Académique Documents
Professionnel Documents
Culture Documents
TRADING DESK
www.sbfi.com www.sbfi.com
www.sbfi.com
DESK SPECIFICATION
A. B. C. Full depth 25mm thick work surface with moulded polyurethane nosing and rear anti-spill upstand. Available in low glare Laminate, Veneer or Linoleum finish. Removable plinth access doors with ventilation pattern and thumb-turn catch. Horizontal Monobeam accessory rail for flatscreen support mechanisms, power modules and loom connections. Shared Endframe with extruded Aluminium vertical legs which incorporate a cable management channel and termination area for power and data distribution. Central Ventilation Chimney with curved top profile. Perforated area is balanced with door intake to ensure warm air exhausts without restriction. Fully articulated Axiom flatscreen support mounted to quick release vertical posts. Arms have integral cable management.
F E C
D. E. F.
B D
www.sbfi.com
www.sbfi.com
Height Selectable
Worksurface can be set at a height between 720 770mm FFL, in 10mm increments. Access to the technology tray is through the lift out rear infills.
Easy adjustment Height is adjusted by slackening two locking bolts and fixing setter screw in hole for desired height.
www.sbfi.com
Adjustment for IT access Height adjustment to raise worksurface to 1395mm providing access to the technology tray and plinth. Controls are removable and only issued to trained facilities personnel to ensure worksurface is only raised by authorized persons.
Tested by FIRA to conform to : BS EN 527-1 (2000) Office furniture. Work tables and desks. Dimensions. BS EN 527-2: (2002) Office furniture. Work tables and desks. Mechanical Safety requirements BS 6396: (2002) Electrical systems in office furniture and office screens.
Controller options
Up / Down buttons Basic controller to allow full travel of leg when buttons depressed.
Digital controller Can be programmed with 3 preset heights. Digital readout to shown worksurface height.
Desktop height adjusted by either facilities or with a control on every desk by individuals. Height can be adjusted to assist posture. Normal range of travel is 720 770mm for this purpose.
Worksurface is raised to a position suited to user when standing. Controllers would be issued to every desk so users can vary between sit and stand positions.
www.sbfi.com
Data outlets on a 1.8m x 1.8m grid. At each grid location, the cables will be anchored to the floor, and then installed within 7metre umbilical tail, then terminated within a Floor Outlets Box.
Data boxes will be passed through a floor grommet(s) and be mounted directly into the dealing desks on the Timber termination board.
www.sbfi.com
Desktop Outlets Main Loom outlets for USB, Serial, dealer board etc. Mounted on the rear beam for ease of access.
Desk Loom
Flexible articulated cable management to route cables from worksurface to the PC trolley on a sitstand desk frame. With quick release function on back of CPU trolley.
Mass connector Mass connector fitted to the rear of the trolley. Allows quick removal and relocation of trolley on trading floor.
Video pod Outlets for Audio and video fitted at high level on Slatwall or post to ensure it is close to the screens it supplies.
www.sbfi.com
Internal Cable Trough Flexible cable trough fixed to the underside of the worksurface. To house power specifically for the monitors thereby minimising the number of cables to be managed when the desk work surface is elevated.
IT accommodation
Monobeam Accessory tool bar for Flatscreen support, Power mounting and cable management.
Anaconda To contain and route cables from the tray to the underside of the work surface.
Access doors Latched hinged lift off doors with optional upgrade of thermal backing
www.sbfi.com
C - Personal power Personal power module mounted at desk top level on monobeam.
A - Integral cable channels Cable channels throughout desk frame to ensure clear and protected cable routes.
D - Desk internal power Sockets mounted on the underside of the worksurface so screen and desktop cables have a shorter distance to travel MCB on the timber Termination board. Sockets can also be mounted in the tray.
B - Cable clips SBFI have a range of cable clips to manage cables around the desk from plinth to Slatwall.
www.sbfi.com
www.sbfi.com
Cable clips Nut groves allow the fitting of cable ties and clips
Quick release vertical post To fit axiom flatscreen arms. Power A range of power modules can be accommodated
Cable tray Flexible tray that travels up and down with height adjustable Worksurfaces
www.sbfi.com
AXIOM ARM FEATURES Top loading quick release vesa head Release screen in seconds User height adjustment Adjust monitor height by up to 125mm with a user operated handle Cables Simple hook-over cable management
www.sbfi.com
www.sbfi.com
HEAT MANAGEMENT
Axess is designed to have a natural airflow through the desk. Ambient air is drawn through the door vents by CPU fans Direct air exhausted from CPUs is stopped by a non-ventilated door Warm air from plinth exhausts through chimney
2.
3.
Right hand door has no perforations to ensure warm air expelled from the back of the CPUs is not directed to the user. The warm air stops at the door and travels up to the chimney. Central Ventilation Chimney with curved top profile. Perforated area is balanced with door intake to ensure warm air exhausts without restriction.
www.sbfi.com
B A.
B. C D C. D. A
Finger pull Polyurethane nosing incorporating a finger pull detail to the underside to aide body/chair manoeuvrability.
www.sbfi.com
FILE ENCLOSURE
Laminate or veneer carcass Laminate, linoleum or veneer worktop available with square edge or moulded polyurethane nosing FEATURES Equipment access flap at rear Available as single file enclosure to suit single desk Provides end of run location for printers/ fax machines
www.sbfi.com
PEDESTAL
Available in square or fast back configurations Metal or timber construction including timber drawer front on metal carcass FEATURES Lockable three drawer mobile pedestal, incorporating : Top - Personal drawer with pen tidy tray Middle General purpose box drawer Bottom - Filing drawer to accommodate A4 hanging files Optional removable upholstered seat cushion Fabric can be Camira or Kvadrat all ranges. Specialised pencil trays and dividers also available
www.sbfi.com
End panels
end panels available in veneer, laminate and glass Glass end panels available in clear, opaque or sand-blasted finish and with personalised digitally printed graphics
www.sbfi.com
www.sbfi.com
www.sbfi.com
ERGONOMICS EXCELLENCE
www.sbfi.com
*51
-/ 15 6 - 4-
SBFI is the leading global supplier of specialist furniture with installations in over 50 countries worldwide.
To find out more about how SBFI can help your business, call our staff in London, New York, Hong Kong or Sydney.
uk
SBFI Limited The Hop Exchange 24 Southwark Street London SE1 1TY England Tel +44 (0)20 7407 0271 Fax +44 (0)20 7403 6781 Email sbfi@sbfi.com
www.sbfi.com
america
SBFI North America 701 7th Avenue New York NY 10036 USA Tel (212) 269 6800 Fax 868 458 3580 Email sbfi@sbfi.com
asia
SBFI Limited 7A Wyndham Place 40-44 Wyndham Street Central Hong Kong Tel (852) 2858 4411 Fax (852) 2517 6546 Email sbfi@sbfi.com
australia
SBFI Level 57 MLC Centre Martin Place Sydney NSW 2000 Australia Tel (612) 9238 7613 Fax (612) 9238 7633 Email sbfi@sbfi.com
www.sbfi.com