Académique Documents
Professionnel Documents
Culture Documents
New section devoted to WEB tools BASOR has opened a new web portal especially devoted to installers and engineers. The portal contains different tools which shall help users solve issues such as the choosing of the adequate cable tray or support. Give it a try!
I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL Y BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST ASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT SORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORCANAL BASORTUB BASORFLEX BASORTRUNKING I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL Y BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST ASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT SORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY SORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR PLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING
Fixed structure photovoltaic electrical systems BASOR has opened a new technical department which specialises in the development of fixed structures for photovoltaic electrical systems, both on the floor and on the ceiling. Consult us!
New support systems BASOR has been trying for years to provide its clients with the most adequate product for their electrical systems without having to invest more than what is strictly necessary. For this reason, BASOR has launched products which complete their ranges so that the solution chosen fulfils all your needs.
Fire-resistant cable conduction systems BASOR has expanded the solutions available for emergency electrical systems where the evacuation systems must continue functioning in case of fire.
Conduit cable conduction system New range of products for superficial electrical systems. Rigid conduits RE1250 and R1250 are adequate for all kinds of superficial electrical systems and have a minimum compression strength of 1250N. FLEXL flexible conduits have been designed to protect the cables in robots, spinning tables, solar trackers and, generally speaking, machinery which is in constant movement.
BASOR BASORTRAY BASORFIL BASORTRAV BASORSUP BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTUB BASORFLEX BASORTRUNKING B BASORPLAST BASORCANAL BASORTUB BASORFLE BASORSUPPORT I304 BASORPLAST BASORCANAL BASORFIL BASORTRAV BASORSUPPORT I304 BASORP BASOR BASORTRAY BASORFIL BASORTRAV BASORSUP BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTUB BASORFLEX BASORTRUNKING B BASORPLAST BASORCANAL BASORTUB BASORFLE BASORSUPPORT I304 BASORPLAST BASORCANAL BASORFIL BASORTRAV BASORSUPPORT I304 BASORP BASOR BASORTRAY BASORFIL BASORTRAV BASORSUP BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTUB BASORFLEX BASORTRUNKING B BASORPLAST BASORCANAL BASORTUB BASORFLE BASORSUPPORT I304 BASORPLAST BASORCANAL BASORFIL BASORTRAV BASORSUPPORT I304 BASORP BASOR BASORTRAY BASORFIL BASORTRAV BASORSUP
is a recognised leader in the industry and has more than 30 years of experience in its sector. offers an industrial compromise, seeking solutions within the industry. offers the possibility of manufacturing products personalised for each client, fulfilling needs which the market fails to fulfil. offers one of the broadest ranges of cable conduction systems in Europe.
SCM
SCE SBT
CEP ACC
SCP
PPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX L BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 EX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV L BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY PLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING PPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX L BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 EX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV L BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY PLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING PPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX L BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 EX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV L BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY PLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING PPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX
SELF-ASSEMBLY system for metallic cable trays and trunkings: The self-assembly system is the most efficient, economic and quick joining method for cable tray systems. Due to the fact that it doesnt require joint plate accessories, the installation time is reduced and the assembly becomes a much easier task. Two joint cable trays confer the union joint a rigidity which is much higher than those of traditional systems, avoiding the movements which happen between the two cable trays. In the case of trunkings, the self-assembly system confers it a higher sealing degree. In the union between the two cable trays, one of them is placed inside the other, sealing the joint from the inside of the cable tray and hence avoiding the penetration of external agents. The covers have this same characteristic, avoiding in the same way the penetration of external agents as one cover is over the other and there is no space left between both covers. Moreover, this system guarantees a good trunking, even when the operator leaves the cable trays with a few millimetres of separation between them and, as the system overlaps, this allows the correction of such faults. In all types of cable trays and trunkings, the joining of different stretches by way of self-assembly systems confers it a greater electrical continuity between the stretches, as the contact surface is greater. The models manufactured by Basor which deploy a self-assembly system are ERE, FRE and FE cable trays. To sum it all up, the self-assembly system is the safest, most economic and quick system for joining different stretches of cable trays. HIGH LOADS BASORFIL system: One of the main flaws of wire-mesh cable trays is the poor resistance to flexion which they have. Therefore, BASOR has designed a high loads system for BASORFIL BFR cable trays which confers the cable tray a resistance to flexion which is much higher than the resistance of conventional BASORFIL BF cable trays, where the wire-mesh cables are totally straight. Due to the wire-mesh cables deflection, the BASORFIL BFR system is characterised by the high level of stiffness of the cable tray. Moreover, BASORFIL BFRs exclusive design allows the level of the cables to be the same in the whole wire mesh, being safer than the conventional system, as it doesnt allow the cable to rest solely on the transversal wire-mesh cables.
ALVEOLAR system: The alveolar system belonging to the BASORPLAST BPI family confers the product a greater resistance to flexion/weight, facilitating its installation, manipulation and transport. Its excellent design in the shape of alveoli confers it a bending momento which is between 12 and 14 % greater than the bending momento of the conventional model, allowing alveolar cable trays to behave elastically in extreme situations where conventional cable trays behave plastically and have a risk of collapsing.
INDEX
DIMENSIONS OF CABLE TRAYS AND SUPPORTS CALCULATING THE WEIGHT AND AREAS OF THE CABLES CHOOSING THE TYPE OF CONDUCTION, MATERIAL AND COVERING CHOOSING THE RIGHT CABLE TRAY CHOOSING A HORIZONTAL SUPPORT CHOOSING A CEILING SUPPORT SELECTION PROCESS WHEN THERE ARE CABLE CONDUCTIONS ONLY ON ONE SIDE OF THE PENDANT SELECTION PROCESS WHEN THERE ARE CABLE CONDUCTIONS ON BOTH SIDES OF THE PENDANT INDEX OF PRODUCTS SCM - METALLIC CABLE CONDUCTION SYSTEMS CARBON STEELS BASORTRAY - METALLIC CABLE TRAYS BASORFIL - WIRE-MESH CABLE TRAYS BASORTRAV - CABLE LADDERS BASORSUPPORT - SUPPORT SYSTEMS STAINLESS STEEL I304 SYSTEMS ALUMINIUM SCP - INSULATING CABLE CONDUCTION SYSTEMS SCE - TRUNKING CABLE MANAGEMENT SYSTEMS SBT - INSULATING CONDUIT CABLE CONDUCTION SYSTEMS CEP - BUSBAR TRUNKING SYSTEM ACC - INSTALLATION AND ASSEMBLY ACCESSORIES SOLAR ENERGY FIXED STRUCTURES FIRE RESISTANT ASSEMBLIES TECHNICAL APPENDIX TECHNICAL APPENDIX INDEX DESIGN PROCESS MATERIALS AND FINISHES CORROSION. DEFINITIONS DEGREES OF PROTECTION AGAINST CORROSION STANDARD MATERIALS AND FINISHES SPECIAL MATERIALS AND FINISHES CABLE TRAY DIMENSIONS VENTILATION AND SEALING DEGREE DETERMINING THE WORKING LOAD (WL) SAVE WORKING LOAD (SWL) SPAN LENGTH DEFLECTION MINIMUM AREA OF THE CABLE TRAY SPACE LIMITATIONS SERVICE TEMPERATURE. THERMAL CONTRACTIONS AND EXPANSIONS ELECTRICAL CONTINUITY ELECTROMAGNETIC COMPATIBILITY COST OF MATERIALS VS. FINAL COST OF THE SYSTEM USE OF THE SAVE WORKING LOAD (SWL) GRAPHS CABLE TRAYS HORIZONTAL SUPPORTS PENDANTS Load on one side Load on both sides 6-11 6 7 7 9 10 10 11 12-13 14 50 60 78 94 108 112 128 138 146 152 171 181 189 190 191 192 192 193 194 197 199 199 199 201 202 202 202 203 204 204 205 206 207 207 208 208
4 INDEX
INDEX
UNIT CONVERSION TABLE TECHNICAL INDEX CARDS 210 211-313
ACRONYMS
ACRONYM L BP BC SWL Pap (Nm) B H UVM UVE REF. e A, B, . PC MEANING LENGTH CABLE TRAY NON-PERFORATED CABLE TRAY SAVE WORKING LOAD TORQUE IN Nm BASE HEIGHT MINIMUM SELLING UNIT PACKAGING SELLING UNIT REFERENCE THICKNESS ADDITIONAL DIMENSIONAL SIZES WITH TECHNICAL DETAIL PC PROFILE ACRONYM TR Dc Fmax Mmax Min Ta Max Ta C IK IP A (cm) DN Rcomp Rimp MEANING THREADED ROD DEFORMITY COEFFICIENT MAX. TORSION/COMPRESSION FORCE MAX. BENDING MOMENT MIN. WORKING TEMPERATURE MAX. WORKING TEMPERATURE DEGREES CELSIUS IK RATING IP RATING USEFUL AREA NOMINAL DIAMETER COMPRESSION STRENGTH IMPACT STRENGTH ACRONYM Dext Dint In (A) (Hz) 3FN FN A Wx Wy Qreac Reduc Qtrac MEANING EXTERIOR DIAMETER INTERIOR DIAMETER NOMINAL INSTENSITY (AMPS) FRECUENCY 3 PHASES AND NEUTRAL PHASE AND NEUTRAL AREA MODULUS RESISTANT TO X MODULUS RESISTANT TO Y REACTION LOAD % OF REDUCTION OF THE WORKING LOAD OF PROFILE TRACTION LOAD
INDEX 5
2
[s]
[H]
4
[B]
1 2
Calculating the weight and areas of the cables. Choosing the type of conduction, material and covering.
Choosing the right cable tray [B] x [H] [s] Support span
4 5
1.1. Defining the electrical connections and the conductors for each one As an example of its design, we shall take an electrical connection of which we have all the data provided by the cable manufacturer:
1.2 Calculating the cable tray AREA (Amin) necessary for each cable conduction system For this calculation, as the cables real section does not reflect the useful area needed by the cable, the useful area of such cable shall be calculated as follows: Auseful= 2 With this data, adding up all of the useful sections of each cable and applying the security coefficient for future enlargements, the minimum area is obtained. C.S. Amin = 1 + n Auseful 100 In the example which we are using, with a security coefficient of 40%, the
n Weight
At this point, its necessary to decide the [TYPOLOGY] of the cable tray which is going to be used. Nevertheless, one has to bear in mind that normally, in order to look for the most economic option, different types of cable trays shall have to be taken into consideration, as this parameter shall influence other aspects of the system such as the maximum support span and, therefore, the number of support needed and the time required for their assembly. Depending on the type of conduction which you are seeking, you may consider the following alternatives:
Humid
SCM
SCP
GS CINCADO BICRO GC GSE I304 PVCM1 PP7035 PA6 PA6-V0 PA12 GSP GCE I316 AL AL6063T6
R R R E R E R R R R R R E E E E
L L L R R E R R R R R R E E E E
NR NR NR L R R R R R R R L R E R R
NR NR NR NR R R R R R R R R R E R R
For additional information regarding the characteristics of each type of conduction or regarding the different finishes, consult the Technical Appendix (Page 193).
Process to be repeated for each cable conduction system Data to start off with: Qmin y Amin calculated in sections 1.2 and 1.3 respectively. [TYPOLOGY] selected in section 2. a) Go to the section of the catalogue which corresponds to the [TYPOLOGY] which you have selected. In the first page of the selected product, you shall find a table showing the useful areas. b) Choose a cable tray which fulfils the principle of [USEFUL AREA] > Amin. c) Find the table of the corresponding product. d) Verify that the SWL (kg/m) of the tray chosen is > Qmin1.
Selection process:
The catalogue displays the values of the SWL (Save Working Load) for the recommended support span [d]. To obtain the values of the [SWL] with other [d], consult the Technical Appendix.
Urban L L L R L E L R R R R R E E R R
Dry
R BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX AREA UTIL (cm2) BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX B (mm) H35 H60 H80 H100 ASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV 100 34 59 78 98 BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY 150 51 89 118 148 SORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING 200 69 119 198 R BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST158 BASORCANAL BASORTUB BASORFLEX 300 103 178 238 298 BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX 400 238 317 397 ASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV 500 298 397 497 BASORSUPPORT INOX BASORPLAST600 BASORCANAL BASORTUB BASORFLEX477 BASORTRUNKING BASOR BASORTRAY 358 597 SORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING R BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL The first cable tray which complies with the conditions BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORTUB BASORFLEX BASORTRUNKING of Amin>104 cm2 is the B=200 mm and H=60 mm cable tray. ASORPLAST BASORCANALBASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASOR BASORTRAY BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BANDEJA DE CHAPA PERFORADA ERE H60 BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT GC INOX BASORPLAST BASORCANAL UVM UVE B H d=1,5 GS SORFIL BASORTRAVBASORFLEX BASORTRUNKING BASORTUB BASORFLEX BASORTRUNKING BASORTUB BASORSUPPORT INOX BASORPLAST BASORCANAL (kg/m) REF. kg/m BASOR BASORTRAY BASORFIL REF. BASORTRAV BASORSUPPORT INOX kg/m DESCRIPCION m m mm mm CTA R BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRAV BASORPLAST BASORCANAL B/P ERE 100X60 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL 3 24 100 60 85 2/1197 0,95 2/1227 1,42 BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTRAY B/P ERE 150X60 3 18 60 85 2/1198 1,17 2/1228 1,74 BASORSUPPORT INOX BASORPLAST BASORCANAL 150 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTUB BASORFLEX BASORTRUNKING BASOR12 200 BASORTRAY BASORCANAL BASORTUB BASORFLEX BASORTRUNKING B/P ERE 200X60 3 60 85 2/1199 1,46 2/1229 1,99 BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORFIL BASORTRAV BASORSUPPORT INOX B/P 3 BASORTRUNKING BASOR BASORTRAY 12 300 60 85 2/1201 2,03 2,56 ASORPLAST BASORCANALBASORFIL ERE 300X60 BASORTUB BASORFLEXBASORSUPPORT INOX BASORPLAST2/1231BASORFIL BASORTRAV BASORFLEX L=3m BASOR BASORTRAY BASORTRAV BASORCANAL BASORTUB B/P ERE 400X60 3 6 400 BASORFLEX BASORTRUNKING 3,54 60 100 2/1202 2,86 2/1232 BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASOR BASORTRAY BASORTRUNKING BASOR BASORTRAY BASORFIL 500 BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL B/P ERE 500X60 6 60 100 SORFIL BASORTRAVBASORFLEX BASORTRUNKING3 BASOR BASORTRAY2/1203 3,38 2/1233 4,19BASORTRUNKING BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTUB BASORFIL BASORTRAV BASORSUPPORT INOX B/P ERE 600X60 3 6 600 60 100 2/1204 3,91 2/1234 4,83 R BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRAV BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL
B
H
10x7.5
20x7.5
7.5x7.5
BASORSUPPORT INOX BASORPLAST inBASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY number 2/4356 GS or 2/6826 in GC (products packed in bags containing 100 units). When cut has been done at the BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASORFIL BASORTRAV BASORSUPPORT INOX workplace, JUER H60 couplers, with reference number 2/2048 in GS or 2/2053 in BASOR BASORTRAY BASORFILGC must be used. BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFILthat the BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX ASOR BASORTRAY BASORFLEX BASORTRUNKING In this case, one must verify BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORPLAST of B=200 mmBASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLASTBASORFIL BASORTRAV BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORCANAL cable tray selected BASORTRUNKING BASOR and
160 H=60 mm is valid, BASORFLEXthe BASORTUB as the SWL and BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX 30 support span [d] selected are less than BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV CTA 100-300 140 Qmin (85>26). CTA 400-600 BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY 25 ERE H=60 mm
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts, with reference
Def 120 Should you want to increase the BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING support span, BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX ASOR BASORTRAY browse through the 100 20 Technical Appendix, where you will find BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL that cable trays can also be supported 80 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX 15 Def = 14 mm (for example)BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV every 1.9 meters. The CTA = 60 kg/m BASORPLAST 60 SWL is approximately 60 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORSUPPORT INOXkg/m, with a 10 deflection of 14 mm in the centre of 40 BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING the span. ASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB5BASORFLEX 20 For the case which we are illustrating, BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL weBASORTUB BASORFLEX to shall suppose that, due BASORTRUNKING1.1 1.2 1.3 1.4 1.5 1.6 BASORFIL BASORTRAV2.3 2.4 2.5 1.0 BASOR BASORTRAY 1.7 1.8 1.9 2.0 2.1 2.2 BASORSUPPORT INOX construction limitations attributable to BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING d (m) BASOR BASORTRAY BASORFIL BASORTRAV the project, the support BASORSUPPORT INOXspan is fixed BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY at 1.5 m. BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING ASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX Output data: BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL Cable tray model: Base [B] x Height [H] (example: B=200 and H=60 mm) BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX Support span [d] (example: [d] = 1.5 m) BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY 8 BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING ASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX
CTA (Kg/m)
Def (mm)
Selection process:
a) Calculate [F] = [Qmin] x [d] b) Go to the corresponding SWL table3 on the top part with the variable [B]. c) All of the supports with a cell value greater than the [F] calculated in section a are valid. d) If the cable conduction systems supports are fixed to the wall, the calculation ends here.
In the example shown, the calculation should be done as follows: [B] = 200 (The cable tray chosen in the previous section was 200x60) [F] = [Qmin] x [d] = 26 (kg/m) x 1.5 (m) = 39 Consulting the table: BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX SWL (kg) WALL AND CURVED WALL BASORPLAST BASORCANAL BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOXSUPPORTS B BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX PRODUCT 50 100 150 200 300 400 500 600 700 800 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY SHO BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING 85 75 100 70 BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV SCR 70 70 70 70 70 70 70 60 60 BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL SRB 60 60 60 60 60 60 60 BASORTUB BASORFLEX BASORTRUNKING BASOR -BASORTRAY60 BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL WALL BRACKET SR BASORTRAV BASORSUPPORT -INOX BASORPLAST- BASORCANAL BASORTUB BASORFLEX 120 110 100 80 BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL
LIGHT LOADS
1000
Therefore, we may conclude that any type of BASORs supports (all of the values of column B=200 are higher than the Qmin) would be valid for the solution we are seeking in this case, including those which are cheaper such as SHO or SCR. Should you have chosen a [d] = 1.9 m, the [F] = 50 kg, and therefore both models would have also been valid. Output data: Support for each cable conduction system: PRODUCT + Model [B]. Example: SHO or SCR both of 200.
Should any obstacles need to be avoided and therefore a wider support is needed, this [B] shall be considered, and not that of the cable base. That is to say that, if in order to avoid a pillar the support needs to have a dimension of 300 even though the cable tray is only 200, the design should consider [B]=300. 3 SCM/CARBON STEELS (Page 80) SCM/STAINLESS (Page 124) SCE (Page 136)
1
A) Selection process when there are cable conductions only on one side of the pendant:
a) Calculate [Feq] = Addition of all Forces. [Ftot] =
Fi
i
b) Calculate [Beq] = Maximum of all of the cable tray models. [Beq] = max (Bi) c) Consult values in the corresponding pendant selection table4 introducing variable [B]. d) All of the supports with a cell value greater than the [Ftot] calculated in section a are valid. a. In the example which we are using, if we suppose that, apart from the cable conduction system with which we were working previously, we also have a second cable conduction system working on the same side of the pendant with [F2] = 85 Kg y [B2] = 300, the result shall be: [Feq] = 39 + 85 = 124 Kg [Beq] = max (200;300) = 300 Therefore, when consulting the ceiling supports table for SCM/CARBON STEELS:
SCM/CARBON STEELS - Page 84 SCM/STAINLESS - Page 106 SCP - Page 124 SCE - Page 136
SZ
CARGAS MEDIAS
SOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX SWL (kg) CEILING SUPPORT BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL B Horizontal support or width of the cable tray PRODUCT 50 100 200 300 400 600 700 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY150 BASORFIL BASORTRAV 500 BASORSUPPORT 800 Pgina INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV SHOT BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB -BASORFLEX BASORTRUNKING BASOR BASORTRAY xxx 38 55 45 40 ASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING SOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL SHO 400 85 69 58 50 39 xxx BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY SVO + 2 VR8 270 220 200 160 130 110 ASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST- BASORCANAL BASORTUB BASORFLEX BASORTRUNKING xxx SOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR 144 BASORTRAY113 BASORFIL BASORTRAV 64 BASORSUPPORT INOX xxx PC + WALL BRACKET (SR) 127 102 85 73 57 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY ASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING PC + HEAD BRACKET (SCR) 120 100 86 67 55 46 40 SOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT 150 INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX xxx BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV xxx SPL 304 254 218 192 154 128 110 96 BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY ASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING SOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX SP 404 351 310 230 196 171 151 xxx In this case the SVO is ruled out because the cable trays have differents widths. 277 In conclusion the necessary pendant support for assembly will be the SPL. The horizontal supports of each line have been fixed at the pendant.
LIGHT LOADS
429 375 333 300 250 214 188 167 xxx
10
SPD
614
550
498
455
388
338
300
269
244
223
xxx
DIMENSIONS OF CABLE TRAYS AND SUPPORTS B) Selection process when there are cable conductions on both sides of the pendant:
a) Calculate [Ftot] = Addition of all Forces. [Ftot] =
Fi
i
b) Calculate [Mright] = Addition of all momentums on right side. Biright + 50 Firight x [Mright] = 2000 i
c) Calculate [Mleft] = Addition of all momentums on left side. Bileft + 50 Fileft x [Mleft] = 2000 i
d) Calculate [Meq] = Equivalent momentum = [Mder] [Mleft]. e) Consult the Safe Area Graphs (ZS) for each pendant5 and check if they are within the [Ftot, Meq] safe area. In order to complete the abovementioned example, we shall suppose that, apart from the two cable conduction systems mentioned previously, there is a third one located opposite the two first systems, from which we know that [B3] = 400, [F] = 60 Kg. LEFT
P3 = 60 kg B3 = 400 mm
RIGHT
F1 = 39 kg B1 = 200 mm F2 = 85 kg B2 = 300 mm
Taking this data into account, the calculation would be as follows: [Ftot] = [F1] + [F2] + [F3] = 39 + 85 + 60 = 184 Kg
[Meq] = 19,89 13.5 = 6,26 kgm And, if we check with the Safe Area Graph, we shall be able to verify that the SPL support is also suitable. BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB SPL 35 BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV SPL 300: Cd=0,255 BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEXCd=0,287 30 SPL 400: BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX SPL 500: Cd=0,351 SPL 600: Cd=0,415 BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL 25 SPL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL800: Cd=0,639 BASORSUPPORT BASORTRAV INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL 20 BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL 15 ZS BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST 10 BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB kgm Ftot = 184 kg, Meq = 6,26 BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR5 BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT 0 INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL 0 50 100 150 200 250 300 350 400 450 500 BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL (kg) BASORTUB BASORFLEX BASORTRUNKING BASOR Q BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR know that a model 600 is needed, by applyingBASORSUPPORT INOX BASORPLAST BASORCANALcan Moreover, if we already BASORTRAY BASORFIL BASORTRAV the deflection coefficient (Dc), the vertical elements deflection BASORTUB be calculated: BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT INOX BASORPLAST[Meq] x [Cd] = 6,26 x 0,351 = 2,20BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL Deflection = BASORCANAL BASORTUB 3 mm. BASORTRAV BASORSUPPORT INOX BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR
5
[Mright] = [F1 x (B1+50)/2000] + [F2 x (B2+50)/2000] = 4,88 + 14,88 = 19,76 Kgm [Mleft] = [F3 x (B3+50)/2000] = 13,5 Kgm
M (kgxm)
11
SCM
BASORTRAV
FE Cable ladder British Standard Ladder (BSL)
BASORSUPPORT
Wall and curved wall supports Ceiling supports Floor supports
BASORTRAV
SCP
BASORSUPPORT
SCP supports
12 INDEX
SCE SBT
BASORFLEX
CEP ACC
SOLAR FIRE
171-180
181-188 INDEX 13
12
8 7 13
2 6
10
1. ER Cable tray 2. ERE Cable tray 3. FRE Cable tray 4. ERE Cover 5. CPERC Horizontal bend 6. CCERC Vertical inside 7. CXERC Vertical outside 8. CREC Cross Intersection 9. TERC T Intersection 10. PS Divider profile 11. AS Accessory 12. JUER-A Articulation joint 13. REER Reduction
SCM
ER Assemblies ERE
...............................................
...................................................................................
...........................
............................................
........................................................................................
BS Accessories BS Assemblies U
.............................................
..................................................
............................................................................................
OME
.................................................................................
..................................
...................................
BASORTRAY is our range of metallic cable trays. The main feature of these products is the high resistance to bending/cost of the smaller models. Its BASORs broadest range, as with its 6 models it covers all need from the most basic ones to those demanded by petrochemical companies.
GS / GC
SCM
ER
BASORTRAY
Metallic Cable Trays
11. Longitudinal reinforcements to improve Resistance to flexure. 22. Security edge to avoid accidents during set-up. 33. Corners finished at 45 to improve behaviour to flexure. 44. Pressure-fixed covers. No accessories required.
ER P+SBC+VR8
ER P+SCR50
ER50 P+COVER+2SBC+SBL+VR8
16 SCM ER
SCM
ER
BASORTRAY
Metallic Cable Trays
To assemble the cable trays, one JUER 50 must be used with reference number 2/2051 in GS or 2/5056 in GC. Each piece requires the use of 4 bolts reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100). For more technical information, please consult page 211.
L=3m
37,5
When cutting on site is necessary to drill the base or depth to fix the union. For more technical information, please consult page 211.
L=3m
7x7 18x7.5
ER 50 COVER
DESCRIPTION ER 50 COVER UVM m 3 UVE m 36 B mm 50 GS REF. 2/1311 kg/m 0,33 REF. 2/1320 GC kg/m 0,43
15
L=3m
B+3
ER 50 HORIZONTAL BEND
DESCRIPTION CURVA CPER 50x50 GS UVM ud 1 UVE ud 1 B mm 50 H mm 50 GS REF. 2/3235 kg/ud 0,26
H 12x8
To assemble the horizontal bend, one JUER 50 must be used with reference number 2/2051 in GS or 2/5056 in GC. Each piece requires the use of 4 bolts reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100).
50
B 120
SCM ER 17
21
50
To assemble the cable trays, one JUER 50 must be used with reference number 2/2051 in GS or 2/5056 in GC. Each piece requires the use of 4 bolts reference number 2/4356 in GS or 2/6826 in GC (products packed in bags 100).
50
SCM
ER
BASORTRAY
Accessories
ER 50 VERTICAL INSIDE
DESCRIPTION BEND CCER 50x50 UVM ud 1 UVE ud 1 B mm 50 H mm 50 GS
114
REF. 2/3236
kg/ud 0,27
12x8
To assemble the vertical inside, one JUER 50 must be used with reference number 2/2051 in GS or 2/5056 in GC. Each piece requires the use of 4 bolts reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100).
21
50 114
ER 50 VERTICAL OUTSIDE
DESCRIPTION BEND CXER 50x50 UVM ud 1 UVE ud 1 B mm 50 H mm 50 GS REF. 2/3238 kg/ud 0,24
125
12x8
To assemble the vertical outside, one JUER 50 must be used with reference number 2/2051 in GS or 2/5056 in GC. Each piece requires the use of 4 bolts reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100).
50
21 H 125
JUER 50 UNION
DESCRIPTION J/UNION JUER 50X50 UVM ud 1 UVE ud 250 B mm 50 H mm 50 GS REF. 2/2051 kg/ud 0,09 REF. 2/2056 GC kg/ud 0,01
B-2 29
To assemble the coupler, requires the use of 4 bolts reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100).
12x8 20
9 10
75
18x7.5
B1 BOLT SET
DESCRIPTION B1 bolt set M6x14 UVM ud 1 UVE ud 1 Pap Nm 6 CINCADO REF. kg/ud 2/4356 1,00 GC REF. 2/6826 kg/ud 1,00
The B1 bolt set consists of a M6x14 DIN 603 mushroom head square neck bolt and a M6 DIN 6923 flange nut with serration for a perfect fit. Used to mount all accessories BASORTRAY Series.
14
14
18 SCM ER
120
SCM
ER
BASORTRAY
Mounts
ER MOUNTS
JUER 50 COUPLER ER 50 HORIZONTAL BEND ER 50 VERTICAL INSIDE ER 50 VERTICAL OUTSIDE
ER P+SBC+VR8
ER P+SCR50
ER50 P+TAPA+2SBC+SBL+VR8
SCR - Page 81
SCM ER 19
SCM
ERE
BASORTRAY
Metallic Cable Trays
P
2
PATENTED 9800892
1. 1 SELF-ASSEMBLY fixation system between cable trays. No couplers needed Easier to install Less time required for installation Union with higher degree of rigidity 2. 2 Longitudinal reinforcements to improve Resistance to flexure. 3. 3 Security edge to avoid accidents during set-up. 4. 4 Corners finished at 45 to improve behaviour to flexure. 5. 5 Pressure-fixed covers. No accessories required.
6 Accessories with circular insides to avoid damaging the cables. 6.
6
USEFUL AREA (cm2) B (mm) 100 150 200 300 400 500 600 H35 34 51 69 103 H60 59 89 119 178 238 298 358 H80 78 118 158 238 317 397 477 H100 98 148 198 298 397 497 597
20 SCM ERE
SCM
ERE
BASORTRAY
Metallic Cable Trays
UVM m 3 3 3 3
UVE m 30 24 18 12
H mm 35 35 35 35
GS REF. 2/1192 2/1193 2/1194 2/1195 kg/m 0,74 0,95 1,12 1,64 REF. 2/1222 2/1223 2/1224 2/1225
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts (6 in the case of model 300), with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, JUER H35 couplers, with reference number 2/2047 in GS or 2/2052 in GC, must be used. For more technical information, please consult page 211.
GS
GC
L=3m
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts (6 in the case of model 300), with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, JUER H35 couplers, with reference number 2/2047 in GS or 2/2052 in GC, must be used. For more technical information, please consult page 211.
H 7.5x7.5 20x7.5
10x7.5
20x7.5
L=3m
7.5x7.5
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts, with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, JUER H60 couplers, with reference number 2/2048 in GS or 2/2053 in GC, must be used. For more technical information, please consult page 211.
SCM ERE 21
SCM
ERE
BASORTRAY
Metallic Cable Trays
L=3m
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts, with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, JUER H60 couplers, with reference number 2/2048 in GS or 2/2053 in GC, must be used. For more technical information, please consult page 211.
L=3m
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts, with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, JUER H80 couplers, with reference number 2/2049 in GS or 2/2054 in GC, must be used. For more technical information, please consult page 211.
L=3m
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts, with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, JUER H80 couplers, with reference number 2/2049 in GS or 2/2054 in GC, must be used. For more technical information, please consult page 211.
22 SCM ERE
SCM
ERE
BASORTRAY
Metallic Cable Trays
L=3m
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts, with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, JUER H100 couplers, with reference number 2/2050 in GS or 2/2055 in GC, must be used. For more technical information, please consult page 211.
L=3m
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts, with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, JUER H100 couplers, with reference number 2/2050 in GS or 2/2055 in GC, must be used. For more technical information, please consult page 211.
L=3m (400/500/600 - L = 2 m)
To mount the cover no accessories are needed. Fixed by pressure. The covers are self-assembly to improve its degrees of protection (IP code)
SCM ERE 23
SCM
BASORTRAY
Accessories
ERE-FRE
GS
GC
R10 0
60
37,5
The horizontal bend can be mounted either from the plug part or from the non-plug part. If mounted from the non-plug part is necessary to use two joints JUER of the corresponding height. In both cases, it requires the use of 4 bolts reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100). The height 35 does not have holes in the sides. It joins at the base.
0 R1
B+2
B+160
SCM
BASORTRAY
Accessories
ERE-FRE
R1 3
H+161 37,5
The vertical inside can be mounted either from the plug part or from the non-plug part. If mounted from the non-plug part is necessary to use two joints JUER of the corresponding height. In both cases, it requires the use of 4 bolts reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100). The height 35 does not have holes in the sides. It joins at the base.
18x7.5
15
B+2
SCM
BASORTRAY
Accessories
UVM ud 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 UVE ud 6 6 6 4 4 4 4 2 2 2 2 4 4 4 2 2 2 2 4 4 4 2 2 2 2 B mm 100 150 200 300 100 150 200 300 400 500 600 100 150 200 300 400 500 600 100 150 200 300 400 500 600 H mm 35 35 35 35 60 60 60 60 60 60 60 80 80 80 80 80 80 80 100 100 100 100 100 100 100 GS REF. 2/1565 2/1566 2/1567 2/1568 2/1572 2/1573 2/1574 2/1576 2/1577 2/1578 2/1579 2/1580 2/1581 2/1582 2/1584 2/1585 2/1586 2/1587 2/1588 2/1589 2/1590 2/1592 2/1593 2/1594 2/1595 kg/ud 0,32 0,42 0,51 0,70 0,45 0,54 0,64 0,82 1,01 1,20 1,39 0,58 0,67 0,77 0,96 1,14 1,33 1,52 0,67 0,77 0,86 1,05 1,24 1,43 1,62 REF. 2/1596 2/1597 2/1598 2/1599 2/1603 2/1604 2/1605 2/1607 2/1608 2/1609 2/1610 2/1611 2/1612 2/1613 2/1615 2/1616 2/1617 2/1618 2/1619 2/1620 2/1621 2/1623 2/1624 2/1625 2/1626 GC kg/ud 0,37 0,48 0,58 0,80 0,51 0,62 0,72 0,94 1,15 1,37 1,58 0,66 0,77 0,88 1,09 1,31 1,52 1,73 0,77 0,88 0,98 1,20 1,41 1,63 1,93
H 12x8 18x7.5 B
ERE-FRE
The vertical outside can be mounted either from the plug part or from the non-plug part. If mounted from the non-plug part is necessary to use two joints JUER of the corresponding height. In both cases, it requires the use of 4 bolts reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100). The height 35 does not have holes in the sides. It joins at the base.
R1
35
B+2
37
174
R1 14
SCM
BASORTRAY
Accessories
ERE-FRE
TERC INTERSECTION
DESCRIPTION TERC 100x35 TERC 150x35 TERC 200x35 TERC 300x35 TERC 100x60 TERC 150x60 TERC 200x60 TERC 300x60 TERC 400x60 TERC 500x60 TERC 600x60 TERC 100x80 TERC 150x80 TERC 200x80 TERC 300x80 TERC 400x80 TERC 500x80 TERC 600x80 TERC 100x100 TERC 150x100 TERC 200x100 TERC 300x100 TERC 400x100 TERC 500x100 TERC 600x100 UVM ud 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 UVE ud 4 4 4 4 4 4 4 4 4 2 2 4 4 4 4 4 2 2 4 4 4 4 4 2 2 B mm 100 150 200 300 100 150 200 300 400 500 600 100 150 200 300 400 500 600 100 150 200 300 400 500 600 H mm 35 35 35 35 60 60 60 60 60 60 60 80 80 80 80 80 80 80 100 100 100 100 100 100 100 REF. 2/1751 2/1752 2/1753 2/1754 2/1758 2/1759 2/1760 2/1762 2/1763 2/1764 2/1765 2/1766 2/1767 2/1768 2/1770 2/1771 2/1772 2/1773 2/1774 2/1775 2/1776 2/1778 2/1779 2/1780 2/1781 kg/ud 0,81 1,11 1,58 2,26 0,96 1,27 1,74 2,44 3,41 4,54 5,83 1,07 1,38 1,86 2,57 3,55 4,70 5,99 1,19 1,51 2,00 2,71 3,71 4,87 6,18 REF. 2/1782 2/1783 2/1784 2/1785 2/1789 2/1790 2/1791 2/1793 2/1794 2/1795 2/1796 2/1797 2/1798 2/1799 2/1801 2/1802 2/1803 2/1804 2/1805 2/1806 2/1807 2/1809 2/1810 2/1811 2/1812 kg/ud 0,93 1,27 1,80 2,57 1,09 1,45 1,98 2,78 3,89 5,18 6,64 1,22 1,58 2,12 2,93 4,05 5,35 6,83 1,36 1,72 2,28 3,09 4,23 5,55 7,04
12x8 H 18x7.5 B+160 B
GS
GC
R100
B B+320
60
The T intersection can be mounted either from the plug part or from the non-plug part. If mounted from the non-plug part is necessary to use four joints JUER of the corresponding height. In both cases, it requires the use of 8 bolts reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100). The height 35 does not have holes in the sides. It joins at the base.
GS
GC
60
00
B+2 B+320
SCM
BASORTRAY
Accessories
ERE-FRE
CRERC INTERSECTION
DESCRIPTION CRERC 100x35 CRERC 150x35 CRERC 200x35 CRERC 300x35 CRERC 100x60 CRERC 150x60 CRERC 200x60 CRERC 300x60 CRERC 400x60 CRERC 500x60 CRERC 600x60 CRERC 100x80 CRERC 150x80 CRERC 200x80 CRERC 300x80 CRERC 400x80 CRERC 500x80 CRERC 600x80 CRERC 100x100 CRERC 150x100 CRERC 200x100 CRERC 300x100 CRERC 400x100 CRERC 500x100 CRERC 600x100 UVM ud 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 UVE ud 4 4 4 4 4 4 4 4 4 2 2 4 4 4 4 4 2 2 4 4 4 4 4 2 2 B mm 100 150 200 300 100 150 200 300 400 500 600 100 150 200 300 400 500 600 100 150 200 300 400 500 600 H mm 35 35 35 35 60 60 60 60 60 60 60 80 80 80 80 80 80 80 100 100 100 100 100 100 100 GS REF. 2/1866 2/1867 2/1868 2/1869 2/1873 2/1874 2/1875 2/1877 2/1878 2/1879 2/1872 2/1881 2/1882 2/1883 2/1885 2/1886 2/1887 2/1880 2/1889 2/1890 2/1891 2/1893 2/1894 2/1895 2/1896 kg/ud 1,02 1,37 1,76 2,65 1,19 1,54 1,92 2,82 3,87 5,08 6,28 1,31 1,66 2,05 2,94 4,00 5,21 6,45 1,45 1,80 2,19 3,08 4,14 5,34 6,71 REF. 2/1897 2/1898 2/1899 2/1900 2/1904 2/1905 2/1906 2/1908 2/1909 2/1910 2/1911 2/1912 2/1913 2/1914 2/1916 2/1917 2/1918 2/1919 2/1920 2/1921 2/1922 2/1924 2/1925 2/1926 2/1927 GC kg/ud 1,16 1,56 2,00 3,02 1,35 1,75 2,19 3,21 4,41 5,79 7,35 1,50 1,89 2,34 3,36 4,56 5,93 7,49 1,65 2,05 2,49 3,51 4,71 6,09 7,65
12x8 H
R10
60
0
B B+320
The CRERC intersection can be mounted either from the plug part or from the non-plug part. If mounted from the non-plug part is necessary to use six joints JUER of the corresponding height. In both cases, it requires the use of 12 bolts reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100). The height 35 does not have holes in the sides. It joins at the base.
R100
B+2 B+320
B B+320
18x7.5
SCM
BASORTRAY
Accessories
ERE-FRE
AS INTERSECTION
DESCRIPTION AS 100x35 AS 150x35 AS 200x35 AS 300x35 AS 100x60 AS 150x60 AS 200x60 AS 300x60 AS 400x60 AS 500x60 AS 600x60 AS 100x80 AS 150x80 AS 200x80 AS 300x80 AS 400x80 AS 500x80 AS 600x80 AS 100x100 AS 150x100 AS 200x100 AS 300x100 AS 400x100 AS 500x100 AS 600x100 UVM ud 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 UVE ud 6 6 4 4 4 4 4 4 4 2 2 4 4 4 4 4 2 2 2 2 2 2 2 2 2 B mm 100 150 200 300 100 150 200 300 400 500 600 100 150 200 300 400 500 600 100 150 200 300 400 500 600 H mm 35 35 35 35 60 60 60 60 60 60 60 80 80 80 80 80 80 80 100 100 100 100 100 100 100 GS REF. 2/1983 2/1984 2/1985 2/1987 2/1991 2/1992 2/1993 2/1995 2/1996 2/1997 2/1998 2/1999 2/2000 2/2001 2/2003 2/2004 2/2005 2/2006 2/2007 2/2008 2/2009 2/2011 2/2012 2/2013 2/2014 kg/ud 0,40 0,47 0,54 0,68 0,48 0,55 0,63 0,77 0,91 1,05 1,19 0,55 0,62 0,69 0,83 0,97 1,11 1,25 0,61 0,69 0,76 0,90 1,04 1,18 1,32 REF. 2/2015 2/2016 2/2017 2/2019 2/2023 2/2024 2/2025 2/2027 2/2028 2/2029 2/2030 2/2031 2/2032 2/2033 2/2035 2/2036 2/2037 2/2038 2/2039 2/2040 2/2041 2/2043 2/2044 2/2045 2/2046 GC kg/ud 0,46 0,54 0,62 0,78 0,55 0,63 0,72 0,87 1,04 1,20 1,36 0,63 0,71 0,79 0,95 1,11 1,27 1,44 0,71 0,79 0,86 1,03 1,19 1,35 1,52
H 12x8 18x7.5 B B+320 14 44 18x7.5 115 7 JUER-35 JUER H35 20x8 9 H-20 20x8 9 30 110 H-20
The AS intersection can be mounted either from the plug part or from the non-plug part. If mounted from the non-plug part is necessary to use two joints JUER of the corresponding height. In both cases, it requires the use of 8 bolts reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100). The height 35 does not have holes in the sides. It joins at the base.
UVM ud 1 1 1 1
H mm 35 60 80 100
GS REF. 2/2047 2/2048 2/2049 2/2050 kg/ud 0,04 0,03 0,06 0,07 REF. 2/2052 2/2053 2/2054 2/2055
Two bolts are required to fix adjustable joint reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100).
110
JUER H60
JUER H80/H100
JUER H60
181
R10 0
60
SCM
BASORTRAY
Accessories
ERE-FRE
Two bolts are required to fix adjustable joint reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100).
H-20
JUER A H60
JUER A H80/100
138
DIVIDER PROFILE
DESCRIPTION PS 35 PS 60 PS 80 PS 100
L=3m
UVM m 3 3 3 3
UVE m 30 30 30 30
H mm 35 60 80 100
GS REF. 2/3476 2/2066 2/3477 2/3478 kg/m 0,23 0,34 0,46 0,56 REF. 2/3479 2/3480 2/3481 2/3482
20 25 25x8.5
One bolt is required to fix divider profile every 500mm reference number 2/4356 in GS or 2/6826 in GC (products packed in bags of 100).
50
60
The piece can be used for both width reduction, as of end cover. Two bolts are required to fix as reduction. For use how end cover, it needs as many bolts as pieces are joined plus one. Depending on the type of coating, bolts are needed reference 2/4356 in GS or 2/6826 in GC (products packed in bags of 100).
B1 BOLT SET
DESCRIPTION Pack 100 B1 Bolt Set M6x14 UVM ud 1 UVE ud 1 Pap Nm 6 CINCADO REF. kg/ud 2/4356 1,00 GC REF. 2/6826 kg/ud 1,00
The B1 bolt set consists of a M6x14 DIN603 mushroom head square neck bolt and a M6 DIN6923 flange nut with serration for a perfect fit. Used to mount all accessories from the BASORTRAY Series.
14
14
21
20x8
H-20
20x8
20x8
155 98
155 98
44
SCM
ERE
BASORTRAY
Mounts
MOUNTS ERE
SELF-ASSEMBLY ERE ERE + COVER ERE + CPERC ERE + CXERC
ERE + AS INTERSECTION
ERE + JUER-A
ERE + REDUCTION
SCM ERE 31
SCM
FRE
BASORTRAY
Metallic Cable Trays
PATENTED 9800892
No couplers needed Easier to install Less time required for installation Union with higher degree of rigidity
2 Longitudinal reinforcements to improve Resistance to flexure. 2. 3 Inside lip which confers it a greater resistance to flexure. 3. 4 Corners finished at 45 to improve behaviour to flexure. 4.
5. 5 Pressure-fixed covers. No accessories required. 6. 6 Accessories with circular insides to avoid damaging the cables.
USEFUL AREA (cm2) B (mm) 100 150 200 300 400 500 600 H35 34 51 69 103 H60 59 89 119 178 238 298 358 H80 78 118 158 238 317 397 477 H100 148 198 298 397 497 597
32 SCM FRE
SCM
FRE
BASORTRAY
Metallic High Load Cable Trays
UVM m 3 3 3 3
UVE m 12 12 12 6
H mm 35 35 35 35
e d=2m mm SWL (kg/m) 1,5 120 1,5 120 1,5 120 1,5 120
GS REF. 2/0001 2/0002 2/0003 2/0004 kg/m 1,68 2,15 2,51 3,35 REF. 2/0051 2/0052 2/0053 2/0054
16 H 10x7.5 20x7.5
16 B 10x7.5 H 7.5x7.5 20x7.5
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts (6 in the case of model 300), with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, couplers for cable trays with sides of 35, with reference number 2/2047 in GS or 2/2052 in GC, must be used. The accessories for FRE cable trays are the same as the ones used for ERE cable trays (page 24). For more technical information, please consult page 211.
L=3m
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts, with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, couplers for cable trays with sides of 60, with reference number 2/2048 in GS or 2/2053 in GC, must be used. The accessories for FRE cable trays are the same as the ones used for ERE cable trays (page 24). For more technical information, please consult page 211.
L=3m
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts, with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, couplers for cable trays with sides of 80, with reference number 2/2049 in GS or 2/2054 in GC, must be used. The accessories for FRE cable trays are the same as the ones used for ERE cable trays (page 24). For more technical information, please consult page 211.
SCM FRE 33
SCM
FRE
BASORTRAY
Metallic High Load Cable Trays
L=3m
To assemble the cable trays, no couplers are needed. Each stretch requires the use of 4 bolts, with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, couplers for cable trays with sides of 100, with reference number 2/2050 in GS or 2/2055 in GC, must be used. The accessories for FRE cable trays are the same as the ones used for ERE cable trays (page 24). For more technical information, please consult page 211.
UVM m 3 3 3 2 2
UVE m 6 6 6 4 4
To mount the cover no accessories are needed. Fixed by pressure. The covers are self-assembly to improve its degrees of protection (IP code)
B1 BOLT SET
DESCRIPTION Pack 100 B1 Bolt Set M6x14 UVM ud 1 UVE ud 1 Pap Nm 6 CINCADO REF. kg/ud 2/4356 1,00 GC REF. 2/6826 kg/ud 1,00
The B1 bolt set consists of a M6x14 DIN603 mushroom head square neck bolt and a M6 DIN6923 flange nut with serration for a perfect fit. Used to mount all accessories BASORTRAY Series.
14
14
ACCESSORIES ERE/FRE
CPERC
CPERC COVER
CCERC
CCERC COVER
CXERC
CXERC COVER
TERC
TERC COVER
CRERC
CRERC COVER
AS
JUER
PS
REER
34 SCM FRE
15
GS
SCM
FRE
BASORTRAY
Mounts
MOUNTS FRE
SELF-ASSEMBLY FRE FRE + COVER FRE + CPERC FRE + CXERC
FRE + AS INTERSECTION
FRE + JUER-A
FRE + REDUCTION
SCM FRE 35
SCM
BS
BASORTRAY
Metallic High Load Cable Trays
1 Side perforations to improve the tethering of the cables. 1. 2 Security edge to avoid accidents. 2. 3 Bidirectional perforating system to make the fixation of the cables easier. 3. 4 The thickness varies depending on the model to adapt the resistance to flexure to the cables capacity. 4. 5 The cover is fixed using an additional piece. 5.
USEFUL AREA (cm2) B(mm) 75 100 150 225 300 450 600 H50 34 46 70 106 143 215 284
SCM
BS
BASORTRAY
Metallic High Load Cable Tray / Accessories
UVM
UVE
d=2m
GS
GC
To assemble the cable trays, 2 outside couplers (reference number 2/3801 in GS or 2/3996 in GC) or 2 inside couplers (2/3800 in GS or 2/3995 in GC) and 8 bolts with reference number 2/4356 in GS or 2/6826 in GC are needed per piece (products packed in bags of 100). For more technical information, please consult page 211.
Horizontal bends need no couplers to attach them to the cable trays, as they can be attached by way of the projection located in the base of the bend. Each bend requires 4 bolts with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units).
Vertical insides need no couplers to attach them to the cable trays, as they can be attached by way of the projection located in the base of the bend. Each bend requires 4 bolts with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units).
Vertical outsides need no couplers to attach them to the cable trays, as they can be attached by way of the projection located in the base of the bend. Each bend requires 4 bolts with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units).
SCM
BS
BASORTRAY
Accessories
TEBS INTERSECTION
DESCRIPTION TEBS 75x50 TEBS 100x50 TEBS 150x50 TEBS 225x50 TEBS 300x50 TEBS 450x50 TEBS 600x50 UVM ud 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 B mm 75 100 150 225 300 450 600 H mm 50 50 50 50 50 50 50 REF. 2/3829 2/3830 2/3831 2/3832 2/3833 2/3834 2/3835 kg/ud 0,40 0,44 0,67 1,27 1,87 3,37 5,30 REF. 2/4024 2/4025 2/4026 2/4027 2/4028 2/4029 2/4030 kg/ud 0,45 0,51 0,76 1,43 2,09 3,71 5,70
B 50 H 18x7.5 B 60 50 18x7.5 B 37 54 18x7.5 18x7.5 40 25 200
GS
GC
TEBS intersections need no couplers to attach them to the cable trays, as they can be attached by way of the projection located in the base of the bend. Each bend requires 8 bolts with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units).
CRBS INTERSECTION
DESCRIPTION CRBS 75x50 CRBS 100x50 CRBS 150x50 CRBS 225x50 CRBS 300x50 CRBS 450x50 CRBS 600x50 UVM ud 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 B mm 75 100 150 225 300 450 600 H mm 50 50 50 50 50 50 50 REF. 2/3838 2/3839 2/3840 2/3841 2/3842 2/3843 2/3844 kg/ud 0,47 0,58 0,84 1,52 2,14 3,72 5,38 REF. 2/4033 2/4034 2/4035 2/4036 2/4037 2/4038 2/4039 kg/ud 0,54 0,66 0,96 0,18 0,26 4,10 5,78
H
GS
GC
CRBS intersections need no couplers to attach them to the cable trays, as they can be attached by way of the projection located in the base of the bend. Each bend requires 4 bolts with reference number 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units).
OUTSIDE JOINT BS
DESCRIPTION JU Exterior BS Alt. 50 UVM ud 1 UVE ud 1 H mm 50 GS REF. 2/3801 kg/ud 0,24 REF. 2/3996 GC kg/ud 0,27
The union is used to mount trays BS. Each piece requires 4 bolts reference 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units).
217
The union is used to mount trays BS. Each piece requires 4 bolts reference 2/4356 in GS or 2/6826 in GC (products packed in bags containing 100 units).
B1 BOLT SET
DESCRIPTION Pack 100 B1 Bolt set M6x14 UVM ud 1 UVE ud 1 Pap Nm 6 CINCADO REF. kg/ud 2/4356 1,00 GC REF. 2/6826 kg/ud 1,00
The B1 bolt set consists of a M6x14 DIN603 mushroom head square neck bolt and a M6 DIN6923 flange nut with serration for a perfect fit. Used to mount all accessories BASORTRAY Series.
14
14
60
SCM
BS
BASORTRAY
Mounts
MOUNTS BS
OUTSIDE JOINT BS INSIDE JOINT PLATE BS CPBS HORIZONTAL BEND CCBS VERTICAL INSIDE
TEBS INTERSECTION
SCM
U
BASORTRAY
Metallic High Load Cable Trays
1 1. Bidirectional perforating system to make the fixation of the cables easier. 2 2. Thickness of 1.5, 2 or 2.5mm in order to ensure a good resistance to flexure and a high degree of
USEFUL AREA (cm2) U e = 2 mm B(mm) 50 100 150 200 300 400 500 600 H20 8 17 26 35 53 H30 13 27 41 55 83 H50 22 46 70 94 142 190 238 286
*For thicknesses which are not displayed in the catalogue, please contact our commercial department.
40 SCM U
SCM
U
BASORTRAY
Metallic High Load Cable Trays
m 2 2 2 2 2
m 2 2 2 2 2
mm 15 15 15 15 15
mm 2 2 2 2 2
SWL (kg/m) 20 20 20 20 20
To assemble the cable trays, 2 outside JUE H12 joint reference 2/3186 in GC and 4 bolts reference 2/6826 in GC are needed per piece (products packed in bags of 100). For more technical information, please consult page 211.
UVE m 3 3 3 3 3
H mm 30 30 30 30 30
e mm 2 2 2 2 2
GC (kg/m) 1,67 2,36 3,05 3,74 5,12 2/0577 2/0578 2/0579 2/0580 2/0581
m 3 3 3 3 3
To assemble the cable trays, 2 outside JUE H25 joint reference 2/3187 in GC and 4 bolts reference 2/6826 in GC are needed per piece (products packed in bags of 100). For more technical information, please consult page 211.
UVE m 3 3 3 3 3 3 3 3
H mm 50 50 50 50 50 50 50 50
e mm 2 2 2 2 2 2 2 2
d=2m SWL (kg/m) 100 100 100 100 100 100 100 100 REF.
GC (kg/m) 2,36 3,05 3,74 4,43 5,81 7,28 8,66 10,04 2/0585 2/0586 2/0587 2/0588 2/0589 2/0590 2/0591 2/0592
m 3 3 3 3 3 3 3 3
To assemble the cable trays, 2 outside JUE H45 joint reference 2/3655 in GC and 4 bolts reference 2/6826 in GC are needed per piece (products packed in bags of 100). For more technical information, please consult page 211.
SCM U 41
UVM
UVE
d=1,5m
GC
SCM
OME
BASORTRAY
Metallic High Load Cable Trays
2. 2 Thickness of 1.5, 2 or 2.5mm in order to ensure a good resistance to flexure and a high degree of durability for the most adverse needs*.
3 The cover is fixed using an additional piece. 3.
USEFUL AREA (cm2) B(mm) 50 100 150 200 300 400 500 600 H20 8 17 25 34 52 H30 12 26 40 54 81 H50 21 45 69 93 140 188 235 283
*For thicknesses which are not displayed in the catalogue, please contact our commercial department.
42 SCM OMEGA
SCM
OME
BASORTRAY
Metallic High Load Cable Trays
UVE m 3 3 3 3 3
H mm 20 20 20 20 20
e mm 2 2 2 2 2
GC 2/0405 2/0406 2/0407 2/0408 2/0409 1,64 2,32 2,99 3,67 5,03
25 B 18x7.5 25
e
3 3 3 3 3
To assemble the cable trays, 2 outside JUE H12 joint reference 2/3186 in GC and 4 bolts reference 2/6826 in GC are needed per piece (products packed in bags of 100). For more technical information, please consult page 211.
UVE m 2 3 3 3 3
H mm 30 30 30 30 30
e mm 2 2 2 2 2
GC (kg/m) 1,98 2,65 3,33 4,00 5,37 2/0413 2/0414 2/5977 2/0416 2/0417
m 2 3 3 3 3
B 25 18x7.5 25
e
To assemble the cable trays, 2 outside JUE H25 joint reference 2/3187 in GC and 4 bolts reference 2/6826 in GC are needed per piece (products packed in bags of 100). For more technical information, please consult page 211.
UVE m 3 3 3 3 3 3 3 3
H mm 50 50 50 50 50 50 50 50
e mm 2 2 2 2 2 2 2 2
d=2m SWL (kg/m) 150 150 150 150 150 150 150 150 REF.
m 3 3 3 3 3 3 3 3
To assemble the cable trays, 2 outside JUE H45 joint reference 2/3655 in GC and 4 bolts reference 2/6826 in GC are needed per piece (products packed in bags of 100). For more technical information, please consult page 211.
SCM OMEGA 43
(kg/m)
SCM
OME
BASORTRAY
Metallic High Load Cable Trays
UVE m 2 2 2 2 2
H mm 20 20 20 20 20
GC 2/0446 2/0447 2/0448 2/0449 2/0450 1,98 2,81 3,64 4,46 6,12
25 B 18x7.5 25
e
2 2 2 2 2
To assemble the cable trays, 2 outside JUE H12 joint reference 2/3186 in GC and 4 bolts reference 2/6826 in GC are needed per piece (products packed in bags of 100). For more technical information, please consult page 211.
UVE m 2 2 2 2 2
H mm 30 30 30 30 30
GC (kg/m) 2,39 3,22 4,05 4,88 6,53 2/0454 2/0455 2/0456 2/0457 2/0458
m 2 2 2 2 2
B 25 18x7.5 25
e
To assemble the cable trays, 2 outside JUE H25 joint reference 2/3187 in GC and 4 bolts reference 2/6826 in GC are needed per piece (products packed in bags of 100). For more technical information, please consult page 211.
UVE m 2 2 2 2 2 2 2 2
H mm 50 50 50 50 50 50 50 50
d=2m SWL (kg/m) 200 200 200 200 200 200 200 200 REF.
m 2 2 2 2 2 2 2 2
To assemble the cable trays, 2 outside JUE H45 joint reference 2/3655 in GC and 4 bolts reference 2/6826 in GC are needed per piece (products packed in bags of 100). For more technical information, please consult page 211.
44 SCM OMEGA
(kg/m)
SCM
BASORTRAY
Accessories
U/OME
Horizontal bends need no couplers to attach them to the cable trays, as they can be attached by way of the projection located in the base of the bend. Each bend requires 4 bolts reference number 2/6826 in GC (products packed in bags of 100).
Vertical insides need no couplers to attach them to the cable trays, as they can be attached by way of the projection located in the base of the bend. Each bend requires 4 bolts reference number 2/6826 in GC (products packed in bags of 100).
SCM
BASORTRAY
Accessories
U/OME
Vertical outsides need no couplers to attach them to the cable trays, as they can be attached by way of the projection located in the base of the bend. Each bend requires 4 bolts reference 2/6826 in GC (products packed in bags of 100).
TEU/OME INTERSECTION
UVM DESCRIPTION TE U/OMEGA 50x15 TE U/OMEGA 100x15 TE U/OMEGA 150x15 TE U/OMEGA 200x15 TE U/OMEGA 300x15 TE U/OMEGA 50x30 TE U/OMEGA 100x30 TE U/OMEGA 150x30 TE U/OMEGA 200x30 TE U/OMEGA 300x30 TE U/OMEGA 50x50 TE U/OMEGA 100x50 TE U/OMEGA 150x50 TE U/OMEGA 200x50 TE U/OMEGA 300x50 TE U/OMEGA 400x50 TE U/OMEGA 500x50 TE U/OMEGA 600x50 ud 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B mm 50 100 150 200 300 50 100 150 200 300 50 100 150 200 300 400 500 600 H mm 15 15 15 15 15 30 30 30 30 30 50 50 50 50 50 50 50 50 e mm 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 REF. 2/2789 2/2790 2/2791 2/2792 2/2793 2/2797 2/2798 2/2799 2/2800 2/2801 2/2805 2/2806 2/2807 2/2808 2/2809 2/2810 2/2811 2/2812 GC (kg/ud) 0,41 0,79 1,82 3,19 0,49 0,88 1,38 1,95 3,35 0,60 1,01 1,52 2,11 3,54 5,33 7,44 9,89
B 60 35x7.5 B 50 e H
1,27
TE intersections need no couplers to attach them to the cable trays, as they can be attached by way of the projection located in the base of the bend. Each bend requires 8 bolts reference number 2/6826 in GC (products packed in bags containing 100 units).
SCM
BASORTRAY
Accessories
U/OME
CRU/OME INTERSECTION
UVM DESCRIPTION CR U/OMEGA 50x15 CR U/OMEGA 100x15 CR U/OMEGA 150x15 CR U/OMEGA 200x15 CR U/OMEGA 300x15 CR U/OMEGA 50x30 CR U/OMEGA 100x30 CR U/OMEGA 150x30 CR U/OMEGA 200x30 CR U/OMEGA 300x30 CR U/OMEGA 50x50 CR U/OMEGA 100x50 CR U/OMEGA 150x50 CR U/OMEGA 200x50 CR U/OMEGA 300x50 CR U/OMEGA 400x50 CR U/OMEGA 500x50 CR U/OMEGA 600x50 ud 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B mm 50 100 150 200 300 50 100 150 200 300 50 100 150 200 300 400 500 600 H mm 15 15 15 15 15 30 30 30 30 30 50 50 50 50 50 50 50 50 e mm 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 REF. 2/2609 2/2610 2/2611 2/2612 2/2613 2/2617 2/2618 2/2619 2/2620 2/2621 2/2625 2/2626 2/2627 2/2628 2/2629 2/2630 2/2631 2/2632 GC (kg/ud) 0,53 1,07 1,61 3,68 0,62 1,07 1,61 2,25 3,77 0,73 1,19 1,73 2,37 3,89 5,74 7,94 10,48
B 60 35x7.5 B H 45 35x7 140 50 H
2,17
Cross intersections need no couplers to attach them to the cable trays, as they can be attached by way of the projection located in the base of the bend. Each bend requires 12 bolts reference number 2/6826 in GC (products packed in bags containing 100 units).
JUE JOINT
UVM DESCRIPTION Union Joint JUE H12 Union Joint JUE JUE H25 Union Joint JUE JUE H45 ud 1 1 1 UVE ud 1 1 1 H mm 12 25 45 e mm 2 2 2 REF. 2/3186 2/3187 2/3655 GC (kg/ud) 0,09 0,13 0,16
The union is used to mount cable trays BS and U. Each piece requires 2 bolts reference 2/6826 in GC (products packed in bags containing 100 units).
B1 BOLT SET
DESCRIPTION Pack 100 B1 Bolt Set M6x14 UVM ud 1 UVE ud 1 Pap Nm 6 GC REF. 2/6826 kg/ud 1,00
The B1 bolt set consists of a M6x14 DIN603 mushroom head square neck bolt and a M6 DIN6923 flange nut with serration for a perfect fit. Used to mount all accessories BASORTRAY Series.
14
14
22
32
SCM
BASORTRAY
Mounts
U/OME
MOUNTS U/OMEGA
JUE U/OME JOINT CCU/OME VERTICAL INSIDE CXU/OME VERTICAL OUTSIDE CRU/OME CROSS INTERSECTION
2 4
5 10 1
1. High loads wire-mesh cable tray (BFR) 2. Wire-mesh cable tray (BF) 60x65 3. BASORFIL Cover 4. SL Simple support 5. BASORFIL Quick joint 6. Universal support box 7. Conduit exit (STB) 8. Multi-union joint 9. Drop-out plate 10. Central suspension (SSC)
SCM
BASORFIL is the cheapest and most versatile range of cable trays, as the installer himself can cut and turn the cable conduction systems according to his/her needs. As it doesnt have any accessories, all assemblies of this product are comfortable to perform. We recommend using this product for those assemblies which dont require a high load capacity. The finishing process of the whole BASORFIL range of products is carried out completely at BASORs facilities.
CINCADO / GC / BICRO
SCM
BFR
BASORFIL
High load wire-mesh cable trays
P
1 Optimal solution for systems which dont have high load needs. 2 Maximum ventilation and cleaning of the cables. 3 Innovative design patented by BASOR which offers:
PATENTED 200201809
Greater resistance to flexure Greater save working load Excellent aesthetic finish
4 Quicker and easier assembly.
With simple manipulation based on the way in which the rods are cut, the tray can be easily moulded, even with complicated changes in direction. The cuts have to be performed with asymmetrical-cut wire cutters. The cut has to be performed as near to the intersection of the steel wires as possible, in order to obtain a clean cut and a good assembly.
USEFUL AREA (cm2) B(mm) 60 100 150 200 300 400 500 600 H35 27 42 58 89 H65 23 47 75 102 157 212 267 322 H105 193 297 401 505 609
52 SCM BFR/BF
SCM
BFR
BASORFIL
High load wire-mesh cable trays
UVM m 3 3 3 3
UVE m 24 24 24 18
H mm 35 35 35 35
CINCADO REF. kg/m 2/3616 0,55 2/3617 0,67 2/3618 0,81 2/3619 1,27
GC REF. 2/0286 2/0287 2/0288 2/0289 kg/m 0,63 0,73 0,89 1,39
B 50 H B 50
B 50
To assemble the cable trays, it is necessary to use a bolt-staple set for each of the cable trays side, with reference number 2/4364 in CINCADO and 2/4360 in GC. For more technical information, please consult page 211.
L=3m
To assemble cable trays with a width which is lower or equal to 200 mm, its necessary to use a BF quick joint for each of the cable trays side, with reference number 2/6217 in CINCADO and 2/4360 in GC. For wider trays an aditional bolt-staple set shall be used as central union joint, reference 2/4364 in CINCADO and 2/4360 in GC. For more technical information, please consult page 211.
UVM m 3 3 3 3 3
UVE m 12 12 12 12 12
CINCADO REF. kg/m 2/4953 1,57 2/4959 1,90 2/4960 2,46 2/4961 2,83 2/6043 3,20
GC REF. 2/0298 2/0299 2/0300 2/0301 2/0302 kg/m 1,69 2,05 2,65 3,05 3,45
To assemble cable trays with a width which is lower or equal to 200 mm, its necessary to use a BF quick joint for each of the cable trays side, with reference number 2/6217 in CINCADO and 2/6219 in GC. For wider cable trays, an additional bolt-staple set shall be used as a central union joint, reference number 2/4364 in CINCADO and 2/4360 in GC. For more technical information, please consult page 211.
SCM BFR/BF 53
100
25 H
100
L=3m
100
SCM
BF
BASORFIL
Wire-Mesh Cable Trays
BASORFIL BF H35
DESCRIPTION BASORFIL BF 100X35 BASORFIL BF 150X35 BASORFIL BF 200X35 BASORFIL BF 300X35
L=3m
UVM m 3 3 3 3
UVE m 24 24 24 18
H mm 35 35 35 35
50
To assemble the cable trays, it is necessary to use a bolt-staple set for each of the cable trays side, with reference number 2/4914. For more technical information, please consult page 211.
BASORFIL BF H65
DESCRIPTION BASORFIL BF 60X65 BASORFIL BF 100X65 BASORFIL BF 150X65 BASORFIL BF 200X65 BASORFIL BF 300X65 BASORFIL BF 400X65 BASORFIL BF 500X65 BASORFIL BF 600X65 UVM m 3 3 3 3 3 3 3 3 UVE m 36 24 18 18 18 18 18 18 B mm 60 100 150 200 300 400 500 600 H mm 65 65 65 65 65 65 65 65 d=1,5 SWL (kg/m) 22 43 43 43 43 43 52 52 BICRO REF. kg/m 2/4297 0,55 2/3365 0,77 2/3366 0,82 2/3367 1,06 2/3368 1,57 2/3369 1,90 2/3370 2,46 2/3371 2,83
50 25 B 50 H 100 100
L=3m
L=3m
To assemble cable trays with a width which is lower or equal to 200 mm, its necessary to use a BF quick joint for each side of the cable trays side, reference number 2/6218. For wider cable trays, an additional bolt-staple set may be required as a central union joint reference number 2/4914. For more technical information, please consult page 211.
BASORFIL BF H105
DESCRIPTION BASORFIL BF 200X105 BASORFIL BF 300X105 BASORFIL BF 400X105 BASORFIL BF 500X105 BASORFIL BF 600X105 UVM m 3 3 3 3 3 UVE m 12 12 12 12 12 B mm 200 300 400 500 600 H mm 105 105 105 105 105 d=1,5 SWL (kg/m) 57 57 67 67 67 BICRO REF. 2/3372 2/5647 2/3373 2/5859 2/3374 kg/m 1,57 1,90 2,46 2,83 3,20
25 H
L=3m
To assemble cable trays with a width which is lower or equal to 200 mm, its necessary to use a BF quick joint for each side of the cable trays side, reference number 2/6218. For wider cable trays, an additional bolt-staple set may be required as a central union joint reference number 2/4914. For more technical information, please consult page 211.
L=3m (400/500/600 - L = 2 m)
ERE covers are used to cover all BASORFIL trays. To mount the cover no accessories are needed. Fixed by pressure. Available in GS and GC finishes only.
54 SCM BFR/BF
100
BICRO
SCM
BASORFIL
Fasteners
BFR/BF
DIVIDER PROFILE
DESCRIPTION PS 35 PS 60 PS 80 PS 100
L=3m
UVM m 3 3 3 3
UVE m 30 30 30 30
H mm 35 60 80 100
GS REF. 2/3476 2/2066 2/3477 2/3478 kg/m 0,23 0,34 0,46 0,56 REF. 2/3479 2/3480 2/3481 2/3482
One bolt is required to fix divider profile every 500mm. BASORFIL staple and B1 bolt set is required. B1 bolt set reference number 2/4356 in CINCADO or 2/6826 in GC (products packed in bags of 100). BASORFIL staple reference number 2/0337 in CINCADO or 2/0339 in GC.
QUICK JOINT
DESCRIPTION BASORFIL Quick Joint UVM ud 50 UVE ud 200 CINCADO REF. kg/ud 2/6217 0,03 BICRO REF. kg/ud 2/6218 0,03 GC REF. 2/6219 kg/ud 0,03
25 52 12 52 6 28 76 18 20
Used as a fastener for BASORFIL trays, H60 and H105. Simple and fast to assemble for a perfect fit tighten the tabs with pliers.
BOLT-STAPLE SET
DESCRIPTION BF Bolt-Staple Set UVM ud 100 UVE ud 100 CINCADO REF. kg/ud 2/4364 0,03 BICRO REF. kg/ud 2/4914 0,03 GC REF. 2/4360 kg/ud 0,03
It consists of a BF-bolt set and a BF-staple. It can be used as a fastener in all BASORFIL tray series.
50
It consists of a bolt-BF set and a lateral union. It can be used as a fastener with the BFH65 and BFH105 series. Of all the fasteners, this holds the tray the most rigid.
SCM BFR/BF 55
34
SCM
BASORFIL
Fasteners- Accessories
BFR/BF
BF BOLT-NUT SET
DESCRIPTION BF Bolt-Nut Set UVM ud 100 UVE ud 100 Pap Nm 6 CINCADO REF. kg/ud 2/4362 0,02 BICRO REF. 2/4922 kg/ud
20
0,02
It consists of a BF-bolt and a serrated nut DIN6923. The bolt-BF is specifically designed for BASOR to form a perfect fit between the wire trays.
21
P
BF STAPLE
PATENTED 9602521
DESCRIPTION BF Staple
UVM ud 100
UVE ud 1500
8x8
ACCESSORIES
SSC CENTRAL SUSPENSION
DESCRIPTION SSC UVM ud 10 UVE ud 400 CINCADO REF. kg/ud 2/2064 0,03 BICRO REF. kg/ud 2/2065 0,03 GC REF. 2/0363 kg/ud 0,03
50
The SSC allows fix the tray to the ceiling with a electrogalvanised M8 threated rod reference number 2/3397. At each point of attachment takes two SSC (upper and lower), a rod and two nuts M8 DIN6923, reference 0/0338 in CINCADO and 0/0927 in GC (both products packed in bags of 100). Also can be used as a fastener between wire mesh and any support with a B1 bolt set reference 2/4356 in CINCADO or 2/6826 in GC.
60
SL
DESCRIPTION SL UVM ud 10 UVE ud 100 GS REF. 2/0355 kg/ud 0,08 REF. 2/0365 GC kg/ud 0,13
6,5 0
1,20
60 25 13 14 21 127 29 80
Allows attachment BASORFIL trays to wall . Used with models 60x65 and 100x65.
87 101
STB
DESCRIPTION STB UVM ud 1 UVE ud 1 GS REF. 2/0356 kg/ud 0,14 REF. 2/0366 GC kg/ud 0,14
81 23,5
Allows the fixation of conduits to the cables outlet. You can see section cable management systems insulation conduit.
56 SCM BFR/BF
40
18
23
SCM
BASORFIL
Accessorie s
BFR/BF
GS
GC
28
7,50
73 88
15
SIMPLE SL
DESCRIPTION Simple SL UVM ud 10 UVE ud 100 GS REF. 2/0360 kg/ud 0,05 REF. 2/0370 GC kg/ud 0,05
25 67 103 18x7.5 30 19 12x8
This piece allows to fix the BASORFIL trays to wall or ceiling, in this case with threaded rod. For wall mounting is used with a 60x65 and 100x65 models only. When mounted with threaded rod is necessary to take both sides of the tray. In this case the maximum width of tray is 200, being valid the heights 65 and 105 only.
DROP-OUT PLATE
DESCRIPTION BF/BFR Drop-Out Plate UVM ud 1 UVE ud 1 GS REF. 2/6451 kg/ud 0,18 REF. 2/6452 GC kg/ud 0,20
R1 00
To assemble drop-out plate with cable trays its necessary to use a SSC, a bolt M8x25 DIN933 CINCADO (reference 0/0310) and a serrated nut DIN6923 CINCADO) (reference 0/0338).
9
176 148
SCM BFR/BF 57
25 83
25
40 86 104
SCM
BASORFIL
Accessories / Mounts
BFR/BF
Supplement used in the workplace for construction of accessories (vertical inside/outside, reduction, etc.)
BASORFIL MOUNTS
HORIZONTAL BEND VERTICAL INSIDE LEVEL CHANGE VERTICAL OUTSIDE+INSIDE
To reinforce the accessorie can be used pieces of multijunction with BF bolt-nut sets.
To reinforce the accessorie can be used pieces of multijunction with BF bolt-nut sets.
To reinforce the accessorie can be used pieces of multijunction with BF bolt-nut sets.
58 SCM BFR/BF
500
SCM
BASORFIL
Mounts
REDUCTION BFR+PS+B1+BF STAPLE BFR+SRB
BFR/BF
T INTERSECTION
BFR+SL+VR8
BFR+SVO+VR8+SSC+B1
SVO page 85 Threaded rod VR8 and nut- page 166 B1 set bolt page 18
SL
SIMPLE SL
DROP-OUT PLATE
SCM BFR/BF 59
6 1
3 2 4
1. FE Cable ladder 2. BSL Cable ladder 3. CPFE Horizontal bend 4. CCFE Vertical inside 5. CXFE Vertical outside 6. TEFE T Intersection 7. CRFE Cross intersection 8. FE Adjustable joint 9. REFE Reduction
SCM
CABLE LADDER
FE H60
........................................................................................
..............................................
................................................
FE H75/100/120/150
...........................................
...........................................................
............................................................
BASORTRAV is a range of cable ladders specifically designed to be used in electrical connections with thick or high power cables which require a higher degree of ventilation. They are assembled on big electrical systems such as nuclear plants, tunnels or airports. These cable trays have the advantage of having a great resistance to flexure.
GC
SCM
FE
BASORTRAV
Cable ladders
PATENTED 9803132
No couplers needed Easier to install Less time required for installation Union with higher degree of rigidity
3 Rungs with a curved finish to avoid damaging of the cables. There are different cable fixation standard
USEFUL AREA (cm2) B (mm) 100 150 200 300 400 500 600 H60 45 67 89 134 178 223 267
62 SCM FE
SCM
FE
BASORTRAV
Cable Ladder and Accessories
25x8.5
L=3m
For the assembly, no couplers are needed. Each stretch requires 4 bolts with reference number 2/6792 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, couplers with reference number 2/0854 in GS are needed. For more technical information, please consult page 211. Other lengths may be manufactured under order.
20x9
FE COVER
DESCRIPTION FE COVER 100 FE COVER 150 FE COVER 200 FE COVER 300 FE COVER 400 FE COVER 500 FE COVER 600 UVM m 3 3 3 3 2 2 2 UVE m 3 3 3 3 2 2 2 B mm 100 150 200 300 400 500 600 e mm 0,7 0,7 0,7 0,7 0,7 0,8 0,8 GC REF. 2/4937 2/4472 2/4473 2/3579 2/4430 2/4509 2/4494 kg/m 1,10 1,62 1,75 2,71 3,44 4,17 6,01
B+38
9
14 20x9
25x8.5
For the assembly, no couplers are needed. Each bend requires 4 bolts with reference number 2/6792 in GC (products packed in bags containing 100 units).
80
125
20x9
20
For the assembly, no couplers are needed. Each bend requires 4 bolts with reference number 2/6792 in GC (products packed in bags containing 100 units).
35
SCM FE 63
SCM
FE
BASORTRAV
Accessories
GC
14
9
20x9 80
35 25x8.5 B H 14 20x9 25x8.5 B+516 B B 125 133 20 H-10 40 25x9 15 160 25x9 40 110 97.5x9 H-16 264 58 25x9 46 17 15
For the assembly, no couplers are needed. Each cross derivation requires 12 bolts with reference number 2/6792 in GC (products packed in bags containing 100 units).
4 bolts are needed to mount each joint plate, with reference number 2/6792 in GC (products packed in bags containing 100 units).
4 bolts are needed to mount each union joint, with reference number 2/6792 in GC (products packed in bags containing 100 units).
ANGLE JOINT
DESCRIPTION J/UNIN UB FE H60 UVM ud 10 UVE ud 125 H mm 60 e mm 2 GC REF. 2/0860 kg/ud 0,13
4 bolts are needed to mount each union joint, with reference number 2/6792 in GC (products packed in bags containing 100 units).
REDUCTION FE H60
DESCRIPTION REFE 50x60 REFE 100x60 REFE 150x60 REFE 200x60 UVM ud 1 1 1 1 UVE ud 1 1 1 1 B mm 50 100 150 200 H mm 63 63 63 63 e mm 2 2 2 2 GC REF. 2/6799 2/6800 2/6801 2/6802 kg/ud 0,16 0,20 0,25 0,30
H 40
For the assembly, no couplers are needed. Each reduction requires 4 bolts with reference number 2/6792 in GC (products packed in bags containing 100 units).
64 SCM FE
133
For the assembly, no couplers are needed. Each T derivation requires 8 bolts with reference number 2/6792 in GC (products packed in bags containing 100 units).
125
35
11 0
SCM
FE
FE CLAMP
BASORTRAV
Accessories and Mounts
37
Used to fix the trays to the supports. 2 clamps are needed for each support
15 55
15
37
e mm 2 2
GC
20x8.5
20x12
15
55
15
M-6/8
M-10/12
The B2 bolt set consists of a M8x15 DIN603 mushroom head square neck bolt and a M8 DIN6923 flange nut with serration for a perfect fit. Used to mount all accessories BASORTRAV series.
15
FE H60 MOUNTS
FE SELF-ASSEMBLY CCCX FE H60 CPFE H60 REFE H60 + FE H60
UA FE H60
SCM FE 65
SCM
FE
BASORTRAV
Cable Ladder
PATENTED 9803132
No couplers needed Easier to install Less time required for installation Union with higher degree of rigidity
3 Rungs with a curved finish to avoid damaging of the cables. There are different cable fixation standard
USEFUL AREA (cm2) B (mm) 100 150 200 300 400 500 600 H75 59 89 118 177 236 295 354 H100 84 126 168 252 336 420 504 H120 156 208 312 416 520 624 H150 201 268 402 536 670 804
66 SCM FE
SCM
FE
BASORTRAV
Cable ladder
L=3m
For the assembly, no couplers are needed. Each stretch requires 4 bolts with reference number 2/6792 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, FE couplers of the corresponding height in GC are needed. For more technical information, please consult page 211. Other lengths may be manufactured under order.
20x9
35
25x8.5 333
L=3m
For the assembly, no couplers are needed. Each stretch requires 4 bolts with reference number 2/6792 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, FE couplers of the corresponding height in GC are needed. For more technical information, please consult page 211. Other lengths may be manufactured under order.
9
20x9
GC
1,5
L=3m
For the assembly, no couplers are needed. Each stretch requires 4 bolts with reference number 2/6792 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, FE couplers of the corresponding height in GC are needed. For more technical information, please consult page 211. Other lengths may be manufactured under order.
9
20x9
L=3m
For the assembly, no couplers are needed. Each stretch requires 8 bolts with reference number 2/6792 in GC (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, FE couplers of the corresponding height in GC are needed. For more technical information, please consult page 211. Other lengths may be manufactured under order.
20x9
40
25x8.5
25x8.5
SCM FE 67
167
SCM
FE
BASORTRAV
Accessories
UVM UVE B H DESCRIPTION ud ud mm mm CPFE 100x75 1 2 100 75 CPFE 150x75 1 2 150 75 CPFE 200x75 1 2 200 75 CPFE 300x75 1 2 300 75 CPFE 400x75 1 2 400 75 CPFE 500x75 1 2 500 75 CPFE 600x75 1 2 600 75 CPFE 100x100 1 2 100 100 CPFE 150x100 1 2 150 100 CPFE 200x100 1 2 200 100 CPFE 300x100 1 2 300 100 CPFE 400x100 1 2 400 100 CPFE 500x100 1 2 500 100 CPFE 600x100 1 2 600 100 CPFE 150x120 1 2 150 120 CPFE 200x120 1 2 200 120 CPFE 300x120 1 2 300 120 CPFE 400x120 1 2 400 120 CPFE 500x120 1 2 500 120 CPFE 600x120 1 2 600 120 CPFE 150x150 1 2 150 150 CPFE 200x150 1 2 200 150 CPFE 300x150 1 2 300 150 CPFE 400x150 1 2 400 150 CPFE 500x150 1 2 500 150 CPFE 600x150 1 2 600 150 Two FE couplers of the corresponding height are needed to mount e mm 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 GC REF. 2/0887 2/0888 2/0889 2/0890 2/0891 2/0892 2/0893 2/0895 2/0896 2/0897 2/0898 2/0899 2/0900 2/0901 2/6880 2/6881 2/6882 2/6883 2/6884 2/6885 2/6886 2/6887 2/6888 2/6889 2/6890 2/6891 kg/ud 3,46 3,77 4,07 4,69 5,63 6,33 7,53 4,23 4,57 4,91 5,59 6,60 7,36 8,64 5,38 5,80 6,64 7,94 8,90 10,53 6,33 6,80 7,72 9,10 10,14 11,85
H B
HORIZONTAL BEND FE
14
9
20x9 18x7.5
25x8.5
R3 30
150
35
B+480
20
9
20x9 18x7.5
25x8.5
R3 30
150
40
B+480
CPFE H150
Each bend requires 8 bolts (16 for H150 height) with reference number 2/6792 in GC (products packed in bags containing 100 units).
VERTICAL INSIDE FE
UVM UVE B H DESCRIPTION ud ud mm mm CCFE 100x75 1 2 100 75 CCFE 150x75 1 2 150 75 CCFE 200x75 1 2 200 75 CCFE 300x75 1 2 300 75 CCFE 400x75 1 2 400 75 CCFE 500x75 1 2 500 75 CCFE 600x75 1 2 600 75 CCFE 100x100 1 2 100 100 CCFE 150x100 1 2 150 100 CCFE 200x100 1 2 200 100 CCFE 300x100 1 2 300 100 CCFE 400x100 1 2 400 100 CCFE 500x100 1 2 500 100 CCFE 600x100 1 2 600 100 CCFE 150x120 1 2 150 120 CCFE 200x120 1 2 200 120 CCFE 300x120 1 2 300 120 CCFE 400x120 1 2 400 120 CCFE 500x120 1 2 500 120 CCFE 600x120 1 2 600 120 CCFE 150x150 1 2 150 150 CCFE 200x150 1 2 200 150 CCFE 300x150 1 2 300 150 CCFE 400x150 1 2 400 150 CCFE 500x150 1 2 500 150 CCFE 600x150 1 2 600 150 Two FE couplers of the corresponding height are needed to mount e mm 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 GC REF. 2/4794 2/4596 2/4548 2/4549 2/0802 2/0803 2/0804 2/0805 2/0806 2/0807 2/0808 2/0809 2/0810 2/0811 2/6892 2/6893 2/6894 2/6895 2/6896 2/6897 2/6898 2/6899 2/6900 2/6901 2/6902 2/6903 kg/ud 2,71 2,88 3,07 3,43 3,78 4,14 4,50 3,50 3,69 3,86 4,22 4,59 4,94 5,30 4,51 4,74 5,22 5,69 6,16 6,64 5,50 5,73 6,21 6,68 7,15 7,63
R 29 6+ H
14
25x9
9
18x7.5 25x8.5
35 150
R 29 6+ H
25x9 H
20
9
18x7.5 25x8.5
40 150
CCFE H150
Each accessory requires 8 bolts (16 for H150 height) with reference number 2/6792 in GC (products packed in bags containing 100 units).
68 SCM FE
SCM
FE
BASORTRAV
Accessories
UVM UVE B H DESCRIPTION ud ud mm mm CXFE 100x75 1 2 100 75 CXFE 150x75 1 2 150 75 CXFE 200x75 1 2 200 75 CXFE 300x75 1 2 300 75 CXFE 400x75 1 2 400 75 CXFE 500x75 1 2 500 75 CXFE 600x75 1 2 600 75 CXFE 100x100 1 2 100 100 CXFE 150x100 1 2 150 100 CXFE 200x100 1 2 200 100 CXFE 300x100 1 2 300 100 CXFE 400x100 1 2 400 100 CXFE 500x100 1 2 500 100 CXFE 600x100 1 2 600 100 CXFE 150x120 1 2 150 120 CXFE 200x120 1 2 200 120 CXFE 300x120 1 2 300 120 CXFE 400x120 1 2 400 120 CXFE 500x120 1 2 500 120 CXFE 600x120 1 2 600 120 CXFE 150x150 1 2 150 150 CXFE 200x150 1 2 200 150 CXFE 300x150 1 2 300 150 CXFE 400x150 1 2 400 150 CXFE 500x150 1 2 500 150 CXFE 600x150 1 2 600 150 Two FE couplers of the corresponding height are needed to mount e mm 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 GC REF. 2/0909 2/0910 2/0911 2/0912 2/0913 2/0914 2/0915 2/0916 2/0917 2/0918 2/0919 2/0920 2/0921 2/0922 2/6904 2/6905 2/6906 2/6907 2/6908 2/6909 2/6910 2/6911 2/6912 2/6913 2/6914 2/6915 kg/ud 2,61 2,75 2,88 3,15 3,43 3,70 3,97 3,41 3,55 3,69 3,95 4,22 4,49 4,76 4,32 4,51 4,86 5,21 5,57 5,92 5,31 5,50 5,85 6,21 6,56 6,91
9
14 H + 463
VERTICAL OUTSIDE FE
H
3 R3
150
35
H + 463
20
3 R3
150
40
CXFE H150
Each bend requires 8 bolts (16 for H150 height) with reference number 2/6792 in GC (products packed in bags containing 100 units).
TE DERIVATION FE
UVM UVE B H DESCRIPTION ud ud mm mm TEFE 100x75 1 2 100 75 TEFE 150x75 1 2 150 75 TEFE 200x75 1 2 200 75 TEFE 300x75 1 2 300 75 TEFE 400x75 1 2 400 75 TEFE 500x75 1 2 500 75 TEFE 600x75 1 2 600 75 TEFE 100x100 1 2 100 100 TEFE 150x100 1 2 150 100 TEFE 200x100 1 2 200 100 TEFE 300x100 1 2 300 100 TEFE 400x100 1 2 400 100 TEFE 500x100 1 2 500 100 TEFE 600x100 1 2 600 100 TEFE 150x120 1 2 150 120 TEFE 200x120 1 2 200 120 TEFE 300x120 1 2 300 120 TEFE 400x120 1 2 400 120 TEFE 500x120 1 2 500 120 TEFE 600x120 1 2 600 120 TEFE 150x150 1 2 150 150 TEFE 200x150 1 2 200 150 TEFE 300x150 1 2 300 150 TEFE 400x150 1 2 400 150 TEFE 500x150 1 2 500 150 TEFE 600x150 1 2 600 150 Four FE couplers of the corresponding height are needed to mount e mm 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
14
REF. 2/0930 2/0931 2/0932 2/0933 2/0934 2/0935 2/0936 2/0937 2/0938 2/0939 2/0940 2/0941 2/0942 2/0943 2/6916 2/6917 2/6918 2/6919 2/6920 2/6921 2/6922 2/6923 2/6924 2/6925 2/6926 2/6927
kg/ud 5,41 5,76 6,12 6,84 8,01 8,81 9,62 6,56 6,94 7,32 8,08 9,29 10,14 10,98 8,20 8,69 9,67 11,24 12,33 13,42 9,61 10,13 11,15 12,78 13,92 15,06
GC
9
25x9 18x7.5
B + 960
35 25x8.5
R3 3
150
150
9
25x9 18x7.5
25x8.5 40
960 + B
R33 0
150
150
TEFE H150
Each accessory requires 16 bolts (32 for H150 height) with reference number 2/6792 in GC (products packed in bags containing 100 units).
SCM FE 69
SCM
FE
BASORTRAV
Accessories
UVM UVE B H DESCRIPTION ud ud mm mm CRFE 100x75 1 2 100 75 CRFE 150x75 1 2 150 75 CRFE 200x75 1 2 200 75 CRFE 300x75 1 2 300 75 CRFE 400x75 1 2 400 75 CRFE 500x75 1 2 500 75 CRFE 600x75 1 2 600 75 CRFE 100x100 1 2 100 100 CRFE 150x100 1 2 150 100 CRFE 200x100 1 2 200 100 CRFE 300x100 1 2 300 100 CRFE 400x100 1 2 400 100 CRFE 500x100 1 2 500 100 CRFE 600x100 1 2 600 100 CRFE 150x120 1 2 150 120 CRFE 200x120 1 2 200 120 CRFE 300x120 1 2 300 120 CRFE 400x120 1 2 400 120 CRFE 500x120 1 2 500 120 CRFE 600x120 1 2 600 120 CRFE 150x150 1 2 150 150 CRFE 200x150 1 2 200 150 CRFE 300x150 1 2 300 150 CRFE 400x150 1 2 400 150 CRFE 500x150 1 2 500 150 CRFE 600x150 1 2 600 150 Six FE couplers of the corresponding height are needed to mount e mm 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 GC REF. 2/0951 2/0952 2/0953 2/0954 2/0955 2/0956 2/0957 2/0958 2/0959 2/0960 2/0961 2/0962 2/0963 2/0964 2/6928 2/6929 2/6930 2/6931 2/6932 2/6933 2/6934 2/6935 2/6936 2/6937 2/6938 2/6939
CROSS DERIVATION FE
kg/ud 6,54 6,75 7,07 9,90 10,71 11,44 15,01 7,85 8,15 8,47 11,29 12,11 12,84 16,40 9,62 10,04 13,81 14,90 15,87 20,62 11,30 11,72 15,49 16,57 17,55 22,30
H 14 20x9
25x8.5 35
R3 30
9
150 40
R3 30
B B+960
20x9
25x8.5
B B+960
20
150
CRFE H150
Each bend requires 24 bolts (48 for H150 height) with reference number 2/6792 in GC (products packed in bags containing 100 units).
FE COVER
DESCRIPTION FE COVER 100 FE COVER 150 FE COVER 200 FE COVER 300 FE COVER 400 FE COVER 500 FE COVER 600 UVM m 3 3 3 3 2 2 2 UVE m 3 3 3 3 2 2 2 B mm 100 150 200 300 400 500 600 e mm 0,7 0,7 0,7 0,7 0,7 0,8 0,8 GC REF. 2/4937 2/4472 2/4473 2/3579 2/4430 2/4509 2/4494 kg/m 1,10 1,62 1,75 2,71 3,44 4,17 6,01
B+38
FE JOINT PLATE
DESCRIPTION JOINT PLATE U FE 75 JOINT PLATE U FE 100 JOINT PLATE U FE 120 JOINT PLATE U FE 150 UVM ud 10 10 10 10 UVE ud 125 125 125 125 H mm 75 100 120 150 e mm 2 2 2 2 GC REF. 2/0854 2/0856 2/6940 2/6941 kg/ud 0,08 0,20 0,25 0,33
20 H-25 40
25x9 160
U FE 75
50 50 H-25 40
Each joint plate requires 4 bolts (8 for H150 height) with reference number 2/6792 in GC (products packed in bags containing 100 units). 20
H-25
180
25x9 180
U FE 100/120
U FE 150
70 SCM FE
37,5
25x9
21
50
15
SCM
FE
BASORTRAV
Accessories
FE ARTICULATED JOINT
DESCRIPTION FE A/JOINT H75 FE A/JOINT H100 FE A/JOINT H120 FE A/JOINT H150 UVM ud 10 10 10 10 UVE ud 125 125 125 125 B mm 110 137,5 138 138 H mm 75 100 120 150 e mm 2 2 2 2
H25
GC REF. 2/0857 2/0859 2/6944 2/6945 kg/ud 0,08 0,20 0,25 0,33
25x9
UA FE H75/100/120
40
20
Each articulated joint requires 4 bolts (8 for H150 height) with reference number 2/6792 in GC (products packed in bags containing 100 units).
H25
25x9
UA FE H150
46 20
FE ANGLE JOINT
DESCRIPTION FE A/JOINT UB H75 FE A/JOINT UB H100 FE A/JOINT UB H120 FE A/JOINT UB H150 UVM ud 10 10 10 10 UVE ud 125 125 125 125 H mm 75 100 120 150 e mm 2 2 2 2 GC REF. 2/0860 2/0862 2/6944 2/6945 kg/ud 0,13 0,30 0,38 0,46
H-30 97.5x9 264 58
UB FE H75/100
97
Each angle joint requires 4 bolts (8 for H150 height) with reference number 2/6792 in GC (products packed in bags containing 100 units).
97.5x9 264 58
UB FE H120
H-26
97.5x9
37,5 50 264 58
15
UB FE H150
SCM FE 71
37
50
SCM
FE
BASORTRAV
Accessories
FE REDUCTION
DESCRIPTION FE REDUCTION 50x75 FE REDUCTION 100x75 FE REDUCTION 150x75 FE REDUCTION 200x75 FE REDUCTION 50x100 FE REDUCTION 100x100 FE REDUCTION 150x100 FE REDUCTION 200x100 FE REDUCTION 50x120 FE REDUCTION 100x120 FE REDUCTION 150x120 FE REDUCTION 200x120 FE REDUCTION 50x150 FE REDUCTION 100x150 FE REDUCTION 150x150 FE REDUCTION 200x150 UVM ud 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 B mm 50 100 150 200 50 100 150 200 50 100 150 200 50 100 150 200 H mm 75 75 75 75 100 100 100 100 120 120 120 120 150 150 150 150 e mm 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 GC REF. 2/6803 2/6804 2/6805 2/6806 2/6807 2/6808 2/6809 2/6810 2/6954 2/6955 2/6956 2/6957 2/6958 2/6959 2/6960 2/6961 kg/ud 0,17 0,23 0,30 0,36 0,26 0,34 0,43 0,51 0,33 0,43 0,53 0,63 0,42 0,55 0,67 0,80
H H - 30 25x9
46
17
RE FE H75/100/120
H H - 30
25x9
46
17
Each piece requires 4 bolts (8 for H150 height) with reference number 2/6792 in GC (products packed in bags containing 100 units).
B
RE FE H150
FE CLAMP
DESCRIPTION FE CLAMP M-6/8 FE CLAMP M-10/12 UVM ud 100 100 UVE ud 500 500 e mm 2 2
2
37
Used to fix the trays to the supports. Two clamps are needed for each support.
15 55
15
37
GC
20x8.5
20x12
15
50 15
55
M-6/8
M-10/12
The B2 bolt set consists of a M8x15 DIN603 mushroom head square neck bolt and a M8 DIN6923 flange nut with serration for a perfect fit. Used to mount all accessories BASORTRAV series.
15
72 SCM FE
SCM
FE
BASORTRAV
Mounts
FE MOUNTS
FE SELF-ASSEMBLY CPFE HORIZONTAL BEND CC VERTICAL INSIDE CRFE CROSS INTERSECTION
REFE + FE
SCM FE 73
SCM
BASORTRAV
Cable Ladder
BSL
5 1 3 4
Ventilation in case a cover is assembled. Assembly in situations in which the union between the parts when cut is done at the workplace.
3 Rungs are characterised by two things:
Their varied layout allows the use of different cable fixation systems. Their curved design avoids possible accidents in cables and people.
4 Perforations prepared for the fixing of a cover. 5 Profile designed to sustain great loads. 6 Circular accessories which allow a radius of curvature of the cables of 330 mm.
USEFUL AREA (cm2) BSL 300 400 600 H150 345 460 690 H200 495 660 990
74 SCM BSL
SCM
BSL
BASORTRAV
Cable Ladder and Accessories
35x11 175
L=3m
3000
For the assembly of the cable trays, 2 BSL H150 couplers with reference number 2/6445 in GC and 16 bolts with reference number 2/6319 in cincado or 2/6320 in I304 are needed (products packed in bags containing 100 units). Other lengths may be manufactured under order. For more technical information, please consult page 211.
300
12x8
L=3m
For the assembly of the cable trays, 2 BSL H200 couplers with reference number 2/6446 in GC and 16 bolts with reference number 2/6319 in cincado or 2/6320 in I304 are needed (products packed in bags containing 100 units). Other lengths may be manufactured under order. For more technical information, please consult page 211.
For the assembly of the bend, 2 BSL couplers of the corresponding height and 16 bolts with reference number 2/6319 in cincado or 2/6320 in I304 are needed (products packed in bags containing 100 units).
R330
150
(H
26
0)
For the assembly of the accessory, 2 BSL couplers of the corresponding height and 16 bolts with reference number 2/6319 in cincado or 2/6320 in I304 are needed (products packed in bags containing 100 units).
150
SCM BSL 75
SCM
BASORTRAV
Accessories
BSL
150
For the assembly of the accessory, 2 BSL couplers of the corresponding height and 16 bolts with reference number 2/6319 in cincado or 2/6320 in I304 are needed (products packed in bags containing 100 units).
TEBSL INTERSECTION
DESCRIPTION TEBSL 300x150 TEBSL 400x150 TEBSL 600x150 TEBSL 300x200 TEBSL 400x200 TEBSL 600x200 UVM ud 1 1 1 1 1 1 UVE ud 2 2 2 2 2 2 B mm 300 400 600 300 400 600 H mm 150 150 150 200 200 200 e mm 2 2 2 2 2 2
H 35
20
GC
35x11
For the assembly of the accessory, 4 BSL couplers of the corresponding height and 32 bolts with reference number 2/6319 in cincado or 2/6320 in I304 are needed (products packed in bags containing 100 units).
150 B
40
17,73
B + 960
15,35
25x8.5 B
R33 0
150
CRBSL INTERSECTION
DESCRIPTION CRBSL 300x150 CRBSL 400x150 CRBSL 600x150 CRBSL 300x200 CRBSL 400x200 CRBSL 600x200 UVM ud 1 1 1 1 1 1 UVE ud 2 2 2 2 2 2 B mm 300 400 600 300 400 600 H mm 150 150 150 200 200 200 e mm 2 2 2 2 2 2 GC
35
20 35x11
25x8.5 40
For the assembly of the accessory, 6 BSL couplers of the corresponding height and 48 bolts with reference number 2/6319 in cincado or 2/6320 in I304 are needed (products packed in bags containing 100 units).
R33 0
B B + 960
150
UVM ud
UVE ud
H mm
e mm
GC REF. kg/ud
12 35x11 50 25
For the assembly of the joint plate, 8 bolts with reference number 2/6319 in cincado or 2/6320 in I304 are needed (products packed in bags containing 100 units).
200
UVM ud
UVE ud
H mm
e mm
GC REF. kg/ud
150
15
35x11
For the assembly of the articulated joint, 8 bolts with reference number 2/6319 in cincado or 2/6320 in I304 are needed (products packed in bags containing 100 units).
25
50
76 SCM BSL
SCM
BSL
BASORTRAV
Accessories and Mounts
UVM ud 10 10
H mm 150 200
e mm 2 2
For the assembly of the angle joint, 8 bolts with reference number 2/6319 in cincado or 2/6320 in I304 are needed (products packed in bags containing 100 units).
The bolt set consists of a M10x30 DIN933 and nut DIN934. Used to mount all accessories BSL BASORTRAV.
BSL MOUNTS
JOINT PLATE ANGLE JOINT CP BSL CC BSL
CRBSL
SCM BSL 77
WALL SUPPORTS
1
CEILING SUPPORTS
5
3 3
1. SR with wall bracket 2. SPL 3. SHL 4. SHV 6. SZ 7. SPD 8. IPN PROFILE 9. SV 10. IPN HEAD 11. SP
SCM
FLOOR SUPPORTS
SUPPORTS
WALL AND CURVED WALL SUPPORTS.....Page 80 CEILING SUPPORTS FLOOR SUPPORTS
................................................
.....................................................
ASSEMBLY OF SUPPORTS
..........................
10
11
GS / GC / CINCADO
SCM
BASORSUPPORT
Wall and curved wall supports
SWL (kg) WALL AND CURVED WALL SUPPORTS
B
PRODUCT
50
100
150
200
300
400
500
600
700
800
1000
Page
SHO
85
75
100
70
81
SCR
LIGHT LOADS
70
70
70
70
70
70
70
60
60
81
SRB
60
60
60
60
60
60
60
60
81
SR (WALL BRACKET)
120
110
100
80
82
SR (PC)
250
250
250
240
82
SPL
MEDIUM LOADS
300
300
240
180
150
130
82
SHL
250
250
200
200
200
180
150
82
SP
350
350
290
250
220
200
82
SHR
340
340
340
340
340
340
83
SPD
GREAT LOADS
500
430
370
320
260
83
SHV
270
270
270
270
270
270
83
80 SCM SUPPORTS
SCM
BASORSUPPORT
Wall and Curved Wall Supports
SHO SUPPORT
DESCRIPTION SHO 100 Support SHO 150 Support SHO 200 Support SHO 300 Support SHO Supporting piece
SHO Support
UVM ud 1 1 1 1 1
UVE ud 10 10 10 10 10
50
25
GS
GC
20
B+70 20x9
When an SHO support is used directly on the wall or with a pendant without an OMEGA profile, its necessary to use piece 2/6240 in GS or 2/6318 in GC. For more technical information, please consult page 211.
SHO Support
12
18
SCR SUPPORT
DESCRIPTION SCR 50 Support SCR 100 Support SCR 150 Support SCR 200 Support SCR 300 Support SCR 400 Support SCR 500 Support SCR 600 Support SCR 750 Support UVM ud 1 1 1 1 1 1 1 1 1 UVE ud 100 100 80 60 10 10 10 10 5 B mm 50 100 150 200 300 400 500 600 750 SWL (kg) 70 70 70 70 70 70 70 60 60 REF. 2/0975 2/0976 2/0977 2/0978 2/0997 2/0998 2/0999 2/1000 2/3438 kg/ud 0,19 0,24 0,30 0,38 0,66 0,83 0,95 1,11 1,50 REF. 2/3450 2/0980 2/0981 2/0982 2/1002 2/1003 2/1004 2/1005 2/1006 kg/ud 0,20 0,27 0,33 0,42 0,68 0,85 1,03 1,20 1,81
86 36 20
GS
GC
12
20x8
25x7.5
45
B+50
SCR Support50/100/200/300/400
20
12
12x8
122 37 34
20x8
18x7.5 40
35x7.5
B+50
SCR Support500/600/750
SRB SUPPORT
DESCRIPTION SRB 100 Support SRB 150 Support SRB 200 Support SRB 300 Support SRB 400 Support SRB 500 Support SRB 600 Support UVM ud 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 B mm 100 150 200 300 400 500 600 SWL (kg) 60 60 60 60 60 60 60 REF. 2/6372 2/6373 2/6374 2/6375 2/6376 2/6377 2/6378 kg/ud 0,25 0,26 0,38 0,66 0,80 1,01 1,11 REF. 2/6379 2/6380 2/6381 2/6382 2/6383 2/6384 2/6385 kg/ud 0,27 0,29 0,42 0,68 0,85 1,09 1,20
85 37 20
GS
GC
12
12x8
20x8
SRB Support100/150/200
20
12
12x8
85 37 20x8
SRB Support300/400
122 37 20
No bolts are needed to fix the wire-mesh cable trays. For more technical information, please consult page 211.
12
12x8
20x8
SRB Support500
122 37 20
12
12x8
20x8
SRB Support600
Allows the assembly of models B500/600/750 of the SCR and SRB supports in curved walls and inclined planes.
73
60
37
SCM SUPPORTS 81
55 85
SCM
BASORSUPPORT
Wall and Curved Wall Supports
SR SUPPORT
DESCRIPTION SR 300 Support SR 400 Support SR 500 Support SR 600 Support SR Wall Bracket SR Bolt UVM ud 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 B mm 300 400 500 600 H Wall Bracket PC mm SWL (kg) SWL (kg) 80 120 250 100 110 250 100 100 250 100 80 240 REF. 2/1028 2/1029 2/1030 2/1031 2/6827 2/6793 kg/ud 0,78 1,14 1,38 1,71 0,33 REF. 2/1032 2/1033 2/1034 2/1035 2/6828 kg/ud 0,83 1,22 1,48 1,84 0,35 13
GS
GC
11
20x9 17x9
75 125 59
9
87 8x8
SR + Wall Bracket
Wall Bracket SR
B+50 54 H 14 80 120 50 50 37 50 37 14 50 80 120 35 B + 50 25x9 2,5 25x11 41 30 25x9 30 1,5 53
It can be used in three ways. On walls with a PC profile, on cealings with a PC profile and on curves with a wall bracket. For assembly with wall bracket, 1 SR bolt with reference number 2/6793 and 2 B2 bolt set with reference 2/4926 in CINCADO or 2/6792 in GC are needed. For assembly with PC profile, 4 B1 bolt sets with reference 2/4356 in GS or 2/6826 in GC are needed. For more technical information, please consult page 211.
35x7.5 37,5
SR Wall Bracket
SR
SPL SUPPORT
DESCRIPTION SPL 150 Support SPL 200 Support SPL 300 Support SPL 400 Support SPL 500 Support SPL 600 Support UVM ud 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 B mm 150 200 300 400 500 600 SWL (kg) 300 300 240 180 150 130 CINCADO REF. kg/ud 2/6844 0,62 2/6845 0,64 2/6846 0,66 2/6847 0,93 2/6848 1,10 2/6849 1,40 GC REF. 2/6836 2/6837 2/6838 2/6839 2/6840 2/6841 kg/ud 0,69 0,70 0,72 1,03 1,21 1,54
41
25x11 41 50
B+50
SHL SUPPORT
DESCRIPTION SHL 100 Support SHL 150 Support SHL 200 Support SHL 300 Support SHL 400 Support SHL 500 Support SHL 600 Support UVM ud 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 H mm 70 70 80 80 90 100 110 A mm 125 125 125 125 160 160 160 B mm SWL (kg) 100 250 150 250 200 200 300 200 400 200 500 180 600 150 CINCADO REF. kg/ud 2/6873 0,30 2/6874 0,35 2/6875 0,47 2/6876 0,64 2/6877 0,91 2/6878 1,08 2/6879 1,26 GC REF. 2/6866 2/6867 2/6868 2/6869 2/6870 2/6871 2/6872 kg/ud 0,33 0,39 0,51 0,69 0,98 1,16 1,35
14
60 15 20 125 H
SHL 100/150/200
14
60 50 e
A H
20
SHL 300/400/500/600
SP SUPPORT
DESCRIPTION SP 150 Support SP 200 Support SP 300 Support SP 400 Support SP 500 Support SP 600 Support UVM ud 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 B mm 150 200 300 400 500 600 SWL (kg) 350 350 290 250 220 200 CINCADO REF. kg/ud 2/6829 0,68 2/6830 0,80 2/6831 1,06 2/6832 1,31 2/6833 1,56 2/6834 1,82 GC REF. 2/4939 2/4733 2/4734 2/1036 2/1037 2/4938 kg/ud 0,71 0,84 1,11 1,38 1,64 1,91
41
50 B + 50
82 SCM SUPPORTS
SCM
BASORSUPPORT
Wall and Curved Wall Supports
SHR SUPPORT
DESCRIPTION SHR 300 Support SHR 400 Support SHR 500 Support SHR 600 Support SHR 700 Support SHR 800 Support UVM ud 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 B mm 300 400 500 600 700 800 e mm 4 4 4 5 5 5 GC SWL (kg) 340 340 340 340 340 340 REF. 2/5525 2/1023 2/1024 2/1025 2/1026 2/1027 kg/ud 1,29 1,57 1,86 2,15 2,43 2,72
15 140 108
14
90 35 50 B+50 30 e 25x9 50 37 14 2,5 25x11 50 50 B+50
SPD SUPPORT
DESCRIPTION SPD 500 Support SPD 600 Support SPD 700 Support SPD 800 Support SPD 1000 Support UVM ud 1 1 1 1 1 UVE ud 1 1 1 1 1 B mm 500 600 700 800 1000 GC SWL (kg) 500 430 370 320 260 REF. 2/6272 2/5621 2/6273 2/6274 2/4641 kg/ud 3,18 3,71 4,24 4,77 5,84
SHV SUPPORT
DESCRIPTION SHV 200 Support SHV 300 Support SHV 400 Support SHV 500 Support SHV 600 Support SHV 700 Support SHV 800 Support UVM ud 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 B mm 200 300 400 500 600 700 800 GC SWL (kg) 270 270 270 270 270 270 270 REF. 2/6058 2/6271 2/6259 2/6057 2/6275 2/6276 2/6277 kg/ud 0,99 1,28 1,58 1,88 2,17 2,47 2,77
108
41
13
44 B+50 30 25x9 50 37 80
36
It is mounted with the IPN80 profile, 2 bolts M10x30 with reference 0/0512 in CINCADO or 0/0320 in I304 are needed (products packed in bags of 100). For more technical information, please consult page 211.
= =
= 100 63x13
20
70
50
SCM SUPPORTS 83
50
35
120 160
82
SCM
BASORSUPPORT
Ceiling Supports
SWL (kg) CEILING SUPPORTS
B horizontal support or width tray
PRODUCT
50
100
150
200
300
400
500
600
700
800
Page
SHOT
38
55
45
40
85
SHO 400
85
69
58
50
39
85
SVO + 2 VR8
LIGHT LOADS
270
220
200
160
130
110
85
144
127
113
102
85
73
64
57
86
150
120
100
86
67
55
46
40
86
SPL
304
254
218
192
154
128
110
96
87
SP
MEDIUM LOADS
404
351
310
277
230
196
171
151
87
SZ
429
375
333
300
250
214
188
167
87
SPD
614
550
498
455
388
338
300
269
244
223
87
IPN80
GREAT LOADS
638
557
494
444
404
370
341
88
84 SCM SUPPORTS
SCM
BASORSUPPORT
Ceiling Supports
SHO SUPPORT
DESCRIPTION SHO 400 Support SHO Supporting piece UVM ud 1 1 UVE ud 10 10 L mm 400 Fmax kg 147 Mmax Cd GS GC kg/ud kgm mm/kgm REF. kg/ud REF. 6,8 1,91 2/0969 0,66 2/0974 0,71 2/6240 0,03 2/6318 0,03
50 52 20 L+50 113 46 52 25 50 176 18 46 B+50 50 25 20 85 20x9 B+65 18 25 50 25 20x9
To mount SHO support a supporting piece is necessary. SHO support is mounted with horizontal support SHO (2 B2 bolt set with reference 2/4926 in CINCADO or 2/6792 in GC are needed) For more technical information, please consult page 211.
SHO
SHO Support
12
18
SHOT SUPPORT
DESCRIPTION SHOT 100 Support SHOT 150 Support SHOT 200 Support SHOT 300 Support SHO Supporting piece UVM ud 1 1 1 1 1 UVE ud 4 4 4 4 10 B mm 100 150 200 300 GS SWL (kg) 38 55 45 40 REF. 2/1091 2/1092 2/1093 2/1094 2/6240 kg/ud 0,48 0,52 0,58 0,70 0,03 REF. 2/1095 2/1096 2/1097 2/1098 2/6318 GC kg/ud 0,52 0,55 0,62 0,75 0,04
20 113 25 50
To mount on ceiling, a supporting piece with reference 2/6240 in GS or 2/6318 in GC is necessary. For more technical information, please consult page 211.
SHOT
SHOT Support
12
18
SVO SUPPORT
DESCRIPTION SVO 150 Support SVO 200 Support SVO 250 Support SVO 300 Support SVO 350 Support SVO 400 Support SVO 500 Support SVO 600 Support UVM ud 1 1 1 1 1 1 1 1 UVE ud 4 4 4 4 4 4 4 4 B mm 150 200 250 300 350 400 500 600 GS SWL (kg) 270 220 240 200 180 160 130 110 REF. 2/3630 2/1073 2/1074 2/1075 2/1076 2/3629 2/1077 2/5941 kg/ud 0,24 0,30 0,36 0,42 0,48 0,54 0,66 0,78 REF. 2/6280 2/1078 2/1079 2/1080 2/1081 2/5719 2/1082 2/5720 GC kg/ud 0,26 0,33 0,39 0,93 0,52 0,58 0,72 0,84
52
20X9
To mount the SVO support to ceiling, 2 VR-8 reference 2/3397 and 4 nuts reference 0/0338 are needed (product packed in bags of 100). For more technical information, please consult page 211.
SCM SUPPORTS 85
SCM
BASORSUPPORT
Ceiling Supports
PC + Wall Bracket
DESCRIPTION PC Profile Wall Bracket UVM m/ud 3 1 UVE m/ud 18 40 Fmax kg 193 Mmax kgm 19 GS REF. 2/0228 2/1116 kg/m 1,71 0,28 REF. 2/0229 2/1117 GC kg/m 1,84 0,30
71 63 7x7
For the assembly with wall bracket, 4 B1 bolt sets reference 2/4356 in GS or 2/6826 in GC are needed (product packed in bags of 100). Two types of mounting. Mounts on the open side with SR support, and on lateral side with SRB-SCR supports. For more technical information, please consult page 211.
Wall Bracket
2 35
PC Profile
58 20x7 8 20 30 30 3000
12
Wall Bracket
PC Profile
12
12
For the assembly, 2 M10 bolt sets with reference number 2/6319 in cincado or 2/6320 in I304 are needed (products packed in bags containing 100 units). Mounted on lateral side with SRB and SCR supports. For more technical information, please consult page 211.
12
43
80 131
PC Profile
58 20x7 8 20 30 30 3000
12
PC Profile
86 SCM SUPPORTS
SCM
BASORSUPPORT
Ceiling Supports
SPL SUPPORT
DESCRIPTION SPL 300 Support SPL 400 Support SPL 500 Support SPL 600 Support SPL 700 Support SPL 800 Support UVM ud 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 L mm 300 400 500 600 700 800 Fmax kg 442 442 442 442 442 442 Mmax kgm 31,4 31,4 31,4 31,4 31,4 31,4 Cd mm/kgm 0,192 0,223 0,287 0,351 0,415 0,479 CINCADO REF. kg/ud 2/6846 0,66 2/6847 1,02 2/6848 1,00 2/6849 1,40 2/6850 1,55 2/6851 1,64 GC REF. kg/ud 2/6838 0,72 2/6839 1,12 2/6840 1,10 2/6841 1,54 2/6842 1,71 1805427 1,80
14
1,5
50
Mounted on open side with supports: SRB, SCR, SPL, SHL, SP. Mounted on drilled side with supports: SRB, SCR, SHL. For more technical information, please consult page 211.
41
25x11
41
SP SUPPORT
DESCRIPTION SP 300 Support SP 400 Support SP 500 Support SP 600 Support SP 800 Support UVM ud 1 1 1 1 1 UVE ud 1 1 1 1 1 L mm 300 400 500 600 800 Fmax kg 534 534 534 534 534 Mmax kgm 49,2 49,2 49,2 49,2 49,2 Cd mm/kgm 0,142 0,203 0,265 0,326 0,509 CINCADO REF. kg/ud 2/6831 1,06 2/6832 1,31 2/6833 1,56 2/6834 1,82 2/6835 2,32 GC REF. kg/ud 2/4734 1,11 2/1036 1,38 2/1037 1,64 2/4938 1,91 2/1038 2,44
14
50
25x11
41
SZ SUPPORT
DESCRIPTION SZ 300 Support SZ 400 Support SZ 500 Support SZ 600 Support UVM ud 1 1 1 1 UVE ud 1 1 1 1 L mm 300 400 500 600 Fmax kg 556 556 556 556 Mmax kgm 54,1 54,1 54,1 54,1 Cd mm/kgm 0,224 0,259 0,345 0,483 CINCADO REF. kg/ud 2/6764 1,21 2/6765 1,45 2/6766 1,68 2/6767 1,95 GC REF. kg/ud 2/1069 1,22 2/1070 1,45 2/1071 1,69 2/1072 1,95
11 13
47 80 120 48 25x9 14 2,5 50 25x11 82 41 35
SPD SUPPORT
DESCRIPTION SPD 500 Support SPD 600 Support SPD 700 Support SPD 800 Support SPD 1000 Support UVM ud 1 1 1 1 1 UVE ud 1 1 1 1 1 L mm 500 600 700 800 1000 Fmax kg 755 755 755 755 755 Mmax kgm 95 95 95 95 95 Cd mm/kgm 0,147 0,179 0,211 0,263 0,316 GC REF. 2/6272 2/5621 2/6273 2/6274 2/4641 kg/ud 3,18 3,71 4,24 4,77 5,84
SCM SUPPORTS 87
120 160
48 L+50
50 L+50
Mounted on open side with supports: SRB, SCR, SPL, SHL, SP. Mounted on drilled side with supports: SRB, SCR, SHL.
80 120
2,5
50 L+50
80 120
SCM
BASORSUPPORT
Ceiling Supports
IPN80 SUPPORT
DESCRIPTION IPN80 600 Profile IPN80 1000 Profile IPN80 1300 Profile IPN80 1500 Profile IPN80 2000 Profile IPN80 3000 Profile IPN80 Head UVM ud 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 L mm 600 1000 1300 1500 2000 3000 Fmax kg 955 955 955 955 955 955 Mmax kgm 145 145 145 145 145 145 Cd mm/kgm 0,069 0,092 0,117 0,138 0,172 0,275 GC REF. 2/6345 2/6346 2/6347 2/6348 2/6349 2/6350 2/6056 kg/ud 3,49 5,81 7,55 7,55 11,62 17,43 1,77
80 42 L
To join to the head support 2 M10x30 reference 2/6320 in I304 are needed (products packed in bags containing 100). Mounted with SHV support.
IPN80 Profile
IPN80 Profile
68 28
100 63x13
50
13
30x12
IPN80 Head
140 200
IPN80 Head
88 SCM SUPPORTS
70 100
44 100
SCM
BASORSUPPORT
Floor Supports
SWL (kg) FLOOR SUPPORTS
B soporte horizontal ancho de la bandeja
PRODUCT
100
150
200
300
400
500
600
700
800
Page
SV
WALL-FLOOR SPACER
120
120
110
90
220
150
180
90
SP
351
310
277
230
196
171
151
90
SZ
MODULAR
375
333
300
250
214
188
167
90
SPD
550
498
455
388
338
300
269
244
223
91
IPN+HEAD
CEILING FLOOR
638
557
494
444
404
370
341
91
SCM SUPPORTS 89
SCM
BASORSUPPORT
Floor Supports
SV SUPPORTS
DESCRIPTION SV 100 Support SV 150 Support SV 200 Support SV 300 Support SV 400 Support SV 500 Support SV 600 Support UVM ud 1 1 1 1 1 1 1 UVE ud 50 40 42 60 20 20 20 B mm 100 150 200 300 400 500 600 GS SWL (kg) 120 120 110 90 220 150 180 REF. 2/1046 2/1047 2/1048 2/1049 2/3413 2/3414 2/3415 kg/ud 0,09 0,12 0,17 0,23 0,45 0,52 0,59 REF. 2/1050 2/1051 2/1052 2/1053 2/3418 2/3419 2/3420 GC kg/ud 0,10 0,13 0,19 0,25 0,48 0,56 0,64
12
35x7.5 40 B+44 B+72 40
SVO 100/150/200/300
SV 100/150/200/300
12
27 B+146
SV 400/500/600
SVO 400/500/600
SP SUPPORT
DESCRIPTION SP 300 Support SP 400 Support SP 500 Support SP 600 Support SP 800 Support UVM ud 1 1 1 1 1 UVE ud 1 1 1 1 1 L mm 300 400 500 600 800 Fmax kg 534 534 534 534 534 Mmax kgm 49,2 49,2 49,2 49,2 49,2 Cd mm/kgm 0,142 0,203 0,265 0,326 0,509 CINCADO REF. kg/ud 2/6831 1,06 2/6832 1,31 2/6833 1,56 2/6834 1,82 2/6835 2,32 GC REF. kg/ud 2/4734 1,11 2/1036 1,38 2/1037 1,64 2/4938 1,91 2/1038 2,44
41 41
14
Mounted on the open face with supports: SRB, SCR, SPL, SHL, SP. Mounts on the drilled face with supports: SRB, SCR, SHL. For more technical information, please consult page 211.
50
SZ SUPPORT
DESCRIPTION SZ 300 Support SZ 400 Support SZ 500 Support SZ 600 Support UVM ud 1 1 1 1 UVE ud 1 1 1 1 L mm 300 400 500 600 Fmax kg 556 556 556 556 Mmax kgm 54,1 54,1 54,1 54,1 Cd 0,224 0,259 0,345 0,483 CINCADO REF. kg/ud 2/6764 1,21 2/6765 1,45 2/6766 1,68 2/6767 1,95 GC REF. kg/ud 2/1069 1,22 2/1070 1,45 2/1071 1,69 2/1072 1,95
25x9
Mounted with supports: SRB, SCR, SPL, SHL. For more technical information, please consult page 211.
90 SCM SUPPORTS
48
11 13
80 120
2,5
50
40 14
40
SCM
BASORSUPPORT
Floor Supports
SPD SUPPORT
DESCRIPTION SPD 500 Support SPD 600 Support SPD 700 Support SPD 800 Support SPD 1000 Support UVM ud 1 1 1 1 1 UVE ud 1 1 1 1 1 L mm 500 600 700 800 1000 Fmax kg 755 755 755 755 755 Mmax kgm 95 95 95 95 95 Cd mm/kgm 0,147 0,179 0,211 0,263 0,316 GC REF. 2/6272 2/5621 2/6273 2/6274 2/4641 kg/ud 3,18 3,71 4,24 4,77 5,84
82 25x11 50 L+50 14 2,5 50 80 L 41
IPN80 SUPPORT
DESCRIPTION IPN80 600 Profile IPN80 1000 Profile IPN80 1300 Profile IPN80 1500 Profile IPN80 2000 Profile IPN80 3000 Profile IPN80 Head UVM ud 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 L mm 600 1000 1300 1500 2000 3000 Fmax kg 955 955 955 955 955 955 Mmax kgm 145 145 145 145 145 145 Cd 0,069 0,092 0,117 0,138 0,172 0,275 REF. 2/6345 2/6346 2/6347 2/6348 2/6349 2/6350 2/6056 GC kg/ud 3,49 5,81 6,55 7,55 11,62 17,43 1,77
For the assembly to the head support 2 M10x30 with reference 2/6320 in I304 are needed (products packed in bags containing 100). Mounted with SHV support.
IPN80 Profile
IPN80 Profile
68
13
IPN80 Head
IPN80 Head
SCM SUPPORTS 91
SCM
BASORSUPPORT
Mounts
MOUNTS
SHO400+SHO200+2B2 SPL+SCR SPL+SCR SIMPLE HEAD BRACKET + PC + SCR
Wall Bracket+PC+SR
SP+SPL+TM-10
SPD+SHR+TM-10
SZ+2SCR
SR + PC ON WALL
Beam-profile clamp page 165 41x21 profile page 154 Spring nut page 160
92 SCM SUPPORTS
SCM
BASORSUPPORT
Mounts
2SP+41x41x2,5+4182 C+TM-8
SPD+4SCR+TM-10
41x41 profile page 154 41/82C piece page 158 PVC cap page 160
41x41 profile page 154 41/82D piece page 158 Spring nut page 160
SCM SUPPORTS 93
SCM
BASORTRAY I304
5
ERE Cable Trays ERE Accessories
.................................
Page 96 Page 97
................................
BASORFIL I304
BFR Wire-mesh cable trays Union elements Accessories
.........
............................................
.........................................................
BFR Assemblies
..........................................
BASORSUPPORT I304
Supports ................................................................... Page 106
Standard I304 steel products are the most basic solutions for situations in which the environment is corrosive, such as wine cellars, food factories, facilities located near the sea, sewage water treating plants, petrochemical factories, etc.
SCM
ERE
BASORTRAY I304
Metallic Cable Trays
2 1
1 Longitudinal reinforcements to improve resistance to flexure. 2 Security edge to avoid accidents. 3 SELF-ASSEMBLY coupler system between the cable trays.
No couplers needed Easier to install Less time required for installation Union with higher degree of rigidity
4 Corners finished at 45 to improve behaviour to flexure. 5 Pressure-fixed covers. No accessories required. 6 Accessories with circular insides to avoid damaging the cables.
USEFUL AREA (cm2) B(mm) 100 150 200 300 H60 58 88 118 178
96 SCM I304
SCM
ERE
BASORTRAY I304
Metallic Cable Trays
UVM m 3 3 3 3
UVE m 24 18 12 12
H mm 60 60 60 60
For the assembly of the cable trays, no couplers are needed. Each stretch requires 4 bolts with reference number 2/4925 in I304 (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, JUER H60 couplers with reference number 2/3233 in I304 are needed For more technical information, please consult page 211.
UVM m 3 3 3 3
UVE m 24 18 12 12
H mm 60 60 60 60
10x7.5
For the assembly of the cable trays, no couplers are needed. Each stretch requires 4 bolts with reference number 2/4925 in I304 (products packed in bags containing 100 units). Should the union between the parts when cut be done at the workplace, JUER H60 couplers with reference number 2/3233 in I304 are needed. For more technical information, please consult page 211.
UVM m 3 3 3 3
UVE m 3 3 3 3
B+2
For the assembly of the cover, no accessories are needed. Its fixed by applying pressure. The cover can be self-assembled in order to improve its degree of protection (IP rating).
The horizontal bend can be assembled both from the cable trays self-assembly side and from the non-selfassembly part. Should it be assembled from the non-self-assembly part, it shall be necessary to use two JUER H60 I304 couplers with reference number 2/3233. In both cases, each bend requires the use of 4 bolts with reference number 2/4925 in I304 (products packed in bags containing 100 units).
B+2 B+161
SCM I304 97
15
SCM
ERE
BASORTRAY I304
Accessories
B+2 B+161
H+161 37,5
The vertical inside can be mounted either from the plug part or from the non-plug part. If mounted from the nonplug part is necessary to use two joints JUER H60 with reference 2/3233. In both cases, it requires the use of 4 bolts reference number 2/4925 in I304 (products packed in bags of 100).
UVM ud 1 1 1 1
UVE ud 1 1 1 1
18x7.5
R1 0
The vertical outside can be mounted either from the plug part or from the non-plug part. If mounted from the nonplug part is necessary to use two joints JUER H60 with reference 2/3233. In both cases, it requires the use of 4 bolts reference number 2/4925 in I304 (products packed in bags of 100).
98 SCM I304
15
15
SCM
ERE
BASORTRAY I304
Accessories
UVM ud 1 1 1 1
UVE ud 1 1 1 1
R1 3
Two bolts are required to fix joint plate reference number 2/4925 in I304 (products packed in bags of 100).
One bolt is required to fix divider profile every 500mm reference number 2/4925 in I304 (products packed in bags of 100).
The B1 bolt set consists of a M6x14 DIN603 mushroom head square neck bolt and a M6 DIN6923 flange nut with serration for a perfect fit.
SCM I304 99
15
SCM
BFR
BASORFIL I304
High Loads Wire-Mesh Cable Trays
1 Optimal solution for systems which dont have high load needs. 2 Maximum ventilation and cleaning of the cables. 3 Innovative design patented by BASOR which offers:
With simple manipulation based on the way in which the rods are cut, the tray can be easily moulded even with complicated changes in direction. The cuts have to be performed with asymmetrical-cut wire cutters. The cut has to be performed as near to the intersection of the steel wires as possible, in order to obtain a clean cut and a good assembly.
USEFUL AREA (cm2) B(mm) 60 100 150 200 300 400 500 600 H60 27 42 58 89 H65 23 47 75 102 157 212 267 322 H105 193 297 401 505 609
SCM
BFR
BASORFIL I304
High Loads Wire-Mesh Cable Trays
UVM m 3 3 3 3
UVE m 24 24 24 18
H mm 35 35 35 35
50
To assemble the cable trays, it is necessary to use a bolt-staple set for each of the cable trays side, with reference number 2/4915 in I304. For more technical information, please consult page 211.
L=3m
L=3m
To assemble cable trays with a width which is lower or equal to 200 mm, its necessary to use a bolt-staple set for each of the cable trays side, with reference number 2/4915 in I304. For wider cable trays, an additional bolt-staple set shall be used as a central union joint too. For more technical information, please consult page 211.
L=3m
To assemble cable trays with a width which is lower or equal to 200 mm, its necessary to use a bolt-staple set for each of the cable trays side, with reference number 2/4915 in I304. For wider cable trays, an additional bolt-staple set shall be used as a central union joint too. For more technical information, please consult page 211.
100
100
100
SCM
BFR
BASORFIL I304
Fasteners
UVM ud 100
UVE ud 100
It consists of a BF-bolt and a serrated nut DIN6923. The BF-bolt is specifically designed for BASOR to form a perfect fit between the wire trays.
PATENTED 9602521
34
UVM ud 100
UVE ud 100
76
20
SCM
BFR
BASORFIL I304
Accessories
The SSC allows fix the tray to the ceiling with a electrogalvanised M8 threated rod reference number 2/3397. At each point of attachment takes two SSC (upper and lower), a rod and two nuts M8 DIN6923, reference 0/0338 in CINCADO and 0/0927 in GC (both products packed in bags of 100). Also can be used as a fastener between wire mesh and any support with a B1 bolt set reference 2/4925 in I304.
60
9
18
6,5 0
1,20
UVM ud 100
UVE ud 1500
8x8
SL I304
DESCRIPTION SL Support UVM ud 10 UVE ud 100 I304 REF. kg/ud 2/0375 0,13
60
Allows attachment to wall BASORFIL trays. Used with models 60x65 and 100x65.
87 101
13
STB I304
DESCRIPTION STB UVM ud 1 UVE ud 1 I304 REF. kg/ud 2/0376 0,14
81 23,5 21 14
Allows the fixation of conduits to the cables outlet. You can see section cable management systems insulation conduit.
29
UVM ud 1
UVE ud 1
127
5
25
18X7.5
40 86 104
25
80
40
SCM
BFR
BASORFIL I304
Accessoreos
7,50
15
SIMPLE SL I304
DESCRIPTION SL Simple UVM ud 1 UVE ud 1 I304 REF. kg/ud 2/0380 0,05
12x8
For wall mounting is used with a 60x65 and 100x65 models only. When mounted with threaded rod is necessary to take both sides of the tray. In this case the maximum width of tray is 200, being valid the heights 65 and 105 only.
30
18x7.5
19
25 67 103
This piece allows to fix the BASORFIL trays to wall or ceiling, in this case with threaded rod.
25 83
25
UVM ud 1
UVE ud 1
6,5 0
SCM
BFR
BASORFIL I304
Montajes
To reinforce the accessorie can be used pieces of multijunction with basorfil bolts
To reinforce the accessorie can be used pieces of multijunction with basorfil bolts
To reinforce the accessorie can be used pieces of multijunction with basorfil bolts
T INTERSECTION
BFR+PS+B1+BF STAPLE
BFR+SCR+BF BOLT
BFR+2SL+2VR8+NUTS
BFR+SVO+VR8+SSC+B1
SL
SVO page 107 Threaded rod VR8 and nut- page 166 B1 bolt set page 99
SCM
BASORSUPPORT I304
Wall, Floor and Ceiling Supports
SWL (kg) WALL SUPPORTS
PRODUCT
50
100
150
500
600
750
Pgina
SCR
75
75
75
75
65
65
65
55
65
107
SV
120
120
110
90
107
SVO
270
220
200
160
130
110
107
WALL BRACKET + PC
144
127
113
102
85
73
64
57
107
SCM
BASORSUPPORT I304
Wall, Floor and Ceiling Supports
86 36
20
20x8
25x7.5
35x7.5
45
B+50
50
50-400
122 37
20
12
12x8
34
20x8
18x7.5 40
35x7.5 50
B+50
50-750
SV SUPPORT I304
DESCRIPTION SV 100 Support SV 150 Support SV 200 Support SV 300 Support UVM ud 1 1 1 1 UVE ud 50 40 42 60 B mm 100 150 200 300 SWL (kg) 120 120 110 90 I304 REF. kg/ud 2/1062 0,10 2/1063 0,13 2/1064 0,19 2/1065 0,25
12
35x7.5 40 B+44 B+72 40
To mount the SVO support to ceiling, 2 VR-8 reference 2/3397 and 4 nuts reference 0/0338 are needed (product packed in bags of 100). For more technical information, please consult page 211.
B+50
8
50
8
20x8 20x8 120 40 14 12 2 35 58 20x7 8 20 30 30
12
For the assembly with wall bracket, 4 B1 bolt sets with reference 2/4925 in I304 are needed (product packed in bags of 100). For more technical information, please consult page 211.
PC I304
DESCRIPTION PC Profile UVM m 3 UVE m 18 I304 REF. 2/5701 kg/m 1,84
For the assembly with wall bracket, 4 B1 bolt sets with reference 2/4925 in I304 are needed (product packed in bags of 100). For more technical information, please consult page 211.
3000
25
SCM
BASORTRAY AL
U with thickness of 2 mm
...........
Page 110
BASORTRAV AL6063 T6
F ............................................................................................. Page 111 U ........................................................................................... Page 111
The solutions which BASOR present in Aluminium are ideal for petrochemical industries, thanks to their great resistance to chemical and atmospheric corrosion.
SCM
AL
BASORTRAY
Aluminium
UVM m 3 3 3 3 3
UVE m 3 3 3 3 3
H mm 30 30 30 30 30
e mm 2 2 2 2 2
AL REF. 2/0622 2/0623 2/0624 2/0625 2/0626 kg/m 0,59 0,86 1,13 1,40 1,94
B 25x9 50 35x9 100 H e
This product is manufactured under order. For additional information, please contact our commercial department.
L=3m
This product is manufactured under order. For additional information, please contact our commercial department.
L=3m
This product is manufactured under order. For additional information, please contact our commercial department.
UVM m 3 3 3 3 3
UVE m 3 3 3 3 3
H mm 30 30 30 30 30
AL REF. 2/0712 2/0713 2/0714 2/0715 2/0716 kg/m 0,74 1,08 1,42 1,76 2,43
B 25x9 50 35x9 100 H e
This product is manufactured under order. For additional information, please contact our commercial department.
110 SCM AL
SCM
AL
BASORTRAY / BASORTRAV
Aluminium
L=3m
This product is manufactured under order. For additional information, please contact our commercial department.
L=3m
This product is manufactured under order. For additional information, please contact our commercial department.
UVM m 3 3 3 3
UVE m 3 3 3 3
e mm 2 2 2 2
AL 6063 T6 REF. kg/m 2/4523 1,63 2/4524 1,69 2/5960 1,75 2/4525 1,87
3000
15 B 25x8 40 27 19 B 27
This product is manufactured under order. For additional information, please contact our commercial department.
UVM m 6 6 6 6 6
UVE m 6 6 6 6 6
AL 6063 T6 REF. kg/m 2/6352 4,61 2/4434 4,83 2/4433 5,05 2/4502 5,26 2/4432 5,70
6000
This product is manufactured under order. For additional information, please contact our commercial department.
11
SCM AL 111
5 10
1. BPI Non-perforated cable tray 2. BPI Perforated cable tray 3. BPI Horizontal bend 4. BPI Vertical inside 5. BPI Vertical outside 6. SHG Support 7. Adjustable joint 8. Angle joint 9. PDBPI Intersection piece 10. SVO + VR8 Support
SCP
BASORPLAST
BASORPLAST BPB PVC domestic minitrunkings
.................................
Page 114
BASORPLAST BPI Industrial PVC cable trays and trunkings ..... Page 116 BASORPLAST Assemblies ............................................ Page 123
BASORSUPPORT SCP
SCP Supports ............................................................................... Page 124
The BASORPLAST cable tray family is manufactured in extruded PVC, using raw materials of the best quality. BASORPLAST includes two types of trunkings devoted both for domestic and industrial use. These cable trays can be used in all kinds of interior facilities, as they behave perfectly under any atmospheric conditions and are very light in weight.
PVC
SCP
BPB
BASORPLAST
PVC Domestic Minitrunkings
The BASORPLAST BPB family is the range of minitrunkings for small superficial systems. They are mainly used in the domestic sector.
SCP
BPB
BASORPLAST
PVC Domestic Minitrunkings
L=2m
L=2m
L=2m
SCP
BPI
BASORTRAY
PVC Cable Trays
Non-flammable component, with M1 fire rating according to Standard UNE 23727:1990. Electrical safety, non-conductive and without continuity characteristic cable trays.
1 Alveolar structure (BASE 200 mm)
Greater relationship between resistance to flexure / weight. Greater breaking tension. Less weight Easier to assemble, transport and manipulate.
USEFUL AREA (cm2) B (mm) 100 150 200 300 400 600 H60 52 80 93 143 H100 169 259 349 529
SCP
BPI
BASORPLAST
Industrial PVC Cable Trays and Trunkings
UVM m 3 3 3 3
UVE m 24 24 12 12
H mm 60 60 60 60
B 50
22x7.5
9
Each stretch requires two H60 couplers, with reference number 2/2061 and four bolt sets with reference number 2/6467 (products packed in bags containing 50 units). For more technical information, please consult page 211.
B 100/150
H 22,5 50 B 50 75 50
22 x7 .5
75
L=3m B 200/300
25,5
B 200/300
UVM m 3 3 3 3
UVE m 24 24 12 12
H mm 60 60 60 60
B 22,5 50
To assemble the cable tray, its necessary to use couplers. Each stretch requires two H60 couplers, with reference number 2/2061 and four bolt sets with reference number 2/6467 (products packed in bags containing 50 units). For more technical information, please consult page 211.
B 100/150
9
B 25,5 50
L=3m B 200/300
B 200/300
UVM m 3 3 3 3
UVE m 12 6 6 6
B 50 22X7.5
9
To assemble the cable tray, its necessary to use couplers. Each stretch requires two H100 couplers, with reference number 2/2062 and eight bolt sets with reference number 2/6467 (products packed in bags containing 50 units).
50 50 42
75
SCP
BPI
BASORPLAST
Industrial PVC Cable Trays and Trunkings
UVM m 3 3 3 3
UVE m 12 6 6 6
B
9
To assemble the cable tray, its necessary to use couplers. Each stretch requires two H100 couplers, with reference number 2/2062 and 8 bolt sets with reference number 2/6467 (products packed in bags containing 50 units).
50 50 42
L=3m
50
H60
9
H 50 50 B C
Each stretch requires 2 couplers (ref. 2/2061 for H60 or ref.2/2062 for H100) and 4 (8 for H100) bolt sets with reference number 2/6467 (products packed in bags containing 50 units). The accessories have the same structure than their model corresponding.
H100
42
22,5
SCP
BPI
BASORPLAST
Accessories
No accessories required for mounting. Pressure-fixed covers. The accessories have the same structure than their model corresponding.
Each stretch requires 2 couplers (ref. 2/2061 for H60 or ref.2/2062 for H100) and 4 (8 for H100) bolt sets with reference number 2/6467 (products packed in bags containing 50 units). The accessories have the same structure than their model corresponding.
C
22,5 50
H100
No accessories required for mounting. Pressure-fixed covers. The accessories have the same structure than their model corresponding.
200
9
50
SCP
BPI
BASORPLAST
Accessories
22,5
Each stretch requires 2 couplers (ref. 2/2061 for H60 or ref.2/2062 for H100) and 4 (8 for H100) bolt sets with reference number 2/6467 (products packed in bags containing 50 units). The accessories have the same structure than their model corresponding.
H
H60
50 50 42 B
H100
50
No accessories required for mounting. Pressure-fixed covers. The accessories have the same structure than their model corresponding.
DD
12 X8
20 B 65
To mount the end cover 2 bolt sets with reference 2/6467 are needed (product packed in bags containing 50 units).
SCP
BPI
BASORPLAST
Accessories
25
25
To mount the divider 4 bolt sets with reference 2/6467 are needed for each stretch (product packed in bags containing 50 units).
H60
H100
Para montar la derivacin es necesario utilizar mnimo 4 tornillos referencia 2/6467 (Product embalado en bolsas de 50) por pieza.
75
25x8 H-19 250
22x7.5
25
To mount the joint H60 2 bolt sets with reference 2/6467 are needed (product packed in bags containing 50 units). To mount the joint H100 4 bolt sets with reference 2/6467 are needed (product packed in bags containing 50 units).
BPI JU 60
25
50
BPI JU 100
28
X8
SCP
BPI
BASORPLAST
Accessories
ARTICULATED JOINT
DESCRIPTION UABPI H60 Joint UABPI H100 Joint UVM ud 1 1 UVE ud 60 60 H mm 60 100 I304 REF. kg/ud 2/5036 0,09 2/5037 0,16
18,5 DD12x8
13
To mount the joint 4 bolt sets with reference 2/6467 are needed (product packed in bags containing 50 units).
UA BPI 60
DD12x8
13
UA BPI 100
ANGLE JOINT
DESCRIPTION UBBPI H60 Joint UBBPI H100 Joint UVM ud 1 1 UVE ud 60 60 H mm 60 100 I304 REF. kg/ud 2/3520 0,13 2/5038 0,22
40x9 H-20 50 32,5
250
To mount the joint 4 bolt sets with reference 2/6467 are needed (product packed in bags containing 50 units).
40x9
BPI JUB 60
50 32,5
H-28
250
M8 PVC BOLT
DESCRIPTION PACK 50 M8 PVC BOLT SET UVM ud 1 UVE ud 1 PVC REF. kg/ud 2/6467 0,4
18
M8
The M8 PVC bolt set consists of a M8 mushroom head bolt and flange nut with serration, both in PVC.
22
H28
H20 0 14 115
5 11 0 10 15 50 15 65
SCP
BPI
BASORPLAST
Mounts
BPI MOUNTS
BPI + COVER JOINT PLATE H60 JOINT PLATE H100 BPI HORIZONTAL BEND
SCP
BPI
BASORSUPPORT
Supports
SWL (kg) WALL SUPPORT
Product
50
100
150
500
600
750
Page
SHG
90
105
120
130
125
SCR
70
70
70
70
70
70
70
60
60
125
WALL BRACKET+PC
150
120
100
86
67
55
46
40
125
SVO
270
220
200
160
130
110
126
SV
120
120
110
90
126
SCP
BPI
BASORSUPPORT
Supports
SHG SUPPORT
DESCRIPTION SHG 100 Support SHG 150 Support SHG 200 Support SHG 300 Support UVM ud 1 1 1 1 UVE ud 60 10 10 10 B mm 100 150 200 300 PVC SWL (kg) 90 105 120 130 REF. 2/6779 2/6780 2/6781 2/6782 kg/ud 0,19 0,27 0,34 0,54
14
14
50
15
50
15
5 15 50 15 6 110
15
50
15
98
110
110
14
20
80
13x9 58x9
80
11
22
13x9
58x9
80
13x9
19x11 58x9
22
19x11
19x11
80
13x9 58x9 80 35
19x11
80
35
80 35
35 50 214
89 57 162
90 265
70
170 363
SHG100
SHG150
SHG200
SHG300
GSE
12
20x8
25x7.5
35x7.5
45
B+50
50
50-400
122 37
20
12
12x8
34
20x8
18x7.5 40
35x7.5 50
B+50
500-750
20x8
120 40
To mount the wall bracket 4 bolt sets with reference 2/4925 in I304 are needed (product packed in bags containing 100 units). For more technical information, please consult page 211.
20x8 14 12
GREY PC PROFILE
DESCRIPTION GREY PC PROFILE UVM m 3 UVE m 18 GSE REF. 2/0232 kg/m 1,86
35 2
58 20x7
To mount the the profile with the wall bracket 4 bolt sets with reference 2/4925 in I304 are needed (product packed in bags containing 100 units). For more technical information, please consult page 211.
3000 30
20 30
12
SCP
BPI
BASORSUPPORT
Supports
To mount the SVO on ceiling 2 treaded rods VR-8 (ref. 2/3397) and 4 nuts (ref. 0/0338) are needed (product packed in bags containing 100 units). For more technical information, please consult page 211.
GREY SV SUPPORT
DESCRIPTION SV Support 100 SV Support 150 SV Support 200 SV Support 300 UVM ud 1 1 1 1 UVE ud 50 40 42 60 B mm 100 150 200 300 GSE SWL (kg) 120 120 110 90 REF. 2/1058 2/1059 2/1060 2/1061 kg/ud 0,14 0,18 0,21 0,28
12
35x7.5 40 B+44 B+72 40
To mount the SV 2 bolt sets with reference 2/4925 in I304 are needed (product packed in bags containing 100 units). For more technical information, please consult page 211.
SCP
BPI
BASORSUPPORT
Supports
2 5
1. BASORCANAL CT 2. CPT Horizontal bend 3. CCCT as a vertical inside 4. CCCT as a vertical outside 5. CDT Junction box 6. TF end cover 7. TC Solid cover 9. SV Support (Green)
SCE
BASORCANAL CT
9
BASORCANAL CT................................................................... Page 130 BASORCANAL ASSEMBLIES ............................... Page 135
BASORSUPPORT SCE
SCE SUPPORTS ...................................................................... Page 136
BASORCANAL is the ideal solution for those places where there is a need to install completely sealed cable trays capable of maintaining electrical cables isolated in order to avoid accidents from happening. These cable trays are covered in green Epoxypolyester resin. 3 6 BASOR ELECTRIC is the only company in Spain which has an IP65* certificate, which is obtained thanks to the Buprene joint which allows this cable tray to be completely sealed. BASOR ELECTRIC recommends installing these cable trays in industries which deal with wood, food, ceramics, paper, cardboard, paint, etc. due to environmental reasons or to the danger posed by the products manipulated therein. These cable trays are also installed inside big machinery.
*IP65 Certificate: Complete protection against entry of dust and protection from a low pressure jet of water in any direction.
GSE
SCE
BASORCANAL
Trunkings
CT
Cable tray system with an IP65 degree of protection if a buprene joint is used in all joints elements. Should the system be assembled without buprene joints, the sealing degree would be equivalent to IP53.
1 Longitudinal reinforcements to improve Resistance to flexure. 2 Pressure-fixed covers with M4 bolts to avoid accidental accesses. 3 Cover with self-assembly system which gives it a higher sealing degree. 4 Inside wing which confers it a greater resistance to flexure. 5 U-shaped joint which gives the system a higher sealing degree and improves its resistance to
flexure.
6 Corners finished at 45. 7 Accessories with circular insides to avoid damaging the cables.
USEFUL AREA (cm2) B(mm) 80 120 140 200 300 400 600 H40 30 46 H60 70 H80 110 158 H100 198 298 397 597
130 SCE CT
SCE
CT
BASORCANAL
Trunkings
CT H40 TRUNKING
DESCRIPTION CT 40X80 CT 40X120 UVM m 3 3 UVE m 12 12 B mm 80 120 H mm 40 40 IK 10 10 IP 65 65 A cm2 30 46 GSE (Green) T Min T Max C C kg/m REF. -45 120 2/0151 1,72 -45 120 2/0152 2,19
B H = = 3000 12 7.5x7.5 = = B 3000 12 7.5x7.5 H = = B 3000 12 7.5x7.5 H = = B 3000 12 7.5x7.5
L=3m
To assemble the trunking, its necessary to use a joint. Each stretch requires one joint of the appropriate model, six bolts with reference number 2/4356 (product packed in bags containing 100 units) and six bolts with reference number 2/6818 (product packed in bags containing 100 units). For more technical information, please consult page 211.
CT H60 TRUNKING
DESCRIPTION CT 60x120 UVM m 3 UVE m 12 B mm 120 H mm 60 IK 10 IP 65 A cm2 70 GSE (Green) T Min T Max C C kg/m REF. -45 120 2/0153 2,44
H
To assemble the trunking, its necessary to use a joint. Each stretch requires one joint of the appropriate model, six bolts with reference number 2/4356 (product packed in bags containing 100 units) and six bolts with reference number 2/6818 (product packed in bags containing 100 units).
L=3m
CT H80 TRUNKING
DESCRIPTION CT 80x140 CT 80x200 UVM m 3 3 UVE m 6 6 B mm 140 200 H mm 80 80 IK 10 10 IP 65 65 A cm2 110 158 GSE (Green) T Min T Max C C kg/m REF. -45 120 2/0154 2,93 -45 120 2/0155 4,23
L=3m
To assemble the trunking, its necessary to use a joint. Each stretch requires one joint of the appropriate model, six bolts with reference number 2/4356 (product packed in bags containing 100 units) and six bolts with reference number 2/6818 (product packed in bags containing 100 units). For more technical information, please consult page 211.
CT H100 TRUNKING
DESCRIPTION CT 100x200 CT 100x300 CT 100x400 CT 100x600
L=3m
UVM m 3 3 3 3
UVE m 6 6 3 3
IK 10 10 10 10
IP 65 65 65 65
T Min T Max C C -45 120 -45 120 -45 120 -45 120
GSE (Green) REF. 2/0156 2/0157 2/5908 2/0160 kg/m 4,54 5,88 7,6 16,86
To assemble the trunking, its necessary to use a joint. Each stretch requires one joint of the appropriate model, six bolts with reference number 2/4356 (product packed in bags containing 100 units) and six bolts with reference number 2/6818 (product packed in bags containing 100 units). For more technical information, please consult page 211.
SCE CT 131
SCE
BASORCANAL
Accessories
CT
6,5
R82
61 B+143
CPT H40/60
CPT requires a joint according to model. A joint and 6 bolt sets with reference 2/4356 are needed (products packed in bags containing 100 units).
6,5 B
R8
B+143
61
CPT H80/100
R8 2
8x8 H
H+142
CCCT H40/60/80
CCCT requires a joint according to model. A joint and 6 bolt sets with reference 2/4356 are needed (products packed in bags containing 100 units).
73
R8 2
8x8
H+154
CCCT H100
132 SCE CT
SCE
CT
BASORCANAL
Accessories
CDT requires AC coupler according to model. When trunking isnt being conected to one of the CDT junction box sides a TC solid cover must be used to seal the box. And 2 bolt sets with reference 2/4356 are needed (products packed in bags containing 100 units).
TC SOLID COVER
H+19
UVM ud 1 1 1 1 1 1
UVE ud 1 1 1 1 1 1
GSE (Green) REF. 2/0223 2/0224 2/0225 2/0226 2/4866 2/5931 kg/ud 0,05 0,06 0,21 0,30 0,40 0,58
B+25
To mount TC solid cover 2 bolt sets with reference 2/4356 are needed (products packed in bags containing 100 units).
END COVER
DESCRIPTION TF 40X80 TF 40X120 TF 60X120 TF 80X140 TF 80X200 TF 100X200 TF 100X300 TF 100X400 TF 100X600 UVM ud 1 1 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 1 1 B mm 80 120 120 140 200 200 300 400 600 H mm 40 40 60 80 80 100 100 100 100 GSE (Green) REF. 2/0213 2/0214 2/0215 2/0216 2/0217 2/0218 2/0219 2/0220 2/0222 kg/ud 0,07 0,10 0,10 0,14 0,23 0,23 0,46 0,47 0,68
DD12x8 H-3 B-3 DD 12x8 H-5 29,5 B-5
To mount end cover 2 bolt sets with reference 2/4356 are needed (products packed in bags containing 100 units).
AC COUPLER CDT40
DESCRIPTION AC 40/40X80 AC 40/40X120 UVM ud 1 1 UVE ud 1 1 B mm 80 120 H mm 40 40 GSE (Green) REF. 2/0195 2/0196 kg/ud 0,085 0,115
6,50
To mount AC coupler 5 bolt sets with reference 2/4356 are needed (products packed in bags containing 100 units).
SCE CT 133
SCE
CT
BASORCANAL
Accessories
AC COUPLER CDT60
DESCRIPTION AC 60/40X80 AC 60/40X120 AC 60/60X120 UVM ud 1 1 1 UVE ud 1 1 1 GSE (Green) REF. 2/0197 2/0198 2/0199 kg/ud 0,13 0,17 0,13
DD 12x8
H-5
29,5
B-5
6,50
To mount AC coupler 5 bolt sets with reference 2/4356 are needed (products packed in bags containing 100 units).
AC COUPLER CDT80
DESCRIPTION AC 80/40X80 AC 80/40X120 AC 80/60X120 AC 80/80X140 AC 80/80X200 UVM ud 1 1 1 1 1 UVE ud 1 1 1 1 1 GSE (Green) REF. 2/0200 2/0201 2/0202 2/0203 2/0204 kg/ud 0,17 0,24 0,25 0,25 0,21
DD 12x8
H-5
29,5
B-5
6,50
To mount AC coupler 5 bolt sets with reference 2/4356 are needed (products packed in bags containing 100 units).
AC COUPLER CDT100
DESCRIPTION AC 100/40X80 AC 100/40X120 AC 100/60X120 AC 100/80X140 AC 100/80X200 AC 100/100X200 AC 100/100X300 AC 100/100X400 AC 100/100X600 UVM ud 1 1 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 1 1 GSE (Green) REF. 2/0205 2/0206 2/0207 2/0208 2/0209 2/0210 2/0211 2/0212 2/4867 kg/ud 0,37 0,24 0,38 0,31 0,44 0,37 0,76 0,39 0,54
DD 12x8
H-5
29,5
B-5
6,50
To mount AC coupler 5 bolt sets with reference 2/4356 are needed (products packed in bags containing 100 units).
JUCT JOINT
DESCRIPTION JUCT 40X80 JUCT 40X120 JUCT 60X120 JUCT 80X140 JUCT 80X200 JUCT 100X200 JUCT 100X300 JUCT 100X400 JUCT 100X600 UVM ud 1 1 1 1 1 1 1 1 1 UVE ud 1 1 1 1 1 1 1 1 1 GS REF. 2/0181 2/0182 2/0183 2/0184 2/0185 2/0186 2/0187 2/5907 2/0190 kg/ud 0,06 0,08 0,1 0,12 0,15 0,17 0,22 0,28 0,54
B 15 30 H 18X7.5 DD12x8
JUCT H80/120/140
30 18X7.5
15
To mount JUCT 6 bolt sets with reference 2/4356 are needed (products packed in bags containing 100 units).
B
DD12x8
JUCT H200/300/400
134 SCE CT
SCE
CT
BASORCANAL
Accessories
8, 6
10
B1 BOLT SET
DESCRIPTION Pack 100 B1 Bolt Set M6x14 UVM ud 1 UVE ud 1 Pap Nm 6 CINCADO REF. kg/ud 2/4356 1,00
The B1 bolt set consists of a M6x14 DIN603 mushroom head square neck bolt and a M6 DIN6923 flange nut with serration for a perfect fit. Used to mount all accessories from the BASORCANAL series.
14
14
BUPRENE JOINT
DESCRIPTION BUPRENE JOINT UVM m 10 UVE m 10 BUPRENE REF. 2/0227 kg/m 0,03
The buprene joint is necessary to obtain IP65 degree of protection. Should be used in all elements of union.
BASORCANAL MOUNTS
JUCT JOINT CPT HORIZONTAL BEND CCCT VERTICAL AC COUPLER
END COVER
TRUNKING + SV SUPPORT
SV - page 137
SCE CT 135
SCE
BASORCANAL
Supports
SWL (kg) WALL SUPPORTS
CT
PRODUCT
50
100
150
500
600
750
Page
SCR
70
70
70
70
70
70
70
60
60
137
WALL BRACKET+PC+SCR
150
120
100
86
67
55
46
40
137
SV
120
120
110
90
137
136 SCE CT
SCE
CT
BASORCANAL
Supports
86 36
20
20x8
25x7.5
35x7.5
45
B+50
50
50-400
122 37
20
12
12x8
34
20x8
18x7.5 40
35x7.5 50
B+50
500-750
GREEN PC PROFILE
DESCRIPTION PC 3000 Profile WALL BRACKET Green UVM m/ud 3 1 UVE m/ud 18 40 L mm 3000 GSE (Green) REF. kg/ud 2/0230 2,05 2/1118 0,27
2 35
58 20x7 8 30 3000
PC profile PC profile
63
30
12
To mount wall bracket with the PC profile 4 bolt sets reference 2/4356 are needed (products packed in bags containing 100).
20
7x7
71
20x8 20x8
Wall bracket
120 40
14 12
Wall bracket
GREEN SV SUPPORT
DESCRIPTION SV 100 Support SV 150 Support SV 200 Support SV 300 Support UVM ud 1 1 1 1 UVE ud 50 40 42 60 B mm 100 150 200 300 SWL (kg) 120 120 110 90 GSE (Green) REF. kg/ud 2/1054 0,10 2/1055 0,12 2/1056 0,19 2/1057 0,25
12
40 35x7.5 40 B+44 B+72
SCE CT 137
SBT
Page 141
RE1250 and R1250 rigid conduits can be used in all kinds of superficial electrical systems with a minimum compression strength of 1250N. FLEXL flexible conduits have been designed to protect cables in robots, spinning tables, solar trackers and, generally speaking, machines which are in constant movement.
SBT
BASORTUB
Rigid Conduits
The range of BASORTUB RE1250 RLH7035 selfassembly products has a service temperature of between -5 and 90 C, an IP54 degree of protection, a minimum compression strength of 1250N and a minimum impact resistance of 6J to -5 C. Its dielectric rigidity is higher than 2000 V and its insulating resistance is higher than 100 MOhm. Its classification, according to Standard IEC 61386 is 44221254010. The range of BASORTUB RE1250 PVC7035 selfassembly products has a service temperature of -5 to 60 C, an IP54 degree of protection, a minimum compression strength of 1250N and a minimum impact resistance of 2J to -5 C. Its dielectric rigidity is higher than 2000 V and its insulating resistance is higher than 100 MOhm. Its classification, according to Standard IEC 61386 is 43211254010.
140 SBT
SBT
BASORTUB
Halogen-Free Accessories
UVM ud 10 10 10 10 5 5 UVE ud 10 10 10 10 5 5 DN mm 16 20 25 32 40 50 63 IP 40 40 40 40 40 40 40 RLH7035 REF. 2/6732 2/6733 2/6734 2/6735 2/6736 2/6737 2/6738 kg/ud 0,01 0,01 0,01 0,02 0,03 0,04 0,05
SBT 141
SBT
BASORFLEX
Flexible Conduits
BASORTUB FLEX nylon products (PA6, PA6V0 and PA12) are self-extinguishing, highly fire resistant, have a low level of smoke, a low toxicity and are halogen, sulphur and phosphate-free. They are ideal for protecting conductors in flexible electrical systems in industrial and tertiary sectors. Its classification, according to Standard IEC 61386 is 2432.
142 SBT
SBT
BASORFLEX
Polyamide Accessories
RFLEX PG CONNECTOR
DESCRIPTION RFLEX 10PG07 CONNECTOR RFLEX 13PG09 CONNECTOR RFLEX 16PG11 CONNECTOR RFLEX 16PG13 CONNECTOR RFLEX 18PG13 CONNECTOR RFLEX 21PG13 CONNECTOR RFLEX 21PG16 CONNECTOR RFLEX 28PG21 CONNECTOR RFLEX 34PG29 CONNECTOR RFLEX 42PG36 CONNECTOR RFLEX 54PG48 CONNECTOR UVM ud 10 10 10 10 10 10 10 10 10 2 2 UVE ud 10 10 10 10 10 10 10 10 10 2 2 Dext Thread mm PG UNE-EN 61386 10 7 1353 13 9 1353 16 11 1353 16 13 1353 18 13 1353 21 13 1353 21 16 1353 28 21 1353 34 29 1353 42 36 1353 54 48 1353 Rcomp Rimp N J 125 2 125 2 125 2 125 2 125 2 125 2 125 2 125 2 125 2 125 2 125 2 Tmin C -45 -45 -45 -45 -45 -45 -45 -45 -45 -45 -45 Tmax C 105 105 105 105 105 105 105 105 105 105 105 PA6-7016 REF. 2/6597 2/6598 2/6599 2/6600 2/6601 2/6602 2/6603 2/6604 2/6605 2/6606 2/6607 kg/ud 0,004 0,007 0,010 0,010 0,012 0,012 0,012 0,027 0,033 0,060 0,085 PA6-9011 REF. 2/6608 2/6609 2/6610 2/6611 2/6612 2/6613 2/6614 2/6615 2/6616 2/6617 2/6618 kg/ud 0,004 0,007 0,010 0,010 0,012 0,012 0,012 0,027 0,033 0,060 0,085
RFLEX M CONNECTOR
DESCRIPTION RFLEX 10M12 CONNECTOR RFLEX 13M16 CONNECTOR RFLEX 16M16 CONNECTOR RFLEX 16M20 CONNECTOR RFLEX 18M20 CONNECTOR RFLEX 21M20 CONNECTOR RFLEX 28M25 CONNECTOR RFLEX 34M32 CONNECTOR RFLEX 42M40 CONNECTOR RFLEX 54M50 CONNECTOR RFLEX 54M63 CONNECTOR Included nut. UVM ud 10 10 10 10 10 10 10 10 2 2 2 UVE ud 10 10 10 10 10 10 10 10 2 2 2 Dext Thread mm M UNE-EN 61386 10 12 1353 13 16 1353 16 16 1353 16 20 1353 18 20 1353 21 20 1353 28 25 1353 34 32 1353 42 40 1353 54 50 1353 54 63 1353 Rcomp Rimp N J 125 2 125 2 125 2 125 2 125 2 125 2 125 2 125 2 125 2 125 2 125 2 Tmin C -45 -45 -45 -45 -45 -45 -45 -45 -45 -45 -45 Tmax C 105 105 105 105 105 105 105 105 105 105 105 PA6-7016 REF. 2/6639 2/6640 2/6641 2/6642 2/6643 2/6644 2/6645 2/6646 2/6647 2/6648 2/6649 kg/ud 0,01 0,01 0,01 0,02 0,02 0,02 0,03 0,04 0,07 0,10 0,10 PA6-9011 REF. 2/6650 2/6651 2/6652 2/6653 2/6654 2/6655 2/6656 2/6657 2/6658 2/6659 2/6660 kg/ud 0,01 0,01 0,01 0,02 0,02 0,02 0,03 0,04 0,07 0,10 0,10
RFLEX 90 PG CONNECTOR
DESCRIPTION RFLEX90 10PG07 CONNECTOR RFLEX90 13PG09 CONNECTOR RFLEX90 16PG11 CONNECTOR RFLEX90 16PG13 CONNECTOR RFLEX90 21PG13 CONNECTOR RFLEX90 21PG16 CONNECTOR RFLEX90 28PG21 CONNECTOR RFLEX90 34PG29 CONNECTOR RFLEX90 42PG36 CONNECTOR RFLEX90 54PG48 CONNECTOR UVM ud 10 10 10 10 10 10 10 5 2 2 UVE ud 10 10 10 10 10 10 10 5 2 2 Dext Thread mm PG 10 7 13 9 16 11 16 13 21 13 21 16 28 21 34 29 42 36 54 48 Rcomp N 125 125 125 125 125 125 125 125 125 125 Rimp J 2 2 2 2 2 2 2 2 2 2 Tmin C -45 -45 -45 -45 -45 -45 -45 -45 -45 -45 PA6-7016 Tmax C Referencia kg/ud 105 2/6619 0,01 105 2/6620 0,02 105 2/6621 0,02 105 2/6622 0,02 105 2/6623 0,02 105 2/6624 0,02 105 2/6625 0,04 105 2/6626 0,06 105 2/6627 0,10 105 2/6628 0,15 PA6-9011 Referencia 2/6629 2/6630 2/6631 2/6632 2/6633 2/6634 2/6635 2/6636 2/6637 2/6638 kg/ud 0,01 0,02 0,02 0,02 0,02 0,02 0,04 0,06 0,10 0,15
SBT 143
SBT
BASORFLEX
Polyamide Accessories
RFLEX 90 M CONNECTOR
DESCRIPTION RFLEX90 10M12 CONNECTOR RFLEX90 13M16 CONNECTOR RFLEX90 16M16 CONNECTOR RFLEX90 16M20 CONNECTOR RFLEX90 21M20 CONNECTOR RFLEX90 28M25 CONNECTOR RFLEX90 34M32 CONNECTOR RFLEX90 42M40 CONNECTOR RFLEX90 54M50 CONNECTOR RFLEX90 54M63 CONNECTOR Included nut. UVM ud 10 10 10 10 10 10 5 2 2 2 UVE ud 10 10 10 10 10 10 5 2 2 2 Dext Thread mm M 10 12 13 16 16 16 16 20 21 20 28 25 34 32 42 40 54 50 54 63 Rcomp N 125 125 125 125 125 125 125 125 125 125 Rimp J 2 2 2 2 2 2 2 2 2 2 Tmin C -45 -45 -45 -45 -45 -45 -45 -45 -45 -45 Tmax C 105 105 105 105 105 105 105 105 105 105 PA6-7016 REF. 2/6661 2/6662 2/6663 2/6664 2/6665 2/6666 2/6667 2/6668 2/6669 2/6670 kg/ud 0,01 0,02 0,02 0,02 0,02 0,04 0,06 0,10 0,15 0,16 PA6-9011 REF. 2/6671 2/6672 2/6673 2/6674 2/6675 2/6676 2/6677 2/6678 2/6679 2/6680 kg/ud 0,01 0,02 0,02 0,02 0,02 0,04 0,06 0,10 0,15 0,16
RFLEX 45 PG CONNECTOR
DESCRIPTION RFLEX45 16PG11 CONNECTOR RFLEX45 16PG13 CONNECTOR RFLEX45 21PG16 CONNECTOR RFLEX45 28PG21 CONNECTOR RFLEX45 34PG29 CONNECTOR UVM ud 50 50 50 50 10 UVE ud 50 50 50 50 10 Dext Thread mm PG 16 11 16 13 21 16 28 21 34 29 PA6-7016 REF. 2/6709 2/6710 2/6711 2/6712 2/6713 kg/ud 0,02 0,02 0,02 0,03 0,05 PA6-9011 REF. 2/6714 2/6715 2/6716 2/6717 2/6718 kg/ud 0,02 0,02 0,02 0,03 0,05
RFLEX 45 M CONNECTOR
DESCRIPTION RFLEX45 16M16 CONNECTOR RFLEX45 16M20 CONNECTOR RFLEX45 21M20 CONNECTOR RFLEX45 28M25 CONNECTOR RFLEX45 34M32 CONNECTOR Included nut. UVM ud 50 50 50 50 10 UVE ud 50 50 50 50 10 Dext Thread mm M 16 16 16 20 21 20 28 25 34 32 PA6-7016 REF. 2/6719 2/6720 2/6721 2/6722 2/6723 kg/ud 0,02 0,02 0,02 0,03 0,05 PA6-9011 REF. 2/6724 2/6725 2/6726 2/6727 2/6728 kg/ud 0,02 0,02 0,02 0,03 0,05
144 SBT
SBT
BASORFLEX
Polyamide Accessories
RFLEX PG NUT
DESCRIPTION RFLEX PG07 NUT RFLEX PG09 NUT RFLEX PG11 NUT RFLEX PG13 NUT RFLEX PG16 NUT RFLEX PG21 NUT RFLEX PG29 NUT RFLEX PG36 NUT RFLEX PG48 NUT UVM ud 100 100 100 100 100 100 100 100 100 UVE ud 100 100 100 100 100 100 100 100 100 Dext PG 7 9 11 13 16 21 29 36 48 PA6-7016 REF. 0/0908 0/0909 0/0910 0/0911 0/0912 0/0913 0/0914 0/0915 0/0916 kg/ud 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
SBT 145
3 3
1. ADAPTING HEAD + MCR1250 + R1250 + BUSBAR-TRUNKING 2. BUSBAR-TRUNKING + BUSBAR-TRUNKING SUPPORT + VR8 3. END COVER + MCR1250 + R1250 4. 3FN SOCKET 5. BUSBAR-TRUNKING + END COVER + RFLEX + FLEXL 6. BUSBAR-TRUNKING + METALLIC STRAP
BASOR ELECTRICs busbar trunking system has been designed for the correct distribution of electrical energy in lighting systems for industries, premises, warehouses and shopping centres. Its manufactured in lengths of 3 m and 5 m in pregalvanised steel with drilled flanges at sides which allow them a quickly and comfortably installation suspended from ceiling and also lighting device can be suspended from this trunking. These busbar trunkings is used with 13 A sealed plugs.
GS
CEP
BASORTRUNKING
Busbar Trunking System
DESCRIPTION
Busbar trunking systems have been designed for the correct distribution of electrical energy in lighting systems for industries, premises, warehouses and shopping centres. They are manufactured in lengths of 3 m and 5 m in pregalvanised steel with drilled flanges at the sides which allow them a quickly and comfortably suspended from ceiling and also lighting device can be suspended from this trunking. These trunkings is used with 13 A sealed plugs.
3
1 2 3
3FN Plug with fuse Electrical connection Two mounted pieces
ADVANTAGES
Busbar trunking systems have a great advantage, which is that they are supplied completely assembled. Just plug in and theyre READY!. BASORTRUNKING allows a lighting device to be suspended directly from trunking systems, cutting assembly time (see save suspended loads table). Other advantages include: The plug has a fuse which acts as a protector against short circuits to allow for a quick detection of breakdowns, which reduces considerably the time needed for repair. The busbar trunking systems housing confers it a great resistance to flexion, and the stapling between the two housings grants a sealing degree of IP5X.
REGULATIONS
The busbar trunking systems manufacturing is subject to a series of comprehensive quality controls, all of which are described in the companys quality management system, in accordance with Standard UNEEN ISO 9001. Electrified busbars have been designed and tested in accordance with Standard UNE-EN-60439 Parts 1 and 2.
148 CEP
CEP
BASORTRUNKING
Busbar Trunking System
A20 A202
Series B
Series C
C20
Series E
FN socket
3FN socket
E202 E25
CEP 149
CEP
MODELS MODELS
Model B20 B202 E202 C20 A20 A202 B25 E25 B40
BASORTRUNKING
Busbar Trunking System
Description MTS.BASORTRUNKING 3FN25 5PGS L3 MTS.BASORTRUNKING 3FN25 2T 5PGS L3 MTS.BASORTRUNKING 3FN25 3PGS L5 MTS.BASORTRUNKING FN25 3PGS L3 MTS.BASORTRUNKING FN25 2T 3PGS L3 MTS.BASORTRUNKING 3FN40 5PGS L3 MTS.BASORTRUNKING 3FN40+E 5PGS L3 MTS.BASORTRUNKING 3FN60 5PGS L3
In (A) 20 20 20 20 20 20 25 25 40
Frequency (Hz) 50 50 50 50 50 50 50 50 50
Emergency No No Si No No No No Si No
Length (m) 3 3 3 5 3 3 3 3 3
Weight per stretch (Kg) 3,97 4,05 4,35 6,78 3,74 3,81 4,14 4,51 5,47
TECHNICAL CHARACTERISTICS
Sealing degree: In accordance with Standard UNE 20324 for the degrees of protection provided by enclosures, our busbar trunking system is classified as IP 5X, where the first digit indicates the units protection against the intrusion of solid objects. Maximum save suspended loads: The save suspended working load depends on the distance between supports, as illustrated in the table.
2 30
2,25 27
2,5 24
2,75 21
3 17
Voltage drop: The values included in the table correspond to a unitary voltage drop, should the power supply only enter the system from one side of the busbar trunking system and if the load is distributed along the whole of the line.
Model MTS.BASORTRUNKING 3FN25 5PGS L3 MTS.BASORTRUNKING 3FN25 2T 5PGS L3 MTS.BASORTRUNKING 3FN25+E 2T 5PGS L3 MTS.BASORTRUNKING 3FN25 3PGS L5 MTS.BASORTRUNKING FN25 3PGS L3 MTS.BASORTRUNKING FN25 2T 3PGS L3 MTS.BASORTRUNKING 3FN40 5PGS L3 MTS.BASORTRUNKING 3FN40+E 5PGS L3 MTS.BASORTRUNKING 3FN60 5PGS L3
Ref. 2/6775 2/6777 2/6788 2/0385 2/6478 2/6778 2/6789 2/6790 2/6791
The Unitary Voltage Drop being: e u=k.(e/L.I) eu, e, L, I, k, unitary voltage drop in volts voltage drop in volts length of the cable tray in km service intensity in amps current distribution factor
150 CEP
CEP
BASORTRUNKING
Busbar Trunking System
Depending on the circuits type of power supply and on the distribution of the electric loads, a current distribution factor (k) is applied.
I L
K=0.5 Power supplied from one side and load distributed along the busbar
k=1 Power supplied from one side and load at the end of the busbar
I L
I I L
K=0.25 Power supplied from both sides and loads distributed along the busbar
K=0.25 Power supplied from the center and loads until the end of both sides
I 2
I L I
I 2
K=0.125 Power supplied from the center and loads distributed along the busbar.
ACCESSORIES ACCESSORIES
Accessory Trunking support Adapting head End cover FN Plug with fuse 3FN Plug with fuse FN Socket 3FN Socket Fuse
Und./pack 1 1 1 1 1 1 1 1
N
NEW
FN Scoket - 1/0436
Fuse - 2/0404
CEP 151
ACC
ASSEMBLY SYSTEMS
FASTENERS TO BEAM ................................ Page 165 THREADED ELEMENTS ............................. Page 166 ANCHORS FOR CONCRETE .................. Page 168 FASTENERS TO CONDUIT .................... Page 169
ACC assembly systems are a family of different solutions of profiles, threaded rods accessories and beam accessories.
ACC
41X21 PROFILE
DESCRIPTION 41X21X1,5 41X21X2,5 UVM m 3 3 UVE m 3 3 e mm 1,5 2,5 A cm2 1,4 2,1 Wx cm3 0,8 1,1 Wy cm3 1,9 2,7 GS REF. 2/6366 2/0235 kg/m 1,26 1,71 REF. 2/0236 GC kg/m 1,35 1,8
Eje x Eje y 21 e Eje x 41 41 Eje y
A
25x11
41
41X21 PROFILE
DESCRIPTION 41X41X1,5 41X41X2,5 UVM m 3 3 UVE m 3 3 e mm 1,5 2,5 A cm2 2,0 3,1 Wx cm3 2,1 3,2 Wy cm3 2,9 4,5 GS REF. 2/6365 2/0233 kg/m 1,67 2,53 REF. 2/0234 GC kg/m 1,79 2,66
Eje y
25x11
25
50
61X41 PROFILE
DESCRIPTION 62X41X2,5 UVM m 3 UVE m 3 e mm 2,5 A cm2 4,2 Wx cm3 6,1 Wy cm3 6,4 GS REF. kg/m 4,42 REF. GC kg/m 4,54
e Eje x
41
81X41 PROFILE
DESCRIPTION 82X41X2,5 UVM m 3 UVE m 3 e mm 2,5 A cm2 6,9 Wx cm3 9,5 Wy cm3 9,1 CINCADO REF. kg/m 5,05 GC REF. 2/5573 kg/m 5,31
e eje x eje y 41 25x11
B B
41
154 ACC
25
50
82
25
50
62
A
25
50
ACC
41x41 HEAD
82x41 HEAD
H 41x82
VR ADJUSTABLE SET
A 41x82
B 41x82
C 41x82
D 41x82
E 41x82
F 41x82
G 41x82
ACCESSORIES
PVC CAP
SPRING NUT
NON-SLIPPERY NUT
BOLTS
ACC 155
ACC
41X41 HEAD
DESCRIPTION 41X41 HEAD UVM ud 1 UVE ud 1 Qreac kg 700 Pap Nm 40 GC REF. 2/5622 kg/ud 0,83
108 Qreac
4 51
14
80
46
16 120
81X41 HEAD
DESCRIPTION 82X41 HEAD UVM ud 1 UVE ud 1 Qreac kg 1100 Pap Nm 40 GC REF. 2/5574 kg/ud 1,44
108 Qreac
40
4 8
93
14
80 46 40
180
21
25X11
Qreac 40
25X11 25X11
25X11
46
44 132
156 ACC
21
20
50
25
12
50
25
12
ACC
47
11
45 15
180 25X11
57
25X11
M10X20
SP UNION SUPPORT
28,5
UVM ud 1
UVE ud 1
Pap Nm 20
25
25X11
17,5
19
35
17,5
20 105
13
19,5
Eje Z 141
50
25X11 43 51 Eje Z
22
25X11
13
127
VR ADJUSTABLE SET
DESCRIPTION VR ADJUSTABLE SET UVM ud 1 UVE ud 1 Qreac kg 500 Pap Nm 20 GC REF. 2/6477 kg/ud 0,51
42 Qreac
11
19,5
18,5
ACC 157
48
141
42
ACC
A 41X82
167
20
Eje z
B 41X82
DESCRIPTION B 41/82 UVM ud 1 UVE ud 60 Qreacc kg 350 Pap Nm 40 GC REF. 2/6312 kg/ud 0,23
42 134 46 21 4
13
42 Qreac
C 41X82
DESCRIPTION C 41/82 UVM ud 1 UVE ud 1 Qreacc kg 350 Pap Nm 40 GC REF. 2/6313 kg/ud 0,11
50 Qreac
13
20 21 40
13
21 50
D 41X82
DESCRIPTION D 41/82 UVM ud 1 UVE ud 40 Qreacc kg 1.050 Pap Nm 40 GC REF. 2/6314 kg/ud 0,36
120 Qreac 120 3
20
13
40
40
40
42
13
158 ACC
40
88
40
DESCRIPTION A 41/82
UVM ud 1
UVE ud 110
Reducc z 20%
Pap Nm 40
13
22
41
ACC
E 41X82
ASSEMBLY SYSTEMS
41/82
46
DESCRIPTION E 41/82
UVM ud 1
UVE ud 40
Qreacc kg 700
Pap Nm 40
48,5 137
20
Qreac
A
F 41X82
DESCRIPTION F 41/82 UVM ud 1 UVE ud 25 Qreacc kg 700 Pap Nm 40 GC REF. 2/6316 kg/ud 0,35
87 4
21 41
20 48,5 20
40
137
20
Qreac
G 41X82
DESCRIPTION G 41/82 UVM ud 1 UVE ud 1 Qreacc kg 250 Pap Nm 40 GC REF. 2/6317 kg/ud 0,11
4
46,7
21 40 20
13
74
120
20
13
,7
Qreac
43
51
40
21
20
13
20
ACC 159
69
13
ACC
H 41X82
ASSEMBLY SYSTEMS
41/82
DESCRIPTION H 41/82
UVM ud 1
UVE ud 1
Qreacc kg 800
Pap Nm 40
12
20X11 46
38
48
48
Qreac
PVC CAP
DESCRIPTION 41X41 PVC CAP UVM ud 100 UVE ud 100 PVC REF. kg/ud 2/5627 0,01
41 41 13
10
SPRING NUT
DESCRIPTION SPRING NUT M6 SPRING NUT M8 SPRING NUT M10 UVM ud 100 100 100 UVE ud 100 100 100 Qtrac kg 300 500 500 Qcort kg 150 350 500 CINCADO REF. kg/ud 0/0427 0,03 0/0455 0,03 0/0336 0,04
25
34,5
NON-SLIPPERY NUT
DESCRIPTION NON-SLIPPERY NUT M8 NON-SLIPPERY NUT M10 UVM ud 100 100 UVE ud 100 100 Qtrac kg 500 500 Qcort kg 350 500 CINCADO REF. kg/ud 0/0494 0,03 2/5543 0,03
25
19
34,5
160 ACC
19
ACC
ASSEMBLY SYSTEMS
41/82
BOLTS
DESCRIPTION BOLT DIN 933 M10X30 D8.8 BOLT DIN 933 M8X20 D8.8 BOLT DIN 912 M8X70 D8.8 BOLT DIN 912 M8X55 D8.8 BOLT DIN 933 M6X20 D8.8 UVM ud 100 100 100 100 100 UVE ud 100 100 100 100 100 Pap Nm 40 25 25 25 10 CINCADO REF. kg/ud 0/0512 0,03 0/0310 0,03 0/0930 0,05 0/0940 0,04 0/0727 0,02 I304 REF. 0/0320 0/0318 0/0939 0/0941 0/0330 kg/ud 0,03 0,03 0,05 0,04 0,02
ACC 161
ACC
ASSEMBLY SYSTEMS
Assembly profiles
RA PROFILE
DESCRIPTION RA 35 RA 50 UVM m 3 3 UVE m 30 30 B mm 35 50 e mm 1,5 1,5 A cm2 0,9 1,1 Wx cm3 0,28 0,30 Wy cm3 1,00 1,68 GS REF. 2/0237 2/0239 kg/m 0,79 0,99 REF. 2/0238 2/0240 GC kg/m 0,869 1,089
14 Eje y Eje x 25x8.5
RA JOINT PLATE
DESCRIPTION UNION RA 35 UNION RA 50 UVM ud 1 1 UVE ud 200 150 GS REF. 2/1122 2/1124 kg/ud 0,07 0,11 REF. 2/1123 2/3473 GC kg/ud 0,08 0,12
2 28x7.5 192 B
CT PROFILE
UVM DESCRIPTION m CT 40x20 L3 3 CT 40x20 L2 2 CT 30x30 L3 3 CT 20x10 L2 2 UVE m 24 24 24 40 B mm 40 40 30 20 H mm 20 20 30 10 e mm 1,5 1,5 1,5 1,5 A cm2 12,5 12,5 14,0 3,6 Wx cm3 0,65 0,65 1,11 0,09 Wy GS REF. cm3 1,63 2/4471 1,63 1,49 2/6784 0,25 2/0242 GC kg/m 0,99 1,08 0,34 REF. 2/0246 2/6785 BICRO kg/m REF. kg/m 1,09 2/2067 1,09 1,19 2/0241 0,38
Eje y H Eje x B
23
50
25 25x8.5
SVO PROFILE
DESCRIPTION SVO PROFILE UVM m 3 UVE m 24 e mm 1,5 A cm2 1,5 Wx cm3 0,6 Wy cm3 1,4 GS REF. 2/5313 kg/m 1,20 REF. 2/5443 GC kg/m 1,32
20 Eje y Eje x 20x9
162 ACC
25
50
25
50
50
ACC
ASSEMBLY SYSTEMS
Assembly profiles
Z PROFILE
DESCRIPTION Z PROFILE UVM m 3 UVE m 3 e mm 3 A cm2 2,5 Wx cm3 1,7 Wy cm3 4,0 GS REF. kg/m 2,21 REF. 2/6406 GC kg/m 2,30
47 eje x eje y 67 50 25x9 25
OMEGA DIN-RAIL
DESCRIPTION HIGH OMEGA LOW OMEGA UVM m 2 2 UVE m 40 40 e mm 2 2 GS REF. 2/0248 2/0250 kg/m 0,36 0,69 BICRO REF. kg/m 2/0247 0,36 2/0249 0,70
H e B 5 25
25 16
50
ACC 163
ACC
ASSEMBLY SYSTEMS
Wall fixation profiles
SVP AB SUPPORT
DESCRIPTION SVP AB L500 SVP AB L700 SVP AB L800 SVP AB L1000 UVM ud 1 1 1 1 UVE ud 1 1 1 1 e mm 2 2 2 2 L mm 500 700 800 1000 GC REF. 2/3633 2/5953 2/4958 2/6340 kg/ud 1,26 1,76 1,98 2,50
L e 53 33
R14 13
This support is designed for mounting directly to wall easy. The openings on the open side of the profile facilitates the use of tools. The model 500 dose not have the central drill.
PB PROFILE
DESCRIPTION PB 800 PROFILE PB 1000 PROFILE UVM ud 1 1 UVE ud 1 1 e mm 1,5 1,5 L mm 800 1000 GS REF. 2/3648 2/6370 kg/ud 0,73 0,92 REF. 2/3649 2/5959 GC kg/ud 0,80 1,01
25X 11
35 18 =
min
50
PB CLAMP
DESCRIPTION CLAMP 14-48 NYLON CLAMP 24-72 NYLON UVM ud 1 1 UVE ud 1 1 min mm 14 24 mx mm 48 72 NYLON REF. kg/ud 2/6993 0,05 2/6994 0,07
20
max
SVP 500
SVP 800
164 ACC
ACC
ASSEMBLY SYSTEMS
Fasteners to beam
BEAM-PROFILE CLAMP
DESCRIPTION BEAM-PROFILE CLAMP UVM ud 1 UVE ud 1 Qreac kg 1000 GC REF. 2/5624 kg/ud 0,17
35 3 75 8 110 50x12 40 20 Qreac
ACC 165
ACC
ASSEMBLY SYSTEMS
Threaded elements
THREADED ROD
DESCRIPTION THREADED ROD M6 L1 THREADED ROD M8 L1 THREADED ROD M10 L1 THREADED ROD M12 L2 CONNECTOR M6 CONNECTOR M8 UVM ud 10 10 10 10 1 1 UVE ud 100 50 10 10 1 1 Qtrac kg 400 800 1400 2500 CINCADO REF. kg/ud 0/0678 0,32 2/3397 0,35 2/5535 0,59 2/6502 1,64 2/6323 0,03 2/4462 0,04
D
BOLTS
DESCRIPTION BOLT DIN 933 M10X30 D8.8 BOLT DIN 933 M8X20 D8.8 BOLT DIN 912 M8X70 D8.8 BOLT DIN 912 M8X55 D8.8 BOLT DIN 933 M6X20 D8.8 UVM ud 100 100 100 100 100 UVE ud 100 100 100 100 100 Pap Nm 40 25 25 25 10 CINCADO REF. kg/ud 0/0512 0,03 0/0310 0,03 0/0930 0,05 0/0940 0,04 0/0727 0,02 I304 REF. 0/0320 0/0318 0/0939 0/0941 0/0330 kg/ud 0,03 0,03 0,05 0,04 0,02
NUT DIN934
DESCRIPTION NUT M6 DIN934 NUT M8 DIN934 NUT M10 DIN934 UVM ud 100 100 100 UVE ud 100 100 100 CINCADO REF. kg/ud 0/0710 0,01 0/0339 0,01 0/0340 0,01 I304 REF. 0/0344 0/0343 kg/ud 0,01 0,01 0,01
WASHER DIN125
DESCRIPTION WASHER M6 DIN125 WASHER M8 DIN125 WASHER M10 DIN125 UVM ud 100 100 100 UVE ud 100 100 100 CINCADO REF. kg/ud 0/0711 0,01 0/0292 0,01 0/0649 0,01 I304 REF. 0/0299 0/0294 kg/ud 0,01 0,01 0,01
166 ACC
ACC
SBL
ASSEMBLY SYSTEMS
Threaded elements
103
51,5
DESCRIPTION SBL
UVM ud 1
UVE ud 1
REF. 2/0351
kg/ud 0,11
REF. 2/0361
kg/ud 0,12
17
11
GS
GC
25x9
11
17
18 36
SBC
DESCRIPTION SBC UVM ud 1 UVE Qreac 1 Qreac 2 ud kg kg 1 40 40 REF. 2/0352 kg/ud 0,11 REF. 2/0362 kg/ud 0,12
11
18 18 25X9 Qreac1 Qreac
GS
GC
Qreac2
35 36
70
SBZ
DESCRIPTION SBZ UVM ud 1 UVE ud 1 Qreac kg 35 GS REF. 2/0354 kg/ud 0,11 REF. 2/0364 GC kg/ud 0,12
35 25x9 70 18 17
11
36
73
ACC 167
21
ACC
ASSEMBLY SYSTEMS
Anchors for concrete
D mm 10 12
L mm 70 75
CM BASORFIX ANCHOR
DESCRIPTION CM BASORFIX ANCHOR 6x30 CM BASORFIX ANCHOR 8x30 Concrete load values. UVM ud 100 100 UVE ud 100 100 D mm 6 8 Qtrac kg 280 370 CINCADO REF. kg/ud 2/6468 0,01 2/6469 0,01
30
168 ACC
60
ACC
ASSEMBLY SYSTEMS
Fasteners to conduit
ACC 169
170 SOLAR
...............................................................
ASSEMBLY ACCESSORIES
...............................
.............
BASOR is a company which specialises in the manufacturing, designing and supplying of structures for electrical cable tray systems, water and air systems and photovoltaic panel systems, and which has more than 30 years of experience in the electrical sector. We have a projects department which is always ready to help you carry out your project for setting up a photovoltaic energy system. We offer you advice for the construction and assembly of photovoltaic panel structures, calculating the necessary profiles, the distance between supports and the necessary elements for the correct set-up of the system. We render you the services which you might need: Any calculations relating to the structures, in accordance with the standard on Basic Analysis on Structural Safety or Eurocode. Plans. Necessary materials. Cutting of profiles to minimise costs.
Moreover, for structures of more than 500 KWp, by way of our technical department, we design custom made structures, minimising the set-up costs. BASOR recommends hot dip galvanised steel solutions1, as its the solution which offers the best relationship between the resistance and cost of the material.
All of the materials of the structure have been designed to guarantee the functioning of the system throughout the whole of its useful life. The materials used in the structure of photovoltaic panels are manufactured in hot dip galvanized steel, all bolts are made of A2 stainless steel and fixation elements are made of aluminium.
1
For more information regarding the treatment of surfaces, please consult the Technical Appendix.
172 SOLAR
CLASSIFICATION
BASOR has developed different systems which cover all the needs of photovoltaic parks. Systems are divided into: - Floor systems - Roof systems
FLOOR SYSTEMS
All photovoltaic assemblies depend on their surroundings, as they are capable or reducing the production capabilities of the system. Therefore, depending on the possibility of the existence of plants and herbs, we shall classify the solutions depending on the kind of floor in which the system is going to be set up. - Systems placed on land without organic matter: Its not necessary to elevate the structure, as there is no chance of plants/herbs growing and reducing the systems output. - Systems placed on land with organic matter: The solar structure has to be elevated by placing micropiles, longitudinal or transverse bases or, simply, with the aid of the own structure. The recommended height depends on the percentage of matter contained in the ground, but the minimum recommended height is of 300 mm.
2 2 3
3
Example of a structure on land without organic matter
SOLAR 173
2 3 3
Example of a structure on land which has been elevated with the aid of micropiles
1 2 3
3
Example of a structure on land with organic matter which has been elevated by way of the main structure
174 SOLAR
1 2
2
Example of a parallel planes structure fixed on a sandwich roof
Assemblies on flat roofs The structure is very similar to the one used for floor assemblies without organic matter, but its main feature is the profile which joins both legs and which allows fixing the structure to the roof.
1 2
2
Example of a structure with only one plate assembled on a flat surface
SOLAR 175
SECCIN A-A
Qualities are of A2 electrogalvanised steel or stainless steel, depending on the location and on the investments life expectancy.
B max
B min
176 SOLAR
FIXATION SYSTEM BETWEEN THE LONGITUDINAL PROFILES AND THE PORTICO 5.2. SISTAMA DE FIJACION ENTRE PERFILES LONGITUDINALES Y PORTICO
Profiles are fixed to one another by way of M8x20 or M8x25 bolts and spring nuts, as illustrated below.
SOLAR 177
LONGITUDINAL PROFILES FIXATION SYSTEM 5.3. SISTEMA DE FIJACION ENTRE PERFILES LONGITUDINALES
There are two ways of fixing longitudinal profiles to one another. One of the solutions is by using the corresponding union joint, and the other is the crossing profiles system.
Joining profiles
Crossing profiles
Twirl stud nut Quick fixation system which combines nut and bolt in the same piece. In perforated profiles, it works better than the spring nut, as it avoids the spring from escaping through the perforation.
1 2 3
178 SOLAR
9
80
40
35
8,5
50
SOLAR 179
180 FIRE
FIRE RESISTANCE
Wall Systems
BASOR ELECTRIC certifies that the BASORFIL cable tray installed with the below mentioned characteristics complies with Class E90 of function maintenances, in accordance with Standard DIN 4102, Section 12. This system incorporates BASORFIL BFR with a height of 65, SHO supports are fixed to the wall and reinforced on the ceiling with threaded rods on one side. The distance between supports is of 1.2 m and the maximum load is of 10 kg/m. The system may have one or two levels.
182 FIRE
FIRE RESISTANCE
Wall Systems
REF. 2/0291 2/0970 2/3397 2/6477 0/0338 2/4363 2/4360 Description BASORFIL BFR 100x65 GC SHO 100 GC Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut ULA 65 GC Set BF GC Bolt-staple set RF M8 CINCADO Anchor 2/6318 RF M10 CINCADO Anchor SHO GC Supporting piece 1 level Quantity 1.2 m 1 unit 0.25 m 1 unit 4 units 0.8/100 units 2.4/100 units 2 units 1 unit 1 unit 2 levels Quantity 2.4 m 2 units 0.5 m 1 unit 6 units 1.6/100 units 4.8/100 units 4 units 1 unit 2 units 2/6318 REF. 2/0292 2/0971 2/3397 2/6477 0/0338 2/4363 2/4360 Description BASORFIL BFR 150x65 GC SHO 150 GC Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut ULA 65 GC Set BF GC Bolt-staple set RF M8 CINCADO Anchor RF M10 CINCADO Anchor SHO GC Supporting piece 1 level Quantity 1.2 m 1 unit 0.25 m 1 unit 4 units 0.8/100 units 2.4/100 units 2 units 1 unit 1 unit 2 levels Quantity 2.4 m 2 units 0.5 m 1 unit 6 units 1.6/100 units 4.8/100 units 4 units 1 unit 2 units
Description BASORFIL BFR 200x65 GC SHO 200 GC Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut ULA 65 GC Set BF GC Bolt-staple set RF M8 CINCADO Anchor RF M10 CINCADO Anchor SHO GC Supporting piece
1 level Quantity 1.2 m 1 unit 0.25 m 1 unit 4 units 0.8/100 units 2.4/100 units 2 units 1 unit 1 unit
2 levels Quantity 2.4 m 2 units 0.5 m 1 unit 6 units 1.6/100 units 4.8/100 units 4 units 1 unit 2 units
Description BASORFIL BFR 300x65 GC SHO 300 GC Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut ULA 65 GC Set BF GC Bolt-staple set RF M8 CINCADO Anchor RF M10 CINCADO Anchor SHO GC Supporting piece
1 level Quantity 1.2 m 1 unit 0.25 m 1 unit 4 units 0.8/100 units 2.4/100 units 2 units 1 unit 1 unit
2 levels Quantity 2.4 m 2 units 0.5 m 1 unit 6 units 1.6/100 units 4.8/100 units 4 units 1 unit 2 units
2/6318
2/6318
Description BASORFIL BFR 100x65 I304 SHO 100 GC Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut ULA 65 I304 Set BF I304 Bolt-staple set RF M8 CINCADO Anchor RF M10 CINCADO Anchor SHO GC Supporting piece
1 level Quantity 1.2 m 1 unit 0.25 m 1 unit 4 units 0.8/100 units 2.4/100 units 2 units 1 unit 1 unit
2 levels Quantity 2.4 m 2 units 0.5 m 1 unit 6 units 1.6/100 units 4.8/100 units 4 units 1 unit 2 units
Description BASORFIL BFR 150x65 I304 SHO 150 GC Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut ULA 65 I304 Set BF I304 Bolt-staple set RF M8 CINCADO Anchor RF M10 CINCADO Anchor SHO GC Supporting piece
1 level Quantity 1.2 m 1 unit 0.25 m 1 unit 4 units 0.8/100 units 2.4/100 units 2 units 1 unit 1 unit
2 levels Quantity 2.4 m 2 units 0.5 m 1 unit 6 units 1.6/100 units 4.8/100 units 4 units 1 unit 2 units
2/6318
2/6318
Description BASORFIL BFR 200x65 I304 SHO 200 GC Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut ULA 65 I304 Set BF I304 Bolt-staple set RF M8 CINCADO Anchor RF M10 CINCADO Anchor SHO GC Supporting piece
1 level Quantity 1.2 m 1 unit 0.25 m 1 unit 4 units 0.8/100 units 2.4/100 units 2 units 1 unit 1 unit
2 levels Quantity 2.4 m 2 units 0.5 m 1 unit 6 units 1.6/100 units 4.8/100 units 4 units 1 unit 2 units
Description BASORFIL BFR 300x65 I304 SHO 300 GC Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut ULA 65 I304 Set BF I304 Bolt-staple set RF M8 CINCADO Anchor RF M10 CINCADO Anchor SHO GC Supporting piece
1 level Quantity 1.2 m 1 unit 0.25 m 1 unit 4 units 0.8/100 units 2.4/100 units 2 units 1 unit 1 unit
2 levels Quantity 2.4 m 2 units 0.5 m 1 unit 6 units 1.6/100 units 4.8/100 units 4 units 1 unit 2 units
2/6318
2/6318
FIRE 183
FIRE RESISTANCE
Ceiling Systems
BASOR ELECTRIC certifies that the BASORTRAY ERE installed with the below mentioned characteristics complies with Class E90 of function maintenances, in accordance with Standard DIN 4102, Section 12. This system incorporates BASORTRAY ERE H60, SHOT supports are fixed to the ceiling and reinforced on the ceiling with threaded rods on one side. The distance between supports is of 1.2 m and the maximum load is of 10 kg/m.
Description B/P ERE 200X60 GS SHOT 200 GS Support SHO GS Supporting piece M8 CINCADO Threaded rod VR GC Variable set B1 CINCADO Bolt set M8 DIN6923 CINCADO nut RF M10 CINCADO Anchor RF M8 CINCADO Anchor
Quantity 1.2 m 1 unit 1 unit 0.25 m 1 unit 3.6/100 units 4 units 1 unit 2 units
Description B/P ERE 300X60 GS SHOT 300 GS Support SHO GS Supporting piece M8 CINCADO Threaded rod VR GC Variable set B1 CINCADO Bolt set M8 DIN6923 CINCADO nut RF M10 CINCADO Anchor RF M8 CINCADO Anchor
Quantity 1.2 m 1 unit 1 unit 0.25 m 1 unit 3.6/100 units 4 units 1 unit 2 units
184 FIRE
FIRE RESISTANCE
Ceiling Systems
REF. 2/1227 2/1095 2/6318 2/3397 2/6477 2/6826 0/0338 Description B/P ERE 100X60 GC SHOT 100 GC Support SHO GC Supporting piece M8 CINCADO Threaded rod VR GC Variable set B1 GC Bolt set M8 DIN6923 CINCADO nut RF M10 CINCADO Anchor RF M8 CINCADO Anchor Quantity 1.2 m 1 unit 1 unit 0.25 m 1 unit 3.6/100 units 4 units 1 unit 2 units REF. 2/1228 2/1096 2/6318 2/3397 2/6477 2/6826 0/0338 Description B/P ERE 150X60 GC SHOT 150 GC Support SHO GC Supporting piece M8 CINCADO Threaded rod VR GC Variable set B1 GC Bolt set M8 DIN6923 CINCADO nut RF M10 CINCADO Anchor RF M8 CINCADO Anchor Quantity 1.2 m 1 unit 1 unit 0.25 m 1 unit 3.6/100 units 4 units 1 unit 2 units
Description B/P ERE 200X60 GC SHOT 200 GC Support SHO GC Supporting piece M8 CINCADO Threaded rod VR GC Variable set B1 GC Bolt set M8 DIN6923 CINCADO nut RF M10 CINCADO Anchor RF M8 CINCADO Anchor
Quantity 1.2 m 1 unit 1 unit 0.25 m 1 unit 3.6/100 units 4 units 1 unit 2 units
Description B/P ERE 300X60 GC SHOT 300 GC Support SHO GC Supporting piece M8 CINCADO Threaded rod VR GC Variable set B1 GC Bolt set M8 DIN6923 CINCADO nut RF M10 CINCADO Anchor RF M8 CINCADO Anchor
Quantity 1.2 m 1 unit 1 unit 0.25 m 1 unit 3.6/100 units 4 units 1 unit 2 units
Description B/P ERE 100X60 I304 SHOT 100 GC Support SHO GC Supporting piece M8 CINCADO Threaded rod VR GC Variable set B1 I304 Bolt set M8 DIN6923 CINCADO nut RF M10 CINCADO Anchor RF M8 CINCADO Anchor
Quantity 1.2 m 1 unit 1 unit 0.25 m 1 unit 3.6/100 units 4 units 1 unit 2 units
Description B/P ERE 150X60 I304 SHOT 150 GC Support SHO GC Supporting piece M8 CINCADO Threaded rod VR GC Variable set B1 I304 Bolt set M8 DIN6923 CINCADO nut RF M10 CINCADO Anchor RF M8 CINCADO Anchor
Quantity 1.2 m 1 unit 1 unit 0.25 m 1 unit 3.6/100 units 4 units 1 unit 2 units
Description B/P ERE 200X60 I304 SHOT 200 GC Support SHO GC Supporting piece M8 CINCADO Threaded rod VR GC Variable set B1 I304 Bolt set M8 DIN6923 CINCADO nut RF M10 CINCADO Anchor RF M8 CINCADO Anchor
Quantity 1.2 m 1 unit 1 unit 0.25 m 1 unit 3.6/100 units 4 units 1 unit 2 units
Description B/P ERE 300X60 I304 SHOT 300 GC Support SHO GC Supporting piece M8 CINCADO Threaded rod VR GC Variable set B1 I304 Bolt set M8 DIN6923 CINCADO nut RF M10 CINCADO Anchor RF M8 CINCADO Anchor
Quantity 1.2 m 1 unit 1 unit 0.25 m 1 unit 3.6/100 units 4 units 1 unit 2 units
FIRE 185
FIRE RESISTANCE
Ceiling Systems
BASOR ELECTRIC certifies that the BASORTRAY FRE installed with the below mentioned characteristics complies with Class E90 of function maintenances, in accordance with Standard DIN 4102, Section 12. This system incorporates BASORTRAY FRE H60, SPL supports are fixed to the ceiling with SHL horizontal support with reinforced on the ceiling with threaded rods on one side. The distance between supports is of 1.2 m and the maximum load is of 10 kg/m. The system may have one or two levels.
Description B/P FRE 200x65 GS SPL 600 CINCADO Support SHL 200 CINCADO Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut B1 CINCADO Bolt set M10X30 CINCADO Bolt set RF M10 CINCADO Anchor
1 level Quantity 1.2 m 1 unit 1 unit 0.3 m 1 unit 4/100 units 3.6/100 units 2/100 units 3 units
2 levels Quantity 2.4 m 1 unit 2 units 0.6 m 1 unit 6/100 units 7.2/100 units 4/100 units 3 units
Description B/P FRE 300x65 GS SPL 600 CINCADO Support SHL 300 CINCADO Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut B1 CINCADO Bolt set M10X30 CINCADO Bolt set RF M10 CINCADO Anchor
1 level Quantity 1.2 m 1 unit 1 unit 0.3 m 1 unit 4/100 units 3.6/100 units 2/100 units 3 units
2 levels Quantity 2.4 m 1 unit 2 units 0.6 m 1 unit 6/100 units 7.2/100 units 4/100 units 3 units
186 FIRE
FIRE RESISTANCE
Ceiling Systems
REF. 2/0056 2/6841 2/6866 2/3397 2/6477 0/0338 2/6826 2/6321 Description B/P FRE 100x65 GC SPL 600 GC Support SHL 100 GC Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut B1 GC Bolt set M10X30 CINCADO Bolt set RF M10 CINCADO Anchor 1 level Quantity 1.2 m 1 unit 1 unit 0.3 m 1 unit 4/100 units 3.6/100 units 2/100 units 3 units 2 levels Quantity 2.4 m 1 unit 2 units 0.6 m 1 unit 6/100 units 7.2/100 units 4/100 units 3 units REF. 2/0057 2/6841 2/6867 2/3397 2/6477 0/0338 2/6826 2/6321 Description B/P FRE 150x65 GC SPL 600 GC Support SHL 150 GC Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut B1 GC Bolt set M10X30 CINCADO Bolt set RF M10 CINCADO Anchor 1 level Quantity 1.2 m 1 unit 1 unit 0.3 m 1 unit 4/100 units 3.6/100 units 2/100 units 3 units 2 levels Quantity 2.4 m 1 unit 2 units 0.6 m 1 unit 6/100 units 7.2/100 units 4/100 units 3 units
Description B/P FRE 200x65 GC SPL 600 GC Support SHL 200 GC Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut B1 GC Bolt set M10X30 CINCADO Bolt set RF M10 CINCADO Anchor
1 level Quantity 1.2 m 1 unit 1 unit 0.3 m 1 unit 4/100 units 3.6/100 units 2/100 units 3 units
2 levels Quantity 2.4 m 1 unit 2 units 0.6 m 1 unit 6/100 units 7.2/100 units 4/100 units 3 units
Description B/P FRE 300x65 GC SPL 600 GC Support SHL 300 GC Support M8 CINCADO Threaded rod VR GC Variable set M8 DIN6923 CINCADO nut B1 GC Bolt set M10X30 CINCADO Bolt set RF M10 CINCADO Anchor
1 level Quantity 1.2 m 1 unit 1 unit 0.3 m 1 unit 4/100 units 3.6/100 units 2/100 units 3 units
2 levels Quantity 2.4 m 1 unit 2 units 0.6 m 1 unit 6/100 units 7.2/100 units 4/100 units 3 units
FIRE 187
When designing an electrical inatallation, with all its electrical connections and cable conduction system, different aspects such as corrosion, the mechanical resistance of the set or its price must be considered. In some cases, the lack of information, the number of alternatives or the ignorance on the subject make the engineering task more difficult and slow down the design process. BASOR ELECTRIC has created this technical appendix with the aim of making the process of selection and design easier and of being able to offer its clients the maximum information regarding all of these aspects whilst maintaining the work line which has turned BASOR into a leading company within its sector. The Technical Department.
CORROSION. DEFINITIONS DEGREES OF PROTECTION AGAINST CORROSION STANDARD MATERIALS AND FINISHES SPECIAL MATERIALS AND FINISHES
CABLE TRAY DIMENSIONS VENTILATION AND SEALING DEGREE DETERMINING THE WORKLOAD (SWL) SAVE WORKING LOAD (SWL) SPAN LENGTH DEFLECTION MININUM AREA OF THE CABLE TRAY SPACE LIMITATIONS SERVICE TEMPERATURE. THERMAL CONTRACTIONS AND EXPANSIONS ELECTRICAL CONTINUITY ELECTROMAGNETIC COMPATIBILITY COST OF MATERIALS vs. FINAL COST OF THE SYSTEM USE OF THE SAVE WORKING LOAD (SWL) GRAPHS CABLE TRAYS HORIZONTAL SUPPORTS PENDANTS Load on one side Load on both sides UNIT CONVERSION TABLE TECHNICAL INDEX CARDS
22 23
DESIGN PROCESS
When carrying out a study of any electrical system, one must bare in mind a series of determining factors which shall help chose and condition the system, all of which shall be further explained. In the first place, its necessary to select the conduction system. One of the following existing solutions such as cable trays, trunkings or conduits shall be chosen. CABLE TRAYS TRUNKINGS CONDUITS
Cable conduction with mechanical protection (IK rating) and protection against external agents (IP rating)
Cable conduction with mechanical protection (IK rating) and protection against external agents (IP rating)
These three devices may all be present in the same system, depending on the area which the line has to cross. In the second place, the material and the finish shall be chosen depending on the environmental conditions, which may be:
Dry interior
Humid interior
Rural exterior
Marine exterior
Urban exterior
Once both these aspects have been defined, it is necessary to measure the different conduction systems. In order to do so, the following aspects must be taken into consideration: Weight and dimensions of the cables which shall run through the cable tray Geometrical restrictions of the system Nature of the currents which shall run through the cables (power, signal or data). One same canalisation may contain cables of these 3 types but, in such case, their electromagnetic compatibility shall have to be ensured by way of using separating longitudinal sections. Space reserved for future enlargements
Data
Pow er
Sign al
CORROSION. DEFINITIONS.
Corrosion is defined as the deterioration of any material due to an electrochemical attack caused by its environment. The speed at which it happens shall depend on the temperature, the salinity of the fluid which is in contact with the metal and the properties of the metals present. Other non-metallic elements also suffer corrosion caused by other mechanisms. Atmospheric corrosion: Atmospheric corrosion happens when metal is exposed to liquids, solids or gases transported in the atmosphere. Humidity, salt, corrosive gases and dirt are its main factors. This type of corrosion takes place in open air conditions, places with poor ventilation and marine environments. Some classifications study saline corrosion independently, because saline corrosion happens when a metallic surface is exposed to different saline concentrations forming a galvanic pile at times where the surface exposed to the lowest degree of saline concentration behaves like an anode. Chemical corrosion: Chemical corrosion happens when a metal is directly exposed to chemical solutions. Depending on the solutions level of concentration, contact time, cleaning frequency and service temperature, the level of corrosion will be higher or lower.
Galvanic corrosion:
Anode Zinc Aluminium Steel I316 I304 Copper Nickel Cathode Passivate I316 Passivate I304
COPPER PIPE DIELECTRIC UNIT PLASTIC PROTECTION GALVANISED PIPE CORROSION
Its the most common type, and happens when two different metals are in contact with one another. When two different metals come into contact one with the other, a small galvanic par is created, as one metal acts as an anode and the other as a cathode. The one with the most negative reduction potential shall oxidise whilst the one with the most positive reduction potential shall be reduced.
Storage corrosion: In some cases (steel with a zinc covering), when materials are stored in poor ventilated or humid places, white stains may appear on the surface. Generally speaking, these white stains are superficial and dont affect the coverings properties, even though wiping them off is strongly advised in order to allow the protective layer to form itself correctly. The material has to be stored in a dry and ventilated place, avoiding storing it outside, even in conditions of low humidity.
Reference-Material and Finish None Electroplated to a minimum thickness of 5 m Electroplated to a minimum thickness of 12 m Pre-galvanised to grade 275 to EN 10327 and EN 10326 Pre-galvanised to grade 350 to EN 10327 and EN 10326 Post galvanised to a zinc mean coating thickness (minimum) of 45 m according to ISO 1461 only for zinc thickness Post galvanised to a zinc mean coating thickness (minimum) of 55 m according to ISO 1461 only for zinc thickness Post galvanised to a zinc mean coating thickness (minimum) of 70 m according to ISO 1461 only for zinc thickness Post galvanised to a zinc mean coating thickness (minimum) of 85 m according to ISO 1461 only for zinc thickness (Usually high silicon steel) Stainless steel manufactured to ASTM: A 240/A 240M 95a designation S30403 or EN 10088 grade 1-4301 without a post treatment Stainless steel manufactured to ASTM: A 240/A 240M 95a designation S31603 or EN 10088 grade 1-4404 without a post treatment Stainless steel manufactured to ASTM: A 240/A 240M 95a designation S30403 or EN 10088 grade 1-4301 with a post treatment Stainless steel manufactured to ASTM: A 240/A 240M 95a designation S31603 or EN 10088 grade 1-4404 with a post treatment
6 7 8 9A 9B 9C 9D
Moreover, the UNE-EN IEC 61537 Standard allows us to draw up a conversion table which compares the resistance to corrosion with the duration of the Neutral Salt Spray (NSS) test according to Standard ISO 9227, allowing manufacturers and engineers to create new finishes and materials.
Corrosion Speed Environment Interior: dry Interior: occasional condensation Exterior: rural Interior: high level of humidity, slightly polluted air Exterior: urban inland or mild coastal Interior: swimming pools, chemical plants Exterior: industrial inland or mild urban Exterior: very humid industrial or high salinity coastal (mean loss of zinc thickness)a m per year < 0.1 0.1 - 0.7 0.7 - 2 2-4 4-8
In the case of zinc coverings, the UNE-EN IEC 61537 Standard defines the speed of corrosion depending on the mean loss of the covering with regards to the location of the installation with respects to the sea (inland or coastal area) and also depending on whether such installation is being subject to the weathers inclemencies (inside/covered or outside/exposed to elements). This table can be applied to other types of products made of steel with a zinc covering, such as system profiles and accessories. All data has been extracted from the UNE-EN ISO 14713:2000 Standard, entitled Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings.
In order to estimate the life of any steel with a zinc coating, it is necessary to be aware of the coatings mean thickness and of the systems location. Its life is equivalent to the quotient between such thickness and the locations speed of corrosion and, therefore, is not an absolute value, because it depends on the environmental fluctuations of the surroundings, as shown in the table above.
Different materials together with a finish which is adequate for the environmental conditions in which the electrical system is placed have to be used depending on the mechanical, electrical or resistance against corrosion properties. Materials Steel Properties - Electrical continuity - Ideal for areas with strong temperature changes, operating both at high and low temperatures. - Resistance to corrosion varies depending on the selected finish. - Good response to flexure. - Good response to fire (M0). Non-flammable material. No gas emissions. - 100 % recyclable material - Electrical continuity - High resistance to corrosion - Ideal for areas with strong temperature changes, operating both at high and low temperatures. - Good response to flexure. - Good response to fire (M0). Non-flammable material. No gas emissions. - 100% recyclable material - Insulating and light material - Easy handling and installation - Good resistance to corrosion - Flame retardant material - Low fire resistance. Depends on the raw material. - Limited service temperature range - Gas emission depending on the raw material. - 100% recyclable material
Thermoplastic
The available standard finishes are: Pre-galvanised (GS) Laminated continuously galvanised through immersion in molten zinc steel, manufactured according to the UNE-EN 10327 Standard. The steels protection shall depend on the coverings mass. Galvanised sendzimir steel is used for cold-forming, and the protection against corrosion of the mechanised areas (perforations, edges, etc.) is due to the galvanic protection, a kind of protection conferred to steel by way of being in contact with a zinc anode. The zinc anode chemically reacts with the environment, creating a protective film and preventing the reaction between the environment and the piece from happening. The galvanised sendzimir steel used by BASOR ELECTRIC as standard is of type Z275 (19 microns of mean thickness) and is classified by UNE-EN IEC 61537 Standard as Class 3. Galvanised sendzimir steel is used in dry environments free of pollutants. Hot Dip Galvanised Steel (HDG) Laminated or rust removed galvanised after forming steel according to UNE-EN ISO 1461 Standard. The steels protection is conferred by a zinc coating which varies depending on the steels thickness, offering a uniform covering. The zinc coatings thickness depends on the thickness of the base material and ranges between the values shown in the table. The UNE-EN IEC 61537 Standard classifies the resistance against corrosion of these galvanised steels as Class 5 for the covering of 45m, Class 6 for 55m, Class 7 for 70m and Class 8 for 85m. Hot dip galvanised steel is used in humid environments, granting a high protection during adverse atmospheric situations, light chemical situations, light marine situations and urban situations.
Electrogalvanised (CINCADO) A steel base coated with a zinc layer by electrolysis, by means of submerging the pieces in a bath composed by zinc solutions, in accordance with UNE-EN 12329 Standard (ISO 2081). Depending on the type of zinc layer, it shall have a different degree of protection on the steel, avoiding corrosion and enhancing the visual appearance of the piece. This treatment is carried out once the piece has been formed. The UNE-EN IEC 61537 Standard classifies the degree of resistance to corrosion of the systems components depending on the steels electrolytic covering, belonging to Class 1 those with a minimum thickness of 5m and to Class 2 those of 12m. BASOR ELECTRIC uses Class 2 as its standard material in order to guarantee the quality of its products against corrosion. This treatment is used in dry environments free of pollutants. Bicromatised Steel (BICRO) A base of steel coated with a zinc layer by electrolysis, by means of submerging the pieces in a solution composed by zinc solutions, in accordance with UNE-EN 12329 Standard (ISO 2081), followed by a treatment with chromium salts, in accordance with UNE-EN 112050 Standard (ISO 4520). The electrolytic coverings are chromicised with the aim of retarding the formation of corrosion. Depending on the type of zinc layer and on the kind of final passivation, it shall have a different degree of protection on the steel, avoiding corrosion. This treatment is carried out once the piece has been formed. The UNE-EN IEC 61537 Standard classifies the degree of resistance to corrosion of the systems components depending on the steels electrolytic covering, belonging to Class 1 those with a minimum thickness of 5m and to Class 2 those of 12m. BASOR ELECTRIC uses Class 2 as its standard material. This treatment is used in dry environments free of pollutants. The bicromatisation process conducted by BASOR ELECTRIC complies with Directive 2002/95/EC RoHS, and does not use hexavalent chromium. Painted Steel (GSE) Steel covered with an epoxy-polyester hybrid resin. The steel is covered by a powder resin and, subsequently, a polymerisation is carried out at a temperature of between 185-190C during a period of 15 minutes. The micronage obtained is between 60 and 80 microns and is characterised by an excellent adherence. This covering is applied on galvanised sendzimir steel or on a base of steel. In this second case, before the electrostatic application of the resin, the pieces have the grease removed from them and also an amorphous phosphatation by spray in the treatment tunnel is conducted, as this improves the protection of the base material against corrosion. Painted steel is used in humid, light chemical and urban environments, whenever the decorative appearance is important. Stainless Steel AISI 304 (I304) Denominated 1.4301 according to the numerical classification established by the UNE-EN 10088 Standard. Steels protection happens due to the great affinity which metals such as chromium have with oxygen, which gives place to the creation of a protective chromium oxide layer which avoids the corrosion of iron. Type I304 stainless steels are carbon steels alloyed with chromium, nickel and manganese. They are ideal to be used in chemical and food industries, laboratories and wineries and in the naval industry. Under special conditions, and always under order, there is the possibility of conducting a passivation process. Passivation is a treatment which enhances stainless steels protection against corrosion by means of forming a relatively inert film on the surface of a material which protects it against the action of external agents. The passivation film or layer does not allow these agents to interact, reducing or stopping the chemical reaction from happening. UNE-EN IEC 61537 Standard classifies this steels resistance to corrosion as Class 9A without the passivation treatment and as Class 9C with the passivation treatment. Stainless steel AISI 304L has the same characteristics regarding corrosion as steel AISI 304, but offers a higher degree of welding and easier forming of the pieces with a thickness of more than 6mm. PVC Thermoplastic Polymer (PVCM1) Thermoplastic polymer developed by BASOR which offers a good resistance to fire. The PVCM1 is a non-flammable and self-extinguishing material classified as M1 by UNE 23727 Standard and as VO by UL-94 Standard. PVCM1 products are light, perfect electric insulators, chemically inert and totally innocuous. PVCM1 is used in interior and exterior industrial facilities, but for external installations the use is limited to a good ambiance ventilation and one meter distance between supports. This material providing a high degree of protection in adverse, chemical, marine or urban atmospheric situations. PVCM1s mechanical characteristics vary depending on the temperature, reason why its use is restricted to service temperatures between -20C and 60C. BASORs PVCM1 is 100% recyclable and complies with Directive 2002/95/EC RoHS, in force since the 1st of July 2006.
Dry GS CINCADO BICRO GC GSE I304 PVCM1 PP7035 PA6 PA6-V0 PA12 R R R E R E R R R R R
Food Industry NR NR NR NR R R R R R R R
Urban L L L R L E L R R R R
Food Industry NR NR NR L NR L L R R R R
Aluminium
Depending on the property which one wishes to enhance, these are different finishes available: Steel Painted with Polyester (GSP) Steel covered with a polyester resin. The steel is covered by a powder polyester resin and, subsequently, a polymerisation is carried out at a temperature of between 190-195C during a period of 15 minutes. The micronage obtained is between 60 and 80 microns and is characterised by an excellent adherence. This covering is applied on galvanised sendzimir steel or on a base of steel. In this second case, before the electrostatic application of the resin, the pieces have the grease removed from them and also an amorphous phosphatation by spray in the treatment tunnel is conducted, as this improves the protection of the base material against corrosion. Steel Painted with Polyester Resin is resistant to ultraviolet rays, and is used in both interior and exterior humid environments, aggressive chemical environments and saline environments. BASORs GSP system, with its covering, exceeds Class 8 of UNE-EN IEC 61537 Standard by far. Duplex Steel (GCE) Hot dip galvanised steel, as stated in UNE-EN ISO 1461 Standard, with a subsequent epoxy-polyester covering. This layer, with its mechanical resistance and good chemical resistance, improves the hot dip galvanised initial layers resistance to corrosion. The total thickness of the two layers of this protection system has an approximate value of 160m. An 85 m GC covering is considered Class 8 by the UNE-EN IEC 61537 Standard and exceeds from 850 hours in the Neutral Salt Spray Test (ISO 9227). BASORs GCE system, with its double covering, improves Class 8 considerably. Moreover, this finish is suitable for aggressive environments classed as C4, C5-I and C5-M (UNE-EN ISO 12944-5). Stainless Steel AISI 316 (I316) Denominated 14401 according to the numerical classification established by the UNE-EN 10088 Standard. Steels protection happens due to the great affinity which metals such as chromium have with oxygen, which gives place to the creation of a protective chromium oxide layer which avoids the corrosion of iron. Type I316 stainless steels are similar to type 1304, but they contain a 2.5% of molybdenum which confers it a greater resistance to localised corrosion. It is ideal for use in very corrosive environments, even at high temperatures. Under special conditions, and always under order, there is the possibility of conducting a passivation process. Passivation is a treatment which enhances stainless steels protection against corrosion by means of forming a relatively inert film on the surface of a material which protects it against the action of external agents. The passivation film or layer does not allow these agents to interact, reducing or stopping the chemical reaction from happening. UNE-EN IEC 61537 Standard classifies this steels resistance to corrosion as Class 9B without the passivation treatment and as Class 9D with the passivation treatment.
Food Industry R R E R R
Urban R E E R R
Food Industry R R R R R
Depending on the type of system, the aim shall be to obtain lower working temperatures in the conductors in order to improve the systems output, or simply to try to achieve a higher level of protection against the penetration of any kind of external agent inside the tray.
In a system, there are different types of loads which can be taken into consideration. The designer shall be in charge of determining which loads are applicable in each case, depending on the conditions (location, environment, etc). Weight of the cables: The cables weight is modelled as a linear distributed load and its value shall be determined by the number of cables and their individual weight. If a Security Coefficient (SC) is determined for future enlargements, this factor shall have to be necessarily taken into account in the calculation dealing with the cables weight and not only when determining the Minimum area. Therefore, the cables final weight shall be calculated as the summation of the number of cables of each type multiplied by their increased weight, multiplied by the security coefficient, and shown as follows: Weight of the cables = 1 + SC 100
n Weight
TECHNICAL APPENDIX 199
Qdis(kg/m) =
Should the momentary load be exceptional in the system (and only if the system allows it), we recommend momentarily reducing the support span until the maximum deflection requirements are fulfilled. The momentary load shall be distributed between the supporting elements which are nearer to the momentary load, reason why they shall be dimensioned according to the new requirements. IMPORTANT! Cable trays should NEVER be used as walkways. Wind loads: Wind is an atmospheric condition which always has to be considered in the case of outdoor installations. Wind exerts a dynamic pressure on the trays surfaces, both on vertical and horizontal surfaces. Under normal conditions (1 atm and 15C), the pressure exerted by the effect of wind shall depend on the winds speed.
w(km/h) 54 108 144 180 w(m/s) 15 30 40 50 P(Kg/m^2) 14.06 56.25 100.00 156.25
One important aspect when designing a tray system is the wind pressures impact angle, reason why BASOR recommends considering that, for outdoor installations, the impact pressures design angle ranges between (-60/60) for systems which run parallel to the floor. The least favourable impact pressure shall be the pressure which is perpendicular to the surface. Example: A 600x100 cable tray placed in a horizontal position, with a wind of 30 m/s and a wind attack angle of -60 to 60 with respect to the axis parallel to the floor: Wing effect: 0.1 x 56.25 = 5.62 kg/m Base effect: 0.6 x 56.25 x sin 60 = 29.23 kg/m When perforated tray systems (or ladder type cable trays) with cover are installed, it is also necessary to take the aerodynamic effects into consideration, as they produce a difference in pressures between both sides of the cover which can cause such cover to raise itself with a gust of wind. In order to avoid this from happening, it is essential to fix the cover with the systems recommended for each family of products. Recommendation: Whenever wind may possibly affect the system, BASOR recommends fixing the cable tray to everry support with a minimum of two fixation elements and two cover fixations placed every 1.5 metres. For complex systems or systems with high wind loads, please contact our technical department.
As it shall be explained further on, in order to determine the most adequate cable conduction system, the total LINEAR cost of the installation (trays, supports, fixation elements, etc.) has to be taken into consideration, as the LINEAR cost of both the supports and the fixation elements mainly depends on the support span. There is no international classification of the canalisation systems depending on its save working load (SWL). However, countries like the USA, Canada or Mexico have their own classifications which divide the canalisation systems into categories depending on their SWL.
DEFLECTION
The deflection is the deformation generated in the canalisation due to the workload which it has to support. According to Standard UNE-EN IEC 61535 with regards to the SWL, the longitudinal deflection located halfway through the span length must not be greater than d/100 of the span length and the transverse deflection must not be grater than B/20 of the canalisations width.
Cable-filling area: In order to determine the total cable-filling area, simply take a look at the useful section of each of the cables which shall run through the tray and add them up. To calculate the empty spaces which shall inevitably be left between the cables, a cables useful section shall be considered as the square of its diameter. Suseful = 2
n S
useful
BASOR recommends leaving around 40% for future enlargements. Additional ventilation area: Depending on the system, the designer may decide to add another safety coefficient to the calculated area in order to ensure a good ventilation of the cables.
SPACE LIMITATIONS
One of the factors which may limit the choice is space limitations, regarding both the width and height available for the systems installation.
BASOR recommends leaving a free space of between 150 and 300 mm between cable trays to facilitate access to the canalisation system. The distance shall depend on how easy it is to access the canalisation and the need to handle it. Under no circumstance should the electrical system be placed under a system dealing with liquids.
150~300
150~300
This effect expands or contacts the material depending on its expansion coefficient. In order to be able to measure the effects of expansion and compression, the material has to be compared at two different temperatures, reason why it is important that the cable canalisation systems design takes into account the range of service temperatures in which its going to be used. At a glance, the effects of contraction/expansion cant be perceived, but in the case of bigger cable trays this effect becomes more obvious. Our union systems use longitudinal holes to absorb the movements caused by thermal expansion. BASOR ELECTRIC recommends separating the straight stretches, leaving space for the unions to act as expansion joints which will allow these movements. The length of the stretch of trays, the difference in service temperature and the material used shall determine the maximum straight stretch necessary to install a union which will behave as an expansion joint.
DISTANCE BETWEEN EXPANSION JOINTS FOR A MOVEMENT OF 20 mm
In systems which include PVC cable trays and which have to put up with strong temperature changes, BASOR recommends separating the stretches in the trays 10 mm one from the other, due to the high linear expansion coefficient of the material.
Difference in temperature C 30 50 70
Steel m 99 51 36
Stainless Steel m 60 36 24
Aluminium m 45 27 21
ELECTRICAL CONTINUITY
As stated in Standard UNE-EN IEC 61537, cable conduction systems are classified into two groups, depending on their capacity to conduct an electric current, entitled Systems with electrical continuity and Systems without electrical continuity. In cable trays systems with electrical continuity, we shall have to ensure that the same level of power runs throughout the whole system. In tray systems or tray systems without electrical continuity, we shall have to ensure that the resistance of the materials surface is high enough so as to avoid danger in case of a leak.
ELECTROMAGNETIC COMPATIBILITY
Cable conduction systems are passive elements, in their normal use, with respects to electromagnetic influences, to emissions and to immunity. If a metallic cable conduction system displays good electrical continuity and is connected to an equipotential bonding ground, the cables disruption connection decreases, improving the Electromagnetic Compatibility (EMC). Moreover, if the cable conduction system with electrical continuity is composed by the tray and its cover, its degree of protection against disruptions improves considerably. Cable conduction systems without electrical continuity do not protect against electromagnetic fields. In this case, the only solution to improve the electromagnetic compatibility is to increase the distance between the cable management systems.
BASOR recommends: Separating power and data circuits more than 20 cm Circuits must cross one another at an angle of 90 Connect the cable management systems to the equipotential ground network every 30 m.
20 cm
In places where space is limited, different circuits can be installed in one sole cable management system, separated by a metallic divider.
Data
Pow er
Inst rum ent s
of thecanalisation =
of the system m
To sum it up, we can conclude that using reinforced products (due to the fact that they are able to support greater loads and depending on each case) may save installation costs, both regarding the number of supports needed (greater distance between them) and in the labour needed to set them up and join them to the cable tray, up to the point where the global installation cost is lower than when using cheaper products.
CABLE TRAYS
The graph represents the distance between supports d(m) on the horizontal axis, the SWL (kg/m) on the left vertical axis and deflection (mm) in the centre of the support span on the right vertical axis. BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL ERE H=60 mm 160 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY 30 BASORFIL BASORTRAV SWL 100-300 140 BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY SWL 400-600 25 BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING Def 120 BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL 100 20 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 80 Def=14 mm d=2m BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY 15 BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY CTA=55 kg/m d=2m 60 BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING 10 BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX 40 BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL 5 20 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY d (m) BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL In order to find out the SWL corresponding to the tray ERE 200x60 placed at 2 m, one must search for the value 2 on the horizontal axis, go up to meet the corresponding SWL curve and obtain (on the left vertical axis) the value of its SWL which, for this piece of equipment, is equal to 55 kg/m. If one goes up to meet the deflection curve (right vertical axis), the obtained deflection value at the centre of the support span is of 14 mm. In the case of ladder type cable trays, there are SWL values which are limited by the load which the rung is capable of supporting and not by the total value. For example, for the FE 600x100 cable ladder, the SWL has an approximated limited maximum value of 335 kg/m. The following graph highlights the curve for B=600. BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 FE BASORPLAST BASORCANAL BASORTUB BASORFLEXH=100mm, rung spacing=333mm BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV 800 80 BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY SWL LIM CTA B=300 700 70 BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB Def BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL600 BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX 60 BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL LIM CTA B=400 500 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV50 BASORSUPPORT I304 LIM CTA B=500 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV 400 40 LIM CTA B=600 BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING 300 30 BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX 200 20 BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV10 BASORSUPPORT I304 100 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV 0 0 BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING d (m) BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL Therefore, for a span length of 2 m, the SWL would be 335 kg/m whilst for a span length of 3.6 m, the SWL would be 120 kg/m.
SWL (kg/m)
SWL (kg/m) Def (mm)
Def (mm)
207
HORIZONTAL SUPPORTS 2. SOPORTES HORIZONTALES R BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX This graph represents the SWL (kg) on the horizontal axis and the deflection on the edge of the horizontal support on the vertical axis. BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL SHO BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 SORPLAST BASORCANAL22 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV SHO 400 20 ASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY ORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING 18 R BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX 16 SHO 300 BASORTRUNKING BASOR14 BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 12 SHO 150 SORPLAST BASORCANAL10 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV SHO 200 ASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY 8 ORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING 6 SHO 100 R BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX 4 BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL 2 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 0 0 10 20 30 40 50 60 70 80 90 100 110 SORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV SWL (kg) ASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY ORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING For the SHO 300 support, if we draw a straight line which goes down to meet the horizontal axis, we observe that the SWL correspondent R BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX to the SHO 300 support is 70 kg. BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL In order to find out the SHO 300 supports deflexion with a load of 45 kg, we search for the value 45 on the horizontal axis and draw a line upwards to meet the corresponding curve to obtain (on the left vertical axis) the value of its deflexion, equivalent to 9 mm in this example. PENDANTS
3.1 Load on one side: Should the horizontal supports which are united to the pendant be on one side, the simplified graph which shows the 3 predetermined horizontal support widths on the horizontal axis and the deformation on the left vertical axis can be used.
Def (mm)
In order to find out if you can use an SP800 as a pendant with three supports, two with a width of B=400 equivalent to 30 kg each and one with a width of B=500 equivalent to 15 kg, all located on the same side of the pendant, the following steps must be followed: a) The total load is Q = 2x30 + 15 = 75 kg b) The width B=500 is selected, being the greatest of among the horizontal supports. As width B=500 is not shown on the horizontal axes, select the next in size which, in this case, is B=600. c) Look for the intersection with the straight line corresponding to SP800. d) Check that you are within the SWL values (that is to say, that it does effectively intersect with the straight line corresponding to R BASORTRAY SP800). On the vertical axis, one may observe the pendants deflection which, in this example,BASORTUBto 13 mm. BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL is equivalent BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL SP BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 SORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY 800 25 SP BASORFIL BASORTRAV ASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY ORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING 20 R BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX SP 600 15 BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL SP 500 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 SP BASORFIL BASORTRAV 10 SORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY 400 ASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY SP 300 5 ORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING R BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX 0 BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV (kg) Q BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY180 200 220 BASORTRAV300 BASORFIL 240 260 280 BASORSUPPORT I304 B=200mm 0 20 40 60 80 100 120 140 160 SORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR160 BASORTRAY BASORFIL BASORTRAV B=400mm 0 20 40 60 80 100 120 140 180 200 ASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB 80 90 100 110 BASORTRUNKING BASOR BASORTRAY BASORFLEX 120 130 140 150 160 B=600mm 0 10 20 30 40 50 60 70 ORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING R BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL 208
Def (mm)
Fi
i
Ftot= 40+55+50 = 145 kg We add up the momentums of the loads on each side, Mright =
i i
Firight x
Bileft + 50 2000
Fi
left
Bileft + 50 2000
Mleft = 50 x 0.225 = 11.25 kgm We calculate the equivalent momentum as the difference between the momentums of both sides Meq = Mright Mleft = 24.875-11.25 = 13.625 kgm
Once we have calculated this data (Ftot, M ) we may consult the graph and check that we are within the safety working area. BASOR BASORTRAY BASORFIL BASORTRAV eq BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL SP BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 55 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV 50 SP 300: Cd=0,142 BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY SP 400: Cd=0,203 45 BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING SP 500: Cd=0,265 SP 600: Cd=0,326 BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX 40 SP 800: Cd=0,509 BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL 35 BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 30 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY 25 BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING ZS 20 BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX 15 BASORTRUNKING BASOR BASORTRAY BASORFILFtot=145 Kg, Meq=13.6 Kg*m BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 10 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV 5 BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX BASORTRUNKING BASOR BASORTRAY 0 BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX 600 BASORTRUNKING 0 50 100 150 200 250 300 350 400 450 500 550 BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL BASORTUB BASORFLEX Q (kg) BASORTRUNKING BASOR BASORTRAY BASORFIL BASORTRAV BASORSUPPORT I304 BASORPLAST BASORCANAL To calculate the pendants maximum deflection, we must multiply the SP600s deformation coefficient by the equivalent momentum. Deformation = Meq x Cd = 13.625 x 0.326 = 4.44 mm
M (kgxm)
209
210
SCM
ERE
DECLARATION OF CONFORMITY FOR ER TECHNICAL INDEX CARD FOR CABLE TRAY (ER) DECLARATION OF CONFORMITY FOR ER+COVER TECHNICAL INDEX CARD FOR TRUNKING (ER+COVER) DECLARATION OF CONFORMITY FOR ERE TECHNICAL INDEX CARD FOR CABLE TRAY (ERE) DECLARATION OF CONFORMITY FOR ERE+COVER TECHNICAL INDEX CARD FOR TRUNKING (ERE+COVER) DECLARATION OF CONFORMITY FOR FRE TECHNICAL INDEX CARD FOR CABLE TRAY (FRE) DECLARATION OF CONFORMITY FOR FRE+COVER TECHNICAL INDEX CARD FOR TRUNKING (FRE+COVER) DECLARATION OF CONFORMITY FOR BS TECHNICAL INDEX CARD FOR CABLE TRAY (BS) DECLARATION OF CONFORMITY FOR U TECHNICAL INDEX CARD FOR CABLE TRAY (U) DECLARATION OF CONFORMITY FOR OMEGA TECHNICAL INDEX CARD FOR CABLE TRAY (OMEGA) DECLARATION OF CONFORMITY FOR BFR DECLARATION OF CONFORMITY FOR BF TECHNICAL INDEX CARD FOR CABLE TRAY (BF/BFR) DECLARATION OF CONFORMITY FOR FE TECHNICAL INDEX CARD FOR CABLE TRAY (FE H60) TECHNICAL INDEX CARD FOR CABLE TRAY (FE H75/100/120/150)
26 27 28 29 30 31 34 35 36 37 40 41 42 43 46 47 50 51 54 55 56 58 59 60 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81
FRE
BASORTRAV FE
DECLARATION OF CONFORMITY FOR BSL TECHNICAL INDEX CARD FOR CABLE TRAY (BSL) BASORSUPPORTS WALL SUPPORTS TECHNICAL INDEX CARD (SHO) TECHNICAL INDEX CARD (SCR) TECHNICAL INDEX CARD (SRB) TECHNICAL INDEX CARD (SR) TECHNICAL INDEX CARD(SPL) TECHNICAL INDEX CARD (SHL) TECHNICAL INDEX CARD (SP) TECHNICAL INDEX CARD (SHR) TECHNICAL INDEX CARD (SPD) TECHNICAL INDEX CARD (SHV) SIMPLE HEAD BRACKET CEILING/FLOOR SUPPORTS TECHNICAL INDEX CARD (SHOT) TECHNICAL INDEX CARD (SVO) TECHNICAL INDEX CARD (SHO 400) TECHNICAL INDEX CARD (PC + HEAD BRACKET) TECHNICAL INDEX CARD (PC + SIMPLE HEAD BRACKET) TECHNICAL INDEX CARD (SPL) TECHNICAL INDEX CARD (SP)
BSL
212
I304
TECHNICAL INDEX CARD (SZ) TECHNICAL INDEX CARD (SPD) TECHNICAL INDEX CARD (HEAD SUPPORT + IPN80) FLOOR SUPPORTS TECHNICAL INDEX CARD (SV) BASORTRAY ERE I304 TECHNICAL INDEX CARD (ERE I304) TECHNICAL INDEX CARD (ERE + COVER I304) BASORFIL BFR I304 TECHNICAL INDEX CARD (BFR) BASORSUPPORT I304 TECHNICAL INDEX CARD (SCR I304) TECHNICAL INDEX CARD (SV I304) TECHNICAL INDEX CARD (SVO I304) TECHNICAL INDEX CARD (PC + HEAD BRACKET I304) BASORPLAST BPB DECLARATION OF CONFORMITY FOR BPB TECHNICAL INDEX CARD FOR TRUNKING (BPB) BASORPLAST BPI DECLARATION OF CONFORMITY FOR BPI TECHNICAL INDEX CARD (BPI) DECLARATION OF CONFORMITY FOR BPI + COVER TECHNICAL INDEX CARD FOR TRUNKING (BPI+COVER) BASORSUPPORT SCP TECHNICAL INDEX CARD FOR SHG BASORCANAL CT DECLARATION OF CONFORMITY FOR CT TECHNICAL INDEX CARD FOR TRUNKING (CT) BASORTUB DECLARATION OF CONFORMITY FOR R1250 PVC TECHNICAL INDEX CARD FOR R1250 PVC DECLARATION OF CONFORMITY FOR R1250 RLH TECHNICAL INDEX CARD FOR R1250 RLH DECLARATION OF CONFORMITY FOR RE1250 RLH TECHNICAL INDEX CARD FOR RE1250 RLH DECLARATION OF CONFORMITY FOR FLEXL PA6
82 83 84 85 86 87 88 90 91 92 93 94 95 96 97 100 101 102 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125
SCP
SCE
SBT
BASORTRUNKING DECLARATION OF CONFORMITY FOR BASORTRUNKING BASORPERFIL 41/82 TECHNICAL INDEX CARD FOR 41X21X1.5 TECHNICAL INDEX CARD FOR 41X21X2.5 TECHNICAL INDEX CARD FOR 41X41X1.5 TECHNICAL INDEX CARD FOR 41X41X2.5 TECHNICAL INDEX CARD FOR 41X82X2.5 ASSEMBLY PROFILES TECHNICAL INDEX CARD FOR CT 20X10X1 TECHNICAL INDEX CARD FOR CT 30X30X1.5 TECHNICAL INDEX CARD FOR CT 40X20X1.5 TECHNICAL INDEX CARD FOR PC PROFILE TECHNICAL INDEX CARD FOR RA 35X14X1.5 TECHNICAL INDEX CARD FOR RA 50X14X1.5 TECHNICAL INDEX CARD FOR Z 35X50X35X3
213
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORTRAY ENERGY ER Declares that the product: BASORTRAY ENERGY ER
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
214
BASORTRAY ER
UNE-EN 61537:2007
REV.5/05/2009
www.basor.com
ER 50x50
Model: 50x50 Finishes: GS; HDG Characteristics of the cable tray: - Metallic - Non-flame propagating component - System with electrical continuity characteristic - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 5 - Classification according to the free base area: Non-perforated tray: Classification A Perforated tray: Classification B - Impact resistance: 5J
Accessories: This family has the following accessories: Cover, horizontal bend, vertical inside, vertical outside, coupler.
215
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORTRAY ENERGY ER CON TAPA ER Declares that the product: BASORTRAY ENERGY ER WITH COVER ER
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
216
BASORTRAY ER+COVER
UNE-EN 50085-2-1:2008
REV.28/05/2009
www.basor.com
ER 50x50+COVER
ER 50x50+COVER
Model: 50x50 Finishes: GS; HDG Characteristics of the trunking: - Metallic system - Impact resistance: 5J - Minimum storage temperature of -45 C - Minimum installation temperature of -25 C - Maximum temperature of 120 C - Non-flame propagating component - System with electrical continuity characteristic - Without electrical insulating characteristic - Level of protection: Non-perforated ER 50x50 + ER 50 cover: IP34 Perforated ER 50x50 + ER 50 cover: IP23 - Interior and exterior medium level protection against corrosive substances - With access cover which can be opened without the need of tools - Possibility of additional partition wall for internal protection.
Accessories: This family has the following accessories: Horizontal bend, vertical inside, vertical outside, coupler.
217
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORTRAY ENERGY ERE Declares that the product: BASORTRAY ENERGY ERE
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
218
BASORTRAY ERE
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
ERE
ER 50x50+COVER
Models (BxH): 100x35; 150x35; 200x35; 300x35; 100x60; 150x60; 200x60; 300x60; 400x60; 500x60; 600x60; 100x80; 150x80; 200x80; 300x80; 400x80; 500x80; 600x80; 100x100; 150x100; 200x100; 300x100; 400x100; 500x100; 600x100. Finishes: GS; HDG Characteristics of the cable tray: - Metallic - Non-flame propagating component - System with electrical continuity - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 5 - Impact resistance: 20J - Classification according to the free base area: Non-perforated tray: A Perforated tray:
Base Models 100 150 200 300 400 500 600 Classification C B C C C C C
Accessories: This family has large array of accessories: Cover, divider, horizontal bend, vertical inside, vertical outside, T intersection, AS intersection, joint plate, ajustable joint and angle joint.
SWL (kg/m)
15
Def (mm)
219
220
221
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORTRAY ENERGY ERE CON TAPA ERE Declares that the product: BASORTRAY ENERGY ERE WITH COVER ERE
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
222
BASORTRAY ERE+COVER
UNE-EN 50085-2-1:2008
REV.28/05/2009
www.basor.com
ERE+COVER
ER 50x50+COVER
Models (BxH): 100x35; 150x35; 200x35; 300x35; 100x60; 150x60; 200x60; 300x60; 400x60; 500x60; 600x60; 100x80; 150x80; 200x80; 300x80; 400x80; 500x80; 600x80; 100x100; 150x100; 200x100; 300x100; 400x100; 500x100; 600x100. Finishes: GS; HDG Characteristics of the trunking: - Metallic system - Impact resistance: 20J - Minimum storage temperature of -45 C - Minimum installation temperature of -25 C - Maximum temperature of 120 C - Non-flame propagating component - System with electrical continuity characteristic - Without electrical insulating characteristic - Level of protection: Non-perforated ER + ER cover: IP44 Perforated ER + ER cover: IP23 - With medium protection outside and inside against corrosive substances - With access cover which can be opened without the need of tools - Possibility of additional internal protective partition.
Accessories: This family has large array of accessories: Cover, divider, horizontal bend, vertical inside, vertical outside, T intersection, AS intersection, reduction, joint plate.
223
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORTRAY ENERGY FRE Declares that the product: BASORTRAY ENERGY FRE
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
224
BASORTRAY FRE
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
FRE
ER 50x50+COVER
Models (BxH): 100x35; 150x35; 200x35; 300x35; 100x60; 150x60; 200x60; 300x60; 400x60; 500x60; 600x60; 100x80; 150x80; 200x80; 300x80; 400x80; 500x80; 600x80; 150x100; 200x100; 300x100; 400x100; 500x100; 600x100. Finishes: GS; HDG Characteristics of the cable tray: - Metallic - Non-flame propagating - System with electrical continuity - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 5 - Impact resistance: 20J - Classification according to the free base area:
Model 100 150 200 300 400 500 600 Classification C B C C C C C
Accessories: This family has large array of accessories: Cover, divider, horizontal bend, vertical inside, vertical outside, T intersection, AS intersection, reduction, joint plate, ajustable joint and angle joint.
150
30
100
20
225
150
15
150
15
100
10
100
10
50 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0
50 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0
d (m)
d (m)
226
227
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORTRAY ENERGY FRE CON TAPA Declares that the product: BASORTRAY ENERGY FRE WITH COVER
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
228
BASORTRAY FRE+COVER
UNE-EN 50085-2-1:2008
REV.28/05/2009
www.basor.com
FRE+COVER
ER 50x50+COVER
Models (BxH): 100x35; 150x35; 200x35; 300x35; 100x60; 150x60; 200x60; 300x60; 400x60; 500x60; 600x60; 100x80; 150x80; 200x80; 300x80; 400x80; 500x80; 600x80; 150x100; 200x100; 300x100; 400x100; 500x100; 600x100. Finishes: GS; HDG Characteristics of the trunking: - Metallic system - Impact resistance: 20J - Minimum storage temperature of -45 C - Minimum installation temperature of -25 C - Maximum temperature of 120 C - Non-flame propagating component - System with electrical continuity characteristic - Without electrical insulating characteristic - Level of protection: Non-perforated FRE + ERE/FRE cover: IP44 Perforated FRE + ERE/FRE cover: IP23 - With medium protection outside and inside for GS; With high protection outside and inside for HDG. - With access cover which can be opened without the need of tools - Possibility of additional internal protective partition.
Accessories: This family has large array of accessories: Cover, divider, horizontal bend, vertical inside, vertical outside, T intersection, AS intersection, reduction, joint plate.
229
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORTRAY BS Declares that the product: BASORTRAY BS
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
230
BASORTRAY BS
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
BS
ER 50x50+COVER
Models (BxH): 75x50; 100x50; 150x50; 225x50; 300x50; 450x50; 600x50. Finishes: GS; HDG Characteristics of the cable tray: - Metallic - Non-flame propagating component - System with electrical continuity - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 5 - Impact resistance: 20J - Classification according to the free base area:
Base Models 75 100 150 225 300 450 600 Classification B C C C C C C
Accessories: This family has large array of accessories: Cover, divider, horizontal bend, vertical inside, vertical outside, T intersection, AS intersection, reduction, inside joint plate, outside joint.
231
d (m)
d (m)
232
233
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORTRAY U Declares that the product: BASORTRAY U
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
234
BASORTRAY U
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
ER 50x50+COVER
Models (BxH): 50x15; 100x15; 150x15; 200x15; 300x15; 50x30; 100x30; 150x30; 200x30; 300x30; 50x50; 100x50; 150x50; 200x50; 300x50; 400x50; 500x50; 600x50. Finishes: HDG Characteristics of the cable tray: - Metallic - Non-flame propagating component - System with electrical continuity - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion HDG coating: Class 6 - Impact resistance: 20J - Classification according to the free base area:
Base Models 50 100 150 200 300 400 600 Classification B C C C C C C
Accessories: This family has large array of accessories: Cover, divider, horizontal bend, vertical inside, vertical outside, T intersection, JUE joint.
235
236
237
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORTRAY OMEGA Declares that the product: BASORTRAY OMEGA
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
238
BASORTRAY OMEGA
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
OMEGA
ER 50x50+COVER
Models (BxH): 50x20; 100x20; 150x20; 200x20; 300x20; 50x30; 100x30; 150x30; 200x30; 300x30; 50x50; 100x50; 150x50; 200x50; 300x50; 400x50; 500x50; 600x50. Finishes: HDG Characteristics of the cable tray: - Metallic - Non-flame propagating component - System with electrical continuity - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion HDG coating: Class 6 - Impact resistance: 20J - Classification according to the free base area:
Model 50 100 150 200 300 400 600 Classification B C C C C C C
Accessories: This family has large array of accessories: Cover, divider, horizontal bend, vertical inside, vertical outside, T intersection, JUE joint.
239
OME H=30 mm & e=2.5 mm 240 220 200 180 SWL (kg/m) 160 140 120 100 80 60 1.5 1.6 1.7 1.8 1.9 2.0 d (m) 2.1 2.2 2.3 2.4 2.5 SWL Def 20 18 Def (mm) 16 14 12 10 8 6 SWL (kg/m) 24 22
OME H=50 mm & e=2.5 mm 350 17 SWL Def 300 16 15 14 13 250 12 11 200 10 9 8 150 7 6 1.5 1.6 1.7 1.8 1.9 2.0 d (m) 2.1 2.2 2.3 2.4 2.5
240
241
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORFIL BFR Declares that the product: BASORFIL BFR
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
242
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORFIL BF Declares that the product: BASORFIL BF
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
243
BASORFIL BF/BFR
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
BF/BFR
ER 50x50+COVER
Models (BxH): 100x35; 150x35; 200x35; 300x35; 60x65; 100x65; 150x65; 200x65; 300x65; 400x65; 500x65; 600x65; 200x105; 300x105; 400x105; 500x105; 600x105. Finishes: Cincado; HDG Characteristics of the cable tray: - Metallic - Non-flame propagating component - System with electrical continuity characteristic - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion Cincado coating: Class 2 HDG coating: Class 6 - Classification according to the free base area:
Base Models 60 100 150 200 300 400 500 600 Classification Z Y Y Y Y Y Y Y
244
245
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORTRAV FE Declares that the product: BASORTRAV FE
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
246
BASORTRAV FE H60
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
FE H60
ER 50x50+COVER
Models (BxH): 100x60; 150x60; 200x60; 300x60; 400x60; 500x60; 600x60. Finishes: HDG Characteristics of the cable tray: - Metallic - Non-flame propagating component - System with electrical continuity - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion HDG coating: Class 6 - Impact resistance: 20J - Classification according to the free base area:
Base Models 100 150 200 300 400 500 600 Classification X X Y Y Y Y Y
Accessories: This family has large array of accessories: Cover, divider, horizontal bend, articulated vertical inside-outside, T intersection, cross intersection, reduction, FE clamp, H60 joint plate, articulated union joint, angle joint. The minimum radius for the accessories is of 100 mm.
247
BASORTRAV FE H75/100/120/150
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
FE H75/100/120/150
ER 50x50+COVER
Models (BxH): 100x75; 150x75; 200x75; 300x75; 400x75; 500x75; 600x75; 100x100; 150x100; 200x100; 300x100; 400x100; 500x100; 600x100; 150x120; 200x120; 300x120; 400x120; 500x120; 600x120; 150x150; 200x150; 300x150; 400x150; 500x150; 600x150. Finishes: HDG Characteristics of the cable tray: - Metallic - Non-flame propagating component
FE H75/100/120
- System with electrical continuity - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finish; resistance to corrosion HDG coating: Class 6 - Impact resistance: 20J
FE H150
Note: Classification X for models 200 and 300 with rung spacing 250mm. No change for the rest of the models.
FE H150
Accessories: This family has large array of accessories: Cover, ERE divider, horizontal bend, vertical inside, vertical outside, T intersection, cross intersection, reduction, FE clamp, joint plate, articulated joint and angle joint. The minimum radius for the accessories is of 330 mm.
248
350 SWL 300 250 SWL (kg/m) 200 30 150 20 100 50 0 1.5 2.0 2.5 3.0 3.5 d (m) 4.0 4.5 5.0 5.5 6.0 10 LIM CTA B=600 Def 50 500 40 SWL (kg/m) 400 Def (mm) LIM CTA B=400 Def (mm) Def (mm) Def (mm) Def (mm) LIM CTA B=500 LIM CTA B=600 40 600 LIM CTA B=300 SWL Def 50 60
300
30
200
20
100
10
0 1.5 2.0 2.5 3.0 3.5 d (m) 4.0 4.5 5.0 5.5 6.0
1200 800 700 600 SWL (kg/m) 500 400 300 200 100 0 1.5 2.0 2.5 3.0 3.5 d (m) 4.0 4.5 5.0 5.5 6.0 LIM CTA B=500 LIM CTA B=600 LIM CTA B=400 SWL Def 80 70 60 SWL (kg/m) Def (mm) 50 40 30 20 10 0 1100 1000 900 800 700 600 500 400 300 200 100 0 1.5 2.0 2.5 3.0 3.5 d (m) 4.0 4.5 5.0 5.5 6.0 LIM CTA B=600 LIM CTA B=400 LIM CTA B=500 LIM CTA B=300 SWL Def
350 300 250 SWL (kg/m) 200 30 150 20 100 50 0 1.5 2.0 2.5 3.0 3.5 d (m) 4.0 4.5 5.0 5.5 6.0 10 SWL Def 600 50 500 40 SWL (kg/m) 400 Def (mm) LIM CTA B=500 LIM CTA B=600 LIM CTA B=400 SWL Def 50 60
40
300
30
200
20
100
10
0 1.5 2.0 2.5 3.0 3.5 d (m) 4.0 4.5 5.0 5.5 6.0
1200 800 700 600 SWL (kg/m) 500 400 300 200 100 0 1.5 2.0 2.5 3.0 3.5 d (m) 4.0 4.5 5.0 5.5 6.0 LIM CTA B=600 SWL Def 80 70 60 SWL (kg/m) Def (mm) 50 40 30 20 10 0 1100 1000 900 800 700 600 500 400 300 200 100 0 1.5 2.0 2.5 3.0 3.5 d (m) 4.0 4.5 5.0 5.5 6.0 LIM CTA B=600 LIM CTA B=400 LIM CTA B=500 SWL Def
249
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORTRAV BSL Declares that the product: BASORTRAV BSL
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CEE (Directiva de Baja Tensin) 2006/95/CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537
Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
250
BASORTRAV BSL
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
BSL
ER 50x50+COVER
Models (BxH): 300x150; 400x150; 600x150; 300x200; 400x200; 600x200. Finishes: HDG Characteristics of the cable tray: - Metallic - Non-flame propagating component - System with electrical continuity - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion HDG coating: Class 6 - Impact resistance: 20J - Classification according to the free base area:
Base Models 300 400 600 Classification Y Y Y
Accessories: This family has large array of accessories: Horizontal bend, vertical inside, vertical outside, T intersection, cross intersection, joint plate, articulated joint, angle joint. The minimum radius for the accessories is of 330 mm.
BSL H=200 mm 40 SWL Def 35 1000 30 900 800 25 SWL (kg/m) 600 500 15 400 300 200 5 10
LIM SWL B=600 LIM SWL B=400
1200 1100
LIM SWL B=300
40 SWL Def 35 30
20
20
Def (mm)
700
700
251
BASORSUPPORT SHO
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
ER 50x50+COVER
Models (B): 100; 150; 200; 300;400. Finishes: GS; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6 - Impact resistance: 20J
SHO 400
SHO 300
60
70
80
90
100
110
252
BASORSUPPORT SCR
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
ER 50x50+COVER
Models (B): 50; 100; 150; 200; 300; 400; 500; 600; 750. Finishes: GS; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6
SCR 400 SCR 300 SCR 200 SCR 150 SCR 100 SCR 50
253
BASORSUPPORT SRB
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
ER 50x50+COVER
Models (B): 100; 150; 200; 300; 400; 500; 600. Finishes: GS; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6
SRB
35
40
45
50
55
60
65
254
BASORSUPPORT SR
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
SR HORIZONTAL SUPPORT
ER 50x50+COVER
Models (B): 300; 400; 500; 600. Finishes: GS; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6
- To guarantee a good ventilation, we recommend installing the trays keeping a minimum distance of 250 mm between each tray. - Trays which are placed on supports shall have to keep a gap of 20 mm from the wall to allow for a correct ventilation of the cables.
SR+PC
PC+SR 22 SR 600 SR 500 SR 400 Def (mm) SR 300 20 18 16 14 12 10 8 6 SR 400 SR 300 SR 500 SR 600
25
20
Def (mm)
15
10
4 2
0 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280
SWL (kg)
255
BASORSUPPORT SPL
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
ER 50x50+COVER
Models (L): 150; 200; 300; 400; 500; 600. Finishes: GS; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6
SPL 600
SPL 500
SPL 400
256
Def (mm)
BASORSUPPORT SHL
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
ER 50x50+COVER
Models (B): 100; 150; 200; 300; 400; 500; 600. Finishes: GS; HDG Characteristics : - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6
257
BASORSUPPORT SP
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
SP HORIZONTAL SUPPORT
ER 50x50+COVER
Models (B): 150; 200; 300; 400; 500; 600. Finishes: GS; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6
SP SP 600
250
300
350
400
258
BASORSUPPORT SHR
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
ER 50x50+COVER
Models (B): 300; 400; 500; 600; 700; 800. Acabado: HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion HDG coating: Class 6
SHR SHR 800 SHR 700 SHR 600 SHR 500 SHR 400 SHR 300
250
300
350
259
BASORSUPPORT SPD
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
ER 50x50+COVER
Models (B): 500; 600; 700; 800; 1000. Acabado: HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion HDG coating: Class 6
350
400
450
500
550
260
BASORSUPPORT SHV
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
ER 50x50+COVER
Models (B): 200; 300; 400; 500; 600; 700; 800. Acabado: HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion HDG coating: Class 6
SHV SHV 800 SHV 700 SHV 600 SHV 500 SHV 400 SHV 300 SHV 200
261
www.basor.com
ER 50x50+COVER
Finishes: GS; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6
262
BASORSUPPORT SHOT
UNE-EN 61537:2007
REV.17/06/2009
www.basor.com
ER 50x50+COVER
Models (B): 100; 150;200;300 Finishes: GS; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive component - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6 - Minimum temperature of -50 C - Maximum temperature of 150 C
SHOT 300
35
40
45
50
55
60
263
BASORSUPPORT SVO
UNE-EN 61537:2007
REV.17/06/2009
www.basor.com
ER 50x50+COVER
Models (B): 150; 200; 250; 300; 350; 400; 500; 600. Finishes: GS; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive component - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6 - Minimum temperature of -50 C - Maximum temperature of 150 C
264
Def (mm)
www.basor.com
ER 50x50+COVER
Models (L): 400. Finishes: GS; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6 Related products: - SHO
SHO 400 7 SHO 400: Cd=1,91 6 5 M (kgxm) 4 3 2 1 0 0 10 20 30 40 50 60 70 80 Q (kg) 90 100 110 120 130 140 150 160
ZS
In order to determine the suitability of the SHO 400 support, observe the relationship between the bending moment and the traction load which has the most unfavourable effect on the support and check whether it is working within the limits of the safety area. To obtain the pendants deflection, multiply the bending moment (M) by the corresponding supports distortion coefficient (Cd). f=M*Cd
265
www.basor.com
ER 50x50+COVER
Models (L): 3000 Finishes: GS ; HDG; I304. Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive component - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6 - Minimum temperature of -50 C - Maximum temperature of 150 C Related products: - On the profiles open area: SR. - On the profiles lateral area: SRB; SCR.
20 30 L=600 mm 18 16 14 Def (mm) 20 L=300 mm 15 M (kgxm) 12 10 8 6 4 Q (kg) 2 10 5 5 10 10 20 15 30 20 15 25 20 40 30 25 50 35 40 30 60 45 35 70 50 40 55 45 80 60 90 65 50 100 70 55 75 60 0 0 B=600mm 0 20 40 60 80 100 Q (kg) 120 140 160 180 200
25
L=500 mm L=400 mm
10
ZS
B=200mm 0 B=400mm 0
In order to determine the suitability of the PC+HEAD BRACKET support, observe the relationship between the bending moment and the traction load which has the most unfavourable effect on the support and check whether it is working within the limits of the safety area. To obtain the pendants deflection, multiply the bending moment (M) by the corresponding supports distortion coefficient (Cd). f=M*Cd
266
www.basor.com
14 13 12 11 10 9 8 7 6 ZS 5 4 3 Q (kg) 10 5 5 10 20 15 10 30 20 15 40 25 20 30 50 35 25 60 40 30 70 45 35 80 50 55 40 90 60 45 2 1 0 0 20 40 60 80 100 120 140 Q (kg) 160 180 200 220 240 260 280
In order to determine the suitability of the PC+SIDE HEAD BRACKET support, observe the relationship between the bending moment and the traction load which has the most unfavourable effect on the support and check whether it is working within the limits of the safety area. To obtain the pendants deflection, multiply the bending moment (M) by the corresponding supports distortion coefficient (Cd). f=M*Cd
267
BASORSUPPORT SPL
UNE-EN 61537:2007
REV.17/06/2009
www.basor.com
ER 50x50+COVER
Models (L): 300; 400; 500; 600; 700; 800 Finishes: Cincado; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity - Electrically conductive component - With a metallic finishes; resistance to corrosion Galvanised coating: Class 2 HDG coating: Class 6 - Minimum temperature of -50 C - Maximum temperature of 150 C Related products: - On the profiles open area: SRB; SCR; SPL; SHL; SP. - On the perforated area: SRB; SCR; SHL.
SPL 300: Cd=0,255 SPL 400: Cd=0,287 SPL 500: Cd=0,351 SPL 600: Cd=0,415 SPL 800: Cd=0,639
15 ZS
In order to determine the suitability of the SPL support, observe the relationship between the bending moment and the traction load which has the most unfavourable effect on the support and check whether it is working within the limits of the safety area. To obtain the pendants deflection, multiply the bending moment (M) by the corresponding supports distortion coefficient (Cd). f=M*Cd
268
BASORSUPPORT SP
UNE-EN 61537:2007
REV.17/06/2009
www.basor.com
ER 50x50+COVER
Models (L): 300; 400; 500; 600; 800 Finishes: Cincado; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity - Electrically conductive component - With a metallic finishes; resistance to corrosion Galvanised coating: Class 2 HDG coating: Class 6 - Minimum temperature of -50 C - Maximum temperature of 150 C Related products: - On the profiles open area: SRB; SCR; SPL; SHL; SP. - On the perforated area: SRB; SCR; SHL.
SP CEILING
SP FLOOR
SP CEILING
SP FLOOR
SP 300: Cd=0,142 SP 400: Cd=0,203 SP 500: Cd=0,265 SP 600: Cd=0,326 SP 800: Cd=0,509
Q (kg) 20 20 40 60 40 80 60 100 120 80 140 100 160 120 180 200 140 220 160 240 260 180 280 200 300
B=200mm 0 B=400mm 0
In order to determine the suitability of the SP support, observe the relationship between the bending moment and the traction load which has the most unfavourable effect on the support and check whether it is working within the limits of the safety area. To obtain the pendants deflection, multiply the bending moment (M) by the corresponding supports distortion coefficient (Cd). f=M*Cd
269
BASORSUPPORT SZ
UNE-EN 61537:2007
REV.17/06/2009
www.basor.com
ER 50x50+COVER
Models (L): 300; 400; 500; 600 Finishes: Cincado; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive component - With a metallic finishes; resistance to corrosion Galvanised coating: Class 2 HDG coating: Class 6 - Minimum temperature of -50 C - Maximum temperature of 150 C Related products: - SRB, SCR, SPL, SHL
SZ CEILING
SZ FLOOR
- When the profile works only on one axis, two M12 anchorages shall be used and when the two work axes are required, then four M10 anchorages shall be necessary.
0 M1
SZ CEILING
SZ+SHR 1 AXIS
SZ+SHR 2 AXES
20 Def (mm)
SZ 500
B=200mm 0 B=400mm 0
In order to determine the suitability of the SZ support, observe the relationship between the bending moment and the traction load which has the most unfavourable effect on the support and check whether it is working within the limits of the safety area. To obtain the pendants deflection, multiply the bending moment (M) by the corresponding supports distortion coefficient (Cd). f=M*Cd
270
BASORSUPPORT SPD
UNE-EN 61537:2007
REV.17/06/2009
www.basor.com
ER 50x50+COVER
Models (L): 500;600;700;800;1000 Finishes: HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive component - With a metallic finishes; resistance to corrosion HDG coating: Class 6 - Minimum temperature of -50 C - Maximum temperature of 150 C Related products: - On the profiles open area: SRB, SCR, SPL, SHL, SP, SPD, SHR
SPD CEILING
SPD FLOOR
SPD CEILING
SPD FLOOR
25
SPD 800
SPD 500: Cd=0,147 SPD 600: Cd=0,179 SPD 700: Cd=0,211 SPD 800: Cd=0,263 SPD 1000: Cd=0,316
10
ZS
In order to determine the suitability of the SPD support, observe the relationship between the bending moment and the traction load which has the most unfavourable effect on the support and check whether it is working within the limits of the safety area. To obtain the pendants deflection, multiply the bending moment (M) by the corresponding supports distortion coefficient (Cd). f=M*Cd
271
www.basor.com
160 150 140 130 120 110 100 90 80 70 60 50 40 30 Q (kg) 20 50 50 50 100 100 100 150 200 150 150 250 200 300 250 200 350 300 250 400 350 300 450 500 400 350 550 450 10 0 0 100 200 300 400 500 Q (kg) 600 700 800 900 1000 1100 ZS
L600: Cd=0,069 L1000: Cd=0,092 L1300: Cd=0,117 L1500: Cd=0,138 L2000: Cd=0,172 L3000: Cd=0,275
In order to determine the suitability of the IPN80 profile together with the IPN80 head support, observe the relationship between the bending moment and the traction load which has the most unfavourable effect on the support and check whether it is working within the limits of the safety area. To obtain the pendants deflection, multiply the bending moment (M) by the corresponding supports distortion coefficient (Cd). f=M*Cd
272
BASORSUPPORT SV
UNE-EN 61537:2007
REV.10/06/2009
www.basor.com
SV
ER 50x50+COVER
Models (B): 100; 150; 200; 300; 400; 500; 600. Finishes: GS; HDG Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - With a metallic finishes; resistance to corrosion GS coating: Class 3 HDG coating: Class 6
273
www.basor.com
ERE I304
ER 50x50+COVER
Models (BxH): 100x60;150x60;200x60;300x60. Finishes: I304 Characteristics of the cable tray: - Metallic - Non-flame propagating component - With electrical continuity - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - Resistance to corrosion: Class 9A - Impact resistance: 20J - Classification according to the free base area: Non-perforated tray: A Perforated tray:
Base Models 100 150 200 300 Classification C B C C
Accessories: This family has large array of accessories: Cover, divider, horizontal bend, vertical inside, vertical outside, joint plate.
20
15
274
www.basor.com
ERE I304+COVER
ER 50x50+COVER
Models (BxH): 100x60; 150x60; 200x60; 300x60. Finishes: I304 Characteristics of the trunking: - Metallic system - Impact resistance: 20J - Minimum storage temperature of -45 C - Minimum installation temperature of -25 C - Maximum temperature of 120 C - Non-flame propagating component - System with electrical continuity characteristic - Without electrical insulation characteristic - Level of protection: Non-perforated ERE + ERE cover: IP44 Perforated ERE + ERE cover: IP23 - With high protection outside and inside against corrosive substances - With access cover which can be opened without the need of tools - Possibility of additional internal protective partition.
Accessories: This family has large array of accessories: Divider, horizontal bend, vertical inside, vertical outside, joint plate.
275
www.basor.com
BFR I304
ER 50x50+COVER
Models (BxH): 100x35; 150x35; 200x35; 300x35; 60x65; 100x65; 150x65; 200x65; 300x65; 400x65; 500x65; 600x65; 200x105; 300x105; 400x105; 500x105; 600x105. Finishes: I304 Characteristics of the cable tray: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - Resistance to corrosion: Class 9A - Classification according to the free base area:
Base Models 60 100 150 200 300 400 500 600 Classification Z Y Y Y Y Y Y Y
Accessories: This family has the following accessories: Cover, divider. Union elements: set bolt-staple, lateral joint, set bolt BF-nut and multi-union joint.Fixation elements: SSC, double SL, simple SL, universal support box, mini universal support box.
276
277
www.basor.com
SCR I304
ER 50x50+COVER
Models (B): 50; 100; 150; 200; 300; 400; 500; 600; 750. Finishes: I304 Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive system - Minimum temperature of -50 C - Maximum temperature of 150 C - Resistance to corrosion: Class 9A
SCR 400 SCR 300 SCR 200 SCR 150 SCR 100 SCR 50
278
BASORSUPPORT SV I304
UNE-EN 61537:2007
REV.10/06/2009
www.basor.com
SV I304
ER 50x50+COVER
Models (B): 100; 150; 200; 300. Finishes: I304 Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive component - Minimum temperature of -50 C - Maximum temperature of 150 C - Resistance to corrosion: Class 9A
279
www.basor.com
ER 50x50+COVER
Models (B): 150; 200; 250; 300; 350; 400; 500; 600. Finishes: I304 Characteristics: - Metallic - Non-flame propagating component - With electrical continuity characteristic - Electrically conductive component - Resistance to corrosion: Class 9A - Minimum temperature of -50 C - Maximum temperature of 150 C
280
Def (mm)
www.basor.com
25
L=500 mm L=400 mm
10
ZS
In order to determine the suitability of the PC+HEAD BARCKET support, observe the relationship between the bending moment and the traction load which has the most unfavourable effect on the support and check whether it is working within the limits of the safety area. To obtain the pendants deflection, multiply the bending moment (M) by the corresponding supports distortion coefficient (Cd). f=M*Cd
281
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORPLAST BPB Declares that the product: BASORPLAST BPB
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CE (Directiva de Baja Tensin) 2006/95/CE (Low Voltage Directive) Incorporado en le Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its modification R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 50085-1 UNE EN 50085-2-1 Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
282
BASORPLAST BPB
UNE-EN 50085-2-1:2006
REV.28/05/2009
www.basor.com
BPB
ER 50x50+COVER
Models (HxB): 16x25; 16x40/2; 25x25; 40x40; 40x60; 60x60; 60x100. Finishes: PVCM1 Characteristics of the trunking: - Non-metallic system - Impact resistance: 2J - Minimum temperature of -15 C - Maximum temperature of 60 C - Non-flame propagating component - Without electrical continuity characteristic - With electrical insulating characteristic - Level of protection: IP4X - Interior and exterior high level of protection against corrosive and polluting substances - With access cover which can be opened without the need of tools - M1 fire rating, UNE 23727 - Incandescent self-extinguishing wire at 960 C, UNE 60695-2-1/1 - Inflammability UL 94-VO, AISI/UL 94-1995 - Oxygen level LOI>50%, UNE-EN ISO 4589
283
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORPLAST BPI Declares that the product: BASORPLAST BPI
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 73/23 CEE y su modificacin 93/68 CEE (Directiva de Baja Tensin) 73/23 CEE and its amendment 93/68 CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61537 Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device.
2009
284
BASORPLAST BPI
UNE-EN 61537:2007
REV.17/06/2009
www.basor.com
BASORPLAST BPI
ER 50x50+COVER
Models (HxB): 60x100; 60x150; 60x200; 60x300; 100x200; 100x300; 100x400; 100x600. Finishes: PVCM1 Characteristics of cable tray: Classification according to the free base area: - Non-metallic system Non-perforated tray: Classification A - Impact resistance: 2J, except for Perforated tray: 60x100 which has 10J - Minimum temperature of -20C - Maximum temperature of 60C - Non-flame propagating component - Without electrical continuity characteristic - Electrically non-conductive system component
Base Models 100 150 200 300 400 600 Classification B B B C B B
- Interior and exterior high level of protection against corrosive and polluting substances - M1 fire rating, UNE 23727 - Incandescent self-extinguishing wire at 960C, UNE 60695-2-1/1 - Inflammability UL 94-VO, AISI/UL 94-1995 - Oxygen level LOI>50%, UNE-EN ISO 4589
Accessories: This family has large array of accessories: Cover, divider, horizontal bend, vertical inside, vertical outside, union joint, articulated union joint, angle joint.
285
Note: These SWL are below a temperature of 40C with a distance of 1.5 m between supports and below 60C with a distance of 1 m between supports.
286
287
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORPLAST BPI CON TAPA Declares that the product: BASORPLAST BPI WITH COVER
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 73/23 CEE y su modificacin 93/68 CEE (Directiva de Baja Tensin) 73/23 CEE and its amendment 93/68 CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 50085-1 UNE EN 50085-2-1 Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
2009
288
BASORPLAST BPI+COVER
UNE-EN 50085:2006
REV.28/05/2009
www.basor.com
BPI+COVER
ER 50x50+COVER
Models (HxB): 60x100; 60x150; 60x200; 60x300; 100x200; 100x300; 100x400; 100x600. Finishes: PVCM1 Characteristics of the trunking: - Non-metallic system - Impact resistance: 20J, except for 60x100 which 10J - Minimum temperature of -15C - Maximum temperature of 60C - Non-flame propagating component - Without electrical continuity characteristic - With electrical insulating characteristic - Level of protection against the penetration of solid substances: UNE 20.234: Non-perforated BPI + Cover: IP4X Perforated BPI + Cover: IP2X - Level of protection against mechanical damages, UNE-EN 50.102: IK07 (IK10 with supplementary piece) - Interior and exterior high level of protection against corrosive and polluting substances - With access cover which can be opened without the need of tools. In case suplemmentary piece needed to use a screwdriver - M1 fire rating, UNE 23727 - Incandescent self-extinguishing wire at 960C, UNE 60695-2-1/1 - Inflammability UL 94-VO, AISI/UL 94-1995 - Oxygen level LOI>50%, UNE-EN ISO 4589
Accessories: This family has large array of accessories: Divider, horizontal bend, vertical inside, vertical outside, end cover, lateral junction piece, joint plate, articulated joint, angle joint.
289
BASORSUPPORT SHG
UNE-EN 61537:2007
REV.28/05/2009
www.basor.com
SHG
ER 50x50+COVER
Models (B): 150; 200; 300. Finishes: PVCM1 Caractersticas: - Non-metallic - Non-flame propagating component - Without electrical continuity characteristic - Electrically non-conductive system component - Minimum temperature of -20C - Maximum temperature of 60C - M1 fire rating, UNE 23727 - Incandescent self-extinguishing wire at 960C, UNE 60695-2-1/1 - Inflammability UL 94-VO, AISI/UL 94-1995 - Oxygen level LOI>50%, UNE-EN ISO 4589
290
291
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORCANAL CT Declares that the product: BASORCANAL CT
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 73/23 CEE y su modificacin 93/68 CEE (Directiva de Baja Tensin) 73/23 CEE and its amendment 93/68 CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 50085-1 UNE EN 50085-2-1 Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
292
BASORCANAL CT
UNE-EN 50085:2006
REV.28/05/2009
www.basor.com
CT
ER 50x50+COVER
Models (HxB): 40x80; 40x120; 60x120; 80x140; 80x200; 100x200; 100x300; 100x400; 100x600. Finishes: GSE Characteristics of trunking: - Metallic system - Impact resistance: 20J - Minimum temperature of -45C - Maximum temperature of 120C - Non-flame propagating component - System with electrical continuity characteristic - Without electrical insulating characteristic - Level of protection: IP65 with a buprene union joint IP53 without a buprene union joint - Interior and exterior high level of protection against corrosive and polluting substances - With access cover which can be opened with the help of tools.
293
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A.
www.basor.com
Declara que el producto: BASORTUB R1250 PVC Declares that the product: BASORTUB R1250 PVC Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CE (Directiva de Baja Tensin) 2006/95/CE (Low Voltage Directive) Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61386-1 UNE EN 61386-21 Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device.
2009
294
www.basor.com
R1250 PVC
ER 50x50+COVER
Models: 16, 20, 25, 32, 40, 50, 63 Material: PVC7035 Characteristics of the conduit: - Code: 4321 1254 4010 - Rigid plastic conduit - Compression strenght: 1250N - Impact strenght: 2J - With electrical insulating characteristic - Minimum temperature of -5C - Maximum temperature of 60C - Dielectric rigidity >2000V - Insulation resistance >100M - Non-flame propagating component
Accessories: CP90 elbow, JUR coupler, flexible bend, MCR racor, SPR clip, ABR tie.
295
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A.
www.basor.com
Declara que el producto: BASORTUB R1250 RLH Declares that the product: BASORTUB R1250 RLH Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CE (Directiva de Baja Tensin) 2006/95/CE (Low Voltage Directive) Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61386-1 UNE EN 61386-21 Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device.
296
www.basor.com
R1250 RLH
ER 50x50+COVER
Models: 16, 20, 25, 32, 40, 50, 63 Material: PP7035 Characteristics of the conduit: - Code: 4422 1254 4010 - Halogen free rigid plastic conduit - Compression strenght: 1250N - Impact strenght: 6J - With electrical insulating characteristic - Minimum temperature of -5C - Maximum temperature of 90C - Dielectric rigidity >2000V - Insulation resistance >100M - Non-flame propagating component
Accessories: CP90 elbow, JUR coupler, flexible bend, MCR racor, SPR clip, ABR tie.
297
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A.
www.basor.com
Declara que el producto: BASORTUB RE1250 RLH Declares that the product: BASORTUB RE1250 RLH Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CE (Directiva de Baja Tensin) 2006/95/CE (Low Voltage Directive) Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61386-1 UNE EN 61386-21 Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device.
2009
298
www.basor.com
RE1250 RLH
ER 50x50+COVER
Models: 16, 20, 25, 32, 40, 50, 63 Material: PP7035 Characteristics of the conduit: - Code: 4422 1254 4010 - Halogen free rigid plastic conduit - Compression strenght: 1250N - Impact strenght: 6J - With electrical insulating characteristic - Minimum temperature of -5C - Maximum temperature of 90C - Dielectric rigidity >2000V - Insulation resistance >100M - Non-flame propagating component - Degree of protection against external influences: IP54
Accessories: CP90 elbow, JUR coupler, flexible bend, MCR racor, SPR clip, ABR tie.
299
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORFLEX FLEXL PA6 Declares that the product: BASORFLEX FLEXL PA6
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 2006/95/CE (Directiva de Baja Tensin) 2006/95/CE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 61386-1 UNE EN 61386-23 Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
300
DECLARACION DE CONFORMIDAD DECLARATION OF CONFORMITY La Empresa: BASOR ELECTRIC, S.A. The Company: BASOR ELECTRIC, S.A. Declara que el producto: BASORTRUNKING Declares that the product: BASORTRUNKING
www.basor.com
Instalado de acuerdo con las normas de instalacin, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y utilizado en las aplicaciones para las que est previsto. Installed in accordance with the installation standards, manufacturers instructions and professional rules, and duly maintained and used for the applications for which it is intended. Cumple con los requisitos esenciales de las Directivas del Consejo: Complies with the Council Directives essential requirements: 73/23 CEE y su modificacin 93/68 CEE (Directiva de Baja Tensin) 73/23 CEE and its modification 93/68 CEE (Low Voltage Directive) Incorporado en la Legislacin Espaola en: R.D. 7/1988 y su modificacin R.D. 154/1995. Incorporated in the Spanish Legislation in: R.D. 7/1988 and its amendment R.D. 154/1995. Es adecuado y seguro para el uso a que est destinado y es conforme con la siguiente norma: Is suitable and safe for the intended use and is in conformity with the following standard: UNE EN 60439-1 UNE EN 60439-2 Informacin adicional: Additional information: Este producto est previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idntico. This product is intended to be installed and maintained by skilled professionals, and may only be manipulated by non-skilled people in order to substitute it for an identical device. Ao de fijacin del marcado CE: Year of affixing of the CE marking:
Lugar y Fecha: Place and date:
2009
301
PROFILE 41x21x1.5
Admissible strength Moment of inertia, Ix Moment of inertia, Iy 1.50E+08 N/m 8.66E-09 m4 3.82E-08 m4 1.60E-04 m2 1.44E-04 m2 7.76E-03 m 1.63E-02 m 1.09E-02 m 1.01E-02 m 2.05E-02 m 2.05E-02 m 7.92E-07 m3 1.86E-06 m3 1.19E+02 Nm
Gross area Net area Radius of gyration for x axis Radius of gyration for y axis ex1 ex2 ey1 ey2 Section modulus x axis Section modulus y axis Maximum bending moment
ey1
ey2
Support span
Max. Max. distributed distributed load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 951 475 317 238 190 158 136 109 86 70 58 48 41 36 31 27 24 22 19 17 16 14 13 12 11 10 10 9 8 8 951 475 317 238 155 108 79 61 48 39 32 27 23 20 17 15 13 12 11 10 9 8 7 7 6 6 5 -
Max. concentrated load near center (kg) 475 237 158 118 95 79 67 59 52 47 43 39 36 33 31 29 27 26 25 23 22 21 20 19 19 18 17 16 16 15
Max. Max. concentrated concentrated load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 475 237 158 118 95 79 67 59 52 44 36 30 26 22 19 17 15 13 12 11 10 9 8 8 7 6 6 6 5 475 237 158 118 95 67 49 38 30 24 20 17 14 12 11 9 8 7 7 6 5 5 -
Max. Max. Max. concentrated distributed distributed load (kg) load (kg) for a load (kg) for a deflection of deflection of applied on the outer face L/360 L/200 238 119 79 45 29 20 15 11 9 7 6 5 238 101 45 25 16 11 8 6 718 695 637 545 453 369 302 -
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3
0.07 0.27 0.61 1.09 1.70 2.45 3.34 4.36 5.51 6.81 8.24 9.80 11.50 13.34 15.32 17.43 19.67 22.06 24.57 27.23 30.02 32.95 36.01 39.21 42.55 46.02 49.63 53.37 57.25 61.27
0.05 0.22 0.49 0.87 1.36 1.96 2.63 3.46 4.34 5.39 6.56 7.72 9.06 10.38 11.99 13.61 15.20 17.38 19.65 21.08 23.35 25.62 27.88 30.10 34.02 36.25 38.34 40.25 44.72 46.41
238 119 79 59 48 40 34 30 26 24 22 20 18 17 16 15 14 13 13 12 11 11 10 10 10 9 9 8 8 8
0.16 0.65 1.47 2.61 4.08 5.88 8.01 10.46 13.23 16.34 19.77 23.53 27.61 32.02 36.76 41.82 47.22 52.93 58.98 65.35 72.05 79.07 86.43 94.11 102.11 110.44 119.10 128.09 137.40 147.04
NOTE: In cantilever case, concentrated load on the edge is considered 38% of the distributed
302
PROFILE 41x21x2.5
Admissible strength Moment of inertia, Ix 1.50E+8 N/m 1.17E-8 m4 5.60E-8 m4 2.46E-4 m2 2.14E-4 m2 7.40E-3 m 1.62E-2 m 1.09E-2 m 1.01E-2 m 2.05E-2 m 2.05E-2 m 1.08E-6 m3 2.73E-6 m3 1.61E+2 Nm
Moment of inertia, Iy Gross area Net area Radius of gyration for x axis Radius of gyration for y axis ex1 ex2 ey1 ey2 Section modulus x axis Section modulus y axis
ey1
ey2
Support span
Max. Max. distributed distributed load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 1290 645 430 323 258 215 184 148 117 94 78 66 56 48 42 37 33 29 26 24 21 20 18 16 15 14 13 12 11 10 1290 645 430 323 210 146 107 82 65 52 43 36 31 27 23 20 18 16 15 13 12 11 10 9 8 8 7 7 6 6
Max. concentrated load near center (kg) 645 322 215 161 129 107 92 80 71 64 58 53 49 46 43 40 37 35 33 32 30 29 28 26 25 24 23 23 22 21
Max. Max. concentrated concentrated load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 645 322 215 161 129 107 92 80 71 59 49 41 35 30 26 23 20 18 16 15 13 12 11 10 9 9 8 8 7 7 645 322 215 161 129 91 67 51 40 33 27 23 19 17 15 13 11 10 9 8 7 7 6 6 5 -
Max. Max. Max. concentrated distributed distributed load (kg) load (kg) for a load (kg) for a deflection of deflection of applied on the outer face L/360 L/200 323 161 108 61 39 27 20 15 12 10 8 7 6 5 323 137 62 34 22 15 11 9 7 5 1007 970 882 748 615 501 411 -
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3
1290 645 430 323 258 215 184 161 143 129 117 108 99 92 86 81 76 72 68 65 61 59 56 54 52 50 48 46 44 43
0.07 0.27 0.61 1.09 1.71 2.46 3.35 4.37 5.53 6.83 8.27 9.84 11.55 13.39 15.37 17.49 19.75 22.14 24.66 27.33 30.13 33.07 36.14 39.35 42.70 46.19 49.81 53.57 57.46 61.49
0.05 0.22 0.49 0.87 1.37 1.96 2.67 3.47 4.39 5.42 6.54 7.76 9.12 10.70 12.30 13.88 15.40 17.30 19.18 21.69 23.54 26.17 28.87 30.46 33.10 35.74 38.36 42.78 45.46 48.04
0.16 0.66 1.48 2.62 4.10 5.90 8.03 10.49 13.28 16.40 19.84 23.61 27.71 32.14 36.89 41.98 47.39 53.13 59.20 65.59 72.31 79.37 86.74 94.45 102.49 110.85 119.54 128.56 137.91 147.58
NOTE: In cantilever case, concentrated load on the edge is considered 38% of the distributed
303
PROFILE 41x41x1.5
eje-y ex1
Admissible strength Moment of inertia, Ix Moment of inertia, Iy Gross area Net area Radius of gyration for x axis Radius of gyration for y axis ex1 ex2
1.50E+08 N/m 4.29E-08 m4 5.99E-08 m4 2.15E-04 m2 1.95E-04 m2 1.48E-02 m 1.75E-02 m 2.05E-02 m 2.05E-02 m 2.05E-02 m 2.05E-02 m 2.09E-06 m3 2.92E-06 m3 3.14E+02 Nm
eje-x ex2
ey1 ey2 Section modulus x axis Section modulus y axis Maximum bending moment
ey1
ey2
Support span
Max. Max. distributed distributed load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 2508 1254 836 627 502 418 358 314 279 251 228 209 193 177 154 135 120 107 96 87 78 72 65 60 55 51 47 44 41 38 2508 1254 836 627 502 418 358 300 237 192 159 134 114 98 85 75 67 59 53 48 44 40 36 33 31 28 26 25 23 21
Max. concentrated load near center (kg) 1254 627 418 313 250 209 179 156 139 125 114 104 96 89 83 78 73 69 66 62 59 57 54 52 50 48 46 44 43 41
Max. Max. concentrated concentrated load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 1254 627 418 313 250 209 179 156 139 125 114 104 96 89 83 78 73 67 60 54 49 45 41 38 35 32 30 28 26 24 1254 627 418 313 250 209 179 156 139 120 99 83 71 61 53 47 42 37 33 30 27 25 23 21 19 18 16 15 14 13
Max. Max. Max. concentrated distributed distributed load (kg) load (kg) for a load (kg) for a deflection of deflection of applied on the outer face L/360 L/200 627 314 209 157 125 100 74 56 45 36 30 25 21 18 16 14 12 11 10 9 8 7 7 6 6 5 627 314 209 125 80 56 41 31 25 20 17 14 12 10 9 8 7 6 6 5 1004 997 980 958 921 870 801 731 658 594 532 480 431 390 -
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3
2508 1254 836 627 502 418 358 314 279 251 228 209 193 179 167 157 148 139 132 125 119 114 109 105 100 96 93 90 86 84
0.04 0.14 0.33 0.58 0.91 1.30 1.78 2.32 2.93 3.62 4.38 5.22 6.12 7.10 8.15 9.27 10.47 11.74 13.08 14.49 15.98 17.53 19.16 20.87 22.64 24.49 26.41 28.40 30.47 32.61
0.03 0.12 0.26 0.46 0.72 1.04 1.42 1.85 2.34 2.89 3.51 4.15 4.87 5.64 6.47 7.38 8.29 9.30 10.46 11.46 12.63 14.03 15.18 16.61 18.06 19.50 20.93 22.32 24.24 25.58
0.09 0.35 0.78 1.39 2.17 3.13 4.26 5.56 7.04 8.69 10.52 12.52 14.69 17.04 19.56 22.26 25.13 28.17 31.39 34.78 38.34 42.08 45.99 50.08 54.34 58.78 63.38 68.17 73.12 78.25
NOTE: In cantilever case, concentrated load on the edge is considered 38% of the distributed
304
PROFILE 41x41x2.5
eje-y ex1
Admissible strength Moment of inertia, Ix Moment of inertia, Iy Gross area Net area Radius of gyration for x axis Radius of gyration for y axis ex1 ex2
1.50E+08 N/m 6.56E-08 m4 9.32E-08 m4 3.46E-04 m2 3.13E-04 m2 1.45E-02 m 1.73E-02 m 2.07E-02 m 2.03E-02 m 2.05E-02 m 2.05E-02 m 3.16E-06 m3 4.54E-06 m3 4.74E+02 Nm
eje-x ex2
ey1 ey2 Section modulus x axis Section modulus y axis Maximum bending moment
ey1
ey2
Support span
Max. Max. distributed distributed load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 3795 1897 1265 949 759 632 542 474 422 379 345 316 292 270 235 206 183 163 146 132 120 109 100 92 85 78 73 67 63 59 3795 1897 1265 949 759 632 542 459 363 294 243 204 174 150 131 115 102 91 81 73 67 61 56 51 47 43 40 37 35 33
Max. concentrated load near center (kg) 1897 948 632 474 379 316 271 237 210 189 172 158 145 135 126 118 111 105 99 94 90 86 82 79 75 72 70 67 65 63
Max. Max. concentrated concentrated load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 1897 948 632 474 379 316 271 237 210 189 172 158 145 135 126 118 111 102 92 83 75 68 62 57 53 49 45 42 39 37 1897 948 632 474 379 316 271 237 210 184 152 128 109 94 82 72 64 57 51 46 42 38 35 32 29 27 25 23 22 20
Max. Max. Max. concentrated distributed distributed load (kg) load (kg) for a load (kg) for a deflection of deflection of applied on the outer face L/360 L/200 949 474 316 237 190 153 112 86 68 55 46 38 33 28 25 22 19 17 15 14 12 11 10 10 9 8 8 7 7 6 949 474 316 191 122 85 62 48 38 31 25 21 18 16 14 12 11 9 8 8 7 6 6 5 1538 1528 1504 1466 1405 1326 1222 1109 1001 899 806 730 657 593 -
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3
3795 1897 1265 949 759 632 542 474 422 379 345 316 292 271 253 237 223 211 200 190 181 172 165 158 152 146 141 136 131 126
0.04 0.14 0.32 0.57 0.90 1.29 1.76 2.30 2.91 3.59 4.34 5.17 6.07 7.03 8.08 9.19 10.37 11.63 12.96 14.36 15.83 17.37 18.99 20.67 22.43 24.26 26.17 28.14 30.19 32.30
0.03 0.11 0.26 0.46 0.72 1.03 1.41 1.84 2.32 2.86 3.46 4.13 4.82 5.61 6.44 7.31 8.25 9.27 10.28 11.38 12.61 13.86 15.01 16.53 17.73 19.15 20.85 22.26 23.99 25.74
0.09 0.34 0.78 1.38 2.15 3.10 4.22 5.51 6.98 8.61 10.42 12.40 14.56 16.88 19.38 22.05 24.89 27.91 31.01 34.46 37.99 41.69 45.57 49.62 53.84 58.23 62.80 67.53 72.45 77.53
NOTE: In cantilever case, concentrated load on the edge is considered 38% of the distributed
305
eje-y ex1
PROFILE 41x82x2.5
Admissible strength Moment of inertia, Ix Moment of inertia, Iy Gross area Net area Radius of gyration for x axis Radius of gyration for y axis ex1 ex2 1.50E+8 N/m 3.89E-7 m4 1.87E-7 m4 6.92E-4 m2 6.37E-4 m2 2.47E-2 m 1.71E-2 m 4.10E-2 m 4.10E-2 m 2.05E-2 m 2.05E-2 m 9.49E-6 m3 9.11E-6 m3 1.42E+3 Nm
eje-x ex2
ey1 ey2 Section modulus x axis Section modulus y axis Maximum bending moment*
ey1 ey2
Support span
Max. Max. distributed distributed load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 11384 5692 3795 2846 2277 1897 1626 1423 1265 1138 1035 949 876 813 759 711 670 632 599 569 542 517 495 474 455 438 422 400 373 348 11384 5692 3795 2846 2277 1897 1626 1423 1265 1138 1035 949 876 813 759 681 603 538 483 436 395 360 329 303 279 258 239 222 207 194
Max. concentrated load near center (kg) 5691 2845 1897 1422 1138 948 813 711 632 569 517 474 437 406 379 355 334 316 299 284 271 258 247 237 227 218 210 203 196 189
Max. Max. concentrated concentrated load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 5691 2845 1897 1422 1138 948 813 711 632 569 517 474 437 406 379 355 334 316 299 284 271 258 247 237 227 218 210 203 196 189 5691 2845 1897 1422 1138 948 813 711 632 569 517 474 437 406 379 355 334 316 299 272 247 225 206 189 174 161 149 139 129 121
Max. Max. Max. concentrated distributed distributed load (kg) load (kg) for a load (kg) for a deflection of deflection of applied on the outer face L/360 L/200 2846 1423 949 711 569 474 407 356 316 285 259 227 193 167 145 128 113 101 91 82 74 68 62 57 52 48 45 42 39 36 2846 1423 949 711 569 474 370 284 224 182 150 126 107 93 81 71 63 56 50 45 41 38 34 32 29 27 25 23 22 20 2546 2533 2513 2487 2436 2358 2263 2137 1998 1866 1728 1592 1477 1359 1252 1154 1073 -
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3
11384 5692 3795 2846 2277 1897 1626 1423 1265 1138 1035 949 876 813 759 711 670 632 599 569 542 517 495 474 455 438 422 407 393 379
0.02 0.07 0.16 0.29 0.45 0.65 0.89 1.16 1.47 1.81 2.20 2.61 3.07 3.56 4.08 4.65 5.24 5.88 6.55 7.26 8.00 8.78 9.60 10.45 11.34 12.27 13.23 14.23 15.26 16.33
0.01 0.06 0.13 0.23 0.36 0.52 0.71 0.93 1.18 1.45 1.76 2.09 2.45 2.84 3.26 3.71 4.19 4.70 5.23 5.80 6.40 7.01 7.67 8.36 9.05 9.77 10.54 11.37 12.19 13.02
2846 1423 949 711 569 474 407 356 316 285 259 237 219 203 190 178 167 158 150 142 136 129 124 119 114 109 105 102 98 95
0.04 0.17 0.39 0.70 1.09 1.57 2.13 2.79 3.53 4.36 5.27 6.27 7.36 8.54 9.80 11.15 12.59 14.11 15.72 17.42 19.21 21.08 23.04 25.09 27.22 29.44 31.75 34.15 36.63 39.20
NOTE: In cantilever case, concentrated load on the edge is considered 38% of the distributed * Load information for the profiles regular work axis (x axis).
306
CT 20x10x1
Admissible strength Moment of inertia, Ix Moment of inertia, Iy Gross area 1.50E+08 N/m 4.82E-10 m4 2.48E-09 m4 4.43E-05 m2 3.58E-05 m2 3.67E-03 m 8.33E-03 m 5.19E-03 m 4.81E-03 m 1.00E-02 m 1.00E-02 m 9.29E-08 m3 2.48E-07 m3 1.39E+01 Nm
ex1
eje-y eje-x
Net area Radius of gyration for x axis Radius of gyration for y axis ex1 ex2 ey1
ex2
ey2 Section modulus x axis Section modulus y axis Maximum bending moment
ey1 ey2
Support span
Max. Max. distributed distributed load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 112 56 37 24 16 11 8 6 112 54 24 14 9 6 -
Max. Max. concentrated concentrated load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 55 27 18 13 10 7 55 27 15 8 5 -
Max. Max. Max. concentrated distributed distributed load (kg) load (kg) for a load (kg) for a deflection of deflection of applied on the outer face L/360 L/200 28 10 23 6 171 130 85 -
112 56 37 28 22 19 16 14
28 14 9 7 6 5 4 3
NOTE: In cantilever case, concentrated load on the edge is considered 38% of the distributed
307
CT 30x30x1.5
Admissible strength Moment of inertia, Ix 1.50E+8 N/m 1.41E-8 m4 2.17E-8 m4 1.53E-4 m2 1.28E-4 m2 1.05E-2 m 1.30E-2 m 1.34E-2 m 1.66E-2 m 1.50E-2 m 1.50E-2 m 8.51E-7 m3 1.45E-6 m3 1.28E+2 Nm
eje-y ex1
Moment of inertia, Iy Gross area Net area Radius of gyration for x axis Radius of gyration for y axis ex1 ex2
eje-x
ex2
ey1
ey2
Support span
Max. Max. distributed distributed load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 1022 511 341 255 204 170 146 128 114 102 93 79 67 58 51 45 39 35 32 29 26 24 22 20 18 17 16 15 14 13 1022 511 341 255 204 170 129 99 78 63 52 44 37 32 28 25 22 20 18 16 14 13 12 11 10 9 9 8 8 7
Max. concentrated load near center (kg) 510 255 170 127 102 85 72 63 56 51 46 42 39 36 34 31 30 28 26 25 24 23 22 21 20 19 18 18 17 17
Max. Max. concentrated concentrated load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 510 255 170 127 102 85 72 63 56 51 46 42 39 36 32 28 25 22 20 18 16 15 14 12 11 11 10 9 9 8 510 255 170 127 102 85 72 62 49 40 33 28 23 20 18 15 14 12 11 10 9 8 8 7 6 6 5 5 -
Max. Max. Max. concentrated distributed distributed load (kg) load (kg) for a load (kg) for a deflection of deflection of applied on the outer face L/360 L/200 255 128 85 64 48 33 24 19 15 12 10 8 7 6 5 255 128 73 41 26 18 14 10 8 7 5 550 540 524 494 450 401 351 307 268 234 -
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3
1022 511 341 255 204 170 146 128 114 102 93 85 79 73 68 64 60 57 54 51 49 46 44 43 41 39 38 37 35 34
1 1 1 1 2 2 3 3 4 5 6 7 8 9 11 12 13 15 17 18 20 22 24 26 29 31 33 36 38 41
1 1 1 1 1 2 2 3 3 4 5 6 7 7 9 9 11 12 13 15 16 18 19 21 22 24 25 28 30 33
255 128 85 64 51 43 37 32 28 26 23 21 20 18 17 16 15 14 13 13 12 12 11 11 10 10 10 9 9 9
1 1 1 2 3 4 6 7 9 11 14 16 19 22 25 28 32 35 39 44 48 53 57 62 68 73 79 85 91 97
NOTE: In cantilever case, concentrated load on the edge is considered 38% of the distributed
308
CT 40x20x1.5
Admissible strength Moment of inertia, Ix Moment of inertia, Iy 1.50E+08 N/m 7.23E-09 m4 3.21E-08 m4 1.36E-04 m2 1.24E-04 m2 7.64E-03 m 1.61E-02 m 1.13E-02 m 8.71E-03 m 2.00E-02 m 2.00E-02 m 6.40E-07 m3 1.60E-06 m3 9.60E+01 Nm
ex1
eje-y eje-x
Gross area Net area Radius of gyration for x axis Radius of gyration for y axis ex1 ex2 ey1 ey2
ex2
ey1
ey2
Support span
Max. Max. distributed distributed load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 768 384 256 192 154 128 110 91 72 58 48 40 34 30 26 23 20 18 16 15 13 12 11 10 9 9 8 7 7 6 768 384 256 192 129 90 66 51 40 32 27 22 19 17 14 13 11 10 9 8 7 7 6 6 5 -
Max. Max. concentrated concentrated load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 384 192 128 96 76 64 54 48 42 36 30 25 22 19 16 14 13 11 10 9 8 8 7 6 6 5 384 192 128 96 76 56 41 32 25 20 17 14 12 10 9 8 7 6 6 5 -
Max. Max. Max. concentrated distributed distributed load (kg) load (kg) for a load (kg) for a deflection of deflection of applied on the outer face L/360 L/200 192 96 64 38 24 17 12 9 7 6 5 192 84 37 21 13 9 7 5 580 560 515 444 368 300 248 -
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3
0.07 0.26 0.59 1.05 1.65 2.37 3.23 4.22 5.34 6.59 7.97 9.49 11.14 12.92 14.83 16.87 19.05 21.35 23.79 26.36 29.06 31.90 34.86 37.96 41.19 44.55 48.04 51.67 55.42 59.31
0.05 0.21 0.47 0.84 1.30 1.90 2.54 3.37 4.20 5.22 6.21 7.59 8.75 10.17 11.58 13.50 14.84 16.81 18.83 20.87 22.89 24.85 26.73 30.37 32.18 33.78 37.83 39.18 43.53 44.48
192 96 64 48 38 32 27 24 21 19 17 16 15 14 13 12 11 11 10 10 9 9 8 8 8 7 7 7 7 6
0.16 0.63 1.42 2.53 3.95 5.69 7.75 10.12 12.81 15.82 19.14 22.78 26.73 31.00 35.59 40.49 45.71 51.25 57.01 63.27 69.75 76.55 83.67 91.10 98.85 106.92 115.30 124.00 133.02 142.35
NOTE: In cantilever case, concentrated load on the edge is considered 38% of the distributed
309
PC PROFILE
Admissible strength 1.50E+08 N/m 2.53E-08 m4 1.10E-07 m4 2.45E-04 m2 1.76E-04 m2 1.20E-02 m 2.50E-02 m 2.35E-02 m 1.15E-02 m 2.90E-02 m 2.90E-02 m 1.08E-06 m3 3.79E-06 m3 1.61E+02 Nm
Moment of inertia, Ix Moment of inertia, Iy Gross area Net area Radius of gyration for x axis Radius of gyration for y axis ex1 ex2 ey1 ey2 Section modulus x axis Section modulus y axis Maximum bending moment
Support span
Max. Max. distributed distributed load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 1291 646 430 323 258 215 184 161 143 129 117 108 99 92 86 80 71 63 57 51 46 42 39 35 33 30 28 26 24 23 1291 646 430 323 258 215 184 161 140 113 94 79 67 58 50 44 39 35 31 28 26 23 21 20 18 17 16 14 13 13
Max. concentrated load near center (kg) 645 322 215 161 129 107 92 80 71 64 58 53 49 46 43 40 37 35 33 32 30 29 28 26 25 24 23 23 22 21
Max. Max. concentrated concentrated load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 645 322 215 161 129 107 92 80 71 64 58 53 49 46 43 40 37 35 33 32 29 26 24 22 20 19 17 16 15 14 645 322 215 161 129 107 92 80 71 64 58 49 42 36 31 28 25 22 20 18 16 15 13 12 11 10 10 9 8 8
Max. Max. Max. concentrated distributed distributed load (kg) load (kg) for a load (kg) for a deflection of deflection of applied on the outer face L/360 L/200 323 161 108 81 65 54 43 33 26 21 18 15 13 11 9 8 7 7 6 5 323 161 108 74 47 33 24 18 15 12 10 8 7 6 5 544 540 532 518 492 461 424 387 353 319 288 262 -
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3
1291 646 430 323 258 215 184 161 143 129 117 108 99 92 86 81 76 72 68 65 61 59 56 54 52 50 48 46 45 43
0.03 0.13 0.28 0.51 0.79 1.14 1.55 2.02 2.56 3.16 3.83 4.55 5.35 6.20 7.12 8.01 9.14 10.25 11.42 12.65 13.95 15.31 16.73 18.22 19.77 21.38 23.06 24.80 26.60 28.47
0.03 0.10 0.23 0.40 0.63 0.91 1.24 1.61 2.03 2.51 3.03 3.59 4.22 4.95 5.69 6.42 7.12 8.00 8.87 10.03 10.89 12.10 13.35 14.09 15.31 16.53 17.74 19.79 21.03 22.22
0.08 0.30 0.68 1.21 1.90 2.73 3.72 4.86 6.15 7.59 9.19 10.93 12.83 14.88 17.08 19.43 21.94 24.60 27.40 30.36 33.48 36.74 40.16 43.73 47.45 51.32 55.34 59.52 63.84 68.32
NOTE: In cantilever case, concentrated load on the edge is considered 38% of the distributed
310
RA 35x14x1.5
Admissible strength Moment of inertia, Ix Moment of inertia, Iy Gross area 1.50E+8 N/m 2.83E-9 m4 1.82E-8 m4 9.82E-5 m2 1.11E-4 m2 5.05E-3 m 1.28E-2 m 6.38E-3 m 7.62E-3 m 1.75E-2 m 1.75E-2 m 3.72E-7 m3 1.04E-6 m3 5.58E+1 Nm
ex1
eje-y eje-x
Net area Radius of gyration for x axis Radius of gyration for y axis ex1 ex2 ey1
ex2
ey2 Section modulus x axis Section modulus y axis Maximum bending moment
ey1
ey2
Support span
Max. Max. distributed distributed load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 446 223 149 112 89 64 47 36 28 23 19 16 14 12 10 9 8 7 6 6 5 446 223 141 79 51 35 26 20 16 13 11 9 8 7 6 -
Max. Max. concentrated concentrated load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 223 111 74 55 44 37 29 22 18 14 12 10 8 7 6 6 223 111 74 50 32 22 16 12 10 8 7 6 -
Max. Max. Max. concentrated distributed distributed load (kg) load (kg) for a load (kg) for a deflection of deflection of applied on the outer face L/360 L/200 112 56 26 15 10 7 112 33 15 8 5 499 448 354 264 199 -
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3
1 1 1 2 3 4 5 7 8 10 12 15 17 20 22 25 29 32 36 40 44 48 52 57 62 67 72 77 83 88
1 1 1 2 2 3 4 5 7 8 10 11 14 15 17 19 23 25 27 31 33 38 39 44 44 50 56 54 60 67
112 56 37 28 22 19 16 14 12 11 10 9 9 8 7 7 7 6 6 6 5 5 5 5 5 4 4 4 4 4
1 1 3 4 6 9 12 15 19 24 29 34 40 46 53 60 68 76 85 94 104 114 124 135 147 159 171 184 198 211
NOTE: In cantilever case, concentrated load on the edge is considered 38% of the distributed
311
RA 50x14x1.5
Admissible strength Moment of inertia, Ix Moment of inertia, Iy Gross area 1.50E+08 N/m 3.42E-09 m4 4.45E-08 m4 1.33E-04 m2 1.21E-04 m2 5.32E-03 m 1.92E-02 m 9.11E-03 m 4.89E-03 m 2.50E-02 m 2.50E-02 m 3.75E-07 m3 1.78E-06 m3 5.63E+01 Nm
ex1
eje-y eje-x
Net area Radius of gyration for x axis Radius of gyration for y axis ex1 ex2 ey1
ex2
ey2 Section modulus x axis Section modulus y axis Maximum bending moment
ey1
ey2
Support span
Max. Max. distributed distributed load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 450 225 150 113 90 75 56 43 34 28 23 19 16 14 12 11 10 9 8 7 6 6 5 450 225 150 96 61 43 31 24 19 15 13 11 9 8 7 6 5 -
Max. Max. concentrated concentrated load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 225 112 75 56 45 37 32 27 21 17 14 12 10 9 8 7 6 5 225 112 75 56 38 27 20 15 12 10 8 7 6 -
Max. Max. Max. concentrated distributed distributed load (kg) load (kg) for a load (kg) for a deflection of deflection of applied on the outer face L/360 L/200 113 56 32 18 11 8 6 113 40 18 10 6 454 421 350 274 214 -
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3
0.08 0.33 0.74 1.31 2.04 2.94 4.00 5.23 6.62 8.17 9.88 11.76 13.80 16.01 18.38 20.91 23.60 26.46 29.48 32.67 36.02 39.53 43.21 47.04 51.05 55.21 59.54 64.03 68.69 73.51
0.07 0.26 0.59 1.04 1.63 2.32 3.19 4.16 5.29 6.39 7.73 9.03 10.84 12.75 14.70 16.65 18.54 20.32 21.90 25.55 26.89 30.91 31.79 36.12 40.83 40.82 45.71 50.98 49.56 54.87
113 56 38 28 23 19 16 14 13 11 10 9 9 8 8 7 7 6 6 6 5 5 5 5 5 4 4 4 4 4
0.20 0.78 1.76 3.14 4.90 7.06 9.60 12.55 15.88 19.60 23.72 28.23 33.13 38.42 44.10 50.18 56.65 63.51 70.76 78.41 86.44 94.87 103.69 112.91 122.51 132.51 142.90 153.68 164.85 176.42
NOTE: In cantilever case, concentrated load on the edge is considered 38% of the distributed
312
PROFILE Z
ey1
ey2
Admissible strength Moment of inertia, Ix Moment of inertia, Iy Gross area Net area Radius of gyration for x axis
1.50E+08 N/m 8.59E-08 m4 5.83E-08 m4 3.30E-04 m2 1.98E-04 m2 2.08E-02 m 1.72E-02 m 2.35E-02 m 2.35E-02 m 3.35E-02 m 3.35E-02 m 3.65E-06 m3 1.74E-06 m3 5.48E+02 Nm
Radius of gyration for y axis ex1 ex2 ey1 ey2 Section modulus x axis Section modulus y axis Maximum bending moment*
Support span
Max. Max. distributed distributed load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 4385 2193 1462 1096 877 731 626 548 487 439 399 365 337 313 292 271 240 214 192 173 157 143 131 120 111 102 95 88 82 77 4385 2193 1462 1096 877 731 626 548 475 385 318 267 228 196 171 150 133 119 107 96 87 79 73 67 62 57 53 49 46 43
Max. concentrated load near center (kg) 2192 1096 730 548 438 365 313 274 243 219 199 182 168 156 146 137 128 121 115 109 104 99 95 91 87 84 81 78 75 73
Max. Max. concentrated concentrated load (kg) for a load (kg) for a deflection of deflection of L/360 L/200 2192 1096 730 548 438 365 313 274 243 219 199 182 168 156 146 137 128 121 115 108 98 89 82 75 69 64 59 55 51 48 2192 1096 730 548 438 365 313 274 243 219 199 167 142 123 107 94 83 74 67 60 55 50 45 42 38 36 33 31 29 27
Max. Max. Max. concentrated distributed distributed load (kg) load (kg) for a load (kg) for a deflection of deflection of applied on the outer face L/360 L/200 1096 548 365 274 219 183 147 113 89 72 60 50 43 37 32 28 25 22 20 18 16 15 14 13 12 11 10 9 9 8 1096 548 365 250 160 111 82 63 49 40 33 28 24 20 18 16 14 12 11 10 9 8 8 7 6 6 5 5 618 615 611 606 596 582 563 537 511 481 451 423 395 367 344 320 298 -
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3
4385 2193 1462 1096 877 731 626 548 487 439 399 365 337 313 292 274 258 244 231 219 209 199 191 183 175 169 162 157 151 146
1 1 1 1 1 2 2 3 3 4 4 5 6 7 8 9 10 11 12 13 14 16 17 19 20 22 24 25 27 29
1 1 1 1 1 1 2 2 3 3 4 4 5 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 22 23
1096 548 365 274 219 183 157 137 122 110 100 91 84 78 73 69 64 61 58 55 52 50 48 46 44 42 41 39 38 37
1 1 1 2 2 3 4 5 7 8 10 11 13 15 18 20 22 25 28 31 34 37 41 44 48 52 56 60 64 69
NOTE: In cantilever case, concentrated load on the edge is considered 38% of the distributed * Load information for the profiles regular work axis (x axis).
313
http://tools.basor.com
314
OFFICES
HEAD OFFICE
BASOR ELECTRIC, S.A. P.I. ALCODAR AVDA. ALCODAR, 45-47 / Apdo. 244 46701 GANDIA (VALENCIA) ESPAA basor@basor.com T. 902.995.920 F. 902.995.921
PRODUCTION CENTRES
GANDIA P.I. ALCODAR AVDA. ALCODAR, 45-47 46701 GANDIA (VALENCIA) ESPAA CASTELL DE RUGAT P.I. EL MOL C/ DEL MIG DIA, S/N 46841 CASTELL DE RUGAT (VALENCIA) ESPAA ALMANSA P.I. EL MUGRN FASE 3 C/ TONELEROS, S/N MANZANA A-1 02640 ALMANSA (ALBACETE) ESPAA
OFFICES IN SPAIN
DELEGACIN LEVANTE P.I. FUENTE DEL JARRO 2 FASE C/ CIUDAD DE CARTAGENA, 29 46988 PATERNA (VALENCIA) zona_levante@basor.com T. 902.995.920 F. 902.995.921 DELEGACIN NOROESTE C/ RICARDO MELLA, 93, INT 36213 VIGO (PONTEVEDRA) T. 986.22.65.35 F. 986.43.72.12 DELEGACIN CENTRO P.I. LOS ANGELES C/ CARPINTEROS, 32 28906 GETAFE (MADRID) zona_centro@basor.com T. 916.832.518 F. 916.816.899 DELEGACIN SUR P.I. EL PINO C/ PINO ESTROBO, 9 41016 SEVILLA zona_andalucia@basor.com T. 954.512.163 F. 901.020.543 DELEGACION NORDESTE P.I. MOL DEL FRARES C/ CALLE A, 45 08620 SANT VICEN DELS HORTS (BARCELONA) zona_nordeste@basor.com T. 936.568.167 F. 936.568.168
315