Académique Documents
Professionnel Documents
Culture Documents
UNLIMITED DURABILITY.
FEATURES
All the power cylinders can be supplied with optional accessories shown in this catalogue. Some accessories are factory fitted. Some can be installed at the later stage. It is highly recommended that you consult ROTEX for complete installation, application, etc. Air lock relays are more practical to be considered during various power failure made.
POWER CYLINDER
Rotex power cylinder can be installed in various corrosive environments by selecting suitable material. Bellows and guards can be provided for physical protection.
MATERIAL OF CONSTRUCTION
Cover Tube Piston seal : : : Aluminium, CS SS 304 Aluminium, CS SS 304 NBR, Viton Rod seal Cushioning Bellows : : : Polyurathane Optional Neoprene
Cylinder Mountings as per ISO 6431 and ISO 6432. All accessories can be installed or dismantled without removing cylinder covers.
OPTIONS
MANUAL OVERRIDE
Latch wheel for auto/ manual Self locking on external force Safety key for excessive load Strokes upto 1800 mm Shaft made of special wear resistant steel for long life Type M01, M04, M06, HYMO
MANUAL OVERRIDE
Manual Override is used to operate the cylinder in an air failure mode. The latch wheel engages the lead nut. The handwheel rotates the Lead Screw. When the Screw rotates, the nut along with the arm moves the piston rod.
MATERIAL OF CONSTRUCTION
Body Shaft Bearing : : : Cast iron High-grade steel Sintered bronze
66
FILTER REGULATOR
40 standard filtration Autodrain on request Built in pressure gauge for easy reading Bowl with protection cover Size 1/4, 3/8, 1/2, 3/4 and 1
JUNCTION BOX
Provides 2 x NPT input connection 6-way connector strip for connection Switches are prewired with cable glands Housing, pressure diecast, Epoxy powder coated SS 316/ CF8M on request
POSITIONER
RYT - 1200R Cam operated feed back Reversible type, can be reversed at site Sensitivity 0.1% Repeatability 0.15% Input 3 - 15 psi RYT - 1000R with built in I/P convertor With input 4 - 20 mA. RYT Smart 2500R Sensitivity 0.1% Auto setup Programmable stops from 4 - 20 mA.
POSITIONER
MODEL Feed back Control Signal Nominal flow Consumed flow Sensitivity Weight Operating Temperature RYT 1200R Spring Pneumatic 0,2-1 bar or 3-15 psi 600 NI/ min < 15NI/ min < 0.005 bar 1.0 kg -10 C~70 C RYT 1000R Spring Electronic 4-20 mA or 0-10 V 600 NI/ min < 15NI/ min < 0.1 mA 1.0 kg -10C~70 C
67
EXTRA OPTIONS
LIMIT SWITCH
Rotex limit switch can be installed on cylinder directly. Switching elements can be microswitch or proximity switch.
MATERIAL OF CONSTRUCTION
Body Cam Gasket
: : :
Cam pin :
SIZES
32 mm to 500 mm, non cushioned type stroke up to 1500 mm.
68
ORDERING CODE
CYLINDER 1 1 CYLINDER
MOUNTING 2 SPC SCN C PISTON ROD CYLINDER MOUNTING SPECIAL 32 etc etc 1100 STROKE
DIAMETER 3
STROKE 4
MOUNTING
DIAMETER
STROKE
FILTER REGULATOR
Refer to Chapter FRL page 159 to 185
POSITION TRANSMITTER
TYPE Inductive Capacitance Digital RANGE Upto 1 km Upto 2 km Upto 20 km CODE PTR01 CTR01 DTR01
69