 M 8 x 20
FN 160 3+Neutral Isolable -20 to 50 415 690 8 50 - 60 160 160 1600 1280 100 160/HN/00 57 15000 185 50 M 8 x 20
FN 200 3+Neutral Isolable -20 to 50 415 690 8 50 - 60 200 200 2000 1600 100 200/HN/0 92 10000 240 120 M 10 x 30
FN 250 3+Neutral Isolable -20 to 50 415 690 8 50 - 60 250 250 2500 2000 100 250/HN/1 115 10000 240 120 M 10 x 30
FN 315 3+Neutral Isolable -20 to 50 415 690 8 50 - 60 315 315 3150 2520 100 315/HN/1 145 10000 400 240 M 10 x 30
FN 400 3+Neutral Isolable -20 to 50 415 690 8 50 - 60 400 400 4000 3200 100 400/HN/2 175 10000 2 x 400 240 M 12 x 40
FN 630 3+Neutral Isolable -20 to 50 415 690 8 50 - 60 630 630 6300 5040 100 630/HN/3 270 10000 2 x 625 400 M 16 x 50
FN 800 3+Neutral Isolable -20 to 50 415 690 8 50 - 60 800 800 8000 6400 100 800/HN/3 270 3000 2 x 625 400 M 16 x 50
Rated making capacity (436 V, cosO=0.35) A Rated breaking capacity (436 V, cosO=0.35) A Rated fused short circuit current kA with L&T fuses, rating A / Type / Size Capacitor duty - Connected415 V, 50 - 60 Hz Mechanical life (Operating cycles) Terminal capacity (main) Terminal capacity (neutral) Terminal screw DC RATING AT 220 V DC No. of poles in series, utilization category at rated current kVAr
35 35 M 6 x 12
mm
3, DC-23 A
3, DC-23 A
2, DC-23 A
2, DC-23 A
2, DC-23 A
2, DC-23 A
2, DC-23 A
2, DC-22 A
2, DC-22 A
2, DC-22 A
2, DC-22 B
* -------- Power factor = 0.45 as required in IS 13947 - (part 3). # ------- For FN 125 to FN 800 Switched - Neutral is available as accessory.
TECHNICAL DATA
SWITCH DISCONNECTOR - TYPE FN Conformance to IS 13947 (Part 3) and IEC: 60947-3
Type Designation No. of poles Neutral Service temperature Rated operational voltage (Ue) Rated insulation voltage (Ui) Rated impulse withstand voltage (Uimp) Rated frequency Conventional Enclosed thermal current at 400C Rated operational current le AC 20 A utilization category AC 21 A utilization category AC 22 A utilization category AC 23 A utilization category DC rating at 220 V DC No. of poles in series, utilization category at rated current Rated making capacity (436 V, cosO-0.35) Rated breaking capacity (436 V, cosO-0.35) Capacitor duty - 415 V 50 - 60 Hz Mechanical life (operating cycles) Terminal capacity (main) Terminal capacity (neutral) Terminal screw Short circuit withstand current (duration 1 secs) Rated fused short circuit current with L&T fuses rating, A / Type Size kA mm2 mm2 mm kA 1.5 80 32 / HF 1.5 80 63 / HF 4 100 100 / HN 00 4 100 125 / HN 00 6 100 200 / HN 0 10 100 250 / HN 1 14 100 315 / HN 1 14 100 400 / HN 2 20 100 630 / HN 3 20 50 800 / HN 3 A A kVAR 3, DC 23 A 320 256 14 15000 35 35 M 6 x 12 3, DC 23 A 630 504 29 15000 35 35 M 6 x 12 2, DC 23 A 1000 800 45 15000 95 50 M 8 x 20 2, DC 23 A 1250 1000 57 15000 95 50 M 8 x 30 2, DC 23 A 2000 1600 92 10000 240 120 M 10 x 30 2, DC 23 A 2500 2000 115 10000 400 120 M 10 x 30 2, DC 22 A 3150 2520 145 10000 400 120 M 10 x 30 2, DC 22 A 4000 3200 175 10000 2 x 400 240 M 12 x 40 2, DC 22 A 6300 5040 270 10000 2 x 625 400 M 16 x 50 2, DC 22 A 8000 6400 270 3000 2 x 625 400 M 16 x 50 2, DC 22 B 10000 8000 270 32 32 32 32 63 63 63 63 100 100 100 100 125 125 125 125 200 200 200 200 250 250 250 250 315 315 315 315 400 400 400 400 630 630 630 630 800 800 800 800 1000 1000 1000 1000
0
SELECTION OF HANDLE
SEEN FROM FRONT OF THE DOOR
SR. NO. HANDLE (OFF) POSITION
1
SWITCH ORIENTATION
DOOR CUT-OUT
1
OR
1
B
OR
0
3
OR
0
4
OR
5
1
A
OR
6
1
B
OR
B
0
OR
A
0
OR
Note : Arrow ( ) indicates position of Interlock Defeat Key Type A : supplied as standard with all S-D-Fs Type B : supplied on request
OVERALL DIMENSIONS
SWITCH-DISCONNECTOR-FUSE TYPE DIN FN 32 / 63
OVERALL DIMENSIONS - FN 32 / 63
A1 6 SQ.
100 MIN
5
47
150
SQ. 65 40
35 83.5
HINGE
128 113.2 29.6 5 55
95
75
16 31 15.1 29 27 27
DRILLING DETAILS FN 32 / 63
55
79
DRILLING DETAILS ON DOOR FOR MOUNTING HANDLE COUPLING SEEN FROM FRONT OF THE DOOR
40 0.25
DRILLING DETAILS ON BASE PLATE FOR MOUNTING SWITCH SEEN FROM FRONT OF THE DOOR 2 HOLES 4 0.1 FOR M3.5 SCREWS HOLES 32 0.25
40 0.25
150 3
170
77.5
TERMINAL SHROUD (OPTIONAL ACCESSORY) 216 (WITH AUX. CONTACT BLOCK) 7 22 5 7 204 160
69 94
26
125
A 154 164
B 20 25
FN 125
75
20 39.6
B 48 47
9 47
2.5
96
83.5 111.5
12.5
247 (WITH AUX. CONTACT BLOCK) 238 188 24.7 M10 BOLT
43.2
B C D
109
210
108.5
136 A
122
142 159
164
OVERALL DIMENSIONS
ASSEMBLY OF HANDLE COUPLING ON DOOR FN 100 / 125 / 160 / 200 / 250
HINGE
54.5
SQ. 90
A3
74.4
60 0.25
HOLES 50 0.25 OPERATING SHAFT CENTER MISMATCH 3 PERMISSIBLE 60 0.25 4 HOLES SUITABLE FOR M6 SCREWS D
TYPE A B D C FN 100 / 125 / 160 26 22 160 125 FN 200 43.2 24.7 188 170 FN 250 43.2 24.7 188 170
10
250
240
17.5
146
291 (WITH AUX. CONTACT BLOCK) 280 215 17 24.5 16.3 5 TERMINAL SHROUD
BOLT'C'
5 9
45.7
137
206
A 103 102
B 220 228
C M10 M12
146
195
43 60.5 70
40 70
174 175
270 260
24.5
200
225.5 250.5 147 8 17 24.5 13.3 5 347 (WITH AUX. CONTACT BLOCK) 336 271 TERMINAL SHROUD 5 45.7 105 137 175 182 48 60 71 90 M16 BOLT 195 218 9
182
238
11
OVERALL DIMENSIONS
ASSEMBLY OF HANDLE COUPLING ON DOOR FN 315 / 400 / 630 / 800
230 150 MIN.
O
54.5 HINGE CHEESE HEAD SCREW DOOR THICKNESS MAX. 2 mm. SQ. 90 74.4 CLEAR INSIDE OF THE CUBICLE 250 3 FOR MOUNTING SWITCH SEEN FROM FRONT OF THE DOOR
600.25
45.7
600.25
12
175
H J
G I A
O K
4 Holes 6.5
Extreme Overall dimension TYPE FN 32 / 63 FN 100 / 125 / 160 FN 200 FN 250 / 315 / 400 FN 630 / 800 A 245 288 335 365 421 B 238 265 265 265 285 C 196 245 265 315 337
Basic Enclosure dimension D 230 273 320 350 406 E 226 253 253 253 273 F 153 183 203 253 273
Cutout for Cables G 190 233 280 310 366 H 73 104 124 185 185
Gl and Plate mounting dimension I J 210 80 253 110 300 130 330 191 386 191
Enclosure mounting dimension K L 170 165 213 193 260 193 300 203 346 223
13
OVERALL DIMENSIONS
SWITCH-DISCONNECTOR-FUSE TYPE BOLTED
6 SQ. 5
FN 32 / 63
FN 100 / 125
O 37 Max Fuse Size A4 According to IS 13703
180
170
83.5
77.5
35
29.6 5
113.2 55 1.2
2 MOUNTING HOLES FOR M4 SCREWS
22 5
204 160 20 9
157.5 129
150
44.5
95 75
79
26
125
16 31 15.1 29 27 27
20 M6 39.6
48
47
47
FN 200 / 250
PHASE BARRIER 111 FUSE SIZE B2 ACCORDING TO IS13703 E
M10 BOLT
96
111.5
247 (WITH AUX. CONTACT BLOCK) 24.7 12.5 M8 BOLT 5 7 238 188 TERMINAL SHROUD
180 210
43.2
109
170 190
108.5
M5 EARTHING SCREW
29 39 55
30 56 56
B 190 206
C 4 5
14
94 136 154
75
122
PHASE BARRIER
250 240
238
146
137
174 200
17 16.3
24.3
45.7
146
137
270 260
147 103 6
17 13.3 5
24.5
182 218
45.7
182
49
71
90
60
90
175 195
117.5
15
ORDERING DETAILS
Fuse Rating (A) 2 4 6 8 10 16 20 25 32 40 50 63 Cat. Nos. SF90144 SF90145 SF90146 SF90147 SF90148 SF90150 SF90151 SF90152 SF90142 SF90143 SF90158 SF90159 14 *51 MM Size Suitable for S-D-F type FN 32, 63 32, 63 32, 63 32, 63 32, 63 32, 63 32, 63 32, 63 32, 63 63 63 63
16
Cat. Nos. SF94940 SF94941 SF94942 SF94027 SF94028 SF94029 SF9430 SF94939 SF94128 SF94129 SF94130 SF94131 SF94132 SF94230 SF94231 SF94232 SF94233 SF94234 SF94332 SF94333 SF94334 SF94335 SF94434 SF94435 SF94436 SF94437 SF94938
Rated watt loss 5.3 6.2 7 5.7 6.9 7.5 9.8 8.3 9.1 11.3 12.7 14.5 10.3 12.3 14.3 17.3 25.5 14.1 16.9 20.2 24.9 20.5 26.7 36.1 42.2 48
Suitable for S-D-Funits type FN or equivalent 100, 125, 160 100, 125, 160 100, 125, 160
Size 00
100, 125, 160 100, 125, 160 100, 125, 160 125, 160 160
Size 0
Size 1
250, 315 250, 315 250, 315 250, 315 250, 315
Size 2
Size 3
Fuse-pulling handle should be used for safe and easy removal of fuse links (for HF : SK91185 & for HN : SF90126)
17
TYPE HQ
Size of the fuse A1 Rating (A) 2 4 6 10 16 20 25 32 20 25 32 50 63 4 6 10 16 20 25 32 35 50 63 80 100 125 80 100 125 125 160 200 250 315 315 355 400 400 500 630 630 Cat. Nos. Suitable for S-D-F units type FN or equivalent 32, 63 32, 63 32, 63 32, 63 32, 63 32, 63 32, 63 32, 63 100, 125, 160 100, 125, 160 100, 125, 160 100, 125, 160 100, 125, 160 100, 125, 160 200 200 200 250, 315 315 400 400 400 630 630 630 Power Loss 0.3 0.5 1.2 1.4 1.8 2.2 2.9 3.0 2.4 3.1 3.4 4.0 4.7 0.8 1.4 1.5 0.2 2.8 3.8 4.4 4.5 6.2 6.8 9.1 6.2 6.8 9.2 10.5 16.0 15.0 19.5 20.5 28 32 32 34 38 38 50 55 58
A1L
A2
A3
A4
B1
B2 B3
B4 C2
C3
ST30736 ST30737 ST30738 ST30739 ST30740 ST30741 ST30742 ST30743 ST34527 ST34528 ST34529 ST35827 ST35828 ST30747 ST30748 ST30749 ST30750 ST30752 ST30753 ST30753 ST30759 ST30760 ST30761 ST30767 ST30768 ST30769 ST30774 ST30775 ST30776 ST30777 ST30778 ST30779 ST30781 ST30782 ST30782 ST30783 ST30784 ST30785 ST30786 ST30787 ST30788
TYPE HG
Rating (A) 2 4 6 10 16 20 25 32 Size F1 F1 F1 F1 F1 F1 F1 F1 Cat. Nos. ST30725 ST30726 ST30727 ST30728 ST30729 ST30730 ST30731 ST30732 Power Loss 0.3 0.5 1.2 1.4 1.8 2.2 2.9 3.0
18
ORDERING INFORMATION
SWITCH-DISCONNECTOR-FUSE AND SWITCH-DISCONNECTOR TYPE FN
ORDERING INFORMATION: Orderig Suffix OOOO for all * Example: FN 32 Interior with handle * Ordering Information - SK95518OOOO
Type Designation Description S-D-F Suitable for DIN Fuses Interior with handle TPN Interior without handle TPN Interior in sheet steel enclosure Interior with handle TP S-D-F Suitable for BS Fuses Interior with handle TPN Switch-Disconnector Interior with handle TPN SK95541 SK955540 SK95571 SK95405 SK95607 SK95653 SK95651 SK95570 SK95009 SK95714 SK95588 SK95518 SK95544 SK95612 SK95421 SK95420 SK95613 SK95569 ST30287 SK95568 SK95001 SK95000 SK95005 ST27894 SK95713 SK95712 SK95715 SK95418 SK95417 SK95511 SK27895 FN 32 (4 Pole) FN 63 (4 Pole) FN 100 FN 125 FN 160 FN 200
Type Designation Description S-D-F Suitable for DIN Fuses Interior with handle TPN Interior without handle TPN Interior in sheet steel enclosure Interior with handle TP S-D-F Suitable for BS Fuses Interior with handle TPN Switch-Disconnector Interior with handle TPN SK95608 SK95609 SK95610 SK95611 SK95551 SK95710 SK95682 SK95590 SK95591 SK95592 SK95642 SK95641 SK95681 ST31731 SK95461 SK95460 SK95514 ST27897 SK95481 SK95480 SK95515 ST27898 SK95521 SK95520 SK95547 ST27899 SK95679 SK95678 SK95705 ST31732 FN 250 FN 315 FN 400 FN 630 FN 800 FN 1000
19
For selection and product demonstration, please contact any of our branch offices listed below:
REGISTERED OFFICE AND HEAD OFFICE L&T House, Ballard Estate P. O. Box 278 Mumbai 400 001 Tel: 022-67525656 Fax: 022-67525858 Website: www.Larsentoubro.com ELECTRICAL STANDARD PRODUCTS (ESP) 501, Sakar Complex Opp. Gandhigram Rly. Station Ashram Road Ahmedabad 380 009 Tel: 079-66304007-11, 55304000/1 Fax: 079-26580491 e-mail: esp-ahm@Lntebg.com 38, Cubbon Road, Post Box 5098 Bangalore 560 001 Tel: 080-25020100 / 25583613 Fax: 080-25580525 e-mail: esp-blr@Lntebg.com 131/1, Zone II Maharana Pratap Nagar Bhopal 462 011 Tel: 0755-6454906 / 7 / 8 / 9 Fax: 0755-2769264 e-mail: esp-bho@Lntebg.com Plot No. 559, Annapurna Complex Lewis Road Bhubaneswar 751 014 Tel: 0674-2537301, 2436696 Fax: 0674-2537309 e-mail: esp-bbi@Lntebg.com SCO 32, Sector 26-D Madhya Marg, P. O. Box 14 Chandigarh 160 026 Tel: 0172-4646841 / 2 / 3 / 4 / 5 / 6 / 7 Fax: 0172-4646802 e-mail: esp-chd@Lntebg.com 10, Club House Road Chennai 600 002 Tel: 044-28462072 / 4 Fax: 044-28462102 e-mail: esp-maa@Lntebg.com 67, Appuswamy Road Post Bag 7156 Opp. Nirmala College Coimbatore 641 045 Tel: 0422-2588120, 2588121 / 3 Fax: 0422-2588148, e-mail: esp-cbe@Lntebg.com
L&T House Group MIG - 5 Padmanabhpur Durg 491 001 Tel: 0788-2213833 / 14 / 28 / 29 Fax: 0788-2213820 A1/11, Astronauts Avenue Bidhan Nagar Durgapur 713 212 Tel: 0343-2536493 / 39 Fax: 0343-2536493 e-mail: esp-dgp@Lntebg.com (Faridabad Switchgear Works) 12/4, Delhi-Mathura Road Faridabad 121 003 Tel: 0129-2565147 / 8 Fax: 0129-2275405 e-mail: esp-fbd@Lntebg.com Milanpur Road, Bamuni Maidan Guwahati 781 021 Tel: 0361-2550565 Fax: 0361-2551308 e-mail: esp-gau@Lntebg.com 5-10-173, Fateh Maidan Road P. O. Box 12 Hyderabad 500 004 Tel: 040-66720251 Fax: 040-23242356 e-mail: esp-hyd@Lntebg.com D-24, Prithvi Raj Road C-Scheme Jaipur 302 001 Tel: 0141-2377374 / 2361064 Fax: 0141-2373280 e-mail: esp-jai@Lntebg.com Akashdeep Plaza, 2nd Floor P. O. Golmuri Jamshedpur 831 003 Jharkhand Tel: 0657-2340864, 2340308 Fax: 0657-2341250 e-mail: esp-jam@Lntebg.com Skybright Bldg. M. G. Road Ravipuram Junction Ernakulam Kochi 682 016 Tel: 0484-4409422 / 23 / 24 / 25 / 26 / 27 Fax: 0484-4409430 e-mail: esp-cok@Lntebg.com 3-B, Shakespeare Sarani Kolkata 700 071 Tel: 033-44002301 / 2 / 3 / 4 / 5, 44002572 Fax: 033-22821025 e-mail: esp-ccu@Lntebg.com
A28,Indira Nagar Faizabad Road Lucknow 226 016 Uttar Pradesh Tel: 0522-4040905 / 903 / 904 Fax: 0522-2311671 e-mail: esp-Lko@Lntebg.com Plot No. 518 4th Main Road K. K. Nagar Madurai 625 020 Tel: 0452-2537404 / 303 Fax: 0452-2537552 e-mail: esp-mdu@Lntebg.com North Wing, Level II, Gate 7, Powai Mumbai 400 072 Tel: 022-67050505 Fax: 022-67051112 e-mail: esp-bom@Lntebg.com 8B, Farmland, Ramdaspeth Behind Hotel Radhika Nagpur 440 010 Tel: 0712-2420641 / 24 Fax: 0712-2420619 e-mail: esp-ngp@Lntebg.com 32, Shivaji Marg, P.O. Box 6223 New Delhi 110 015 Tel: 011-51419500 / 1 , 51419515 Fax: 011-51419600 e-mail: esp-del@Lntebg.com L&T House, P.O. Box 119 191/1, Dhole Patil Road Pune 411 001 Tel: 020-66033395 / 88 / 89 Fax: 020-26129586 e-mail: esp-pnq@Lntebg.com 3rd Floor, Vishwakarma Chambers Majura Gate, Ring Road Surat 395 002 Tel: 0261-2473726 Fax: 0261-2477078 e-mail: esp-sur@Lntebg.com Radhadaya Complex Old Padra Road Near Charotar Society Vadodara 390 015 Tel: 0265-6613611 Fax: 0265-2336184 e-mail: esp-bar@Lntebg.com 48-8-16, Dwarakanagar Visakhapatnam 530 016 Tel: 0891-2755493, 2704928 Fax: 0891-2746075 e-mail: esp-viz@Lntebg.com
Product improvement is a continuous process. For the latest information and special applications, please contact any of our offices listed here.
SP 50452
190607