Académique Documents
Professionnel Documents
Culture Documents
I. INTERFACE A. TOOLSPACE --> PROSPECTOR TAB --> SETTINGS TAB --> SURVEY --> TOOLBOX II. TERMINOLOGIES A. POINTS B. POINT GROUPS C. SURFACE D. ALIGNMENTS E. SITES F. PIPE NETWORKS G CORRIDORS H. I. J. K. III. MODELING A. POINTS ASSEMBLIES SUBASSEMBLIES INTERSECTIONS SURVEY
in this tab, you can create points, surface, alignments , corridors, and etc here you can adjust how your drawings will work and how will it look
--> --> --> --> --> --> --> --> --> --> -->
Objects or markings in Auto Desk Civil 3d, such as tress, benchmarks, basins and etc Group of points that have the same descriptions Represent the ground condition at the particular site. Used to represent road centerlines, ROW, side walks, edges of pavements
Collection of pipe objects and structure object that are used to represent a network in a drawing A path, length and location of which is typically governed by one or more horizontal or vertical alignment
--> ALWAYS SHOW THE TOOLSPACE TAB --> In toolspace tab, right click POINTS, then click CREATE ----> This tab should appear
7 --> --> In this option, click a location you want to designate a point, input its Description and Elevation . Click your starting point, specify if your input value is an azimuth or bearing, specify its quadrant, enter its angle then click where do you want the point be loacated and follow the same procedure as before Select an Alignment , specify the station in the alignment, enter your offset (in Y direction), enter the Description and Elevation In the available Surface , click the location of the point, enter its Description and Elevation
3 4 5
6 7 B. POINT GROUPS
--> -->
--> The Toolspace Tab must be in Settings Tab --> Before creating Point Groups, you must have your DESCRIPTION KEYS. DESCRIPTION KEYS --> Use to control Point Apperance and some properties
In Setting Tab, double click Points, right click DESCRIPTION KEY SET, choose NEW, enter its Name and Description In DESCRIPTION KEY SET , right click your created set, and choose Edit Keys In Edit Keys, specify Code, Style, Format, Layer and Etc. Back your TOOLSPACE in PROSPECTOR TAB Select the Points you want to be in group
On Toolspace Tab double click SURFACE Specify the Surface, its Name, Description, Style and Render Materials Press OK Find your Created Surface and Click its Definition Right Click Point Groups, then Add Choose your created Point Group , Select Apply then OK
D. ALIGNMENTS
Draw a Polyline that will serve as your Alignment From Menu tab, Click Alignment Select Create Alignment from Objects Choose your Alignment (the Polyline you draw) Press Enter Define its Name , Type , Station , Style , etc .
Mpa mm mm kn-m kN mm
3 2
mm4