Vous êtes sur la page 1sur 162

aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing &

shielding

Hydraulic Pump Division


Product Range - HY28-2673-01/HPD/US

WARNING - USER RESPONSIBILITY


FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.

OFFER OF SALE
The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributor. This offer and its accepteance are governed by the provisions stated in the detailed "Offer of Sale" elsewhere in this document.

Copyright 2012, Parker Hannifin Corporation. All Rights Reserved.

(M) P1 Medium Pressure Mobile Piston Pumps 5-16 (I) PD Medium Pressure Industrial Piston Pumps 5-16 (M) P2 High Pressure/High Speed Mobile Piston Pumps 17-20 (M) P3 High Pressure/Super Charged Mobile Piston Pumps 21-24 (I) PVplus High Pressure Industrial Piston Pumps 25-30 (B) Premier Series High Pressure/Performance Piston Pumps31-36 (M) VP1 Load Sensing Truck Pumps 37-40 (B) PAVC Medium Pressure/Super Charged Piston Pumps 41-44 (M) F11 Small Frame Fixed Displacement Bent-Axis Pumps/Motors 45-48 (M) F12 Large Frame Fixed Displacement Bent-Axis Pumps/Motors 49-52 (M) F1 Fixed Displacement Bent-Axis Truck Pumps/Motors 53-56 (M) F2 Twin Flow Bent-Axis Truck Pumps 57-60 (B) Gold

Introduction 1-2 Piston Pumps (Open Circuit & Bent Axis)

(B) SDV 10/20 Medium Pressure Single Vane Pumps 77-80 (B) SDV2010 Medium Pressure Double Vane Pumps 81-84 (B) T7A Series High Performance Small Displacement Single Vane Pumps 85-86 (B) T6 Series Single, Double & Triple High Performance Vane Pumps 87-90 (B) T7 Series Single, Double & Triple High Performance Vane Pumps 91-93 (B) T67 High Performance Vane Pumps 94-96 (B) T6H/T7H Hybrid Technology Variable Piston Fixed Vane Pumps 97-100 (M) F11 Small Frame Fixed Displacement Bent-Axis Pumps/Motors 103-106 (M) F12 Large Frame Fixed Displacement Bent-Axis Pumps/Motors 107-110 (M) F1 Fixed Displacement Bent-Axis Truck Pumps/Motors 111-112 (M) V12 Small Frame Variable Displacement Bent-Axis Motors 113-116 (M) V14 Large Frame Variable Displacement Bent-Axis Motors 117-120 (M) T12 Dual Displacement Bent-Axis Motors 121-124 (B) M3/M4 High Performance Vane Motors 125-127 (B) M5 High Performance Vane Motors 128-130 (B) MR-MRE Low Speed High Torque Small Displacement Radial Piston Motors 131-134 (B) MRT-MRTE-MRTF Low Speed High Torque Large Displacement Radial Piston Motors 131,135-137 (B) MRD-MRDE, MRV-MRVE Low Speed High Torque Variable Displacement Radial Piston Motors 131,138-140 (B) Gold Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions 63-74 (I) (I) (I) (I)

Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions 63-74 Vane Pumps

Motors

Power Units

D-Pak 5 Gallon 143-144 H-Pak 10-40 Gallon, 09 - 63 GPM 145-152 V-Pak 10-40 Gallon, 2 - 156 GPM 145-152 V-Pak Low Profile 80 Gallon145-152

Reference

SAE Flanges and Shafts 155 Formulas and Conversions 156 Offer of Sale 157 (I) = Industrial (M) = Mobile (B) = both Industrial & Mobile

Parker Hydraulic Pump Division:


Continually Moving You Forward
For applications ranging from medium-pressure to the most demanding on earth, Parker HPD provides product and system solutions to the worlds mobile, industrial, mining and oil/gas markets. Our HPD centers are strategically located in Marysville, Ohio and Otsego, Michigan, where the industrys top teams design, engineer and manufacture HPDs lines as well as innovative solutions. Parker Hannifin, the worlds largest motion and control company, supports the divisions products with field sales, technical support, and distribution locations around the globe. With leadership commitment, Parker HPD continually responds to customer and market requirements for greater speed, improved performance, more precise control, less noise and more flexibility. Many such results are evident in the following descriptions of Parker HPDs most in-demand products and innovations. For the performance advantages your systems need now, and in the changing environment ahead, look to the name you trust. The one in constant motion for your success: Parkers Hydraulic Pump Division.

The Hydraulic Pump Division (HPD) of Parker Hannifin Corporation is todays technology leader in the application, engineering and manufacture of piston and vane design hydraulic pumps and motors. More than a superior-quality product supplier, Parker HPD is focused on performance that improves its customers productivity and profitability. As a result, youre assured of highly reliable, durable designs that exceed requirements, as well as our leading technical capabilities, 24/7 accessibility and responsiveness, dependable on-time delivery and exceptional system support.

The Powerful Advantages of Parker HPD


Technology Leadership for engineered solutions that exceed expectations Complete Product Lines Pumps open and closed circuit, axial piston, bent axis and vane Pressures medium, high, extreme Motors fixed and variable; wide speed capability Power Units Custom Systems Added-Value Capabilities New-Product Development Customized Solutions Industry-Leading Lead Times 24/7 Access and Response Applications Team Industry-Leading Technical Support

Piston Pumps
(M) = Mobile (I) = Industrial (B) = Mobile & Industrial (M) (I) (B) (M) (I) (B) (M) (B) (M) (M) (M) (M) (B) P1 Medium Pressure Mobile Piston Pumps PD Medium Pressure Industrial Piston Pumps P2 High Pressure/High Speed Piston Pumps P3 High Pressure/Super Charged Mobile Piston Pumps PVplus High Pressure Industrial Piston Pumps Premier Series High Pressure/Performance Piston Pumps VP1 Load Sensing Truck Pumps PAVC Medium Pressure/Super Charged Piston Pumps F11 Small Frame Fixed Displacement Bent-Axis Pumps/Motors F12 Large Frame Fixed Displacement Bent-Axis Pumps/Motors F1 Fixed Displacement Bent-Axis Truck Pumps/Motors F2 Twin Flow Bent-Axis Truck Pumps Gold Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions

Page

5-16 5-16 17-20 21-24 25-30 31-36 37-40 41-44 45-48 49-52 53-56 57-60 63-74

Piston Pumps (Mobile or Industrial)


P1/PD Medium Pressure Piston Pumps
Variable displacement, axial piston pump for open-circuit applications Medium pressure, continuous operation at pressures up to 4060 PSI (280 BAR) Compact, quiet and efficient control Wide temperature range suitable for mobile applications

P1 PD

P1 Mobile Pump Performance Data


Model Series P1018 P1028 P1045 P1060 P1075 P1100 P1140 Displacement in3/rev (cc/rev) 110 (18) 171 (28) 275 (45) 366 (60) 458 (75) 610 (100) 854 (140) Max. Outlet Pressure PSI (BAR) 4000 (280) 4000 (280) 4000 (280) 4000 (280) 4000 (280) 4000 (280) 4000 (280) Rated Drive Speed RPM 3200 3200 2600 2500 2300 2100 2000 Flow GPM (LPM) 15 (568) 24 (908) 31 (1173) 37 (1401) 42 (1590) 54 (2044) 71 (2688) Input Horsepower HP (KW) 44 (328) 70 (522) 90 (671) 117 (872) 127 (947) 155 (1156) 206 (1536)

Markets
Forestry Oil & Gas Construction Mining Power Gen Recycling Military Utility

Applications
Feller Bunchers, Knuckle Boom Loader, Skidder, Forwarder, Cranes Nitrogen Pumpers, Cementers, Coil Tubing ADTs, Fan Drives Drill Rigs, Top Drives, Loaders, Dump Trucks, Tunneling Equipment Lube Oil Skids Shredders, Balers, Compactors, Vacuum Truck Systems, Refuse Trucks - ASL, Rear Loaders Fan Drives Cranes, Digger Derricks, Man Lifts, Cable Placers, Fan Drives, Horizontal Directional Drills

PD Industrial Pump Performance Data


Model Series PD018 PD028 PD045 PD060 PD075 PD100 PD140 Displacement in3/rev (cc/rev) 110 (18) 171 (28) 275 (45) 366 (60) 458 (75) 610 (100) 854 (140) Max. Outlet Pressure PSI (BAR) 4000 (280) 4000 (280) 4000 (280) 4000 (280) 4000 (280) 4000 (280) 4000 (280) Rated Drive Speed RPM 1800 1800 1800 1800 1800 1800 1800 Flow GPM (LPM) 8 (303) 13 (492) 21 (795) 27 (1022) 34 (1287) 46 (1741) 63 (2385) Input Horsepower HP (KW) 23 (172) 33 (246) 53 (395) 79 (589) 100 (746) 133 (992) 185 (1380)

Markets
Industrial Oil & Gas Power Gen Material Handling Power Units, Industrial Molding, Press Oil Lift Pumps Turbine Start Conveyor Drives

Applications

Piston Pumps
P1/PD Medium Pressure Mobile Piston Pumps

(Mobile or Industrial)

P1/PD Benefits/Features
Compact overall package size Quiet operation Low flow ripple to further reduce noise Elastomer seals that eliminate gaskets and external leakage High operating efficiency for lower power consumption and reduced heat generation Simple hydraulic controls with no-leak adjustments SAE and ISO standard mounting flanges and ports Long life, tapered-roller shaft bearings Long life, low friction, hydrostatically balanced cam bearings Full power through-drive capability End or side inlet and outlet ports Case drain ports for horizontal or vertical, shaft-up mounting Optional minimum and maximum displacement adjustments Optional case-to-inlet check valve to extend shaft seal life Easy to service

Piston Pumps (Mobile)


P1 Medium Pressure Mobile Piston Pumps
Performance Characteristics
P1 Series Shaft Input Power - 2000 RPM
140 (188)

P1 Series Shaft Input Power - 1800 RPM


140 (188)

50C Inlet Oil Temp - ISO VG 32 Fluid - Max Displacement

50C Inlet Oil Temp - ISO VG 32 Fluid - Max Displacement

Shaft Input Power - kw (HP)

Shaft Input Power - kw (HP)

120 (161) 100 (134) 80 (107) 60 (80) 40 (54) 20 (27) 0

120 (161) 100 (134) 80 (107) 60 (80) 40 (54) 20 (27) 0

50 (725)

Pump Outlet Pressure - bar (PSI)


P1 100 P1 075 P1 060

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

50 (725)

Pump Outlet Pressure - bar (PSI)


P1 028 P1 018

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

P1 140

P1 045

P1 Series Pump Outlet Flow - 2000 RPM


300 (79.3) 280 (73.9) 260 (68.7) 240 (63.4) 220 (58.1) 200 (52.8) 180 (47.6) 160 (42.3) 140 (39.9) 120 (31.7) 100 (26.3)

P1 Series Pump Outlet Flow - 1800 RPM


110 (29.1) 100 (26.4) 90 (23.8) 80 (21.1) 70 (18.5) 60 (15.9) 50 (13.2) 40 (10.6) 30 (7.9) 20 (5.3) 10 (2.6)

50C Inlet Oil Temperature - ISO VG 32 Fluid - Maximum Displacement

50C Inlet Oil Temperature - ISO VG 32 Fluid - Maximum Displacement

Pump Outlet Flow - lpm (GPM)

Pump Outlet Flow - lpm (GPM)

50 (725)

Pump Outlet Pressure - bar (PSI)


P1 100 P1 075 P1 060

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

50 (725)

Pump Outlet Pressure - bar (PSI)


P1 028 P1 018

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

P1 140

P1 045

P1 Series Overall Efficiency - 2000 rpm


95 90

P1 Series Overall Efficiency - 2100 rpm


95 90

50C Inlet Oil Temperature - ISO 32 Fluid - Maximum Displacement

50C Inlet Oil Temperature - ISO 32 Fluid - Maximum Displacement

Overall Efficiency - %

Overall Efficiency - %

85 80 75 70 65 60 55

85 80 75 70 65 60 55

50 (725)

Pump Outlet Pressure - bar (PSI)


P1 100 P1 075 P1 060

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

50 (725)

Pump Outlet Pressure - bar (PSI)


P1 028 P1 018

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

P1 140

P1 045

Piston Pumps (Industrial)


PD Medium Pressure Industrial Piston Pumps
Performance Characteristics
*PD Series Shaft Input Power - 1800 rpm
140 (188)

*PD Series Shaft Input Power - 1800 rpm


140 (188)

50C Inlet Oil Temp - ISO VG 32 Fluid - Max Displacement

50C Inlet Oil Temp - ISO VG 32 Fluid - Max Displacement

Shaft Input Power - kw (HP)

100 (134) 80 (107) 60 (80) 40 (54) 20 (27) 0

Shaft Input Power - kw (HP)


0 50 (725) 100 (1450) 150 (2176) 200 (2901) 250 (3626) 300 (4351)

120 (161)

120 (161) 100 (134) 80 (107) 60 (80) 40 (54) 20 (27) 0

Pump Outlet Pressure - bar (PSI)


PD 028 PD 018

50 (725)

Pump Outlet Pressure - bar (PSI)


PD 100 PD 075 PD 060

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

PD 045

PD 140

*PD Series Pump Outlet Flow - 1800 rpm


110 (29.1) 100 (26.4) 90 (23.8) 80 (21.1) 70 (18.5) 60 (15.9) 50 (13.2) 40 (10.6) 30 (7.9) 20 (5.3) 10 (2.6)

*PD Series Pump Outlet Flow - 1800 rpm


300 (79.3) 280 (73.9) 260 (68.7) 240 (63.4) 220 (58.1) 200 (52.8) 180 (47.6) 160 (42.3) 140 (39.9) 120 (31.7) 100 (26.3)

50C Inlet Oil Temperature - ISO VG 32 Fluid - Maximum Displacement

50C Inlet Oil Temperature - ISO VG 32 Fluid - Maximum Displacement

Pump Outlet Flow - lpm (GPM)

50 (725)

Pump Outlet Pressure - bar (PSI)


PD 028 PD 018

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

Pump Outlet Flow - lpm (GPM)

50 (725)

Pump Outlet Pressure - bar (PSI)


PD 100 PD 075 PD 060

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

PD 045

PD 140

*PD Series Overall Efficiency - 1800 rpm


95 90

*PD Series Overall Efficiency - 1800 rpm


95 90

50C Inlet Oil Temperature - ISO 32 Fluid - Maximum Displacement

50C Inlet Oil Temperature - ISO 32 Fluid - Maximum Displacement

Overall Efficiency - %

85 80 75 70 65 60 55

Overall Efficiency - %
0 50 (725) 100 (1450) 150 (2176) 200 (2901) 250 (3626) 300 (4351)

85 80 75 70 65 60 55

Pump Outlet Pressure - bar (PSI)


PD 028 PD 018

50 (725)

Pump Outlet Pressure - bar (PSI)


PD 100 PD 075 PD 060

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

PD 045

PD 140

* For additional speeds, see enclosed CD

Piston Pumps (Mobile & Industrial)


P1/PD Medium Pressure Mobile Piston Pumps

G F B D

E C A

Dimensions, inch (mm)


Series P1/PD018 P1/PD028 P1/PD045 P1/PD060 P1/PD075 P1/PD100 P1/PD140 A 646 (1642) 925 (2355) 900 (2287) (996 (2530) 1037 (2635) 1337 (3396) 1434 (3643) B 024 (62) 037 (95) 037 (95) 050 (127) 050 (127) 050 (127) 050 (127) C Max. 129 (328) 184 (468) 184 (468) 224 (568) 224 (568) 247 (628) 297 (755) D 472 (120) 472 (120) 472 (120) 472 (120) 472 (120) 472 (120) 472 (120) E 297 (755) 321 (815) 363 (923) 398 (1012) 409 (1038) 461 (1171) 524 (133) F 260 (66) 293 (745) 292 (742) 323 (82) 354 (90) 398 (101) 445 (113) G 424 (1077) 448 (1138) 475 (1207) 488 (1239) 503 (1277) 566 (1437) 613 (1557) H Max. 480 (122) 480 (122) 480 (122) 480 (122) 480 (122) 480 (122) 480 (122)

SAE Flanges & Shafts


PD018 Mounting flange, SAE Pilot diameter, in (mm) Keyed shaft, SAE Spline shaft, SAE 82-2 (A) 32 (825) 19-1 (A) 11T-16/32P PD028, PD045 101-2 (B) 40 (1016) 25-1 (B-B) 15T-16/32P (B-B) PD060, PD075 127-4 (C) 50 (127) 32-1 (C) 14T12/24P (C) PD100 127-4 (C) 50 (127) 38-1 (C-C) 17T-12/24P (C-C) PD140 152-4 (D) 60 (1524) 44-1 (D) 13T-8/16P (D)

P1/PD 18cc, Model Ordering Code


018 P
Pump Series Open Circuit Displacement 18cc/rev. (1.10 in/rev) Mounting & Ports

Piston Pumps
2 0
No Thru-Drive

S
Shaft Single Options Shaft Seal Shaft Rotation

A
Adjustable Displacement Stops

00
Special Features

Fluorocarbon Additional Seal Material Control Design Control Options Configuration Letter Options

Port Orientation

Threaded Ports

Paint

Pump Series
P1 PD Mobile Industrial M S

Configuration
Mobile (P1) Industrial (PD)

Additional Control Options


0 2 No other options Displacement sensor ** ** mandatory with "W**", "X**", "Y**", "Z**" "*D*" and "*Y*"

Mounting & Ports


S A M B SAE A Pilot SAE Threaded Work Ports with SAE Aux Ports SAE A Pilot Metric Work Ports with BSPP Aux Ports ISO - 80mm Pilot Metric Work Ports with Metric Aux Ports ISO - 80mm Pilot Metric Work Ports BSPP with Aux Ports

Control Options
C0 C1 L0 Pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pressure limiter 290.08 - 1160.30 PSI (20 - 80 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with bleed & pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pilot operated pressure limiter with ISO4401 interface & SAE 4 Vent Port Pilot operated pressure limiter with mechanical adjustment and SAE 4 Vent Port Pilot operated pressure limiter with mechanical and electrical adjustment 12 VDC Pilot operated pressure limiter with mechanical and electrical adjustment 24 VDC See chart below for electronic control options

Port Orientation
E R End Ports Side ported with ripple chamber

Adjustable Displacement Stops


0 1 2 3 None Adjustable maximum displacement stop Adjustable minimum displacement stop Adjustable maximum and minimum displacement stop

L2

Shaft Options
01 02 04 06 Splined shaft - SAE 19-4 11T Keyed shaft - SAE 19-1 .75 Dia. ISO keyed 20MM Dia. Splined shaft - SAE A 9T

AN* AM AE AF ##

Paint
00 PB No Paint Black Paint

Shaft Rotation
R L Clockwise Counterclockwise

*Not functional control as such

Electronic Control Options


# # 0 D Y P T S U W X Y Z Electronic valve with zero displacement default Electronic valve with max displacement default Electronic valve with zero displacement default and hydromechanical Pmax Electronic valve with max displacement default and hydromechanical Pmax Electronic valve with zero displacement default (CANBUS compatible) Electronic valve with max displacement default (CANBUS compatible) Electronic valve with zero displacement default and hydromechanical Pmax (CANBUS compatible) Electronic valve with max displacement default and hydromechanical Pmax (CANBUS compatible) No ECU Proportional displacement control Proportional pressure control

*** W, X, Y and Z only available with *D* and *Y*

10

Piston Pumps
028 P
Pump Series Open Circuit Displacement 28cc/rev. (1.71 in/rev) Mounting & Ports

P1/PD 28cc, Model Ordering Code


S
Shaft Single Options Shaft Seal Shaft Rotation

A
Adjustable Displacement Stops Port Type Thru-Drive Mounting Pad/Coupling Paint

00
Special Features

Fluorocarbon Additional Seal Material Control Design Control Options Configuration Letter Options

Port Orientation

Pump Series
P1 PD Mobile Industrial

Control Options
C0 C1 L0 Pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pressure limiter 290.08 - 1160.30 PSI (20 - 80 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with bleed & pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pilot operated pressure limiter with ISO4401 interface & SAE 4 Vent Port Pilot operated pressure limiter with mechanical adjustment and SAE 4 Vent Port Pilot operated pressure limiter with mechanical and electrical adjustment 12 VDC Pilot operated pressure limiter with mechanical and electrical adjustment 24 VDC See chart below for electronic control options
E R T

Port Orientation
End Ports Side ported with ripple chamber Side ported with through drive

Mounting & Ports


S A M B SAE B Pilot SAE Work Ports with SAE Aux Ports SAE B Pilot Metric Work Ports with BSPP Aux Ports ISO - 100MM Pilot Metric Work Ports with Aux Ports ISO - 100MM Pilot Metric Work Ports with BSPP Aux Ports

Adjustable Displacement Stops* (For E & R Port Orientation Only)


0 1 2 3 None Adjustable maximum displacement stop Adjustable minimum displacement stop Adjustable maximum and minimum displacement stop

L2 AN* AM AE AF ##

*Not available with Thru-Drive

Shaft Options
01 02 04 08 Splined shaft - SAE B-B 15T Keyed shaft - SAE B-B 1 Dia. ISO keyed 25MM Dia. Splined shaft - SAE B 13T

Port Type
0 2 Flange Ports Threaded Ports

*Not functional control as such

Thru-Drive Mounting Pad/Coupling


0 A H B Q No Thru-Drive SAE 82-2 (A), 16 (A) . 9T coupling SAE 82-2 (A), 19 (--), 11T coupling SAE 101-2 (B), 22 (B) , 13T coupling SAE 101-2 (B), 25 (B-B) coupling

Shaft Rotation
R L Clockwise Counterclockwise

Additional Control Options


0 2 No other options Displacement sensor ** ** mandatory with "W**", "X**", "Y**", "Z**" "*D*" and "*Y*"

Configuration
M S Mobile (P1) Industrial (PD)

Paint
00 PB No Paint Black Paint

Electronic Control Options


# # 0 D Y P T S U W X Y Z Electronic valve with zero displacement default Electronic valve with max displacement default Electronic valve with zero displacement default and hydromechanical Pmax Electronic valve with max displacement default and hydromechanical Pmax Electronic valve with zero displacement default (CANBUS compatible) Electronic valve with max displacement default (CANBUS compatible) Electronic valve with zero displacement default and hydromechanical Pmax (CANBUS compatible) Electronic valve with max displacement default and hydromechanical Pmax (CANBUS compatible) No ECU Proportional displacement control Proportional pressure control

*** W, X, Y and Z only available with *D* and *Y*

11

P1/PD 45cc, Model Ordering Code


045 P
Pump Series Open Circuit Displacement 45cc/rev. (2.75 in/rev) Mounting & Ports

Piston Pumps
00

S
Shaft Single Options Shaft Seal Shaft Rotation

A
Adjustable Displacement Stops Port Type Thru-Drive Mounting Pad & Coupling Paint

Fluorocarbon Additional Seal Material Control Design Control Options Configuration Letter Options

Special Features

Port Orientation

Pump Series
P1 PD Mobile Industrial

Control Options
C0 C1 L0 Pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pressure limiter 290.08 - 1160.30 PSI (20 - 80 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with bleed & pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pilot operated pressure limiter with ISO4401 interface & SAE 4 Vent Port Pilot operated pressure limiter with Load sensing (only available with "T" Torque Limiter option, i.e. "ALT ") Pilot operated pressure limiter with mechanical adjustment and SAE 4 Vent Port Pilot operated pressure limiter with mechanical and electrical adjustment 12 VDC Pilot operated pressure limiter with mechanical and electrical adjustment 24 VDC See chart below for electronic control options
E R T

Port Orientation
End Ports Side ported with ripple chamber Side ported with through drive, P*045 Only

Mounting & Ports


S SAE B Pilot with SAE Threaded or Flange Work Ports with SAE Aux Ports SAE B Pilot with Metric Threaded or Metric Flange Work Ports with BSPP Aux Ports ISO - 100MM Pilot Metric Threaded or Metric Flange Work Ports with Aux Ports ISO - 100MM Pilot Metric Threaded or Metric Flange Work Ports with Aux Ports

Adjustable Displacement Stops* (For E & R Port Orientation Only)


0 1 2 3 None Adjustable maximum displacement stop Adjustable minimum displacement stop Adjustable maximum and minimum displacement stop

L2 AN* AL AM AE AF ##

*Not available with Thru-Drive

Port Type
0 2 Flange Ports Threaded Ports

Shaft Options
01 02 04 08 Splined shaft - SAE B-B 15T Keyed shaft - SAE B-B 1 Dia. ISO keyed 25MM Dia. Splined shaft - SAE B 13T

Thru-Drive Mounting Pad/Coupling


0 A H B Q No Thru-Drive SAE 82-2 (A), 16 (A) coupling SAE 82-2 (A), 19 (--) coupling SAE 101-2 (B), 22 (B) coupling SAE 101-2 (B), 25 (B-B) coupling

*Not functional control as such

Shaft Rotation
R L Clockwise Counterclockwise

Additional Control Options


0 2 T No other options Displacement sensor ** Torque Limiter Control (Used with AM control option)

Configuration
M S U Mobile (P1) Industrial (PD) Universal (SAE Mounting Option, S, Only)

Paint
00 PB No Paint Black Paint

** mandatory with "W**", "X**", "Y**", "Z**" "*D*" and "*Y*"

Electronic Control Options


# # 0 D Y P T S U W X Y Z Electronic valve with zero displacement default Electronic valve with max displacement default Electronic valve with zero displacement default and hydromechanical Pmax Electronic valve with max displacement default and hydromechanical Pmax Electronic valve with zero displacement default (CANBUS compatible) Electronic valve with max displacement default (CANBUS compatible) Electronic valve with zero displacement default and hydromechanical Pmax (CANBUS compatible) Electronic valve with max displacement default and hydromechanical Pmax (CANBUS compatible) No ECU Proportional displacement control Proportional pressure control

*** W, X, Y and Z only available with *D* and *Y*

12

Piston Pumps
060
Pump Series Open Circuit Displacement 60cc/rev. (3.66 in/rev) Mounting & Ports

P1/PD 60cc, Model Ordering Code


S
Shaft Single Options Shaft Seal Shaft Rotation

A
Adjustable Displacement Stops Port Type Thru-Drive Mounting Pad & Coupling Paint

00
Special Features

Fluorocarbon Additional Seal Material Control Design Control Options Configuration Letter Options

Port Orientation

Pump Series
P1 PD Mobile Industrial

Control Options
C0 C1 L0 Pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pressure limiter 290.08 - 1160.30 PSI (20 - 80 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with bleed & pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pilot operated pressure limiter with ISO4401 interface & SAE 4 Vent Port Pilot operated pressure limiter with Load sensing ( only available with "T" Torque Limiter option, i.e. "ALT ") Pilot operated pressure limiter with mechanical adjustment and SAE 4 Vent Port Pilot operated pressure limiter with mechanical and electrical adjustment 12 VDC Pilot operated pressure limiter with mechanical and electrical adjustment 24 VDC See chart below for electronic control options
E S T

Port Orientation
End Ports Side Ports Side Ports with Thru-Drive

Open Circuit
P X Open Circuit (One Side of Center) Open Circuit (100% over Center)

Adjustable Displacement Stops* (For E & S Port Orientation Only)


0 1 2 3 None Adjustable maximum displacement stop Adjustable minimum displacement stop Adjustable maximum and minimum displacement stop

Mounting & Ports


S A M B C D SAE C Pilot SAE Flange Connection Ports with SAE Aux Ports SAE C Pilot Metric Flange Connection Ports with BSPP Aux Ports ISO - 125MM Pilot Metric Flange Connection Ports with Metric Aux Ports ISO - 125MM Pilot, Metric Flange Connection Ports with BSPP Aux Ports SAE C 2-Bolt Pilot SAE Flange Connection Ports with SAE Aux Ports SAE C 2-Bolt Pilot SAE Flange Connection Ports with BSPP Aux Ports

L2 AN* AL AM AE AF ##

*Not available with Thru-Drive

Port Type
0 2 4 Flange Ports SAE Threaded Ports (Available only on "E" port) BSPP Threaded Ports (Available only on "E" port)

Shaft Options
01 02 04 Splined shaft - SAE C 14T Keyed shaft - SAE C 32-1 KEY Keyed shaft - ISO / DIN KEY 32MM Dia.

*Not functional control as such

Thru-Drive Mounting Pad/Coupling


0 A H B Q J K C No Thru-Drive SAE 82-2 (A), 16 (A) coupling SAE 82-2 (A), 19 (--) coupling SAE 101-2 (B), 22 (B) coupling SAE 101-2 (B), 25 (B-B) coupling SAE 101-2 (B), rotated 45 degrees, 22 (B) coupling SAE 101-2 (B), rotated 45 degrees, 25 (B-B) coupling SAE 127-4 (C), 32 (C) coupling

Additional Control Options


0 2 T No other options Displacement sensor ** Torque Limiter Control (Used with AM control option)

Shaft Rotation
R L Clockwise Counterclockwise

** mandatory with "W**", "X**", "Y**", "Z**" "*D*" and "*Y*"

Configuration
M S U Mobile (P1) Industrial (PD) Universal

Paint
00 No Paint Black Paint

Electronic Control Options


# # 0 D Y P T S U W X Y Z Electronic valve with zero displacement default Electronic valve with max displacement default Electronic valve with zero displacement default and hydromechanical Pmax Electronic valve with max displacement default and hydromechanical Pmax Electronic valve with zero displacement default (CANBUS compatible) Electronic valve with max displacement default (CANBUS compatible) No ECU

PB

Proportional displacement control Proportional pressure control

Electronic valve with zero displacement default and hydromechanical Pmax (CANBUS compatible) Electronic valve with max displacement default and hydromechanical Pmax (CANBUS compatible)

*** W, X, Y and Z only available with *D* and *Y*

13

P1/PD 75cc, Model Ordering Code


075
Pump Series Open Circuit Displacement 75cc/rev. (4.58 in/rev) Mounting & Ports

Piston Pumps
0 00
Thru-Drive Mounting Pad & Coupling Paint

S
Shaft Single Options Shaft Seal Shaft Rotation

A
Adjustable Displacement Stops

Fluorocarbon Additional Seal Material Control Design Control Options Configuration Letter Options

Special Features

Port Orientation

Flange Ports

Pump Series
P1 PD Mobile Industrial M S U

Configuration
Mobile (P1) Industrial (PD) Universal E S T

Port Orientation
End Ports Side Ports Side Ports with Thru-Drive

Open Circuit
P X Open Circuit (One Side of Center) Open Circuit (100% over Center)

Control Options
C0 C1 L0 Pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pressure limiter 290.08 - 1160.30 PSI (20 - 80 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with bleed & pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pilot operated pressure limiter with ISO4401 interface & SAE 4 Vent Port Pilot operated pressure limiter with mechanical adjustment and SAE 4 Vent Port Pilot operated pressure limiter with mechanical and electrical adjustment 12 VDC Pilot operated pressure limiter with mechanical and electrical adjustment 24 VDC See chart below for electronic control options

Adjustable Displacement Stops* (For E & S Port Orientation Only)


0 1 2 3 None Adjustable maximum displacement stop Adjustable minimum displacement stop Adjustable maximum and minimum displacement stop

Mounting & Ports


S A M B C D SAE C Pilot SAE Flange Connection Ports with SAE Aux Ports SAE C Pilot Metric Flange Connection Ports with BSPP Aux Ports ISO - 125MM Pilot Metric Flange Connection Ports with Metric Aux Ports ISO - 125MM Pilot, Metric Flange Connection Ports with BSPP Aux Ports SAE C 2-Bolt Pilot SAE Flange Connection Ports with SAE Aux Ports SAE C 2-Bolt Pilot SAE Flange Connection Ports with BSPP Aux Ports

*Not available with Thru-Drive

L2 AN* AM AE AF ##

Thru-Drive Mounting Pad/Coupling


0 A H B Q J K C No Thru-Drive SAE 82-2 (A), 16 (A) coupling SAE 82-2 (A), 19 (--) coupling SAE 101-2 (B), 22 (B) coupling SAE 101-2 (B), 25 (B-B) coupling SAE 101-2 (B), rotated 45 degrees, 22 (B) coupling SAE 101-2 (B), rotated 45 degrees, 25 (B-B) coupling SAE 127-4 (C), 32 (C) coupling

Shaft Options
01 02 04 Splined shaft - SAE C 14T Keyed shaft - SAE C 32-1 KEY Keyed shaft - ISO / DIN KEY 32MM Dia.

*Not functional control as such

Shaft Rotation
R L Clockwise Counterclockwise

Additional Control Options


0 2 T No other options Displacement sensor ** Torque Limiter Control (Used with AM control option)
00 PB No Paint Black Paint

Paint

** mandatory with "W**", "X**", "Y**", "Z**" "*D*" and "*Y*"

Electronic Control Options


# # 0 D Y P T S U W X Y Z Electronic valve with zero displacement default Electronic valve with max displacement default Electronic valve with zero displacement default and hydromechanical Pmax Electronic valve with max displacement default and hydromechanical Pmax Electronic valve with zero displacement default (CANBUS compatible) Electronic valve with max displacement default (CANBUS compatible) Electronic valve with zero displacement default and hydromechanical Pmax (CANBUS compatible) Electronic valve with max displacement default and hydromechanical Pmax (CANBUS compatible) No ECU Proportional displacement control Proportional pressure control

*** W, X, Y and Z only available with *D* and *Y*

14

Piston Pumps
100
Pump Series Open Circuit Displacement 100cc/rev. (6.1 in/rev) Mounting & Ports

P1/PD 100cc, Model Ordering Code


S
Shaft Single Options Shaft Seal Shaft Rotation

A
Adjustable Displacement Stops

0
Thru-Drive Mounting Pad & Coupling Paint

00
Special Features

Fluorocarbon Additional Seal Material Control Design Control Options Configuration Letter Options

Port Orientation

Flange Ports

Pump Series
P1 PD Mobile Industrial M S U

Configuration
Mobile (P1) Industrial (PD) Universal E S T

Port Orientation
End Ports Side Ports Side Ports with Thru-Drive

Open Circuit
P X Open Circuit (One Side of Center) Open Circuit (100% over Center)

Control Options
C0 C1 L0 Pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pressure limiter 290.08 - 1160.30 PSI (20 - 80 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with bleed & pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pilot operated pressure limiter with ISO4401 interface & SAE 4 Vent Port Pilot operated pressure limiter with mechanical adjustment and SAE 4 Vent Port Pilot operated pressure limiter with mechanical and electrical adjustment 12 VDC Pilot operated pressure limiter with mechanical and electrical adjustment 24 VDC See chart below for electronic control options

Adjustable Displacement Stops* (For E & S Port Orientation Only)


0 1 2 3 None Adjustable maximum displacement stop Adjustable minimum displacement stop Adjustable maximum and minimum displacement stop

Mounting & Ports


S A M B SAE C Pilot SAE Flange Connection Ports with SAE Aux Ports SAE C Pilot Metric Flange Connection Ports with BSPP Aux Ports ISO - 125MM Pilot Metric Flange Connection Ports with Metric Aux Ports ISO - 125MM Pilot, Metric Flange Connection Ports with BSPP Aux Ports

*Not available with Thru-Drive

L2 AN* AM AE AF ##

Thru-Drive Mounting Pad/Coupling


0 A H B Q J K C N No Thru-Drive SAE 82-2 (A), 16 (A) coupling SAE 82-2 (A), 19 (--) coupling SAE 101-2 (B), 22 (B) coupling SAE 101-2 (B), 25 (B-B) coupling SAE 101-2 (B), rotated 45 degrees, 22 (B) coupling SAE 101-2 (B), rotated 45 degrees, 25 (B-B) coupling SAE 127-4 (C), 32 (C) coupling SAE 127-4 (C), 38 (C-C) coupling

Shaft Options
01 02 04 06 Splined shaft - SAE C-C 17T Keyed shaft - SAE C-C 38-1 Keyed shaft - ISO / DIN 40MM Dia. Splined shaft - SAE C 14T

Shaft Rotation
R L Clockwise Counterclockwise

*Not functional control as such

Additional Control Options


0 2 T No other options Displacement sensor ** Torque Limiter Control (Used with AM control option)

Paint
00 PB No Paint Black Paint

** mandatory with "W**", "X**", "Y**", "Z**" "*D*" and "*Y*"

Electronic Control Options


# # 0 D Y P T S U W X Y Z Electronic valve with zero displacement default Electronic valve with max displacement default Electronic valve with zero displacement default and hydromechanical Pmax Electronic valve with max displacement default and hydromechanical Pmax Electronic valve with zero displacement default (CANBUS compatible) Electronic valve with max displacement default (CANBUS compatible) Electronic valve with zero displacement default and hydromechanical Pmax (CANBUS compatible) Electronic valve with max displacement default and hydromechanical Pmax (CANBUS compatible) No ECU Proportional displacement control Proportional pressure control

*** W, X, Y and Z only available with *D* and *Y*

15

P1/PD 140cc, Model Ordering Code


140
Pump Series Open Circuit Displacement 140cc/rev. (8.54 in/rev) Mounting & Ports

Piston Pumps
0 00
Thru-Drive Mounting Pad & Coupling Paint

S
Shaft Single Options Shaft Seal Shaft Rotation

A
Adjustable Displacement Stops

Fluorocarbon Additional Seal Material Control Design Control Options Configuration Letter Options

Special Features

Port Orientation

Flange Ports

Pump Series
P1 PD Mobile Industrial M S U

Configuration
Mobile (P1) Industrial (PD) Universal E S T

Port Orientation
End Ports Side Ports Side Ports with Thru-Drive

Open Circuit
P X Open Circuit (One Side of Center) Open Circuit (100% over Center)

Control Options
C0 C1 L0 Pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pressure limiter 290.08 - 1160.30 PSI (20 - 80 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Load sensing 145.04-435.11 PSI P (10-30 bar P) with bleed & pressure limiter 1160.30 - 4061.05 PSI (80 - 280 bar) Pilot operated pressure limiter with ISO4401 interface & SAE 4 Vent Port Pilot operated pressure limiter with mechanical adjustment and SAE 4 Vent Port Pilot operated pressure limiter with mechanical and electrical adjustment 12 VDC Pilot operated pressure limiter with mechanical and electrical adjustment 24 VDC See chart below for electronic control options

Adjustable Displacement Stops* (For E & S Port Orientation Only)


0 1 2 3 None Adjustable maximum displacement stop Adjustable minimum displacement stop Adjustable maximum and minimum displacement stop

Mounting & Ports


S A M B SAE D Pilot SAE Flange Connection Ports with SAE Aux Ports SAE D Pilot BSPP Flange Connection Ports with BSPP Aux Ports ISO - 180MM Pilot Metric Flange Connection Ports with Metric Aux Ports ISO - 180MM Pilot Metric Flange Connection Ports with BSPP Aux Ports

*Not available with Thru-Drive

L2 AN* AM AE AF ##

Thru-Drive Mounting Pad/Coupling


0 A B Q J K C N D No Thru-Drive SAE 82-2 (A), 16 (A) coupling SAE 101-2 (B), 22 (B) coupling SAE 101-2 (B), 25 (B-B) coupling SAE 101-2 (B), rotated 45 degrees, 22 (B) coupling SAE 101-2 (B), rotated 45 degrees, 25 (B-B) coupling SAE 127-4 (C), 32 (C) coupling SAE 127-4 (C), 38 (C-C) coupling SAE 152-4 (D), 44 (D) coupling

Shaft Options
01 02 04 06 Splined shaft - SAE D 13T Keyed shaft - SAE D 44-1 Keyed shaft - ISO / DIN 50MM Dia. Splined shaft - SAE

Shaft Rotation
R L Clockwise Counterclockwise

*Not functional control as such

Additional Control Options


0 2 T No other options Displacement sensor ** Torque Limiter Control (Used with AM control option)

Paint
00 PB No Paint Black Paint

** mandatory with "W**", "X**", "Y**", "Z**" "*D*" and "*Y*"

Electronic Control Options


# # 0 D Y P T S U W X Y Z Electronic valve with zero displacement default Electronic valve with max displacement default Electronic valve with zero displacement default and hydromechanical Pmax Electronic valve with max displacement default and hydromechanical Pmax Electronic valve with zero displacement default (CANBUS compatible) Electronic valve with max displacement default (CANBUS compatible) Electronic valve with zero displacement default and hydromechanical Pmax (CANBUS compatible) Electronic valve with max displacement default and hydromechanical Pmax (CANBUS compatible) No ECU Proportional displacement control Proportional pressure control

*** W, X, Y and Z only available with *D* and *Y*

16

Piston Pumps (Mobile & Industrial)


P2 High Pressure/High Speed Mobile Piston Pumps

The variable displacement piston pumps from Parker Hannifin, designated P2 are intended , for mobile and industrial applications, featuring a very compact design, low noise level and low pressure ripple.

Stable and quick to respond to system demands in many different types of mobile machinery, the P2 is designed for cost effective installation within the limited space available on modern mobile machines.

Pump Performance Data


Model Series P2060 P2075 P2105 P2145 Displacement in3/rev (cc/rev) 366 (60) 458 (75) 641 (105) 885 (145) Max. Outlet Pressure PSI (BAR) 4600 (320) 4600 (320) 4600 (320) 4600 (320) Rated Drive Speed RPM 2800 2500 2300 2200 Flow GPM (LPM) 42 (159) 48 (182) 61 (231) 78 (295) Input Horsepower HP (KW) 96 (72) 145 (108) 185 (138) 240 (179)

Markets
Forestry Construction Mining Material Handling Recycling Drill Rigs, Loaders

Applications
Feller Bunchers, Knuckle Boom Loader, Skidder, Forwarder Wheel Loader, Dozers, Off-Highway Trucks, Truck Mounted Cranes, Lift Trucks, Reachstacker Shredders, Balers, Compactors

17

Piston Pumps (Mobile & Industrial)


P2 High Pressure/High Speed Mobile Piston Pumps
Performance Characteristics
160 (215)

P2 Series Input Drive Power - 2000 RPM


40C Inlet Oil Temp - ISO VG 32 Fluid - Max Displacement

Shaft Input Power - kw (HP)

140 (188) 120 (161) 100 (134) 80 (107) 60 (80) 40 (54) 20 (27) 0 0 50 (725) 100 (1450) 150 (2176) 200 (2901) 250 (3626) 300 (4351) 350 (5075)

Pump Outlet Pressure - bar (PSI)


P2 105 P2 075 P2 060

P2 145

P2 Series Pump Outlet Flow - 2000 RPM


300 (79.3)

40C Inlet Oil Temperature - ISO VG 32 Fluid - Maximum Displacement

Pump Outlet Flow - lpm (GPM)

Benefits/Features
Compact Low noise level Sealed shaft bearing Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed

250 (66.0) 200 (52.8) 150 (39.6) 100 (26.4) 50 (13.2) 0

50 (725)

Pump Outlet Pressure - bar (PSI)


P2 105 P2 075 P2 060

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

350 (5075)

P2 145

P2 Series Overall Efficiency - 2000 RPM


100

40C Inlet Oil Temperature - ISO 32 Fluid - Maximum Displacement

Overall Efficiency - %

90

80

70

60

50

50 (725)

Pump Outlet Pressure - bar (PSI)


P2 105 P2 075 P2 060

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

P2 145

18

Piston Pumps (Mobile & Industrial)


P2 High Pressure/High Speed Piston Pumps

G B D E A C

Dimensions, inch (mm)


Series P2060 P2075 P2105 P2145 A Max* 118 (299) 129 (3275) 141 (358) 147 (375) B Max. 049 (125) 049 (125) 049 (125) 050 (127) C Max. 219 (556) 244 (620) 298 (757) 298 (757) D 362 (92) 441 (112) 441 (112) 465 (118) E Max. 674 (1713) 763 (1938) 835 (2120) 886 (2250) F 555 (141) 571 (145) 689 (175) 713 (181) G 449 (114) 484 (123) 646 (164)

* With thru-shaft option

Thru-Drive Kits for P2 Series (Nitrile Seals, UNC Threads, Couplings)


Thru-Drive Mounting SAE A with 9 tooth spline SAE B with 13 tooth spline SAE B with 15 tooth spline SAE C with 14 tooth spline SAE D with 13 tooth spline P2060 Kit # P2-060-0215-01N P2-060-0216-01N P2-060-0217-01N P2-060-0218-01N Not Available P2075 Kit # P2-075-0215-01N P2-075-0216-01N P2-075-0217-01N P2-075-0218-01N Not Available P2105 Kit # P2-105-0215-01N P2-105-0216-01N P2-105-0217-01N P2-105-0218-01N Not Available P2145 Kit # P2-145-0215-01N P2-145-0216-01N P2-145-0217-01N P2-145-0218-01N P2-145-0220-01N

19

P2 Model Ordering Code


P2
Pump Series Displacement Rotation Shaft Percent Option of Max Displacement

Piston Pumps

XX
Controls Seal Mounting Flange Pressure Differential Type Compensator Pressure Setting1 Setting Factory set in bar times 10; Range 12-32 Code 20 00 XX Rotation* Right (CW) Left (CCW) Code N D V T Code 00 XX
(3)

Torque Control Setting

ThruDrive

Port Multiple Location Pump Option

Paint Option

Code 060 075 105 145 Code R L 37 (60) 46 (75) 64 (105) 88 (145)

Displacement in3/rev (cm3/rev)

Differential Pressure Setting Recommended Initial Factory Setting Use with PA Control only Factory set in bar Range 12-35 Seal Type Nitrile, single shaft seal Nitrile, double shaft seal wet flange Fluorocarbon, single shaft seal Fluorocarbon, double shaft seal wet flange Torque Control Setting (%) For Non-torque Control Pumps 20-90% of Max Rated Torque(3)

Code A B G* H*

Port Location Side Flanges, UNC Side Flanges, ISO 6149 (Metric) Rear Flanges, UNC Rear Flanges, ISO 6149 (Metric)

* Available on P2060 only

* Viewed from shaft end

Code 1 2 3 4 Code P U

Multiple Pump Option Single Pump Front Pump of Multiple Pumps Middle Pump of Multiple Pumps Rear Pump of Multiple Pumps Paint Option Parker Black No Paint

Code 00 XX Code B1 B2 C1 C2 C3 C5 C6 D1 D3
(1)

Percent of Max. Displacement 100% Stroke, standard factory setting Range is 70-99 (70% to 99%) Shaft Option Type SAE B Spline(1) SAE BB Spline SAE C Spline SAE CC Spline(2) SAE C Spline(2) SAE C Key SAE CC Key SAE D Key
(2) (2)

060 075 105 145 x x x x x x x x x x x x x x x x x x x x


075 thru-drive version only

See table below at left for information and example

Code S1 T1 A1 B1 B2 C2

Thru-drive No Thru-drive Thru-drive with Cover SAE A 2-Bolt with SAE A Spline SAE B 2-Bolt with SAE B Spline SAE B 2-Bolt with SAE BB Spline SAE C 2-Bolt with SAE CC Spline (145 only) SAE C 4-Bolt with SAE C Spline SAE C 4-Bolt with SAE CC Spline (145 only) SAE D 4-Bolt with SAE D Spline (145 only)

SAE D Spline

060 non thru-drive only

Code B C D Code PA LA LB TA(3) TB(3) TC(3) TD(3)


(3) (4)

Mounting Flange 060 SAE B 2-Bolt SAE C 4-Bolt SAE C SAE C SAE C 2/4-Bolt 2/4-Bolt 2-Bolt SAE D 4-Bolt Controls Std max pressure control (Pmax), 120-320 bar (1740-4600 PSI) Load sensing (2 spool)/Pmax without bleed orifice Load sensing (2 spool)/Pmax with bleed orifice Torque/LS/Pmax without bleed orifice, Torque range 20-60% of max Torque/LS/Pmax with bleed orifice, Torque range 20-60% of max Torque/LS/Pmax without bleed orifice, Torque range 50-90% of max Torque/LS/Pmax with bleed orifice, Torque range 50-90% of max 075 105 145

C3 C4 D3

P2 Torque Control Options TA, TB, TC, TD Ordering Guide


Model P2060 P2075 P2105 P2145 Maximum Rated Torque Nm 339 424 594 820 lb-in 3004 3755 5257 7259 TA/TB Adj. Range 20%-60% of Max Torque Nm 68-204 85-254 119-356 164-492 lb-in 600-1802 751-2253 1051-3154 1451-4355 TC/TD Adj. Range, 50%-90% of Max Torque Nm 170-306 212-382 297-535 410-738 lb-in 1502-2703 1877-3379 2628-4731 3629-6533

The input torque limit is factory set at a percentage of the maximum rated input torque The percentage needs to be specified in Torque Control Setting (%) box of the ordering code For example, for a P2075-TC pump with an input torque limit setting required of 300 Nm, divide 300 into 424, which equals 71%, so 71 is specified in Torque Control Setting (%) box

See table at left for information and example For Remote Pressure Compensator, order the PA model and remove plug from X port

= Not Available
1

For example, 32 = 320 bar setting

20

Piston Pumps (Mobile)


P3 High Pressure/Super Charged Mobile Piston Pumps
P3 Piston Pumps are ideal for open circuit mobile applications with high self priming speed and operating pressure up to 4650 PSI (320 BAR). These high performance pumps are suited for mobile applications where inlet fill characteristics are not ideal; i.e. high altitudes, long inlet lines, cold weather and high pump drive speeds.

Pump Performance Data


Model Series P3075 P3105 P3145 Displacement in3/rev (cc/rev) 458 (75) 641 (105) 885 (145) Max. Outlet Pressure PSI (BAR) 4650 (320) 4650 (320) 4650 (320) Rated Drive Speed RPM 3000 2600 2500 Flow GPM (LPM) 57 (2158) 67 (2536) 90 (3407) Input Horsepower HP (KW) 173 (1290) 210 (1566) 270 (2013)

Markets
Forestry Construction Mining Material Handling Drill Rigs, Loaders

Applications
Feller Bunchers, Knuckle Boom Loader, Skidder, Forwarder Wheel Loader, Dozers, Off-Highway Trucks, Truck Mounted Cranes, Lift Trucks, Reachstacker

21

Piston Pumps (Mobile)


P3 High Pressure/Super Charged Mobile Piston Pumps
Performance Characteristics
160 (215)

P3 Series Input Drive Power - 2000 RPM


40C Inlet Oil Temp - ISO VG 32 Fluid - Max Displacement

Shaft Input Power - kw (HP)

140 (188) 120 (161) 100 (134) 80 (107) 60 (80) 40 (54) 20 (27) 0 0 50 (725) 100 (1450) 150 (2176) 200 (2901) 250 (3626) 300 (4351) 350 (5075)

Pump Outlet Pressure - bar (PSI)


P3 105 P3 075

P3 145

P3 Series Pump Outlet Flow - 2000 RPM


300 (79.3)

40C Inlet Oil Temperature - ISO VG 32 Fluid - Maximum Displacement

Pump Outlet Flow - lpm (GPM)

250 (66.0) 200 (52.8) 150 (39.6) 100 (26.4) 50 (13.2) 0

Benefits/Features
Compact Low noise level Sealed shaft bearing Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed

50 (725)

Pump Outlet Pressure - bar (PSI)


P3 105 P3 075

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4351)

350 (5075)

P3 145

P3 Series Overall Efficiency - 2000 RPM


100

40C Inlet Oil Temperature - ISO 32 Fluid - Maximum Displacement

Overall Efficiency - %

90

80

70

60

50

50 (725)

100 (1450)

Pump Outlet Pressure - bar (PSI)


P3 075

150 (2176)

200 (2901)

250 (3626)

300 (4351)

350 (5076)

P3 145

P3 105

22

Piston Pumps (Mobile)


P3 High Pressure/Super Charged Mobile Piston Pumps

G B D E A C

Dimensions, inch (mm)


Series P3075 P3105 P3145 A Max* 1289 (3275) 1289 (3275) 1476 (3750) B Max. 1476 (125) 049 (125) 050 (127) C Max. 244 (62) 298 (756) 298 (756) D 441 (112) 441 (112) 449 (114) E Max. 686 (176) 826 (210) 898 (228) F 571 (145) 717 (182) 713 (181) G 472 (120) 587 (150) 634 (161)

* With thru-shaft option

Thru-drive Kits for P2 Series (Nitrile Seals, UNC Threads, Couplings)


Thru-drive Mounting SAE A with 9 tooth spline SAE B with 13 tooth spline SAE B with 15 tooth spline SAE C with 14 tooth spline SAE D with 13 tooth spline P3075 Kit # P2-075-0215-01N P2-075-0216-03N P2-075-0217-03N P2-075-0218-03N Not Available P3105 Kit # P2-105-0215-01N P2-105-0216-03N P2-105-0217-03N P2-105-0218-03N Not Available P3145 Kit # P2-145-0215-01N P2-145-0216-03N P2-145-0217-03N P2-145-0218-03N P2-145-0220-03N

23

P3 Model Ordering Code


P3
Pump Series Displace- Rotation ment

Piston Pumps

XX
Shaft Mounting Controls Differential Pressure Percant Option Flange Pressure Setting of Max Compensator Displacement Setting1 Factory set in bar times 10; Displacement Range 100-320 in3/rev (cm3/rev) Code 20 00 Rotation* Right (CW) Left (CCW) Code N D V T 145 x x x x x x
(3)

Seal Type

Torque Control Setting

ThruDrive

Multiple Port Location Pumps Option

Paint Option

Code 075 105 145 Code R L 46 (75) 64 (105) 88 (145)

Differential Pressure Setting Recommended Initial Factory Setting Use with PA Control only Factory set in bar Range 10-35

Code A B Code

Port Location Side Flanges, UNC Side Flanges, ISO 6149 (Metric) Multiple Pump Option Single Pump Front Pump of Multiple Pumps Middle Pump of Multiple Pumps Rear Pump of Multiple Pumps Paint Option Parker Black No Paint

XX

Seal Type Nitrile, single shaft seal Nitrile, double shaft seal wet flange Fluorocarbon, single shaft seal Fluorocarbon, double shaft seal wet flange Torque Control Setting (%) For Non-torque Control Pumps 20-90% of Max Rated Torque(3)

1 2 3 4 Code P U

* Viewed from shaft end

Code 00 XX Code C1 C2 C3 C5 C6 D1 D3
(2)

Percent of Max. Displacement 100% Stroke, standard factory setting Range is 70-99 (70% to 99%) Shaft Option Type SAE C Spline SAE CC Spline(2) SAE C Spline(2) SAE C Key SAE CC Key(2) SAE D Spline SAE D Key 075 x x x x x 105 x x x x x x

Code 00 XX

See table at bottom left for information and example

Code S1 T1 A1 B1 B2

Thru-drive No Thru-drive Thru-drive with Cover SAE A 2-Bolt with SAE A Spline SAE B 2-Bolt with SAE B Spline SAE B 2-Bolt with SAE BB Spline SAE C 2-Bolt with SAE CC Spline (145 only) SAE C 4-Bolt with SAE C Spline SAE C 4-Bolt with SAE CC Spline (145 only) SAE D 4-Bolt with SAE D Spline (145 only)

075 thru-drive version only

Code C D Code PA(4) LA LB TA(3) TB(3) TC(3) TD(3)


(3) (4)

Mounting Flange 075 SAE C 2/4-Bolt 105 SAE C 2/4-Bolt 145 SAE C 2-Bolt SAE D 4-Bolt Controls Std max pressure control (Pmax), 100-320 bar (1450-4600 PSI) Load sensing (2 spool)/Pmax without bleed orifice Load sensing (2 spool)/Pmax with bleed orifice Torque/LS/Pmax without bleed orifice, Torque range 20-60% of max Torque/LS/Pmax with bleed orifice, Torque range 20-60% of max Torque/LS/Pmax without bleed orifice, Torque range 50-90% of max Torque/LS/Pmax with bleed orifice, Torque range 50-90% of max

C2 C3 C4 D3

P3 Torque Control Options TA, TB, TC, TD Ordering Guide


Model P3075 P3105 P3145 Maximum Rated Torque Nm 424 594 820 lb-in 3755 5257 7259 TA/TB Adj. Range 20%-60% of Max Torque Nm 85-254 119-356 164-492 lb-in 751-2253 1051-3154 1451-4355 TC/TD Adj. Range, 50%-90% of Max Torque Nm 212-382 297-535 410-738 lb-in 1877-3379 2628-4731 3629-6533

The input torque limit is factory set at a percentage of the maximum rated input torque The percentage needs to be specified in Torque Control Setting (%) box of the ordering code For example, for a P3075-TC pump with an input torque limit setting required of 300 Nm, divide 300 into 424, which equals 71%, so 71 is specified in Torque Control Setting (%) box

See table at left for information and example For Remote Pressure Compensator, order the PA model and remove plug from X port

= Not Available
1

For example, 32 = 320 bar setting

24

Piston Pumps (Industrial)


PVplus High Pressure Industrial Piston Pumps
PVplus piston pumps are ideal for heavy duty industrial applications with operating pressure up to 5000 PSI (350 BAR). These pumps respond quickly to system demands and, with the use of ripple chamber technology, are some of the quietest piston pumps available.
High strength cast-iron housing Modular controls Large control piston for fast response Thru-shaft option with 100% thru torque capability Multiple pressure control Pre-Compression chamber

Pump Performance Data


Model Series PV016 PV020 PV023 PV028 PV032 PV040 PV046 PV063 PV080 PV092 PV140 PV180 PV270 PV360 Displacement in3/rev (cc/rev) 098 (16) 122 (20) 140 (23) 171 (28) 195 (32) 244 (40) 281 (46) 384 (63) 488 (80) 561 (92) 854 (140) 1098 (180) 1648 (270) 2197 (360) Max. Outlet Pressure PSI (BAR) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Max Rated Drive Speed RPM 3000 RPM 3000 RPM 3000 RPM 3000 RPM 2800 RPM 2800 RPM 2800 RPM 2800 RPM 2500 RPM 2300 RPM 2400 RPM 2200 RPM 1800 RPM 1750 RPM Pump Flow 1800 RPM & 100 PSI GPM (LPM) 8 (303) 95 (360) 11 (416) 13 (492) 15 (568) 19 (719) 22 (833) 30 (1136) 38 (1439) 44 (1666) 67 (2536) 86 (2355) 128 (4845) 160 (6057) Input Horsepower 1800 RPM & 5000 PSI HP (KW) 25 (186) 31 (231) 34 (254) 40 (298) 47 (350) 62 (462) 67 (500) 94 (701) 120 (895) 184 (1372) 200 (1491) 282 (2103) 400 (2983) 500 (3728)

Markets
Industrial Oil & Gas Construction Mining Material Handling Recycling Wheel Loader Drill Rigs, Tunneling Equipment

Applications
Presses, Shears, Injection Molding, Aircraft Test Stands, Test Equipment, Simulators Nitrogen Pumpers, Cementers, Coil Tubing, Oil Lift Pumps

Conveyor Drives, Apron Feeders, Rail Car Tippers, Mixers Shredders, Balers, Compactors

25

Piston Pumps (Industrial)


PVplus High Pressure Industrial Piston Pumps

Benefits/Features
High strength cast-iron housing for high reliability and quiet operation Modular controls for field convertibility Large control piston for fast response Thru-shaft option with 100% thru torque capability Multiple pressure control with valves mounted directly on pump Pre-compression chamber to minimize over-all system noise High self-priming speed and cold start capability

26

Piston Pumps (Industrial)


PVplus High Pressure Industrial Piston Pumps
Performance Characteristics
PV Series Overall Efficiency - 1800 rpm
100

PV Series Overall Efficiency - 1800 rpm


100

Standard Hydraulic Oil 100 SSU - 49C Inlet Oil Temp

Standard Hydraulic Oil 100 SSU - 49C Inlet Oil Temp

Overall Efficiency - %

Overall Efficiency - %

90

90

80

80

70

70

60

60

50

69 (1000)

Pump Outlet Pressure - bar (PSI)


PV 020 PV 023 PV 032

138 (2000)

207 (3000)

275 (4000)

345 (5000)

50

69 (1000)

Pump Outlet Pressure - bar (PSI)


PV 080 PV 092 PV 140

138 (2000)

207 (3000)

275 (4000)

345 (5000)

PV 016

PV 040

PV 046

PV 063 PV 360

PV 180

PV 270

PV Series Shaft Input Power - 1800 RPM


55.9 (75)

PV Series Shaft Input Power - 1800 RPM


298 (400)

Standard Hydraulic Oil 100 SSU - 49C Inlet Oil Temp

Standard Hydraulic Oil 100 SSU - 49C Inlet Oil Temp

Shaft Input Power - kw (HP)

Shaft Input Power - kw (HP)

44.7 (60)

239 (320)

33.6 (45)

179 (240)

22.4 (30) 11.2 (15)

119 (160) 60 (80)

69 (1000)

Pump Outlet Pressure - bar (PSI)


PV 020 PV 023 PV 032

138 (2000)

207 (3000)

275 (4000)

345 (5000)

69 (1000)

Pump Outlet Pressure - bar (PSI)


PV 080 PV 092 PV 140

138 (2000)

207 (3000)

275 (4000)

345 (5000)

PV 016

PV 040

PV 046

PV 063 PV 063

PV 180

PV 270

PV Series Output Flow - 1800 rpm


95 (25)

PV Series Output Flow - 1800 rpm


568 (150)

Standard Hydraulic Oil 100 SSU - 49C Inlet Oil Temp

Standard Hydraulic Oil 100 SSU - 49C Inlet Oil Temp

Pump Outlet Flow - lpm (GPM)

76 (20) 57 (15)

Pump Outlet Flow - lpm (GPM)


69 (1000) 138 (2000) 207 (3000) 275 (4000) 345 (5000)

454 (120) 341 (90)

38 (10) 19 (5)

227 (60) 114 (30)

Pump Outlet Pressure - bar (PSI)


PV 020 PV 023 PV 032

69 (1000)

Pump Outlet Pressure - bar (PSI)


PV 080 PV 092 PV 140

138 (2000)

207 (3000)

275 (4000)

345 (5000)

PV 016

PV 040

PV 046

PV 063

PV 180

PV 270

For 360 Consult Factory

27

Piston Pumps (Industrial)


PVplus High Pressure Industrial Piston Pumps
D

Shaft Option "K"

G B A A2 C E

Dimensions, inch (mm)


Model PV016/020/023 PV032/040/046 PV063/080/092 PV140/180 PV270 PV360 A 778 (195) 89 (227) 1129 (287) 138 (350) 186 (4725) 1877 (477) A2 Max. 835 (212) 96 (245) 1205 (306) 152 (385) 201 (510) 201 (510) B 037 (9) 050 (9) 050 (9) 050 (9) 050 (9) 050 (9) C 20 (52) 27 (68) 36 (92) 36 (92) 45 (115) 45 (115) D Max. 049 (1244) 219 (5562) 425 (10795) 425 (10795) E 52 (132) 61 (156) 80 (204) 78 (200) 104 (265) 984 (250) F 37 (94) 42 (107) 53 (135) 62 (158) 72 (184) 72 (184) G 31 (80) 36 (92) 46 (118) 57 (145) 69 (176) 69 (176) H 55 (140) 60 (153) 71 (181) 80 (204) 91 (230) 91 (230)

Filtration and auxiliary function pump suggestions

Pump
Model Code T67B-B02-3R00-A100 T67B-B04-3R00-A100 T67B-B07-3R00-A100 Flow @1800 RPM GPM (LPM) 3 (114) 6 (227) 10 (379) Pressure PSI (BAR) 4000 (2758) 4000 (2758) 4000 (2758)

Thru-Drive Kits
Pump Series PV016/020/023 PV032/040/046 PV063/080/092 PV140/180 PV270 PV270 Kit # MK-PVBG1BSN45 plus MK-PVBG1K1342 MK-PVBG2BSN40 plus MK-PVBG2K1340 MK-PVBG3BSN41 plus MK-PVBG3K1341 MK-PVBG4BSN40 plus MK-PVBG4K1340 MK-PVBG5BSN40 plus MK-PVBG5K1340 MK-PVBG5BSN40 plus MK-PVBG5K1340 Mount SAE B SAE B SAE B SAE B SAE B SAE B

* Verify correct design series

28

Piston Pumps
PV
Pump Variable Piston Code 016 020 023 028 032 040 046 Code R L CW CCW Displacement Rotation

PVplus 016-046cc Model Ordering Code

Pump Variations

Shaft & Mounting Code

Threads Code

Thru-Drive Option

Coupling Code

Seals

Control Options Second Pump (2nd Digit) Single Pump, No Coupling w/Coupling, 25 x 15 x 15, DIN 5480 w/Coupling, 32 x 15 x 20, DIN 5480 w/SAE Coupling, 9T-16/32 DP w/SAE Coupling, 11T-16/32 DP w/SAE Coupling, 13T-16/32 DP w/SAE Coupling, 15T-16/32 DP w/SAE Coupling, 14T-12/24 DP w/SAE Coupling, 17T-12/24 DP

Thru-Drive Option (1st Digit) Single Pump Prepared for Thru-Drive With Adapter for Second Pump SAE AA, 200in (508mm) SAE A, 325in (8255mm) SAE B, 400in (1016mm) SAE C, 500in (127mm) Metric, 248in (63mm) Metric, 315in (80mm) Metric, 394in (100mm) Metric, 492in (125mm)

Code 1 H J Y A B C* D E

Displacement in3/rev (cc/rev) 98 (16) 12 (20) 14 (23) 17 (28) 19 (32) 24 (40) 28 (46) Rotation*

T Y1 A B C2 G H J K
2

1 Only for PV016 thru PV023 2 Only for PV032 and larger * Only for PV032 and larger

*As viewed from shaft end

Code 1 H J Y A B C D Code N V W P

Coupling Code Single pump, no coupling with coupling 25 x 15 x 15, DIN 5480 with coupling 32 x 15 x 20, DIN 5480 with coupling SAE A 9T-16/32 DP with coupling SAE 11T-16/32 DP with coupling SAE B 13T-16/32 DP with coupling SAE B-B 15T-16/32 DP with coupling SAE C 14T-12/24 DP Seals Nitrile Fluorocarbon Nitrile w/PTFE Shaft Seal FPM w/PTFE Shaft Seal B C D E G H K M S 0 1 M M M M

Code 0 0 M R F T 1 0

Code 1 9* Standard

Pump Variations

Customized Displacement and/or Pressure Setting

*Specify in cc/rev and/or bar

Shaft & Mounting Code PV016/020/023 Shaft D Pilot PV032/040/046 Shaft Pilot 1" 4 Bolt Keyed SAE C (SAE C)

C 1 W K Z

1" Keyed 4 Bolt (SAE BB) SAE B

E K

15T 14T 4 Bolt 4 Bolt Spline Spline SAE B SAE C (SAE BB) (SAE C) 25mm Keyed 4 Bolt 100mm 32mm Keyed 4 Bolt 125mm

W32 x W25 x 15 15 x 20 x 15 4-Bolt x 8f 4 Bolt x 8f 100mm Spline 125mm Spline DIN DIN 5480 5480 Threads Code Port* BSPP UNF ISO 6149 ISO 6149 Threads** Metric UNC UNC Metric

Code 1 3 7 8

L C
NOTES: Compensator differential Dp is to be adjusted: Remote pressure comp, horsepower comp 15 1 bar Load-sensing comp (not horsepower comp) 10 1 bar (Codes MF* and LS part of MT*) Consult catalog on CD for electrohydraulic control options.

*Drain, gage, and flushing ports ** Mounting and connecting threads

F P U P 1 Not for MT 2 Only for MT

A B C D Z V

Control Options Standard Pressure Compensator No Compensator With Cover Plate, No Control Function Standard pressure control, integrated pilot valve Remote pressure control, integrated pilot valve Load Sensing (flow) control, integrated pilot valve Two spool LS control Remote/Load Sense Compensator Standard version 1 NG6 interface top side for pilot valves With unloading function, 24VDC solenoid 1 Prop-pilot valve type PVACRE35 mounted Without integrated pilot valve, NG6 interface, for mounting of accessory code PVAC MT1 with mounted pilot valve PVAC1P 2 Horsepower Compensator Control Nominal Horsepower at 1500 RPM 3 HP (195 Nm Torque) 4 HP (26 Nm Torque) 55 HP (36 Nm Torque) 75 HP (49 Nm Torque) 11 HP (71 Nm Torque) 15 HP (97 Nm Torque) 185 HP (120 Nm Torque) 22 HP (142 Nm Torque) 30 HP (195 Nm Torque) Function Horsepower Compensator Horsepower Compensator & Load Sensing Variation NG6 Interface Top Side No Pressure Compensation Adjustable Pressure Compensation Proportion Pilot Valve PVACPP* Mounted Accessories Mounted Electro Hydraulic Control Options Proportional displacement control, no pressure compensation Proportional displacement control, with pressurecompensation PV016/020/023 PV032/040/046

29

PVplus 063-360cc Model Ordering Code


PV
Pump Variable DisplacePiston ment Code 063 080 092 140 180 270 360 Code R L CW CCW Rotation Variations Shaft & Mounting Code T A B C D1 Rotation* E2 G3 H J K L
1

Piston Pumps

Threads Code

Thru-Drive Option

Coupling Code Code

Seals

Control Options Second Pump* (2nd Digit)

Displacement in3/rev (cc/rev) 38 (63) 48 (80) 56 (92) 85 (140) 109 (180) 165 (270) 220 (360)

Thru-Drive Option (1st Digit)

1 Single Pump Prepared for Thru-Drive No Second Pump and Coupling With Adapter for Second Pump 2 PV140 or PV180 Mounted SAE A, 325in 3 PV Pump Mounted (8255mm) 4 Gear Pump Series PGP Mounted SAE B, 400in * Specify 2nd pump with full (1016mm) model code SAE C, 500in COMPENSATOR NOTES: Compensator differential Dp is to be adjusted: (127mm) Remote pressure comp, power comp 15 1 bar SAE D, 600in (Codes FR* FT*, *L*, *C*, FPR, FPZ, FPG) (1524) mm Load-sensing comp (not power comp ) 10 1 bar (Codes FF*) SAE E, 650in Consult catalog on CD for electrohydraulic control options. (1651mm) Metric, 248in (63mm) Metric, 315in (80mm) Metric, 394in (100mm) Metric, 492in (125mm) Metric, 630in (160mm) Metric, 787in (200mm) 0 1 M M M M Code 0 0 M R F T 1 0 Control Options Standard Pressure Compensator No Compensator With Coverplate, No Control Function Standard pressure control, integrated pilot valve Remote pressure control, integrated pilot valve Load Sensing (flow) control, integrated pilot valve Two spool LS control Remote/Load Sense Compensator Standard version 1 NG6 interface top side for pilot valves With unloading function, 24VDC solenoid 1 Prop-pilot valve type PVACRE35 mounted Without integrated pilot valve, NG6 interface, for mounting of accessory code PVAC MT1 with mounted pilot valve PVAC1P 2 Horsepower Compensator Control Input Horsepower at 1500 RPM 11 HP (71 Nm Torque) 15 HP (97 Nm Torque) 185 HP (120 Nm Torque) 22 HP (142 Nm Torque) 30 HP (195 Nm Torque) 37 HP (240 Nm Torque) 45 HP (290 Nm Torque) 55 HP (355 Nm Torque) 75 HP (485 Nm Torque) 90 HP (585 Nm Torque) 110 HP (715 Nm Torque) 132 HP (850 Nm Torque) 160 HP (850 Nm Torque) 180 HP (850 Nm Torque) 200 HP (850 Nm Torque) Function Horsepower Compensator Horsepower Compensator & Load Sensing Variation NG6 Interface Top Side No Pressure Compensation Adjustable Pressure Compensation Proportional Pilot Valve PVACPP* Mounted Accessories Mounted 3 Electro Hydraulic Control Options Proportional displacement control, no pressure compensation Proportional displacement control, with pressurecompensation PV063/080/092 PV140 PV180 PV270 PV360

*As viewed from shaft end

Code 1 9* Standard

Pump Variations

Customized Displacement and/or Pressure Setting

*Specify in cc/rev and/or bar

M2

Shaft & Mounting PV063/ PV140/ Code PV270 080/092 180 Shaft Pilot Shaft Pilot Shaft Pilot D 4 2" 4 4 2" Bolt Keyed Bolt Bolt SAE SAE SAE SAE SAE Keyed D F D E 4 15T 4 15T 4 Bolt Spline Bolt Spline Bolt SAE SAE SAE SAE SAE D F D F E 1" 4 Keyed Bolt SAE SAE D D 13T 4 Spline Bolt SAE SAE D D 4 4 4 40mm Bolt 50mm Bolt 65mm Bolt Keyed 160 Keyed 160 Keyed 200 mm mm mm W40 x W50 x W60 x 15 x 4 2 x 24 4 2 x 28 4 25 Bolt x 9g Bolt x 9g Bolt x8f 160 Spline 160 Spline 200 Spline mm DIN mm DIN mm DIN 5480 5480 5480 Threads Code Port* BSPP UNF BSPP-M14 ISO 6149 ISO 6149 Threads** Metric UNC Metric UNC Metric 1" Keyed (SAE D) 13T Spline (SAE D)

1 Only for PV063 and larger 2 Only for PV270 3 Only up to PV092

C 1 W K Z

Code 1 H J K L Y A B C D E F G Code N V W

Coupling Code Single pump, no coupling with coupling 25 x 15 x 15, DIN 5480 with coupling 32 x 15 x 20, DIN 5480 with coupling 40 x 15 x 25, DIN 5480 with coupling 50 x 2 x 24, DIN 5480 with coupling SAE A 9T-16/32 DP with coupling SAE - 11T-16/32 DP with coupling SAE B 13T-16/32 DP with coupling SAE B-B 15T-16/32 DP with coupling SAE C 14T-12/24 DP with coupling SAE C - C with coupling SAE D, E with coupling SAE F Seals Nitrile Fluorocarbon Nitrile w/PTFE Shaft Seal FPM w/PTFE

G H K M S T U W Y Z 2 3 4 5 6

L C A B C D Z V

Code 1 3 4*** 7 8

P * Drain, gage, and flushing ports Shaft Seal ** Mounting and connecting threads *** Only for PV063-PV180; pressure port 1" with 4xM14 instead of 4xM12

30

F P U P 1 Not for MT 2 Only for MT 3 Accessories not included Please specify on order with full model code

Piston Pumps (Mobile & Industrial)


Premier Series High Pressure/Performance Piston Pumps
The open circuit Premier Series pumps are variable displacement piston pumps with emphasis on superior design with few maintenance requirements. Superior inlet characteristics allow the pumps to run faster than competitive models without the added expense of boosting the inlet. Modified pistons that reduce the amount of trapped fluid volume result in improved efficiency. The Premier Series pumps have been designed to operate on a variety of fluid types and in a wide range of industries where variable flow, high pressure and/or high speeds are required; such as: presses, construction machinery, injection molding, wood, aircraft, drilling, mining, steel and cranes.

Pump Performance Data


Model Series P05/P080 P07/P110 P09/P140 P12/P200 P16/P260 Displacement in3/rev (cc/rev) 490 (803) 670 (1098) 860 (1409) 1220 (2000) 1600 (2622) Max. Continuous Pressure PSI (BAR) 6000 (420) 6000 (420) 6000 (420) 6000 (420) 6000 (420) Max. Intermittent Pressure PSI (BAR) 7250 (500) 7250 (500) 7250 (500) 7250 (500) 7250 (500) Max Rated Drive Speed RPM 2550 2450 2300 2100 1850 Pump Flow 1800 RPM & 100 PSI GPM (LPM) 38 (1438) 52 (1968) 665 (2517) 95 (3596) 124 (4694) Input Horsepower 1800 RPM & 5000 PSI HP (KW) 113 (843) 171 (1275) 217 (1618) 308 (2297) 404 (3013)

Markets
Industrial Oil & Gas Mining Cementer & Pumper Centrifugal Drives Tram, Steering, Conveyors

Applications
Presses, Shears, Aircraft Test Stands, Test Equipment, Simulators

31

Piston Pumps (Mobile & Industrial)


Premier Series High Pressure/Performance Piston Pumps

Benefits/Features
Highest rated pressure of any comparable pump available in the market place today. Full power thru-drive capability allows two (2) pumps of the same displacement to be run in tandem at full rated pressure and flow, simultaneously. Fast, compensator response minimizes pressure overshoot. Two stage, pilot operated compensator provides sharp pressure cutoff at compensator setting, typically regulating pressure within 50 PSI (3.5 BAR). Compensator may easily be remotely controlled or used in load-sensing circuits. Precision barrel bearing absorbs radial forces, allowing longer operation at higher pressure and higher speeds. Piston design minimizes trapped oil volume to maximize efficiency. Angled barrel ports reduce the piston circle diameter, which allows oil to enter at reduced velocity. This allows the pump to run faster, with atmospheric inlet pressure. Spherical port plate and barrel face provides support to barrel to offset forces from angled ports. Large suction port reduces inlet flow velocity to allow the pumps to run at higher speeds with atmospheric inlet. Standard SAE split flange with inch or metric bolts, depending on pump version (SAE or metric)

Conforms to SAE or ISO mounting standards. Damped low inertia rocker cam allows very quick compensation, resulting in more stable and quieter pump. Heavy duty shaft bearing to absorb side and thrust loads. High pressure shaft seal allows higher case pressure without external leakage. Note: it is always advisable to maintain the lowest possible case pressure. Drive shaft options include keyed or splined in SAE, ISO and DIN. A wide variety of optional controls are available and are designed with simplicity and a maximum of common elements.

32

Piston Pumps (Mobile & Industrial)


Premier Series High Pressure/Performance Piston Pumps
Performance Characteristics
Premier Series Input Drive Power - 1800 RPM
500 (670)

40C Inlet Oil Temperature ISO VG 32 Fluid Max. Displacement

Shaft Input Power kw (HP)

400 (536)

300 (402)

200 (268) 100 (134)

100 (1450)

Pump Outlet Pressure - bar (PSI)


07/110 09/140 12/200

200 (2900)

300 (4350)

400 (5800)

500 (7250)

05/080

16/260

Premier Series Pump Outlet Flow - 1800 RPM


500 (132)

40C Inlet Oil Temperature ISO VG 32 Fluid Max. Displacement

Pump Outlet Flow - lpm (GPM)

400 (106)

300 (79)

200 (53) 100 (26)

100 (1450)

Pump Outlet Pressure - bar (PSI)


07/110 09/140 12/200

200 (2900)

300 (4350)

400 (5800)

500 (7250)

05/080

16/260

Premier Series Overall Efficiency - 1800 RPM


100

40C Inlet Oil Temperature ISO VG 32 Fluid Max. Displacement

Overall Efficiency %

90

80

70

60

50

100 (1450)

Pump Outlet Pressure - bar (PSI)


07/110 09/140 12/200

200 (2900)

300 (4350)

400 (5800)

500 (7250)

05/080

16/260

33

Piston Pumps (Mobile & Industrial)


Premier Series High Pressure/Performance Piston Pumps

K
HANDWHEEL ADJ. MAX. VOLUME STOP

OPTIONAL REAR ADAPTER

AC LVDT

A C B

H D G

Dimensions, inch (mm)


Series P05 P080 P07 P110 P09 P140 P12 P200 P16 P260 A1* 1376 (2255) 2133 (3495) 1489 (2240) 2308 (3782) 1609 (2677) 2494 (4087) 1726 (2828) 2675 (4384) 1902 (3117) 2985 (4892) A2* 134 (2186) 2077 (3404) 1471 (2411) 2280 (3736) 1591 (2607) 2466 (4041) 1715 (2810) 2658 (4356) 1875 (3073) 2943 (4823) B 049 (80) 061 (100) 049 (80) 061 (100) 049 (80) 064 (105) 063 (103) 058 (95) 063 (103) 058 (95) C max 561 (92) 561 (92) 561 (92) 561 (92) 561 (92) D 105 (1721) 1628 (2667) 105 (1721) 1628 (2667) 119 (311) 1844 (3022) 148 (2425) 2294 (376) 1466 (2402) 2273 (3724) E 437 (716) 678 (1111) 437 (716) 678 (1111) 45 (737) 698 (1143) 45 (737) 698 (1143) 45 (737) 698 (1143) F 437 (716) 678 (1111) 452 (741) 701 (1149) 483 (791) 749 (1227) 537 (880) 832 (1364) 55 (901) 891 (1460) G 6000-5998 (9832-9829) 10984-10980 (18000-17993) 6000-4998 (9832-8190) 10984-10980 (18000-17993) 6000-5998 (9832-9829) 10984-10980 (18000-17993) 6500-6498 (10652-10648) 13669-13666 (22400-22395) 6500-6498 (10652-10648) 15256-15254 (25000-24996) H 761 (1247) 1180 (1934) 777 (1273) 1205 (1975) 843 (1381) 1307 (2142) 826 (1354) 1281 (2099) 843 (1381) 1307 (2142) J 623 (1021) 965 (1582) 626 (1026) 971 (1592) 679 (1113) 1051 (1723) 692 (1134) 1073 (1758) 727 (1191) 1128 (1848) K 1344 (2202) 2083 (3413) 1347 (2207) 2394 (3923) 1419 (2325) 2200 (3605) 1431 (2345) 2219 (3637) 1457 (2388) 2259 (3702)

*A1 = without rear drive, A2 = with rear drive

34

Piston Pumps
P
Pump Displacement

Premier Model Ordering Code

Style

Shaft

Rotation

Seals

Design 1

Primary Controls

Primary Control Options

Secondary Controls

Code 05 07 09 12 16 080 110 140 200 260 Code H Q Omit Code 2 3 5 Keyed SAE or ISO Splined SAE or ISO

Displacement 490 in3/rev (803 cc/rev) 670 in3/rev (1098 cc/rev) 860 in3/rev (1409 cc/rev) 1220 in3/rev (2000 cc/rev) 1600 in3/rev (2622 cc/rev) 490 in3/rev (803 cc/rev) 670 in3/rev (1098 cc/rev) 860 in3/rev (1409 cc/rev) 1220 in3/rev (2000 cc/rev) 1600 in3/rev (2622 cc/rev) Style High Speed (> 1800 RPM) P16, P260, P12, P200, P09 & P140 only High Speed ( 1800 RPM) P16, P260, P12, P200, P09 & P140 only P07, P110, P05 & P080 Shaft

Code C L M R H E J K V W Y Z Code 1 2 3 4 5 6 7 8 Compensator

Primary Controls Load Sensing Compensator (50 PSI (34 BAR) Pressure Drop) Load Sensing Compensator (200 PSI (138 BAR) Pressure Drop) Rotary Servo Hydraulic Servo Electrohydraulic Servo** Low Torque Limiter High Torque Limiter Load Sensing (L) + Low Torque Limiter (J) Load Sensing (L) + High Torque Limiter (K) Load Sensing (M) + Low Torque Limiter (J) Load Sensing (M) + High Torque Limiter (K) Primary Control Options Max Volume Screw without Indicator Handwheel Max Volume Control without Indicator (not available w/R, H, E & X primary controls) Max Volume Screw with Potentiometer** Max Volume Screw with LVDT** Max Volume Screw with Mechanical Cam Angle Indicator Handwheel Max Volume Control with Petentiometer** (not available with R, H, E & X primary controls) Handwheel Max Volume Control with LVDT** (not available with R, H, E & X primary controls) Handwheel Max Volume Control with Mechanical Cam Angle Indicator (not available w/R, H, E & X primary controls) Secondary Controls None Compensator Override ( for E, H & R primary controls only) Low Torque Limiter Override (for E, H & R primary controls only) High Torque Limiter Override (for E, H & R primary controls only)

Splined SAE High Torque (P16 only) Keyed DIN (metric pumps only) DIN 40mm for sizes 080 & 110 DIN 50mm for sizes 140 & 200 DIN 60mm for size 200 Splined DIN (metric pumps only) DIN 40mm for sizes 080 & 110 DIN 50mm for sizes 140 & 200 DIN 60mm for size 200 Keyed DIN (DIN 60mm for size 200 only) Splined DIN (DIN 60mm for size 200 only) Rotation Clockwise Counterclockwise Seals Nitrile (Buna-N) EPR 2 Fluorocarbon

7 8 9 Code R L Code 1 4 5

Code 0 P J K

1 Assigned by manufactorer 2 Not approved for ATEX applications

35

Premier Model Ordering Code

Piston Pumps

External Drive

External Mounting

Special Modifications

Code 0 M A G B Q C N D E T U L S R V W X Y Z None Rear Blanking Plate

External Drive

Code 0 1

External Mounting No External Pump Mounted External Pump Mounted (must be separately specified) Requires Special Modification -M2 Special Modifications None No Paint 3 ATEX APPROVED PUMP (May include additional modifications) Other Special Modification (example: bronze caged barrel bearing for low viscosity fluids, mechanical shaft seal, hydrostatic cam, tandem pumps, etc) 3

SAE-A (SAE 82-2) with SAE-A (SAE 16-4) Coupling SAE-A (SAE 82-2) with SAE-B (SAE 22-4) Coupling SAE-B (SAE 101-2 & SAE 101-4) with SAE-B (SAE 22-4) Coupling SAE-B (SAE 101-2 & SAE 101-4) with SAE-BB (SAE 25-4) Coupling SAE-C (SAE 127-2 & SAE 127-4) with SAE-C (SAE 32-4) Coupling SAE-C (SAE 127-2 & SAE 127-4) with SAE-CC (SAE 38-4) Coupling SAE-D (SAE 152-2 & SAE 152-4) with SAE-D & SAE-E (SAE 44-4) Coupling SAE-E (SAE 165-2 & SAE 165-4) with SAE-D & SAE -E (SAE 44-4) Coupling P12/200 & P16/260 only ISO 180 B4HW Flange, K40N Coupling ISO 180 B4HW Flange, K50N Coupling ISO 180 B4HW Flange, DIN 40-18 Coupling P16/260 only ISO 180 B4HW Flange, DIN 50-24 Coupling P16/260 only ISO 224 B4HW Flange, K50N Coupling P12/200 & P16/260 only ISO 250 B4HW Flange, K50N Coupling P16/260 only ISO 200 B4HW Flgnae, K50N Coupling P12/200 & P26/260 only ISO 160 B4HW Flange, K40N Coupling ISO 125 B4HW Flange, K32N Coupling ISO 100 B4HW Flange, K25N Coupling

Code Omit NP EX

M2

3 These options are not approved for ATEX applications

Allowable Controls **
Primary Control C E H J K L M R V W Y Z Primary Option Plus Secondary Control 10
l l l l l l l l l l l l l l l l l l l l

20
l

30
l l l l l l l l l l l l

40
l l l l l l l l l l l l

50
l l l l l l l l l l l l

60
l

70
l

80
l

1P

3P

4P

5P

1J

3J

4J

5J

1K

3K

4K

5K

l l l l l l l l l l l l l l l l l l l l l l l l l l l

l l

l l

l l

l l

l l

l l

l l

l l

l l

l l

l l

** The following control options are not available for ATEX 94/9EC: Electrohydraulic Servo (E**) and use of either potentiometer or LVDT position feedback (*3*, *4*, *6*, *7*)

= Omit if not required

36

Piston Pumps (Mobile)


VP1 Load Sensing Truck Pumps
The VP1 is the worlds first variable displacement pump for truck applications. It can be close-coupled to a gearbox PTO (power take-off ) or to a coupling independent PTO (e.g. an engine PTO) which meets ISO standard 7653-1985.
Variable displacement Low noise level High power-to-weight ratio Compact and lightweight Highly efficient Sturdy design Withstands low temperatures Can be close coupled and tandem mounted

Pump Performance Data


Model Series VP1-45 VP1-75 VP1-120 Max. Displacement in3/rev (cc/rev) 275 (45) 458 (75) 732 (120) Outlet Pressure PSI (BAR) 4350 (300) 4350 (300) 4350 (300) Drive Speed RPM 2400 2100 1800 Flow @ Rated RPM GPM (LPM) 26 (984) 39 (1476) 53 (2006) Max. Horsepower HP (KW) 80 (597) 120 (895) 165 (1230)

Markets
Forestry Construction Mining Material Handling Recycling Military Knuckle Boom Loader, Cranes Off-Highway Trucks, Fan Drives Dump Trucks Truck Mounted Cranes, Lift Trucks

Applications

Vaccum Truck Systems, Refuse Trucks - ASL, Rear Loaders Fan Drives

2 x Fitting, tube 3/8", JIC 9/16" 1 x Spacer, 1 x Gasket (not included) 1 x Fitting, tube 3/4", JIC 1 1/16 1 x Hose fitting, 2" Fixture bracket (not inlcuded)

2x bolts (M12 x 110) DIN 913, MP6SS socket head tool (6mm) Tightening torque 30Nm 1 x Gasket 2x Nut M12 (ISO 4032, M6M-8) 2x Locking nut M12 (DIN 982-8) Tightening torque 80 Nm 2x Locking nut M12 (DIN 982-8) Tightening torque 65 Nm Alt. position for fixture bracket bolts

Note: Complete Mounting and Fitting Kit available as part number dwg of kit 3785286. Contains BSP to JIC fittings for suction, pressure, load sense and drain lines along with studs for rear support and optional PTO shim plate with extra gasket.

37

Piston Pumps (Mobile)


VP1 Load Sensing Truck Pumps

Benefits/Features
Thru-drive capability on VP1-045 and VP1-075 Higher self-priming speeds Operating pressures to 5801.51 PSI (400 BAR) New frame sizes to meet market requirements Higher overall efficiency Increased reliability Reduced noise level Smaller installation dimensions Control Load sense and pressure limiter Control Performance Data on response Thru-drive Fitting Kit 3797795 will accommodate mounting a DIN 5462 pump to the rear of the VP1. Check the factory for torque limitations on rear mount.

38

Piston Pumps (Mobile)


VP1 Load Sensing Truck Pumps
73 max 73 max R.H. rotation L.H. rotation

G max

B A D max
64 35

M
E

T
12

IMPORTANT! The control is not drained through the pump case. An external line must be installed between the control drain port T and the reservoir.
B

IMPORTANT! The control is not drained through the pump case. An external line must be installed between the control drain port T and the reservoir.

191

Dimensions, inch (mm)


Series VP1-045 VP1-075 VP1-120 A max 1089 (2765) 1059 (269) B 033 (85) 035 (9) C 217 (55) 217 (55) D max 520 (132) 492 (125) E 220 (56) 268 (68) F 453 (115) 378 (96) G max 280 (71) 374 (95) H max 287 (73)

39

VPI Model Ordering Code


VP1
Variable Displacenent Pump Code 045 075 120

Piston Pumps
Ordering No. 378 0334 378 0335 378 0336 378 0337 378 3182 378 3183

Frame Size

Rotation Code Frame Size 275 in3/rev (45 cc/rev) 458 in /rev (75 cc/rev)
3

Ordering Code VP1-045-R VP1-045-L Rotation Left Hand (CCW) Right Hand (CW) VP1-075-R VP1-075-L VP1-120-R VP1-120-L

L R

732 in3/rev (120 cc/rev)

NOTES: 1 All fittings must be ordered separately 2. Use seven digit number when placing order. 3 Fitting Kit 378 5286 provides adapter fittings for inlet /outlet,

load sense and drain ports to JIC connections, along with the mounting gasket and support studs for installation

Fitting Kits

Each kit consists of a pressure fitting, a suction fitting and corresponding seal washers

Pressure fitting

C1

Kits with straight suction fitting


Ordering no. 370 4936 370 7220 * * Above 100 l/min C1 BSP " (191mm) BSP 1" (254mm) C2 dia. 2" (508mm) 2" (508mm)

Straight suction fitting

C2

Pressure fitting

Kits with 45 suction fitting


Ordering no. 379 9563 379 9562* A in. (mm) 280 (71) 252 (64) B in. (mm) 606 (154) 579 (147) C1 BSP " (191mm) BSP 1" (254mm) C2 dia. 2" (508mm) 2" (635mm)

C2

C1

* Above 100 l/min

45 adjustable suction fitting Pressure fitting

C2 C1

Kits with 90 suction fitting


Ordering no. 379 9918 A in. (mm) 567 (144) B in. (mm) 504 (128) C1 BSP 1" (254mm) C2 dia. 2" (508mm)

90 adjustable suction fitting 40

Fittings_install_GB.eps Leif A./020115

Piston Pumps (Mobile & Industrial)


PAVC Medium Pressure/Super Charged Piston Pumps
PAVC piston pumps are ideal for many applications with operating pressure up to 3000 PSI (210 BAR). These compact pumps feature convenient cartridge style controls and carry a full pressure rating on most water glycol fluids.
High strength cast-iron housing Built-in supercharger High speed capability - 3000 RPM (2600 RPM PAVC100) Sealed shaft bearing Two piece design for ease of service Cartridge bronze clad port plate Airbleed standard for quick priming Hydrodynamic cylinder barrel bearing Thru-shaft (PAVC100 only) Full pressure rating on water glycol fluids Pump case and shaft seal - see inlet pressure only Filter and/or cool drain line (100 PSI Max.) (6.9 BAR Max.)

Pump Performance Data


Model Series PAVC33 PAVC38 PAVC65 PAVC100 Max. Displacement in3/rev (cc/rev) 201 (33) 232 (38) 397 (65) 610 100) Rated Outlet Pressure PSI (BAR) 3000 (210) 3000 (210) 3000 (210) 3000 (210) Drive Speed RPM 3000 3000 3000 2600 At MAX RPM and 3000 PSI Flow Input Horsepower GPM (LPM) HP (KW) 25 (946) 28 (1060) 52 (1968) 69 (2612) 50 (373) 55 (410) 96 (716) 140 (1044)

41

Piston Pumps (Mobile & Industrial)


PAVC Medium Pressure/Super Charged Piston Pumps
Performance Characteristics
82.0 (110)

PAVC Series Shaft Input Power - 2000 RPM


49C Inlet Oil Temp - ISO VG 32 Fluid - Max Displacement

Shaft Input Power - kw (HP)

67.1 (90) 52.2 (70) 37.3 (50) 22.4 (30) 7.5 (10 ) 0 0 69 (1000) 138 (2000) 207 (3000)

Pump Outlet Pressure - bar (PSI)


PAVC 100 PAVC 65 PAVC 33

Benefits/Features
High strength cast-iron housing Built-in supercharger ensures high speed capability - 3000 RPM (2600 RPM PAVC100) Sealed shaft bearing Two-piece design for ease of service Cartridge type controls field changeable Replaceable bronze clad port plate Airbleed standard for quick priming Hydrodynamic cylinder barrel bearing Thru-shaft (PAVC100 only) Full pressure rating on most water glycol fluids Pump case and shaft seal are subjected to inlet pressure only Filter and/or cool drain line 100 PSI (7 BAR) maximum
208.2 (55)

PAVC Series Pump Outlet Flow - 2000 RPM


49C Inlet Oil Temperature - ISO VG 32 Fluid - Maximum Displacement

Pump Outlet Flow - lpm (GPM)

170.3 (45) 132.5 (35) 94.6 (25) 56.8 (15) 18.9 (5) 0

Pump Outlet Pressure - bar (PSI)


PAVC 100 PAVC 65 PAVC 33

69 (1000)

138 (2000)

207 (3000)

PAVC Series Overall Efficiency - 2000 RPM


100

49C Inlet Oil Temperature - ISO 32 Fluid - Maximum Displacement

90

Overall Efficiency - %

80

Controls
Pressure compensation Load sensing Power (torque) limiting Power and load sensing Remote pressure compensation Adjustable maximum volume stop Low pressure standby

70

60

50

40

Pump Outlet Pressure - bar (PSI)


PAVC 100 PAVC 65 PAVC 33

69 (1000)

138 (2000)

207 (3000)

42

Piston Pumps (Mobile & Industrial)


PAVC Medium Pressure/Super Charged Piston Pumps
Front View
D E C B

Side View
A
ROTATION ARROW

(Rear, Side or Top Ports)

(Bottom Ports)

Dimensions, inch (mm)


Dim. A B C D E F G H J PAVC33/38 Rear Ported 725 (18415) 037 (939) 231 (5867) 331 (8407) 331 (8407) 250 (6350) 381 (9677) Side Ported 732 (18593) 037 (937) 231 (5867) 417 (10592) 353 (8966) 250 (6350) 412 (10465) PAVC65 Rear Ported 882 (22403) 049 (1245) 219 (5563) 400 (10160) 400 (10160) 350 (8890 456 (11582) Top Ported 882 (22402) 049 (1244) 219 (5562) 400 (10160) 400 (10160) 338 (8585) 456 (11582)

(Bottom Port)

PAVC100 Rear Ported 1195 (30353) 049 (1244) 219 (5562) 425 (10795) 425 (10795) 462 (11734) 557 (14147) 624 (15849) Top/Bottom Ported 1221 (31013) 049 (1244) 219 (5562) 425 (10794) 425 (10794) 450 (11430) 625 (15925) 937 (23799) 624 (15949)

PAVC100 SAE B, SAE BB and SAE C Thru-drive Kits


Pump Series PAVC 1006B3 PAVC 1006B4 PAVC 1006C3 Mount SAE B SAE B SAE C Spline SAE B SAE BB SAE C Kit # 787076 787077 787076

Note: Pumps can be converted from/to SAE B, BB or SAE C thru-drives by using the kits listed.

43

PAVC Model Ordering Code


PAVC
Pump Multiple Pumps Axial Piston Variable Controllable Code Displacement Bearing Option Shaft Option Outlet Port Inlet Port Rotation

Piston Pumps
Omit

Volume ThruPaint Thru- Control Stop Shaft Options Shaft Nitrile Adjustable Option Threads Variations (Standard) Differential Seals Inlet Port

Multiple Pumps

Multiple Pumps Factory Mounted to Rear of Another Pump Displacement in3/rev (cm3/rev) 20 (33) 23 (38) 40 (65) 61 (100)

Omit Single Pump Code 33 38 65 100 Code Omit 9*

Code Omit 2 Code R L

33/38 Inlet Str Thd, Rear Flange, Side

65 Inlet Str Thd, Rear Flange, Top

100 Inlet Flange, Rear Flange, Top/Bottom Code Omit A *C *H **M **ME AM *CM *HM

Type SAE/Inch Threads SAE/Inch Threads

Rotation* Right CW Left CCW

Control Option Standard Pressure Compensated Setting Pressure 41-207 bar (600-3000 PSI) Pressure & Flow (Load Sensing) Pressure, Flow & Power Pressure Comp & Power Remote Pressure Remote Pressure Remote Pressure & Flow Remote Pressure, Flow & Power Remote Pressure & Power

* Viewed from shaft end

Code Bearing Option Single Piece Shaft Dual Bearing Omit 2 5*

Volume Stop Options Volume Stop Plugged Maximum Volume Stop Max Volume Stop with O-ring

* For applications where side loading may be experienced Max side load = 1134 kg (250 lbs) Typical Applications: Belt/chain drive Universal joint drive Massive couplings Foot mount installations

* Not available with ThruShaft option on Size 100

Code Omit 6

Thru-Shaft Threads* No Thru-Shaft Thru-Shaft, UNC

* Available on Size 100 only

Code Omit B C* D*

Shaft Option Size 33/38 Size 65/100 7/8" Keyed SAE B 1" Keyed SAE C 13T Spline SAE B 14T Spline SAE C 1" Keyed SAE CC 17T Spline SAE CC

Code Omit A3 A4 *B3

Thru-Shaft Variations No Thru-Shaft Option Thru-Shaft, SAE AA Pilot, 9 Tooth 20/40 Pitch Spline Coupling, PAVC 100 Only Thru-Shaft, SAE A Pilot, 9 Tooth 16/32 Pitch Spline Coupling, PAVC 100 Only Thru-Shaft, SAE B Pilot, 13 Tooth 16/32 Pitch Spline Coupling, PAVC 100 Only Thru-Shaft, SAE B Pilot, 15 Tooth 16/32 Pitch Spline Coupling, PAVC 100 Only Thru-Shaft, SAE C Pilot, 14 Tooth 12/24 Pitch Spline Coupling, PAVC 100 Only

* Power controlled pumps (H, C, HM or CM) must have maximum input power limit specifications at a particular drive speed (RPM) and compensator pressure setting (PSI) included with order Power controlled pumps that do not have input power limit specifications, will be set at default setting (225 HP @ 1800 RPM and 3000 PSI) H & C (60 HP @ 1800 RPM and 3000 PSI) HM & CM ** M may be remotely controlled; ME requires external pilot Pumps with M, ME, AM, CM or HM controls will be set to compensate at 207 bar (3000 PSI) unless Chart #1 specifies otherwise

* Size 100 only

Code Omit P Code Omit No Paint Paint

Painting

Code Omit 3*

Outlet Port Outlet Flange Location Top Type SAE/Inch SAE/Inch Str Thread Top

*B4 *C3

Multiple Pumps Single Pump Pump Factory Mounted on Rear

* Size 100 only

Inlet port option 2 or 8 (top/bottom) must be used with all Thru-Shaft pumps * Use SAE C-C shaft on thru-shaft pump variation when combined input torque of front and rear pumps exceeds 565 Nm (5000 In-Lbs).

Chart #1
Item RPM PSI HP GPM Setting

Ordering Notes
Unless otherwise specified, pump is shipped at maximum GPM (1800 RPM) and set to 69 bar (1000 PSI) [See Exceptions] When factory settings are required, the items shown in Chart #1 must be included with order

= Omit if not required or to select standard option coded omit

44

Piston Pumps (Mobile)


F11 Small Frame Fixed Displacement Bent-Axis Pumps
F11 is a well proven bent axis, fixed displacement heavy-duty pump Series. They can be used in open or closed circuit applications where high efficiency, high drive speeds, high pressure and indirect drives are desired. The F11 will provide high output flows in a very compact package.

Pump Performance Data


Model Series F11005 F11006 F11010 F11012 F11014 F11019 Displacement in3/rev (cc/rev) 030 (49) 037 (60) 060 (98) 076 (125) 087 (143) 116 (190) Continuous Pressure PSI (BAR) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Rated Speed RPM 4600 4200 4200 3850 3900 3500 Flow @ Rated RPM GPM (LPM) 55 (208) 66 (250) 11 (416) 125 (473) 14 (530) 17 (644)

Markets
Forestry Industrial Marine Oil & Gas Construction Mining Material Handling Recycling Military Aircraft Test Stands

Applications
Saw Drives, Feller Bunchers, Skidder, Forwarder, Cranes, Mowers / Cutters Deck Cranes, Constant Tension Winches, Hatch Covers Nitrogen Pumpers, Frac Trucks, Coil Tubing Skid Steer, Off-Highway Trucks, Fan Drives, Cranes, Dust Collector, Excavator Drill Rigs, Top Drives, Loaders, Subsurface Loaders, Tunneling Equipment Conveyor Drives, Truck Mounted Cranes, Mixers Shredders, Vaccum Truck Systems Fan Drives

45

Piston Pumps (Mobile)


F11 Small Frame Fixed Displacement Bent-Axis Pumps/Motors
Performance Characteristics
F11 Series Overall Efficiency
100

Pump - 250 bar (3625 PSI)

Overall Efficiency - %

95

90

85

80

1000

2000

3000

4000

5000

Speed (rpm)
F11-5 F11-10 F11-19

Benefits/Features
F11 fixed pumps can be used at unusually high shaft speeds Intermittent operating pressures to 6000 PSI (413.7 BAR) Compact, lightweight pump, high power to weight ratio Laminated piston ring provides low internal leakage and thermal shock resistance F11 Series have very few moving parts providing long life and service friendly design Heavy duty roller bearings for indirect drive

46

Piston Pumps (Mobile)


F11-150 F11 Small Frame Fixed Displacement Bent-Axis Pumps/Motors
F11-14
(SAE versions)

(SAE version)

F max

B C

B C1

CCW

CW

H
A

G max

Dimensions, inch (mm)


Series F11-05 F11-06 F11-10 F11-12 F11-14 F11-19 A max 528 (1341) 621 (1757) 621 (1757) 614 (1560) 621 (1757) 713 (1811) B 31 (78) 031 (79) 031 (79) 55 (140) 031 (79) 031 (79) C 157 (399) 150 (381) 150 (381) 197 (500) 150 (381) 150 (381) C1 039 (889) 130 (330) 130 (330) 87 (221) 130 (330) 130 (330) D E F 331 (841) G max 50 (1270) H 187 (475) 256 (650)

H max

378 (960)

209 (531) 402 (1021) 398 (1011) 685 (1740) 472 (1199) 209 (531) 402 (1021) 398 (1011) 685 (1740) 472 (1199) 209 (531) 402 (1021) 398 (1011) 598 (1519) 457 (1161) 209 (531) 402 (1021) 398 (1011) 685 (1740) 472 (1199) 248 (630) 346) (879) 449 (1140) 693 (1760) 484 (1229)

47

F11 Model Ordering Code


F11
Bent Axis Pump

Piston Pumps

Version Number2 Option3

Function Main Ports

S
SAE Mounting Flange1 Shaft Seal

Shaft

Speed Sensor Option

Displacement in3/rev (cc/rev)

Code 005* 010* 012* 014 019


3

Displacement in3/rev (cc/rev) 030 in /rev (49 cc/r) 060 in3/rev (98 cc/r) 076 in3/rev (125 cc/r) 087 in3/rev (143 cc/r) 116 in3/rev (190 cc/r)

Code N V

Shaft Seal NBR*, Low Pressure FPM**, High Pressure, High Temperature

005 x x

010 x x

012

014

019 x x

* NBR - Nitrile rubber ** FPM - Fluorocarbon rubber Code 014 x x 014 x 019 x x 019 x x T S K D Code P Shaft SAE Key SAE Spline Metric Key DIN 5480 Spline Speed Sensor Prepared for Speed Sensor 005 010 012 014 x x x x 014 x 019 x x x x 019 x

* ISO or CETOP mounting options, see catalog on CD Code R L Code U B F Function Pump, CW Rotation Pump, CCW Rotation Main Ports SAE, UN Threads BSP Threads SAE 6000 PSI Flange* 005 x x 005 x x 010 x x 010 x x x 012 x x 012

x x x 005

x x x 010

x x x 012 x

x x

Order speed sensor kit# 3785190 separately

* Metric threads

x: Available
1

: Not Available

CETOP and ISO mounting also available See catalog on CD Assigned by factory for special versions None (see catalog on CD)

48

Piston Pumps (Mobile)


F12 Large Frame Fixed Displacement Bent-Axis Pumps
F12 is a high performance, bent axis, fixed displacement heavyduty pump series. They can be used in numerous applications where high efficiency, high drive speeds, high pressure and indirect drives are desired. The F12 will provide high output flows in a very compact package.

Pump Performance Data


Model Series F12-030 F12-040 F12-060 F12-080 F12-090 F12-110 F12-125 F12-150 F12-250 Displacement in3/rev (cc/rev) 183 (300) 244 (400) 364 (596) 491 (804) 568 (930) 672 (1101) 763 (1250) 915 (1500) 1477 (2420) Continuous Pressure PSI (BAR) 6000 (420) 6000 (420) 6000 (420) 6000 (420) 6000 (420) 6000 (420) 6000 (420) 5000 (350) 5000 (350) Rated Speed RPM 3150 2870 2500 2300 2300 2290 2290 3200 2700 Flow GPM (LPM) 23 (871) 28 (1060) 37 (1401) 46 (1741) 535 (2025) 63 (2385) 72 (2725) 103 (3899) 154 (5830)

Markets
Forestry Industrial Marine Oil & Gas Construction Mining Material Handling Recycling Military Aircraft Test Stands

Applications
Saw Drives, Feller Bunchers, Skidder, Forwarder, Cranes, Mowers / Cutters Deck Cranes, Constant Tension Winches, Hatch Covers Nitrogen Pumpers, Frac Trucks Skid Steer, Off-Highway Trucks, Fan Drives, Cranes, Dust Collector, Excavator Drill Rigs, Top Drives, Loaders, Subsurface Loaders, Tunneling Equipment Conveyor Drives, Truck Mounted Cranes, Mixers Shredders, Vaccum Truck Systems Fan Drives

49

Piston Pumps (Mobile)


F12 Large Frame Fixed Displacement Bent-Axis Pumps
Performance Characteristics
100

F12 Series Overall Efficiency


Pump - 420 bar (6092 PSI)

Overall Efficiency - %

95

90

85

1000

2000

3000

60

Speed (rpm)
F12-30 F12-40 F12-60

F12 Series Overall Efficiency


100

Pump - 420 bar (6092 PSI)

Overall Efficiency - %

95

90

110 Benefits/Features
Intermittent operating pressures to 7000 PSI (482.6 BAR) Compact, lightweight pump with high power to weight ratio Laminated piston ring provides low internal leakage and thermal shock resistance F12 Series have very few moving parts providing long life and service friendly design Heavy duty roller bearings provide indirect drive capability

85

500

1000

1500

2000

2500

Speed (rpm)
F12-80 F12-110

F12 Series Overall Efficiency


100

Motor - 250 bar (3625 PSI)

Overall Efficiency - %

95

90

85

80

500

1000

1500

2000

2500

3000

Speed (rpm)
F11-150 F11-250

50

Piston Pumps (Mobile)


F12 Large Frame Fixed Displacement Bent-Axis Pumps
Shown: F12-60 with 2-bolt flange
F E D

F12-60 with 2-bolt flange


F

B C

C2

Shown: F12-80 with 4-Bolt Flange


E D F

C2
G

Shown: F12-80 with 4-Bolt Flange


E D F

Shown: F12-150 (SAE version)


F max E
B C

D
C2

B
B C C2 G

B
H

C1 G
G

Dimensions, inch (mm)


Series 2-BOLT F12-30 F12-40 F12-60 Series 4-BOLT F12-30 F12-40 F12-60 F12-80 A 746 (1895) 776 (1971) 843 (2141) A 746 (1895) 776 (1971) 843 (2141) 945 (2400) B 031 (79) 031 (79) 031 (79) B 031 (79) 031 (79) 031 (79) 031 (79) 31 (79) 31 (79) C 15 (381) 189 (480) 189 (480) C C2 13 (330) 189 (480) 189 (480) C2 D

H max

D 232 (589) 256 (640) 276 (701) E

E 394 (1001) 433 (1100) 492 (1250) F

F 480 (1219) 528 (1341) 567 (1440) G

G 693 (1760) 846 (2149) 846 (2149) H

150 (381) 130 (330) 232 (589) 394 (1001) 480 (1219) 465 (1181) 465 (1181) 189 (480) 189 (480) 256 (650) 433 (1100) 528 (1341) 583 (1481) 567 (1440) 189 (480) 189 (480) 276 (701) 492 (1250) 567 (1440) 583 (1481) 567 (1440) 213 (541) 213 (541) 305 (775) 531 (1349) 610 (1549) 610 (1549) 610 (1549) 264 (671) 263 (668) 335 (851) 571 (1450) 669 (1699) 803 (2040) 787 (1999) 263 (668) 263 (668) 465 (1181) 677 (1720) 874 (2220) 748 (1900) 835 (2121) 323 (820) 263 (668) 465 (1181) 776 (1971) 913 (2319) 787 (1999) 787 (1999)

F12-110 1039 (2639) 031 (79) F12-150 1398 (3551) F12-250 1555 (3950)

51

F12 Model Ordering Code


F12
Bent Axis Pump

Piston Pumps
000
Version Number1 Standard Option

Function Main Ports

Mounting Flange Shaft Seal

Shaft

Displacement in3/rev (cm3/rev)

Speed Sensor Option

Code 30 40 60 80 90 110 125 150 250 Code R L Code S U F


3

Displacement in3/rev (cm3/rev) 183 in /rev (300 cc/r) 244 in3/rev (400 cc/r) 365 in3/rev (598 cc/r) 491 in3/rev (804 cc/r) 568 in3/rev (930 cc/r) 672 in3/rev (1101 cc/r) 763 in3/rev (1250 cc/r) 915 in /rev (1500 cc/r)
3

Code N V

Shaft Seal NBR*, Low Pressure FPM**, High Pressure, High Temperature

30 x x

40 x x

60 x x

80 x x

90 110 125 150 250 x x x x x x x x

* NBR - Nitrile rubber ** FPM - Fluorocarbon rubber Code S U Function T K F D 40 x x 60 x x 80 x x 90 110 125 150 250 x x x x x x Code 0 P Shaft SAE Spline (std) SAE Spline (opt) SAE Key (std) Metric Key SAE Spline Spline, DIN 5480 Speed Sensor Option Standard Prepared for Speed Sensor 30 x 40 x 60 x 80 x x x 90 110 125 150 250 x x x x x x x

1477 in3/rev (2420 cc/r)

x x


x x x

Pump, CW Rotation Pump, CCW Rotation Main Ports SAE Flange SAE, UN Threads SAE 6000 PSI Flange Mounting Flange SAE 4 bolt SAE 2 bolt SAE D 4 bolt 30 x x


30 x x


40 x x


60 x x


80 x x

90 110 125 150 250 x x x x x x x x x x

Code S T X

30 x x

40 x x

60 x x

80 x

90 110 125 150 250 x x x x x x x

NOTE: ISO and cartidge mounting also available See catalog on CD

x: Available
1

: Not Available

Assigned by factory for special versions Order speed sensor kit# 3785190 separately

52

Piston Pumps (Mobile)


F1 Fixed Displacement Bent-Axis Truck Pumps
F1 fixed displacement piston pumps are widely used on truck applications with operating pressure up to 5000 PSI (350 BAR). These lightweight, efficient pumps were designed specifically for truck applications including cargo cranes, hook loaders, forest cranes and concrete mixer trucks.
(For T1 pump version see catalog on CD)

Pump Performance Data


Model Series F01-25 F01-41 F01-51 F01-61 F01-81 F01-101 Displacement in3/rev (cc/rev) 156 (256) 250 (409) 312 (511) 363 (595) 498 (816) 628 (1029) Maximum Outlet Pressure PSI (BAR) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Rated Drive Speed RPM 2600 2400 2200 2200 2000 1800 Theoretical Max Maximum Input Flow GPM (LPM) Horsepower HP (KW) 16 (606) 24 (908) 28 (1060) 35 (1325) 43 (1628) 49 (1855) 39 (291) 57 (425) 67 (500) 84 (626) 102 (761) 115 (858)

Markets
Forestry Construction Mining Material Handling Recycling Military Off-Highway Trucks, Fan Drives Dump Trucks Truck Mounted Cranes, Lift Trucks

Applications
Knuckle Boom Loader, Cranes, Mowers / Cutters

Vaccum Truck Systems, Refuse Trucks - ASL, Rear Loaders Fan Drives

53

Piston Pumps (Mobile)


F1 Fixed Displacement Bent-Axis Truck Pumps

SAE spline shaft shown

Benefits/Features
Higher self-priming speeds Operating pressures to 5801.51 PSI (400 BAR) New frame sizes to meet market requirements Higher overall efficiency Increased reliability Reduced noise level Smaller installation dimensions Pump rotation easily changed

54

Piston Pumps (Mobile)


F1 Fixed Displacement Bent-Axis Truck Pumps

G D E

RO TA T

IO

N L

Parker

Pump rotation easily changed

Dimensions, inch (mm)


Series F1-25 F1-41 F1-51 F1-61 F1-81 F1-101 A 807 (205) B 027 (7) C 217 (55) D 510 (1295) E 222 (565) F 425 (108) G 429 (109)

1020 (259)

027 (7)

217 (55)

567 (144)

248 (63)

465 (118)

433 (110)

55

F1 Model Ordering Code


ISO/DIN mounting:

Piston Pumps
Ordering No. 378 1024 378 1025 378 1040 378 1041 378 1050 378 1051 378 1060 378 1061 378 1080 378 1081 378 1100 378 1101

F1
Fixed Displacenent Bent Axis Pump

Frame Size Code 25 41 51 61 81 101 Frame Size

Rotation

Ordering Code F1-25-R F1-25-L F1-41-R F1-41-L Code L R Rotation Left Hand (CCW) Right Hand (CW) F1-51-R F1-51-L F1-61-R F1-61-L F1-81-R F1-81-L F1-101-R F1-101-L

156 in3/rev (256 cc/rev) 250 in3/rev (409 cc/rev) 312 in3/rev (511 cc/rev) 366 in3/rev (595 cc/rev) 498 in3/rev (816 cc/rev) 628 in3/rev (1029 cc/rev)

NOTES: 1 Pressure port on 25, 41, 51 and 61 sizes is 3/4" Pressure port on 81 and 101 sizes is 1" 2 Suction fitting must be ordered separately 3. Use seven digit number when placing order.

See CD for SAE mount versions


Suction Fitting Cap Screw Clamp

Suction Fittings

A suction fitting consists of a straight, 45, 90 or 135 suction fitting, 2 clamps, 2 cap screws and an O-ring

Straight Suction Fittings


Ordering no. 378 0635 378 0636 378 0637 378 0973 378 0974 A in. (mm) 0 (0) 067" (17) 098" (25) 067" (17) 067" (17) B in. (mm) 335" (85) 535" (136) 571" (145) 535" (136) 535" (136) C dia. in. (mm) 15" (38) 20" (50) 25" (63) 177" (45) 177" (48)
A C A C
O-Ring

Straight fitting

20

45 Suction Fittings
Ordering no. 378 1234 1) 378 0633 378 0634 378 1062 378 0975 378 0965
1)

A in. (mm) 236" (60) 236" (60) 264" (67) 295" (75) 264" (67) 264" (67) 264" (67)

B in. (mm) 409" (104) 409" (104) 433" (110) 461" (117) 433" (110) 433" (110) 433" (110)

C dia. in. (mm) 125" (32) 15" (38) 2 " (50) 25" (63) 157" (40) 177" (45) 189" (48)
A

45 fitting
C

20

378 0364 2)

1) Suitable for frame size F1-25 2) Suitable for pump sizes F1-41,-51,-61,-81 and -110

90 Suction Fittings
Ordering no. 378 0978 378 0979 378 0976 378 0977 378 1980 A in. (mm) 496" (126) 531" (135) 531" (135) 531" (135) 579" (147) B in. (mm) 327" (83) 327" (83) 327" (83) 327" (83) 406" (103) C dia. in. (mm) 15" (38) 2" (50) 177"(45) 189" (48) 25" (63)

90 fitting

20

135 Suction Fitting


Ordering no. 378 1867 A in. (mm) 654" (166) B in. (mm) 287" (73) C dia. in. (mm) 2" (50)

135 fitting 56

20

Piston Pumps (Mobile)


F2 Twin Flow Bent-Axis Truck Pumps
F2 Fixed Displacement Piston Pumps are widely used on truck applications with operating pressure up to 5000 PSI (350 BAR). These twin flow pumps provide two independent output flows with a single inlet in a compact package. These lightweight, efficient pumps were designed specifically for truck applications including cargo cranes, hook loaders, forest cranes and concrete mixer trucks.

Pump Performance Data


Model Series F2-42/42 F2-55/28 F2-53/53 F2-70/35 F2-70/70 *Port A/Port B ** Port A + Port B Max. Displacement in3/rev (cc/rev) 262/250 (43/41)* 336/171 (55/28)* 330/317 (54/52)* 421/220 (69/36)* 415/415 (68/68)* Outlet Pressure PSI (BAR) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 4350 (300) Drive Speed RPM 1800 1800 1800 1800 1650 Flow** @ 1800 RPM Port A Port B GPM (LPM) GPM (LPM) 204 (772) 261 (986) 255 (965) 327 (1238) 323 (1223) 195 (738) 133 (503) 248 (939) 172 (651) 323 (1223) Max. Input Power HP (KW) 118 (880) 118 (880) 147 (1098) 147 (1098) 150 (1119)

Markets
Forestry Construction Mining Material Handling Recycling Military Off-Highway Trucks, Fan Drives Dump Trucks Truck Mounted Cranes, Lift Trucks

Applications
Knuckle Boom Loader, Cranes, Mowers / Cutters

Vaccum Truck Systems, Refuse Trucks - ASL, Rear Loaders Fan Drives

57

Piston Pumps (Mobile)


F2 Twin Flow Bent-Axis Truck Pumps

Benefits/Features
Two separate outlet flows with a single inlet Operating pressures to 6000 PSI (413.7 BAR) intermittent Higher overall efficiency Increased reliability Low noise level Compact package that only weighs 42 lbs (19.1 kg).

58

Piston Pumps (Mobile)


F2 Twin Flow Bent-Axis Truck Pumps

4.3 (109) 8.4 (213) 2.9 (74)

Left Hand Rotation


3.2 (81) 2.0 (51) Inlet (suction) port
B

Outlet (pressure) port (BSP 3/4")

10.9 (277)

2.2 (55)

0.33 (8.5) 5.8 (148)

Spline B8x32x36 (DIN 5462)

59

F2 Model Ordering Code


F2
Twin Flow Bent Axis Pump

Piston Pumps
Ordering No. 378 4042 378 4043 378 4128 378 4129 378 1453 378 1454 378 1470 378 1471 378 4070 378 4071

Frame Size Frame Size 42/42 55/28 53/53 70/35 70/70

Rotation Code L R Rotation Left Hand (CCW) Right Hand (CW)

Ordering Code F2-42/42-R F2-42/42-L F2-55/28-R F2-55/28-L F2-53/53-R F2-53/53-L F2-70/35-R F2-70/35-L F2-70/70-R F2-70/70-L

NOTES: 1 Pressure port on 25, 41, 51 and 61 sizes is 3/4" Pressure port on 81 and 101 sizes is 1" 2 Suction fitting must be ordered separately 3. Use seven digit number when placing order.

Suction Fittings

Suction Fitting Cap Screw Clamp

A suction fitting consists of a straight, 45, 90 or 135 suction fitting, 2 clamps, 2 cap screws and an O-ring

Straight Suction Fittings


Ordering no. 378 0635 378 0636 378 0637 378 0973 378 0974 A in. (mm) 0 (0) 067" (17) 098" (25) 067" (17) 067" (17) B in. (mm) 335" (85) 535" (136) 571" (145) 535" (136) 535" (136) C dia. in. (mm) 15" (38) 20" (50) 25" (63) 177" (45) 177" (48)
A C C A
O-Ring

Straight fitting

20

45 Suction Fittings
Ordering no. 378 1234 1) 378 0633 378 0634 378 1062 378 0975 378 0965
1)

A in. (mm) 236" (60) 236" (60) 264" (67) 295" (75) 264" (67) 264" (67) 264" (67)

B in. (mm) 409" (104) 409" (104) 433" (110) 461" (117) 433" (110) 433" (110) 433" (110)

C dia. in. (mm) 125" (32) 15" (38) 2 " (50) 25" (63) 157" (40) 177" (45) 189" (48)
A

45 fitting
C

20

378 0364 2)

1) Suitable for frame size F1-25 2) Suitable for pump sizes F1-41,-51,-61,-81 and -110

90 Suction Fittings
Ordering no. 378 0978 378 0979 378 0976 378 0977 378 1980 A in. (mm) 496" (126) 531" (135) 531" (135) 531" (135) 579" (147) B in. (mm) 327" (83) 327" (83) 327" (83) 327" (83) 406" (103) C dia. in. (mm) 15" (38) 2" (50) 177"(45) 189" (48) 25" (63)

90 fitting

20

135 Suction Fitting


Ordering no. 378 1867 A in. (mm) 654" (166) B in. (mm) 287" (73) C dia. in. (mm) 2" (50)

135 fitting

20

60

Gold Cup Hydrostatic Transmissions


(B) Gold Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions

Page 63-74

Hydrostatic Transmissions (Mobile & Industrial)


Gold Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions
The Gold Cup Hydrostatic Transmission pumps are variable displacement piston pumps of an unparalleled rugged design. Rated to 5000 PSI (350 BAR) continuous pressure and continuous duty, the Gold Cup design has the unique feature of an internal servo/ replenish and the ability to utilize system over pressure to directly control the stroking chambers. This affords the fastest and most stable control strategy available. All internal wear surfaces are hydrostatically balanced and/or hydraulically linked allowing for a long and serviceable life. The Gold Cup pump also has the ability to run in many open circuit applications and also has digital (Flow/Pressure) capability for the most difficult of control requirements. The Gold Cup Series has been designed to operate in a wide range of industries needing closed-loop control, high pressure, high power density such as Blast Hole Drill Rigs, Shredding, Cranes, Mining, Hydraulic Test Stands, Pulp and Paper, Military, Marine, and Power Generation.

The controls are completely modular in design and can be configured to meet most any system requirements with standard factory options.

Pump Performance Data


Model Series P6 P7 P8 P11 P14 P24 P30 Displacement in3/rev (cc/rev) 600 (983) 725 (1188) 800 (1311) 1100 (1803) 1400 (2295) 2460 (4032) 3060 (5015) Max Continuous Pressure PSI (BAR) 5000 (3448) 5000 (3448) 5000 (3448) 5000 (3448) 5000 (3448) 5000 (3448)* 5000 (3448)* Max Intermittent Pressure** PSI (BAR) 6000 (420) 6000 (420) 5000 (350) 6000 (420) 6000 (420) 5000 (350)* 5000 (350)* Rated Drive Speed RPM 3000 3000 2100 2400 2400 2100*** 1800 Flow @ 1800 RPM GPM(LPM) 47 (1779) 57 (2158) 62 (2347) 86 (3255) 109 (4126) 192 (7268) 238 (9009) Input Horsepower @ Max Continuous Pressure & 1800 RPM & 40cSt Petroleum Oil HP (KW) 153 (1141) 183 (1365) 145 (1081) 275 (2051) 348 (2595) 626 (4668) 765 (5705)

* Variable speed. Higher servo pressure may be required. ** 10% of operating time, not exceeding 6 successive seconds. *** On HF-1 fluids, 1800 RPM max on HF-0 fluids.

Motor Performance Data


Model Displacement Series in3/rev (cc/rev) Max Continuous Pressure PSI (BAR) Max Intermittent Pressure** PSI (BAR) Max Rated Shaft Speed RPM Input Flow Required for 1800 RPM GPM (LPM) 47 (1779) 57 (2158) 62 (2347) 86 (3255) 109 (4126) 192 (7268) 238 (9009) Output Torque at Maximum Rated Pressure lbin (kgcm) 4327 (3042) 5348 (3760) 4216 (2964) 8146 (5728) 10,410 (7319) 18,320 (12880) 23,000 (16171) Output Horsepower @ Max Continuous Pressure and 1800 rpm and 40cSt Petroleum Oil HP (KW) 123 (917) 153 (1141) 120 (895) 232 (1730) 297 (2215) 523 (3900) 657 (48989)

M6 600 (983) 5000 (3448) 6000 (420) 3000 M7 725 (1188) 5000 (3448) 6000 (420) 3000 M8 800 (1311) 5000 (3448) 5000 (350) 2100 M11 1100 (1803) 5000 (3448) 6000 (420) 2400 M14 1400 (2295) 5000 (3448) 6000 (420) 2400 M24 2460 (4032) 5000 (3448)* 5000 (350)* 2100*** M30 3060 (5015) 5000 (3448)* 5000 (350)* 1800 * Variable speed. Higher servo pressure may be required. ** 10% of operating time, not exceeding 6 successive seconds. *** On HF-1 fluids, 1800 RPM max on HF-0 fluids.

63

Hydrostatic Transmissions (Mobile & Industrial)


Gold Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions

Benefits/Features
Quick change valve block - easy to service or replace Modular controls - easy to service and change Versatile controls - can be located on either side of pump or motor for maximum freedom of design Dampened low inertia rocker cam - more stable, quieter and faster than other designs Exclusive zero-backlash rotary servo design - lifetime accuracy Field adjustable compensator override - easily adjusted without removing from machinery Precision barrel bearing, a distinctive Parker Denison Hydraulics feature for over 30 years - permits high speeds, high pressure and provides long life Ring style replenishing checks fastest operation with no sliding poppets or parts and low pressure drop Hot oil shuttle available - fast, reliable operation Auxiliary pump can be changed without disassembling the transmission Standard SAE keyed or splined drive shafts are available High pressure mechanical shaft seals can be changed without disassembling the transmission (excluding the P24 and P30 models). Double lip seals are also available One piece stroking vane/cam means no lost motion, zero backlash, better control, and no linkages to wear out Stroking vane seals are pressure loaded for longer life Standard compensator vent ports allow for a wide variety of controls (See applications manual) Rocker cam displacement indicator helps troubleshoot the system Modulated servo pressure saves power Standard Code 62 SAE split flange connections Fastest compensator response: Gives maximum of 10% pressure overshoot at rated conditions (guaranteed times under all conditions faster response times possible depending upon application) Variable motors with reverse available for multiple speed ranges or constant power Certification Approvals: ATEX, ABS, MIL-P-17869A, and MIL-S-901-C Grade A

Markets
Marine Oil & Gas Mining Power Gen Material Handling Drill Rigs, Top Drives, Bucket Reclaimers Turbine Start

Applications
Deck Cranes, Constant Tension Winches, Steering Gear, Fin Stablizers, Nitrogen Pumpers, Frac Trucks, Cementers, Coil Tubing

Mixers, Dewatering, Conveyor Drives, Shredders

64

Hydrostatic Transmissions (Mobile & Industrial)


Gold Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions
Gold Cup Performance Data
Gold Cup Shaft Input Power - 1800 RPM
600 (804)

Gold Cup Overall Efficiency - 1800 RPM


95

40C Inlet Oil Temperature ISO VG 32 Fluid Max. Displacement

40C Inlet Oil Temperature ISO VG 32 Fluid Max. Displacement

Shaft Input Power - kw (HP)

400 (536) 300 (402) 200 (268) 100 (134) 0 50 (725)

Overall Efficiency %
100 (1450) 150 (2176) 200 (2901) 250 (3626) 300 (4350)

500 (670)

90

85

80

75

Pump Outlet Pressure - bar (PSI)


P8P P11P P14P

350 (5075)

70

50 (725)

P6P

P7P

P24P

P30P

Pump Outlet Pressure - bar (PSI)


P7P P8P

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4350)

350 (5075)

P6P

Gold Cup Pump Outlet Flow - 1800 RPM


Pump Outlet Flow - lpm (GPM)
1000 (264) 900 (238) 800 (211) 700 (185) 600 (159) 500 (132) 400 (106) 300 (79) 200 (53) 100 (26) 0 0

Gold Cup Overall Efficiency - 1800 RPM


95

40C Inlet Oil Temperature ISO VG 32 Fluid Max. Displacement

40C Inlet Oil Temperature ISO VG 32 Fluid Max. Displacement

Overall Efficiency %
50 (725) 100 (1450) 150 (2176) 200 (2901) 250 (3626) 300 (4350)

90

85

80

75

Pump Outlet Pressure - bar (PSI)


P7P P8P P11P P14P

350 (5075)

70

50 (725)

P6P

P24P

P30P

Pump Outlet Pressure - bar (PSI)


P14P

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4350)

350 (5075)

P11P

Gold Cup Overall Efficiency - 1800 RPM


95 90

40C Inlet Oil Temperature ISO VG 32 Fluid Max. Displacement

Overall Efficiency %

85 80 75 70 65 60

50 (725)

Pump Outlet Pressure - bar (PSI)


P30P

100 (1450)

150 (2176)

200 (2901)

250 (3626)

300 (4350)

350 (5075)

P24P

65

Hydrostatic Transmissions (Mobile & Industrial)


Gold Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions
Gold Cup Controls
The spring centered rotary servo input, pressure compensator override, and displacement indicator are all standard features on all Gold Cup package pumps. Spring centering is used in addition to the rotary servo input control to provide a positive return-toneutral action. It includes an adjustable neutral position to allow fine tuning the neutral position, or offsetting the neutral position. Variable motors have spring offset rotary servo inputs, cylinder controls and displacement indicators as standard features. Additional, optional controls are available which increase the utility of the Gold Cup components. These controls include the following:
"A" Side Control Mounting

"B" Side Control Mounting

Primary Controls
Rotary servo The rotary servo is a mechanically actuated shaft that proportionally positions the pump to the desired flow (all variable units) and direction A lever is commonly attached and an external mechanical signal of 19 is applied to overcome the spring centering mechanism (20 in lbs spring force) and is directly proportional to the resulting cam angle of the pump The hydraulic stroker is used on both pump and motors This control positions the rotary servo proportionally to externally controlled pilot pressure The electrohydraulic stroker is used on both pumps and motors It provides an input rotary servo position proportional to input current It is used primarily with remote electrical controllers It may be used with programmed controllers as long as the system does not require rapid response The electrohydraulic servo provides a control for electrohydraulic systems requiring rapid response and precise control RVDT feedback or Potentiometer feedback are available options The three position cylinder control permits a pump to be offset to an adjustable displacement on either side of center by supplying a pilot signal to the appropriate control port With no signal the pump returns to an adjustable zero stroke position The two position pump cylinder control permits a pump to be offset to an adjustable displacement on one side of center by supplying a pilot signal to the appropriate control port With no signal the pump returns to an adjustable zero position The two position motor cylinder control permits a motor to be stroked to a reduced displacement by supplying a pilot signal to the appropriate control port With no signal the motor returns to an adjustable maximum stroke position By mounting an electric directional control valve on the cylinder control, the pump or motor stroke may be controlled by energizing the appropriate solenoid valve, eliminating the need for separate mounting and fluid connections to the control valve

Hydraulic stroker Electrohydraulic stroker Electrohydraulic servo 3-Position cylinder control 2-Position cylinder control

Electrohydraulic cylinder control

Options and Secondary Controls


Adjustable displacement stops Manual screw adjustment Automatic brake and neutral bypass control Adjustable stops are available as an option They provide an adjustment to limit the maximum displacement of the rotary servo input between zero and full displacementon both sides of center A manual screw adjustment is available to provide an easily set pump displacement which will not move during operation It is used when pump displacement will be adjusted infrequently The automatic brake and neutral bypass control is used to actuate a spring set pressure released parking brake and open a small channel between the system ports when the rotary servo input and rocker cam are coincident in the neutral position If one or the other device is not in the neutral position, the control will not shift into the brake and bypass mode This control is used on track drives, swing drives, hoist drives and any other system where creeping is intolerable In some cases this control may be used for the bypass function alone The torque limit override control is used for limiting the input shaft torque At constant speeds it serves as a horsepower limit override This control maintains a relationship between displacement and pressure which results in a limitation of the input torque

Torque limit override

66

Hydrostatic Transmissions (Mobile & Industrial)


Gold Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions
A

M6 M7 M8

M*F Shown

115.8 (4.56) "M*G" ONLY

L2 L1
Mounting L1 L2

SAE127-2 (SAE-C) SAE 152-4 (SAE-D)

1119 (2842) 1159 (2943)

1106 (2809) 1146 (2911)

L1

4.50 (114.3)

4.50 (114.3)

5.27 (133.9) 3.87 TYP. (98.3)

P6 P7 P8

3.70 (93.9)

P*P Shown

L2

Mounting

L1

L2

SAE127-2 (SAE-C) SAE 152-4 (SAE-D)

1551 (3939) 1685 (4279)

1370 (3480) 1504 (3821)

67

Hydrostatic Transmissions (Mobile & Industrial)


Gold Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions
Size 6, 7 and 8 Flange and Shaft Detail
2.97 2.91 75.4 73.9 2.97 2.91 75.4 73.9

0.49 (12.4) 0.25 MAX. (6.4)

4.50 (114.3)

6.000 5.998 DIA. 152.40 152.35

2.76 DIA. (70.1)

4.50 (114.3)

Shaft Code 04 SAE D Keyed


Code 02, 07 09, 10 S1 2.23 (56.6) 2.15 (54.6) 3.36 (85.3) 3.28 (83.3)
2.23 2.15 56.6 54.6

Shaft Code 05 SAE D Spline

4.44 (112.8)

8.88 (225.6)

VIEW A-A
FOR SAE 152-4 ("D" 4-BOLT)
2.23 2.15 56.6 54.6

(
S1

)
0.49 (12.4) 0.24 (6.1)

)
8.50 DIA. (215.9)

4.22 (107.2) 4.50 DIA. (114.3) 5.000 4.998 DIA. 127.00 126.95

See Note 1 See Note 2

4.22 (107.2)

Shaft Codes 02, 07, 09, 10 SAE C Keyed

Shaft Codes 03 or 08 SAE C Spline

VIEW A-A
FOR SAE 127-2 ("C" 2-BOLT)

NOTES 1 Spline length for M*F, M*G, M*H, M*V, P*S, P*X, P*D, P*P, P*V & P*F. 2 Spline length for M*R, M*L, M*M, M*N, P*L, P*R.

68

Hydrostatic Transmissions (Mobile & Industrial)


Gold Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions
16.51 (419.4) 6.12 (155.4) 15.28 (388.0)

1.12 (28.4)

M11 M14
M*F Shown

4.82 (122.4)

4.82 (122.4)

19.83 (503.8)

5.17 (131.3)

5.83 (148.0)

P11 P14
P*P Shown
5.17 (131.3) 4.91 (124.7) 5.33 (135.3)

B
18.31 (465.2)

5.56 (141.3)

5.56 (141.3)

Size 11 and 14 Flange and Shaft Detail


10.34 (262.6) 5.17 (131.3) 2.97 2.90 75.4 73.7 .625 .605 15.88 15.37 .36 (9.1) 2.97 2.90 75.4 73.7 2.97 2.90 75.4 73.7

* For Codes 09 and 10, add 1" (25.4mm) to shaft length.

5.17 (131.3)

6.500 6.498 DIA. 165.1 165.0

10.34 (262.6)

See Note 1

See Note 2

VIEW B-B

Shaft Code 03 or 08 SAE E Spline

Shaft Code 02, 07, 09*, 10* SAE E Keyed

NOTES 1 Spline length for M*F, M*G, M*H, M*V, P*S, P*X, P*D, P*P, P*V & P*F. 2 Spline length for M*R, M*L, M*M, M*N, P*L, P*R.

69

Hydrostatic Transmissions (Mobile & Industrial)


Gold Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions
L1 L2
C
7.86 (199.6) 7.86 (199.6)

7.31 (185.7)

M24 M30
M*F Shown

6.18 (157.0)

6.18 (157.0) 7.31 (185.7)

Model

L1

L2

M24F
L2 L1

2161 (5488) 2261 (5742)

2046 (5196) 2146 (5450)

M30F

6.18 (157.0)
B A

P*P Shown

7.31 (185.7)

7.15 (181.6)

Model

L1

Size 24 and 30 Flange and Shaft Detail


NOTES 3.47 1 Spline length for M*F, M*G, M*H, M*V, P*S, P*X, P*D, P*P, P*V & P*F. 3.41 2 Spline length for M*R, M*L, M*M, M*N, P*L, P*R. ( 88.1) 86.6
0.61 (15.5)

P24P P30P
3.47 3.41 88.1 86.6

2370 (6021) 2470 (6275)

( )

S1

Code

02, 07

7.000 6.998 DIA. 177.80 177.75

See Note 1

See Note 2

09, 10

VIEW C-C

Shaft Code 03 or 08 SAE F Spline

Shaft Code 02, 07, 09, 10 SAE F Keyed

70

P24 P30

6.18 (157.0)

4.75 (120.7)

7.15 (181.6)

7.31 (185.7)

6.08 (154.4)

L2

1808 (4594) 1908 (4847)

S1

347 (881) 341 (866) 535 (1359) 529 (1344)

Hydrostatic Transmissions
P
Pump Displacement Type Efficiency Shaft Rotation

GOLD CUP Pump Model Ordering Code

Seals

Design 2

Primary Controls

Secondary Controls

Control Location

Code 6 7 8 11 14 24 30 Code F M P X S R L V D Code H Omit Code 2 3

Displacement 600 in3/rev (98 cc/rev) 725 in3/rev (119 cc/rev) 800 in3/rev (131 cc/rev) 110 in /rev (180 cc/rev)
3

Code R L Code 1 4 5 Code Omit 10 2A 2H EPR 1, 3 Clockwise

Rotation Counterclockwise Seals Nitrile (Buna-N) Fluorocarbon Primary Controls None (Fixed Displacement only) Screw Adjustment (Spring Offset to Maximum Displacement) Cylinder Control w/Adjustable Maximum Volume Stops Cylinder Control 3-Position (Spring Control with Zero Adjustment) Cylinder Control 2-Position Electrohydraulic w/Adjustable Maximum Volume Stop (Spring Offset to Maximum Displacement) 1 Cylinder Control 3-Position (Spring Centered) Electrohydraulic 1 Rotary Servo Spring Centered Rotary Servo Spring Centered w/ Adjustable Maximum Volume Stops Rotary Servo Spring Centered w/ Automatic Brake Control Rotary Servo Spring centered w/ Adjustable Maximum Volume Stops & Automatic Brake Control Electrohydraulic Stroker w/Adjustable Maximum Volume Stops 1 Electrhydraulic Stroker w/Adjustable Maximum Volume Stops & Automatic Brake Control 1 High IQ with 10 GPM Servo Valve & Volume Indicator 1 High IQ with 10 GPM Servovalve & 4A (Rotary Servo) Control 1 High IQ with DF+ Valve & Volume Indicator 1 High IQ with DF+ Valve & 4A (Rotary Servo) Control 1 Hydraulic Stroker w/Adjustable Maximum Volume Stops Hydraulic Stroker w/Adjustable Maximum Volume Stops & Automatic Brake Control Electrohydraulic Stroker w/Adjustable Maximum Volume Stops 1 Electrohydraulic Stroker w/Adjustable Maximum Volume Stops & Automatic Brake Control 1 Electro-hydraulic stroker w/ adjustable maximum volume stops

Code Omit 2 4 6 7 8 Code Omit A B

Secondary Controls None (Fixed Displacement only) Volume Indicator Torque Limiter & Volume Indicator Cam Position Feedback Potentiometer 1 Cam Position Feedback RVDT (AC)1 Cam Position Feedback R VDT (DC) 1 Control Location None (Fixed Displacement only) Primary Control on Port A Side Primary Control on Port B Side

140 in3/rev (229 cc/rev) 246 in /rev (403 cc/rev)


3

306 in3/rev (501 cc/rev) Type Fixed Displacement, Open/Closed Circuit Fixed Displacement with High Torque Thru-Drive, Open/Closed Circuit Variable Displacement, Closed Circuit Variable Displacement with Medium Torque Thru-Drive, Closed Circuit Variable Displacement with Medium Torque Thru-Drive & Shuttle Package, Closed Circuit Variable Displacement with High Torque Thru-Drive, Closed Circuit Variable Displacement with High Torque Thru-Drive & Shuttle Package, Closed Circuit Variable Displacement, Open Circuit (P6, 7, 8, 11 & 14 only) Variable Displacement, Open & Closed Circuit (P6, 7 & 8 only) Efficiency High Efficiency (P24 only) Standard Efficiency Shaft Keyed SAE Mechanical Shaft Seal (Single Lip Seal on P6, 7, 8F/M) Splined SAE Mechanical Shaft Seal (Single Lip Seal on P6, 7, 8F/M) Keyed SAE-D (Mounting & Shaft) Mechanical Shaft Seal (P6, 7 & 8 only, Single Lip Seal on Fixed Displacement Pumps) Splined SAE-D (Mounting & Shaft) Mechanical Shaft Seal (P6, 7 & 8 only, Single Lip Seal on Fixed Displacement Pumps) Keyed SAE Double Lip Shaft Seal Splined SAE Double Lip Shaft Seal Keyed (long) SAE Double Lip Shaft Seal Keyed (long) SAE Mechanical Shaft Seal

2M

1 Not ATEX approved 2 Assigned by manufacturer 3 Not available when using 5A or 5C primary controls Pump will be unpainted unless otherwise specified

2N 40 4A 4B 4C 5A 5C 7D 7F 7J 7K 8A 8C 9A 9C 9D

= Omit if not required

-5 7 8 9 10

71

GOLD CUP Pump Model Ordering Code

Hydrostatic Transmissions

Control & Displacement Features Control Code 00 01 02 2M* & 2N* 03 04 05 06 07 5** 00 01 00 7** 01 00 01 8** 02 03 04 9** All Other Pump 00 01 00 Code 00 Control & Displacement Features

Internal Pump

External Drive Code 0 1 2 3 4 5 6 X

External Mounting

Special Modifications Internal Pump

CETOP3, NG6 Valve, 110AC/60Hz with Hirschmann Connector 1 CETOP3, NG6 Valve, 12VDC with Hirschmann Connector 1 CETOP3, NG6 Valve, 240VAC/50Hz with Hirschmann Connector 1 CETOP3, NG6 Valve, 110VAC/60Hz, Wiring Box 1 CETOP3, NG6 Valve, 12VDC, Wiring Box 1 CETOP3 (D03, NG6) Interface, No Valve 1 CETOP3, NG6 Valve, 24VDC with Hirschmann Connector 1 CETOP3, NG6 Valve, 110VAC/50Hz with Hirschmann Connector 1 With Deadband 1 Without Deadband 1 Without Manual Override Shutoff 1 With Manual Override Shutoff (required for F & K primary options) 75-350 PSI (5-24 Bar) 75-435 PSI (5-30 Bar) 100-380 PSI (7-26 Bar) 150-400 PSI (10-28 Bar) 75-250 PSI (5-17 Bar) 24VDC 12VDC None 1 Reduced Displacement Standard Cam (19) P6 with 17 Cam 53 in3/rev (87cc/rev) P7 with 17 Cam 64 in3/rec (105 cc/rev) P8 with 17 Cam 71 in3/rev (116 cc/rev) P11 with 17 Cam 97 in3/rev (160 cc/rev) P14 with 17 Cam 125 in3/rev (205 cc/rev) P24 with 17 Cam 220 in3/rev (360 cc/rev) P30 with 17 Cam 272 in3/rev (446 cc/rev) P6 with 15 Cam 46 in3/rev (76 cc/rev) P7 with 15 Cam 56 in3/rev (92 cc/rev) P8 with 15 Cam 62 in3/rev (102 cc/rev) P11 with 15 Cam 85 in3/rev (140 cc/rev) P14 with 15 Cam 109 in3/rev (179 cc/rev) P6 with 13 Cam 40 in3/rev (66 cc/rev) P7 with 13 Cam 48 in3/rev (79 cc/rev) P8 with 13 Cam 53 in3/rev (88 cc/rev)
1

107 in3/rev (175 cc/rev) P6, 7, 8P/S/X/V/D & P11, 14V only** 214 in3/rev (35 cc/rev) P11, 14P/S/X only** 281 in3/rev (46 ccrev) P24, 30P/S/X only (standard)** 161 in3/rev (264 cc/rev) P24, 30P/S/X only (auxiliary external replenishing flow required) 105 in3/rev (172 cc/rev) P24, 30P/S/X only (auxiliary external replenishing flow required) 356 in3/rev (583 cc/rev) P24, 30P/S/X only 484 in3/rev (793 cc/rev) P24, 30P/S/X only 542 in3/rev (888 cc/rev) P24, 30P/S/X only 610 in3/rev (1000 cc/rev) P24, 30P/S/X only No Internal Pump (standard on P*R/L/F/M)

** Omit code if no external drive is required Code Omit M A B C D E F Code Omit 0 1 2 Code Omit NP EX M2 None No Paint 1 ATEX APPROVED PUMP (May contain additional modifications Contact tech support) Other Special Modification (example: bronze caged barrel bearing for low viscosity fluids, tandem pumps, etc) 1 None 1 Blanking plate for P6, 7, 8, 11, 14S/X only SAE-A (SAE 82-2) P6, 7, 8, 11, 14S/X/R/L/M only SAE-B (SAE 101-2) P6, 7, 8, 11, 14, 24, 30/S/X/R/L/M SAE-B (SAE 101-4) P11, 14, 24, 30R/L/M SAE-C (SAE 127-2) P6, 7, 8, 11, 14, 24, 30R/L/M & P24, 30S/X SAE-C (SAE 127-4) P11, 14, 24, 30R/L/M SAE-D (SAE 152-4) P11, 14, 24, 30R/L/M only SAE-E (SAE 165-4) P11, 14, 24, 30R/L/M only SAE-F (SAE 177-4) P24, 30R/L/M only External Mounting No External Drive Required No External Pump Mounted External Pump Mounted (must be separately specified) Requires Special Modification -M2 1 ATEX Externally Mounted Pump Special Modifications External Drive

10 P**F & P**M 20

30

= Omit if not required

72

Hydrostatic Transmissions
M
Motor Displacement Type Efficiency Shaft

GOLD CUP Motor Model Ordering Code


N
Bi-directional Rotation Code 1 4 5 Code Omit 2A Type Fixed Displacement Fixed Displacement with Shuttle Package Fixed Displacement with Thru-Drive Fixed Displacement with Thru-Drive & Shuttle Package Variable Displacement Variable Displacement with Shuttle Package Variable Displacement with Thru-Drive Variable Displacement with Thru-Drive & Shuttle Package Efficiency High Efficiency (M24 only) Standard Efficiency Shaft Keyed SAE Mechanical Shaft Seal (Single Lip Seal on M6, 7, 8F/G/M/N) Splined SAE Mechanical Shaft Seal (Single Lip Seal on M6, 7, 8F/G/M/N) Keyed SAE-D (Mounting & Shaft) Mechanical Shaft Seal (M6, 7 & 8 only, Single Lip Seal on Fixed Displacement Motors) Splined SAE-D (Mounting & Shaft) Mechanical Shaft Seal (P6, 7 & 8 only, Single Lip Seal on Fixed Displacement Motors) Keyed SAE Double Lip Shaft Seal Splined SAE Double Lip Shaft Seal Keyed (long) SAE Double Lip Shaft Seal Keyed (long) SAE Mechanical Shaft Seal W X Z Code Omit A B 5A 8A 9A Code Omit 0 3 5 6 7 8 U Code 2 3 4 Volume Indicator Reverse Compensator (spring offset to maximum displacement) + Volume Indicator Reverse Compensator (spring offset to minimum displacement) + Volume Indicator Cam Position Feedback Potentiometer1 Cam Position Feedback RVDT (AC)1 Cam Position Feedback RVDT (DC)1 Reverse Compensator (3) + Cam Position Feedback Potentiometer (6)1 Reverse Compensator (3) + Cam Position Feedback RVDT (8)1 Reverse Compensator (5) + Cam Position Feedback Potentiometer (6)1 Reverse Compensator (5) + Cam Position Feedback RVDT (8)1 Control Location None (Fixed Displacement only) Primary Control on Port A Side Primary Control on Port B Side 2M Nitrile (Buna-N) EPR 3 Fluorocarbon Primary Controls None (Fixed Displacement only) Cylinder Control w/Adjustable Maximum Volume Stops Cylinder Control 2-Position Electrohydraulic w/Adjustable Maximum Volume Stop (Spring Offset to Maximum Displacement)1 Electrohydraulic Stroker w/ Adjustable Maximum Volume Stops1 Hydraulic Stroker w/Adjustable Maximum Volume Stops Electrohydraulic Stroker w/ Adjustable Maximum Volume Stops1 Secondary Controls None (Fixed Displacement only) Seals Design 2 Primary Controls Seals Secondary Controls Control Location

Code 6 7 8 11 14 24 30 Code F G M N V H R L Code H Omit 600 in3/rev (98cc/rev)

Displacement 725 in3/rev (119 cc/rev) 800 in3/rev (131 cc/rev) 110 in3/rev (180 cc/rev) 140 in3/rev (229 cc/rev) 246 in /rev (403 cc/rev)
3

306 in3/rev (501 cc/rev)

5 7 8 9 10

1 Not ATEX approved 2 Assigned by manufacturer 3 Not available when using 5A primary control Motor will be unpainted unless otherwise specified

= Omit if not required

73

GOLD CUP Motor Model Ordering Code

Hydrostatic Transmissions

Control & Displacement Features Control Code 0 1 2 2M 3 4 5 6 7 5A 0 1 0 1 0 1 0 Code 0 Control & Displacement Features CETOP3, NG6 Valve, 110AC/60Hz with Hirschmann Connector1 CETOP3, NG6 Valve, 12VDC with Hirschmann Connector1 CETOP3, NG6 Valve, 240VAC/50Hz with Hirschmann Connector1 CETOP3, NG6 Valve, 110VAC/60Hz, Wiring Box1 CETOP3, NG6 Valve, 12VDC, Wiring Box1 CETOP3 (D03, NG6) Interface, No Valve1 CETOP3, NG6 Valve, 24VDC with Hirschmann Connector1 CETOP3, NG6 Valve, 110VAC/50Hz with Hirschmann Connector1 With Deadband1 Without Deadband1

Shuttle Valve External Features Drive Code Omit 0 2 Code Omit A B C D E F M Code 0 1 2 Code Reduced Displacement Omit NP M2 EX None

External Mounting

Special Modifications Shuttle Valve Features

M*F/M/V/R Motors only Without Orifices With Orifices External Drive None (M*F/G/V/H units only) SAE-A (SAE 82-2) M6, 7, 8, 11, 14M/N/R/L only SAE-B (SAE 101-2) M6, 7, 8M/N/R/L SAE-B (SAE 101-2 & 101-4) M11, 14, 24, 30M/N/R/L SAE-C (SAE 127-2) M6, 7, 8M/N/R/L SAE-C (SAE 127-2 & 127-4) M11, 14, 24, 30M/N/R/L SAE-D (SAE 152-4) M11, 14, 24, 30M/N/R/L only SAE-E (SAE 165-4) M11, 14, 24, 30M/N/R/L only SAE-F (SAE 177-4) M24, 30M/N/R/L only Blanking Plate-less Coupling External Mounting No External Motor Mounted External Motor Mounted (must be separately specified) Requires Special Modification -M2 ATEX Externally Mounted Motor Special Modifications No Paint Other Special Modification (example: bronze caged barrel bearing for low viscosity fluids, tandem motors, etc) ATEX APPROVED (May contain additional modifications Contact tech support)

8A

75-250 PSI (5-17 Bar) 250-450 PSI (17-31 Bar) 24VDC1 12VDC1 None

9A All Other Motor

Standard Cam (19) M6 with 17 Cam 53 in3/rev (87cc/rev) M7 with 17 Cam 64 in3/rec (105 cc/rev) M8 with 17 Cam 71 in3/rev (116 cc/rev) M11 with 17 Cam 97 in3/rev (160 cc/rev) M14 with 17 Cam 125 in3/rev (205 cc/rev) M24 with 17 Cam 220 in3/rev (360 cc/rev) M30 with 17 Cam 272 in3/rev (446 cc/rev) M6 with 15 Cam 46 in3/rev (76 cc/rev) M7 with 15 Cam 56 in3/rev (92 cc/rev) M8 with 15 Cam 62 in3/rev (102 cc/rev) M11 with 15 Cam 85 in3/rev (140 cc/rev) M14 with 15 Cam 109 in3/rev (179 cc/rev) M6 with 13 Cam 40 in3/rev (66 cc/rev) M7 with 13 Cam 48 in3/rev (79 cc/rev) M8 with 13 Cam 53 in3/rev (88 cc/rev)

1 M*F M*G M*M M*N 2

= Omit if not required

74

Vane Pumps
(M) = Mobile (I) = Industrial (B) = Mobile & Industrial (B) (B) (B) (B) (B) (B) (B) SDV 10/20 Medium Pressure Single Vane Pumps SDV2010 Medium Pressure Double Vane Pumps T7A Series High Performance Small Displacement Single Vane Pumps T6 Series Single, Double & Triple High Performance Vane Pumps T7 Series Single, Double & Triple High Performance Vane Pumps T67 Series High Performance Vane Pumps T6H/T7H Hybrid Technology Variable Piston Fixed Vane Pumps

Page

77-80 81-84 85-86 87-90 91-93 94-96 97-100

Vane Pumps (Mobile & Industrial)


SDV 10/20 Medium Pressure Single Vane Pumps
The SDV Series are a fixed displacement vane pump ideal for low to mid-pressure applications. Their compact design and low noise features make them well suited for filter carts, test stands and remote pilot pumps.

Pump Performance Data


Single Pump Model Series** SDV10-1*1 SDV10-1*2 SDV10-1*3 SDV10-1*4 SDV10-1*5 SDV10-1*6 SDV10-1*7 Displacement in3/rev (cc/rev) 020 (33) 040 (66) 060 (98) 080 (131) 100 (164) 119 (195) 139 (228) Max. Outlet Pressure PSI (BAR) 2500 (175) 2500 (175) 2500 (175) 2500 (175) 2500 (175) 2200 (150) 2000 (140) Max. Outlet Pressure PSI (BAR) 2500 (175) 2500 (175) 2500 (175) 2500 (175) 2500 (175) 2200 (150) 2000 (140) Rated Drive Flow @ 1800 rpm Input Horsepower @ 1800 rpm Speed and 0 PSI and 2500 PSI RPM GPM (LPM) HP (KW) 1800 1800 1800 1800 1800 1800 1800 Rated Drive Speed RPM 1800 1800 1800 1800 1800 1800 1800 16 (61) 31 (117) 47 (178) 62 (235) 78 (295) 93 (352) 108 (409) 289 (22) 483 (36) 765 (57) 987 (74) 1277 (95) 1511 (113) 1801 (134)

Single Pump Model Series** SDV20-1*6 SDV20-1*7 SDV20-1*8 SDV20-1*9 SDV20-1*11 SDV20-1*12 SDV20-1*13

Displacement in3/rev (cc/rev) 119 (195) 139 (228) 162 (265) 181 (297) 222 (364) 238 (390) 259 (424)

Flow @ 0 PSI* GPM (LPM) 927 (351) 1084 (410) 1260 (477) 1412 (535) 1731 (655) 1855 (702) 2016 (763)

Input Horsepower @ 2500 PSI* HP (KW) 145 (108) 164 (122) 195 (145) 221 (165) 286 (213) 304 (227) 332 (248)

* @ 1800 RPM. ** Based on combinations of SDV20 pumps.

77

Vane Pumps (Mobile & Industrial)


SDV 10/20 Medium Pressure Single Vane Pumps
Benefits/Features
Two compact frame sizes available Low noise 100% tested Easy to convert or repair

SDV10

SDV20

Pump Performance Data


SDV10 Size 1 2 3 4 5 6 7 SDV20 Size 6 7 8 9 11 12 13 Output Flow (l/min) 0 BAR 61 119 178 236 295 352 410 150 BAR 39 99 156 202 988 310 368 Output Flow (GPM) 0 PSI 16 31 47 62 78 93 108 2000 PSI 10 26 41 53 261 82 97 Input Power (kW) 7 BAR 01 021 031 041 051 061 071 150 BAR 144 36 57 74 952 113 1343 Input Power (HP) 80 PSI 014 028 041 055 069 082 096 2500 PSI 193 483 765 987 1277 1511 1801

Output Flow (l/min) 0 BAR 351 410 477 535 655 702 763 150 BAR 315 357 423 481 621 660 721

Output Flow (GPM) 0 PSI 927 1084 1260 1412 1731 1855 2016 2000 PSI 832 942 1118 1270 1641 1744 1905

Input Power (kW) 7 BAR 05 07 07 08 10 11 12 150 BAR 108 122 145 165 213 227 248

Input Power (HP) 80 PSI 07 09 10 11 14 15 12 2500 PSI 145 164 195 221 286 304 332

78

Vane Pumps (Mobile & Industrial)


SDV 10/20 Medium Pressure Single Vane Pumps
C A D

SDV10

F G B

H E

A B

C
D

SDV20

Dimensions, inch (mm)


Ring Size SDV10 SDV20 A* 455 (1156) to 500 (1270) 493 (1252) to 552 (1402) B 0250 (635) 0173 (44) C Max 175 (444) 266 (676) D 300 (762) 438 (1112) E 512 (13000) 512 (13000) F 247 (627) 260 (660) G 150 (381) 219 (556) H 375 (952) 375 (952)

* Depending on ring size

79

SDV 10/20 Model Ordering Code


SDV
Light Duty Vane Pump Series

Vane Pumps

1
Mounting 2 Bolt Flange, 3-1/4 Pilot SAE A Series Inlet Port Ring Size Outlet Port

Shaft Position of Outlet Port Rotation

Code 10 20

Size 10, 1-7 GPM (38-265 LPM) Size 20, 6-13 GPM (227-492 LPM) Inlet Port Connection SDV10 1" NPTF Thread 1 5/16"-12 UNF-2B Thread G1" (BSPP) SDV20 1 1/4" NPTF Thread 1 5/8"-12 UNF-2B Thread G1" (BSPP) Ring Size *** 1 GPM (38 LPM) 2 GPM (76 LPM) 3 GPM (114 LPM) 4 GPM (151 LPM) 5 GPM (189 LPM) 6 GPM (227 LPM) 7 GPM (265 LPM) 8 GPM (303 LPM) 9 GPM (341 LPM) 10 GPM (379 LPM) 11 GPM (416 LPM) 12 GPM (454 LPM) 13 GPM (492 LPM)

Code P S B Code 1 11 38 62*

Outlet Port Connection SDV10 1/2" NPTF Thread 3/4"-16 UNF-2B Thread G1/2" (BSPP) SDV20 3/4" NPTF Thread 1 1/16"-12 UNF-2B Thread G3/4" (BSPP) Shaft Straight Keyed Splined 11 Teeth - 3/4" OD Splined

Code P S B Code 1* 2* 3* 4* 5* 6 7 8** 9** 10** 11** 12** 13**

* SDV20 only Code A B C D Opposite Inlet Port 90 CCW from Inlet In Line with Inlet 90 CW from Inlet Position of Outlet Port*

* Viewed from cover end of pump Code Omit L CW CCW Rotation*

* As viewed from shaft end

* SDV10 only ** SDV20 only *** Delivery at 1200 RPM and 100 PSI

80

Vane Pumps (Mobile & Industrial)


SDV2010 Medium Pressure Double Vane Pumps
The SDV Series are a fixed displacement vane pump, ideal for low to mid pressure applications. The double pump provides the flexibility of two different displacements within one housing. The compact design and low noise features make them well suited for filter carts, test stands, remote pilot pumps, and for hi/lo circuits.

Pump Performance Data


Series SDV2010 Displacement* in3/rev (cc/rev) Max continuous pressure PSI (BAR) Max speed RPM -7 16 - 28 (261 - 456) 2500 (175) 1800 -8 18 - 30 (298 - 493) 2500 (175) 1800 -9 20 - 32 (330 - 525) 2500 (175) 1800 -11 24 - 36 (397 - 592) 2500 (175) 1800 -12 26 - 38 (423 - 618) 2200 (150) 1800 -13 28 - 40 (457 - 652) 2200 (150) 1800

* Range calculated by adding displacement for SDV20 to range of displacements for SDV10. Series SDV2020 Displacement* in3/rev (cc/rev) Max continuous pressure PSI (BAR) Max speed RPM -7 26 - 32 (423 - 525) 2500 (175) 1800 -8 28 - 34 (460 - 562) 2500 (175) 1800 -9 30 - 36 (492 - 594) 2500 (175) 1800 -11 34 - 44 (559 - 728) 2500 (175) 1800 -12 36 - 46 (585 - 754) 2200 (150) 1800 -13 38 - 48 (619 - 788) 2200 (150) 1800

* Range calculated by adding displacement for SDV20 (shaft end) to range of SDV20 (cover end). Displacement Max. Outlet Range* Pressure in3/rev (cc/rev) PSI (BAR) 1028 - 1795 2500 SDV2010-1F7 (261 - 456) (175) 1173 - 1941 2500 SDV2010-1F8 (298 - 493) (175) 1299 - 2067 2500 SDV2010-1F9 (330 - 525) (175) 1563 - 2331 2500 SDV2010-1F11 (397 - 592) (175) 1665 - 2433 2200 SDV2010-1F12 (423 - 618) (150) 1799 - 2567 2200 SDV2010-1F13 (457 - 652) (150) *Based on combinations with SDV10 sizes. **Complete model code required, see catalog on CD. Double Pump Model Series** Displacement Max. Outlet Range* Pressure 3 in /rev (cc/rev) PSI (BAR) 1665 - 2567 2500 SDV2020-1F7 (423 - 652) (175) 1811 - 2713 2500 SDV2020-1F8 (460 - 689) (175) 1937 - 2839 2500 SDV2020-1F9 (492 - 721) (175) 2201 - 3102 2500 SDV2020-1F11 (559 - 788) (175) 2303 - 3205 2200 SDV2020-1F12 (585 - 814) (150) 2437 - 3339 2200 SDV2020-1F13 (619 - 848) (150) *Based on combinations of SDV20 pumps. **Complete model code required, see catalog on CD. Double Pump Model Series** Rated Drive Speed RPM 1800 1800 1800 1800 1800 1800 Flow @ 0 PSI @ 1800 RPM GPM (LPM) 124 - 216 (469 - 818) 142 - 234 (538 - 886) 157 - 249 (594 - 943) 189 - 281 (715 - 1064) 202 - 294 (1775 - 3096) 218 - 310 (825 - 1773) Input Horsepower @2500 PSI @1800 RPM HP (KW) 193 - 344 (144 - 257) 224 - 375 (167 - 280) 250 - 401 (186 - 299) 315 - 466 (235 - 347) 333 - 484 (248 - 361) 361 - 512 (269 - 382)

Rated Drive Speed RPM 1800 1800 1800 1800 1800 1800

Flow @ 0 PSI @ 1800 RPM GPM (LPM) 201 - 250 (761 - 946) 219 - 267 (829 - 1011) 234 - 282 (886 - 1067) 266 - 375 (1007 - 1420) 278 - 387 (1052 - 1465) 294 - 403 (1113 - 1526)

Input Horsepower @2500 PSI @1800 RPM HP (KW) 309 - 385 (230 - 287) 340 - 416 (254 - 310) 366 - 442 (273 - 330) 431 - 618 (321 - 461) 449 - 636 (335 - 474) 477 - 664 (356 - 495)

81

Vane Pumps (Mobile & Industrial)


SDV2010 Medium Pressure Double Vane Pumps
Benefits/Features
Two compact frame sizes available Low noise 100% tested Easy to convert or repair

SDV2010

SDV2020

Pump Performance Data


SDV10 Size 1 2 3 4 5 6 7 SDV20 Size 6 7 8 9 11 12 13 Output Flow (l/min) 0 BAR 5.9 11.9 17.6 23.6 29.5 35.1 41.0 150 BAR 3.9 9.9 15.6 20.2 26.1 30.9 36.8 Output Flow (GPM) 0 PSI 1.6 3.1 4.7 6.2 7.8 9.3 10.8 2000 PSI 1.0 2.6 4.1 5.3 26.1 8.2 9.7 Input Power (kW) 7 BAR 0.10 0.21 0.31 0.41 0.51 0.61 0.71 150 BAR 1.44 3.60 5.70 7.36 9.52 11.27 13.43 Input Power (HP) 80 PSI 0.14 0.28 0.41 0.55 0.69 0.82 0.96 2500 PSI 1.93 4.83 7.65 9.87 12.77 15.11 18.01

Output Flow (l/min) 0 BAR 351 410 477 535 655 702 763 150 BAR 315 356 423 481 621 660 721

Output Flow (GPM) 0 PSI 927 1084 1260 1412 1731 1855 2016 2000 PSI 832 942 1118 1270 1641 1744 1905

Input Power (kW) 7 BAR 050 060 070 080 100 110 120 150 BAR 1080 1220 1450 1650 2130 2260 2470

Input Power (HP) 80 PSI 07 09 10 11 14 15 12 2500 PSI 145 164 195 221 286 304 332

82

Vane Pumps (Mobile & Industrial)


SDV2010 Medium Pressure Double Vane Pumps
A C B F J

SDV2010
G D E C B F H

SDV2020
D E

G A J

Dimensions, inch (mm)


Ring Size SDV2010 SDV2020 A* 839 (2131) to 917 (2329) 841 (2136) to 919 (2334) B 037 (94) 037 (94) C 231 (587) 231 (587) D 219 (556) 219 (556) E 438 (1112) 438 (1112) F 300 (762) 294 (747) G 219 (556) 219 (556) H 888 (1748) 888 (1748) J 475 (1207) 475 (1207)

* Depending on ring size

83

SDV 2010 Model Ordering Code


SDV
Light Duty Vane Pump Series

Vane Pumps

Mounting Inlet Port Shaft End No. 1 Outlet Cover End No. 2 Outlet Pump Port (Shaft Pump Port (Cover Ring Size End) Ring Size End) Shaft Position of Outlet Ports

Rotation

Code 2010 2020 Code 1 6*

Series SDV20/SDV10 Combination SDV20/SDV20 Combination Mounting 2 Bolt Flange, 4" Pilot (Standard) 2 Bolt Flange, 3" Pilot

Code 1* 2* 3* 4* 5* 6 7 8** 9** 11**

Ring Size *** 1 GPM (38 LPM) 2 GPM (76 LPM) 3 GPM (114 LPM) 4 GPM (151 LPM) 5 GPM (189 LPM) 6 GPM (227 LPM) 7 GPM (265 LPM) 8 GPM (303 LPM) 9 GPM (341 LPM) 11 GPM (416 LPM)

Code A B C D

Position of Outlet Port No. 1* Opposite Inlet Port 90 CCW from Inlet In Line with Inlet 90 CW from Inlet

* Viewed from cover end of pump Code A B C D Position of Outlet Port No. 2* 135 CCW from Inlet 45 CCW from Inlet 45 CW from Inlet 135 CW from Inlet

* Available on SDV2020 only Inlet Port Connection SDV2010 4 Bolt Flange 1" Dia SDV2020 4 Bolt Flange 2" Dia

Code F Code 7 8 9 11 12 13

Shaft End Pump Ring Size* 7 GPM (265 LPM) 8 GPM (303 LPM) 9 GPM (341 LPM) 11 GPM (416 LPM) 12 GPM (454 LPM) 13 GPM (492 LPM)

* SDV2010 only ** SDV2020 only *** Delivery at 1200 RPM and 100 PSI (69 BAR) Cover End Pump Outlet Port SDV2010 3/4"-16 UNF-2B Thread G1/2" (BSPP) SDV2020 1 1/16"-12 UNF-2B Thread G3/4" (BSPP) Shaft Straight Keyed Splined

* Viewed from cover end of pump Code Rotation* CW CCW

Code S B Code 1 11

Omit L

* As viewed from shaft end

* Delivery at 1200 RPM and 100 PSI Code S B Shaft End Pump Outlet Port 1 1/16"-12 UNF-2B Thread G3/4" BSPP

84

Vane Pumps (Mobile & Industrial)


T7A Series High Performance Small Displacement Single Vane Pumps
The T Series fixed displacement vane pump is the highest performance pump of its kind. The balanced design and double lip vane technology are key features in providing a contamination resistant and reliable pump. High pressure capabilities, extremely low noise, precise flow repeatability, and its ability for fast pressure cycle changes make it the perfect fluid source for industrial applications.

Pump Performance Data


Series T7AS B06 B10 B11 B13 B17 B20 B22 B25 Displacement in3/rev (cc/rev) 037 (6) 061 (10) 067 (11) 079 (13) 104 (17) 122 (20) 134 (22) 153 (25) Displacement in3/rev (cc/rev) 159 (26) 171 (28) 1,83 (30) 195 (32) 207 (34) 220 (36) 244 (40) Max. Outlet Pressure PSI (BAR) 4000 (280) 4000 (280) 4000 (280) 4000 (280) 4000 (280) 4000 (280) 4000 (280) 3500 (240) Max. Outlet Pressure PSI (BAR) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4000 (280) 4000 (280) 4000 (280) Rated Drive Speed RPM 3600 3600 3600 3600 3600 3600 3600 3000 Rated Drive Speed RPM 3600 3600 3600 3600 3000 3000 3000 Flow @ 1800 RPM GPM (LPM) 273 (103) 468 (177) 522 (198) 608 (230) 818 (310) 943 (357) 1068 (404) 1184 (448) Flow @ 1800 RPM GPM (LPM) 1239 (469) 1332 (504) 1426 (540) 1512 (572) 1613 (611) 1714 (649) 1901 (720)

Series T7ASW B26 B28 B30 B32 B34 B36 B40

Markets
Material Handling Recycling Lift Trucks Compactors
A

Applications

Benefits/Features
Fully balanced pump 12-vane design for low pressure ripple Cam ring construction allows easy displacement changes Wide range of shafts SAE flanges or threaded ports Port orientations every 90
(THREADED PORT CONNECTION)

1.73 4.33 0.25


3.75 DIA

2.68

2.38
C.G.

3.250/3.248

4.33

Series T7AS T7ASW

A 545 633

Weight, lb (kg) 209 (95) 239 (113)

5.13

85

T7A Model Ordering Code


T
High Performance Vane Pump Series

Vane Pumps

Mounting w/Connection Variable

Displacement Shaft Rotation Porting

A
Design Level Seal Class

Modifications (Code entered at factory)

Code 7AS 7ASW 7AS Codes B06 B10 B11 B13 B17 B20 B22 B25

Series Standard Mounting SAE A 2-Bolt Flange (J744) SAE A 2-Bolt Flange (J744) Higher Displacement

Code

Porting Combinations*
S

00 Displacement in3/rev (cc/rev) 035 (573) 060 (983) 067 (1098) 078 (1278) 105 (1721) 121 (1983) 137 (2245) 152 (2491) Shaft Type 7AS Keyed (non SAE) 075 Dia Splined 16/32 (SAE B) 13 Teeth Splined 16/32 (non SAE) 9 Teeth 7ASW Keyed (non SAE) 075 Dia Splined 16/32 (SAE B) 13 Teeth Splined 16/32 (non SAE) 11 Teeth Rotation* CW CCW 00 7ASW Codes B26 B28 B30 B32 B34 B36 B40 Displacement, in3/rev (cc/rev) 159 (2606) 171 (2802) 183 (2999) 194 (3179) 207 (3392) 220 (3605) 244 (3998)
S S
P

01

02

03
* P = Pressure Port; S = Suction Port

Code 1 3 4 Code R L

Code 1 5 S1 (Buna N) S5 (fluorocarbon)*

Seal Class

*Not available for 7ASW Mounting w/Connection Variables Code Type 4-Bolt SAE Flange (J518) UNC Thread SAE Thread NPTF Thread 7AS Suction Pressure Port (S) Port (P) Type 4-Bolt SAE Flange (J518) UNC Thread SAE Thread SAE & NPTF Threads 7ASW Suction Pressure Port (S) Port (P)

*As viewed from shaft end

1" SAE

v" SAE

11v" SAE 3v" SAE

02 03

11zn" 15zn" (SAE16) (SAE 12) 11v" NPTF


3

15," 11zn" (SAE20) (SAE 12) 11v" NPTF 11zn" (SAE 12)

v" NPTF

86

Vane Pumps (Mobile & Industrial)


T6 Series Single, Double & Triple High Performance Vane Pumps
The T Series fixed displacement vane pump is the highest performance pump of its kind. The balanced design and double lip vane technology are key features in providing a contamination resistant and reliable pump. High pressure and speed capabilities, extremely low noise, and a cartridge designed to prime in cold weather conditions, make this fluid power source ideal for mobile applications.

Pump Performance Data


Single Pump Model Series T6CM T6DM T6EM Displacement in3/rev (cc/rev)* 066 - 610 (108 - 100) 290 - 964 (475 - 158) 807 - 1385 (1323 - 227) Max. Outlet Pressure** PSI (BAR) 4000 (280) 3500 (240) 3500 (240) Rated Drive Speed** RPM 2800 2500 2200 Flow @1800 RPM and 0 PSI* GPM (LPM) 514 - 4756 (193 - 1800) 2264 - 7514 (857 - 2844) 6292 - 10800 (2382 - 4088) Input Horsepower @ 1800 RPM and 2000 PSI* HP (KW) 845 - 5795 (63 - 432) 2931 - 9058 (219 - 675) 7844 - 12909 (585 - 963)

* Available range based on various combinations of displacements **Lower for larger displacements. See catalog.

Markets
Industrial Construction Recycling Injection Molding Wheel Loader, ADTs, Fan Drives

Applications
Shredders, Balers, Compactors, Vaccum Truck Systems, Refuse Trucks - ASL, Rear Loaders

87

Vane Pumps (Mobile & Industrial)


T6 Series Single, Double & Triple High Performance Vane Pumps
Benefits/Features
Mobile cartridge designed for cold start-ups Wide range of displacements Low noise provides machine operator safety Speed range from 400 to 2800 rpm Large flow within a small envelope Double shaft seal option allows direct mounting to gearboxes

Pump Performance Data


T6CM/CP Size** Output Flow (lpm) @

1800 RPM 136 250 326 416 556 609 768 992 1090 1207 1370 1541 1741

Output Flow (GPM) @ 1800

RPM 36 66 86 110 147 161 203 262 288 319 362 407 460

Input Power (kW) 7 BAR

Input Power (HP)

0 BAR

140 BAR 280 BAR

0 PSI

2000 PSI 3500 PSI

140 BAR 280 BAR 100 PSI 2000 PSI 3500 PSI

B03 B05 B06 B08 B10 B12 B14 B17 B20 B22 B25 B28 B31

193 310 382 473 613 666 829 1048 1147 1264 1427 1598 1800

212 284 375 515 568 731 950 1037 1166 1329 1510 1715

51 82 101 125 162 176 219 277 303 334 377 4223 4756

56 75 99 136 150 193 251 274 308 351 399 453

16 17 18 19 21 21 23 25 27 28 30 32 34

63 89 107 128 160 172 209 260 283 309 347 386 433

146 176 213 268 290 355 444 484 531 596 572 642

21 23 24 25 28 28 31 34 36 38 40 43 46

85 120 143 171 214 231 280 348 379 415 465 517 580

196 236 285 360 389 476 595 649 712 799 767 861

** T6CP not available in sizes B03 through B12


Output Flow (lpm) @ Output Flow (GPM) @ 1800

T6DM Size

1800 RPM
140 BAR

RPM 204 255 292 356 405 446 506 550 625 671 730

Input Power (kW) 7 BAR 140 BAR 300 BAR

Input Power (HP) 100 PSI 2000 PSI 3500 PSI

0 BAR

300 BAR

0 PSI

2000 PSI

3500 PSI

B14 B17 B20 B24 B28 B31 B35 B38 B42 B45 B50

855 1048 1189 1431 1616 1768 1998 2165 2449 2623 2843

772 965 1105 1347 1533 1688 1915 2082 2366 2540 2763

712 905 1045 1287 1469 1624 1855 2021 2305 2479 2718

226 277 314 378 427 467 528 572 647 693 751

188 239 276 340 388 429 490 534 609 655 718

30 32 34 37 39 40 43 45 48 50 53

219 262 295 350 393 428 481 520 585 624 676

368 444 501 599 673 735 827 894 1008 1078 1003

40 43 45 49 52 54 58 60 65 67 71

293 352 395 470 527 574 645 697 784 837 906

493 596 672 803 902 986 1109 1199 1352 1446 1345

Note: See catalog on CD for additional cartridge options and specific displacement operating parameters.

88

Vane Pumps (Mobile & Industrial)


T6 Series Single, Double & Triple High Performance Vane Pumps
Pump Performance Data
T6EM Size Output Flow (lpm) @

1800 RPM
140 BAR

Output Flow (GPM) @ 1800

RPM 604 652 728 758 910 989

Input Power (kW) 7 BAR 140 BAR 300 BAR

Input Power (HP) 100 PSI 2000 PSI 3500 PSI

0 BAR

240 BAR

0 PSI

2000 PSI

3500 PSI

042 045 050 052 062 066 072

2381 2562 2854 2967 3539 3838 4088

2286 2468 2755 2869 3444 3743 3993

2214 2396 2687 2801 3372 3671 3921

629 677 754 784 935 1014 1080

585 633 710 740 891 970 1036

60 51 54 56 63 66 69

585 612 679 705 837 905 963

849 1055 1172 1218 1449 1569 1669

81 69 73 75 84 88 92

784 821 910 945 1122 1214 1291

1138 1415 1572 1633 1943 2104 2238

1055

Note: See catalog on CD for additional cartridge options and specific displacement operating parameters.
A B D

T6CM

T6DM

Dimensions, inch (mm)


Series T6CM T6DM T6EM A 6.36 (161.5) 7.28 (184.9) 8.87 (225.3) B 2.81 (71.4) 3.29 (83.6) 3.58 (90.9) D 6.87 (174.5) 8.36 (212.3) 8.39 (213.1) E 3.00 (76.2) 3.25 (82.6) 3.88 (98.6) F 5.31 (134.9) 6.17 (156.7) 7.38 (187.5) Weight, lb (kg) 34.0 (15.5) 53.0 (24.0) 95.4 (43.4)

T6EM

89

T6 Model Ordering Code


T
High Performance Vane Pump Series

Vane Pumps

Delivery

Shaft Rotation Porting

Design Level Seal Class Modifications (Code entered at factory)

Code 6CM 6CP 6DM 6DP 6EM 6EP

Series Description Size C, Mobile 1 Shaft Seal Size C, Mobile 2 Shaft Seals Size D, Mobile 1 Shaft Seal Size D, Mobile 2 Shaft Seals Size E, Mobile 1 Shaft Seal Size E, Mobile 2 Shaft Seals

Code R L CW CCW

Rotation*

* As viewed from shaft end Code Porting Combinations*


P

00 Delivery 6C Codes B03* B05* B06* B08* B10* B12* B14 B17 B20 B22 B25 B28 B31 Delivery** GPM (LPM) 342 (129) 545 (206) 676 (256) 836 (316) 1081 (409) 1176 (445) 1458 (552) 1848 (700) 2023 (766) 2228 (483) 2514 (952) 2790 (1056) 3170 (1200) 6D Codes B14 B17 B20 B24 B28 B31 B35 B38 B42 B45 B50 Delivery ** GPM (LPM) 1509 (571) 1845 (698) 2093 (792) 2520 (954) 2844 (1077) 3116 (1180) 3519 (1332) 3814 (1444) 4312 (1632) 4619 (1749) 5009 (1896) 6E Codes 042 045 050 052 062 066 072 Delivery** GPM (LPM) 4194 (1588) 4615 (1747) 5025 (1902) 5225 (1978) 6236 (2361) 6762 (2560) 7200 (2725) 03
S P P S P

01

02

* P = Pressure Port; S = Suction Port Code A B C T6CP only T6EM, T6EP All Others Seal Class S1 (Buna N) S4 (EPDM) S5 (fluorocarbon) Design Level

* Not available on T6CP ** At 0 PSI (0 BAR) and 1200 RPM Shaft Type 6CM Keyed SAE B Keyed (non SAE) Splined SAE B Splined SAE BB Keyed (non SAE) Splined SAE C 6CP 6DM, 6DP Keyed SAE C Keyed (non SAE) Splined*** Splined (non SAE) Splined SAE J718c 6EM, 6EP Keyed SAE CC Keyed (non SAE) Splined*** Splined SAE CC Splined SAE J718c

Code 1 2 3 4 T

Code 1 4 5

Pumps are also available in thru-drive version. See Catalog on CD.

* SAE C for 6*M, non SAE for 6*P = Not Available

90

Vane Pumps (Mobile & Industrial)


T7 Series Single, Double & Triple High Performance Vane Pumps
The high performance T Series fixed displacement vane pumps have been specially designed to provide high flows within a small envelope. The balanced design and double lip vane technology are key features in providing a contamination resistant and reliable pump. High pressure and speed capabilities, extremely low noise, and a cartridge designed to prime in cold weather conditions, make this fluid power source ideal for Mobile applications.

Pump Performance Data


Double Pump Model Series T6CCM T6DCM T6ECM T6EDM Displacement in3/rev (cc/rev)* 132 - 1220 (216 - 200) 356 - 1574 (583 - 258) 873 - 1995 (1431 - 327) 1097 - 2349 (1797 - 385) Max. Outlet Pressure** PSI (BAR) 4000 (280) 4000 (280) 4000 (280) 3500 (240) Rated Drive Speed RPM 2800 2500 2200 2200 Flow @1800 RPM and 0 PSI* GPM (LPM) 103 - 951 (390 - 3600) 278 - 1227 (1052 - 4645) 681 - 1556 (2578 - 5890) 855 - 1831 (1476 - 6931) Input Horsepower @ 1800 RPM and 2000 PSI* HP (KW) 169 - 1159 (126 - 864) 378 - 1485 (282 - 1107) 869 - 1870 (648 - 1394) 1077 - 2197 (803 - 1638)

* Available range based on various combinations of displacements **Lower for larger displacements. See catalog.

Markets
Industrial Construction Recycling Injection Molding Wheel Loader, Fan Drives

Applications
Shredders, Balers, Compactors, Vaccum Truck Systems, Refuse Trucks - ASL, Rear Loaders

T Series Double

Benefits/Features
Low noise SAE or ISO standards One-piece shaft (no internal torque limitations) One inlet 32 porting orientations available Wide displacement possibility High power to weight ratio Wide range of options for shafts, threads and pilots Mobile cartridge design for cold start conditions

91

Vane Pumps (Mobile & Industrial)


T7 Series Single, Double & Triple High Performance Vane Pumps

E G

C.G.

Dimensions, inch (mm)


Series T6CCM T6DCM T6ECM T6EDM A 1046 (2657) 1126 (2860) 1306 (3317) 1422 (3612) B max 281(714) 329 (836) 358 (909) 358 (909) D 687 (1745) 836 (2123) 839 (2131) 839 (2131) E 331 (841) 350 (889) 403 (1024) 403 (1024) F 288 (732) 292 (742) 350 (889) 350 (889) Weight, kg (lb) 573 (260) 807 (367) 1210 (550) 1455 (661)

92

Vane Pumps
T
High Performance Vane Pump Size Shaft Seal

T7 Model Ordering Code

Severe Duty Shaft Delivery (P1)

Delivery (P2)

Shaft Rotation

00
Standard Porting Combination1 Design Level Seal Class

Mounting w/Connection Variables (T6CC only) Modifications (Code entered at factory)

Size Code 6CC 6DC 6EC 6ED 2 Code M P Code Omit W* Standard Severe Duty Shaft Seal Mobile 1 Seal Mobile 2 Seals Severe Duty 3 4 5 6 T Splined SAE B Splined SAE BB 1 Code 6CCM Keyed (non SAE)

Shaft (See catalog on CD for severe duty options) 6CCP 6DCM Keyed SAE C Keyed (non SAE) Splined (non SAE) Splined SAE BB Splined SAE C Splined (non SAE) Splined (non SAE) 6DCP 6ECP, 6EDP 6ECM 6EDM Keyed SAE CC Keyed (non SAE) Splined SAE C Splined SAE CC

*Available on T6CCM and T6DCM only Delivery (See Table Below) P1 6CC 6DC 6EC 6ED Use Codes for 6C Use Codes for 6D Use Codes for 6E Use Codes for 6E P2 Use Codes for 6C Use Codes for 6C Use Codes for 6C Use Codes for 6D

Splined (non SAE) Splined SAE J718c Rotation* CW CCW Code 1 4 5 S1 (Buna N) S4 (EPDM) S5 (fluorocarbon) Connection Variables Code P1 00 1" 1" 1" 1" 1" 3/4" 1" 3/4" 01 T6CC P2 3" 3" 2 1/2" 2 1/2" S Seal Class

Size

Code R L

*As viewed from shaft end Code D C T6CC only All Others Deslgn Level

Delivery
6C Codes B03 B05 B06 B08 B10 B12 B14 B17 B20 B22 B25 B28 B31 Delivery* GPM (LPM) 342 (129) 545 (206) 676 (256) 836 (316) 1081 (409) 1176 (445) 1458 (552) 1848 (700) 2023 (766) 2228 (483) 2514 (952) 2790 (1056) 3170 (1200) 6D Codes B14 B17 B20 B24 B28 B31 B35 B38 B42 B45 B50 Delivery * GPM (LPM) 1509 (571) 1845 (698) 2093 (792) 2520 (954) 2844 (1077) 3116 (1180) 3519 (1332) 3814 (1444) 4312 (1632) 4619 (1749) 5009 (1896)
1

6E Codes 042 045 050 052 062 066 072

Delivery* GPM (LPM) 4194 (1588) 4615 (1747) 5025 (1902) 5225 (1978) 6236 (2361) 6762 (2560) 7200 (2725)

10 11

P = Pressure Port; S = Suction Port

Many other combinations are available See catalog on CD = Not Available = Omit if not required or to select standard option coded omit

* At 0 PSI (0 BAR) and 1200 RPM

93

Vane Pumps (Mobile & Industrial)


T67 Series High Performance Vane Pumps
The high performance T Series fixed displacement vane pumps have been specially designed to provide high flows within a small envelope. The balanced design and double lip vane technology are key features in providing a contamination resistant and reliable pump. High pressure and speed capabilities, extremely low noise, and a cartridge designed to prime in cold weather conditions, make this fluid power source ideal for mobile applications.

Pump Performance Data


Triple Pump Model Series T6DCCM T6EDCM/S Displacement in3/rev (cc/rev)* 422 - 2185 (691 - 358) 1163 - 2960 (1905 - 485) Max. Outlet Pressure** PSI (BAR) 4000 (280) 4000 (280) Rated Drive Speed RPM 2500 2200 Flow @1800 RPM and 0 PSI* GPM (LPM) 329 - 1703 (1245 - 6447) 907 - 2307 (3433 - 8733) Input Horsepower @ 1800 RPM and 2000 PSI* HP (KW) 462 - 2065 (345 - 1540) 1162 - 2776 (867 - 2070)

* Available range based on various combinations of displacements. ** Lower for larger displacements. See catalog.

Markets
Industrial Construction Recycling Injection Molding Wheel Loader, Fan Drives

Applications
Shredders, Balers, Compactors, Vaccum Truck Systems, Refuse Trucks - ASL, Rear Loaders

Benefits/Features
Low noise SAE or ISO standards One-piece shaft (no internal torque limitations) One inlet 128 porting orientations available Many displacement combinations per stage High power to weight ratio Wide range of options for shafts, threads and pilots Mobile cartridge design for cold start conditions

94

Vane Pumps (Mobile & Industrial)


T67 Series High Performance Vane Pumps
A B

E
C.G.

Dimensions, inch (mm)


Series T6DCC T6EDC A 1590 (4039) 1842 (4679) B max. 353 (897) 394 (1001) D 836 (2123) 1075 (2731) E 500 (1270) F 335 (851) Weight, lb (kg) 1345 (611) 2204 (1002)

95

T67 Model Ordering Code


T
High Performance Vane Pump Size

Vane Pumps

Delivery (P1)

Delivery (P2)

Delivery (P3)

Shaft

00
Rotation Standard Porting Combination1 Code R L CW CCW Design Level Seal Class

Mounting Modifications with (Code entered Connection at factory) Variable

Size Code 6DCCM 6EDCS 6EDCM Note: T6EDCS (SAE pilot) T6EDCM (ISO pilot) Delivery (See Table Below) P1 6DCCM 6EDCS 6EDCM Use Codes for 6D Use Codes for 6E P2 Use Codes for 6C Use Codes for 6D Shaft 6DCCM Keyed (non SAE) Keyed SAE CC Splined SAE C Splined SAE CC Splined (non SAE) Splined SAE D&E 6EDCM Keyed ISO G45N - 3019-2 Keyed SAE D&E Splined SAE D&E 6EDCS P3 Use Codes for 6C Use Codes for 6C

Rotation*

*As viewed from shaft end Code A B Code 1 4 5 Code Code M0 M1 00 01 Code F0* F1* P0** P1** 6DCCM P3 = 1" Metric P3 = 3/4" Metric P3 = 1" UNC P3 = 3/4" UNC 6EDC/S/M P3 = 1" SAE P3 = 3/4" SAE P3 = 1" SAE P3 = 3/4" SAE S1 (Buna N) S4 (EPDM) S5 (fluorocarbon) Connection Variables 6EDC 6DCC Seal Class Design Level

Size

Code 1 2 3 4 6

Delivery
6C Codes B03 B05 B06 B08 B10 B12 B14 B17 B20 B22 B25 B28 B31 Delivery* GPM (LPM) 342 (129) 545 (206) 676 (256) 836 (316) 1081 (409) 1176 (445) 1458 (552) 1848 (700) 2023 (766) 2228 (483) 2514 (952) 2790 (1056) 3170 (1200) 6D Codes B14 B17 B20 B24 B28 B31 B35 B38 B42 B45 B50 Delivery * GPM (LPM) 1509 (571) 1845 (698) 2093 (792) 2520 (954) 2844 (1077) 3116 (1180) 3519 (1332) 3814 (1444) 4312 (1632) 4619 (1749) 5009 (1896) 6E Codes 042 045 050 052 062 066 072 Delivery* GPM (LPM) 4194 (1588) 4615 (1747) 5025 (1902) 5225 (1978) 6236 (2361) 6762 (2560) 7200 (2725)

* F is standard ** P 4 holes for external support

Many other combinations are available See catalog on CD = Not Available

* At 0 PSI (0 BAR) and 1200 RPM

96

Vane Pumps (Mobile & Industrial)


T6H/T7H Hybrid Technology Variable Piston Fixed Vane Pumps
The hybrid pump is a combination of fixed displacement vane pump B, C, D cartridges combined with a variable cartridge of PV20 or PV29 piston pump. The cartridges are driven by a common shaft without coupling in between they have a large common suction port and two or three independent outlet ports: one for the piston, one or two for the vane pump.

Pump Performance Data


Single Pump Model Series*** T6H20B T6H20C T6H29B T6H29C T6H29D T6H29DB Displacement in3/rev (cc/rev)* 035 - 567 (57 - 929) 066 - 872 (108 - 1429) 035 - 683 (57 - 1119) 066 - 988 (108 - 1619) 290 - 1342 (475 - 2199) 3246 - 1647 (532 - 2699) Max. Outlet Pressure** PSI (BAR) 3500 (240) 3500 (240) 3000 (210) 3000 (210) 3000 (210) 3000 (210) Rated Drive Speed** RPM 2600 2600 2400 2400 2400 2400 Flow @1800 RPM and 0 PSI* GPM (LPM) 2376 - 4478 (899 - 1695) 2614 - 6856 (990 - 2595) 3176 - 5278 (1202 - 1998) 3414 - 7656 (1292 - 2898) 5164 - 10414 (1955 - 3942) 5678 - 1517 (2149 - 5742) Input Horsepower @ 1800 RPM and 2000 PSI* HP (KW) 315 - 561 (235 - 418) 36 - 855 (268 - 638) 41 - 655 (306 - 488) 455 - 95 (339 - 708) 663 - 1276 (494 - 952) 703 - 1561 (524 - 1164)

* Piston pump at full displacement. ** Lower for larger displacements; see catalog. *** See catalog on CD for complete information.

Pump Performance Data


Tables show data by cam ring size for van portion only (does not include piston portion). T6H**B Size B02 B03 B04 B05 B06 B07 B08 B10 B12 B15 Output Flow (lpm) @ 1800 RPM 0 BAR 140 BAR 320 BAR 104 176 231 286 357 405 448 572 738 900 88 160 214 270 340 389 432 556 722 884 68 140 194 250 320 369 412 536 702 866 Output Flow (GPM) @ 1800 RPM 0 PSI 276 466 609 756 942 107 1184 1512 195 2378 233 423 566 713 899 1027 1141 1469 1907 2335 18 37 513 66 846 974 1088 1416 1854 2288 Input Power (kW) @ 1800 RPM 06 06 07 08 08 09 09 11 13 15 30 47 59 72 88 99 109 138 176 213 60 96 123 151 186 211 232 294 377 428 Input Power (HP) @ 1800 RPM 2000 PSI 4350 PSI 402 624 79 962 1179 1329 1462 1845 2355 2855 81 1293 1655 2029 25 2826 3115 3948 5058 5735 074 085 094 102 113 12 127 146 172 197

2000 PSI 4350 PSI 7 BAR 140 BAR 320 BAR 100 PSI

*At 280 BAR (4060 PSI)

Markets
Industrial Injection Molding

Applications
97

Vane Pumps (Mobile & Industrial)


T6H/T7H Hybrid Technology Variable Piston Fixed Vane Pumps
Pump Performance Data Benefits/Features
Very compact High pressure ratings Low noise Independent outlets for fixed and variable flow allow simultaneous cycles Internal or external drain Choice of controls Wide range of acceptable fluids

Tables show data by cam ring size for vane portion only (does not include piston portion). T6H**C Output Flow (lpm) @ 1800 RPM Output Flow (GPM) @ 1800 RPM 0 PSI 514 818 1013 1255 1622 1764 2188 2773 3034 3343 3771 4223 4756 Input Power (kW) @ 1800 RPM Input Power (HP) @ 1800 RPM 100 PSI 211 229 24 254 276 284 309 343 358 376 401 427 458 2000 PSI 3500 PSI 845 1338 12 1959 1428 2357 1711 2853 2138 36 2305 3892 2799 4756 3481 5951 3786 6485 4147 7116 4646 799 5174 7673 5795 8606

Size 0 BAR 140 BAR 320 BAR 137 *03 195 *05 310 252 210 *06 383 326 284 *08 475 417 376 *10 614 556 515 *12 668 610 569 *14 828 770 729 *17 1050 992 950 *20 1148 1090 1038 1207 1166 *22 1265 *25 1427 1369 1328 *28 1598 1541 1512 *31 1800 1742 1713 *At 210 BAR (3000 PSI)

2000 PSI 3500 PSI 7 BAR 140 BAR 320 BAR 361 16 63 100 665 556 17 89 146 86 751 18 106 176 1102 993 19 128 213 1469 136 21 159 268 1611 1502 21 172 290 2035 1926 23 209 355 262 2511 26 260 444 2881 2742 27 282 484 319 3081 28 309 531 3618 3509 30 346 596 407 3994 32 386 572 4603 4527 34 432 642

T6H29D

Output Flow (lpm) @ 1800 RPM

Output Flow (GPM) @ 1800 RPM 0 PSI 2264 2768 3139 3781 4266 4675 5279 5721 6468 6929 7514

Input Power (kW) @ 1800 RPM

Input Power (HP) @ 1800 RPM

Size 0 BAR 140 BAR 320 BAR 014 857 774 712 017 1048 965 903 020 1188 1106 1044 024 1431 1349 1287 028 1615 1532 1470 031 1769 1687 1625 035 1998 1916 1854 038 2165 2083 2021 042 2448 2366 2304 045 2623 2540 2478 050 2844 2762 2717 * At 3000 PSI

2000 PSI 3500 PSI 7 BAR 140 BAR 320 BAR 100 PSI 2000 PSI 3500 PSI 2046 1882 30 219 368 402 2931 4934 2550 2386 32 262 445 431 3520 5964 2921 2757 34 295 501 453 3952 6721 3563 3399 37 351 599 491 4702 8032 4048 3884 39 393 673 519 5268 9023 4457 4293 41 428 735 543 5745 9858 5061 4897 43 481 827 578 6450 11091 5503 5339 45 519 894 604 6966 11994 625 6086 48 584 1008 647 7837 13519 6711 6547 50 625 1078 674 8375 14461 7296 7178 53 675 1003 708 9058 13454

98

Vane Pumps (Mobile & Industrial)


T6H/T7H Hybrid Technology Variable Piston Fixed Vane Pumps
A C B

G E

Dimensions, inch (mm)


Series T6H20B/C T6H29B/C T6H29D T6H29DB A 1264 (3211) 1327 (3371) 1470 (3734) 1930 (4902) B max 031 (79) 0375 (95) 0375 (95) 0375 (95) C Max. 275 (698) 331 (841) 331 (841) 331 (841) D Max 886 (2250) 9056 (2300) 906 (2301) 906 (2301) E 454 (1153) 491 (1247) 492 (1250) 495 (1257) F 319 (810) 359 (912) 359 (912) 359 (912) G Max. 677 (1720) 59 (1499) 59 (1499) 59 (1499) Weight, kg (lb) 816 (371) 1080 (491) 1322 (601) 1587 (721)

99

T6H/T7H Model Ordering Code


T6H
Hybrid Pump Series & P1 Size (P1)

Vane Pumps

Cam Ring (P2)

Cam Ring (P3) Rotation Shaft Seal Class Design Level

Control Connection Variable Flanges Variable Ports Control Accessories

Porting Combination1 Modifications (Code entered at factory)

Code 20B 20C 29B 29C 29D 29DB 262 in /rev (429 cc/rev)
3

P1 Size

Code R L CW CCW

Rotation* Code 0 9 8 7 6 5 Code 0 M Control Accessories Maximum Flow 90% Max Flow 80% Max Flow 70% Max Flow 60% Max Flow 50% Max Flow Variable Flange Connection SAE 4 Bolt Flange (J518c), UNC Thread SAE 4 Bolt Flange (J518c), Metric Thread Variable Port Code 0 1 1" 3/4" B&C P2 1" D P2 1" 3/4" DB P3

378 in3/rev (620 cc/rev)

*As viewed from shaft end Code 1 S1 (Buna N) S5 (fluorocarbon) Design Level T6H20C All Other Sizes Connection (Drain + Vent.) Ext Drain + UNF Thread Ext Drain + BSPP Thread Int Drain + UNF Thread Int Drain + BSPP Thread Control Compensator RC Pilot Operated Compensator RC Pilot Operated Compensator, Load Sensing RC Pilot Operated Compensator with Vent Valve 24 VDC 5 Code C B Code Use B Codes 0 2 3 4 T6H29 Keyed SAE C Splined SAE C Code C F L X* Seal Class

Size T6H20B T6H20C T6H29B T6H29C T6H29D T6H29DB

P2 & P3 Cam Ring Size (See Table Below) P2 Use B Codes Use C Codes Use B Codes Use C Codes Use D Codes Use D Codes P3*

*P3 required for double pumps (DB) only Omit for single pumps Shaft T6H20 Keyed SAE BB Splined SAE C Splined SAE BB Keyed SAE C

Code 1 3 4 5

*Use with external drain only

Cam Ring Codes


B Codes B02 B03 B04 B05 B06 B07 B08 B10 B12 B15 Delivery GPM (LPM) 184 (70) 311 (118) 406 (154) 504 (191) 628 (238) 713 (270) 789 (299) 1008 (381) 1300 (492) 1585 (600) C Codes *03 *05 *06 *08 *10 *12 *14 *17 *20 *22 *25 *28 *31 Delivery GPM (LPM) 342 (129) 545 (206) 675 (256) 837 (317) 1081 (409) 1176 (445) 1458 (552) 1848 (700) 2023 (766) 2229 (844) 2514 (952) 2815 (1066) 3170 (1200) D Codes 014 017 020 024 028 031 035 038 042 045 050 Delivery GPM (LPM) 1509 (571) 1845 (698) 2093 (792) 2520 954) 2844 (1077) 3116 (1180) 3519 (1332) 3814 (1444) 4312 (1632) 4619 (1749) 5009 (1896)

* 0 = uni-rotational; B = bi-rotational Several combinations are available See Catalog on CD = Not Available

100

Motors
(M) = Mobile (I) = Industrial (B) = Mobile & Industrial (M) (M) (M) (M) (M) (M) (B) (B) (B) (B) (B) (B) F11 Small Frame Fixed Displacement Bent-Axis Pumps/Motors

Page

103-106 F12 Large Frame Fixed Displacement Bent-Axis Pumps/Motors 107-110 F1 Fixed Displacement Bent-Axis Truck Pumps/Motors 111-112 V12 Small Frame Variable Displacement Bent-Axis Motors 113-116 V14 Large Frame Variable Displacement Bent-Axis Motors 117-120 T12 Dual Displacement Bent-Axis Motors 121-124 M3/M4 High Performance Vane Motors 125-127 M5 High Performance Fan Drive Vane Motors 128-130 MR-MRE Low Speed High Torque Small Displacement Radial Piston Motors 131-134 MRT-MRTE-MRTF Low Speed High Torque Large Displacement Radial Piston Motors 131,135-137 MRD-MRDE, MRV-MRVE Low Speed High Torque Variable Displacement Radial Piston Motors 131,138-140 Gold Cup Open & Closed Circuit Pumps & Motors for Hydrostatic Transmissions 63-74

Motors (Mobile)
F11 Small Frame Fixed Displacement Bent-Axis Motors
F11 is the well-proven, bent-axis, fixed displacement heavy-duty motor Series. They can be used in numerous applications on both open and closed loop circuits where high speed and extreme shaft loads are required.

Motor Performance Data


Model Series F11005 F11006 F11010 F11012 F11014 F11019 Displacement in3/rev (cc/rev) 030 (49) 037 (60) 060 (98) 076 (125) 087 (143) 116 (190) Outlet Pressure PSI (BAR) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) 5000 (350) Continuous Drive Speed RPM 12800 10200 10200 9400 9000 8100 Flow @ Rated RPM GPM (LPM) 14 (530) 16 (606) 26 (984) 31 (1173) 34 (1287) 40 (1514)

Markets
Forestry Industrial Marine Oil & Gas Construction Mining Material Handling Recycling Military Aircraft Test Stands

Applications
Saw Drives, Feller Bunchers, Skidder, Forwarder, Cranes, Mowers / Cutters Deck Cranes, Constant Tension Winches, Hatch Covers Nitrogen Pumpers, Frac Trucks, Coil Tubing Skid Steer, Off-Highway Trucks, Fan Drives, Cranes, Dust Collector, Excavator Drill Rigs, Top Drives, Loaders, Subsurface Loaders, Tunneling Equipment Conveyor Drives, Truck Mounted Cranes, Mixers Shredders, Vaccum Truck Systems Fan Drives

103

Motors (Mobile)
F11 Small Frame Fixed Displacement Bent-Axis Motors
Performance Characteristics
100

F11 Series Overall Efficiency


Motor - 250 bar (3625 PSI)

Overall Efficiency - %

95

90

85

80

2000

4000

6000

8000

10000

Speed (rpm)
F11-5 F11-06 F11-10 F11-19

F11 Series Overall Efficiency

Benefits/Features
F11 motors can be used at unusually high shaft speeds Operating pressures to 6091.59 PSI (420 BAR) Compact, lightweight motor and pump Laminated piston ring provides low internal leakage and thermal shock resistance F11 Series have very few moving parts Heavy duty roller bearings

100

Motor - 250 bar (3625 PSI)

Overall Efficiency - %

95

90

85

80

500

1000

1500

2000

2500

3000

Speed (rpm)
F11-150 F11-250

104

Motors (Mobile)
F11 Small Frame Fixed Displacement Bent-Axis Motors
F11-14
(SAE versions)

F11-150
(SAE version)

F max

B C

B C1

CCW

CW

H
A

G max

Dimensions, inch (mm)


Series F11-10 F11-14 F11-19 A max 621 (1757) 713 (1811) B 031 (79) 031 (79) C C1 D E F G max H 150 (381) 130 (330) 150 (381) 130 (330)

H max

209 (531) 402 (1021) 398 (1011) 685 (1740) 472 (1199) 248 (630) 346 (879) 449 (1140) 693 (1760) 484 (1229)

105

F11 Model Ordering Code


F11
Bent Axis Motor

Motors

Function Main Ports

S
SAE Shaft Mounting Seal 1 Flange

Shaft

Version Number2

Option3

Displacement in3/rev (cc/rev)

Speed Sensor Option

Code 005* 006* 010* 012* 014 019


3

Displacement in3/rev (cc/rev) 030 in /rev (49 cc/rev) 037 in3/rev (60 cc/rev) 060 in3/rev (98 cc/rev) 076 in3/rev (125 cc/rev) 087 in3/rev (143 cc/rev) 116 in3/rev (190 cc/rev)

Code N V S

Shaft Seal NBR*, Low Pressure FPM**, High Pressure, High Temperature FPM**, Saw Motor

005 x

006 x x x

010

012

014

019 x x x

x
x x

* NBR - Nitrile rubber ** FPM - Fluorocarbon rubber Code T 005 x x 006 x 010 x x 012 014 019 x x x S K D SAE Key SAE Spline Metric Key DIN 5480 Spline Shaft 005 006 010 012 014 x x 019 x x

* ISO or CETOP mounting options, see catalog on CD Code M H S Motor Motor, High Pressure Motor, High Speed Function

x x x

x x x

x x x

x x

x x

x x

For metric options, see catalog on CD Code Option Make-up valve clockwise Make-up valve counter clockwise Speed Sensor Prepared for Speed Sensor 005 006 010 012 x x 012 x 014 x x 014 x 019 x x 019 x

* Internal drain Code U B F Main Ports SAE, UN Threads BSP Threads SAE 6000 psi (4137 bar) Flange* 005 x x 006 x x 010 x 012 x x x 014 x 019 x x

MVR MVL Code P


005


006

x x
010

x x

x x

* Metric female threads ** UNF threads x: Available : Not Available NOTE: CETOP and ISO mounting also available See catalog on CD Assigned by factory for special versions 3 None (see catalog on CD)
1 2

Order speed sensor kit# 3785190 separately

106

Motors (Mobile)
F12 Large Frame Fixed Displacement Bent-Axis Motors
Series F12 is the high performance bent-axis, fixed displacement heavy-duty motor series. They can be used in numerous applications at unusually high shaft speeds.

Motor Performance Data


Model Series F12-030 F12-040 F12-060 F12-080 F12-090 F12-110 F12-125 F12-150 F12-250 Displacement in3/rev (cc/rev) 183 (300) 244 (400) 364 (596) 491 (804) 568 (930) 672 (1101) 763 (1250) 915 (1500) 1477 (2420) Maximum Outlet Pressure PSI (BAR) 6000 (420) 6000 (420) 6000 (420) 6000 (420) 6000 (420) 6000 (420) 6000 (420) 5000 (350) 5000 (350) Rated Drive Speed RPM 6700 6100 5300 4800 4600 4400 4200 3200 2700 Flow GPM (LPM) 44 (1666) 53 (2006) 68 (2574) 85 (3218) 105 (3975) 103 (1399) 154 (5830)

Markets
Forestry Industrial Marine Oil & Gas Construction Mining Material Handling Recycling Military Aircraft Test Stands

Applications
Saw Drives, Feller Bunchers, Skidder, Forwarder, Cranes, Mowers / Cutters Deck Cranes, Constant Tension Winches, Hatch Covers Nitrogen Pumpers, Frac Trucks Skid Steer, Off-Highway Trucks, Fan Drives, Cranes, Dust Collector, Excavator Drill Rigs, Top Drives, Loaders, Subsurface Loaders, Tunneling Equipment Conveyor Drives, Truck Mounted Cranes, Mixers Shredders, Vaccum Truck Systems Fan Drives

107

Motors (Mobile)
F12 Large Frame Fixed Displacement Bent-Axis Motors
Performance Characteristics
100

F12 Series Overall Efficiency


Motor - 420 bar (6092 PSI)

Overall Efficiency - %

95

90

85

2000

4000

6000

60

Speed (rpm)
F12-30 F12-40 F12-60

F12 Series Overall Efficiency


Motor - 420 bar (6092 PSI)
100

Overall Efficiency - %

95

90

110

85

2000

4000

Speed (rpm)
F12-80 F12-110

Benefits/Features
Operating pressures to 6961.81 PSI (480 BAR) Compact, lightweight motor and pump Laminated piston ring provides low internal leakage and thermal shock resistance F12 Series have very few moving parts Heavy duty roller bearings
100

F12 Series Overall Efficiency


Motor - 250 bar (3625 PSI)

Overall Efficiency - %

95

90

85

80

500

1000

1500

2000

2500

3000

Speed (rpm)
F11-150 F11-250

108

Motors (Mobile)
F12 Large Frame Fixed Displacement Bent-Axis Motors
Shown: F12-60 with 2-bolt flange
F E D

B C

C2

Shown: F12-80 with 4-Bolt Flange


E D F

B C

C2

Dimensions, inch (mm)


Series 2-BOLT F12-30 F12-40 F12-60 Series 4-BOLT F12-30 F12-40 F12-60 F12-80 F12-90 A 746 (1895) 776 (1971) 843 (2141) A 746 (1895) 776 (1971) 843 (2141) 945 (2400) 945 (2400) B 031 (79) 03) (79) 031 (79) B 031 (79) 031 (79) 031 (79) 031 (79) 031 (79) C 15 (381) 189 (480) 189 (480) C 150 (381) 189 (480) 189 (480) 213 (541) 213 (541) 264 (671) 264 (671) C2 13 (330) 189 (480) 189 (480) C2 130 (330) 189 (480) 189 (480) 213 (541) 213 (541) 263 (668) 263 (668) D D 232 (589) 256 (640) 276 (701) E E 394 (1001) 433 (1100) 492 (1250) F F 480 (1219) 528 (1341) 567 (1440) G G 693 (1760) 846 (2149) 846 (2149) H

232 (589) 394 (1001) 480 (1219) 465 (1181) 465 (1181) 256 (650) 433 (1100) 528 (1341) 583 (1481) 567 (1440) 276 (701) 492 (1250) 567 (1440) 583 (1481) 567 (1440) 305 (775) 531 (1349) 610 (1549) 610 (1549) 610 (1549) 305 (775) 531 (1349) 610 (1549) 610 (1549) 610 (1549) 335 (851) 571 (1450) 669 (1699) 803 (2040) 787 (1999) 335 (851) 571 (1450) 669 (1699) 803 (2040) 787 (1999)

F12-110 1039 (2639) 031 (79) F12-125 1039 (2639) 031 (79)

109

F12 Model Ordering Code


F12
Axial Piston Motor

Motors

Option

Displacement in3/rev (cc/rev)

Motor Function Main Ports

Mounting Flange Shaft Seal

Shaft

Version Number1

Speed Sensor Option

Code 030 040 060 080 090 110 125 150 250 Code M H Q Code S U* F
3

Displacement in3/rev (cc/rev) 183 in /rev (300 cc/rev) 244 in3/rev (400 cc/rev) 365 in3/rev (598 cc/rev) 491 in3/rev (804 cc/rev) 568 in3/rev (930 cc/rev) 672 in3/rev (1101 cc/rev) 763 in3/rev (1250 cc/rev) 915 in3/rev (1500 cc/rev) 1477 in /rev (2420 cc/rev)
3

Code N V

Shaft Seal NBR*, Low Pressure FPM**, High Pressure, High Temperature

30 40 60 80 90 110 125 150 250 x x x x x x x x x x x x x x x x

* NBR - Nitrile rubber ** FPM - Fluorocarbon rubber Code S U T K 60 x 80 x 90 110 125 150 250 x x x x x Shaft SAE Spline (std) SAE Spline (opt) SAE Key (std) Metric Key SAE Spline Spline, DIN 5480 Option Standard Integr Flushing Valve Make-up valve counter clockwise rotation Make-up valve clockwise rotation 30 40 60 80 90 110 125 150 250 x x x x x x x x x x x x x


x x x


x x x x

x x x

Motor Function Motor Motor-High Pressure Quiet Main Ports SAE Flange Code 62 6000 PSI (4137 BAR) SAE, UN Threads SAE 6000 PSI Flange

30 x

40 x

F D Code 000 L01 MVL MVR


30 x x


40 x x


60 x x


80 x x

30 40 60 80 90 110 125 150 250 x x x x x x x x x x x x x x x x

90 110 125 150 250 x x x x x x

* *

* F12-110 accessory valve block See page 36 of catalog on CD Code Speed Sensor Option 30 40 60 80 90 110 125 150 250 Standard Prepared for Speed Sensor x x x x x x x x x x x x x x x x

* Reduced pressure rating 350 bar Code S T X Mounting Flange SAE 4 bolt SAE 2 bolt SAE D 4 bolt 30 x x 40 x x 60 x x 80 x 90 110 125 150 250 x x x x x

0 P

NOTE: ISO and cartidge mounting also available See catalog on CD

x: Available : Not Available Assigned by factory for special versions 2 Order speed sensor kit# 3785190 separately
1

110

Motors (Mobile)
F1 Fixed Displacement Bent-Axis Truck Motors
F1 Motors are used on applications that do not require high shaft sideloading. Their light weight, compact size and efficient design make them the first choice on many mobile applications including winches, augers and spreaders.

Motor Performance Data


Model Series F1-25-M F1-41-M F1-51-M F1-61-M F1-81-M F1-101-M Displacement in3/rev (cc/rev) 156 (256) 250 (409) 312 (511) 363 (595) 498 (816) 628 (1029) Maximum Cont. Pressure PSI (BAR) 3600 (250) 3600 (250) 3600 (250) 3600 (250) 3600 (250) 3600 (250) Rated Drive Speed RPM 2300 2000 1800 1700 1500 1400 Max. Theoretical Torque in-lb (m-kg) 719 (828) 1154 (1330) 1439 (1658) 1678 (1932 g) 2300 (2650) 2904 (3346) Maximum Output Power @ Rated Speed HP (KW) 27 (201) 36 (268) 41 (306) 45 (336) 55 (410) 64 (477)

Markets
Forestry Construction Mining Material Handling Recycling Military Off-Highway Trucks, Fan Drives Dump Trucks Truck Mounted Cranes, Lift Trucks

Applications
Knuckle Boom Loader, Cranes, Mowers / Cutters

Vaccum Truck Systems, Refuse Trucks - ASL, Rear Loaders Fan Drives

Benefits/Features
Higher self-priming speeds Operating pressures to 5801.51 PSI (400 BAR) New frame sizes to meet market requirements Higher overall efficiency Increased reliability Reduced noise level Smaller installation dimensions

111

F1 Model Ordering Code


F1
Fixed Displacenent Bent Axis Motor

Motors
Ordering No. 378 1724 378 1740 378 1750 378 1760 378 1780 378-1800

Frame Size Code 25 41 51 61 81 101 Frame Size

Ordering Code F1-25-M F1-41-M F1-51-M

156 in3/rev (256 cc/rev) 250 in3/rev (409 cc/rev) 312 in3/rev (511 cc/rev) 366 in3/rev (595 cc/rev) 498 in3/rev (816 cc/rev) 628 in3/rev (1029 cc/rev)

NOTES: 1 Pressure port on 25, 41, 51 and 61 sizes is 3/4" Pressure port on 81 and 101 sizes is 1" 2 Suction fitting must be ordered separately 3 Use seven digit number when placing order

F1-61-M F1-81-M F1-101-M

F1 Fixed Displacement Bent-Axis Truck Pumps/Motors


D

Dimensions, inch (mm)


Series F1-25 F1-41 F1-51 F1-61 F1-81 F1-101 A 807 (205) B 027 (7) C 217 (55) D 510 (1295) E 222 (565) F 425 (108) G 429 (109)

1020 (259)

027 (7)

217 (55)

567 (144)

248 (63)

465 (118)

433 (110)

112

Motors (Mobile)
V12 Small Frame Variable Displacement Bent-Axis Motors
Series V12 is a bent-axis, variable displacement motor. It is intended for both open and closed circuits, mainly in mobile applications, but the V12 can also be utilized in a wide variety of other applications.

Motor Performance Data


Model Series V12-60 V12-80 Displacement 366 (60) 488 (80) Outlet Pressure 6000 (420) 6000 (420) Drive Speed 5600 5000 Flow @ Rated RPM 57 (2158) 66 (2498)

Markets
Forestry Marine Construction Mining Power Gen Material handling Recycling Military Deck Cranes, Constant Tension Winches Wheel Loader, Cranes, Excavator

Applications
Feller Bunchers, Skidder, Forwarder, Cranes

Drill Rigs, Top Drives, Loaders, Subsurface Loaders, Tunneling Equipment Turbine Start Conveyor Drives, Truck Mounted Cranes, Mixers Shredders Fan Drives

113

Motors (Mobile)
V12 Small Frame Variable Displacement Bent-Axis Motors
Performance Characteristics
100 95

V12-60 Series Overall Efficiency


Motor - 420 bar (6092 PSI)

Overall Efficiency - %

90 85 80 75 70 65 60 55 0

250

1000

2000

3000

4000

5000

Speed (rpm)
Full Displacement Minimum Displacement

V12-80 Series Overall Efficiency


Motor - 420 bar (6092 PSI)

Benefits/Features
Tolerates very high speeds due to low weight pistons with laminated piston rings and a compact design of the rotating parts High output power; the overall efficiency remains high throughout the entire displacement range The 9-piston design provides high start-up torque and smooth motor operation Wide displacement ratio (5:1) Broad range of controls and accessory valves for most applications Small envelope size and a high power-to-weight ratio ISO, cartridge and SAE versions Low noise levels due to a very compact and sturdy design with smooth fluid passages Positive piston locking, strong synchronizing shaft, heavy-duty bearings and small number of parts add up to a compact and robust motor with long service life and proven reliability.
Overall Efficiency - %

100 95 90 85 80 75 70 65 60 55 0

250

1000

2000

3000

4000

5000

Speed (rpm)
Full Displacement Minimum Displacement

114

Motors (Mobile)
V12 Small Frame Variable Displacement Bent-Axis Motors

H (max) J (max) E (max) D (max)

V12

-80

8 (0.31)

C G F

Dimensions, inch (mm)


Series V12-60 V12-80 A 1051 (267) 1102 (280) C max 219 (556) 219 (556) D max 740 (188) 760 (193) E max 343 (87) 354 (90) F 303 (77) 315 (80) G 299 (76) 307 (78) H max 587 (149) 587 (149) J max 626 (159) 650 (165)

115

V12 Model Ordering Code


V12
Motor Series Frame Size

Motors
- L 01

Function Main Ports

S
SAE Mounting Flange** Shaft Seal

Shaft End

D
Version1 Status2 Speed Sensor

Control Designation Max. and Min. Displacement in cm3/rev (NO TABLE PROVIDED) Settings

Flushing Valve3

Code 60 80 Code M T Code S U Code H V Code S Code 0 S P No Sensor 366 in3/rev (60 cm3/rev) 488 in3/rev (80 cm3/rev)

Frame Size

Code AC I 01 I AC E 01 I

Control Pressure Compensator, internal pilot pressure, internal servo supply Pressure Compensator, external pilot pressure, internal servo supply Pressure Compensator, hydraulic override internal pilot pressure, internal servo supply Pressure compensator, hydraulic override, external pilot pressure, internal servo supply Electrohydraulic, two-position, 12 VDC, internal servo supply Electrohydraulic, two-position, 12 VDC, external servo supply Electrohydraulic, two-position, 24 VDC, internal servo supply Electrohydraulic, proportional, 12 VDC, internal servo supply Electrohydraulic, proportional, 12 VDC, external servo supply Electrohydraulic, proportional, 24 VDC, internal servo supply Electrohydraulic, proportional, 24 VDC, external servo supply Hydraulic, two-position, standard version, internal servo supply Hydraulic, two-position, standard version, external servo supply Hydraulic, proportional, standard version, internal servo supply Hydraulic, proportional, standard version, external servo supply Settings

60 x (x) x (x) x (x) x x (x) x (x) x (x) x (x)

80 x (x) x (x) x (x) x x (x) x (x) x (x) x (x)

Function Motor; normal end cap position (EO, EP, HO & HP only) Motor; normal end cap position (AC & AH only) Main Ports* SAE Flange; UN Threads, Side Ports SAE Flange; UN Threads, Rear Ports Shaft Seal NBR (Nitrile) FPM (High Temperature Fluorocarbon) Shaft End*** Spline (SAE J498b) 60 x (x) 60 (x) Speed Sensor Speed Sensor (not installed) Prepared for Speed Snesor 80 x (x) 80 (x) EPH 01 I EPH 01 E HOS 01 I HOS 01 E HPS 01 I HPS 01 E EPL 01 I EPL 01 E AH I 01 I AH E 01 I EOL 01 I EOL 01 E EOH 01 I

x = standard; (x) = option * Main ports also available with metric threads See CD ** Cartridge and ISO options available See CD *** DIN shaft ends also available See CD 1 Factory issued for special versions 2 Control pressure setting; max and min displacement screws sealed 3 Integrated flushing valve with standard nozzle See CD for options

AC, AH: Threshold Pressure: 2175.57, 2900.76, or 3625.94 PSI (150, 200 or 250 bar) Modulating Pressure: 217.56, 362.59, 725.19 PSI (015, 025 or 050 bar) EO, EP: Threshold Current: 400 mA (12 VDC), 200 mA (24 VDC) Modulating Current: 000 (EO), 600 mA (EP 12 VDC), 300 mA (EP 24 VDC) HO, HP: Threshold Pressure: 145.14 PSI (010 bar) Modulating Pressure: 000 (HO), 217.56 or 362.59 PSI (HP) (000 (HO), 015 or 025 bar (HP))

116

Motors (Mobile)
V14 Large Frame Variable Displacement Bent-Axis Motors
Series V14 is a new generation of variable displacement, bent-axis motors, a further development of our well known V12 motor. It is designed for both open and closed circuit transmissions with focus on high performance machines.

Motor Performance Data


Model Series V14-110 V14-160 Displacement in3/rev (cc/rev) 671 (110) 976 (160) Outlet Pressure PSI (BAR) 6000 (420) 6000 (420) Drive Speed RPM 5700 5000 Flow GPM (LPM) 99 (3748) 127 (4808)

Markets
Forestry Marine Construction Mining Power Gen Material handling Recycling Military Deck Cranes, Constant Tension Winches Wheel Loader, Cranes, Excavator

Applications
Feller Bunchers, Skidder, Forwarder, Cranes

Drill Rigs, Top Drives, Loaders, Subsurface Loaders, Tunneling Equipment Turbine Start Conveyor Drives, Truck Mounted Cranes, Mixers Shredders Fan Drives

117

Motors (Mobile)
V14 Large Frame Variable Displacement Bent-Axis Motors
Performance Characteristics
100 95

V14-110 Series Overall Efficiency


Motor - 420 bar (6092 PSI)

Overall Efficiency - %

90 85 80 75 70 65 60 55 0

250

1000

2000

3000

4000

5000

Speed (rpm)
Full Displacement Minimum Displacement

V14-160 Series Overall Efficiency


Motor - 420 bar (6092 PSI)
100 95

Applications
Excavators Forestry machines Mining and drilling machines Wheel loaders Winch drives

Overall Efficiency - %

90 85 80 75 70 65 60 55 0

Optional equipment
Integrated sensors for speed and displacement Integrated flushing and pressure relief valves

250

1000

2000

3000

4000

5000

Speed (rpm)
Full Displacement Minimum Displacement

Additional benefits
Improved speed capability Improved control performance Reduced number of parts Stronger shaft bearing support.

118

Motors (Mobile)
V14 Large Frame Variable Displacement Bent-Axis Motors

F E D

12.5 (0.49)

C G

Dimensions, inch (mm)


Series V14-110 V14-160 A 1154 (293) 1291 (328) C 293 (745) 295 (75) D 591 (150) 547 (139) E 819 (208) 862 (219) F 685 (174) 685 (174) G 803 (204) 787 (200)

119

V14 Model Ordering Code


V14
Motor Series Frame Size

Motors
/

Mounting Flange Shaft Seal Shaft End

Control Restrictor Set Control Signal

Valve Options Modulating Press/current

Valve Operating Pressure1

Sensor Options

Version2

Threshold Setting Max. and Min. Displacement in cm3/rev (NO TABLE PROVIDED)

Code 110 160 Code S I C* * 110 only Code H V Code S C D Code AC AD AH EO EP HO HP Code E I H L Presure Compensator SAE (SAE Version) DIN (ISO Version) DIN (ISO Version) NBR (Nitrile) SAE version ISO version Cartridge version 671 in3/rev (110 cm3/rev) 976 in3/rev (160 cm3/rev)

Frame Size

Code 1 2 3 4 Code N 07 08 10 (standard) 12

Control Restrictor Set (orifice dia. in mm)

Mounting Flange

Control Modulating Pressure/Current AC: 0 bar EP: Non-selectable current 21756 PSI (15 bar) (AC, HP) 36259 PSI (25 bar) (AC, HP) 72519 PSI (50 bar) (AC) Valve Options None Flushing Valve Pressure Relief Valve Sensor Options None Prepared for Setting Piston Position and Shaft Speed Sensors (EP, HP) Setting Piston Position and Shaft Speed Sensors (EP, HP) Setting Piston Position Sensor (EP, HP) Prepared for Speed Sensor Speed Sensor Prepared for Setting Piston Position Sensor Threshold Setting Select pressure between 145038-507632 PSI (100-350 bar) (AC, AD, AH only) 400 mA - 12 VDC (EO, EP only) 200 mA - 24 VDC (EO, EP only) 14514 PSI (10 bar) (HO, HP only)

Shaft Seal FPM (High Temperature Fluorocarbon) Shaft End

A B C Code N L P

Control Press Compensator with electrohydraulic override and brake defeat valve Pressure Compensator with hydraulic override Electrohydraulic, two-position Electrohydraulic, proportional Hydraulic, two-position Hydraulic, proportional Control Signal External Pressure (HO, HP) Internal Pressure (AC, AD, AH) 24 VDC (EO, EP) 12 VDC (EO, EP)

Code N C D L P S T Code *** 400 200 10

Pressure Relief Valve opening pressure (bar) Alternately: Flushing Valve restrictor 2 Factory issued for special versions
1

120

Motors (Mobile)
T12 Dual Displacement Bent-Axis Motors
The T12 two-displacement motor is tailor-made for track drives. It allows a high ratio between high and low speed and installs as easily as a fixed displacement motor. Max speed ratio is 3.33to-1. The T12 is a cartridge motor based on the well proven V12 series. The specially designed end cap with dual side ports permits a very short installation. A simple setting device moves the cylinder barrel to the maximum or minimum displacement position. The setting is controlled by an external hydraulic pilot signal. A brake valve can be fitted without increasing the axial length of the motor. The twin ports have the samemounting pattern as those of the F12 and V12 motors. The F12/ V12 accessory valve program also fits the T12 motor. As an option, integrated pressure relief valves can be included.

Motor Performance Data


Model Series T12-60 T12-80 Displacement in3/rev (cc/rev) 366 (60) 488 (80) Outlet Pressure PSI (BAR) 6000 (420) 6000 (420) Drive Speed RPM 5600 5000 Flow @ Rated RPM GPM (LPM) 57 (2158) 66 (2498)

Markets
Forestry Construction Feller Bunchers, Skidder, Forwarder Dozers, Excavator

Applications

121

Motors (Mobile)
T12 Dual Displacement Bent-Axis Motors

Benefits/Features
Designed for Track drive applications the 3.33 to 1 speed ratio provides versatility Cartridge mount allows very short installation dimension Optional valve blocks do not add to length F12/V12 accessory valves will fit T12 motor

122

Motors (Mobile)
T12 Dual Displacement Bent-Axis Motors
F

H J max D E

C max

Dimensions, inch (mm)


Series T12-60 T12-80 A 646 (164) 630 (160) C max 520 (132) 612 (1555) D 752 (191) 807 (205) E 307 (78) F 309 (785) 352 (895) G 329 (835) 392 (995) H 909 (231) 1035 (263) J max 500 (127) 535 (136)

123

T12 Model Ordering Code


T12 Motor Series Frame Size

Motors

-M T C
Main Ports Metric Threads Shaft Seal

Shaft End

- HO - T -

- I - 015 / 000

Serial Number1

Motor; bidirectional Function

Cartridge Mounting Flange

Hydraulic Control Threshold Two-Position Response 15 Bar Control (Standard) Technical Max. and Min. Track Internal Pressure Status2 Displacement Drive Servo Setting Specify in cm3/rev Function Supply 0 Bar (NO TABLE PROVIDED) (Standard)

Code 060 080 Code H V Code C D Code 01 02


1 2 3

Frame Size 366 in /rev (60 cm3/rev) 488 in3/rev (80 cm3/rev) Shaft Seal NBR (Nitrile) FPM (High Temperature Fluorocarbon) Shaft End Spline DIN 5480 (Std) Spline DIN 5480 Control Response Fast (Standard) Slow (Optional)

Assigned for special versions Assigned by factory

124

Motors (Mobile & Industrial)


M3/M4 High Performance Vane Motors
The M3 and M4 Series vane motors are fixed displacement and designed especially for severe duty applications. The balance vane cartridge concept provides high volumetric efficiency, longer life, lower noise, and a high starting torque efficiency. The double motor is ideal for applications to obtain three-speed operation.

Motor Performance Data


Single Pump Model Series M3B M4C M4SC M4D M4SD M4E M4SE Double Pump Model Series M4DC M4SDC Displacement in3/rev (cc/rev) 056 - 226 (92 - 371) 149 - 489 (244 - 801) 149 - 489 (244 - 801) 397 - 881 (651 - 1444) 397 - 881 (651 - 1444) 969 - 1355 (1588 - 222) 969 - 1355 (1588 - 222) Displacement in3/rev (cc/rev) 546 - 1370 (895 - 2245) 546 - 1370 (895 - 2245) Max. Outlet Pressure* PSI (BAR) 3000 (210) 2500 (175) 3400 (235) 2500 (175) 3400 (235) 2500 (175) 2800 (190) Max. Outlet Pressure* PSI (BAR) 2500 (175) 3400 (235) Rated Drive Speed* RPM 4000 4000 4000 4000 4000 3600 3600 Rated Drive Speed* RPM 4000 4000 Torque (in-lb/PSI) 008 - 038 024 - 078 024 - 078 063 - 140 063 - 140 154 - 216 154 - 216 Torque @2000 RPM and 2500 PSI 087 - 218 087 - 218

* Intermittent conditions are to be less than 10% of each minute.

Benefits/Features
Low ripple torque Low starting torque Low noise Bi-rotational technology Various pilot, threaded port and porting configurations External/internal drain option Many displacement combinations for double motor

125

Motors (Mobile & Industrial)


M3/M4 High Performance Vane Motors
A B C

M3

M4 Single

A C B

M4 Double

D F E

Dimensions, inch (mm)


Series M3B M4C M4D M4E M4DC A 574 (1458) 723 (1836) 801 (2035) 1066 (2708) 1363 (3462) B 219 (556) 281 (714) 219 (556) 331 (841) 219 (556) C 512 (1300) 693 (1760) 836 (2123) 838 (2129) 836 (2123) D 375 (953) E 325 (826) F 475 (1207) 475 (1207) 70 (1778) Weight, lb (kg) 176 (80) 340 155) 595 (270) 990 (450) 880 (400)

126

Motors

M3/M4 Model Ordering Code

Series Service Drain Torque

Torque (M4DC only)

Shaft Type

00
Standard Porting Combinations1 Design Level Seal Port Class Connection

00
Modifications (Code entered at factory)

Bi-directional Rotation Series M3B M4C M4D M4E M4DC Code Omit S* Standard Severe Duty Service Code A B Code 1* 4** 5 S1 Buna N S4 EPDM S5 Fluorocarbon M4C only M3B, M4D, M4E, M4DC Seal Class Design Level

No Control (M4DC only)

* Not available on M3B Code Omit 1 External Internal Torque Codes (See Table Below) Series M3B M4C M4D M4E M4DC Single Pumps Use M3B Codes Use M4C Codes Use M4D Codes Use M4E Codes Use M4D Codes Shaft Type 3B Keyed (non SAE) 4C/4CS Keyed SAE B Keyed (non SAE) Splined SAE A Splined SAE B Splined SAE B Splined SAE C Splined SAE C 4D/4DS, 4DC Keyed SAE C 4E/4ES Keyed SAE C Use M4C Codes Double Pumps A1 - B1 Double Pump A2 - B2 Drain

* Not available on M4E ** Available on M3B only Must be ordered for severe duty motors Port Connection Code M3B SAE Threaded Port SAE Drain SAE 4 Bolt Flange BSPP Drain BSPP Threaded Port BSPP Drain SAE Threaded Port SAE Drain SAE 4 Bolt Flange UNC Threaded SAE Drain SAE 4 Bolt Flange UNC Threaded BSPP Drain SAE 4-Bolt Flange Metric Thread BSPP Drain M4C/M4D/M4E M4DC

00 01 02

04

M4* * Not available on M4DC

Code 1 2 3 4

Torques
M3B Codes 009 012 018 027 036 Torque, in-lb/PSI 008 011 019 030 038 M4C Codes 024 027 031 043 055 067 075
1

Torque, in-lb/PSI 024 028 033 045 057 069 078

M4D Codes 062 074 088 102 113 128 138

Torque, in-lb/PSI 063 075 088 096 113 128 140

M4E Codes 153 185 214

Torque, in-lb/PSI 154 186 216

= Omit if not required = Not Available

Other combinations available See catalog on CD

127

Motors (Mobile & Industrial)


M5 High Performance Fan Drive Vane Motors
Keep the M5 fixed displacement vane motors in mind when your application requires radial and/or axial shaft loads. The fan-drive version comes equipped with a rugged double row bearing that can eliminate the need for external supports. An integrated proportional valve option provides speed control for fan circuits. Both fan-drive and standard versions use the same high performance cartridge, giving repeatable speed at specified flows.

Motor Performance Data


Single Pump Model Series M5AF M5B/S M5BF Displacement in3/rev (cc/rev) 038 - 153 (63 - 25) 073 - 275 (12 - 45) 073 - 275 (12 - 45) Max. Outlet Pressure* PSI (BAR) 4350 (300) 4600 (320) 4600 (320) Rated Drive Speed* RPM 6000 6000 6000 Torque (in-lb/PSI) 0060 - 0242 0116 - 0437 0116 - 0437

Markets
Construction Fan Drives

Applications

M5BF M5B

Benefits/Features
Low noise Designed for severe duty applications High efficiency High starting torque Low torque ripple Long life Interchangeable rotating groups Cross port check valve on M5BF/1

M5AF

128

Motors (Mobile & Industrial)


M5 High Performance Fan Drive Vane Motors
B

M5B
E

M5AF, M5BF
E

Dimensions, inch (mm)


Series M5AF M5B M5BF A 358 (909) 659 (1674) 456 (1158) B 297 (754) 275 (698) 287 (729) C 685 (1740) 740 (1880) D 362 (919) 362 (919) 362 (919) E 252* (641) 252 (641) 252 (641) F 274 (696) 275 (698) Weight, lb (kg) 330 (150) 408 (185) 408 (185)

* For relief valve option, add 2.66" (67.6 mm) max.

129

M5 Model Ordering Code

Series Displacement

Motors

Shaft Rotation Porting Combinations1

A
Design Level Seal Class Port/ End Cap Variable Drain Variable

Modifications (Code entered at factory)

Code M5AF M5AF1 M5B M5BS M5BF M4BF1 M5AF Codes 006 010 012 016 018 025 Fan Motor, Internal Drain ISO Flange SAE Flange

Series Description Fan Motor, External Drain

Code 1 5 S1 Buna N S5 Fluorocarbon

Seal Class

Port/End Cap Variables Code M5AF End Cap Variables** 4 Bolt SAE Flange (J518) UNC Thread 4 Bolt SAE Flange (J518) Metric Thread Metric Threaded Ports (ISO 6149) M22x15 SAE Str Threaded Ports 1-1/6"-12 UNF-2B 4 Bolt SAE Flange (J518) Metric Thread, 304579 PSI (210 bar) 4 Bolt SAE Flange (J518) Metric Thread, 203053 PSI (140 bar) 4 Bolt SAE Flange (J518) Metric Thread, 101526 PSI (70 bar) M5B/S, M5BF/1 Port Variables 3/4" SAE 4 Bolt Flange (J518c), UNC Thread 3/4" SAE 4 Bolt Flange (J518c), Metric Thread

Fan Motor, External Drain Fan Motor, Internal Drain Displacement in3/rev (cm3/rev) 038 (62) 061 (10) 076 (111) 098 (161) 110 (18) 152 (249) M5B/ M5BF Codes 012 018 023 028 036 045 Shaft Type M5AF/1 Taper (non SAE) Keyed (non SAE) M5B/S Keyed SAE B J744 Keyed ISO E25M - 3019-2 Splined SAE B J498 Splined SAE BB J498 Keyed ISO G32N Rotation Bi-directional CW CCW Code 2 3 X M5BF/1 Keyed Taper (non SAE) Keyed SAE C J744c C* Displacement in3/rev (cm3/rev) 073 (12) 110 (18) 140 (229) 171 (28) 220 (361) 275 (451) B* A* 0 M Y W

Code 1 2 3 4 W Code N* R** L**

* Motors with proportional pressure relief valve only (external drain and uni-rotational only) ** All uni-rotational motors have an internal check valve included Not available on M5BF1 Drain Variables M5AF 9/16" SAE M12 x 15 Metric No Drain M5AF1 M5B/S 9/16" SAE M18 x 06 Metric M5BF 9/16" SAE M18 x 06 Metric No Drain M5BF1

* Not available on M5AF1, M5BF1 ** Viewed from shaft end; not available on M5B, M5BS

Several combinations available See catalog on CD

= Not Available

130

Motors (Mobile & Industrial)


Calzoni
The outstanding performance of this robust product is the result of our original, patented design. Used widely in the injection molding, mining, off shore drilling, oil field, and marine markets, the Parker Calzoni motor is produced in sizes from 32cc up to 23034cc per revolution. The efficiency ofour design allows for a smaller installed product for the same displacement vs. our competitors. Since there are no internal connecting rods, we have greatly reduced frictional drag as well as most thrust loading. By creating a static balance on the shaft we have extended the expected lifetime as well.

MR-MRE Low Speed High Torque Small Displacement Radial Piston Motors

MRT-MRTE-MRTF Low Speed High Torque Large Displacement Radial Piston Motors

MRD-MRDE, MRV-MRVE Low Speed High Torque Variable Displacement Radial Piston Motors

Performance Data
Series MR MRE MRT MRTE/MRTF Displacement in3/rev (cc/rev) 196 - 42516 (321 - 69672) 2028 - 50201 (3324 - 82264) 43327 - 119045 (7100 - 19508) 47647 - 140562 (7808 - 23034) Displacement in3/rev (cc/rev) 1856 - 41905 (3041 - 6867) 2028 - 50198 (3324 - 8226) Max. Pressure PSI (BAR) 4350 (300) 3600 (250) 4350 (300) 3600 (250) Max. Pressure PSI (BAR) 4350 (300) 3600 (250) Max. Speed RPM 1100 1000 Max. Speed RPM 1400 750 150 130 Min. Torque (in-lb/PSI) 0123 - 1823 0135 - 2187 Torque (in-lb/PSI) 0025 - 5665 0270 - 6657 575 - 1579 632 - 1864 Max. Torque (in-lb/PSI) 0244 - 3646 0270 - 4374

Series MRD/MRV MRDE/MRVE

131

Motors (Mobile & Industrial)


MR-MRE Low Speed High Torque Small Displacement Radial Piston Motors
Performance Data
Series MR33 MR57 MR73 MR93 MR110 MR125 MR160 MR190 MR200 MR250 MR300 MR350 MR450 MR600 MR700 MR1100 MR1600 MR1800 MR2400 MR2800 MR3600 MR4500 MR6500 MR7000 MRE330 MRE500 MRE800 MRE1400 MRE2100 MRE3100 MRE5400 MRE8200 Displacement in3/rev (cc/rev) 196 (321) 344 (564) 443 (726) 565 (926) 665 (1090) 761 (1247) 975 (1597) 1169 (1916) 1216 (1992) 1531 (2509) 1856 (3044) 2133 (3495) 2756 (4516) 3710 (6079) 4309 (7069) 687 (11258) 9754 (15984) 11043 (18096) 13993 (22931) 17038 (27920) 22193 (36368) 27477 (45027) 39424 (64605) 42516 (69672) 2028 (3324 3038 (4979) 4908 (8042) 8357 (13695) 12761 (20912) 18940 (31037) 3296 (54012) 5020 (82264) Max. Pressure PSi (BAR) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 3600 (250) 3600 (250) 3600 (250) 3600 (250) 3600 (250) 3600 (250) 3600 (250) 3600 (250) Max. Speed RPM 1800 1600 1200 1150 1100 900 900 850 800 800 750 640 600 520 500 330 260 250 220 215 180 170 130 130 750 600 450 280 250 215 160 130 Torque (in-lb/PSI) 0025 0046 0061 0076 0087 0102 0129 0155 0163 0203 0244 0283 0366 0493 0575 0910 1292 1465 1937 2263 2944 3346 5267 5665 0270 0403 0651 1109 1693 2512 4374 6657

132

Motors (Mobile & Industrial)


MR-MRE Low Speed High Torque Small Displacement Radial Piston Motors
Benefits/Features
5-piston design Wide range of displacements Starting torque from 90-95% theoretical Total efficiency up to 96% Resistance to thermal shocks T = 176F Speed feedback accessories optional

Dimensions, inch (mm)


Series MR33 MR57 MR73 MR93 MR110 MR125 MR160 MR190 MR200 MR250 MR300 MRE330 MR350 MR450 MRE500 MR600 MR700 MRE800 MR1100 MRE1400 MR1600 MR1800 MRE2100 MR2400 MR2800 MRE3100 MR3600 MR4500 MRE5400 MR6500 MR7000 MRE8200 A 772 (1961) 90 (2286) 953 (2421) C Max. 225 (572) 270 (686) 264 (671) D 927 (2355) 984 (2499) 1233 (3132)

953 (2421)

319 (810)

1291 (3279)

1098 (1789)

382 (970)

1449 (3680)

1177 (2990) 1343 (3411) 1472 (3739)

398 (1011) 461 (1171) 520 (1321)

1595 (4051) 185 (4699) 2197 (5580)

1835 (4661)

602 (1529)

2528 (6421)

1927 (4895)

827 (2101)

3016 (7661)

2228 (5659)

906 (2301)

3402 (8641)

133

MR/MRE Model Ordering Code

Motor Series Size & Displacement Shaft Speed Sensor Option Seals Connection Flange Rotation Special (Entered by Factory)

Motors

Code MR MRE

Motor Series Standard 3626 PSI (2500 BAR) Max Continuous Expanded 3026 PSI (2086 BAR) Max Continuous Size & Displacement

Code N1 D1 F1 P1 B1 MRE Code N1 Q1 C1 T1 M1 B1 None Encoder Drive Spline Ex DIN 5463 Spline DIN 5480 Female Spline DIN 5480 Shaft with Key Spline BS 3550

Shaft

Code 33A 57A 73B 93B 110B 125C 160C 190C 200D 250D 300D 330D 350E 450E 500E 600F 700F 800F 1100G 1400G 1600H 1800H 2100H 2400I 2800I 2100I 3600L 4500L 5400L 6500M 7000M 8200M

Displacement in3 (cm3) 196 (321) 344 (564) 443 (726) 565 (926) 665 (1090) 761 (1247) 975 (1598) 1169 (1916) 1216 (1993) 1531 (2509) 1856 (3045) 2028 (3323) 2133 (3495) 2756 (4516) 3038 (4978) 3710 (6080) 4309 (7061) 4908 (8043) 687 (1126) 836 (1370) 975 (1598) 1104 (1809) 1276 (2091) 1399 (2292) 1704 (2792) 1894 (3104) 2219 (3636) 2748 (4503) 3296 (5401) 3942 (6460) 4087 (6697) 5020 (8226)

MR x x x x x x x x x x x

Speed Sensor Option

Mechanized Tachometer Drive Tachometer Drive Incremental Elcis Encoder, Uni-directional* Incremental Elcis Encoder, Bi-directional*

* 500 pulse/rev Code N1 F1 V1 U1 Code N1 C1 S1 T1 G1 L1 Code N Standard Rotation (CW: Inlet in A; CCW: Inlet in B) Reversed Rotation (CW: Inlet in B; CCW: Inlet in A) None Standard DENISON Calzoni Standard SAE Metric Standard SAE UNC SAE 6000 PSI (4137 BAR) Metric SAE 6000 PSI (4137 BAR) UNC Rotation NBR Mineral Oil NBR, 218 PSI (150 BAR) Shaft Seal Fluorocarbon No Shaft Seal (for Brake) Connection Flange Seals

x x

x x

x x

x x


x S

x x

x x

134

Motors (Mobile & Industrial)


MRT-MRTE-MRTF Low Speed High Torque Large Displacement Radial Piston Motors
Performance Data
Series MRT7100 MRTF7800 MRTE8500 MRT9000 MRTF9900 MRT14000 MRTF15500 MRTE16500 MRT17000 MRTF18000 MRT19500 MRTE20000 MRTF21500 MRTE23000 Displacement Max. Pressure Max. Speed in3/rev (cc/rev) PSI (BAR) RPM 43329 (71004) 47650 (78084) 51976 (85173) 54954 (90054) 60437 (99039) 85494 (14010) 93220 (15276 100946 (16542) 102270 (16759) 109995 (18025) 119045 (19508) 120754 (19788) 129804 (21271) 140562 (23034) 4350 (300) 3600 (250) 3600 (250) 4350 (300) 3600 (250) 3600 (250) 4350 (300) 3600 (250) 3600 (250) 4350 (300) 3600 (250) 4350 (300) 3600 (250) 3600 (250) 3600 (250) 150 130 120 130 120 110 80 75 70 70 65 60 60 55 50 Torque (in-lb/PSI) 575 632 690 729 802 875 1134 1236 1339 1458 1459 1579 1601 1721 1864
10-Piston Design

MRTE10800 65920 (108024)

Benefits/Features
Hydraulically balanced 10 and 14-piston twin row design Wide range of displacements Starting torque from 91% theoretical Total efficiency up to 96% Speed feedback accessories optional

14-Piston Design

135

Motors (Mobile & Industrial)


MRT-MRTE-MRTF Low Speed High Torque Large Displacement Radial Piston Motors

Dimensions, inch (mm)


Series MRT7100 MRT9000 MRT1400 MRT17000 MRT19500 MRTE8500 MRTE10800 MRTE16500 MRTE20000 MRTE23000 MRTF7800 MRTF9900 MRTF1550 MRTF18000 MRTF21500 A 27106 (6885) 44705 (11355) C Max. 1969 (500) 315 (800) D 30157 (7660) 39921 (10140)

136

Motors

MRT-MRTE-MRTF Model Ordering Code

Motor Series Size & Displacement Shaft Speed Sensor Option Seals Connection Flange Rotation

Special (Entered by Factory)

Code MRT MRTE MRTF

Motor Series Standard 3626 PSI (2500 BAR) Max Continuous Expanded 3026 PSI (2086 BAR) Max Continuous Size & Displacement

Code N1 Q1 C1 T1 MRTE MRTF M1 B1 None Encoder Drive

Speed Sensor Option

Mechanized Tachometer Drive Tachometer Drive Incremental Elcis Encoder, Uni-directional* Incremental Elcis Encoder, Bi-directional*

Code 7100P 7800P 8500P 9000P 9800P 10800P 14000Q 15500Q 16500Q 17000Q 18000Q 19500Q 20000Q 21500Q 23000Q Code D1 F1

Displacement in3 (cm3) 4333 (7103) 4765 (7808) 5298 (8518) 5495 (9005) 6044 (9904) 6592 (10802) 8549 (14009) 8323 (15278) 10095 (16543) 10227 (16759) 11000 (18026) 11905 (19509) 12075 (19787) 12980 (21270) 14056 (23034)

MRT x

* 500 pulse/rev Code N1 F1 V1 U1 Code S1 G1 M1 Code N Standard Rotation (CW: Inlet in A; CCW: Inlet in B) Reversed Rotation (CW: Inlet in B; CCW: Inlet in A) Standard SAE Metric SAE 6000 PSI (4137 BAR) Metric SAE 6000 PSI (4137 BAR) Metric Special Timing Rotation NBR Mineral Oil NBR, 218 PSI (150 BAR) Shaft Seal Fluorocarbon No Shaft Seal (for Brake) Connection Flange Seals


Shaft

Spline DIN 5480 Female Spline DIN 5480

137

Motors (Mobile & Industrial)


MRD-MRDE, MRV-MRVE Low Speed High Torque Variable Displacement Radial Piston Motors
Performance Data
Series MRD300 MRD450 MRD700 MRD1100 MRD1800 MRD2800 MRD4500 MRDE330 MRDE500 MRDE800 MRDE1400 MRDE2100 MRDE3100 MRDE5400 MRV450 MRV700 MRV1100 MRV1800 MRV2800 MRV4500 MRVE800 MRVE1400 MRVE2100 MRVE3100 MRVE5400 Displacement in3/rev (cc/rev) 1856 (3041) 2756 (4516) 2756 (4516) 4314 (7069) 6870 (11258) 11043 (18096) 17038 (27920) 27477 (45027) 2028 (3324) 3038 (4979) 2028 (8042) 8357 (13695) 12761 (20912) 18940 (31037) 32960 (54012) Max. Pressure PSI (BAR) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 4350 (300) 3600 (250) 3600 (250) 3600 (250) 3600 (250) 3600 (250) 3600 (250) 3600 (250) Max. Speed RPM 1000 850 850 700 580 400 280 250 1000 800 650 550 370 280 210 Min-Max Torque (in-lb/PSI) 0123 0244 0183 0366 0107 0366 0275 0575 0412 0910 0733 1465 1130 2263 1823 3646 0135 0270 0201 0403 0313 0651 0501 1109 0847 1693 1257 2512 2187 4374

MRV450

Benefits/Features
5-piston design Displacement ratios of 1:2 or 1:3 Starting torque from 90-95% theoretical Total efficiency up to 96% Resistance to thermal shocks T = 176F Speed feedback accessories optional

138

Motors (Mobile & Industrial)


MRD-MRDE, MRV-MRVE Low Speed High Torque Variable Displacement Radial Piston Motors

Dimensions, inch (mm)


Series MRD300 MRDE330 MRD450 MRDE500 MRV450 MR*700 MR*E800 MR*1100 MR*E1400 MR*1800 MR*E2100 MR*2800 MR*E3100 MR*4500 MR*E5400 * MRD and MRV A 1110 (2819) 1295 (3289) 1606 (4079) 1374 (3490) 1579 (4011) 1709 (4341) 2071 (5260) 2071 (5260) C Max. 319 (810) 382 (970) 433 (1100) 398 (1011) 461 (1171) 520 (1321) 602 (1529) 827 (2101) D 1291 (3279) 1449 (3680) 1449 (3680) 1594 (4049) 1850 (4699) 2197 (5580) 2528 (6421) 3016 (7661)

139

MRD-MRDE, MRV-MRVE Model Ordering Code

Motor Series Size & Displacement Shaft Speed Sensor Option Seals Connection Flange Rotation

Motors

Special (Entered by Factory)

Code MRD MRDE MRV MRVE

Motor Series Dual, Standard 3626 PSI (2500 BAR) Max Continuous Dual, Expanded 3026 PSI (2086 BAR) Max Continuous Variable, Standard 3626 PSI (2500 BAR) Max Continuous Variable, Expanded 3026 PSI (2086 BAR) Max Continuous Size & Displacement

Code N1 Q1 C1 T1 M1 B1 None Encoder Drive

Speed Sensor Option

Mechanized Tachometer Drive Tachometer Drive Incremental Elcis Encoder, Uni-directional* Incremental Elcis Encoder, Bi-directional*

*500 pulse/rev Code MRV MRVE N1 F1 V1 U1 Code N1 C1 S1 T1 G1 L1 Code N Standard Rotation (CW: Inlet in A; CCW: Inlet in B) Reversed Rotation (CW: Inlet in B; CCW: Inlet in A) Standard Denison Calzoni Standard SAE Metric Standard SAE UNC SAE 6000 PSI (4137 BAR) Metric SAE 6000 PSI (4137 BAR) UNC Rotation NBR Mineral Oil NBR, 218 PSI (150 BAR) Shaft Seal Fluorocarbon No Shaft Seal (for Brake) Connection Flange None Seals

Code 300 D 150 330 D 165 450 E 133 450 E 225 500 E 250 700 F 235 800 F 270 1100 G 375 1400 G 450 1800 H 600 2100 H 700 2800 I 930 3100 I 1035 4500 L 1500 5400 L 1800 7000 M 2300 8200 M 2750 Code N1 D1 F1 P1 B1

Displacement in3/rev (cc/rev) 1856 / 928 (3041 / 1521) 2028 / 1014 (3324 / 1662) 2756 / 812 (4516 / 133) 2756 / 1378 (4516 / 2258) 3038 / 1519 (4979 / 2489) 4314 / 1438 (7069 / 2356) 4908 / 1636 (8042 / 2681) 6870 / 2290 (11258 / 3753) 8357 / 2786 (13695 / 4565) 11043 / 3681 (18096 / 6032) 12761 / 4254 (20912 / 6971) 17038 / 5679 (27920 / 9307) 18940 / 6314 (31037 / 10346) 27477 / 9159 (45027 / 15009) 32960 / 10987 (54012 / 18004) 42515 / 14172 (6967 / 23224) 50198 / 16733 (8226 / 27421)

MRD x

MRDE

Shaft

Spline Ex DIN 5463 Spline DIN 5480 Female Spline DIN 5480 Shaft with Key Spline BS 3550

140

Power Units
(M) = Mobile (I) = Industrial (B) = Mobile & Industrial (I) (I) (I) (I) D-Pak 5 Gallon 0.9 - 2.7 GPM H-Pak 10-40 Gallon, 0.9 - 9.6 GPM V-Pak 10-40 Gallon, 2 - 15.6 GPM V-Pak Low Profile 80 Gallon, 15-36 GPM

Page

143-144 145-152 145-152 145-152

Power Units (Industrial)


D-Pak 5 Gallon
D-Pak style power units are ideal for many industrial applications. The space saving vertical style units are available with gear pumps and are designed for quiet and leak-free operation. Standard Parker filtration on each unit will help ensure a long service life.

Power Unit Performance Data


Model Series D-Pak Tank (Gal) 5 Pump Flow, GPM (LPM) @ 1725 RPM 09 - 27 (34 - 102) Electric Motor HP (KW) 05 - 3 (037 - 224) Maximum Pressure PSI (BAR) 3000 (210)

Markets
Industrial

Applications
Presses, Shears, Test Equipment, Simulators

TOP VIEW

Features
Vertical design Submerged pump Spare return ports Precision pump mounting adapters Suction strainer Glycerine filled pressure gage with shut off Oil level gage with thermometer Relief valve Breather and fill cap SAE drain plug Parker connector technology

Benefits
Saves floor space Quieter operation, elimination of potential leak point Longer pump life Protects pump from contamination Improved diagnostics Helps to maintain trouble-free performance Protects against system shock Easy to fill reservoir Prevents leaks

381.0 (15.0) 317.5 (12.5)

317.5 (12.5)
T P

22.9 (.9)

FRONT VIEW

* Stainless units & other options available on request

269.75 (10.62) to 341.37 (13.44) depending on motor

263.1 (10.36)

143

307.9 (12.12)

D-Pak Model Ordering Code


D5
Reservoir 18.9 Liters (5 Gal) Code Omit B J Code 0.9 1.3 1.8 2.7 Code U1 T1 T3 G K 331-9110-267 331-9110-011 331-9110-010 331-9110-101 Electric Motor Description HP (KW) - RPM - Frame - Phase 5 (37) - 1725 - 56 C - 1 1 (75) - 1725 - 56 C - 1 1 (75) - 1725 - 56 C - 3 2 (15) - 1725 - 56 C - 3 3 (22) - 1725 - 56 C - 3 Code Pressure Control Pump Flow

Power Units
P

W
No Motor (See Note) ** Electric Motor Manifold Directional Control Valve *Manapak Control Valves Nominal Flow GPM (LPM) 7 (265) 7 (265) 7 (265)

Options and Accessories

Pressure Control System Pressure Relief Valve Only System Pressure Relief Valve with Unloading Valve (2-Way 120VAC) NO (Energize coil to close) System Pressure Relief Valve with Unloading Valve (2-Way 24VDC) NO (Energize coil to close) Pump Flow Used Code

Directional NFPA Control Valve Mounting Model Number Pad D1VW001CN*** D1VW004CN*** D1VW008CN*** D03 D03 D03

Description Double (Spr Ctr) Double (Spr Ctr) Double (Spr Ctr)

Circuit Symbol
A B

B C T

P T

A B

P T

A B

P T

Units less valves will be supplied with station cover plates installed Manapak Control Valves Function Flow Control Meter-Out Pilot Operator Check NFPA Valve Model Mounting Number Pad FM2DDKN CPOM2DDN D03 D03 Nominal Flow GPM (LPM) 7 (265) 7 (265)

Circuit Symbol
A B

1 3

Manapak valves mounted in order of callout First valve will be nearest DCV; last valve will be on manifold Code B1* Options and Accessories Function Exchanger Pressure Filter Model Number RM-08-2-2 Technical Data Air/Oil: 07 HP (52 kW) Rej @ 3 GPM (114 LPM) Microglass II Element Vis Ind 50 PSI (34 bar) Bypass 2 PSI (014 bar) Diff @ 3 GPM (114 LPM) 5 PSI (034 bar) Cracking Pressure 7 PSI (048 bar) Diff @ 3 GPM (114 LPM) 65 PSI (45 bar) Cracking Pressure Cellulose Element Ind Gage - 15 PSI (103 bar) Bypass Max Oil Flow Fixed Temp at 65C (149F) Close @ Low Level and/or 65C (149F) (NO) Fixed Temp at 65C (149F) Open @ Low Level and/or 65C (149F) (NC)

Single phase electric motors are rated as follows: 115/230V, 1PH, TEFC - 60 Hz 1800 RPM Three phase electric motors are rated as follows: 200-230/460V, 3PH, TEFC - 60 Hz 1800 RPM Consult factory for other motor speeds (RPM) and voltages ** Use W prefix when no motor is required on unit When ordering, W must be followed by motor model code equivalent Motor coupling will have interface for a 56C frame motor

15P110QXRS

Check Valve Pump Outlet

DT370MOMF05

Code

Porting Block/Subplate or Manifold Type Pressure and Return Port Block with Safety Relief Valve D03 Single Station Subplate with Safety Relief Valve D03 Multistation Parallel Circuit Manifold with Safety Relief Valve

Supply/Return Port or Actuator Port Size P & T Ports SAE-10 Str Thr'd A & B Ports SAE-8 Str Thr'd A & B Ports SAE-8 Str Thr'd

Other Convertible to S3 Option Spare P & T SAE-10 Ports Spare G Port SAE-6

Bypass Check (on Heat C1020S65 Exch) Return Filter Combination Float/Temp Switch NO Float Up Combination Float/Temp Switch Float Up 12AT10C 45LPM (12 GPM)

S3

R1

8767820-1

M33

R2

876782-02

Manifolds are mounted vertically Bottom station is number 1

*Heat rejection based on flow given with a 40F differential between transfer medium

= Omit if not required

144

Power Units
H-Pak & V-Pak
H-Pak and V-Pak style power units are ideal for many industrial applications. These space saving vertical style units are available with gear or piston pumps and are designed for quiet and leak-free operation. Standard Parker filtration on each unit will help ensure a long service life. Also available in V-Pak Low Profile.

V-Pak Low Profile

Performance Data
Model Series H-Pak V-Pak V-Pak Low Profile Tank (Gal) 10, 20, 30, 40 10, 20, 30, 40 80 Pump Flow, GPM (LPM) @ 1725 RPM 09 - 96 (22 - 363) 20 - 156 (76 - 591) 361 (1367) Electric Motor HP (KW) 05 - 20 (037 - 149) 2 - 20 (14 - 149) 75 - 40 (56 - 30) Max. Pressure PSI (BAR) 3000 (210) 3000 (210) 3000 (210)

Markets
Industrial

Applications
Presses, Shears, Test Equipment, Simulators

* Stainless units & other options available on request

145

Power Units
H-Pak and V-Pak
E F B

Low Profile V-Pak


TOP VIEW
B

G
PUMP PRIME

T P

SAFETY RELIEF DO NOT ADJUST

22.9 (.9)

FRONT VIEW

A*
A*
A-D03 B-D05 B-D03 A-D05

V-PAK

PUMP COMPENSATOR CONTROL

T P

Dimensions, inch (mm)


Series A* B* C D E F G H1/V1 105 (267) to 163 (414) 08 (19) 26 (67) 154 (390) 161 (410) 190 (483) 166 (422) 166 (422) H2/V2 105 (267) to 193 (492) 08 (19) to 34 (85) 194 (492) 195 (495) 225 (572) 200 (508) 200 (508) H3/V3 118 (298) to 193 (492) 08 (19) to 34 (85) 236 (600) 195 (495) 225 (572) 200 (508) 200 (508) H4/V4 118 (298) to 193 (492) 08 (19) to 34 (85) 289 (733) 195 (495) 225 (572) 200 (508) 200 (508) V8 166 (451) to 247 (627) 188 (48) to 57 (144) 286 (725) 360 (914) 390 (991) 323 (819) 346 (879)

* Depending on motor option Reference dimensions consult factory if critical to application

146

Power Units

H-Pak Model Ordering Code


W
Reservoir Pressure Control Pump Flow No Motor (See Note) ** Code U1* T1 T3 G K L M N P S Electric Motor Manifold

Code H1* H2 H3 H4 10 (379) 20 (757) 30 (1136) 40 (1514)

Reservoir Size Gallons (Liters)

Electric Motor Description HP (KW) - RPM - Frame - Phase 5 (37) - 1725 - 56C - 1 1 (75) - 1725 - 56C - 1 1 (75) - 1725 - 56C - 3 2 (15) - 1725 - 56C - 3 3 (22) - 1725 - 56C - 3 5 (375) - 1725 - 184TC - 3 75 (56) - 1725 - 213TC - 3 10 (75) - 1725 - 215TC - 3 15 (112) - 1725 - 254TC - 3 20 (149) - 1725 - 256TC - 3

*Available up to 75 KW (10 HP) motor only Code Omit B J Pressure Control* System Pressure Relief Valve Only System Pressure Relief Valve with Unloading Valve (2-Way 120VAC) NO (Energize coil to close) System Pressure Relief Valve with Unloading Valve (2-Way 24VDC) NO (Energize coil to close) Pump Flow Used 331-9110-267 331-9110-011 331-9110-010 331-9110-101 334-9111-069 334-9111-068 334-9111-067 334-9111-048 334-9111-065

* U1 leadtime is 2 weeks Single phase electric motors are rated as follows: 115/230V, 1PH, TEFC - 60 Hertz 1800 RPM Three phase electric motors are rated as follows: 208-230/460V, 3PH, TEFC - 60 Hertz 1800 RPM Consult factory for other motor speeds (RPM) and voltages Available with H2, H3 and H4 tanks only ** Use W prefix when no motor is required on unit When ordering, W must be followed by motor model code equivalent to frame size of motor to be used Supply/Return Port or Actuator Port Size P & T Ports SAE-10 Str Thr'd A & B Ports SAE-8 Str Thr'd A & B Ports SAE-10 Str Thr'd A & B Ports SAE-8 Str Thr'd A & B Ports SAE-8 Str Thr'd

Code 0.9 1.3 1.8 2.7 3.2 4.5 5.1 6.3 9.6

Code

Porting Block/Subplate or Manifold Type Pressure and Return Port Block with Safety Relief Valve D03 Single Station Subplate with Safety Relief Valve D05 Single Station Subplate with Safety Relief Valve D03 Multistation Parallel Circuit Manifold with Safety Relief Valve D05 Multistation Parallel Circuit Manifold with Safety Relief Valve

Other

Convertible to S3 Option Spare P & T SAE-10 Ports Spare P & T SAE-12 Ports Spare G Port SAE-6 Spare G Port SAE-6

S3

S5 M33 M35 M53 M55

Manifolds are mounted vertically Bottom station is number 1

= Omit if not required

147

H-Pak Model Ordering Code


P
Directional Control Valve *Manapak Control Valves Options and Accessories

Power Units

Code B C F G T W

Valve Model Number D1VW001CN*** D1VW004CN*** D3W1CN** D3W4CN** D1VW008CN*** D3W8CN**

NFPA Mounting Pad D03 D03 D05 D05 D03 D05

Nominal Flow GPM (LPM) 7 (265) 7 (265) 20 (757) 15 (568) 7 (265) 15 (568)

Description Double (Spr Ctr) Double (Spr Ctr) Double (Spr Ctr) Double (Spr Ctr) Double (Spr Ctr) Double (Spr Ctr)

Circuit Symbol
A B

P T

A B

P T

A B

P T

A B

P T

A B

P T

A B

P T

Units less valves wil be supplied with station cover plates installed Code 1 2 3 4 Function Flow Control Flow Control Valve Model Number FM2DDKN FM3DDKN NFPA Mounting Pad D03 D05 D03 D05 Nominal Flow GPM (LPM) 7 (265) 12 (454) 7 (265) 12 (454) Circuit Symbol
A B

Pilot Operator CPOM2DDN Check Pilot Operator CPOM3DDN Check

*Manapak valves mounted in order of callout First valve will be nearest DCV; last valve will be on manifold Code B1* B2* H K L O R1 Function Return Heat Exchanger Return Heat Exchanger Pressure Filter Check Valve Pump Outlet Bypass Check (on Heat Exch) Return Filter Combination Float/Temp Switch NO Float Up Combination Float/Temp Switch Float Up Model Number RM-08-1-2 RM 190-1-2 15P110QXRS "DT" & "C" Series C1220S65 12AT10C 12 GPM (45 LPM) 876782-01 Technical Data Air/Oil: 7 HP (052 kW), Rej @ 7 GPM (265 LPM) 037 - 37 kW Motors only Air/Oil: 15 HP (11 kW), Rej @ 7 GPM (265 LPM) 56 - 112 kW Motors only Microglass II Element, Vis Ind - 50 PSI (349 bar) Bypass - 4 PSI (027 bar), Diff @ 7 GPM (265 LPM) 5 PSI (034 bar) Cracking Pressure 25 PSI (172 bar) Diff @ 15 GPM (568 LPM) (65 PSI) 45 bar Cracking Pressure Cellulose Element, Ind Gage - 15 PSI (103 bar) Bypass Fixed Temp at 65C (149F) Close @ Low Level and/or 65C (149F) (NO) Fixed Temp at 65C (149F) Open @ Low Level and/or 65C (149F) (NC)

R2

876782-02

*Heat rejection based on flow given with a 40F differential between transfer medium

= Omit if not required

148

Power Units

V-Pak Model Ordering Code


OR Reduced Flow Reservoir Pressure Control Pump Control Pump Flow

W
No Motor (See Note) ** Electric Motor Manifold

Code V1* V2 V3 V4

Reservoir Size Gallons (Liters) 10 (379) 20 (757) 30 (1136) 40 (1514)

Code G K L M N P S

Electric Motor Description HP (KW) - RPM - Frame - Phase 2 (15) - 1725 - 56C - 3 3 (22) - 1725 - 56C - 3 5 (375) - 1725 - 184TC - 3 75 (56) - 1725 - 213TC - 3 10 (75) - 1725 - 215TC - 3 15 (112) - 1725 - 254TC - 3 20 (149) - 1725 - 256TC - 3

*Available up to 10 HP (75 kW) motor only Code Omit B BJ C CJ D DJ F Code Omit A* H** Pressure Control Single Pressure Remote Compensator Single Pressure Remote Compensator with Low Pressure Standby Single Pressure Remote Compensator with Low Pressure Standby, 24 VDC Bi-Pressure Remote Compensator Bi-Pressure Remote Compensator, 24VDC Bi-Pressure Remote Compensator with Low Pressure Standby Bi-Pressure Remote Compensator with Low Pressure Standby, 24VDC Provision for Customer Supplied Remote Control Relief Valve Pump Control Std Remote Compensator Load Sense Flow Control Horsepower Limiting

Electric motors are 208-230/460V, 60 Hz 3PH 1800 RPM TEFC Consult factory for other motor speeds (RPM) and voltages Available with V2, V3 and V4 tanks only ** Use W prefix when no motor is required on unit When ordering, W must be followed by motor model code equivalent to frame size of motor to be used Supply/Return Port or Actuator Port Size P & T Ports SAE-10 Str Thr'd A & B Ports SAE-8 Str Thr'd A & B Ports SAE-10 Str Thr'd A & B Ports SAE-8 Str Thr'd A & B Ports SAE-8 Str Thr'd

Code

Porting Block/Subplate or Manifold Type Pressure and Return Port Block with Safety Relief Valve D03 Single Station Subplate with Safety Relief Valve D05 Single Station Subplate with Safety Relief Valve D03 Multistation Parallel Circuit Manifold with Safety Relief Valve D05 Multistation Parallel Circuit Manifold with Safety Relief Valve

Other Convertible to S3 Option Spare P & T SAE-10 Ports Spare P & T SAE-12 Ports Spare G Port SAE-6 Spare G Port SAE-6

S3

S5 M33 M35 M53 M55

*A_SAE-6 sense port line will be supplied in topplate ** Horsepower setting will be at max flow & pressure obtainable with motor selected Lead time is four weeks for shaded items Code 7 * 15 ** Pump Flow Rate @1800 RPM 7 GPM (295 LPM) Specify in GPM 156 GPM (59 LPM) Specify in GPM Pump Used and Description PVP16 - Std Remote Compensator Destroked Max Volume 2 GPM Min PVP33 - Std Remote Compensator Destroked Max Volume 8 GPM Min

Manifolds are mounted vertically Bottom station is number 1

*Unless otherwise specified, units are shipped at max flow rate 78 GPM (295 LPM) at 1800 RPM When reduced flow setting is required, specify pump setting in 5 GPM (19 LPM) increments Example: 5, 55, 6, 65 with a 2 GPM (76 LPM) minimum flow **Unless otherwise specified, units are shipped at max flow rate 156 GPM (59 LPM) at 1800 RPM When reduced flow setting is required, specify pump setting in 5 GPM (19 LPM) increments Example: 11, 115, 12, 125 with a 8 GPM (303 LPM) minimum flow Example: V*12**-= Std Pump Destroked to 12 GPM (454 LPM) V*A115**-- = Load Sense Pump Destroked to 115 GPM (435 LPM)

= Omit if not required

149

V-Pak Model Ordering Code


continued on next page

Power Units

P
Directional Control Valve *Manapak Control Valves Options and Accessories

Code B C F G

Directional Control Valve Model Number D1VW001CN*** D1VW004CN*** D3W1CN** D3W4CN**

NFPA Mounting Pad D03 D03 D05 D05

Nominal Flow GPM (LPM) 7 (265) 7 (265) 20 (757) 15 (568)

Description Double (Spr Ctr) Double (Spr Ctr) Double (Spr Ctr) Double (Spr Ctr)

Circuit Symbol
A B

P T

A B

P T

A B

P T

A B

P T

Units less valves wil be supplied with station cover plates installed Manapak Control Valves Function Flow Control Flow Control Pilot Operator Check Pilot Operator Check NFPA Mounting Pad D03 D05 D03 D05

Code

Valve Model Number FM2DDKN FM3DDKN CPOM2DDN CPOM3DDN

Nominal Flow GPM (LPM) 7 (265) 12 (454) 7 (265) 12 (454)

Circuit Symbol
A B

1 2 3 4

*Manapak valves mounted in order of callout First valve will be nearest DCV; last valve will be on manifold Code A* B1* B2* H K L N O R1 Options and Accessories Function Pump Case Heat Exchanger Return Heat Exchanger Return Heat Exchanger Pressure Filter Check Valve Pump Outlet Bypass Check (on Heat Exch) Return Filter Return Filter Combination Float/Temp Switch NO Float Up Combination Float/Temp Switch Float Up Model Number RM-08-4-2 RM-08-1-2 RM 190-1-2 15P110QXRS "DT" & "C" Series C1220S65 40CN110B 12AT10C 12 GPM (45 LPM) 876782-01 Technical Data Air/Oil: 07 HP (052 kW), Rej @ 5 GPM (19 LPM) 2-15 HP (15 - 112 kW) Motors Air/Oil: 07 HP (052 kW), Rej @ 7 GPM (265 LPM) 2-5 HP (15 - 37 kW) Motors only Air/Oil: 15 HP (11 kW), Rej @ 7 GPM (265 LPM) 75-15 HP (56 - 112 kW) Motors only Microglass II Element, Vis Ind - 50 PSI (349 bar) Bypass - 4 PSI (027 bar), Diff @ 7 GPM (265 LPM) 5 PSI (034 bar) Cracking Pressure 25 PSI (172 bar) Diff @ 15 GPM (568 LPM) (65 PSI) 45 bar Cracking Pressure Microglass II Element, Visual 25 PSI (172 bar) Indicator 3 PSI (021 bar) Diff @ 7 GPM (265 LPM) Cellulose Element, Ind Gage - 15 PSI (103 bar) Bypass Fixed Temp at 65C (149F) Close @ Low Level and/or 65C (149F) (NO) Fixed Temp at 65C (149F) Open @ Low Level and/or 65C (149F) (NC)

R2

876782-02

*Heat rejection based on flow given with a 40F differential between transfer medium

= Omit if not required

150

Power Units
V8
Reservoir Size 80 Gallons (302.8 Liters) Pressure Control

V-Pak Model Ordering Code


OR Reduced Flow Pump Control Pump Flow

W
No Motor (See Note) ** Electric Motor Manifold

Code Omit B BJ C CJ D DJ F Code Omit A* Load Sense Flow Control

Pressure Control Single Pressure Remote Compensator Single Pressure Remote Compensator with Low Pressure Standby Single Pressure Remote Compensator with Low Pressure Standby, 24 VDC Bi-Pressure Remote Compensator Bi-Pressure Remote Compensator, 24VDC Bi-Pressure Remote Compensator with Low Pressure Standby Bi-Pressure Remote Compensator with Low Pressure Standby, 24VDC Provision for Customer Supplied Remote Control Relief Valve Pump Control Std Remote Compensator

Code M N P S Q R V

Electric Motor Description HP (kW) - RPM - Frame - Type 75 (56) - 1800 - 213TC - TEFC 10 (75) - 1800 - 215TC - TEFC 15 (112) - 1800 - 254TC - TEFC 20 (149) - 1800 - 256TC - TEFC 25 (186) - 1800 - 284TC - TEFC 30 (224) - 1800 - 286T - TEFC 40 (298) - 1800 - 324T - TEFC

Electric motors are 230/460V, 60 Hz 3PH Consult factory for other motor speeds (RPM) and voltages **Use W prefix when no motor is required on unit When ordering, W must be followed by motor model code equivalent to frame size of motor to be used Example: V815WM*** = 3028 L (80 gal) reservoir, std PVP33 unit to accept a 75 HP (56KW)/213TC C-face frame motor Porting Block/Subplate or Manifold Type Pressure and Return Port Block with Safety Relief Valve D05 Single Station Subplate with Safety Relief Valve D05 Multistation Parallel Circuit Manifold with Safety Relief and Pump Compensator Valves D08 Two Parallel Circuit Manifold with Safety Relief and Pump Compensator Valves Supply/Return Port or Actuator Port Size P Port SAE-16 T Port SAE-20 A & B Ports SAE-10 Str Thr'd A & B Ports SAE-8 Str Thr'd

*Unless otherwise specified, a SAE-6 37 flared port will be supplied for customer connection **Consult factory for horsepower and hi-lo pump control options Lead time is four weeks Code 15 23 36 * Pump Flow Rate @1800 RPM 156 GPM (59 LPM) 230 GPM (87 LPM) 361 GPM (137 LPM) Specify in GPM Pump Used and Description PVP33 - Std Remote Compensator PVP48 - Std Remote Compensator PVP76 - Std Remote Compensator Destroked (Reduced) Flow

Code

Other

O S5

None None

M5* (2)

None Y Port SAE-8 Str Thr'd

*Unless otherwise specified, units are shipped at max flow rate (GPM) at 1800 RPM When reduced flow setting is required, Reduced flows from 225 to 80 GPM (852 to 303 LPM), specify in 05 GPM increments Reduced flows from 350 to 240 GPM (1325 to 908 LPM), specify in 10 GPM (38 LPM) increments Example: V*95**-- = PVP33 Pump destroked to 95 GPM (360 LPM) V*A31**-- = PVP76 Load Sense Pump destroked to 310 GPM (1773 LPM)

M82 (3)

A & B Ports SAE-16 Str Thr'd

*When ordering Multi-Station Manifolds, the number of stations must be specified If valves are to be mounted, specify the valves and sequence, if the model code exceeds 25 digits, call factory Example: V815QM53BCB1 Example: V815QM55B1B1CBC 3 Station D05 Manifold 5-Station D05 Manifold Station #1: B Station #1: B1 Station #2: C Station #2: B1 Station #3: B1 Station #3: C Station #4: B Station #5: C

NOTE: 1 Manifolds are mounted vertically Bottom station is number 1 2 M5-3 and 5 station available M8-2 station available

= Omit if not required

151

V-Pak Model Ordering Code


P
Directional Control Valve *Manapak Control Valves Options and Accessories

Power Units

Code

Directional Control Valve Valve Model Number D1VW001CN*** D1VW004CN*** Manapak Control Valves Function Flow Control

NFPA Mounting Pad D03 D03

Nominal Flow GPM (LPM) 7 (265) 7 (265)

Description Double (Spr Ctr) Double (Spr Ctr)

Circuit Symbol
A B

B C

P T

A B

P T

Code

Valve Model Number FM2DDKN

NFPA Mounting Pad D03 D03

Nominal Flow GPM (LPM) 7 (265) 7 (265)

Circuit Symbol
A B

1 3

Pilot Operator CPOM2DDN Check

*Manapak valves mounted in order of callout First valve will be nearest DCV; last valve will be on manifold Code A* B* C* H K L N QS R1 Options and Accessories Function Continuous Pump Case Cooling Continuous Pump Case Cooling Filter/Cooling Loop Pressure Filter Check Valve Pump Outlet Bypass Check Return Filter Return Filter Combination Float/Temp Switch NO Float Up Combination Float/Temp Switch NC Float Up Model Number RM-08-2-2 RM-19-2-2 ACC-22-2-1PH 40CN205Q P210QM250NN1 493-16-D1-2 C2020S65 40CN210Q 80CN110QE2GS24-4 877501 Technical Data Air/Oil: Max Oil Flow 45 GPM (17 LPM), 08 HP (06 kW) Heat Rejection Air/Oil: Max Oil Flow 45 GPM (17 LPM) 15 HP (11 kW) Heat Rejection Air Oil w/1 PH Motor: Oil Flow 45 GPM (17 LPM), 45 HP (33 kW) Heat Rejection 10 Micron Microglass II Dual Element, Mechanical Indicator 5 PSI (03 bar) Cracking Pressure 65 PSI (46 bar) Cracking Pressure 10 Micron Microglass II Dual Element, Mechanical Indicator** (8 PSID) 10 Micron Microglass II Single Element Electrical Indicator (25 PSI) Fixed Temp at 65C (149F) Close @ Low Level and/or 65C (149F) (NO) Fixed Temp at 65C (149F) Open @ Low Level and/or 65C (149F) (NC)

R2

877502

*Heat rejection data is based on 100 SSU oil leaving the cooler 22C (72F) higher than the ambient air temperature used for cooling Option A available from 75 HP (06 KW) thru 25 HP (185 KW) Option C not available with option A or B **Based on max 36 GPM (136 LPM) w/150 SUS oil

= Omit if not required

152

Reference
(M) = Mobile (I) = Industrial (B) = Mobile & Industrial SAE Flanges and Shafts Formulas & Conversions Offer of Sale

Page

155 156 157

SAE Flanges & Shafts


Mounting Bolt Circle Mounting Hole Diameter

Mounting Hole Diameter Mounting Bolt Circle

NFPA Standard Two-Bolt Pump/Motor Mounting Flanges


Flange Code 50-2 82-2 101-2 127/2 152-2 165-2 177-2 SAE No. N/A A B C D E F SAE hp Rating1 N/A 10 25 50 100 200 300 Mtg. Bolt Circle 3Zv 4Czn 5Cv 7Z, 9 12Zx 13XBcx Mtg. Hole Dia. ZCcx Mzn >zn ZZzn ZCzn 1Zzn 1Zzn Pilot Dia. 1 3Zv 4 5 6 6Zx 7 Pilot Ht. Zv Zv C, Zx Zx B, B,

NFPA Standard Four-Bolt Pump/Motor Mounting Flanges


Flange Code 101-4 127-4 152-4 165-4 177-4
1

SAE No. B C D E F

SAE hp Rating1 25 50 100 200 300

Mtg. Bolt Circle 5 6C, 9 12Z|x 13XBcx

Mtg. Hole Dia. >zn ZZzn ZCzn 1Zzn 1Zzn

Pilot Dia. 4 5 6 6Zx 7

Pilot Ht. C, Zx Zx B, B,

1750 rpm electric motor

Shaft Diameter Shaft Diameter Shaft Length Shaft Length

NFPA Standard Straight Shafts without Thread


Shaft Code 13-1 16-1 22-1 25-1 32-1 38-1 44-1 SAE Ref.2 N/A A B B-B C C-C D, E Shaft Dia. Zx B, M, 1 1Zv 1Zx 1Cv Short Shaft Length Cv ZBzn 1Bzn 1Zx 1M, 2Z, 2B, Long Shaft Length N/A 2 2Zx 2Cv 3 3Zv 3B, Key Width Z, Bcx Zv Zv Bzn C, Mzn
2

NFPA Standard 30 Involute Spline Shafts


Shaft Code 13-4 16-4 22-4 25-4 32-4 38-4 44-4 50-4 SAE Ref.2 N/A A B B-B C C-C D, E N/A Shaft Dia. Zx B, M, 1 1Zv 1Zx 1Cv 2 Shaft Length Cv ZBzn 1Bzn 1Zx 1M, 2Z, 2B, 3Z, Spline Specifications 9T, 20/40 DP 9T, 16/32 DP 13T, 16/32 DP 15T, 16/32 DP 14T, 12/24 DP 17T, 12/24 DP 13T, 8/16 DP 15T, 8/16 DP

Indicates matching SAE front flange for each shaft diameter.

155

Formulas & Conversions


Formulas
PRESSURE (psi) FLOW RATE (gpm) HORSEPOWER (hp) VELOCITY SPECIFIC GRAVITY FLOW (gpm) HORSEPOWER INPUT OVERALL EFFICIENCY (%) OVERALL EFFICIENCY (%) = = = = = = = = = FORCE (pounds) UNIT AREA (square inches) VOLUME (gallons) UNIT TIME (minutes) PRESSURE (psig) FLOW (gpm) 1714 0.3208 FLOW RATE THROUGH I.D. (gpm) INTERNAL AREA (square inches) WEIGHT OF ONE CUBIC FOOT OF FLUID WEIGHT OF ONE CUBIC FOOT OF WATER RPM PUMP DISPLACEMENT (in /rev)
3

CYLINDER AREA (in2)

= = p 4

p RADIUS2 (inches) DIAMETER (inches)


2

CYLINDER FORCE (lbs) CYLINDER VELOCITY (ft/sec) CYLINDER VOLUME CYLINDER FLOW RATE (gpm) TORQUE (in-lbs)

= = = = = = =

PRESSURE (psig) NET AREA (in2) 231 FLOW RATE (gpm) 12 60 NET AREA (in2) p RADIUS2 (in) STROKE (in) 231 12 60 VELOCITY (ft/sec) NET AREA (in2) 231 PRESSURE (psig) F.M. DISPLACEMENT (in3/rev) 2p HORSEPOWER 63025 RPM FLOW RATE (gpm) PRESSURE (psig) 36.77 RPM F.M. DISPLACEMENT (in3/rev) 0.0628 231 FLOW RATE (gpm) F.M. DISPLACEMENT (in3/rev) TORQUE OUTPUT (in-lbs) RPM 63025 LEVER LENGTH (inch) PULL (lbs) ID2 0.7854 0.3208 FLOW (gpm) AREA OF PASSAGE (in2)

231 FLOW RATE OUTPUT (gpm) PRESSURE (psig) 1714 EFFICIENCY OUTPUT HORSEPOWER INPUT HORSEPOWER 100

VOLUMETRIC EFF. MECHANICAL EFF. ACTUAL FLOW RATE OUTPUT (gpm) THEORETICAL FLOW RATE OUTPUT (gpm) ACTUAL TORQUE TO DRIVE 100

TORQUE/100 psig (in-lbs) SPEED (RPM)

= = = = = =

VOLUMETRIC EFFICIENCY (%) = MECHANICAL EFFICIENCY (%) = B10 BEARING LIFE (hr) DISPLACEMENT (cir) TORQUE (in-lbs) TORQUE (in-lbs)

RATED LIFE RATED SPEED (rpm) RATED PRESSURE (psig) = (hr) NEW SPEED (rpm) NEW PRESSURE (psig) = = = FLOW RATE (gpm) 231 PUMP RPM HORSEPOWER 63025 RPM PRESSURE (psig) PUMP DISPLACEMENT (in3/rev) 2p

MOTOR HORSEPOWER (hp) TORQUE (in-lbs) PISTON AREA (in2) VELOCITY

The Universal Gas Law


P1V1T2 = P2V2T1

Electric Motors
INPUT HP TO ELEC. MOTOR WATTS = = PUMP INPUT HP ELECTRIC MOTOR EFFICIENCY ELECTRIC MOTOR INPUT HP 746

Common Conversions
To Convert BAR cc C KG KW liters mm Nm Into PSI in
3

Multiply by 14.5 0.06102 (C 9/5) + 32 2.205 1.341 0.2642 0.03937 0.7375

To Convert PSI in
3

Into BAR cc C Kg KW liters mm Nm

Multiply by 0.06896 16.39 (F - 32) / 1.8 0.4535 0.7457 3.785 25.4 1.356

E = IR where: E = VOLTAGE

POWER (W) = I E I = CURRENT

POWER (W) = I2 E R = RESISTANCE W = WATTS

F lbs HP gallons inches lb-ft

F lbs HP gallons inch lb-ft

SERIES E Total = Er1 = Er2 + Er3 I Total = Ir1 = Ir2 = Ir3 R Total = R1 + R2 + R3

PARALLEL E Total = Er1 + Er2 = Er3 I Total = Ir1 + Ir2 + Ir3 R Total = 1 1 1 1 R1 + R2 + R3

Thermal Formulas
NOTE: ONE BRITISH THERMAL UNIT (BTU) IS THE AMOUNT OF HEAT REQUIRED TO RAISE THE TEMPERATURE OF ONE POUND OF WATER 1 FAHRENHEIT. ONE HORSEPOWER = 2545 BTU/HR. RESERVOIR COOLING CAPACITY BASED ON ADEQUATE AIR CIRCULATION HEAT IN HYDRAULIC OIL (approx.) DUE TO SYSTEM INEFFICIENCY (SG = 0.89 - 0.92 HEAT (BTU/HR) = 2 TEMPERATURE DIFFERENCE BETWEEN RESERVOIR WALLS AND AIR (F) AREA OF RESERVOIR (sq. ft.) HEAT (BTU/HR) = FLOW RATE (gpm) 210 TEMPERATURE DIFFERENCE (F) BTU/HR = 2.0 pT A BTU/HR = Q 210 pT

156

Offer of Sale
The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, Hydraulics Group, and its authorized distributors (Seller) are hereby offered for sale at prices to be established by Seller This offer and its acceptance by any customer (Buyer) shall be governed by all of the following Terms and Conditions Buyers order for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer All goods or work described will be referred to as Products 1. Terms and Conditions. Sellers willingness to offer Products, or accept an order for Products, to or from Buyer is expressly conditioned on Buyers assent to these Terms and Conditions and to the terms and conditions found on-line at wwwparker com/saleterms/ Seller objects to any contrary or additional term or condition of Buyers order or any other document issued by Buyer 2. Price Adjustments; Payments. Prices stated on the reverse side or preceding pages of this document are valid for 30 days After 30 days, Seller may change prices to reflect any increase in its costs resulting from state, federal or local legislation, price increases from its suppliers, or any change in the rate, charge, or classification of any carrier The prices stated on the reverse or preceding pages of this document do not include any sales, use, or other taxes unless so stated specifically Unless otherwise specified by Seller, all prices are FOB Sellers facility, and payment is due 30 days from the date of invoice After 30 days, Buyer shall pay interest on any unpaid invoices at the rate of 15% per month or the maximum allowable rate under applicable law 3. Delivery Dates; Title and Risk; Shipment. All delivery dates are approximate and Seller shall not be responsible for any damages resulting from any delay Regardless of the manner of shipment, title to any products and risk of loss or damage shall pass to Buyer upon tender to the carrier at Sellers facility (ie, when its on the truck, its yours) Unless otherwise stated, Seller may exercise its judgment in choosing the carrier and means of delivery No deferment of shipment at Buyers request beyond the respective dates indicated will be made except on terms that will indemnify, defend and hold Seller harmless against all loss and additional expense Buyer shall be responsible for any additional shipping charges incurred by Seller due to Buyers changes in shipping, product specifications or in accordance with Section 13, herein 4. Warranty. Seller warrants that the Products sold hereunder shall be free from defects in material or workmanship for a period of eighteen months from the date of delivery to Buyer The prices charged for Sellers products are based upon the exclusive limited warranty stated above, and upon the following disclaimer: DISCLAIMER OF WARRANTY: THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO PRODUCTS PROVIDED HEREUNDER SELLER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 5. Claims; Commencement of Actions. Buyer shall promptly inspect all Products upon delivery No claims for shortages will be allowed unless reported to the Seller within 10 days of delivery No other claims against Seller will be allowed unless asserted in writing within 60 days after delivery or, in the case of an alleged breach of warranty, within 30 days after the date within the warranty period on which the defect is or should have been discovered by Buyer Any action based upon breach of this agreement or upon any other claim arising out of this sale (other than an action by Seller for any amount due to Seller from Buyer) must be commenced within thirteen months from the date of tender of delivery by Seller or, for a cause of action based upon an alleged breach of warranty, within thirteen months from the date within the warranty period on which the defect is or should have been discovered by Buyer 6. LIMITATION OF LIABILITY. UPON NOTIFICATION, SELLER WILL, AT ITS OPTION, REPAIR OR REPLACE A DEFECTIVE PRODUCT, OR REFUND THE PURCHASE PRICE IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF, OR AS THE RESULT OF, THE SALE, DELIVERY, NONDELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS OR ANY PART THEREOF, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT SELLERS WRITTEN CONSENT, EVEN IF SELLER HAS BEEN NEGLIGENT, WHETHER IN CONTRACT, TORT OR OTHER LEGAL THEORY IN NO EVENT SHALL SELLERS LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED THE PURCHASE PRICE OF THE PRODUCTS 7. Contingencies. Seller shall not be liable for any default or delay in performance if caused by circumstances beyond the reasonable control of Seller 8. User Responsibility. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and Product and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met The user must analyze all aspects of the application and follow applicable industry standards and Product information If Seller provides Product or system options, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the Products or systems 9. Loss to Buyers Property. Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer or any other items which become Buyers property, may be considered obsolete and may be destroyed by Seller after two consecutive years have elapsed without Buyer placing an order for the items which are manufactured using such property Seller shall not be responsible for any loss or damage to such property while it is in Sellers possession or control 10. Special Tooling. A tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture Products Such special tooling shall be and remain Sellers property notwithstanding payment of any charges by Buyer In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the Products, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by Buyer Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time 11. Buyers Obligation; Rights of Seller. To secure payment of all sums due or otherwise, Seller shall retain a security interest in the goods delivered and this agreement shall be deemed a Security Agreement under the Uniform Commercial Code Buyer authorizes Seller as its attorney to execute and file on Buyers behalf all documents Seller deems necessary to perfect its security interest Seller shall have a security interest in, and lien upon, any property of Buyer in Sellers possession as security for the payment of any amounts owed to Seller by Buyer 12. Improper Use and Indemnity. Buyer shall indemnify, defend, and hold Seller harmless from any claim, liability, damages, lawsuits, and costs (including attorney fees), whether for personal injury, property damage, patent, trademark or copyright infringement or any other claim, brought by or incurred by Buyer, Buyers employees, or any other person, arising out of: (a) improper selection, improper application or other misuse of Products purchased by Buyer from Seller; (b) any act or omission, negligent or otherwise, of Buyer; (c) Sellers use of patterns, plans, drawings, or specifications furnished by Buyer to manufacture Product; or (d) Buyers failure to comply with these terms and conditions Seller shall not indemnify Buyer under any circumstance except as otherwise provided 13. Cancellations and Changes. Orders shall not be subject to cancellation or change by Buyer for any reason, except with Sellers written consent and upon terms that will indemnify, defend and hold Seller harmless against all direct, incidental and consequential loss or damage Seller may change product features, specifications, designs and availability with notice to Buyer 14. Limitation on Assignment. Buyer may not assign its rights or obligations under this agreement without the prior written consent of Seller 15. Entire Agreement. This agreement contains the entire agreement between the Buyer and Seller and constitutes the final, complete and exclusive expression of the terms of the agreement All prior or contemporaneous written or oral agreements or negotiations with respect to the subject matter are herein merged 16. Waiver and Severability. Failure to enforce any provision of this agreement will not waive that provision nor will any such failure prejudice Sellers right to enforce that provision in the future Invalidation of any provision of this agreement by legislation or other rule of law shall not invalidate any other provision herein The remaining provisions of this agreement will remain in full force and effect 17. Termination. This agreement may be terminated by Seller for any reason and at any time by giving Buyer thirty (30) days written notice of termination In addition, Seller may by written notice immediately terminate this agreement for the following: (a) Buyer commits a breach of any provision of this agreement (b) the appointment of a trustee, receiver or custodian for all or any part of Buyers property (c) the filing of a petition for relief in bankruptcy of the other Party on its own behalf, or by a third party (d) an assignment for the benefit of creditors, or (e) the dissolution or liquidation of the Buyer 18. Governing Law. This agreement and the sale and delivery of all Products hereunder shall be deemed to have taken place in and shall be governed and construed in accordance with the laws of the State of Ohio, as applicable to contracts executed and wholly performed therein and without regard to conflicts of laws principles Buyer irrevocably agrees and consents to the exclusive jurisdiction and venue of the courts of Cuyahoga County, Ohio with respect to any dispute, controversy or claim arising out of or relating to this agreement Disputes between the parties shall not be settled by arbitration unless, after a dispute has arisen, both parties expressly agree in writing to arbitrate the dispute 19. Indemnity for Infringement of Intellectual Property Rights. Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Section Seller will defend and indemnify Buyer against allegations of infringement of US patents, US trademarks, copyrights, trade dress and trade secrets (Intellectual Property Rights) Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that a Product sold pursuant to this Agreement infringes the Intellectual Property Rights of a third party Sellers obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise If a Product is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using the Product, replace or modify the Product so as to make it noninfringing, or offer to accept return of the Product and return the purchase price less a reasonable allowance for depreciation Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to Products delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any Product sold hereunder The foregoing provisions of this Section shall constitute Sellers sole and exclusive liability and Buyers sole and exclusive remedy for infringement of Intellectual Property Rights 20. Taxes. Unless otherwise indicated, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of Products 21. Equal Opportunity Clause. For the performance of government contracts and where dollar value of the Products exceed $10,000, the equal employment opportunity clauses in Executive Order 11246, VEVRAA, and 41 CFR 60-14(a), 60-7415(a), and 60-2504, are hereby incorporated

157

System Requirements
To view the DVD, the following are required:
Pentium 3-class processor Win 2000, Win XP, Win Vista or Win 7 32 MB of RAM 1 GB of available hard-disk space DVD player

To View the DVD


The DVD is self-loading. Just place it in your DVD drive. Acrobat Reader will open (or install), and the opening page will appear on your monitor. From this page you can navigate to the following sections.
Search* takes you to the search feature. When the search window opens, type a word(s) or code* and press enter. A list of pages where that word appears is shown. Select one and click the View button. Repeat as needed. Product Information or Contents takes you to the selection of catalogs and products on the DVD. Product Overview takes you to a .pdf file of this Hydraulic Pump Division Product Range. Warning/Offer of Sale takes you to these legal documents. Getting Started provides a summary of how to navigate using Acrobat Reader. Contact Us provides you with phone, fax and online information.

Acrobat Reader
Catalog files are viewed using Adobe Acrobat Reader. If you do not have Acrobat Reader installed on your PC, Win Vista, Win 7 and most Win XP systems will give you an web install option for Acrobat Reader on the bottom of the DVD install menu. You must have Acrobat 6.0 or higher to take advantage of the search feature described in the next section.

Text links are easily identified by blue type. The catalog files are fully bookmarked to make navigation quick and easy. Each catalog also has a bookmark which will take you to the Parker web home page if you are online while you are viewing the DVD.
Adobe and Acrobat are registered trademarks of Adobe Systems Inc. Windows is a registered trademark of Microsoft Corp.

2012 Parker Hannifin Corporation, all rights reserved

Catalog HY28-2673-01/HPD/US 50 3/12 GL

Parker Hannifin Corporation Hydraulics Pump Division 14249 Industrial Parkway Marysville, OH 43040 Tel: 937-644-4532 Fax: 937-642-3639 www.phpump.com

Vous aimerez peut-être aussi