Académique Documents
Professionnel Documents
Culture Documents
...the
performance
system.
Hollo- Blast: Hollo.Blast PipeCleaningTool Is designed to blast clean small pipe ranging in size from 2" to 12" inner diameter. This tool, which has no moving parts. utilizesa built. in, short venturi. TungstenCarbidenozzle and Tungsten Carbide deflection tip to spray acceleratedabrasivein a 360 blast pattern. Tungsten Carbide deflection tip. stem sleeves. and stem support ensure long wear life.
Spin-Blast: Designed blastclean largediameterpipe to with the samedirect force as standardblast nozzles. Two Tungsten Carbide nozzles provide mechanism to rotate blast head whil~ propelling abrasive to the surface. Cleanspipe at rates unobtainable by any other meansdue to its hard hitting force.
Hollo-Blast Junior is assembledwith one standard tungsten carbide nozzle that requires80 CFM of compressed air. Four setsof centeringcollars are fumishedwith the unit to permit adjustment to various sizes within the 1.' to 2" range. Tool by
itself will slide into 3/4" I.D.
Two new centering carriages have been developed to improve Spin-Blast travel through piping. Model CSC-O817 carriage covers diameters from 8" to 17"; model CSC-I236 handles 12" to 36". Each carriage Is quickly and easily adjustable. Five nozzle sizes are available to obtain the best possible cleaning rate. Nozzle selection is based on severity of surface condi. tion and compressed air supply. Standard unit is fumished with 1/4'. orifice 1-3/4" long nozzles, Refer to chart below for recommendations that apply to specific applications,
Pipe Diameter
8",12"
Spin-Blast Carriage
CSC.0817 (Carriage exterxia to 17")
Recommended Compressor Size. 1/4" x 1-3/4" Long (188-01408) 250 CFM 5/16" x 1-3/4" Long (188-01409) 365 CFM 3/8" x 1-3/4" Long (188-01411) 600 CFM
5/16" x 3" Long (158-01410) 3/8" x 4" Long (158-01412) 365 CFM
Abrasive Size
16-40 Mesh 16-40 Mesh 16-40 Mesh
12".24"
24"036" .Allows for surplus all
CSC-1236 CSC-1236
16.40 Mesh
16.40 Mesh
600 CFM