Académique Documents
Professionnel Documents
Culture Documents
May 2004
DIN EN 287-1
ICS 25.160.10
{
Supersedes August 1997 edition.
National foreword
This standard has been prepared by CEN/TC 121 Welding (Secretariat: Germany). The responsible German body involved in its preparation was the Normenausschuss Schweitechnik (Welding Standards Committee), Technical Committee Abnahmefestlegungen fr das Personal fr Schweien und verwandte Verfahren.
Normen-Download-Beuth-TV Sddeutschland Holding AG Verlag-KdNr.229818-LfNr.2534165001-2004-09-27 07:55
General
The aim of this standard is to ensure that the qualification testing of welders is performed under the same conditions and using the same types of test piece, irrespective of where such tests are held. By passing the test as specified here, a welder demonstrates that he is adequately qualified to be employed for the fusion welding of steel in industry within the scope specified in this standard. The standard thus provides a basis for mutual recognition of welder qualification test certificates by the bodies responsible for the various fields of application.
No part of this standard may be reproduced without the prior permission of DIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen).
08.04
9567598
Page 2 DIN EN 287-1 : 2004-05 g) h) i) or testing and inspection bodies accredited by federal or Land authorities; welding engineers, accredited on the basis of legal regulations, codes of practice or standards; examiners or examining bodies, accredited on the basis of European codes of practice, legal regulations standards, or in accordance with DIN EN ISO/IEC 17024.
Test certificates
This standard does not invalidate existing qualification test certificates issued on the basis of the 1997 edition of DIN EN 287-1. On the expiry of these certificates new certificates have to be issued, which may involve the welding of further test pieces by the welder concerned (since the scope of the new certificates differs somewhat from those issued hitherto on the basis of DIN EN 287-1).
National Annex NA
Standard referred to
(and not included in Normative references and Bibliography) DIN V 1738 Welding Guidelines for a grouping system of materials for welding purposes (ISO/TR 15608 : 2000)
Normen-Download-Beuth-TV Sddeutschland Holding AG Verlag-KdNr.229818-LfNr.2534165001-2004-09-27 07:55
EN 287-1
March 2004
ICS 25.160.10
English version
This European Standard was approved by CEN on 2004-01-02. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.
European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Management Centre: rue de Stassart 36, B-1050 Brussels
2004. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members.
5 5 5 6
35
35
34
31
27
26
25
24
24 24 24 24
24
23
13 13 13 17 18 18 23
7 7 7 8 8 9 9 10 11 12