Vous êtes sur la page 1sur 4

Bengt Johansson/TUF

Chemical resistance of Wirsbo-PEX


The information in this table is based upon ISO/TR 10358:1993 and Borealis ART 254 1994 06, and should be considered as a general guideline only. For the best evaluation of each case, please contact Wirsbo with a specification of the fluids in contact with the pipe, the temperature, the pressure, and the environment for the installation. No guarantee of whatever kind can be given in respect of the information in this list. The data shown is based upon information available at the time of printing,but may be revised from time to time in the light of subsequent research and experience. Symbols used to describe the resistance: S: Satisfactory resistance L: Limited resistance NS: Not Satisfactory resistance Note: The resistance refers to pressureless applications only

the chemicals: con: concentrated sol: aqueous solution > 10%, but not saturated ss: saturated aq. solution, prepared at 20 C tg-g: technical grade - gas tg-l: technical grade - liquid wf: water free ws: working solution of the conc. usually used in the industry concerned

Chemicals

Kemikalier

Chemikalien

Conc. Temperature (%) 20C 60C


40 60 tg-l tg-l tg-l ss ss tg-g tg-l tg-l tg-l ws tg-l ss tg-l 100 100 ss sol ss tg-l tg-l 0.5 ppm tg-l S S S S S S S S S S S S NS S S S NS S S S S S L S L L S S NS L S L L S S S S S L L L NS S S NS S S L L S L S NS NS S L NS

Acetaldehyde Acetic acid Acetic anhydride Acetone Acrylonitrile Allyl alcohol Aluminium chloride Aluminium sulphate Ammonia Amyl acetate Amyl alcohol Aniline Aqua regia Beer Benzene Benzoic acid Bromine Butanol Butter Butyl acetate Butyric acid Calcium chloride Calcium hypochlorite Calcium nitrate Carbon disulphide Carbon tetrachloride Chlorine Chlorobenzene Chloroform

Acetaldehyd ttiksyra ttiksyraanhydrid Aceton Akrylnitril Allylalkohol Aluminiumklorid Aluminiumsulfat Ammoniak Amylacetat Amylalkohol Anilin Kungsvatten Pilsner Bensen Bensoesyra Brom Butanol Smr Butylacetat Smrsyra Kalciumklorid Kalciumhypoklorit Kalciumnitrate Koldisulfid Koltetraklorid Klor Klorbensen Kloroform

Acetaldehyd Essigsure Essigsureanhydrid Aceton Acrylnitril Allylalkohol Aluminiumchlorid Aluminiumsulfat Ammoniak Amylacetat Amylalkohol Anilin Knigswasser Bier Benzol Benzoesure Brom Butanol Butter Butylacetat Buttersure Calciumchlorid Calciumhypochlorit Calciumnitrat Kohlenstoffdisulfid Kohlenstofftetrachlorid Chlor Chlorbenzol Chloroform

2001-07-17

kemres09.xls

Page 1 (4)

Bengt Johansson/TUF

Chemical resistance of Wirsbo-PEX


The information in this table is based upon ISO/TR 10358:1993 and Borealis ART 254 1994 06, and should be considered as a general guideline only. For the best evaluation of each case, please contact Wirsbo with a specification of the fluids in contact with the pipe, the temperature, the pressure, and the environment for the installation. No guarantee of whatever kind can be given in respect of the information in this list. The data shown is based upon information available at the time of printing,but may be revised from time to time in the light of subsequent research and experience. Symbols used to describe the resistance: S: Satisfactory resistance L: Limited resistance NS: Not Satisfactory resistance Note: The resistance refers to pressureless applications only

the chemicals: con: concentrated sol: aqueous solution > 10%, but not saturated ss: saturated aq. solution, prepared at 20 C tg-g: technical grade - gas tg-l: technical grade - liquid wf: water free ws: working solution of the conc. usually used in the industry concerned

Chemicals

Kemikalier

Chemikalien

Conc. Temperature (%) 20C 60C


ss ss ss tg-l tg-l tg-l tg-l tg-l tg-l 100 100 tg-l tg-l 40 ws tg-l tg-l con 10 S S S NS S S S S S NS L S S NS S S S S NS S S S NS S S S S S S L S S NS L L L S L NS L S L NS S S NS NS S S L NS S S S S S

Chromic acid Citric acid Coconut oil, alcoholic Cyclohexane Cyclohexanol Cyclohexanone Decalin Detergents, synthetic Dibutyl phthalate Dichloroethylene Diesel oil Diglycolic acid Dimethyl formamide Dimethylamine Dioxane Ethanol Ethyl acetate Ethyl ether Ethylene chloride Ethylene diamine Ethylene glycol Fat Fluorine Formaldehyde Freon, F12 Glycerine Heptane Hydrochloric acid Hydrofluoric acid

Kromsyra Citronsyra Kokosntolja Cyklohexan Cyklohexanol Cyklohexanon Dekalin Detergenter, syntetiska Dibutylftalat Dikloreten Dieselolja Diglykolsyra Dimetylformamid Dimetylamin Dioxan Etanol Etylacetat Etyleter Etenklorid Etendiamin Etenglykol Fett Fluor Formaldehyd Freon, F12 Glycerin Heptan Saltsyra Fluorvtesyra

Chromsure Zitronensure Kokosl Cyclohexan Cyklohexanol Cyclohexanon Dekalin Detergentien, synt Dibutylphthalat Dichlorethylen Diesell Diglycolsure Dimethylformamid Dimethylamin Dioxan Ethanol Ethylacetat Ethylether Ethylenchlorid Etylendiamin Ethylglykol Fett Fluor Formaldehyd Freon; F12 Glycerin Heptan Salzsure Flourwasserstoffsure

2001-07-17

kemres09.xls

Page 2 (4)

Bengt Johansson/TUF

Chemical resistance of Wirsbo-PEX


The information in this table is based upon ISO/TR 10358:1993 and Borealis ART 254 1994 06, and should be considered as a general guideline only. For the best evaluation of each case, please contact Wirsbo with a specification of the fluids in contact with the pipe, the temperature, the pressure, and the environment for the installation. No guarantee of whatever kind can be given in respect of the information in this list. The data shown is based upon information available at the time of printing,but may be revised from time to time in the light of subsequent research and experience. Symbols used to describe the resistance: S: Satisfactory resistance L: Limited resistance NS: Not Satisfactory resistance Note: The resistance refers to pressureless applications only

the chemicals: con: concentrated sol: aqueous solution > 10%, but not saturated ss: saturated aq. solution, prepared at 20 C tg-g: technical grade - gas tg-l: technical grade - liquid wf: water free ws: working solution of the conc. usually used in the industry concerned

Chemicals

Kemikalier

Chemikalien

Conc. Temperature (%) 20C 60C


60 tg-g tg-l ss ss tg-l tg-l tg-l ws ws ws ws 25 50 100 tg-l ws ss tg-g 20 70 sol 50 S S S NS NS S S S S S NS S S S S S S NS NS S NS S S L S S S S S L S S NS NS S S S S S NS S S S L S L NS NS L NS NS S NS S S NS S S

Hydrofluoric acid Hydrogen sulphide Ink Iodine in alcohol Iodine in potassium Lactic acid Lead acetate Maleic acid Mercury Methyl alcohol Methyl chloride Methyl ethyl ketone Milk Mineral oil Motor oil Naphtha Nitric acid Nitric acid Nitrobenzene Oil Oleum Olive oil Oxalic acid Ozone Paraffin oil Perchloric acid Perchloric acid Phenol Phosphoric acid

Fluorvtesyra Svavelvte Blck Jod i alkohol Jod i kalium Mjlksyra Blyacetat Maleinsyra Kvicksilver Metanol Metylklorid Metyletylketon Mjlk Mineralolja Motorolja Nafta Salpetersyra Salpetersyra Nitrobensen Olja Oleum Olivolja Oxalsyra Ozon Paraffinolja Perklorsyra Perklorsyra Fenol Fosforsyra

Fluorwasserstoffsure Schwefelwasserstoff Tinte Jod in Alkohol Jod in Kalium Milchsure Bleiacetat Maleinsure Quecksilber Methanol Methylchlorid Methylethylketon Milch Minerall Motorenl Naphtha Salpetersure Salpetersure Nitrobenzol l Oleum Olivenl Oxalsure Ozon Paraffinl Perchlorsure Perchlorsure Phenol Phosphorsure

2001-07-17

kemres09.xls

Page 3 (4)

Bengt Johansson/TUF

Chemical resistance of Wirsbo-PEX


The information in this table is based upon ISO/TR 10358:1993 and Borealis ART 254 1994 06, and should be considered as a general guideline only. For the best evaluation of each case, please contact Wirsbo with a specification of the fluids in contact with the pipe, the temperature, the pressure, and the environment for the installation. No guarantee of whatever kind can be given in respect of the information in this list. The data shown is based upon information available at the time of printing,but may be revised from time to time in the light of subsequent research and experience. Symbols used to describe the resistance: S: Satisfactory resistance L: Limited resistance NS: Not Satisfactory resistance Note: The resistance refers to pressureless applications only

the chemicals: con: concentrated sol: aqueous solution > 10%, but not saturated ss: saturated aq. solution, prepared at 20 C tg-g: technical grade - gas tg-l: technical grade - liquid wf: water free ws: working solution of the conc. usually used in the industry concerned

Chemicals

Kemikalier

Chemikalien

Conc. Temperature (%) 20C 60C


50 20 tg-l tg-l ss 15 ss 75 98 sol ss 100 tg-l tg-l tg-l sol ws ss ss S S S S S S L S S L S S S L L L L NS S S S S S S S S L L S S L S L L S S NS NS NS NS NS S S S S S S

Phthalic acid Ftalsyra Potassium permanganateKaliumpermanganat Propionic acid Propionsyra Pyridine Pyridin Silicone oil Silikonolja Sodium hydroxide Natriumhydroxid Sodium hypochlorite Natriumhypoklorit Stearic acid Stearinsyra Sulphuric acid Svavelsyra Sulphuric acid Svavelsyra Tallow Talg Tannic acid Garvsyra Tartaric acid Vinsyra Tetrachloromethane Koltetraklorid Tetrahydrofuran Tetrahydrofuran Toluene Toluen Trichloroethylene Trikloreten Turpentine Terpentinolja Urea Urinmne Vaseline Vaselin Water Vatten Wein Vin Zinc chloride Zinkklorid Zinc nitrate Zinknitrat

Phthalsure Kaliumpermanganat Propionsure Pyridin Siliconl Natriumhydroxid Natriumhypochlorit Stearinsure Schwefelsure Schwefelsure Talg Gerbsure Weinsure Tetrachlormethan Tetrahydrofuran Toluol Trichlorethylen Terpentinl Harnstoff Vaselin Wasser Wein Zinkchlorid Zinknitrat

2001-07-17

kemres09.xls

Page 4 (4)

Vous aimerez peut-être aussi