Académique Documents
Professionnel Documents
Culture Documents
G LENDINNING
MARINE PRODUCTS, INC.
24 Diameter Minimum for #2/3 cable 28 Diameter Minimum for #2/4 cable
NOTE: Cable storage size specifications depends on the type of shore power cable used. 32 Minimum for 100 of #2/3 cable 38 Minimum for 100 of #2/4 cable
SEO or STO cable is stiff and will require at least this cable storage area.
STOW-A cable is flexible and does not require as much cable storage area as specified.
CM - 8 Rotator Assembly
1-1/4 clearance required at each Hand Knob from bottom of base 11 10
5-1/4
14 5-1/4
5-1/4
28
13 Radius from center of plate. This area required on both sides of base for plate to rotate 180 degrees
Center of Plate is where shore cable will drop into the container
Gold Anodize
Weight: 24 lbs.
180 degrees can be adjusted to any angle according to your requirements Hawse Pipe Assembly 6 PVC Pipe
SIDE VIEW approx. 24 Beam tested at 22 feet Hatch / Pipe Assembly (2 required) 6 PVC Pipe
42 Minimum
NOTE: Hawse Pipe accepts a standard Pin and Sleeve type shore side connector Exterior of Hawse Pipe may be painted (by the installer) to suite your color preference Hawse Pipe Cap has a neoprene gasket to assure a watertight seal 12-7/8 1-3/4 1-1/2 5 3 1-1/2
CM - 8 Hawse Pipe
1/4 14
6 7
CM - 8 Cablemaster
8-1/4
13 5-1/2
DRIVING PULLEY
13
1-3/4
WEIGHT: CM8 Hawse Pipe CM8 Power Unit MATERIAL: 6061 Aluminum FINISH: Gold Anodize
3 12 lbs. 40 lbs.
25