Académique Documents
Professionnel Documents
Culture Documents
(604) 614-3530
www.fleetmanconsulting.com
OPTIONS
A
A) ALUMINUM BRIDGE WL-SATB B) STEEL BRIDGE WL-SSTB
MODEL NUMBER
PLATFORM SIZE (W x L)
WL-100-5-48 WL-100-5-68 WL-100-5-78 WL-100-5-88* WL-100-5-610 WL-100-5-710 WL-100-5-810* WL-100-6-68 WL-100-6-78 WL-100-6-88* WL-100-6-610 WL-100-6-710 WL-100-6-810* WL-100-8-68 WL-100-8-78 WL-100-8-88* WL-100-8-610 WL-100-8-710 WL-100-8-810* WL-100-10-68 WL-100-10-78 WL-100-10-88* WL-100-10-610 WL-100-10-710 WL-100-10-810* WL-100-10-612 WL-100-10-712 WL-100-10-812* WL-100-12-68 WL-100-12-78 WL-100-12-88* WL-100-12-610 WL-100-12-710 WL-100-12-810* WL-100-12-612 WL-100-12-712 WL-100-12-812*
48" x 96" 72" x 96" 84" x 96" 96" x 96" 72" x 120" 84" x 120" 96" x 120" 72" x 96" 84" x 96" 96" x 96" 72" x 120" 84" x 120" 96" x 120" 72" x 96" 84" x 96" 96" x 96" 72" x 120" 84" x 120" 96" x 120" 72" x 96" 84" x 96" 96" x 96" 72" x 120" 84" x 120" 96" x 120" 72" x 144" 84" x 144" 96" x 144" 72" x 96" 84" x 96" 96" x 96" 72" x 120" 84" x 120" 96" x 120" 72" x 144" 84" x 144" 96" x 144"
8" 8" 8" 8" 8" 8" 8" 10" 10" 10" 10" 10" 10" 10" 10" 10" 10" 10" 10" 14" 14" 14" 14" 14" 14" 14" 14" 14" 14" 14" 14" 14" 14" 14" 14" 14" 14"
68" 68" 68" 68" 68" 68" 68" 70" 70" 70" 70" 70" 70" 70" 70" 70" 70" 70" 70" 72" 72" 72" 72" 72" 72" 72" 72" 72" 72" 72" 72" 72" 72" 72" 72" 72" 72"
5,000 5,000 5,000 5,000 5,000 5,000 5,000 6,000 6,000 6,000 6,000 6,000 6,000 8,000 8,000 8,000 8,000 8,000 8,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 12,000 12,000 12,000 12,000 12,000 12,000 12,000 12,000 12,000
41" x 93" 62" x 93" 62" x 93" 86" x 93" 62" x 118" 62" x 118" 86" x 118" 62" x 93" 62" x 93" 86" x 93" 62" x 118" 62" x 118" 86" x 118" 62" x 93" 62" x 93" 86" x 93" 62" x 118" 62" x 118" 86" x 118" 62" x 93" 62" x 93" 86" x 93" 62" x 118" 62" x 118" 86" x 118" 62" x 118" 62" x 118" 86" x 118" 62" x 93" 62" x 93" 86" x 93" 62" x 118" 62" x 118" 86" x 118" 62" x 118" 62" x 118" 86" x 118"
3125 3485 3706 3952 3823 4027 4107 3648 3788 4167 3939 4038 4301 4396 4592 4698 4807 4913 5157 5804 5991 6177 6037 6224 6410 6504 6690 6876 6387 6573 6731 6620 6807 6993 7098 7225 7436
New
*Units 96" wide cannot ship LTL. These sizes will ship either flat bed or in an oversized swing door trailer.
ADDITIONAL HYDRAULIC LINE: Allows you to locate power unit further away from lift. 8 foot of hose standard. APPROACH RAMP FOR 8" LOWERED HEIGHT LIFTS: 60" wide x 65" long. 7 ramp angle. 397 lbs. Model WL-AR8.
Model WL-RHT.
in a pit, this option allows platform to be ush with the oor for fork truck cross trac. Deduct 7" from overall width for usable width.
WARNING BEEPER & STROBE: Sounds and ashes during lifting and lowering operations. 80 decibels. Model WL-WB.
APPROACH RAMP FOR 14" LOWERED HEIGHT: 60" wide x 116" long. 7 ramp angle. 788 lbs. Model WL-AR14. **APPROACH RAMPS MUST BE ANCHORED TO THE FLOOR**
KEY SWITCH LOCKOUT: To avoid unauthorized use of the lift, this option will lock out the controls at the power unit. Model WL-KL. TWO SPEED PUMP: Increase lifting speed by 55% when lift is unloaded. Ideal for unloading applications. Model WL-TSP. 2 HP SINGLE- OR THREE- PHASE ELECTRIC MOTOR: Consult Model WL-2HP.
factory for lift speeds. Both internal and external power units available.
phase power unit with 208/230V, 1 phase, 60Hz power unit (1 gallons per minute pump speed). Model WL-3HP.
7-1/2 HP POWER UNIT: Power unit is wired for three phase 208-230/460V 60Hz, unit will pump 6 gallons per minute. Model WL-7HP. 10 HP POWER UNIT: Power unit is wired for three phase 208-230/460V 60Hz, unit will pump 8 gallons per minute. Model WL-10HP. GALVANIZED COATING: Cold galvanized coating designed for Model SPO-WL-LS-ZRC.
block dock end of ramp to avoid roll o. System requires a special pit mount. Model WL-AWC.
STOP SIGNAL SIGN: As the truck approaches the lift, the sign raises to
let the driver know when to stop for safe loading/unloading. Available on 8 foot wide surface mount units with xed toeboards only. Lose 3" of usable width. Model WL-SSS. construction. Bolt-on installation. Custom sizes available, contact factory.
Model WL-CANOPY.
STEEL-IT COATING: Designed for incidental food contact and wash-down environments. FDA approved. Model SPO-WL-LS-SSC.
PROTECTIVE CANOPY: Fits 6' x 8' platforms. Measures 108" high. Steel
IMMERSION OIL HEATER: For cold weather applications. Built-in metal reservoir thermostat for automatic heat control. 208-230V single or three phase power. 250 watts. Model WL-H2. Use with 460V 3 phase power unit, 500 watts. Model WL-H4.
No Dock Attendant Needed 12" long lip (extends 6" into truck) Service range of 14" above through 8" below dock Lift By-Pass for Safety
Operation: Truck backs against twin actuating arms (bumpers) pushing carriage back (dock and trailer door must be raised). As carriage goes back, deck goes up. When the carriage bumpers contact dock, the deck oats down to rest on trailer. When truck pulls out, deck returns to level supported position automatically. Uniform capacities available up to 100,000 pounds.
MODEL NUMBER DESCRIPTION UNIFORM CAPACITY NET WT. (LBS.)
RECESSED DOCKLEVELER series RU
RU-600-SCB RU-800-SCB RU-800-SCB-F RU-1000-SCB SU-600-SCB SU-800-SCB SU-800-SCB-F SU-1000-SCB PU-600-SCB PU-800-SCB PU-1000-SCB
6'W x 6'L Recessed Unit, Standard 28" Deep Pit 6'W x 8'L Recessed Unit 6'W x 8'6"L Recessed Unit 6'W x 10'L Recessed Unit 6'W x 6'L Recessed Unit with Legs, Full 48" Deep Pit 6'W x 8'L Recessed Unit with Legs 6'W x 8'6"L Recessed Unit with Legs 6'W x 10'L Recessed Unit with Legs 6'W x 6'L (Dockleveler Unit with Legs for in Front of Dock Placement) 6'W x 8'L (Dockleveler Unit with Legs for in Front of Dock Placement) 6'W x 10'L (Dockleveler Unit with Legs for in Front of Dock Placement)
(SPECIFY DOCK HEIGHT WHEN ORDERING)
20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000
2310 2520 3045 3150 2415 2730 3255 3360 2730 3045 3675
DOCKLEVELER WITH LEGS FOR FRONT OF DOCK PLACEMENT series PU
DUAL VINYL WEATHER STRIPPING (FACTORY INSTALLED) CURB ANGLE SET (FOR ANY SIZE DOCKLEVELER) 30,000 POUND CAPACITY FOR 6 FOOT LENGTH 30,000 POUND CAPACITY FOR 8 FOOT LENGTH 30,000 POUND CAPACITY FOR 10 FOOT LENGTH 7 FOOT WIDTH FOR 6 FOOT LENGTH 7 FOOT WIDTH FOR 8 FOOT LENGTH 7 FOOT WIDTH FOR 10 FOOT LENGTH FOAM INSULATION NOTCH FOR TRAILER LOCK SHALLOW PIT OPTION (minimum depth 24") BUMPER EXTENSION FOR LOW DOCKS
HEAVY-DUTY SPRINGS HELP LIFT THE DECK WHEN A TRUCK COMES INTO CONTACT WITH THE DOCKLEVELER
Mechanical Docklevelers
Easy truck loading and unloading with this rugged dockleveler Engineered and designed for minimum maintenance Features a smooth pull chain operation
DVD or VIDEO AVAILABLE
All heavy-duty construction features " checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Service range 12" above and below dock. Includes (2) laminated bumpers. Uniform capacities available up to 50,000 pounds.
MODEL NUMBER
OPERATION
6'W x 5'4"L 6'W x 6'4"L 6'W x 8'4"L 6'W x 10'4"L 7'W x 6'4"L 7'W x 8'4"L 7'W x 10'4"L
Pull Chain Pull Chain Pull Chain Pull Chain Pull Chain Pull Chain Pull Chain
Electric Hydraulic Dockleveler is ideal for high usage dock areas. Easy to operate unit. Operator pushes and holds the "raise" button which activates the hydraulic pump and raises the deck. When the deck reaches the raised position the lip automatically extends. e operator releases the "raise" button and deck descends to rest on the trailer. Control box includes red emergency stop button standard. When the truck pulls away, the deck descends to full down position, trips the limit switch and returns automatically to the level cross trac position. Includes telescopic steel toe guards on both sides, ush with platform edge. 460V, 3 phase power standard. Includes (2) laminated bumpers and a service range of +/- 12". Uniform capacities available up to 80,000 pounds.
MODEL NUMBER
DVD or VIDEO AVAILABLE
OPERATION
UNIFORM CAPACITY
6'W x 6'4"L 6'W x 8'4"L 6'W x 10'4"L 7'W x 6'4"L 7'W x 8'4"L 7'W x 10'4"L
ELECTRIC HYDRAULIC ELECTRIC HYDRAULIC ELECTRIC HYDRAULIC ELECTRIC HYDRAULIC ELECTRIC HYDRAULIC ELECTRIC HYDRAULIC
WS-DV ES CAS SPO FI 18"LIP/6 18"LIP/7 30K/6 30K/8 30K/10 FOD/6' FOD/8' FOD/10' SS/65 SS/66 SS/68 SS/610 SS/76 SS/78 CWO EH-TL*
DUAL VINYL WEATHER STRIPPING PRE-INSTALLED EMERGENCY STOP (RR-SERIES ONLY) CURB ANGLE SET (FOR ANY SIZE DOCKLEVELER) SHALLOW PIT OPTION (17" MINIMUM DEPTH) UNDER-DECK FOAM INSULATION 18" LONG LIP FOR 6' WIDE DOCKLEVELER 18" LONG LIP FOR 7' WIDE DOCKLEVELER 30,000 POUND UNIFORM CAPACITY FOR 6' LENGTH 30,000 POUND UNIFORM CAPACITY FOR 8' LENGTH 30,000 POUND UNIFORM CAPACITY FOR 10' LENGTH LEG OPTION FOR IN FRONT OF DOCK PLACEMENT (6' LENGTH) LEG OPTION FOR IN FRONT OF DOCK PLACEMENT (8' LENGTH) LEG OPTION FOR IN FRONT OF DOCK PLACEMENT (10' LENGTH) STEEL SHELL FOR 6' x 5' POUR IN PLACE INSTALLATION STEEL SHELL FOR 6' x 6' POUR IN PLACE INSTALLATION STEEL SHELL FOR 6' x 8' POUR IN PLACE INSTALLATION STEEL SHELL FOR 6' x 10' POUR IN PLACE INSTALLATION STEEL SHELL FOR 7' x 6' POUR IN PLACE INSTALLATION STEEL SHELL FOR 7' x 8' POUR IN PLACE INSTALLATION COLD WEATHER OIL - GOOD TO -10F (ELECTRIC DOCKLEVELER) ELECTRIC INTERLOCK (EH DOCKLEVELER & TRAILER RESTRAINT)
54 216 31 36 118 158 199 240 240 240 265 276 288 345 299 311 -
*TRAILER RESTRAINT SOLD SEPARATELY 20" LIP RECOMMENDED FOR REFRIGERATED TRUCKS, CONSULT FACTORY FOR PRICING
Edge-O-Docklevelers
Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" above dock and 5" below dock height. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27", *36" long ramping length also available. A steel dock edge, optional approach plate, or approach ramp is required for proper installation. e Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the oor. e operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically. e Hydraulic Hand Pump system is used to lift the leveler and extend the lip. e operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall-mount brackets, cylinder, 15 feet of hydraulic line and oil. Truck must pull out for leveler to return to stored position. e Electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed against the dock, push and hold the control button. e leveler raises and the lip will extend. 115V, 1 phase power standard. Unit comes complete with motor, pump, control box, cylinder, lines and oil. Truck must pull out for leveler to return to stored position.
MODEL NUMBER OPERATION **USABLE WIDTH UNIFORM CAPACITY NET WT. (POUNDS)
FM-0648+ FM-2066+ FM-2072+ FM-2566+ FM-2572+ FM-3066 FM-3072 PP-1572-36* PP-2066 PP-2072 PP-2566 PP-2572 PP-2572-36* PP-3066 PP-3072 PE-1572-36* PE-2066 PE-2072 PE-2566 PE-2572 PE-2572-36* PE-3066 PE-3072
MECHANICAL MECHANICAL MECHANICAL MECHANICAL MECHANICAL MECHANICAL MECHANICAL HAND PUMP HAND PUMP HAND PUMP HAND PUMP HAND PUMP HAND PUMP HAND PUMP HAND PUMP ELECTRIC ELECTRIC ELECTRIC ELECTRIC ELECTRIC ELECTRIC ELECTRIC ELECTRIC
48" 66" 72" 66" 72" 66" 72" 72" 66" 72" 66" 72" 72" 66" 72" 72" 66" 72" 66" 72" 72" 66" 72"
6,000 20,000 20,000 25,000 25,000 30,000 30,000 15,000 20,000 20,000 25,000 25,000 25,000 30,000 30,000 15,000 20,000 20,000 25,000 25,000 25,000 30,000 30,000
374 569 572 583 616 943 1006 752 583 627 622 671 1168 998 1061 805 644 685 682 700 1120 1055 1118
MECHANICAL series FM
*DENOTES 36" RAMPING LENGTH FOR SMALLER GRADE **OVERALL WIDTH IS USABLE WIDTH PLUS 26" +LIP TRIP OPTION - To remove lip from trailer with trailer still backed up to dock, suffix LT OPTIONAL STEEL FACE FOR BUMPER, model EOD-SF
EDGE-O-DOCKLEVELER OPTIONS
MODEL NUMBER DESCRIPTION NET WT. (POUNDS)
PP-HP-R FM-HOOK FM-BAR BB RB FM-FM FM-PP FM-PE PP-PE CE RAMP-2 RAMP-4 AP AP-BE
REPLACEMENT HAND PUMP PULLING HOOK FOR MECHANICAL UNIT (OLD STYLE) ACTUATION HANDLE FOR MECHANICAL UNIT (NEW STYLE) STEEL BUMPER BOX RUBBER BUMPER (REPLACEMENT) FM-SERIES (HOOK STYLE) TO FM-SERIES (HANDLE STYLE) CONVERSION KIT FM-SERIES TO PP-SERIES CONVERSION KIT FM-SERIES TO PE-SERIES CONVERSION KIT PP-SERIES TO PE-SERIES CONVERSION KIT CURB EDGE - 6" CHANNEL x 96" LONG APPROACH RAMP 96"W x 12"L x 2"H APPROACH RAMP 96"W x 24"L x 4"H APPROACH PLATE " THICK x 12"L x 96"W APPROACH PLATE " THICK x 12"L x 96"W WITH BEVELED EDGE
CONTROL BOX
New
TLP-2
L
CK
TYPE (circle) PIT WIDTH (W) PIT LENGTH (L) PIT HEIGHT (H)
Truck Actuated / Mechanical / Electric Dockleveler _______________________________________ _______________________________________ ________________________________ (FRONT) _________________________________ (BACK) ___________________________________ LBS. _______________________________________ _______________________________________ _______________________________________
BA
H
FR ON T
New
vestil
green
Help improve heating eciency and use less energy with our Dockleveler Insulation Blanket. Prevents cold air from entering your warehouse from cracks surrounding your dock door and leveler. Measuring 90"W x 96"L this blanket ts most standard doors. Aluminum extrusion, anchors, and hangers are included to attach to the door. Hangers allow you to secure the blanket in the raised position. Blankets will pay for themselves many times over by controlling heat loss.
MODEL NUMBER OVERALL SIZE (W x L) DESCRIPTION NET WT. (POUNDS)
DIB-96
DVD or VIDEO AVAILABLE
90" x 96"
INSULATION BLANKET
19
vestil
green
Keep out pests and rodents and maintain the proper working environment with dockleveler weather stripping. Kit includes: (2) precut side strips, (1) precut foam insulator for the rear of the pit and installation hardware. Dual Vinyl - A white dual-seal vinyl attaches to the side of Dockleveler with self-tapping sheet metal screws. e replacement vinyl slides into extruded channel that is attached with self-tapping screws. Brushes - Available 1" or 1" wide. Installation is easy. Bolt aluminum extrusion to sides of leveler then simply slide brushes into aluminum extrusion channel.
REPLACEABLE VINYL DUAL VINYL
MODEL NUMBER
MODEL NUMBER
50" / 41" WS-5-RB-1 62" / 53" WS-6-RB-1 85" / 77" WS-8-RB-1 WS-10-RB-1 110" / 101"
50" / 41" WS-5-RB-1.5 62" / 53" WS-6-RB-1.5 85" / 77" WS-8-RB-1.5 WS-10-RB-1.5 110" / 101"
Designed for installation directly in front of the loading dock. e electric hydraulic system captures the ICC bar on the back of semi-trailers. To ensure maximum safety the unit comes standard with an accumulator that allows the lock to follow the trailer up and down as it is loaded/unloaded. A beeper and ashing light warns the operator if the lock does not engage the trailer properly. A visual indication of the restraint's status is shown at all times by the trac light outside and the control panel inside. Comes standard with light package, control panel and three large visual signs. Draw pull shear strength is 32,000 lbs.
MODEL NUMBER DESCRIPTION NET WT. (POUNDS)
Electric Hydraulic, Aluminum Light Pkg. 115V, 1 PH Electric Hydraulic, Polypropylene Light Pkg. 115V, 1 PH Hand Pump Hydraulic, Aluminum Light Package Hand Pump Hydraulic, Polypropylene Light Pkg.
Our Dock Trac System feature ashing red and green lights. Prevent accidents and injuries by providing clear communication between dock personnel and truck drivers. Built-in eyebrow type sun visors increase light visibility. LED model never needs bulb replacements. Deluxe, model DTS-10, consists of one yellow aluminum trac light with both a green and red lens (for outside), and an illuminated push-button control (for inside). Light measures 11"W x 20"H and features an 8" hood over each lens (recommended for west and south exposure). 60 Watt. 115V AC. Four procedure signs are included. Economy, model DTS-5, comes with two yellow polypropylene trac lights, 6"W x 11"H, each having a green and a red lens. e light containing a push button is placed inside the dock area for the dock attendant, and the other is placed outside for the truck driver. Four signs are included.
MODEL NUMBER DESCRIPTION INCLUDES NET WT. (LBS.)
ALUMINUM model DTS-10 POLYPROPYLENE LED LIGHTS model DTS-5 model DTS-5-LED
CAUTION
ENTER ON GREEN LIGHT ONLY Inside
CAUTION
DEPART ON GREEN LIGHT ONLY Outside
NOITUAC
TRAPED NO NEERG THGIL YLNO Outside
Lights, (3) Signs, Control Panel Lights, (4) Signs, 115V, 1 Phase Lights, (4) Signs, 115V, 1 Phase
156 18 18
Dock Barricades - Designed to Prevent Loading Dock "Run O's" (for 8 or 10 foot wide doors)
e Dock Barricade represents the next generation of innovative Loading Dock Safety Systems. Electric/ hydraulic power unit provides quick and eortless operation. Stops a 4,000 lb. fork truck (loaded at 4k) at 4 mph. Electric operation features 115V single phase motor, 24V control, and electrical bumper-style safety stop circuit to sense obstructions when lowering. Installation is simple, anchor the unit to the oor, mount the control on the wall and plug in. Mechanical unit, model DJG-100-MW, features a manual hand crank winch to raise/lower barricade arm.
MODEL NUMBER DOOR SIZE OVERHEAD CLEARANCE ARM HEIGHT LOWERED OVERALL (W x L) NET WT. (POUNDS)
ELECTRIC DJG-100
New
Improve employee comfort while increasing productivity. Use at loading docks, garages, and food processing facilities. Keeps birds, ies, moths, mosquitoes, wasps and other insects out while providing fresh air ventilation, sunlight and increased security. Constructed of durable, all weather vinyl coated polyester that is re retardant as well as mildew and UV resistant. Easy to install. Operation involves a simple manual roller and track system that allows the screen to slide smoothly from side to side, or an easy roll up and down system that is available spring loaded or motorized. Series DBS-XX-ITM-W is 115V, 1PH powered with a 6 foot cord to be hard wired in. Colors Available
Add color to sux of model number. Color shown may dier from actual color. Consult factory for each color. Yellow Black Blue Gray Beige Orange Green Red CURTAIN SLIDES SMOOTHLY FROM SIDE TO SIDE
8' x 8' 8' x 10' 10' x 10' 8' x 8' 8' x 10' 10' x 10'
IN JAMB IN JAMB IN JAMB MOUNTS ON INSIDE WALL MOUNTS ON INSIDE WALL MOUNTS ON INSIDE WALL
54 84 97 96 114 132
SPRING LOAD ROLL UP SPRING LOAD ROLL UP SPRING LOAD ROLL UP IN-TUBE MOTORIZED IN-TUBE MOTORIZED IN-TUBE MOTORIZED
8' x 8' 8' x 10' 10' x 10' 8' x 8' 8' x 10' 10' x 10'
10
Dock Seals
series D-150
series D-350
For use with an 8'W x 8'H (D-150-XX) or 8'W x 9'H (D-350-XX) door. Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through-the-wall installation kits included. Three piece construction: top - 12" high; sides - beveled sides with 9" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge-O-Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 11. Units are non-returnable.
OVERALL WIDTH NET WT. (POUNDS) MODEL NUMBER PROJECTION OVERALL HEIGHT OVERALL WIDTH NET WT. (POUNDS)
MODEL NUMBER
PROJECTION
OVERALL HEIGHT
D-150-10 D-150-11 D-150-12 D-150-13 D-150-14 D-150-15 D-150-16 D-150-17 D-150-18 D-150-19 D-150-20*
Door Size 8 feet wiDe x 8 feet high 10" 108" 120" 11" 108" 120" 12" 108" 120" 13" 108" 120" 14" 108" 120" 15" 108" 120" 16" 108" 120" 17" 108" 120" 18" 108" 120" 19" 108" 120" 20" 108" 120"
230 242 253 265 276 288 299 311 322 334 345
D-350-10 D-350-11 D-350-12 D-350-13 D-350-14 D-350-15 D-350-16 D-350-17 D-350-18 D-350-19 D-350-20*
Door Size 8 feet wiDe x 9 feet high 10" 120" 120" 11" 120" 120" 12" 120" 120" 13" 120" 120" 14" 120" 120" 15" 120" 120" 16" 120" 120" 17" 120" 120" 18" 120" 120" 19" 120" 120" 20" 120" 120"
259 270 282 293 305 316 328 351 362 374 399
For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run-off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9" at wall. Verticals are mounted on 2" x 12" wooden boards allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge-O-Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 11. Units are non-returnable.
MODEL NUMBER PROJECTION OVERALL HEIGHT OVERALL WIDTH NET WT. (POUNDS)
Effective sealing action with full height access. This versatile unit utilizes seal sides and a shelter top.
vestil
green
D-150/650-10 D-150/650-11 D-150/650-12 D-150/650-13 D-150/650-14 D-150/650-15 D-150/650-16 D-150/650-17 D-150/650-18 D-150/650-19 D-150/650-20*
10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20"
Door Size 8 feet wiDe x 10 feet high 126" 126" 126" 126" 126" 126" 126" 126" 126" 126" 126"
114" 114" 114" 114" 114" 114" 114" 114" 114" 114" 114"
240 254 266 301 315 327 340 352 365 379 395
Dock Shelters
For use with doors up to 10'W x 10'H. Reduces oversized doors to match truck opening. Long wear 40 oz. fabric is highly resistant to abrasion and tearing. Fiberglass staves are sewn into the flaps. Seal is formed along the sides and top of trailer when the vertical and top panels are pushed inward by the trailer. Recommend minimum 10" trailer penetration for a good seal. Supporting structure is made of 2" x 4" wolmanized lumber. Shelter is protected by safety yellow steel guide protectors. The top header piece measures 132"W and contains a drop curtain which measures 36"H. Two vertical pieces measure 126" tall with vertical flaps measuring 21"W. When installed, the shelter will close the door opening down to 90"W x 90"H (between flaps). Includes two yellow steel guide protectors and foam-filled corner pads for extra sealing action. To ensure proper size complete and fax the survey sheet shown on page 11. Units are non-returnable.
vestil
green
DOCK SEAL & SHELTER OPTIONS & SURVEY SHEET CAN BE FOUND ON PAGE 11
MODEL NUMBER
PROJECTION
OVERALL HEIGHT
OVERALL WIDTH
Door Size 8 feet wiDe x 8 feet high to 10 feet wiDe x 10 feet high 18" 126" 132" 24" 126" 132" 30" 126" 132" 36" 126" 132"
11
RC
TC
H W
LC
DB
A DH B
Special Size Trailers Highest Trailer ____________________________________ Lowest Trailer ____________________________________ Widest Trailer_____________________________________ Narrowest Trailer __________________________________
Building with Sloped Dock Approach (A) Distance between trailer and building at point A _______ (inches) (B) Distance between trailer and building at point B _______ (inches) DOCK SEAL AND SHELTER OPTIONS
MODEL NUMBER DESCRIPTION
vestil
green
Full Height Pleats, Full Height Guide Stripes Full Height Pleats, Standard Guide Stripes (24" High) Armor Pleats, Top 24" Only 54 Ounce Material - Face Only 18" Header Sloped Verticals Bottom Bun Bottom Bun with Bumpers Full Height Guide Stripes 12" Flap Dock Seal Sides Between 97" & 120" Repair Kit
D-FHPFS D-FHPS D-AP D-54OZ D-18H D-SV D-BBF D-BBFB D-GS D-12F D-SIDE D-KIT
vestil
green
D-520-24
24"
132"
132"
437
Scaolding Nets
Contain and catch light debris falling from scaolds, bridges, and buildings under construction. Polyester material can be cut to size without fraying. Disposable UV resistant black nylon quick-ties allow rapid installation. Install bands from top-to-bottom or left-to-right, according to your need. Other styles available, please contact factory. Complies with OSHA 29 CFR 1926.451 (a) (6).
MODEL NUMBER DESCRIPTION SIZE NET WT. (POUNDS)
New
RED NET ROLL GREEN NET ROLL ORANGE NET ROLL QUICK TIES (100 PER BAG) GALVANIZED METAL DISC TAPCON SCREWS
4'W x 165'L 4'W x 165'L 4'W x 165'L 3 16 / "W x 12"L 3" DIA. --
20 20 20 1 1 1
12
SERIES
"600" SERIES STRIPS ARE 6" WIDE x 0.06" THICK "800" SERIES STRIPS ARE 8" WIDE x 0.08" THICK "1200" SERIES STRIPS ARE 12" WIDE x 0.12" THICK "1600" SERIES STRIPS ARE 16" WIDE x 0.16" THICK "S" FOR STANDARD 2/3 OVERLAP "F" FOR FULL OVERLAP
OVERLAP
vestil
green
MOUNTING "H" FOR HEADER MOUNT (STANDARD) "W" FOR WALL MOUNT (EXTRA COST)
PRE-ASSEMBLED STRIP DOORS ALL DOORS ARE SHIPPED PRE-ASSEMBLED AND READY FOR INSTALLATION. INSTALLATION HARDWARE NOT INCLUDED.
FULL OVERLAP
13
model YR-16-7230
YR-16-7230 YR-16-8430 YR-16-7236 YR-16-8436 YR-20-7330 YR-20-8530 YR-20-7336 YR-20-8536 YR-25-7330 YR-25-8530 YR-25-7336 YR-25-8536 YR-30-7330 YR-30-8530 YR-30-7336 YR-30-8536
16,000 16,000 16,000 16,000 20,000 20,000 20,000 20,000 25,000 25,000 25,000 25,000 30,000 30,000 30,000 30,000
72" 84" 72" 84" 73" 85" 73" 85" 73" 85" 73" 85" 73" 85" 73" 85"
67" 78" 67" 78" 67" 78" 67" 78" 67" 78" 67" 78" 67" 78" 67" 78"
30 30 36 36 30 30 36 36 30 30 36 36 30 30 36 36
3780 4095 4725 5040 4515 4830 5565 5985 4725 5040 5880 6300 4935 5250 6300 6720
OPTIONS
**ADD 19" TO OVERALL RAMPING WIDTH FOR MAXIMUM OVERALL WIDTH. INCLUDES LANDING GEAR AND CRANK MECHANISM. 27" PNEUMATIC TIRES HYDRAULIC HAND PUMP model YR-HL TOW BAR HITCH model YR-TB-H
36 36 36 36 36 36 36 36
LEVELER IS 64" WIDE ON 72" & 73" MODELS AND 75" WIDE ON 84" & 85" MODELS
36 36 36 36 36 36
LEVELER IS 66" WIDE ON 72" & 73" MODELS AND 72" WIDE ON 84" & 85" MODELS
Stationary ramps, series YRDS, include an Edge-OfDock Leveler at the truck end. Ramp height is xed at 50". Leveler offers service range of +/- 5". NET WT. (POUNDS)
PNEUMATIC TIRE & HAND PUMP HYDRAULIC LIFT (5 MPH MAX. TOW SPEED) (NOT AVAILABLE ON YRD MODELS) PNEUMATIC TIRE & 12V DC HYDRAULIC LIFT (5 MPH MAX. TOW SPEED) (NOT AVAILABLE ON YRD MODELS) FORK LIFT PICKUP SLOTS (7"W X 2"H USABLE ON 24" CENTERS) FORK POSITIONING LOOP TOW BAR HITCH 42" HIGH HANDRAILS WITH 21" MIDRAIL (WELDED) (NON-REMOVABLE) MECHANICAL DOCKLEVELER IN LIEU OF HYDRAULIC (ON 16,000, 20,000, AND 25,000 LBS. CAPACITIES) HOLES IN LIP TO LAG RAMP TO TOP OF DOCK
14
PNEUMATIC TIRES OPTION Service Range will be 40" to 66" model AYR-PNTR
16,000 74" SY-167230 16,000 86" SY-168430 16,000 95" SY-169330 16,000 74" SY-167236-L 16,000 86" SY-168436-L 16,000 95" SY-169336-L 20,000 74" SY-207230 20,000 86" SY-208430 20,000 95" SY-209330 20,000 74" SY-207236-L 20,000 86" SY-208436-L 20,000 95" SY-209336-L 25,000 74" SY-257230 25,000 86" SY-258430 25,000 95" SY-259330 25,000 74" SY-257236-L 25,000 86" SY-258436-L 25,000 95" SY-259336-L 30,000 74" SY-307230 30,000 86" SY-308430 30,000 74" SY-307236-L 30,000 86" SY-308436-L ALUMINUM YARD RAMPS WITH ALUMINUM GRATING 16,000 74" AY-167230 16,000 86" AY-168430 16,000 95" AY-169330 16,000 74" AY-167236-L 16,000 86" AY-168436-L 16,000 95" AY-169336-L 20,000 74" AY-207230 20,000 86" AY-208430 20,000 95" AY-209330 20,000 74" AY-207236-L 20,000 86" AY-208436-L 20,000 95" AY-209336-L 25,000 74" AY-257230 25,000 86" AY-258430 25,000 95" AY-259330 25,000 74" AY-257236-L 25,000 86" AY-258436-L 25,000 95" AY-259336-L 30,000 74" AY-307230 30,000 86" AY-308430 30,000 74" AY-307236-L 30,000 86" AY-308436-L ALUMINUM YARD RAMP OPTIONS
MODEL NUMBER DESCRIPTION
66" 78" 87" 66" 78" 87" 66" 78" 87" 66" 78" 87" 66" 78" 87" 66" 78" 87" 66" 78" 66" 78" 66" 78" 87" 66" 78" 87" 66" 78" 87" 66" 78" 87" 66" 78" 87" 66" 78" 87" 66" 78" 66" 78"
30 30 30 36 36 36 30 30 30 36 36 36 30 30 30 36 36 36 30 30 36 36 30 30 30 36 36 36 30 30 30 36 36 36 30 30 30 36 36 36 30 30 36 36
3518 4043 4515 4305 4830 5303 3623 4148 4620 4410 4935 5408 3675 4200 4725 4463 4988 5513 3728 4253 4515 5040 2783 3150 3465 3360 3728 3990 2888 3255 3570 3465 3833 4095 2940 3308 3675 3578 3885 4200 3092 3360 3570 3938
12V DC HYDRAULIC LIFT (INCLUDES ON-BOARD CHARGER) FORK POSITIONING LOOP TOW BAR HITCH 42" HIGH HANDRAILS WITH 21" MIDRAIL (WELDED) (NON-REMOVABLE) 6" CURB HEIGHT YELLOW SAFETY CURBS PNEUMATIC TIRE OPTION (SERVICE RANGE 40" TO 66") HOLES IN LIP TO LAG RAMP TO TOP OF DOCK
15
49-51" 52-54" 55-57" 58-60" 61-63" 64-66" 67-69" 70-72" 73-75" 76-78" 79-81" 82-84" 85-87" 88-90" 91-93" 94-96" 49-51" 52-54" 55-57" 58-60" 61-63" 64-66" 67-69" 70-72" 73-75" 76-78" 79-81" 82-84" 85-87" 88-90" 91-93" 94-96" 49-51" 52-54" 55-57" 58-60" 61-63" 64-66" 67-69" 70-72" 73-75" 76-78" 79-81" 82-84" 85-87" 88-90" 91-93" 94-96"
33-35" 36-38" 39-41" 42-44" 45-47" 48-50" 51-53" 54-56" 57-59" 60-62" 63-65" 66-68" 69-71" 72-74" 75-77" 78-80" 33-35" 36-38" 39-41" 42-44" 45-47" 48-50" 51-53" 54-56" 57-59" 60-62" 63-65" 66-68" 69-71" 72-74" 75-77" 78-80" 33-35" 36-38" 39-41" 42-44" 45-47" 48-50" 51-53" 54-56" 57-59" 60-62" 63-65" 66-68" 69-71" 72-74" 75-77" 78-80"
716 735 759 801 817 834 880 898 949 972 1013 1030 1076 1099 1146 1175 765 813 830 857 880 926 956 1007 1036 7076 1111 1157 1180 1226 1256 1284 855 909 983 1006 1071 1110 1168 1203 1261 1295 1371 1399 1457 1503 1549 1590
791 828 811 860 800 918 849 950 903 1009 923 1041 947 1084 1010 1114 1069 1171 1096 1199 1142 1262 1161 1293 1214 1331 1251 1362 1305 1414 1338 1477 78 INCH USABLE / 84 INCH WIDE BOARD** 812 891 865 924 904 987 956 1019 982 1094 1034 1125 1066 1178 1143 1247 1168 1283 1213 1314 1253 1377 1306 1403 1332 1456 1396 1498 1430 1560 1468 1619 102 INCH USABLE / 108 INCH WIDE BOARD** 1004 1109 1031 1146 1118 1236 1144 1274 1216 1365 1263 1413 1330 1482 1380 1542 1447 1645 1488 1650 1575 1745 1608 1788 1875 1851 1744 1903 1798 1986 1845 2027
891 826 990 1025 1087 1122 1180 1214 1278 1307 1376 1411 1468 1503 1561 1630 960 995 1064 1099 1180 1214 1284 1318 1399 1434 1503 1538 1607 1653 1723 1803 1191 1237 1336 1376 1475 1526 1617 1665 1688 1803 1907 1954 2046 2104 2196 2265
DC-25/FC-60
C A
STANDARD FEATURES
Auto Drop Locks (add 13" to overall width)** Pop-up Fork Lift Loops Steel Rectangular Board Overlap Style Plate (both ends) Safety Curbs are 4" High High Strength Cross Traffic Tread plate for Better Traction Structural Steel Support Beams
DROP LOCKS are designed to automatically keep the railboard tight against the car, accommodating for various railcar widths. These cast bars measure 1" thick. (standard)
POP-UP-LOOPS automatically pop up and stay when rail dockboard is sitting on dock. Operator pulls loop up and locks to take out of car. Loops measure 24" on center. (standard)
PIN LOCKS provide an economical alternative to the drop locks. (alternative design)
Heavy duty steel container ramp facilitates easy loading/unloading of shipping containers when placed on ground level. Hinged ip-over bridge allows for easy transportation and compact storage. Tapered lip provides smooth transition into container at various heights. Built in fork pockets in base for convenient fork truck positioning.
MODEL NUMBER OVERALL WIDTH OVERALL LENGTH HEIGHT UNIFORM CAPACITY (LBS.) NET WT. (POUNDS)
New
SCR-72 SCR-84
72" 84"
98" 98"
4-3/8" 4-3/8"
15,000 15,000
950 1110
16
LENGTH
HEIGHT DIFF.
MODEL NUMBER
UNIFORM CAPACITY
35 40 46 55 39 46 52 63
31 37 45 58 36 44 53 69
Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with trac to safely move in and out of the trailer. Each unit is constructed of high strength, nonskid aluminum alloy tread plate. e lightweight design with bolt on zinc plated legs and handles on each side makes portability easy. Locking legs for OSHA Compliance. e bend or crown is 11 and located 9" from edge of dockplate. Not for use with fork trucks.
3/8" PLATE THICKNESS
LENGTH HEIGHT DIFF. MODEL NUMBER SHIPS VIA NET WT. (LBS.) UNIFORM CAPACITY MODEL NUMBER
WIDTH
30" 30" 30" 30" 36" 36" 36" 36" 42" 42" 42" 48" 48" 48" 48" 48" 48" 48" 60" 60" 60" 60" 60" 60" 60" 72" 72" 72" 72"
24" 30" 36" 48" 24" 30" 36" 48" 24" 30" 48" 24" 30" 36" 42" 48" 54" 60" 24" 30" 36" 42" 48" 54" 60" 24" 30" 36" 48"
3" 4" 5" 7" 3" 4" 5" 7" 3" 4" 7" 3" 4" 5" 6" 7" 8" 9" 3" 4" 5" 6" 7" 8" 9" 3" 4" 5" 7"
E-3024 E-3030 E-3036 E-3048 E-3624 E-3630 E-3636 E-3648 E-4224 E-4230 E-4248 E-4824 E-4830 E-4836 E-4842 E-4848 E-4854 E-4860 E-6024 E-6030 E-6036 E-6042 E-6048 E-6054 E-6060 E-7224 E-7230 E-7236 E-7248
UPS UPS UPS UPS UPS UPS UPS UPS UPS UPS LTL UPS UPS UPS LTL LTL LTL LTL UPS UPS LTL LTL LTL LTL LTL UPS LTL LTL LTL
3,000 2,300 1,800 1,400 3,600 3,000 2,500 1,900 4,300 3,300 2,100 5,200 4,100 3,500 3,000 2,600 2,200 1,800 5,700 4,600 4,100 3,500 2,900 2,400 2,000 6,500 5,400 4,300 3,400
EH-3024 EH-3030 EH-3036 EH-3048 EH-3624 EH-3630 EH-3636 EH-3648 EH-4224 EH-4230 EH-4248 EH-4824 EH-4830 EH-4836 EH-4842 EH-4848 EH-4854 EH-4860 EH-6024 EH-6030 EH-6036 EH-6042 EH-6048 EH-6054 EH-6060 EH-7224 EH-7230 EH-7236 EH-7248
UPS UPS UPS UPS UPS UPS UPS UPS UPS UPS LTL UPS UPS UPS LTL LTL LTL LTL UPS UPS LTL LTL LTL LTL LTL UPS LTL LTL LTL
53 63 74 95 62 74 87 111 70 84 99 78 93 111 127 142 160 175 93 113 134 154 173 195 214 109 132 158 205
5,200 4,100 3,500 2,600 6,200 5,100 4,300 3,000 7,200 5,900 3,500 8,200 6,300 5,300 4,300 3,800 3,300 2,900 10,000 7,800 6,600 5,500 4,800 4,100 3,700 11,900 9,500 7,800 5,900
Special Location of Legs Anti-Theft Chain (PER LINEAR FOOT) Extra Pair of Legs with Handles & Hardware Trade in Allowance (F.O.B. IN)
17
Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runos and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11 and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA. When using three-wheeled fork trucks order dockboard with capacity at least four-times the lifting capacity of fork truck.
A. CAPACITY is based upon the heaviest type of equipment used plus the maximum load carried times the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered. Steel (TS-series) dockboards recommended for high use docks. EQUIPMENT TWO-WHEEL HAND TRUCKS FOUR-WHEEL PLATFORM TRUCK - (NON-TILT) PALLET TRUCKS - HAND PALLET TRUCKS - ELECTRIC PLATFORM (SKID) TRUCKS - HAND - WALKIE PLATFORM (SKID) TRUCKS - ELECTRIC - WALKIE FORK TRUCKS - ELECTRIC WALKIE FORK TRUCKS - ELECTRIC RIDER FORK TRUCKS - GAS RIDER SINGLE AXLE RATING OF TOTAL LOAD 100% 50% 75% 66% 75% 66% 90% 90% 90% B. Width of Dockboard should be at least 15" wider than the load or equipment passing between the curbs. If the load does not pass between curbs but is elevated above, add 15" to the overall width of equipment. (Good rule of thumb is to subtract 5-6" from dockboard width to achieve actual usable width) C. Use this guide for truck oor heights to determine the Height Differential from the truck bed to dock. (Numbers listed reference an empty truck.) REFRIGERATED HEAVY TRAILERS HEAVY SEMI-TRAILERS LIGHT SEMI-TRAILERS LARGE SINGLE BED SMALL SINGLE BED 54" TO 61" 51" TO 56" 48" TO 54" 45" TO 49" 42" TO 50" 30"
D. Use rst & second column of chart below to determine length of board. Rise/Run (x 100) = % of Grade.
UNIFORM CAPACITY
Size Width-Length Inches Ht. Difference Ht. Difference 8/17% 11/19% Inches Inches
5,000 LBS.
Model Number Net Wt. (lbs.)
6,000 LBS.
Model Number Net Wt. (lbs.)
8,000 LBS.
Model Number Net Wt. (lbs.)
10,000 LBS.
Model Number Net Wt. (lbs.)
54
36 48 60 30 36 42 48 54 60 66 72 78 84 36 48 60 30 36 48 60 36 48 60 36 48 60
4 5 7 3 4 5 5 6 7 8 8 9 10 4 5 7 3 4 5 7 4 5 7 4 5 7
5 7 10 4 5 6 7 8 10 11 12 13 14 5 7 10 4 5 7 10 5 7 10 5 7 10
BTA-05005436 BTA-05005448 BTA-05005460 BTA-05006030 BTA-05006036 BTA-05006042 BTA-05006048 BTA-05006054 BTA-05006060 BTA-05006066 BTA-05006072 BTA-05006078 BTA-05006084 BTA-05006636 BTA-05006648 BTA-05006660 BTA-05007230 BTA-05007236 BTA-05007248 BTA-05007260 BTA-05007836 BTA-05007848 BTA-05007860 BTA-05008436 BTA-05008448 BTA-05008460
114 155 197 106 124 160 180 200 212 222 252 271 292 162 204 254 139 162 204 254 151 233 273 193 242 288
Net Wt. (lbs.)
BTA-06005436 BTA-06005448 BTA-06005460 BTA-06006030 BTA-06006036 BTA-06006042 BTA-06006048 BTA-06006054 BTA-06006060 BTA-06006066 BTA-06006072 BTA-06006078 BTA-06006084 BTA-06006636 BTA-06006648 BTA-06006660 BTA-06007230 BTA-06007236 BTA-06007248 BTA-06007260 BTA-06007836 BTA-06007848 BTA-06007860 BTA-06008436 BTA-06008448 BTA-06008460
127 166 203 124 134 160 186 206 232 238 264 279 309 150 208 242 139 162 217 254 188 239 278 193 242 288
Net Wt. (lbs.)
BTA-08005436 BTA-08005448 BTA-08005460 BTA-08006030 BTA-08006036 BTA-08006042 BTA-08006048 BTA-08006054 BTA-08006060 BTA-08006066 BTA-08006072 BTA-08006078 BTA-08006084 BTA-08006636 BTA-08006648 BTA-08006660 BTA-08007230 BTA-08007236 BTA-08007248 BTA-08007260 BTA-08007836 BTA-08007848 BTA-08007860 BTA-08008436 BTA-08008448 BTA-08008460
127 170 226 124 145 170 197 222 247 270 292 323 332 162 214 269 145 175 238 290 188 255 312 200 273 332
Net Wt. (lbs.)
60
BTA-10006030 BTA-10006036 BTA-10006042 BTA-10006048 BTA-10006054 BTA-10006060 BTA-10006066 BTA-10006072 BTA-10006078 BTA-10006084 BTA-10006636 BTA-10006648 BTA-10006660 BTA-10007230 BTA-10007236 BTA-10007248 BTA-10007260 BTA-10007836 BTA-10007848 BTA-10007860 BTA-10008436 BTA-10008448 BTA-10008460
134 156 180 216 239 269 286 311 335 369 180 230 284 158 202 245 297 216 262 319 232 281 340
66
72
78 84
UNIFORM CAPACITY
Size Width-Length Inches Ht. Difference Ht. Difference 11/19% 11/19% Inches Inches
12,000 LBS.
Model Number
15,000 LBS.
Model Number
20,000 LBS.
Model Number
60
30 36 48 54 60 72 84 36 48 60 30 36 48 60 72 36 48 60 72 36 48 60 72
3 4 5 6 7 8 10 4 5 7 3 4 5 7 8 4 5 7 8 4 5 7 8
4 5 7 8-1/2 10 12 14 5 7 10 4 5 7 10 12 5 7 10 12 5 7 10 12
BTA-12006030 BTA-12006036 BTA-12006048 BTA-12006054 BTA-12006060 BTA-12006072 BTA-12006084 BTA-12006636 BTA-12006648 BTA-12006660 BTA-12007230 BTA-12007236 BTA-12007248 BTA-12007260 BTA-12007836 BTA-12007848 BTA-12007860 BTA-12008436 BTA-12008448 BTA-12008460
106 124 180 200 212 252 292 162 204 254 139 162 204 254 151 233 273 193 242 288
BTA-15006030 BTA-15006036 BTA-15006048 BTA-15006054 BTA-15006060 BTA-15006072 BTA-15006636 BTA-15006648 BTA-15006660 BTA-15007230 BTA-15007236 BTA-15007248 BTA-15007260 BTA-15007272 BTA-15007836 BTA-15007848 BTA-15007860 BTA-15007872 BTA-15008436 BTA-15008448 BTA-15008460 BTA-15008472
124 134 186 206 232 264 150 208 242 139 162 217 254 300 188 239 278 328 193 242 288 350
BTA-20006030 BTA-20006036 BTA-20006048 BTA-20006054 BTA-20006060 BTA-20006072 BTA-20006636 BTA-20006648 BTA-20006660 BTA-20007230 BTA-20007236 BTA-20007248 BTA-20007260 BTA-20007836 BTA-20007848 BTA-20007860 BTA-20008436 BTA-20008448 BTA-20008460
124 145 197 222 247 292 162 214 269 145 175 309 290 188 255 312 200 273 332
66
72
78
84
DC-25/FC-100
18
UNIFORM CAPACITY
Size (Inches) Width x Length Ht. Difference 11 / 19% Inches
15,000 LBS.
MODEL NUMBER NET WT. (LBS.)
20,000 LBS.
MODEL NUMBER NET WT. (LBS.)
60 60 60 60 72 72 72
36 48 60 72 36 48 60
5 7 10 12 5 7 10
Dockboard Accessories
Lifting Chains 48"W - 66"W Lifting Chains 72"W - 84"W Sliding Span Locks (BTA only) Dockboard Wheels Kit (125 lb. capacity) Dockboard Handle Kit Wheels & Handle Kit (125 lb. capacity) Span Pins & Holes (4 holes per side)
Extra Span Holes Extra Span Pins Leverlift Canted Edge Removable Pickup Loops (TS series only) Anti-Theft Chain Second Bend
series AHTD
DESIGNED FOR USE WITH TWO WHEEL HAND TRUCKS (not included)
Scale 3" to 6" curbs and high door thresholds. Ideal for use with two wheel hand trucks for deliveries. Aluminum construction is lightweight yet durable, " thick plate. Features carrying handles and diamond tread plate surface for better traction.
MODEL NUMBER OVERALL WIDTH OVERALL LENGTH UNIFORM CAPACITY (POUNDS) NET WT. (POUNDS)
10 12 14
19
Constructed of high strength (55,000 psi) steel for long life. Beveled edges on both ends permit smooth entry and exit. Deck is diamond plated for safe, ecient use. Welded safety curbs for maximum strength. Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier oor pickup by fork trucks when not in use. Standard with leverlift for quick portability with fork truck. Optional accessories: lifting chains, span locks, span pins/holes and removable pickup loops. Manufactured in compliance with OSHA. When using three wheeled fork trucks, select capacity +20% due to concentrated load on center of board.
UNIFORM CAPACITY
Size (Inches) Width x Length Ht. Difference 11 / 19% Inches
LEVERLIFT STANDARD
10,000 LBS.
MODEL NUMBER NET WT. (LBS.)
15,000 LBS.
MODEL NUMBER NET WT. (LBS.)
20,000 LBS.
MODEL NUMBER NET WT. (LBS.)
60 60 60 60 66 66 66 72 72 72 72 72 84 84 84 60 60 60 60 66 66 66 72 72 72 72 72 84 84 84
36 48 60 72 36 48 72 36 48 54 60 72 36 48 60 36 48 60 72 36 48 72 36 48 54 60 72 36 48 60
5 7 10 12 5 7 12 5 7 8-1/2 10 12 5 7 10
Ht. Difference 11 / 19% (In)
5 7 10 12 5 7 12 5 7 8-1/2 10 12 5 7 10
TS-10-6036 TS-10-6048 TS-10-6060 TS-10-6072 TS-10-6636 TS-10-6648 TS-10-6672 TS-10-7236 TS-10-7248 TS-10-7254 TS-10-7260 TS-10-7272 TS-10-8436 TS-10-8448 TS-10-8460 25,000 LBS. TS-25-6036 TS-25-6048 TS-25-6060 TS-25-6072 TS-25-6636 TS-25-6648 TS-25-6672 TS-25-7236 TS-25-7248 TS-25-7254 TS-25-7260 TS-25-7272 TS-25-8436 TS-25-8448 TS-25-8460
261 368 525 597 318 396 647 326 426 556 678 721 432 567 671 447 562 695 791 483 607 855 518 651 729 807 919 563 741 878
TS-15-6036 TS-15-6048 TS-15-6060 TS-15-6072 TS-15-6636 TS-15-6648 TS-15-6672 TS-15-7236 TS-15-7248 TS-15-7254 TS-15-7260 TS-15-7272 TS-15-8436 TS-15-8448 TS-15-8460 30,000 LBS. TS-30-6036 TS-30-6048 TS-30-6060 TS-30-6072 TS-30-6636 TS-30-6648 TS-30-6672 TS-30-7236 TS-30-7248 TS-30-7254 TS-30-7260 TS-30-7272 TS-30-8436 TS-30-8448 TS-30-8460
326 426 537 635 353 461 686 347 496 575 698 742 452 567 702 467 582 798 952 554 730 1032 596 786 841 931 1111 681 858 1065
TS-20-6036 TS-20-6048 TS-20-6060 TS-20-6072 TS-20-6636 TS-20-6648 TS-20-6672 TS-20-7236 TS-20-7248 TS-20-7254 TS-20-7260 TS-20-7272 TS-20-8436 TS-20-8448 TS-20-8460
Standard with Leverlift
333 435 695 791 359 470 855 417 551 654 723 919 563 741 878
48" 48" 48" 48" 54" 54" 54" 54" 60" 60" 60"
30" 36" 48" 60" 30" 36" 48" 60" 36" 48" 60"
4" 5" 7" 9" 4" 5" 7" 9" 5" 7" 9"
SE-4830 SE-4836 SE-4848 SE-4860 SE-5430 SE-5436 SE-5448 SE-5460 SE-6036 SE-6048 SE-6060
5,000 4,125 3,090 2,475 5,500 4,600 3,450 2,760 5,150 3,860 3,090
221 250 324 399 235 277 361 444 306 400 498
SEH-4830 SEH-4836 SEH-4848 SEH-4860 SEH-5430 SEH-5436 SEH-5448 SEH-5460 SEH-6036 SEH-6048 SEH-6060
8,800 7,300 5,500 4,400 9,900 8,250 6,185 4,950 9,160 6,875 5,500
282 330 429 528 314 371 486 575 404 526 619
20
TYPE A - OVERLAP
DECK CROSS-SECTION
TYPE
HEIGHT RANGE
LENGTH
A A A A A A A A B B B B B B B B
6" - 21" 6" - 25" 6" - 29" 6" - 33" 6" - 38" 6" - 46" 6" - 54" 6" - 62" 6" - 23" 6" - 27" 6" - 31" 6" - 35" 6" - 40" 6" - 48" 6" - 54" 6" - 64"
6' 7' 8' 9' 10' 12' 14' 16' 6' 7' 8' 9' 10' 12' 14' 16'
2,800 2,800 2,500 2,500 2,200 1,900 1,600 1,000 2,800 2,800 2,500 2,500 2,200 1,900 1,600 1,000
2,000 1,800 1,650 1,600 1,500 1,400 1,200 1,000 2,000 1,800 1,650 1,600 1,500 1,400 1,200 1,000
AWR-28-6A AWR-28-7A AWR-28-8A AWR-28-9A AWR-28-10A AWR-28-12A AWR-28-14A AWR-28-16A AWR-28-6B AWR-28-7B AWR-28-8B AWR-28-9B AWR-28-10B AWR-28-12B AWR-28-14B AWR-28-16B
76 88 100 112 124 148 172 196 76 88 100 112 124 148 172 196
AWR-38-6A AWR-38-7A AWR-38-8A AWR-38-9A AWR-38-10A AWR-38-12A AWR-38-14A AWR-38-16A AWR-38-6B AWR-38-7B AWR-38-8B AWR-38-9B AWR-38-10B AWR-38-12B AWR-38-14B AWR-38-16B
97 112 125 142 157 187 217 227 97 112 125 142 157 187 217 227
HEIGHT RANGE
LENGTH
6" - 21" 6" - 25" 6" - 29" 6" - 33" 6" - 38" 6" - 46" 6" - 54" 6" - 62"
43 45 48 51 53 58 64 69
49 53 57 61 65 72 80 88
Ramp Cart Option, provides for easy one-person ramp positioning and transporting. Pull handle up to vertical position to rotate and lock wheels in down position. Push handle down to unlock and lift wheels so ramp can be used to service lower trailers. Hard rubber wheels measure 10" x 2". Minimum ramp service height is 14" with this option. Easy bolt-on installation. Walk ramp sold separately.
model AWR-R-CART
21
Easy to install bolt-on handrailing option gives ramp users more stability and security. Railing sections are 42" high with a 21" mid-rail. Units install onto both A-style and B-style aluminum walk ramps. Handrailing may be attached to one side or both sides of ramp. Aluminum construction with unpainted nish. Installation brackets and hardware included. Railing priced each.
MODEL NUMBER STYLE HANDRAIL LENGTH NET WT. (LBS.)
New
AWR-HR-2A AWR-HR-3A
2 FT. 3 FT.
15 16
Suitcase Ramp
Meet ADA requirements with these handy lightweight compact ramps. Assembly required. Single fold ramp measures 14"W x 72"L x 3"H when folded. It has a 1" curb and 2" lip. e ramp is serrated and has debris slots.
MODEL NUMBER UNFOLDED (W x L x H) FOLDED (W x L x H) UNIFORM CAPACITY (POUNDS) NET WT. (POUNDS)
SINGLE FOLD model RAMP-SF
RAMP-SF
500
33
New
RK-8 RK-12
8 14
ROUGH TEXTURE
New
ROUND CONVEX ROUND CONVEX ROUND CONVEX ROUND CONVEX RECTANGULAR DOME 360 DOME 360
5 9 14 20 12 15 20
CNVX-2616
DOME-32
22
24" WIDE
MODEL NUMBER NET WT. (EACH)
6"
8"
10"
PORTABILITY KIT, model ATWR-WL, allows one person to transport and place wheel riser. Features 5" x 2" mold-on-rubber wheels. For use with aluminum wheel risers only.
12"
48" 54" 60" 102" 54" 60" 66" 108" 60" 66" 72" 114" 66" 72" 78" 120"
30" 36" 42" 84" 30" 36" 42" 84" 30" 36" 42" 84" 30" 36" 42" 84"
ATWR-18-6-48 ATWR-18-6-54 ATWR-18-6-60 ATWR-18-6-102 ATWR-18-8-54 ATWR-18-8-60 ATWR-18-8-66 ATWR-18-8-108 ATWR-18-10-60 ATWR-18-10-66 ATWR-18-10-72 ATWR-18-10-114 ATWR-18-12-66 ATWR-18-12-72 ATWR-18-12-78 ATWR-18-12-120
70/UPS 80/UPS 87/UPS 155 90/UPS 98 109 187 108 121 130 227 133 142 179 261
ATWR-24-6-48 ATWR-24-6-54 ATWR-24-6-60 ATWR-24-6-102 ATWR-24-8-54 ATWR-24-8-60 ATWR-24-8-66 ATWR-24-8-108 ATWR-24-10-60 ATWR-24-10-66 ATWR-24-10-72 ATWR-24-10-114 ATWR-24-12-66 ATWR-24-12-72 ATWR-24-12-78 ATWR-24-12-120
87/UPS 100/UPS 108 194 112 121 135 233 133 151 160 279 164 174 223 321
ADD A WHEEL TO A SINGLE ALUMINUM WHEEL RISER FOR PORTABILITY. MODEL ATWR-WL OPTIONAL WELDED FORK POCKETS, 7"W x 2"H, MODEL ATWR-FP PORTABLE WHEEL RISER CADDY, MODEL R-CAD-18, for 18" wide units PORTABLE WHEEL RISER CADDY, MODEL R-CAD-24, for 24" wide units PAIR OF BOLT-ON BRACKETS AND HARDWARE, MODEL R-CAD-KIT ANCHOR BRACKETS (4 PER RISER) TO BOLT RISER TO GROUND, MODEL ATWR-ABRK, FACTORY INSTALLED
NOTE: DUAL WHEELS ON SEMI-TRAILERS ARE 18" WIDE. THE 24" WHEEL RISERS WORK BEST FOR THIS APPLICATION.
WHEEL RISERS ARE PRICED AND SOLD EACH
model R-CADR-CAD-KIT
Equipped with fork slots for ease in fork truck transporting. Ramps may be stacked for compact storage when not in use. Fork pockets are 7" wide by 2" high usable. ese fork pockets add approximately 15" to the overall width of the riser. Wheel Risers are designed to raise the trailer for loading and unloading to facilitate compliance with OSHA/ANSI B56.1 part 3 sec 7 requirements for maximum grade of ascending or descending loaded fork trucks. Heavy-duty welded steel construction. Uniform capacity per pair is 40,000 lbs. (" thick material).
HEIGHT OVERALL LENGTH LEVEL LENGTH MODEL NUMBER
18" WIDE
MODEL NUMBER
24" WIDE
6"
PORTABLE WHEEL RISER CADDY, CADD series R-CAD, move steel or aluminum risers out of the way with this easy to use mover. Snap roller into riser and away you go.
8"
10"
12"
CENTRAL PICK-UP LOOP, model SWR-CPL is used to connect two wheel risers (wheel risers priced separately). Allows fork trucks to easily position and move risers as one. Overall width is 102".
48" 60" 72" 84" 60" 72" 84" 96" 60" 72" 84" 96" 72" 84" 96" 108"
24" 36" 48" 60" 28" 40" 52" 64" 20" 32" 44" 56" 24" 36" 48" 60"
SWR-18-6-48 SWR-18-6-60 SWR-18-6-72 SWR-18-6-84 SWR-18-8-60 SWR-18-8-72 SWR-18-8-84 SWR-18-8-96 SWR-18-10-60 SWR-18-10-72 SWR-18-10-84 SWR-18-10-96 SWR-18-12-72 SWR-18-12-84 SWR-18-12-96 SWR-18-12-108
183 221 261 299 246 293 339 385 268 322 375 428 349 408 469 528
SWR-24-6-48 SWR-24-6-60 SWR-24-6-72 SWR-24-6-84 SWR-24-8-60 SWR-24-8-72 SWR-24-8-84 SWR-24-8-96 SWR-24-10-60 SWR-24-10-72 SWR-24-10-84 SWR-24-10-96 SWR-24-12-72 SWR-24-12-84 SWR-24-12-96 SWR-24-12-108
222 272 320 369 301 359 415 471 329 394 458 523 427 498 571 644
PORTABLE WHEEL RISER CADDY, MODEL R-CAD-18, for 18" wide units, (2 pair of brackets) PORTABLE WHEEL RISER CADDY, MODEL R-CAD-24, for 24" wide units, (2 pair of brackets) TWO PAIR OF BOLT-ON BRACKETS AND HARDWARE, MODEL R-CAD-KIT ANCHOR BRACKETS (4 PER RISER) TO BOLT RISER TO GROUND, MODEL SWR-ABRK, FACTORY INSTALLED CENTRAL PICKUP LOOP, MODEL SWR-CPL, ADDITIONAL NET WT. 186 LBS.
23
A) TELESCOPIC RAMP is constructed of lightweight aluminum extrusion. Top surface is serrated for positive traction.
storage and handling. Slip-resistant surface provides extra traction. Each ramp comes with 2 handles for easy positioning.
C) GRATE RAMP is a semi-permanent ramp that is ideal for high trac areas. Handrails are available.
D) ROLL-O-RAMP provides
TYPE
MODEL NUMBER
access over curbs. Wheels installed on curb of ramp for portability. Beveled edges create smooth transition between ramp and ground.
A B C C C D E
77/8" x 88" 77/8" x 120" 36" x 88" 36" x 132" 36" x 168" 36" x 48" 28" x 72"
RAMP-5077
78"
16"
50"
1,500 lbs.
250 lbs.
40
RAMP-72 RAMP-96
72" 96"
9" 9"
50/pr./UPS 60/pr./LTL
Hitch Lift
Heavy-duty 12 volt DC motorized hitch lift. Standard 2" receiver bar has multiple pin positions for dierent tailgate depths (extends out 52" when lowered and 47" when raised). Built-in adjustable limiting device to allow the matching up of the deck plate to the truck bed level or to ground level. 21 foot long cable set for battery connection. Two stage outrigger assemblies for added stability. Be sure to fold the deck plate up before driving away. Tie down straps should be used to secure load. Steel construction.
MODEL NUMBER PLATFORM SIZE (W x L) RAMP (W x L) UNIFORM CAPACITY (POUNDS) NET WT. (LBS.)
HL-55
28" x 25"
28" x 7"
550
136
815/16" 92" 4" 815/16" 144" 4" (8) " x 4" CONCRETE ANCHOR BOLTS
133 193 4
24
New
Protect hoses and cables from carts and other trac. Constructed of lightweight durable aluminum tread plate. All welded. e opening is available in spans of 4" to 16". (" thick plate)
UNIFORM CAPACITY (POUNDS) NET WT. (POUNDS)
New
FHCR-24-36-4 FHCR-24-40-8 FHCR-24-44-12 FHCR-24-48-16 FHCR-24-36-4-4H FHCR-24-40-8-4H FHCR-24-44-12-4H FHCR-24-48-16-4H FHCR-48-36-4 FHCR-48-40-8 FHCR-48-44-12 FHCR-48-48-16 FHCR-48-36-4-4H FHCR-48-40-8-4H FHCR-48-44-12-4H FHCR-48-48-16-4H
24" x 36" 24" x 40" 24" x 44" 24" x 48" 24" x 36" 24" x 40" 24" x 44" 24" x 48" 48" x 36" 48" x 40" 48" x 44" 48" x 48" 48" x 36" 48" x 40" 48" x 44" 48" x 48"
4" x 3" 8" x 3" 12" x 3" 16" x 3" 4" x 4" 8" x 4" 12" x 4" 16" x 4" 4" x 3" 8" x 3" 12" x 3" 16" x 3" 4" x 4" 8" x 4" 12" x 4" 16" x 4"
2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000
Designed to protect air lines, electrical cords and computer cables from damage by fork trucks, carts, and personnel. ese ramps have serrated edges for maximum traction and are lightweight for easy portability. Contact factory for special lengths up to 25 feet.
MODEL NUMBER OVERALL (W x H) LENGTH USABLE SPAN (W x H) SINGLE-WHEEL UNIFORM CAPACITY NET WT. (LBS.)
series HCR
WR-24 WR-36 WR-48 HCR-24 HCR-36 HCR-48 LHCR-36 LHCR-48 LHCR-60 LHCR-72 XHCR-36 XHCR-48 XHCR-60 XHCR-72
27/8" x 7/16" 27/8" x 7/16" 27/8" x 7/16" 7" x 11/8" 7" x 11/8" 7" x 11/8" 91/8" x 1" 91/8" x 1" 91/8" x 1" 91/8" x 1" 211/6" x 3" 211/6" x 3" 211/6" x 3" 211/6" x 3"
24" 36" 48" 24" 36" 48" 36" 48" 60" 72" 36" 48" 60" 72"
1" x 5/16" 1" x 5/16" 1" x 5/16" 2" x " 2" x " 2" x " 2" x 1" 2" x 1" 2" x 1" 2" x 1" 4" x 3" 4" x 3" 4" x 3" 4" x 3"
2,500 2,500 2,500 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000
2 4 5 7 11 14 14 19 24 29 53 71 88 105
model RHCB-12A
Designed to protect cables and hoses from pedestrian and rolling trac. e top surface of each bridge includes serrations for extra traction. Optional connectors may be used to interlock individual units together to form wider bridges. Simply lock together as many units as required. Model MRBR-24 has carrying handles molded into the ramp. Fits over cables to protect hoses from punctures and kinks. Series RHCB is ideal for people who are always switching out cables but do not want to move the ramp. e model RHCB-A features an aluminum tread plate insert to protect hoses and cables (for light trac and slow applications only).
MODEL NUMBER OVERALL SIZE (W x L) USABLE SPAN (W x H) UNIFORM CAPACITY (POUNDS) NET WT. (POUNDS)
CONNECTORS
2" x 1" CONNECTOR PER PAIR 3" x 27/8" 3" x 3" CONNECTOR PER PAIR
40 2 32 42 1
New
is product works well for temporary wire/cable protection from vehicles. Bottom openings are ".
TOP OPENING
5 8 5 8
UNIFORM CAPACITY
model C-75-24
12 24 12
20 40 50
25
MCHC-55
23"
35"
2"
20,000
55
Rubber Ramps
Modular rubber ramps are versatile for use in many applications. Two ramp lengths to choose from. Add round corner pieces for a nished look. Tread surface pattern for better traction. Includes hardware for connecting ramps together. Uniform capacity is 4,000 lbs. per ramp. Heavy-duty molded rubber construction.
MODEL NUMBER DESCRIPTION WIDTH DEPTH HEIGHT NET WT. (LBS.)
New
model RCR-35
16 24 5
model RCR-C
Cable Guard
Designed to protect hose and cable from roll-over damage. Ideal for oce and pedestrian applications. Interlocking design connects units for longer lengths. Top surface of ramp features anti-slip traction design. Manufactured from black molded rubber.
MODEL NUMBER OVERALL SIZE (W x L x H) USABLE SPAN (W x H) UNIFORM CAPACITY (POUNDS) NET WT. (LBS.)
New
MRHR-39
17/16" x "
2,200
20 30 40
LE
NG
TH
W
ID
TH
Multi-Purpose Ramps
High impact ramps are perfect for a variety of work environments; postal routes, schools, hospitals, warehouses and delivery routes. ese ramps make it simple to move loads onto a curb or over hoses and cables. e textured non-skid surface allows for sure footing on the incline and decline. e lightweight and completely portable unit handles hand trucks and other wheeled equipment with ease.
MODEL NUMBER MATERIAL WIDTH LENGTH HEIGHT UNIFORM CAPACITY NET WT. (LBS.)
PLASTIC model MPR-2310-G
PLASTIC 23" 10" 4" PLASTIC 23" 13" 5" PLASTIC 24" 10" 4" RUBBER 23" 9" 3" OPTIONAL BRIDGE KIT FOR MPR-2310-G, MPR-2410 or MRR-2310 OPTIONAL BRIDGE KIT FOR MPR-2313-G
5 9 18 7 5 6
BRIDGE KIT
New
SBR-120
21"
BLACK/YELLOW
30
26
New
Speed Bumps
Help control drivers in dangerous areas while protecting people and property. One person installation. Holds up under truck and semi-trailer trac. Can be removed for seal coating, snow removal, or change of location. Resists marring by oil, road salt, sunlight and chemicals. Asphalt kit includes spikes and butyl tape. Feature dual 1"W x "H cable channels and includes hardware. Constructed of lightweight recycled plastic. Compression strength is 3,200 lbs. per square inch. e concrete hardware kit includes bolts, anchors and washers. e glue down anchor plate kit includes anchor plates, T-nuts, bolts and washers. Requires two part epoxy which is not included.
MODEL NUMBER OVERALL SIZE (W x H x L) TYPE OF HARDWARE KIT INCLUDED NUMBER OF MOUNTING HOLES NET WT. (LBS.)
estil
model SBA-72
vestil
green
New
SB-48 SBA-48 SBG-48 SBD-48 SBDA-48 SBDG-48 SB-36 SBA-36 SBG-36 SB-72 SBA-72 SBG-72 SBD-72 SBDA-72 SBDG-72 SB-108 SBA-108 SBG-108 SBS-1012
10" x 2" x 48" CONCRETE 10" x 2" x 48" ASPHALT 10" x 2" x 48" GLUE-DOWN 12" x 2" x 48" CONCRETE 12" x 2" x 48" ASPHALT 12" x 2" x 48" GLUE-DOWN 10" x 2" x 72" CONCRETE 10" x 2" x 72" ASPHALT 10" x 2 " x 72" GLUE-DOWN 10" x 2" x 72" CONCRETE 10" x 2" x 72" ASPHALT 10" x 2" x 72" GLUE-DOWN 12" x 2" x 72" CONCRETE 12" x 2" x 72" ASPHALT 12" x 2" x 72" GLUE-DOWN 10" x 3" x 106" CONCRETE 10" x 3" x 106" ASPHALT 10" x 2" x 72" GLUE-DOWN REFLECTIVE SPEED BUMP SIGN
3 3 3 3 3 3 4 4 4 6 6 6 4 4 4 5 5 5
17 18 31 28 29 34 26 26 45 10 17 15 41 42 49 56 59 64 1
Speed Bumps
Increase pedestrian safety and control trac reducing vehicle speeds to 10 mph. Made from 100% recycled rubber tires. Our high-visibility black and yellow Speed Bumps eectively slow trac without vehicle or tire damage. Install easily with lag bolts simply drill a hole with a masonry bit, and penetrate the asphalt or concrete surface below. Embedded reective material increases visibility and safety, day or night. Hardware included. Made in USA.
MODEL NUMBER OVERALL SIZE (W x H x L) DESCRIPTION COLOR NET WT. (LBS.)
New
RSB-10C-GRN RSB-10E-GRN
BLACK/YELLOW BLACK/YELLOW
14 14
Speed Cushions
Safely control trac and reduce vehicle speeds to 20-30 mph with these speed cushions. Made from 100% recycled rubber tires, our high traction speed cushions are highly visible and extremely durable. Designed to slow trac while having a minimal eect on emergency response time. Easy to install with modular sections. Both concrete and asphalt hardware are included. Speed cushions are exible and conform to road curvature on any asphalt or concrete surface. Made in USA.
estil
green
series TCSC
MODEL NUMBER
OVERALL SIZE (W x H x L)
COLOR
TCSC-6-GRN TCSC-10-GRN
520 870
New
Car Stops prevent vehicles from damaging buildings, sidewalks, curbs, and delicate landscape. Indoors they function as bumper cushions and protectors for motorized carts, fork-lift trucks, and vehicles in factories and warehouses. 100% recycled rubber car stops are a durable, reliable, long-lasting alternative to traditional concrete stops. Stops are resistant to extreme temperature variations, UV light, oil, and moisture. Easy to maintain. Will not crack, break, rot, or disintegrate. Made in USA.
MODEL NUMBER OVERALL SIZE (W x H x L) REFLECTIVE STRIPE COLOR NUMBER OF HOLES NET WT. (LBS.)
6" x 4" x 72" NONE 5 6" x 4" x 72" YELLOW 5 6" x 4" x 72" WHITE 5 6" x 4" x 72" BLUE 5 ASPHALT HARDWARE (5 NEEDED PER CAR STOP) CONCRETE HARDWARE (5 NEEDED PER CAR STOP)
38 38 38 38 1 1
27
Car Stops
Protecting people and property from drivers in dangerous areas. Constructed of lightweight recycled plastic. One person installation. Can be removed for seal coating, snow removal, or change of location. Resists marring by oil, road salt, sunlight and chemicals. Resists rotting, termite damage and corrosion. No costly painting or maintenance. Asphalt kit includes spikes and butyl tape. e concrete hardware kit includes bolts, anchors and washers. e glue down anchor plate kit includes anchor plates, T-nuts, bolts and washers. Requires two part epoxy which is not included. Hardware kits sold separately.
MODEL NUMBER OVERALL SIZE (W x H x L) COLOR NUMBER OF MOUNTING HOLES NET WT. (LBS.)
vestil
green
series CS-33
New
CS-33-G CS-33-Y CS-33-B CS-33-W CS-33-BL CS-S48-G CS-S48-Y CS-S48-B CS-S48-W CS-S72-G CS-S72-Y CS-S72-B CS-S72-W CS-TB96-G CS-TB96-Y CS-TB96-B CS-TB96-W
MODEL NUMBER
6" x 3" x 72" 6" x 3" x 72" 6" x 3" x 72" 6" x 3" x 72" 6" x 4" x 71" 6" x 4" x 48" 6" x 4" x 48" 6" x 4" x 48" 6" x 4" x 48" 6" x 4" x 72" 6" x 4" x 72" 6" x 4" x 72" 6" x 4" x 72" 10" x 7" x 96" 10" x 7" x 96" 10" x 7" x 96" 10" x 7" x 96"
GRAY YELLOW BLUE WHITE BLACK GRAY YELLOW BLUE WHITE GRAY YELLOW BLUE WHITE GRAY YELLOW BLUE WHITE
3 3 3 3 4 2 2 2 2 3 3 3 3 4 4 4 4
USE WITH ABOVE NO. OF MOUNTING HOLES
New
model CS-33-BL
DESCRIPTION
ASPHALT HARDWARE KIT CONCRETE HARDWARE KIT GLUE DOWN ANCHOR PLATE ASPHALT HARDWARE KIT CONCRETE HARDWARE KIT GLUE DOWN ANCHOR PLATE ASPHALT HARDWARE KIT CONCRETE HARDWARE KIT GLUE DOWN ANCHOR PLATE
2 2 2 3 3 3 4 4 4
2 3 4 3 4 5 4 5 6
New
series RSH
series RSH-GRN
MINI RUBBER SPEED HUMPS 18" x 24" x 2" RSMH-18C-GRN 18" x 24" x 2" RSMH-18E-GRN MEDIUM RUBBER SPEED HUMPS 36" x 24" x 2" RSH-36C-GRN 36" x 24" x 2" RSH-36E-GRN DELUXE RUBBER SPEED HUMPS 24" x 108" x 1.2" RSH-108-24-C 24" x 108" x 1.2" RSH-108-24-A 36" x 120" x 2" RSH-120-36-C 36" x 120" x 2" RSH-120-36-A
CENTER SECTION END SECTION CENTER SECTION END SECTION COMPLETE MODULE COMPLETE MODULE COMPLETE MODULE COMPLETE MODULE
28
Two speed, 115V, 1 phase, ball bearing, totally enclosed and permanently lubricated Industrial Duty Circulator Fan. Pull chain switch with a 12 foot long cord and an SJT type 3 conductor cord. Meets OSHA standards and is ETL & C/UL listed. HP electric motor.
MODEL NUMBER BLADE DIAMETER MOUNTING STYLE AMPS HIGH CFM HIGH CFM LOW NET WT. (LBS.)
ICRF-24-P ICRF-24-W ICRF-30-P ICRF-30-W OSCILLATING STYLE ICRF-24-PO ICRF-24-WO ICRF-30-PO ICRF-30-WO
75 45 78 48 79 49 82 52
Two speed, 115V, 1 phase, ball bearing, totally enclosed and permanently lubricated Industrial Duty Circulator Fan. Pull chain switch with a 12 foot long cord and an SJT type 3 conductor cord. Meets OSHA standards and is ETL & C/UL listed. HP electric motor.
MODEL NUMBER BLADE DIAMETER MOUNTING STYLE AMPS HIGH CFM HIGH CFM LOW NET WT. (LBS.)
78 48 52 48
ree speed, 115V, 1 phase, totally enclosed, permanently lubricated motor Work Station Fan. Mount with one bolt or lag screw to walls, ceilings, work benches, machines or any surface. Pull chain switch on a 10 foot long SJT type 3 conductor cord. Meets OSHA standards and is ETL & C/UL listed.
MODEL NUMBER
model WSF-12 model WSF-18-F
BLADE DIAMETER
MOUNTING STYLE
AMPS HIGH
CFM HIGH
CFM MED
CFM LOW
13 20 20
Two speed, 115V, 1 phase, ball bearing, totally enclosed motor. Rocker switch. 15' SJT type 3 conductor power cord. 3 paddle style steel blades. 8" rubber wheels. Meets OSHA standards. ETL & C/UL listed.
AMP HIGH CFM HIGH CFM LOW NET WT. (LBS.)
DDB-36
36"
1100
5.6
12500
9000
82
Inside-building installation only with vents outside. Eliminate need for external framing and shutter. Ideally suited for thin wall buildings. Units are 115V, 1 phase totally enclosed and permanently lubricated. Pull chain switch. No cord. Junction box provided for direct wiring. Meets OSHA standards.
MODEL NUMBER BLADE DIAMETER MOTOR HP AMPS HIGH CFM HIGH CFM MED CFM LOW NET WT. (LBS.)
16 25 47 54
New
Lower winter heating costs by recovering residual heat trapped at roof level. Fully assembled except blade bolt down, 3 conductor power cord is 3 foot long with plug. All metal construction, with white epoxy nish and aluminum paddles. Fan has 18" down rod with safety cable. Speed controls and reversion switches available, please contact factory.
MODEL NUMBER TYPE SIZE VOLTAGE/PHASE CFM NET WT. (LBS.)
20 21 21
29
New
Two speed, 115V, 1 phase, ball bearing Commercial Circulator Fan. Pull chain switch with a 9 foot long cord and an SJT type 3 conductor cord. Meets OSHA standards and is UL & C/UL listed. HP electric motor. These Circulator Fans do not have a totally enclosed motor. They should be used in a clean and dry commercial application.
MODEL NUMBER BLADE DIAMETER MOUNTING STYLE AMPS HIGH CFM HIGH CFM LOW NET WT. (LBS.)
63 43 66 46
Two speed, HP, 115V, 1 phase, ball bearing motor. Rocker switch. 8 foot long SJT type 3 conductor cord. 3 paddle style steel blades. 8" rubber wheels. Meets OSHA standards and is UL listed. ese Portable Blowers do not have a totally enclosed motor. ey should be used in a clean and dry commercial application.
MODEL NUMBER BLADE DIAMETER AMP HIGH CFM HIGH CFM LOW NET WT. (LBS.)
New
DDB-C-42
42"
4.3
13500
11000
93
New
model MB-C-30
Two speed, 1/3 HP, 115V, 1 phase, ball bearing motor, permanently lubricated. Rocker switch (MB-C-30) or rotary switch (MB-RS-C-36) standard. 6 foot long SJT type 3 conductor cord. Meets OSHA standards and is UL listed. ese Direct Drive Blowers do not have a totally enclosed motor. ey should be used in a clean and dry commercial application.
MODEL NUMBER BLADE DIAMETER AMPS HIGH CFM HIGH CFM LOW NET WT. (LBS.)
MB-C-30 MB-RS-C-36
30" 36"
3.6 3.6
6300 8200
60 70
model MB-RS-C-36
ree speed, 1/5 HP, 115V, 1 phase, permanently lubricated motor. Rotary switch. 7 foot long SJT type 3 conductor cord. Meets OSHA standards and is UL listed. These floor fans do not have a totally enclosed motor. They should be used in a clean and dry commercial application.
MODEL NUMBER BLADE DIAMETER CFM HIGH CFM MED CFM LOW NET WT. (LBS.) LIST PRICE EACH
New
model FF-C-20
FF-C-20
20"
3450
3100
2950
17
$81.00
ese Portable Evaporative Coolers have large internal water reservoirs that allow units to operate approximately 8 hours without being connected to an external water source. Water is supplied to the internal tank from a standard " water hose or from optional water tank. Water level in internal tank is controlled by the unit's oat valve. Maintenance free submersible water pump. 8" thick evaporative media is easily accessible for routine maintenance. Roto-molded corrosion free polyethylene housing. 20 foot long, 16 ga. 3 conductor cord with GFCI plug. ermally protected, permanently lubricated fan motor. Variable speed on 36" unit / 2 speed on 16" unit. Weather tight fan and pump control switches. 4" heavy-duty casters; 2 locking, 2 non-locking. ETL listed and meets OSHA specications.
MODEL NUMBER BLADE SIZE MOTOR HP UNIT AMPS CFM HIGH CFM LOW EFFECTIVE SQ. FEET
New
model TS-EVAP-16
model TS-EVAP-36
OVERALL SIZE (W x L x H)
16" 36"
4.6 2500 3900 900 42 gal. 23" x 37" x 59" 11.5 9600 4800 2500 32 gal. 32" x 62" x 67" OPTIONAL POLYETHYLENE WATER TANK WITH METAL STAND (60 gal.)
145 245 65
30
New
model PACU-24
MODEL NUMBER
CFM
OVERALL SIZE (W x L x H)
110V, 1PH 110V, 1PH 110V, 1PH 240V, 1PH 480V, 3PH
17" x 19.9" x 43.3" 22" x 24.4" x 50.4" 22" x 24.4" x 50.4" 26" x 33.3" x 52.4" 28.9" x 51.5" x 59.8"
New
e Portable Electric Salamander is the perfect odorless, ameless electric alternative to propane and kerosene space heaters. Safety yellow heater enclosure with safety screens on both air intake and output openings. ese units include long-life nned tubular heating elements, thermostat adjustment from 40 to 100 degrees Fahrenheit, and a fan only operating feature. Includes access panel for direct wiring connections and 10" wheel and handle for easy portability over all surface types. Units are ETL C/U.S. listed. Power cord sold separately, see below.
MODEL NUMBER DESCRIPTION KW AMPS VOLTS PHASE TEMP RISE NET WT. (LBS.)
PORTABLE HEATER PORTABLE HEATER PORTABLE HEATER PORTABLE HEATER PORTABLE HEATER PORTABLE HEATER
45 45 45 45 90 30
65 69 65 65 83 60
*FACTORY PRE-WIRED WITH 10' CABLE & STRAIGHT BLADE RANGE PLUG
4/3 SO, POWER CORD 6/4 SO, POWER CORD 12/4 SO, POWER CORD
1-PHASE STANDARD
model CRFH-198
model FFH-118
Portable electric heaters are lightweight, and have an easy grip handle for convenience. ese heaters are perfect for oce, or small spot heating applications. ey include a 6 foot long, 3 conductor cord, and temperature control thermostat. Model CFFH-240 has a two 20 amp plug conguration, which is great for construction sites. Model FFH-118 and CRFH-198 meet OSHA standards and are UL & C-UL listed while CFFH-240 is only UL listed.
MODEL NUMBER OVERALL SIZE (W x D x H) NUMBER OF SETTINGS VOLTAGE/PHASE BTU's NET WT. (LBS.)
New
model CFFH-240
10" x 9" x 16" FFH-118 11" x 12" x 15" CRFH-198 CFFH-240 105/8" x 10" x 12"
9 9 15
Provide instant, odor-free heat for indoor and outdoor workstations and warehouse areas. Economical electric infrared heat warms only persons and objects, not the air volume. Durable U-shaped heavy-duty metal sheath heating elements are designed with an imbedded nichrone coil. All models have gold anodized aluminum reectors, weather tight terminal box, protective wire screens, and reinforced front edge and corner construction. Heaters can be adjusted on the hand cart to operate in a horizontal or vertical position for maximizing the infrared heating pattern. Carts consist of a rugged steel design and are equipped with 6" rubber wheels and twin hand grips. Heaters are factory wired for three phase, but can be converted to single phase for most units.
MODEL NUMBER KW BTU's VOLTS PHASE AMPS NET WT. (LBS.)
3 3 3 3
37 37 65 65
31
Radiant heat can be adjusted in distance and height. Adjustable brightness for various applications. Requires 220V single phase power supply @ 15 amps. Portable with four swivel casters (two with brakes). Timer is included for auto-shut o.
MODEL NUMBER MAXIMUM POWER OUTPUT LAMP ELEMENTS ELEMENT OVERALL SIZE (W x H x D) ELEMENT EACH SIZE (W x H x D) NET WT. (LBS.)
3 4 6
New
High intensity "medium wave" technology used for many applications such as: curing coatings and adhesives, laminating, heat shrinking and drying. Gentle but eective medium wave radiant heat can quickly boost, ash-o, or cure a variety of nishes, and lessens the chance of blistering and/or overheating the coating. Portable panels are built to withstand rigors of industrial and heavy-commercial applications, and come standard with 20' of type SO cable. Heating elements achieve full temperatures in less then 1 to 2 minutes, and are rated for an average life expectancy of 5,000 hours. Units are easily positioned with adjustable hinges allowing the user to precisely direct heat to the target area. Gold anodized aluminum reectors and end caps allow 10% faster cure time than polished aluminum reectors.
MODEL NUMBER OVERALL SIZE (W x D) HEATED AREA (W x H) VOLTAGE AMPS HEAT SOURCES NET WT. (LBS.)
New
model PIHP-4
20 26.7 46.7
4 4 7
1-PHASE STANDARD
model PIHP-11
Keep cool work areas well heated with these Infrared Heaters. e quartz tube radiates a blanket of heat in a 60 symmetrical pattern. Unit includes; gold aluminum reector and end caps, mounting chains, S hooks and a cord set with plug. Units can be hung from the ceiling with mounting chains. For indoor use. Meets OSHA standards and is ETL C/U.S. listed.
MODEL NUMBER WATTS VOLTS PHASE BTU's NET WT. (LBS.)
1500 3000
115 1 5120 240 1 10240 S.S. WIRE GUARDS (use with model VCH-46C) S.S. WIRE GUARDS (use with model VCH-57C)
9 11 2 2
Portable heater adjusts from 2' to 6' in height. Wire guard is included, as well as a 15' cord set with plug (3 wire). Unit comes standard with four 2" casters. Meets OSHA standards and is ETL C/U.S. listed.
WATTS BTU's VOLTS PHASE NET WT. (LBS.)
model VCH-48-P
VCH-48-P
1500
5,120
115
30
New
Reduce broken bulb and high maintenance costs with LED Dock Loading Lights. ese use 80% less energy than incandescent or halogen bulbs. Achieves maximum light intensity instantly, and light is optimized for trailer illumination. ese LED lights have no fragile laments to break, eliminating the shattered glass of broken incandescent bulbs.
MODEL NUMBER DESCRIPTION ARM LENGTH NET WT. (LBS.)
New
vestil estil
green
11 18 21 2
model LL-LED-40
32
Lights minimize freight damage while expediting loading and unloading operations. Designed to provide uniform visibility inside trailers or around dock areas. Model LL-SAI and LL-SAF are ETL C/U.S. listed while all others are UL listed. Incandescent Lights, series LL and LL-SAI, oer good color, low replacement cost and turn on instantly even in cold environments. It utilizes a 90 watt bulb, model PAR-38-90, sold separately. Adjustable arm knuckle joint allows vertical and horizontal positioning. Halogen Incandescent Light, model HLGN-40, typically provides more lumens/watt, better energy eciency, has a longer service life and experiences less light depreciation over its lifetime. It is supplied with a 500 watt bulb. Full illumination is instantaneous. High Pressure Sodium Lights, series LLS and AALLS, oer much higher lumens/watt output and a very long lamp life. Its illumination color rendition (yellowish) is not as desirable as an incandescent. ey typically require several minutes to fully illuminate, and even longer if in a cold environment. Low operating cost. Spun Aluminum Dock Lights, series LL-SAI and LL-SAF, stay cool to the touch even with a 300 watt incandescent light. Features strut arm with both horizontal and vertical adjustment. Available in a standard incandescent lamp head and a uorescent lamp head. Fluorescent units include a bulb and head.
MODEL NUMBER
DESCRIPTION
LENGTH
LL-24 LL-40 LL-60 LL-90 LL-SAI-40 LL-SAI-60 HLGN-40 LL-SAF-40 LL-SAF-60 LLS-24 LLS-40 LLS-60 LLS-90 AALLS-40 AALLS-60
MODEL NUMBER
INCANDESCENT, SINGLE ARM INCANDESCENT, DOUBLE ARM INCANDESCENT, DOUBLE ARM INCANDESCENT, TRIPLE ARM INCANDESCENT, SINGLE STRUT ARM INCANDESCENT, SINGLE STRUT ARM HALOGEN INCANDESCENT, DOUBLE ARM FLUORESCENT, SINGLE STRUT ARM FLUORESCENT, SINGLE STRUT ARM HIGH PRESSURE SODIUM, SINGLE ARM HIGH PRESSURE SODIUM, DOUBLE ARM HIGH PRESSURE SODIUM, DOUBLE ARM HIGH PRESSURE SODIUM, TRIPLE ARM HIGH PRESSURE SODIUM, ADJUSTABLE ARM HIGH PRESSURE SODIUM, ADJUSTABLE ARM
24" 40" 60" 90" 40" 60" 40" 40" 60" 24" 40" 60" 90" 40" 60"
19 22 28 42 11 15 20 11 15 19 22 28 42 19 22
NET WT. (POUNDS)
DAMP LOCATIONS
DRY LOCATIONS
DESCRIPTION
90 WATT HALOGEN BULB, 1270 LUMENS (LL) SODIUM BULB - 50 WATT FLUORESCENT BULB - 55 WATT SODIUM HEAD ONLY WIRE GUARD - 6" DIAMETER (INCANDESCENT) GRILL / DIFFUSER (SODIUM) LIGHT STAND, 83" HIGH, INCLUDES ADJUSTABLE BRACKET 18" FAN, MOUNTING BRACKETS AND POWER CORD PACKAGE: LL-40 LIGHT, FAN, BRACKETS AND WIRING
1 2 2 13 1 1 60 30 78
Superior lighting at the job-site assures worker safety plus accurate loading and unloading. ese premium lights are UL listed and CSA certied. 500 watt halogen bulb included providing 11,000 lumens.
DESCRIPTION MOUNTING STYLE LIGHT BULBS NET WT. (POUNDS)
MODEL NUMBER
HLGN-FWL HLGN-PWL
model HLGN-PWL
FLOOR PEDESTAL
6 21
33
Cargo Bars
Keep trailer contents in place -- eliminate damaged goods Simple mechanical lock - will not vibrate loose
During transport, keep trailer contents securely in place with these easy to use Cargo Bars. Constructed of 1" square tubing, unless specied. 14 gauge wall construction is lightweight yet extremely strong. Square articulating steel end plates feature rubber pads for positive gripping action. End plates measure 4" x 4" on models CL-15, CL-16, CL-17, CL-18 and CBH-32. End plates measure 4" x 2" on model CB-7, CB-7-R and CB-7-S. Bars t between trailer walls.
A) CB-5 & CB-7 B) CB-7-R C) EB-96 & EB-102 L) E-TRACK
Easy to use ratchet mechanism allows one person to adjust and ratchet into place.
M) CB-HLDR
D) CB-7-S
F) CL-17
G) CL-18
H) CL-20
New
MODEL NUMBER SERVICE RANGE NET WT. (LBS.)
TYPE
DESCRIPTION
A A B C C D E E F G H I J K L M
CB-5 CB-7 CB-7-R EB-96 EB-102 CB-7-S CL-15 CL-16 CL-17 CL-18 CL-20 CBH-32 CH-7 CH-3 E-TRACK CB-HLDR
ONE PIECE ALUMINUM (ROUND TUBE) ONE PIECE ALUMINUM Heavy-Duty ONE PIECE ALUMINUM RATCHET (ROUND TUBE) ONE PIECE ALUMINUM (E-TRACK) ONE PIECE ALUMINUM (E-TRACK) ONE PIECE STEEL (ROUND TUBE) ONE PIECE STEEL ONE PIECE STEEL GALVANIZED TWO PIECE STEEL GALVANIZED (FOLDING) TWO PIECE STEEL GALVANIZED (TELESCOPIC) TWO PIECE STEEL E & A TRACK END PADS ONE PIECE STEEL WITH FULL HOOPS GALVANIZED HOOPS (FOR CB SERIES ONLY) GALVANIZED HOOPS (FOR CL SERIES ONLY) STEEL SECTION OF E-TRACK FOR TRAILERS CARGO BAR HOLDER
88" to 103" 89" to 104" 89" to 103" 85" to 96" 92" to 102" 88" to 103" 87" to 119" 87" to 119" 88" to 116" 90" to 139" 87" to 116" 87" to 116" 24"W x 29"H 28"W x 25"H 10 FOOT
11 13 16 19 22 14 20 22 22 33 22 42 15 19 17 7
J & K) Cargo Bar Hoops model CH-7 for CB series Cargo Bars model CH-3 for CL series Cargo Bars (cargo bars sold separately, hoops sold in pairs)
Cargo Strapping
Guard against damages from slipping and shifting loads while transporting products Tough strapping fabric is made of a polyester webbing
FLAT END HOOK END
Tighten securely around cargo to help prevent damage and load shifting during transit. Spring loaded e-track ttings provide quick one-handed connection to anchor point. Both ratchet and cam buckle models tighten and release quickly. Edge Guards are reusable, durable, and economical.
MODEL NUMBER STRAP WIDTH WORKING LENGTH UNIFORM WORKING LOAD TIGHTENING MECHANISM FASTENER
model STRAP-27-FH
model STRAP-27-RH
STRAP-12-RE STRAP-16-CE STRAP-16-RE STRAP-27-RH STRAP-27-FH STRAP-6-RTO E-CLIP-W E-CLIP-D EDGE-R12 EDGE-R6 EDGE-S7
2" 12' 1,000 RATCHETING E-CLIP 2" 16' 1,200 CAM E-CLIP 2" 16' 1,200 RATCHETING E-CLIP 2" 27' 3,325 RATCHETING ROD HOOK 2" 27' 3,325 RATCHETING FLAT HOOK 2" 6" 800 D-RING/STRAP E-CLIP BEAM E-SOCKET SUPPORTS THE END OF WOOD 2 x 4 TIE OFF THE "D" RING WHEN ATTACHED TO THE E-TRAC K RUBBER EDGE GUARDS, 5"W x 12"L, 50 PIECES PER PACKAGE RUBBER EDGE GUARDS, 4"W x 6"L, 100 PIECES PER PACKAGE STEEL EDGE GUARDS, 7"W x 4"L, 10 PIECES PER PACKAGE
4 4 4 10 10 1 2 2
46 31 15
model STRAP-6-RTO
model E-CLIP-W
model E-CLIP-D
34
REUSABLE BAG 48" x 36" REUSABLE BAG 48" x 84" AIR BAG INFLATION VALVE
1 2 1
Cushion and protect furniture, machinery, and electronic equipment. Each pad measures 72" wide by 80" long. Model QPC-7280-UP is water and mildew resistant. Units are sold in quantities of 12 and the weights below reect a dozen units.
MODEL NUMBER DESCRIPTION NET WEIGHT (POUNDS)
New
PADLOCK CK NOT INCLUDED CLUDED
GENERAL DUTY (both sides cotton) ALL WEATHER (both sides polyester) HEAVY-DUTY (one side polyester/other side cotton)
64 82 79
Used for chain binding applications in trucking and marine industries. Heavy-duty, forged steel construction. Uniform proof capacity is 10,000 pounds. Ultimate uniform capacity is 19,000 pounds. Accommodates 5/16" to " chain. Insert lock through hole for maximum theft protection.
MODEL NUMBER
LEVER TYPE model LBDR-13-L RATCHET TYPE model LBDR-9-L
DESCRIPTION
TAKE UP
LBDR-9-L LBDR-13-L
LEVER RATCHET
3" 3"
10 15
DESCRIPTION
OVERALL SIZE (W x L x H)
WELD ON WINCH BOLT ON WINCH MULTI-TASK WINCH BAR PAINTED WINCH BAR 30 FOOT STRAP
3" x 7" x 6" 3" x 7" x 6" 1" DIA. x 36"L 1" x 33" 4" W x 30'L
12 14 7 5 7
Pallet Pullers
PAL-12 PAL-16
PAL-14
Pallet pullers are used to pull pallets to rear of trailers for easy fork truck access. Rugged steel construction. Heads are self-cleaning and unaected by wood particles, paint or grease. Pallet pullers are NOT designed for lifting. PAL-12 and PAL-16 - Single scissor action allows for wider jaw opening. PAL-14 - Cam closing action provides maximum gripping strength and reduces pinch points. Safety handle enables easier positioning and removal. Grips both metal and wood pallets with biting action. PAL-21 and PAL-LP - One piece curved heads have integral spurs for gripping pallet stringers.
MODEL NUMBER DESCRIPTION UNIFORM PULLING CAPACITY JAW HEIGHT JAW OPENING NET WT. (LBS.)
SINGLE SCISSOR HEAVY-DUTY SINGLE SCISSOR CAM ACTION DOUBLE SCISSOR LOW PROFILE DOUBLE SCISSOR 20' OF " CHAIN W/GRAB HOOKS 40' OF " CHAIN W/GRAB HOOKS
5,000 lbs. 6,000 lbs. 5,000 lbs. 5,000 lbs. 5,000 lbs. 6,000 lbs. 6,000 lbs.
14 16 17 25 24 17 32
35
Prylever Bars
Provide dock workers, riggers, and freight handlers with the leverage needed to get underneath heavy objects for transporting with fork truck, hand truck, pallet truck, or machinery movers. Two 5" x 2" poly-on-steel wheels. 6"W x 8"L (3" usable) x " thick steel nose plate with beveled edge is bolted on the wood handle units and welded on the steel units. Steel units feature powder coat blue nish.
MODEL NUMBER DESCRIPTION BAR LENGTH UNIFORM CAPACITY (POUNDS) NET WT. (LBS.)
WOOD HANDLE series PLB STEEL HANDLE series PLB/S
WOOD PRYLEVER BAR WOOD PRYLEVER BAR WOOD PRYLEVER BAR STEEL PRYLEVER BAR STEEL PRYLEVER BAR STEEL PRYLEVER BAR
31 32 34* 37 42 47*
Pallet Buster
Get rid of broken or unsightly pallets quickly and safely. Lightweight and easy to use. Unique dual prying action with nail puller. Also can be utilized for dockboard removal.
MODEL NUMBER DESCRIPTION BAR LENGTH HANDLE DIAMETER NET WT. (LBS.)
SKB-7
PALLET BUSTER
41"
1"
New
SERRATED BOTTOM
A) LWC-15
B) LWC-14
C) LWC-14M
D) RWC-8
E) RWC-8-HDL
F) ORWC-8-HDL
G) RWC-9-U
H) RWC-8-SBS
TYPE
MODEL NUMBER
DESCRIPTION
DIMENSIONS (W x H x D)
A B C D E F G H I J K L M N O P Q R
LWC-15 LWC-14 LWC-14M RWC-8 RWC-8-HDL ORWC-8-HDL RWC-9-U RWC-8-SBS RWC-25 RWC-5 RWC-11 RMC-4 EX-4 EX-11 EX-13 RWC-2-PR AC-13 AC-18
LAMINATED RUBBER LAMINATED RUBBER LAMINATED RUBBER (RUBBER GRIPS) MOLDED RUBBER (EYEBOLT) MOLDED RUBBER (HANDLE) MOLDED RUBBER (ORANGE) MOLDED RUBBER ("U" HANDLE) MOLDED RUBBER (SERRATED BOTTOM) MOLDED RUBBER (JUMBO) MOLDED RUBBER (MOLDED HANDLE) MOLDED RUBBER (WHC-MR) EXTRUDED RUBBER EXTRUDED RUBBER EXTRUDED RUBBER EXTRUDED RUBBER RUBBER W/ROPE CONNECTED AIRLINE CHOCK WITH ROPE AIRLINE CHOCK WITH ROPE
8" x 8" x 8" 10" x 5" x 10" 10" x 5" x 10" 9" x 6" x 8" 9" x 6" x 8" 9" x 6" x 8" 9" x 6" x 8" 9" x 6" x 8" 16" x 8" x 12" 6" x 4" x 8" 7" x 7" x 10" 6" x 4" x 4" 10" x 3" x 4" 8" x 6" x 8" 12" x 5" x 6" 5" x 4" x 8" 10" x 4" x 5" 18" x 5" x 6"
18 17 17 10 12 12 11 14 22 5 13 5 12 13 16 7 16 33
I) RWC-25
J) RWC-5
K) RWC-11
L) RMC-4
M) EX-4
N) EX-11
O) EX-13
P) RWC-2-PR
Q) AC-13
R) AC-18
36
New
MODEL NUMBER
DESCRIPTION
DIMENSIONS (W x H x D)
COLOR
PWC-G PWC-Y
PLASTIC PLASTIC
GREEN YELLOW
6 6
TYPE
MODEL NUMBER
DESCRIPTION
DIMENSIONS* (W x H x D)
F) CWS-13
A B C D E F
CHOCK CHOCK WITH HAND GRIP YELLOW CHOCK CHOCK WITH HANDLE CHOCK W/HANDLE & SIGN ALUMINUM CHOCK W/FLAG
7" x 8" x 10" 7" x 8" x 10" 7" x 8" x 10" 7" x 8" x 10" 7" x 8" x 10" 7" x 8" x 10"
8 8 19 18 19 18
D) EALUM-7-H
E) EALUM-7-HS
G) FAB-8
I) FAB-11
H) FAB-10
TYPE
K) SSC-17
New
J) MS-15
G H I J K L M
WELDED STEEL CHOCK FABRICATED STEEL CHOCK FORMED STEEL CHOCK MOLDED CAST STEEL CHOCK CAST STEEL SLOPE CHOCK STEEL WHEEL CHOCK SERRATED STEEL CHOCK
7" x 8" x 7" 10" x 10" x 7" 8" x 9" x 10" 8" x 8" x 7" 8" x 8" x 15" 6" x 8" 17" 11" x 5" x 9"
10 12 13 18 20 26 10
New
MINI-URETHANE CHOCK URETHANE CHOCK URETHANE WITH HANDLE URETHANE WHEEL CHOCK JUMBO URETHANE CHOCK JUMBO CHOCK W/STEEL STUDS MEGA URETHANE CHOCK
7" x 6" x 8" 9" x 8" x 6" 9" x 8" x 6" 8" x 8" x 11" 14" x 14" x 17" 14" x 14" x 17" 18" x 18" x 24"
2 3 4 5 30 32 54
*MOLD-IN HOLE THROUGH WIDTH OF CHOCK FOR ATTACHING CHAIN (not included)
New
Ergonomically designed to make it easy to move wheel chocks in and out of position under trailer wheels. Reduce the risk of back, knee, and foot injuries. Handle is constructed of steel and includes a yellow powder coat nish. Factory installed only.
MODEL NUMBER TYPE OF WHEEL CHOCK WHEEL CHOCK (W x H x D) NET WT. (LBS.)
9" x 6" x 8" 9" x 6" x 8" 10" x 10" x 7" 8" x 9" x 10"
15 17 17 18
37
#2 DOUBLE LOOP COIL CHAIN (.091" THICK) WITH HANGER #2 CHAIN & HANGER, 15 FOOT LONG WITH REFLECTOR HD PROOF COIL CHAIN (3/16" THICK) 15' LONG W/HANGER ALUMINUM ENAMEL WHEEL CHOCK SIGN REFLECTIVE ALUMINUM ENAMEL WHEEL CHOCK SIGN VINYL WHEEL CHOCK STICKER
4 4 6 1 1 1
FRC-2
FLAG RAIL CHOCK W/ADJUSTABLE HEIGHT LEG SINGLE RAIL CHOCK SINGLE RAIL CHOCK / FLAG RAIL CHOCK COMBO SINGLE RAIL CHOCK / SINGLE RAIL CHOCK COMBO
10 8 18 16
SRC/FRC
2 3 5 10
Trailer Jacks
e trailer jack adjustable lift range provides easy hitching and unhitching of a loaded trailer. Use for a wide variety of lifting, leveling and adjustment applications. Ideal for industrial, utility, construction or agricultural equipment trailers. Heavy-duty construction. Available with a side or top crank position. Mounting bracket attaches in a variety of ways in order to meet your application needs. Scissor jacks provide stability and leveling to unattached trailers and equipment.
TYPE MODEL NUMBER MOUNT CRANK POSITION UNIFORM CAPACITY LIFT RANGE NET WT. (LBS.)
A B C
A B C D E F G H --I J K K
TJ-06 TJ-F3 TJ-F1 TJ-F2 TJ-F4 TJ-AF FJ-K1 FJ-K2 CT-02 CT-05 NJ-BP NJ-CR SJ-7523 SJ-7529
SIDE SWIVEL/WHEEL TUBE RING TUBE RING FLANGE FLANGE A-FRAME A-FRAME A-FRAME CRANK JACK CRANK JACK NOSE JACK BASE PAD NOSE JACK CASTER SCISSOR JACK SCISSOR JACK
SIDE TOP TOP TOP TOP TOP SIDE SIDE TOP TOP
1,000 2,000 1,000 1,000 2,000 2,000 1,000 2,000 2,000 5,000 --7,500 7,500
10" 15" 10" 10" 15" 10" 15" 15" 14" 14" --23" 29"
21 20 25 27 21 19 22 19 9 12 2 3 15 19
I
D&E
G&H
38
3 5 10 20
12 18 24 32
1.5 3 5
33 46 64
New
HDFJ-48 HDFJ-60
3.5 3.5
6" 6"
42" 53"
36" 47"
31 32
New
E-TKPL
3"
3"
Security Seals
New
Seal trailers, gates, hatches and doors with these general purpose security seals. Reveals the slightest tampering attempts. Two colors and four styles to choose from. Polypropylene construction. Sold only in packages of 100.
MODEL NUMBER STAMPED MARKINGS LENGTH SEQUENTIALLY NUMBERED NET WT. (LBS.)
SECS-B
SECS-F7
SECS-L11
SECS-P
SEALED - DO NOT REMOVE SEALED - DO NOT REMOVE SEALED SEALED SEALED SEALED SEALED SEALED
39
model SJS-1012
model SAJ-1012 F G H I J K L
TYPE
MODEL NUMBER
DESCRIPTION
SERVICE RANGE
A BIG FOOT JACK BFSJ-2748 RATCHET BEAM B LO-J-BEAM C SPIN TOP BEAM SP-TOP-BEAM D HYDRAULIC BEAM H-LO-J-BEAM HAND CRANK E CJ-BEAM-SN HAND CRANK E CJ-BEAM-PN RATCHET F LO-J RATCHET G HI-J SPIN TOP H SP-TOP RATCHET I SP-TOP-R ECONOMY (rounded base) J SJ-35 J ECONOMY (at base) SJ-40 K ECONOMY SJ-35-2H ECONOMY L SJ-35-EF TRAILER STABILIZING JACK OPTIONS
MODEL NUMBER DESCRIPTION
100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 100,000 50,000 50,000 50,000 50,000
40,000 40,000 40,000 40,000 50,000 50,000 40,000 40,000 40,000 40,000 5,000 5,000 5,000 5,000
39" to 51" 39" to 51" 39" to 51" 41" to 47" 41" to 55" 41" to 55" 39" to 51" 45" to 57" 39" to 51" 41" to 50" 44" to 51" 44" to 51" 44" to 51" 41" to 57"
NET WT. (LBS.)
10" hard rubber 10" x 2" hard rubber 10" x 2" hard rubber 10" x 2" hard rubber 16" solid foam 16" fully pneumatic 10" hard rubber 10" hard rubber 10" hard rubber 10" hard rubber N/A N/A N/A 8" hard rubber
125 160 160 228 210 210 110 115 110 115 45/UPS 45/UPS 45/UPS 60
50,000 POUNDS LIFTING CAPACITY (NOT AVAILABLE ON SJ series) ALUMINUM STABILIZING JACK TRAILER INSTRUCTION SIGN ALUMINUM DRIVERS BEWARE INSTRUCTION SIGN
18 1 1
Extruded Bumpers
Protect against the heavy impact and damaging results of semi-trailers and trucks with these Extruded Fender Bumpers. Made of all weather and abrasion resistant rubber. e half-oval shape allows for eective fendering action over a wide radius. A metal plate is located inside 4" and 6" projection bumpers for support while the 2" unit comes with one washer per hole (this does not include the 120" long models). Custom lengths available up to 10 feet. Installation hardware not included. Installation hardware available separately, see page 41.
TYPE MODEL NUMBER DESCRIPTION NET WT. (LBS.)
3/8" MOUNTING HOLES 5/8" ACCESS HOLE FOR FASTENERS
TYPE A M-2-SERIES
5/8" MOUNTING HOLES 1-1/4" ACCESS HOLE FOR FASTENERS
A A A A A B B B B B C C C C C
M-2-12 M-2-18 M-2-24 M-2-36 M-2-120* M-4-12 M-4-18 M-4-24 M-4-36 M-4-120* M-6-12 M-6-18 M-6-24 M-6-36 M-6-120*
12"L x 2"W x 1"H EXTRUDED BUMPER 18"L x 2"W x 1"H EXTRUDED BUMPER 24"L x 2"W x 1"H EXTRUDED BUMPER 36"L x 2"W x 1"H EXTRUDED BUMPER 120"L x 2"W x 1"H EXTRUDED BUMPER (NO HOLES) 12"L x 4"W x 4"H EXTRUDED BUMPER 18"L x 4"W x 4"H EXTRUDED BUMPER 24"L x 4"W x 4"H EXTRUDED BUMPER 36"L x 4"W x 4"H EXTRUDED BUMPER 120"L x 4"W x 4"H EXTRUDED BUMPER (NO HOLES) 12"L x 6"W x 6"H EXTRUDED BUMPER 18"L x 6"W x 6"H EXTRUDED BUMPER 24"L x 6"W x 6"H EXTRUDED BUMPER 36"L x 6"W x 6"H EXTRUDED BUMPER 120"L x 6"W x 6"H EXTRUDED BUMPER (NO HOLES)
2 4 6 8 20 6 12 16 24 60 11 16 20 31 110
TYPE B M-4-SERIES
5/8" MOUNTING HOLES 1-1/4" ACCESS HOLE FOR FASTENERS
*FOR 120" BUMPERS ADD $30.00 SKID CHARGE FOR ORDERS UNDER 5 UNITS
TYPE C M-6-SERIES
40
vestil
green
TYPE
A A A A A A A A A A A A A A A A C C B B B B
1012-4.5 1014-4.5 1018-4.5 1024-4.5 1030-4.5 1036-4.5 1096-4.5* 1212-4.5 1214-4.5 1218-4.5 1224-4.5 1230-4.5 1236-4.5 1296-4.5* 624-4.5 636-4.5 1014-4.5F 1214-4.5F V-1120-4.5 V-1124-4.5 V-1130-4.5* V-1136-4.5*
10" x 12" x 4" 10" x 14" x 4" 10" x 18" x 4" 10" x 24" x 4" 10" x 30" x 4" 10" x 36" x 4" 10" x 96" x 4" 12" x 12" x 4" 12" x 14" x 4" 12" x 18" x 4" 12" x 24" x 4" 12" x 30" x 4" 12" x 36" x 4" 12" x 96" x 4" 6" x 24" x 4" 6" x 36" x 4" 10" x 14" x 4" 12" x 14" x 4" 20" x 11" x 4" 24" x 11" x 4" 30" x 11" x 4" 36" x 11" x 4"
UPS UPS UPS UPS UPS UPS TRUCK UPS UPS UPS UPS UPS UPS TRUCK UPS UPS UPS UPS UPS UPS TRUCK TRUCK
29 32 36 47 60 72 216 30 35 42 57 66 85 333 32 45 32 36 48 57 72 86
A A A A A A A A A A A A A B B B B
1012-6 1014-6 1018-6 1024-6 1030-6 1036-6 1212-6 1214-6 1218-6 1224-6 1230-6 1236-6 1296-6* V-1120-6 V-1124-6 V-1130-6* V-1136-6*
10" x 12" x 6" 10" x 14" x 6" 10" x 18" x 6" 10" x 24" x 6" 10" x 30" x 6" 10" x 36" x 6" 12" x 12" x 6" 12" x 14" x 6" 12" x 18" x 6" 12" x 24" x 6" 12" x 30" x 6" 12" x 36" x 6" 12" x 96" x 6" 20" x 11" x 6" 24" x 11" x 6" 30" x 11" x 6" 36" x 11" x 6"
UPS UPS UPS UPS UPS UPS UPS UPS UPS UPS UPS TRUCK TRUCK TRUCK TRUCK TRUCK TRUCK
TYPE A
TYPE B
TYPE C
TYPE
MODEL NUMBER
TYPE D
TYPE E
A A B C D D E F G -----
B-1224-3 B-1224-6 T-22 B-1213-4 B-1213-4PF RF L-1818-4 B-516 B-818 B-516-SF B-818-SF
24"W x 12"H x 3"P - RECTANGULAR SHAPED BUMPER 24"W x 12"H x 6"P - RECTANGULAR SHAPED BUMPER 22"W x 22"H x 3"P - T-SHAPED MOLDED BUMPER 12"W x 13"H x 4"P - MOLDED BUMPER 12"W x 13"H x 4"P - PLASTIC FACE MOLDED BUMPER REPLACEMENT FACE (FOR B-1213-4PF ONLY) 18"W x 18"H x 4"P - L-SHAPED MOLDED BUMPER 16"W x 5"H x 2"P - RECTANGULAR SHAPED BUMPER 18"W x 8"H x 2"P - RECTANGULAR SHAPED BUMPER 5"W x 16"H x 2"P - STEEL FACED MOLDED BUMPER 8"W x 18"H x 2"P - STEEL FACED MOLDED BUMPER
33 55 43 24 24 1 36 7 14 24 44
TYPE F
TYPE G
New
50 25 15 10
12 14 15 14
41
2 4 5 6
TB-10 TB-20 TB-70 TB-90
7 14 20
4 5 7 11
BS-18
Installation Hardware
Installing bumpers is no longer a chore with concrete anchor bolts. Sold individually. Series DBK includes four of the following: " x 4" lag bolts, nuts, washers and anchor sleeves.
MODEL NUMBER CONCRETE ANCHOR BOLTS SIZE & BUMPER IT ACCOMMODATES NET WT. (LBS.)
New
LAMINATED BUMPERS, " x 4" MOLDED BUMPERS, " x 6" EXTRUDED BUMPERS, 5/8" x 4" (M-4 & M-6 series only) MASONRY BIT " DIAMETER DRILL BIT KIT WITH " MASONRY BIT HARDWARE KIT
1 1 1 1 5 5
model JAN-II
10 6 9
85 15 31
model JAN-SM model JAN-LG
42
New
TYPE C HANGING MAGNET RELEASE LEVER
A B C C D
MANUAL DROP LEVER PAN RELEASE LEVER RELEASE LEVER RELEASE LEVER
33 39 44 72 26
TYPE A ECONOMY
18 24
NET WT. (LBS.)
COLOR
YB-282-R YB-382-R
TYPE B DELUXE
2" 3"
82 FT. 82 FT.
YELLOW/BLACK YELLOW/BLACK
1 1
Line Markers
Type A - Lightweight applicator for marking paint lines on ground, trenches, construction and landscaping. Approximate stripe width is 1". Pull trigger to spray. Holds one standard inverted marking aerosol can of spray paint. Overall height is 37". Steel construction with painted nish. Type B - Economical applicator - simply pull trigger to mark paint lines on oors. Holds one standard aerosol can of inverted marking spray paint. Wheels assist with creating an even line approximately 1" wide. Steel construction with painted nish.
New
TYPE A TYPE B
TYPE
MODEL NUMBER
DESCRIPTION
A B
LINE-SA LINE-SA-W
4 5
SINGLE 90" x 57" x 48" DOUBLE DECKER 90" x 57" x 48" DOUBLE WITH SIDES 90" x 57" x 48" DOUBLE W/SIDES & BACK 90" x 57" x 48" OPTIONAL 10 GAUGE STEEL PLATFORM