Vous êtes sur la page 1sur 3

From: Syed Hassan Abbas Hussain/Technical/VAS Sent: Thursday, June 30, 2011 8:00 PM To: Haider Ali/Technical/VAS OPS;

Farhan Haider/Technical/VAS OPS; Muhammad Rahe el Mukhtar/Technical/VAS OPS; Saad Chaudhry/Technical/VAS Cc: VAS Ops; Shahzad Ather Hussain/Technical/VAS; Changez Khan/Technical/NSS OPS ; Danish Ali/Technical VAS OPS Subject: RE: Loading psa.pc and psa.pc.SA_SSG

Dear Team

Please defer the pc file loading for tonight.

The next date for loading will be communicated later.

-Regards Syed Hassan Abbas Hussain VAS OPS +923333800064

From: Haider Ali/Technical/VAS OPS Sent: Thursday, June 30, 2011 4:09 PM To: Farhan Haider/Technical/VAS OPS; Muhammad Raheel Mukhtar/Technical/VAS OPS; Saad Chaudhry/Technical/VAS Cc: VAS Ops; Shahzad Ather Hussain/Technical/VAS; Changez Khan/Technical/NSS OPS ; Danish Ali/Technical VAS OPS Subject: Loading psa.pc and psa.pc.SA_SSG

Dear Farhan/Raheel/saad,

As per planning directive we have modified the files psa.pc and psa.pc.SA_SSG. T he modified files names are as follows: psa.pc-20110630 (placed at psa2a, psa3a, psa4b, psa5c and psa6c at /home /psaadmin/current/config/PSAConfig) And, psa.pc.SA_SSG-20110630 (placed at /home/psaadmin/current/config/PS AConfig/SSG at psa5e).

The proctab files for psa5e and psa5d are also modified and have been named proc

tab-20110630 and placed at /etc/aethos/config/

Following steps could be used for loading psa.pc file. Step1: Go to /home/psaadmin/current/config/PSAConfig (on psa2a, psa3a, psa4b, ps a5c, psa6d) Step2: take backup of existing psa.pc file using naming convention psa.pc-backup -20110701 Step3: Rename psa.pc-20110630 to psa.pc Step4: Load the pc file using command PSAConfig -pl psa.pc

Modifying Proctab:

Step 1: go to PSA 5e at /etc/aethos/config Step 2: Take the back up of current proctab file Step3: rename the proctab-20110630 to proctab (placed at/etc/aethos/config/)

After loading the psa.pc file and modifying proctab, restart the KT4X tint, they will disappear. Now start the KT1X tints.

Now, you can use following steps to load the SSG pc file.

Step 1: Go to /home/psaadmin/current/config/PSAConfig/SSG on PSA5c Step 2: Take backup of existing psa.pc.SA_SSG using the naming convention psa.pc .SA_SSG-backup-20110701 Step 3: Rename psa.pc.SA_SSG-20110630 to psa.pc.SA_SSG Step 4: Run the script load.sh

After the Script execution now we have to activate new proctab

Step 1: go to PSA 5d at /etc/aethos/config Step 2: Take the back up of current proctab file Step 3: rename the proctab-20110630 to proctab

Now, restart the tint KT488, it will disappear. And then start the KT188 tint.

Note in case of any issues contact me.

Best Regards, Haider Ali VAS operations

Vous aimerez peut-être aussi