Vous êtes sur la page 1sur 39

Shell UIE - HSE Conditions of Contract Type MAX Model Rev.

11 February 2010

Page 1 of 39

HSE CONDITIONS OF CONTRACT


TYPE MAX MODEL
Drafting Note: These HSE Conditions of Contract are to be used in conjunction with the UIE Minimum Requirements Matrix for HSE Conditions of Contract and Criteria for Selecting Type Model of HSE Conditions of Contract diagram both held in the UIE CP Livelink area. This Type Max Model is suitable for: Selecting appropriate articles, because it contains all HSE articles. Any alterations or additions to these articles are to be agreed with: Contractor HSE Management Team. Legal Counsel for part A. All drafting notes are for internal use only and shall be deleted before incorporation in ITT or contract!

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 2 of 39

CONTENT SECTION VI PART A GENERAL HSE CONDITIONS Article 1 Article 2 Article 3 Article 4 Article 5 Definitions HSE Standards HSE Management System Subcontractor Management Contract HSE Plan

SECTION VI PART B WORK SPECIFIC HSE CONDITIONS SECTION VI PART C SHELL U.K. LIMITED SPECIAL HSE CONDITIONS SECTION VI PART D A/S NORSKE SHELL SPECIAL HSE CONDITIONS SECTION VI PART E NEDERLANDSE AARDOLIE MAATSCHAPPIJ B.V. SPECIAL HSE CONDITIONS SECTION VI PART F SHELL E & P IRELAND LIMITED SPECIAL HSE CONDITIONS SECTION VI APPENDICES Appendix 1 Appendix 2 Appendix 3 Appendix 4 Appendix 5 Appendix 6 - Overview of HSE Standards, HSE Specifications and other HSE requirements - COMPANY UIE HSE Policy - COMPANY HSE Golden Rules - COMPANY Life Saving Rules - Monthly Reporting Contractor HSE Statistics - Contractor Emergency Contacts Details List

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 3 of 39

SECTION VI PART A GENERAL HSE CONDITIONS OF CONTRACT


ARTICLE 1 - DEFINITIONS
Drafting Note: Verify this Article to avoid duplication and potential conflicts and delete here any definitions, which are already provided in the Section II of the Contract. A.1.1 The following definitions shall be used for the purpose of interpreting this section of the CONTRACT: ALARP (As Low As Reasonable Practicable) shall mean such level of reduction of risk where cost and effort of further reduction measures becomes grossly disproportionate to the additional risk reduction obtained. BAT (Best Available Techniques) shall mean the most effective and advanced stage in the development of activities and their methods of operation which indicate the practical suitability of particular techniques for providing in principle the basis for emission limit values designed to prevent and, where that is not practicable, generally to reduce emissions and the impact on the environment. PERSONNEL shall mean workers referred to in European safety and health protection Directives and national legislation of CONTRACTOR and / or SUBCONTRACTOR as is necessary for the performance of the WORK in accordance with the CONTRACT and any other personnel under the direct or indirect control of CONTRACTOR and/or SUBCONTRACTOR, in relation to its performance under the CONTRACT. HSE HAZARD shall mean an object, physical effect or condition able to harm people, property or environment. HSE STANDARD(S) shall mean, as referred to individually or collectively, HSE policies, standards, procedures and requirements applicable to the performance of the WORK under the CONTRACT. SUBCONTRACTOR shall mean any subcontractor, agency or supplier of the CONTRACTOR of any tier. COMPANY WORKSITE shall mean the whole area of any COMPANY premises, sites, locations or installations, including temporary accommodations and COMPANY provided transportation. CONTRACT HSE PLAN shall mean the plan as specified in Article 5 specific for and covering all WORK to be performed under the CONTRACT. Such plan may be presented under various titles (e.g. Project HSE Plan, Contractor QHSE Plan), it may form part of other plans (e.g. Contract Execution Plan, Project Execution Plan), it may consist of a set of plans (e.g. HSE Improvement Plan, Safety Plan, Contract Environmental Plan, HSE Programme, Health & Safety Activity Plan, HSE Assurance Plan), provided it complies with the requirements as stated under Article 5.

ARTICLE 2 HSE STANDARDS


A.2.1 All PERSONNEL engaged in the WORK shall be conversant with and, at all times, comply with the HSE STANDARDS. HSE STANDARDS shall include COMPANY HSE STANDARDS as specified in this section of the CONTRACT, including Appendix 1.

A.2.2

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 4 of 39

A.2.3

CONTRACTOR shall have implemented a system to control changes to HSE STANDARDS. CONTRACTOR shall ensure that PERSONNEL are informed about the effect of such changes to their work. Where any part of the WORK is not covered by any of the HSE STANDARDS, or when the defined HSE STANDARDS are considered or found to be inadequate, CONTRACTOR shall immediately notify COMPANY of such absence or inadequacy. COMPANY and CONTRACTOR shall then jointly develop and agree on additional or revised HSE STANDARDS to convert and reduce the risk of the relevant part of the WORK to ALARP and use BAT, if applicable. COMPANY and CONTRACTOR shall jointly agree on the distribution of additional cost resulting from implementation of such additional HSE STANDARDS, subject to article headed Variations to Section II General Conditions of Agreement. CONTRACTOR shall adhere to any HSE STANDARD prescribed by COMPANY. Any written notice by COMPANY to (re)align with those HSE STANDARDS shall be acted up on by the date specified in that notice.

A.2.4

A.2.5

HSE Golden Rules and Life Saving Rules A.2.6 All PERSONNEL shall be familiar with and work according to COMPANYs HSE Golden Rules and Life Saving Rules, attached herein. In case PERSONNEL is visiting or working on a COMPANY WORKSITE, then they shall be familiar with and work according to COMPANYs Life Saving Rules, as attached herein. CONTRACTOR shall ensure that all PERSONNEL engaged in the WORK, including subcontractors, have been informed about the Life Saving Rules and the consequences of not following these.

A.2.7

A.2.8

Substance (Ab)use A.2.9 CONTRACTOR shall ensure, as far as reasonably practical, that all PERSONNEL do not at any time partake of, be under the influence of, and do not transport to or have in their possession on or at COMPANY WORKSITES any medication, drugs, alcohol, natural stimulants, natural sedatives or other similar intoxicating substances, other than for bona fide medical reasons.

A.2.10 CONTRACTOR shall ensure that all PERSONNEL comply with national guidelines for the transportation of medicines offshore. A.2.11 All PERSONNEL shall inform COMPANY REPRESENTATIVE of any concerns they have around their ability to perform their task safely whether due to illness, injury, medication or adverse effect of medication. PERSONNEL shall not be in possession of more than the required amount of medication to meet the prescribed dosage. CONTRACTOR shall ensure that all PERSONNEL are aware of this requirement. A.2.12 Any PERSONNEL found contravening article A.2.9 and/or A.2.10 will not be allowed access to or will be removed from COMPANY WORKSITE with immediate effect and COMPANY shall not be liable for any charges or consequences arising directly or indirectly out of such removal. COMPANY reserves the right to remove any PERSONNEL from COMPANY WORKSITE where article A.2.9 and A.2.10 are complied with but the medication and/or effects are such that for the safety of the person taking the medication and/or others at the location removal is necessary. Legislation

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 5 of 39

A.2.13 CONTRACTOR shall, as a minimum, comply with all HSE requirements imposed by national legislation. A.2.14 CONTRACTOR shall report immediately to COMPANY: Any enforcement action taken against CONTRACTOR; Any complaint filed under HSE legislation against CONTRACTOR while performing the WORK.

ARTICLE 3 HSE MANAGEMENT SYSTEM


HSE Policy A.3.1 CONTRACTOR shall have a Health, Safety and Environment (HSE) policy, which is: Documented and visibly endorsed by top management; Of a standard comparable to COMPANYs policy attached in Appendix 2; Known by and available to all PERSONNEL; Implemented and maintained at all levels in CONTRACTORs organisation.

Target and Objective setting A.3.2 CONTRACTOR's HSE goal shall be "Goal Zero" to reflect CONTRACTOR's commitment to an accident free workplace. CONTRACTORs targets and objectives shall be focused on leading indicators and pro-active efforts to reduce the likelihood and severity of incidents.

A.3.3

HSE Management System A.3.4 CONTRACTOR shall have a fully documented and effectively implemented HSE Management System. The scope of CONTRACTORs HSE Management System shall cover all areas of the WORK, including WORK to be performed by any SUBCONTRACTOR and all interfaces with COMPANY and SUBCONTRACTORs. CONTRACTORs HSE Management System may be subject to review by COMPANY prior to mobilization for the WORK and until completion of the WORK to a frequency agreed by COMPANY. In the event CONTRACTORs HSE Management System is certified it shall remain certified for the duration of the contract. If the certificate is suspended, withdrawn or lapsed in any other way, CONTRACTOR shall immediately inform COMPANY.

A.3.5

A.3.6

A.3.7

HSE Management System Interfacing A.3.8 CONTRACTOR shall, where relevant, identify and control interfaces between HSE Management Systems of CONTRACTOR, COMPANY and other interfacing parties HSE interfaces, consistent with Step Change In Safety - Health and Safety Management Interfacing Guidance (2003). CONTRACTOR shall participate in a documented HSE interfacing process, consistent with Step Change In Safety - Health and Safety Management Interfacing Guidance (2003), to identify and control the interfaces between HSE Management Systems of CONTRACTOR, COMPANY and other interfacing parties. CONTRACTOR shall implement agreed arrangements and verify these are up-todate throughout the WORK.

A.3.9

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 6 of 39

A.3.10 Where applicable, CONTRACTOR shall conduct an HSE interfacing process with SUBCONTRACTORs consistent to that set out in article A.3.9. The CONTRACTOR / SUBCONTRACTOR interface documents shall be made available to COMPANY for review on request. A.3.11 The agreed outcome of the HSE interfacing process in article A.3.9 shall be documented jointly by COMPANY and CONTRACTOR in the Contract HSE Management System (MS) Interface Document. A.3.12 Contract HSE MS Interface Document shall be developed and agreed by COMPANY and CONTRACTOR prior to the commencement of mobilisation and/or physical work commences. A.3.13 Throughout the duration of the WORK, the Contract HSE MS Interface Document shall be reviewed and updated at a frequency agreed by COMPANY and CONTRACTOR and in the event there is a significant intermediate change, which may affect interface arrangements, e.g. audit or incident investigation. HSE Risk Management A.3.14 CONTRACTOR shall employ best practice methods and meet all legal requirements in identifying, assessing and controlling HSE HAZARDs. These methods and the outcome shall be documented. A.3.15 CONTRACTOR shall reduce HSE HAZARDS to a level, which is ALARP and use BAT, if applicable. CONTRACTOR shall submit, upon COMPANY request, its risk acceptance criteria for COMPANY review. Environmental Management A.3.16 CONTRACTOR shall comply with COMPANYs Global Environmental Standards (EP2005-0161) as referred to in Appendix 1, as relevant to the WORK. A.3.17 CONTRACTORs environmental management system shall follow the principles of the ISO 14001 standard. A.3.18 CONTRACTOR shall specify in the CONTRACT HSE PLAN (ref. Article 5), or separate Contract Environmental Plan, measures applied to avoid harm to the environment by minimizing climate impact, energy consumption, health- and environmentally dangerous chemicals, waste, resources, packing materials (e.g. by using used or recycled materials). HSE Organisation A.3.19 CONTRACTOR HSE organisation shall provide fit-for-purpose HSE support to plan, execute and monitor the WORK. Competence and Training A.3.20 CONTRACTOR shall ensure that PERSONNEL are competent, capable and qualified to a level that allows them to work without creating unnecessary risk for themselves and others. A.3.21 CONTRACTOR shall ensure that all PERSONNEL have and maintain the necessary HSE competencies to perform the WORK to the HSE STANDARDS. A.3.22 CONTRACTOR shall ensure that all supervisory PERSONNEL have formal training in: Supervision; HSE;

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 7 of 39

Intervention.

A.3.23 CONTRACTOR shall have implemented a system that assures competence of PERSONNEL. CONTRACTOR shall provide information about the system upon COMPANY request. A.3.24 For those roles where no suitable recognised competence standards exist, CONTRACTOR shall provide, upon COMPANY request, information on the selection criteria and/or method used to provide assurance of individual competence. A.3.25 CONTRACTOR shall establish and agree with COMPANY a CONTRACTOR Key Personnel List of PERSONNEL taking HSE critical roles. The list shall identify key CONTRACTOR individuals by name and by (key) role. A.3.26 For every role on this CONTRACTOR Key Personnel List, CONTRACTOR shall define minimum requirements for HSE competences and qualifications relevant to the WORK. CONTRACTOR shall identify the extent of compliance with these requirements. CONTRACTOR shall maintain the list and provide to COMPANY upon request. A.3.27 CONTRACTOR shall minimize turn-over of PERSONNEL, where possible, to ensure established competence levels and to minimise role discontinuity. CONTRACTOR shall obtain COMPANYs written approval prior to replacing any PERSONNEL listed on the CONTRACTOR Key Personnel List. A.3.28 CONTRACTOR shall have implemented a system that records the training of PERSONNEL. CONTRACTOR shall keep training records up-to-date. CONTRACTOR shall furnish information about the system and/or records of training upon request by COMPANY. A.3.29 Unless otherwise agreed with COMPANY in writing, all training of PERSONNEL shall be at CONTRACTORs cost. Behavioural Safety A.3.30 CONTRACTOR shall have in place a Behavioural Based Programme. A.3.31 CONTRACTOR shall demonstrate senior management commitment by conducting regular visits to the relevant worksites and by attending Behavioural Based Training. A.3.32 CONTRACTOR shall actively train and encourage PERSONNEL to intervene on unsafe behaviours and situations and report on deviations from procedures, plans and expectations. Note that PERSONNEL include SUBCONTRACTOR personnel. Occupational Health Management and Working Environment A.3.33 CONTRACTOR shall comply with COMPANYs Health Management Standards as referred to in Appendix 1, as relevant to the WORK. Medical Fitness / Fitness to Work A.3.34 CONTRACTOR shall ensure that all PERSONNEL engaged in the WORK are medically fit for the job to be undertaken. A.3.35 CONTRACTOR shall be able to demonstrate that PERSONNEL, selected for positions for which Fitness to Work medical evaluation is required, follow the guidance as laid down in COMPANYs Protocols and Guidance Notes of Fitness to Work.

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 8 of 39

A.3.36 If in the opinion of COMPANY, any PERSONNEL are not medically fit to travel or work offshore, then COMPANY reserves the right to: refuse permission for that PERSONNEL to travel offshore; or return that PERSONNEL from offshore. Working Times A.3.37 CONTRACTOR shall implement a policy and arrangements for working time in accordance with the national legislation. Mobilisation / Start-up of the Work A.3.38 Prior to mobilization and starting any part of the WORK, CONTRACTOR shall provide a written confirmation, stating that both CONTRACTOR and SUBCONTRACTORs fulfil the requirements of the CONTRACT. A.3.39 CONTRACTOR shall, prior to commencement of the WORK, inform all PERSONNEL about all (legislative, COMPANY, CONTRACTOR) HSE regulations, rules, requirements, instructions, information, which are or could be related to the WORK. Such regulations, rules, requirements, instructions and information may be subject to review by COMPANY. CONTRACTOR shall communicate these in such a manner that all PERSONNEL can easily understand it. CONTRACTOR shall ensure that any new PERSONNEL are informed in an equal manner. A.3.40 Before commencement of the WORK CONTRACTOR shall ensure all PERSONNEL involved in the WORK receive a Mobilisation Briefing detailing COMPANY expectations in performance of the WORK and risks associated with WORK. CONTRACTOR shall ensure that any new PERSONNEL are informed in an equal manner. HSE Communications and Meetings A.3.41 CONTRACTOR shall ensure efficient and effective HSE communication and consultation with all PERSONNEL involved in the WORK. This includes but is not limited to toolbox meetings prior to the start of the WORK, worksite HSE meetings on a regular basis with all parties involved (including SUBCONTRACTORs, COMPANY and third parties), newsletters, etc. A.3.42 CONTRACTOR shall participate in relevant COMPANY HSE meetings. HSE Performance Reporting A.3.43 CONTRACTOR shall submit on a monthly, or at least quarterly, basis an HSE Performance Report to COMPANY Representative. This report shall contain as a minimum the following data, as related to the WORK: Progress against implementation of the CONTRACT HSE PLAN. A list, including a brief description, of all incidents (including near misses and potential incidents); Exposure hours (including SUBCONTRACTOR exposure hours), broken-down per worksite/location; Number of Fatalities (FAT); Number of Permanent Total Disabilities (PTD); Number of Lost Workday Cases (LWC); Number of Restricted Workday Cases (RWC); Number of Medical Treatment Cases (MTC); Number of First Aid Cases (FAC); Number of Environmental Non-conformances; Number of Environmental Spills; Leading performance indicators as agreed with COMPANY;

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 9 of 39

Additional contract specific HSE performance data, as to be agreed with COMPANY.

And, in case required by COMPANY and/or regulatory requirements: Mileage / kilometres driven for the WORK; Fuel / gas consumption; Electricity consumption; Water usage (public facilities / surface water / ground water); Water discharge; Waste generated. The format, content and the frequency of the HSE Performance Report shall be agreed with COMPANY prior to the commencement of the WORK. However, HSE statistics shall be reported using the form attached in Appendix 5. A.3.44 CONTRACTOR shall submit on a monthly, or at least quarterly, basis an HSE Performance Report to COMPANY Representative. This report shall contain as a minimum the following data, as related to the WORK: A list, including a brief description, of all incidents (including near misses and potential incidents); Exposure hours (including SUBCONTRACTOR exposure hours), broken-down per worksite/location; Number of Fatalities (FAT); Number of Permanent Total Disabilities (PTD); Number of Lost Workday Cases (LWC); Number of Restricted Workday Cases (RWC); Number of Medical Treatment Cases (MTC); Number of Environmental Non-conformances; Number of Environmental Spills; Additional contract specific HSE performance data, as to be agreed with COMPANY. The format, content and the frequency of the HSE Performance Report shall be agreed with COMPANY prior to the commencement of the WORK. However, HSE statistics shall be reported using the form attached in Appendix 5. A.3.45 In the event that CONTRACTOR receives an amber or red stoplight banding from COMPANY on HSE performance, then CONTRACTOR shall prepare and implement an HSE Improvement Plan to rectify such. Reference is made to Stoplight Reporting requirements listed in Appendix 1. A.3.46 CONTRACTOR shall submit an Annual HSE Performance Report by the 15th of January of the following year. A.3.47 CONTRACTOR shall submit an HSE Performance Close-out Report at the end of the CONTRACT period. A.3.48 Both the Annual HSE Performance Report and the HSE Performance Close-out Report, as mentioned in article A.3.46 and A.3.47, shall as a minimum address the following: All data as mentioned in article A.3.43/A.3.44 consolidated for the entire contract period; List of all incidents (including near misses and potential incidents); Summary of underlying causes of and follow-up to incidents with significant actual consequences; HSE successes that should be considered for next year or future work; Problems experienced and actions taken to resolve these; Effectiveness of CONTRACT HSE PLAN implementation; Effectiveness of HSE interfacing process;

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 10 of 39

SUBCONTRACTOR performance evaluation; Any other lessons to be learnt and suggestions for improvements.

HSE Incident Management A.3.49 CONTRACTOR shall have a structured and documented HSE incident notification, investigation and reporting system. A.3.50 CONTRACTOR shall report any HSE incident and/or accident, related to CONTRACTOR activities or PERSONNEL, to national or local authorities as required by relevant legislation. A.3.51 CONTRACTOR shall notify COMPANY REPRESENTATIVE immediately of any HSE incident, including near misses and significant potential incidents, arising from CONTRACTORs or SUBCONTRACTORs activities associated with the WORK, related to: Harm to COMPANY, CONTRACTOR and SUBCONTRACTOR PERSONNEL or Third Party, Harm to the environment, Damage to, or loss of, COMPANY, CONTRACTOR, SUBCONTRACTOR or Third Party assets. Harm to COMPANY reputation. A.3.52 CONTRACTOR shall submit incident notifications to COMPANY per COMPANY requirements listed in Appendix 1. A.3.53 CONTRACTOR shall co-operate fully with COMPANY and participate as necessary in any COMPANY investigation of HSE incidents. A.3.54 CONTRACTOR shall investigate any incident as described in article A.3.51. A.3.55 COMPANY shall have the right to participate in any such investigation (or in certain circumstances to initiate its own investigation) of these incidents, wherever they occur, and shall have unrestricted access at all reasonable times to the facilities, equipment, materials, records and PERSONNEL of CONTRACTOR and SUBCONTRACTOR(s) for this purpose (subject only to any statutory or contractual obligation prohibiting the disclosure of any such records by CONTRACTOR). A.3.56 CONTRACTOR shall include in all SUBCONTRACTs, associated with the WORK, rights of access for COMPANY with respect to incident investigation, as described herein. A.3.57 Nothing in above articles shall restrain CONTRACTOR from investigating incidents related to CONTRACTOR activities or PERSONNEL and, in such cases, CONTRACTOR shall provide a copy of their completed incident report to COMPANY on request (subject only to any statutory or contractual obligation prohibiting the disclosure of any such records by CONTRACTOR). A.3.58 CONTRACTOR shall present incident investigation results to COMPANY, in case required by COMPANY. A.3.59 CONTRACTOR shall implement the recommendations arising from incident investigations and shall ensure that findings are fully communicated to all relevant PERSONNEL. Emergency Preparedness and Response A.3.60 CONTRACTOR shall maintain fit-for-purpose Emergency Response Capability, which shall be clearly documented.

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 11 of 39

A.3.61 In cases required by COMPANY, CONTRACTOR shall develop, in collaboration with COMPANY, an Emergency Bridging Document. Such Emergency Bridging Document shall be implemented, and PERSONNEL shall be briefed on the content, prior to start of the WORK. A.3.62 Where applicable, CONTRACTOR shall provide fit-for-purpose survival equipment, first-aid equipment, life-saving equipment, fire-fighting equipment and oil/chemical spill equipment. CONTRACTOR shall ensure that involved PERSONNEL are trained and competent in its use. A.3.63 CONTRACTOR shall develop and maintain a programme of training and exercises to ensure competency of all individuals and teams involved in the emergency response organisation, in accordance with national and COMPANY requirements. A.3.64 CONTRACTOR shall ensure that all PERSONNEL are aware of COMPANYs emergency procedures. CONTRACTOR shall instruct all PERSONNEL to comply with COMPANYs instructions during emergencies. A.3.65 COMPANY shall brief PERSONNEL on their roles and responsibilities in emergency situations. A.3.66 PERSONNEL working offshore shall have completed basic HSE and emergency preparedness and response training, including HUET (Helicopter Underwater Escape Training), in accordance with requirements of the industry standards in the country of operation. A.3.67 Basic emergency preparedness and response training will be at CONTRACTORs cost. A.3.68 CONTRACTOR shall make available PERSONNEL to participate in periodic drills, instructions in first-aid, survival, life-saving and fire-fighting as may be requested and conducted from time to time by COMPANY. A.3.69 COMPANY reserves the right to nominate PERSONNEL to positions within the (local) emergency response organisation. In case this requires specific training such will be at COMPANYs cost. A.3.70 Participation of CONTRACTOR in large scale Emergency Response exercises, as requested by COMPANY, will be at COMPANYs cost. Compensation mechanism to be agreed with COMPANY prior to such exercises. A.3.71 In case the scope of the CONTRACT requires PERSONNEL to perform work at or close to COMPANY WORKSITE, then CONTRACTOR shall, before start of the WORK, provide COMPANY with a Contractor Emergency Contact Details list (Appendix 6). Such list shall contain CONTRACTORs emergency telephone numbers that are available 24 hours per day, 7 day per week. CONTRACTOR shall inform COMPANY immediately of any changes to this Contractor Emergency Contact Details list. HSE Audits, Reviews and Inspections A.3.72 CONTRACTOR shall perform audits, reviews and inspections on the worksite as required by CONTRACTORs HSE Management System or by COMPANY. A.3.73 During these audits, reviews and inspections CONTRACTOR shall verify that CONTRACTOR has fulfilled any and all legal obligations, including conditions and stipulations in all relevant licenses, consents and permits and that the WORK is performed in accordance with HSE STANDARDS.

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 12 of 39

A.3.74 CONTRACTOR shall provide capable, qualified and competent PERSONNEL to perform audits, reviews and inspections. A.3.75 Upon COMPANYs request, CONTRACTOR shall submit reports of audits, reviews and inspections to COMPANY. A.3.76 CONTRACTOR shall, upon COMPANY request, demonstrate implementation of findings from audits, reviews and inspections. effective

A.3.77 CONTRACTOR shall co-operate with any HSE audit, review or inspection carried out by COMPANY. COMPANY shall inform CONTRACTOR of the results. HSE Records A.3.78 CONTRACTOR shall retain relevant HSE records resulting from its WORK in line with relevant legislation. COMPANY shall be given access to these records on request.

ARTICLE 4 SUBCONTRACTOR MANAGEMENT


A.4.1 CONTRACTOR shall ensure that SUBCONTRACTORs comply with HSE STANDARDS, including Articles 1 to 5 of this section, including Appendices, as appropriate. CONTRACTOR shall include suitable equivalent articles in their SUBCONTRACTs to meet the requirements of article A.4.1 and an obligation to comply with the requirements of the CONTRACT. There shall be no more than two (2) layers of SUBCONTRACTs, unless formally agreed with COMPANY otherwise. CONTRACTOR shall inform COMPANY in advance in a reasonable time of portions of the WORK that CONTRACTOR intends to subcontract. CONTRACTOR shall use a fit-for-purpose process for identification, evaluation and selection of SUBCONTRACTORs consistent with OGP (The International Association of Oil & Gas Producers) Report no. 6.64/291 or an equivalent industrial or statutory system. COMPANY reserves the right to participate in the evaluation of HSE capability and approve any SUBCONTRACTOR accordingly. CONTRACTOR shall inform COMPANY in advance in a reasonable time of the details of any planned award of a SUBCONTRACT. This includes, but is not limited to subcontracted workscope, SUBCONTRACTOR company name and anticipated award date. CONTRACTOR shall provide to SUBCONTRACTOR, as a minimum, in a format and level that will be readily understood by SUBCONTRACTOR: specific HSE HAZARDS as relevant to SUBCONTRACTORs WORK; HSE STANDARDS as relevant to SUBCONTRACTORs WORK; CONTRACT HSE PLAN. CONTRACTOR shall ensure that SUBCONTRACTOR familiarises itself with the information as provided under article A.4.8 and with its role in implementing the CONTRACT HSE PLAN.

A.4.2

A.4.3

A.4.4

A.4.5

A.4.6

A.4.7

A.4.8

A.4.9

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 13 of 39

A.4.10 CONTRACTOR shall maintain an overview of SUBCONTACTORS, showing activities to be performed and risk level relevant to the WORK. CONTRACTOR shall provide this overview to COMPANY upon request. A.4.11 CONTRACTOR shall ensure that all SUBCONTRACTOR PERSONNEL are competent, capable and qualified as per the provisions contained in Article 3. A.4.12 CONTRACTOR shall be accountable for SUBCONTRACTOR HSE performance. A.4.13 COMPANY reserves the right to refuse SUBCONTRACTOR access to COMPANY WORKSITE and to re-allocate work following non-compliance to HSE STANDARDS. A.4.14 CONTRACTOR shall provide evaluation of SUBCONTRACTORs HSE performance upon completion of the work.

ARTICLE 5 CONTRACT HSE PLAN


A.5.1 CONTRACTOR shall prepare and submit for COMPANY review a CONTRACT HSE PLAN, which covers all WORK under the CONTRACT and, if appropriate, relevant parts of the COMPANY HSE Plan. This CONTRACT HSE PLAN shall be reviewed and accepted by COMPANY prior to the commencement of mobilisation and/or any physical work commences. Format of CONTRACT HSE PLAN shall be to a standard agreed by COMPANY. CONTRACT HSE PLAN shall include as a minimum: Relevant requirements as resulting from HSE STANDARDS; CONTRACTORs (annual) targets for HSE performance. These shall be aligned with COMPANYs targets for HSE performance; HSE HAZARDS associated with the WORK; CONTRACTOR Organisation chart, outlining (HSE) roles and responsibilities related to the WORK; CONTRACTORs proposed application of HSE systems, programmes and other HSE activities to mitigate risks associated with the WORK; CONTRACTORs activities to rectify and continuously improve HSE performance; CONTRACTORs HSE assurance plan including: o HSE audit, inspection, and review schedule (ref. article A.3.72); o HSE meeting, worksite visit and engagement schedule during mobilisation, execution of the WORK and demobilisation. CONTRACTOR shall review CONTRACT HSE PLAN on a regular basis and prior to any phase or part of the work where new HSE HAZARDS are identified. Such review shall be conducted at least every year, preferably before January of the next calendar year to ensure alignment with COMPANY and CONTRACTOR annual corporate HSE plans. Any proposed revision to the CONTRACT HSE PLAN, shall be submitted to COMPANY for review and comment prior to implementation. CONTRACTOR shall implement CONTRACT HSE PLAN and communicate its relevant parts, including subsequent revisions, to PERSONNEL. CONTRACTOR shall report performance and progress against CONTRACT HSE PLAN in accordance with the requirements contained in article A.3.43/A.3.44.

A.5.2

A.5.3

A.5.4

A.5.5

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 14 of 39

SECTION VI PART B WORK SPECIFIC HSE CONDITIONS


Drafting note: Leave out clauses that are not relevant to the scope of the contract (after consulting Contractor HSE Mgt team). Note that some articles shall be included only in case these are relevant. These are headed by: [Conditional article delete when not relevant] If in doubt contact Expertise Holder.

This section contains requirements that shall be read in conjunction to Section VI Part A. HSE Case(s) and statutory HSE Plans B.1 Notwithstanding Article 5, CONTRACTOR shall submit WORK specific HSE/Safety/Environmental Cases or other statutory HSE Plans relevant to the WORK or shall contribute to HSE/Safety/Environmental Cases or other statutory HSE Plans prepared by COMPANY. The risk assessment mentioned in article A.3.14 and A.3.15 shall be reflected therein.

HSE Organisation B.2 CONTRACTOR HSE organisation shall operate independent from line organisation and report directly to top level management of CONTRACTORs organisation.

Road Safety B.3 PERSONNEL shall execute any road transport associated with the WORK in accordance with COMPANYs EPE HSE Road Transport Standard (doc.no. EP20050261-ST-EPE). Note that PERSONNEL include SUBCONTRACTOR personnel.

Personal Protective Equipment (PPE) B.4 CONTRACTOR shall ensure that PERSONNEL are provided with sufficient and fitfor-purpose Personal Protective Equipment (PPE) and shall ensure that such is maintained in a good condition. CONTRACTOR ensures that PERSONNEL are trained to use PPE in a correct manner. CONTRACTOR shall comply with the PPE requirements as contained in COMPANYs Technical Standard regarding Personal Protective Equipment (doc.no. DEP.80.80.0016) or equivalent.

B.5

Hazardous Activities Specialised Training B.6 CONTRACTOR shall identify and document activities that require special or additional training in respect of potential risks associated with the WORK, such as but not limited to activities involving asbestos removal, exposure to chemicals, mercury, radiation, BTEX, high noise and vibration levels or other occupational health and safety hazards. CONTRACTOR shall ensure that PERSONNEL are trained accordingly.

Permit to Work B.7 CONTRACTOR shall use a Permit to Work system at site to control HSE risks.

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 15 of 39

B.8

If applicable PERSONNEL will follow the Permit to Work system applied by the COMPANY. PERSONNEL will obtain and adhere to a Permit to Work. PERSONNELs role may be applicant and/or holder of a Permit to Work. CONTRACTOR shall ensure that PERSONNEL are competent, capable and qualified to follow the Permit to Work system applied by COMPANY. CONTRACTOR may use its own Permit to Work system to control and supervise CONTRACTOR and SUBCONTRACTOR PERSONNEL as long as this system is not in conflict with COMPANYs Permit to Work system. CONTRACTOR shall obtain COMPANY approval for such situation.

B.9

B.10

Chemicals B.11 CONTRACTOR shall adhere to COMPANYs procedures with respect to the handling and use of chemicals as listed in Appendix 1. CONTRACTOR shall provide to COMPANY up-to-date information, on health, safety and environmental hazards posed by chemical products used in the work in line with COMPANYs procedure (doc.no. EPE.CHEMICALS.PR.10). CONTRACTOR shall send updates of MSDS information of chemicals in use directly to COMPANY Chemical Support Team through the email address ABE--EPEChemical-Approval-@shell.com. CONTRACTOR shall ensure that chemicals are approved for use on COMPANY WORKSITE prior to being supplied, stored and/or used. If CONTRACTOR manufactures or imports chemicals, CONTRACTOR shall comply with prevailing statutes as well as regulations and guidelines on evaluating and classifying chemicals (e.g. REACH). All substances supplied by CONTRACTOR shall have been pre-registered / registered in accordance with REACH legislation and any chemical application areas under the contract must be covered by the substance exposure scenarios in the REACH registration process. CONTRACTOR shall adhere to legislation and local permit requirements for the use and (potential) discharge of ALL chemicals.

B.12

B.13

B.14

B.15

B.16

Mercury B.17 CONTRACTOR shall assess the occupational risks associated with working at CONTRACTOR worksite with COMPANY provided potentially mercury contaminated materials and equipment. CONTRACTOR shall take measures to protect the safety and health of PERSONNEL. This includes prevention of occupational risks, provision of information and training, arranging necessary organisation and resources, including health surveillance if appropriate. CONTRACTOR shall inform all PERSONNEL at CONTRACTOR worksite who may be exposed by working with COMPANY provided potentially mercury contaminated materials and equipment. Such information shall as a minimum cover the assessed risks and the steps taken or to be taken towards protection. In case CONTRACTOR subcontracts (part of the) WORK, involving COMPANY provided potentially mercury contaminated materials and equipment, then CONTRACTOR shall ensure that SUBCONTRACTOR shall take measures to protect health of PERSONNEL. At COMPANY WORKSITE the COMPANY procedures and instructions will apply. Waste Management

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 16 of 39

B.18

CONTRACTOR shall handle all waste in accordance with applicable national laws and regulations. CONTRACTOR shall handle all waste produced on COMPANY WORKSITE, in accordance with: COMPANY Waste Management Standard (doc.no. EPE.WASTE.ST.01 / EP200506207830). COMPANY Waste Management Policy (doc.no. EPE.WASTE.PO.01 / P200411203337). CONTRACTOR shall minimise the total quantity, and environmental impact of any waste resulting from execution of the WORK. CONTRACTOR shall identify any waste at the planning stage of any WORK. Any opportunities for the reduction of waste, or minimisation of the environmental impact of the waste, shall be identified at this stage. CONTRACTOR shall handle waste they generate on COMPANY premises, sites or installations, in accordance with the COMPANY site procedures and using COMPANY appointed waste contractors and agreements. CONTRACTOR is responsible for the safe containment and identification of any waste they produce, and to hand-over the waste to COMPANY representative for offsite disposal.

B.19

B.20

B.21

B.22

Rope Access B.23 In case WORK includes rope access, CONTRACTOR shall ensure this is performed by a company that is IRATA (Industrial Rope Access Trade Association) certified. In case IRATA certified company cannot be used (e.g. due national codes & standards), then contractor shall provide unambiguous evidence that proposed alternative company works according to a code of practice which satisfies the minimum requirement as prescribed in IRATA certification scheme code of practice.

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 17 of 39

SECTION VI PART C SHELL U.K. LIMITED SPECIAL HSE CONDITIONS


Drafting note: Include the following local country specific clauses as appropriate the intended geographical coverage of the contract. If in doubt contact your local HSE Contractor Mgt Specialist. Note that some articles shall be included only in case these are relevant. These are headed by: [Conditional article delete when not relevant] Leave out clauses that are not relevant to the scope of the contract (after consulting your local HSE Contractor Mgt Specialist and/or relevant Expertise Holder).

This section contains requirements that are applicable for the United Kingdom area and shall be read in conjunction with Section VI Part A and Part B.

GENERAL
Environmental Management C.1 CONTRACTOR shall evaluate and follow-up any environmental impact as result of the WORK. The follow-up shall include environmental monitoring where required. CONTRACTOR shall use results systematically to minimise environmental impact. CONTRACTOR shall include environmental aspects in all technical evaluations that involve discharges to sea and emissions to air. Evaluations of alternative technical solutions, processes and equipment shall include chemicals, energy requirements, discharges and waste generation to sea, emissions to air. The evaluations shall serve as criteria when selecting solutions based on cost-benefit analysis. CONTRACTOR shall document all evaluations and shall submit these to COMPANY upon request. CONTRACTOR shall have substitution plans for chemicals in line with regulatory requirements. CONTRACTOR shall include environmental aspects in management documentation including operational procedures.

C.2

C.3

Competence and Training C.4 CONTRACTOR shall ensure that PERSONNEL have completed the introductory safety programme as per Minimum Industry Safety Training (MIST) requirements. CONTRACTOR shall ensure that key PERSONNEL have completed HSE and emergency response training as per SUKEP standard Staff Competence Standards (Surface Operations) 2007 (doc.no. EP.71.ST.78-008) and, via consultation with COMPANY, as per requirements of the relevant Environmental Case. CONTRACTOR shall keep adequate training records in compliance with relevant legislation. PERSONNEL shall be able to demonstrate compliance to the requirements of article C.4 and C.5.

C.5

C.6

Medical Fitness / Fitness to Work C.7 Examination of medical Fitness to Work of PERSONNEL working offshore, shall be conducted in accordance with OGP (The International Association of Oil & Gas Producers) "Medical Aspects of Fitness for Work Offshore - Guidance for Examining Physicians".

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 18 of 39

C.8

CONTRACTOR shall formally advise COMPANY of any known medical disability or condition of any PERSONNEL, which may adversely affect his/her own health or safety, or the health, or safety of others. CONTRACTOR shall hold current Medical Certificates of Fitness for all PERSONNEL who are required to work offshore for fifteen (15) days or more in any twelve (12) month period. On request, CONTRACTOR shall submit to COMPANY a list of the physicians used by CONTRACTOR for medical fitness assessments.

C.9

C.10

Emergency Preparedness and Response C.11 CONTRACTOR shall, when working in a ring-fenced area on COMPANY WORKSITE, be responsible for the provision of first aid and for carrying out other emergency response tasks. CONTRACTOR shall ensure that PERSONNEL are assigned, trained and qualified to perform these tasks.

WORK SPECIFIC
Chemicals C.12 CONTRACTOR shall comply with the COSHH regulations for all tasks employing the use of hazardous chemicals. CONTRACTOR supplying chemicals covered by the Offshore Chemical Regulations (OCR 2002) shall submit to COMPANY up-to-date CEFAS templates.

C.13

Radiation C.14 In case CONTRACTOR uses radioactive sources, which are not owned by COMPANY, then CONTRACTOR shall have a valid permit (Registration) as required under the Radioactive Substances Act. CONTRACTOR shall confirm to COMPANY in writing that all requirements, as defined in the Registration have been fulfilled. CONTRACTOR is not allowed to use any radioactive sources unless explicitly notified to the COMPANY Radiation Protection Supervisor in advance. CONTRACTOR who may work with Naturally Occurring Radioactive Material (NORM) at COMPANY WORKSITE shall have 'Local Rules' in place to meet the requirements of the Ionizing Radiation Regulations. CONTRACTOR shall ensure that a copy of their Registration, as referred to in article C.14, and 'Local Rules' are available on worksite at the start and for the duration of the work. CONTRACTOR shall assign a coordinator who acts as a day-to-day focal point for COMPANYs Radiation Protection Supervisors. CONTRACTOR shall assure that the work is also in accordance with COMPANY 'Local Rules'.

C.15

C.16

C.17

C.18

C.19

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 19 of 39

SECTION VI PART D A/S NORSKE SHELL SPECIAL HSE CONDITIONS


Drafting note: Include the following local country specific clauses as appropriate the intended geographical coverage of the contract. If in doubt contact your local HSE Contractor Mgt Specialist. Note that some articles shall be included only in case these are relevant. These are headed by: [Conditional article delete when not relevant] Leave out clauses that are not relevant to the scope of the contract (after consulting your local HSE Contractor Mgt Specialist and/or relevant Expertise Holder).

This section contains requirements that are applicable for Norway and shall be read in conjunction with Section VI Part A and Part B.

GENERAL
Principle Enterprise and Workforce Involvement D.1 CONTRACTOR shall act as Principle Enterprise as defined by the Norwegian Working Environment Act. CONTRACTOR shall have a safety delegate system (verneombudsordning) implemented (AMU). PERSONNEL shall elect representatives as Safety Delegates to participate in the Safety Service at worksite and in the Joint Safety Committee (KAMU).

D.2

D.3

HSE Management System D.4 COMPANY will assess CONTRACTORs HSE Management System using NORSOK Standard S-006 HSE Evaluation of Contractors.

Environmental Management D.5 CONTRACTOR shall evaluate and follow-up any environmental impact as result of the work. The follow-up shall include environmental monitoring where required. CONTRACTOR shall use results systematically to minimise environmental impact. CONTRACTOR shall include environmental aspects in all technical evaluations that involve discharges to sea and emissions to air. Evaluations of alternative technical solutions, processes and equipment shall include chemicals, energy requirements, discharges and waste generation to sea, emissions to air. The evaluations shall serve as criteria when selecting solutions based on cost-benefit analysis. CONTRACTOR shall document all evaluations and shall submit these to COMPANY upon request. CONTRACTOR shall have substitution plans for chemicals in line with regulatory requirements. CONTRACTOR shall include environmental aspects in management documentation including operational procedures.

D.6

D.7

Competence and Training D.8 CONTRACTOR shall ensure that PERSONNEL have completed HSE and emergency response training as per NSEP procedure Safety and emergency

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 20 of 39

preparedness training and health certificate health statement EP.17.PR.15 (offshore activity) and/or Instruction for Safety and Security on Nyhamna 37-1A-NSA05-00001 (onshore activity). D.9 CONTRACTOR shall keep adequate training records. PERSONNEL shall be able to demonstrate compliance to the requirements as stated in NSEP procedure EP.17.PR.15, where applicable.

Occupational Health Management and Working Environment D.10 CONTRACTOR shall have a system implemented for monitoring all physical, chemical, biological, ergonomic and psychosocial/organisational factors which could be a potentially detriment to health and performance. The system shall be linked to continuous systematic monitoring of exposure of PERSONNEL to these factors, and to actions reducing potential exposure incorporated in the CONTRACT HSE PLAN. CONTRACTOR shall evaluate all chemicals to be used during the WORK for their health risks during transport, use and disposal. Chemicals with lowest health risk shall be prioritised wherever this is technically and operationally feasible. All evaluations shall be documented and be available to COMPANY on request. CONTRACTOR shall prepare a plan for replacing chemicals.

D.11

Medical Fitness / Fitness to Work D.12 Examination of medical fitness to work of PERSONNEL working offshore, shall be conducted in accordance with Regulations concerning medical requirements for persons engaged in the petroleum activities. PERSONNEL working offshore shall hold a current Medical Certificate of Fitness. This certificate shall only be issued following a medical examination, which has been conducted in accordance with Norwegian regulations. Specific disciplines, e.g. crane drivers and personnel with smoke diving functions, shall have the specific health certificate referred to in the OLF Guidelines for Safety and Emergency Training (002).

D.13

D.14

HSE Incident Management D.15 Investigation, reporting and follow-up on incidents shall be carried out as per COMPANYs guideline EP.17.PR.12 Incident Management in NSEP (doc.no. EP200604227631).

Contract HSE Plan D.16 CONTRACT HSE PLAN shall mention Absence due to illess as a target. HSE Performance Report shall include figures about absence due to illness.

WORK SPECIFIC
Environmental Management D.17 In case the WORK involves activities where discharges/emissions are regulated in discharge/emission permits, then CONTRACTOR shall be ISO 14001 certified. In the event ISO 14001 certification is not in place, then CONTRACTOR shall, upon COMPANY request, submit an ISO 14001 implementation plan.

Green House Gasses

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 21 of 39

D.18

In case the WORK involves activities that are energy / CO2 intensive, then CONTRACTOR shall, upon COMPANY request, submit CONTRACTORs GHG/EE (Green House Gasses / Energy Efficiency) Management Plan.

Eco-efficient procurement D.19 COMPANY has a goal of conducting its purchases without harm to the environment. This impacts environmental efforts related to climate and energy, health and environmentally dangerous chemicals. Waste prevention and effective use of resources is part of this and we therefore require that packing is reduced to a minimum on our purchases and subsequently packing that is used can be reused or recycled. Information to be found on the GRIP (GReen In Practice) website: http://www.grip.no/default.htm.

Chemicals D.20 CONTRACTOR shall comply with COMPANYs Procedure Chemical Management NSEP (doc.no. EPE.CHEMICALS.PR.70). CONTRACTOR shall report any manufactured and/or imported chemicals to the Product Registry (Produktregisteret) and shall obtain any necessary approval prior to manufacturing and/or importing chemicals. CONTRACTOR shall submit a Material Safety Data Sheet in Norwegian language conforming to the REACH directive 1907/2006 when requesting permission to supply, store and/or use chemicals. CONTRACTOR shall comply with any discharge permit requirements related to use and discharge of chemicals and the guidelines for ecotoxicological testing issued by the Norwegian Pollution Control Authority (SFT). To ensure proper quality assurance of the ecotoxicological documentation, CONTRACTOR shall include HOCNF of the chemical in the CHEMS database prior to use. In case chemicals do not meet the Norwegian Pollution Authority (SFT) criteria, CONTRACTOR shall document the justification for use and CONTRACTOR shall prepare a plan for replacing the chemical. CONTRACTOR shall obtain COMPANYs approval for any chemicals to be discharged to the environment. CONTRACTOR can only use chemicals classified by SFT as red or black if it is specifically included in the discharge permit issued to the COMPANY.

D.21

D.22

D.23

D.24

D.25

Radiation D.26 In case the WORK may involve exposure to LSA or Radiation, then CONTRACTOR shall have implemented relevant regulatory requirements and shall, where applicable, follow COMPANYs procedures and work instructions.

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 22 of 39

SECTION VI PART E NEDERLANDSE AARDOLIE MAATSCHAPPIJ B.V. SPECIAL HSE CONDITIONS

Drafting note: Include the following local country specific clauses as appropriate the intended geographical coverage of the contract. If in doubt contact your local HSE Contractor Mgt Specialist. Note that some articles shall be included only in case these are relevant. These are headed by: [Conditional article delete when not relevant] Leave out clauses that are not relevant to the scope of the contract (after consulting your local HSE Contractor Mgt Specialist and/or relevant Expertise Holder).

This section contains requirements that are applicable for The Netherlands and shall be read in conjunction with Section VI Part A and Part B.

GENERAL
Life Saving Rules E.1 All PERSONNEL entering a COMPANY WORKSITE shall be able to demonstrate, by means of the Personal Safety Logbook (PSL), that they have been informed about the Life Saving Rules and that they have confirmed these have been understood.

Substance (Ab)use E.2 Any PERSONNEL found contravening articles A.2.9 and A.2.10 will be subject to Shell Nederland BBS Procedure Beheer van Alcohol en Drugs (Doc.no.05.00.1023)

HSE Management System E.3 CONTRACTORs HSE management system shall be VCA (*/**) certified, unless exempted as per NAM standard NSS 00-G-0-07.

Environmental Management E.4 CONTRACTORs environmental management system shall follow the principles of the ISO 14001 standard. ISO 14001 certification is required for those cases as specified in NAM standard NSS 00-G-0-07.

Competence and Training E.5 CONTRACTOR shall ensure that PERSONNEL have completed HSE and emergency response training as per NAM standard NSS 00-G-0-07 referring to the NAM HSE Training Matrix. CONTRACTOR shall keep adequate training records. PERSONNEL shall be able to demonstrate compliance to the requirements as stated in NAM standard NSS 00-G-007 and NAM HSE Training Matrix, where applicable. In addition and to the extent required, CONTRACTOR shall ensure that PERSONNEL have completed the training that is as prescribed in the NOGEPA

E.6

E.7

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 23 of 39

training manual, as relevant to the WORK. Such training shall be completed prior to commencement of the WORK. Occupational Management and Working Environment E.8 CONTRACTOR shall ensure that no PERSONNEL under the age of eighteen (18) years are employed on COMPANYs onshore and offshore mining installations.

Medical Fitness / Fitness to Work E.9 Examination of medical Fitness to Work of PERSONNEL working offshore, shall be conducted in accordance with NOGEPAs Guidelines for Medical Aspects of Fitness for Offshore Work and COMPANYs Protocols and Guidance Notes of Fitness to Work. Any PERSONNEL visiting an offshore COMPANY WORKSITE shall be medically examined prior to travelling offshore. Such Medical Certificate is valid for two (2) years. CONTRACTOR shall, with regards to HSE matters, obtain support from certified experts in accordance with Dutch Arbo Law.

E.10

E.11

Emergency Preparedness and Response E.12 Not withstanding the tasks of COMPANY Site Representative CONTRACTOR shall, when working on COMPANY WORKSITE, be responsible for the provision of first aid and for carrying out other emergency response provision ("Bedrijfshulpverlening (BHV)"), as stipulated by Dutch Arbo Law, towards CONTRACTORs employees and third parties. This responsibility may only be deferred to others after written agreement, like in site specific work safety plans. CONTRACTOR shall ensure that PERSONNEL are assigned, trained and qualified to perform these tasks.

WORK SPECIFIC
Worksite HSE Coordination E.13 Not withstanding the HSE responsibilities of the CONTRACTOR the COMPANY WORKSITE Representative (LVP: Lokatie Verantwoordelijke Persoon) is responsible for HSE co-ordination at COMPANY WORKSITE (VG cordinatie). If applicable COMPANY develops a Safe Working Plan (WVP: Werkveiligheidsplan) that, as supplement to the worksite HSE Case (VG Document), details Health & Safety co-ordination at worksite. CONTRACTOR shall contribute to and comply with such WVP.

HSE Incident Management E.14 CONTRACTOR shall use COMPANYs Fountain Incident Management (FIM) system for recording incidents and related information.

Chemicals E.15 CONTRACTOR shall submit a Veiligheidsinformatieblad VIB (safety information sheet in the Dutch language), conform the REACH directive 1907/2006 when requesting permission to store, supply and/or use chemicals.

E.16

CONTRACTOR shall submit up-to-date CEFAS templates to COMPANY, when supplying chemicals covered by the OSPAR regulations (www.ospar.org).

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 24 of 39

Radiation E.17 In case CONTRACTOR uses radioactive sources or radiation emitting devices, which are not owned by COMPANY, then CONTRACTOR shall have a valid permit (KEW Vergunning) as required under the Dutch Nuclear Energy legislation (Kernenergiewet). CONTRACTOR shall confirm to COMPANY in writing that all requirements, as defined in the KEW Vergunning have been fulfilled. CONTRACTOR is not allowed to use any radioactive sources or radiation-emitting devices exceeding KEW defined exemption levels that are not explicitly covered by the related specific KEW Vergunning. CONTRACTOR shall ensure that a copy of their KEW Vergunning, as referred to in article E.17, is available on worksite at the start and for the duration of the work. CONTRACTOR shall assign a coordinator who acts as a day-to-day focal point for COMPANYs radiation experts. CONTRACTOR shall contact COMPANYs radiation experts as early as possible to meet the ALARA (As-Low-As-Reasonably-Achievable) principle for radiation. CONTRACTOR shall perform the work in accordance with COMPANY standard NSS00-G-0-21, i.e. CONTRACTOR shall assure that the application is covered in a written COMPANY Internal Permission for the planned activities in agreement with chapter 6.5 of NSS-00-G-0-21. CONTRACTOR shall work in accordance with COMPANYs REG Work Instructions (SBD Werkinstructies).

E.18

E.19

E.20

E.21

E.22

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 25 of 39

SECTION VI PART F SHELL E & P IRELAND LIMITED SPECIAL HSE CONDITIONS


Drafting note: Include the following local country specific clauses as appropriate the intended geographical coverage of the contract. If in doubt contact your local HSE Contractor Mgt Specialist. Note that some articles shall be included only in case these are relevant. These are headed by: [Conditional article delete when not relevant] Leave out clauses that are not relevant to the scope of the contract (after consulting your local HSE Contractor Mgt Specialist and/or relevant Expertise Holder).

This section contains requirements that are applicable for Ireland and shall be read in conjunction with Section VI Part A and Part B. Management of HSE F.1 Leadership and Commitment is seen as a key element to successful Health, Safety and Environmental management. The CONTRACTOR shall ensure that this quality is a key requirement during the selection of line managers, supervisors and key support personnel. The CONTRACTORs senior management shall ensure that they demonstrate a visible commitment to health, safety and environmental management. The CONTRACTORs shall ensure that all Management and Supervision roles and responsibilities reflect that health, safety and environmental management is a line management responsibility, supported and assisted by specialist advisors where required. The CONTRACTORs shall ensure adequate systems; arrangements and resources have been put in place to comply with Irish HS&E legislation applicable to the works being undertaken in this contract. This shall include, but not be limited to having a Statutory Safety Statement, which is applicable and adequate to the works being undertaken in this contract. The Safety Statement shall be revised at least annually or more frequently to reflect any changes in workplace hazards to which the CONTRACTORs employees may be exposed. The Safety Statement must be provided to anyone who may be affected by the CONTRACTORs work activities. The CONTRACTOR shall develop a site-specific HSE Management Plan document that shall outline the following HSE management elements as a minimum: i) HSE Management System. ii) HSE Programme. iii) Environmental Management standards and management arrangements relevant to the works being undertaken in this contract. iv) Arrangements for identifying and managing risk. v) HSE Management interface arrangements. vi) Site training and competency arrangements. vii) Site rules, including traffic management plans. To ensure all at risk acts and conditions are monitored and controlled, the CONTRACTOR shall ensure a behaviours intervention process is being actively implemented onsite and that all supervisors and personnel engaged in the WORK are adequately briefed or trained in its use. The CONTRACTOR shall encourage all personnel engaged in the work to participate in the intervention process.

F.2

F.3

F.4

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 26 of 39

F.5

All personnel are accountable for their own safety and the safety of others affected by their work. The CONTRACTOR shall have a formal process in place that rewards personnel for their contribution to a proactive safety culture and arrangements in place to coach and/or discipline personnel who commit safety violations. Workforce involvement in health, safety and the environment should be encouraged at all times. The CONTRACTOR shall put in place a formal process for electing or nominating workforce representatives for health and safety and for the environment. This process shall, as a minimum, comply with local legislative requirements. The CONTRACTOR shall ensure that all road transport activities carried out by the CONTRACTOR or their subcontractors is adequately managed to the standards detailed in COMPANYs Road Transport HSE Standards EP 2005-0261. Where the requirements detailed in these standards cannot be met the CONTRACTOR shall bring it to the attention of the COMPANY for review prior to the commencement of any road transport activities.

F.6

F.7

HSE Management System F.8 The CONTRACTOR HSE management system shall follow the principles outlined in: i) ii) iii) Ireland-Health and Safety Authority (HSA) Publication Workplace Health and Safety Management, or UK Health & Safety Executives document HS (G) 65 Successful Health & Safety Management, or the E&P Forum document 6.36/210 Guidelines for the Development and Application of Health, Safety and Environmental Management Systems, or British Standard BS8800: 1996 Guide to Occupational Health and Safety Management Systems, and ISO 14001 Environmental Management Systems.

iv) v) F.9

The COMPANY will assess the CONTRACTORs HSE management system checklists from Ireland-Health and Safety Authority (HSA) Publication Workplace Health and Safety Management or OGP (The International Association of Oil & Gas Producers) HSE Management guidelines for working together in a contract environment.

HSE Programme F.10 This HSE Programme shall be included in the Site Specific HSE Management Plan.

Minimum Environmental Standards F.11 The CONTRACTOR shall ensure that the following COMPANYs Minimum Environmental Standards applicable to this contract are in place and maintained: a) Have an accredited Environmental Management System (EMS) or have a documented EMS, which complies with the principles of ISO 14001. b) EU standard Material Safety Data Sheets (SDS) and COSHH sheets for chemicals, chemical selection and use in operations. c) Environmental incidents and near misses must be reported to COMPANY and investigated accordingly. d) Spill containment related to oils, fuels and chemicals.

Chemicals F.12 The CONTRACTOR shall submit the chemical handling; storage and disposal procedures to the COMPANY for review, prior to the commencement of this contract.

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 27 of 39

F.13

The CONTRACTOR shall ensure adequate equipment; arrangements and resources are made available to prevent chemical and fuel/oils spillage to sea; watercourses or the ground. And in the event that chemicals, fuels or oils are inadvertently spilled adequate containment and recover measures must be in place. CONTRACTOR shall comply with the COSHH regulations for all tasks employing the use of hazardous chemicals. CONTRACTOR supplying chemicals for offshore activities shall submit to COMPANY Material Safety Data Sheets for approval by the Petroleum Affairs Division.

F.14

F.15

Waste Disposal F.16 The CONTRACTOR shall submit to COMPANY for review an outline of the complete waste management cycle process. The CONTRACTOR shall ensure a waste segregation and minimisation system is in operation at each storage site.

F.17

Occupational Health Management F.18 The CONTRACTOR shall ensure that the following COMPANYs Health Management Standards applicable to this contract are in place and maintained. a) Health Risk Assessments shall be carried out and controls put in place to reduce the health effects on workers. b) Monitoring of health performance and Incident reporting and investigation relating to Occupational Illnesses. c) Product Stewardship duties - The necessary information and advice to minimise health risks are to be provided to employees, CONTRACTOR and customers. d) Fitness to Work standards and procedures shall be in place. e) Plans are to be in place for local medical emergencies and medical facilities. These must be to the COMPANY standards. The CONTRACTOR shall outline the Occupational Health Risk Assessments related to the works being undertaken in this contract, in the Site-specific HSE Management Plan.

F.19

Medical Fitness F.20 The CONTRACTOR shall ensure that the required numbers of trained First Aid personnel and first aid equipment is onsite, as required by Irish legislation and COMPANYs Minimum Health Management Standards. The CONTRACTOR shall be required to facilitate health and hygiene inspections on an agreed frequency by the COMPANY Occupational Health specialist. In the event that food is being processed, supplied or consumed onsite, the CONTRACTOR shall comply with COMPANYs Health Guidelines for Catering standards.

F.21

F.22

HSE Incident Management F.23 The CONTRACTOR shall use the COMPANY incident definitions and Risk Assessment Matrix criteria to define incidents and near misses. In the event that an incident or dangerous occurrence takes place as defined by the regulations, the CONTRACTOR shall discharge his legal responsibilities and submit a copy of the statutory notification to the COMPANY.

F.24

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 28 of 39

F.25

Where the COMPANY deems that an incident or near miss has occurred that has a significant potential or lateral learning potential the CONTRACTOR shall be required to present the investigation and subsequent findings to the COMPANY at an Incident Review Panel (IRP).

Training F.26 The CONTRACTOR shall provide to the COMPANY a training matrix outlining the training requirements applicable for the work undertaken in this contract. CONTRACTOR STAFF shall participate in COMPANYs HSE training schemes, as agreed between COMPANY and CONTRACTOR. Such training will be provided by COMPANY at no cost. All other costs resulting from such training will be for the expense of CONTRACTOR.

F.27

Competence F.28 The CONTRACTOR shall ensure that adequate HSE professional support and advice is available within the CONTRACTORs organisation. This support and advice must be as a minimum qualified to the NEBOSH Certificate in Health and Safety Management or equivalent level of competence. Where this level of HSE Competence is not available in the CONTRACTORs organisation, the CONTRACTOR must nominate a suitable HSE professional outwith the CONTRACTOR organisation that will satisfy the requirements of this clause. The name, proof of competence, scope of experience and proposed services to be utilised shall be submitted to the COMPANY for review prior to commencement of activities.

Personal Protective Equipment (PPE) F.29 The CONTRACTOR shall comply with the COMPANY policy with respect to the use of Personal Protective Equipment onsite and shall ensure that the policy is fully enforced at all times.

Substance (Ab)use F.30 Where there is a reasonable likelihood that an employee or a subcontractor at work is under the influence of drugs, alcohol, natural stimulants or other similar intoxicating substances, other than for bona fide medical reasons, the CONTRACTOR shall have a system in place for the testing of the person and substance as detailed in the legislation.

Security - Searches F.31 The COMPANY requires the CONTRACTOR and CONTRACTOR personnel to consent to the searching at any time by a representative of the COMPANY and under national laws and regulations of their person or of any article including, without limitation, any container, package, box, holdall, suitcase or vehicle which is in the possession or use of CONTRACTOR personnel on the COMPANY premises or offshore installation, or being transported or retained by the COMPANY on behalf of the CONTRACTOR or CONTRACTOR personnel.

Security - Standards and Reviews F.32 The CONTRACTOR shall be required to comply with the relevant COMPANY security standards and procedures that are deemed appropriate for the type of location and work being carried. The COMPANY reserves the right to carry out a security review of the CONTRACTORs premises from time to time, and where appropriate require improvement actions to be carried out

F.33

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 29 of 39

Radiation F.34 In case CONTRACTOR uses radioactive sources, which are not owned by COMPANY, then CONTRACTOR shall have a valid permit (Registration) as required under the Radiological Protection Act 1991 and associated regulations. CONTRACTOR shall confirm to COMPANY in writing that all requirements, as defined in the Registration have been fulfilled. CONTRACTOR is not allowed to use any radioactive sources unless explicitly notified to the COMPANY Radiation Protection Supervisor in advance. CONTRACTOR who may work with Naturally Occurring Radioactive Material (NORM) at COMPANY WORKSITE shall have 'Local Rules' in place to meet the requirements of the Ionizing Radiation Regulations. CONTRACTOR shall ensure that a copy of their Registration, as referred to in article F.34, and 'Local Rules' are available on worksite at the start and for the duration of the work. CONTRACTOR shall assign a coordinator who acts as a day-to-day focal point for COMPANYs Radiation Protection Supervisors. CONTRACTOR shall assure that the work is also in accordance with COMPANY 'Local Rules'.

F.35

F.36

F.37

F.38

F.39

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 30 of 39

SECTION VI APPENDICES

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 31 of 39

APPENDIX 1 OVERVIEW OF HSE STANDARDS, HSE SPECIFICATIONS AND OTHER HSE REQUIREMENTS Drafting note: Please make sure that this list refers to (HSE) CMS requirements and other HSE requirements applicable to the contract. You can use: The pick-list Contract HSE requirements from CMS,. The pick-list Contract HSE requirements not part of CMS Both to be provided by Contractor HSE Mgt Team IMPORTANT: Keep this restricted to requirements that are REALLY RELEVANT for this particular contract(or). Be complete but avoid ballast! If in doubt, contact the relevant Expertise Holders. Delete the empty headers.

Doc no.

Doc. Title Policies and Rules Use picklist to determine relevant CMS docs HSE Management System Use picklist to determine relevant CMS docs HSE Management System Interfacing Worksite HSE Co-ordination HSE Risk Management

UK

Region: Norw. NL

Ireland

Occupational Health and Working Environment Medical Fitness Environment Worksite HSE Co-ordination HSE Competency HSE Training HSE Communication & Reporting Incident Management Emergency Response Adverse Weather Working Alcohol and Drug Abuse Air Transport Behavourial Safety Benzene Chemicals Confined space Electrical safety Excavation Explosives Exposure to acute toxics

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 32 of 39

Doc no.

Doc. Title Food / drinking water safety Gasfreeing & Cleaning H2S Hot work Isolation of Plant Legionella Lifting & Hoisting Marine Medical Fitness / Fitness to Work Mercury Noise / Hearing Conservation Personal Protective Equipment (PPE) Radiation Refrigeration Road Transport Safe Workplace Safety Engineering Security / System security Stress Subcontractor Management Substance (Ab)use Underwater Operations Vibration Waste Working at Height Worksite Specific Key information

UK

Region: Norw. NL

Ireland

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 33 of 39

APPENDIX 2 COMPANYHSE POLICY

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 34 of 39

APPENDIX 3 COMPANY HSE GOLDEN RULES

Shell Exploration & Production Shell Exploration & Production

HSE GOLDEN RULES

COMPLY > INTERVENE > RESPECT

You and I: Comply with the law, standards and procedures Intervene on unsafe or non-compliant actions
Owner EPE HS&E

Respect our neighbours

20-Jan-04

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 35 of 39

APPENDIX 4 COMPANY LIFE SAVING RULES

1.5 cm

Life-Saving Rules
Work with a valid work permit when required Verify isolation Obtain before work begins Obtain authorisation and use the authorisation before overriding Protect yourself specified life Conduct gas before entering or disabling against a fall protecting tests when a confined safety critical when working at equipment required space equipment height

10

11

12

Do not walk under a suspended load

Do not smoke outside designated areas

No alcohol or While driving, do drugs while not use your working or phone and do not driving exceed speed limits

Wear your seat belt

Follow prescribed Journey Management Plan

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 36 of 39

APPENDIX 5 MONTHLY REPORTING CONTRACTOR HSE STATISTICS Reporting format CONTRACTOR shall report monthly HSE Statistics preferably using the following format. MS Excel template can be obtained from CONTRACTOR Representative. Reporting shall be restricted to WORK performed under the CONTRACT, but shall include SUBCONTRACTORs activities. Example:
Contract Statistics

HSE Performance of Contractor: XXXXXX


No. of Fatalities

Contract No: XXXXX


Total Recordable Cases Total Recordable Cases Frequency

Data

Exposure hours

No. of No. of No. of No. of No. of Lost Total number Total Permanent Restricted Medical First No. of Lost Workday of env. non- number of Total Workday Treatment Aid Time Injuries Cases conformance e-spills Disabilities Cases Cases Cases

Comments: 1. High risk contract 2. High incidence during s/down

Date JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC TOTAL

Exp. Hours 334.000 352.000 310.078 370.034 487.634 324.566 421.356

FAT 0 0 0 0 0 0 0

PTD 0 0 0 0 0 0 0

LWC 1 0 0 2 0 0 1

RWC 0 0 0 0 0 0 2

MTC 1 2 4 1 1 0 3

FAC 1 12 5 8 2 1 8

E-nonc 0 0 0 0 0 0 1

E-spill 0 0 0 0 0 0 4

2.599.668

12

37

LTI 1 0 0 2 0 0 1 0 0 0 0 0 4

TRC 2 2 4 3 1 0 6 0 0 0 0 0 18

TRCF 6,0 5,8 8,0 8,1 6,5 5,5 6,9 6,9 6,9 6,9 6,9 6,9 6,9

Activity
1. Hand campaigns 2. Competence review 3. Last minute risk analysis programme rollout

HSE Improvement Activities follow up actions comments on follow-up BPR FIELD


Y Y Y Y Reviewed materials Hand injuries are reducing and TRCF stats Review of staff turnTRCF reducing over and training Number of staff trained Well received by staff. Now used by contractor for non-Shell work as well

HSE Performance
20 18 16 14 12 10 8 6 4 2 0
JAN FEBMARAPRMAYJUN JULAUGSEPOCTNOVDEC

600.000 500.000 400.000 300.000 200.000 100.000 0 Month E-spill E-nonc FAC MTC RWC LWC PTD FAT Exp. Hours TRCF

Definitions Exposure Hours The total amount of man-hours (office, onshore worksite, offshore, etc.) spent on WORK on the CONTRACT. This includes Subcontractor man-hours. Fatality (FAT) A death resulting from a work related injury or occupational illness, regardless of the time intervening between the exposure or incident causing the injury or illness and the death. Permanent Total Disability (PTD) Any work related injury that permanently incapacitates an employee and results in termination of employment. Lost Workday Case (LWC) Any work related injury that renders the injured person temporarily unable to perform their normal work or restricted work on any day after the day on which the injury occurred. In this case any day includes rest day, weekend day, scheduled holiday, public holiday or subsequent day after ceasing employment." Restricted Work Case (RWC)

Incident data

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 37 of 39

Any work related injury which renders the injured person temporarily unable to perform all, but still some, of their normal work on any day after the day on which the injury occurred. Medical Treatment Case (MTC) Any work related injury that involves neither lost workdays nor restricted workdays, but which requires treatment by a physician or other medical specialist. Note that in case an MTC has been classed as LWC or LTI, reporting it as MTC shall be avoided. First Aid Case (FAC) Any single treatment and subsequent observation of minor scratches, cuts, burns, splinters, etc. that do not normally require medical care by a physician. Such treatment and observation is considered First Aid Case even if provided by a physician or registered professional personnel. Note that FAC is not included into TRC. Lost Time Incidents (LTI) The sum of injuries resulting in Fatalities, Permanent Total Disabilities and Lost Workday Cases, but excluding Restricted Work Cases, Medical Treatment Cases and First Aid Cases. LTI = FAT + PTD + LWC. Total Reportable Cases (TRC) The sum of injuries resulting in Fatalities, Permanent Total Disabilities, Lost Workday Cases, Restricted Work Cases and Medical Treatment Cases, but excluding First Aid Cases. TRC = FAT + PTD + LWC + RWC + MTC. Total Reportable Case Frequency (TRCF) TRCF = (TRC / exposure hours) x 1,000,000. Environment non-conformance (E-nonc) This is the sum of environment incidents/non-conformances that have been reported within the company and/or to the National Regulating Authority. This includes breaches of regulations, permits and airborne emissions. Environmental Spills (E-spill) For reporting purposes, a spill is the quantity of oil/chemical spilt (excluding sabotage related spills) for all spills that are equal to or larger than 0.1 tonne. A spill is defined as any unexpected loss to water or land of crude oil, condensate, feed stocks, intermediates, chemicals or process materials. This excludes any spillage, which is wholly contained and does not reach the receiving environment. Spills or discharges of Produced Water are excluded.

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 38 of 39

Shell UIE - HSE Conditions of Contract Type MAX Model Rev. 11 February 2010

Page 39 of 39

APPENDIX 6 CONTRACTOR EMERGENCY CONTACT DETAILS LIST As stated in article A.3.71 CONTRACTOR shall provide Contractor Emergency Contact Details list in the following, or similar, format. During the CONTRACT period CONTRACTOR shall inform COMPANY immediately of any changes to this list.

CONTRACTOR Contractor company name Contact person Tel.no. (24hrs per day / 7 days per week) nd 2 Tel.no. (24hrs per day / 7 days per week) Mobile no. (24hrs per day / 7 days per week) nd 2 Mobile no. (24hrs per day / 7 days per week) COMPANY Contract Holder Ref. Indicator Contract Holder Tel.no.

To be completed by COMPANY To be completed by COMPANY To be completed by COMPANY

Vous aimerez peut-être aussi