Académique Documents
Professionnel Documents
Culture Documents
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S01 LA1.S01.1 Computer Security Measures Apply Correct Security Procedures Using Antivirus Demonstration
MARK
CRITERIA 1. Choose antivirus software to be used. Write the name of the antivirus software. 2. Start the antivirus software and select area to be scanned. State the area selected. 3. Scan the selected area. Copy scan summary. 4. Choose and apply any or all of the following when virus is detected delete/remove, clean/heal, quarantine/move to vault. State action taken
EVIDENCE
NOTE Use any antivirus software available e.g. Kaspersky, McAfee Virus Scan, Norton Antivirus, Trend Micro PC-Cillin, Dr Solomon, AVG, etc. Scan area can be specific folder, floppy disk, or flash memory.
Completed ACF.CW.LA1.S01.1.
Candidate can print screen the scan summary. If no virus is detected, criterion four is considered done. Write No action taken. Values: nt sible Confide Respon
TOTAL MARK
TOC.CW.LA1.S01.2
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S01 LA1.S01.2 Computer Security Measures Apply Correct Security Procedures Using Anti-Spyware Demonstration
MARK
CRITERIA 1. Choose antispyware software to be used. Write the name of the anti-spyware software. 2. Start the antispyware software and choose a scan mode. State the scan mode selected. 3. Scan the selected area. Copy scan summary. 4. Choose and apply any of the following when spyware is detected remove/quarantine the identified object(s). State the action taken.
EVIDENCE
NOTE Suggested antispyware software: Lavasoft Ad-Aware SE Personal. Print screen can be used to display scan summary. If no spyware is detected, criterion four is considered done. Write No action taken. Values: Confident Responsible
Completed ACF.CW.LA1.S01.2
TOTAL MARK
TOC.CW.LA1.AS02.1
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S02 LA1.S02.1 Impact of ICT on Society Locate and present information on impact of ICT on society Verbal Presentation
MARK
CRITERIA 1. Locate information from more than one source. Write the number of sources referred. 2. Present the information in 5 to 10 slides. Write the number of slides used. 3. Presentation includes: a. Topic b. Content c. Conclusion d. Sources of reference Submit a soft copy or hard copy of the presentation. 4. Display cooperation. a. Write the names of group members. b. Verbal verification from group members OR assessors observation.
EVIDENCE
NOTE Suggested antispyware software: Lavasoft Ad-Aware SE Personal. Print screen can be used to display scan summary. If no spyware is detected, criterion four is considered done. Write No action taken. Values: Confident Responsible
Completed ACF.CW.LA1.S01.2
10
TOTAL MARK
TOC.CW.LA2.S03.1
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S03 LA2.S03.1 PC Assembling Assemble the components of a PC Demonstration
MARK 1. 2
CRITERIA Fix the processor correctly. Write processor specification. Fix the RAM correctly. Write RAM capacity. Install the power supply unit correctly. Write power (W) and voltage (V) of unit. Install the hard disk correctly. Write hard disk capacity.
EVIDENCE
NOTE CAUTION: Assessor must make sure that the processor is properly fixed by the candidate to avoid permanent damage to it. Installation of floppy drive OR optical drive is required if and only if they come with the PC. Candidates must connect all necessary cables.
2. 2 3. 2 4. 2
5. Install the floppy drive AND/OR optical drive correctly. Write drive(s) installed. 6. Boot up the computer successfully. 7. Check BIOS setup. a. Hard disk detected b. Floppy drive AND/OR optical drive detected
Completed ACF.CW.LA2.S03.1
13
TOTAL MARK
TOC.CW.LA2.SO4.1
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S04 LA2.S04.1 Software Installation Install operating system, application software and utility program Demonstration
MARK 1. 3
CRITERIA Install an operating system. Write the name of the operating system installed. Install application software. Write the name of the application software installed. 3. Install a utility program. Write the name of the utility program installed.
EVIDENCE
NOTE Suggested antispyware software: Lavasoft Ad-Aware SE Personal. Print screen can be used to display scan summary. If no spyware is detected, criterion four is considered done. Write No action taken. Values: Confident Responsible
2. 3
Completed ACF.CW.LA1.S01.2
TOTAL MARK
TOC.CW.LA2.S05.1
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S05 LA2.S05.1 Current and Future Development of Open Source Software and Latest Development in ICT Explain the latest open source software available and the latest development in ICT Written Assignment
MARK
EVIDENCE
NOTE Candidate works in groups of 2 to 4 to conduct study AND/OR for discussion. Written assignment MUST be done individually. Refer to WAF.CW.LA2.S05.1. Suggested duration: 2 to 4 weeks Values: Appreciate Cooperate Confident
b. TWO examples
2. Explain the latest open source application software a. Meaning
b. TWO examples
3. Explain the latest development in ICT a. ONE hardware b. ONE software 4. Explain pervasive computing a. Meaning
Written Assignment
b. TWO examples
Follow required written assignment format: a. content format b. document format Display cooperation. a. Write the names of group members. b. Verbal verification from group members or assessors observation. TOTAL MARK
20
WAF.CW.LA2.S05.1
COMPUTER SYSTEM
Current and Future Development of Open Source Software and Latest Development in ICT Explain the latest open source software available and the latest development in ICT Written Assignment
page margin - top, bottom, left, and right: 1, paper size - A4 line spacing - 1.5 lines typeface - Times New Roman, font size- - 12 pts (content), and14 pts for title/heading
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S06 LA3.S06.1 Network Facilities Setup Crimp and Test UTP Cables Demonstration
MARK
CRITERIA
1. Crimp a Straight Cable Skin off the cable jacket. Untwist and straighten each wire. Arrange the wires according to the 568B wiring schematic order for both ends. Cut and insert the wires into a RJ45 connector. Crimp the cable using a crimping tool. (assessment done on final product)
EVIDENCE
NOTE At least 1 meter of UTP cable is recommended. Candidate may refer to the wiring schematic manual in the Learning Module. The cables must be labelled and kept in a safe place Values: Precise Confident Abide
Crimp the cable using crimping tool. (assessment done on final product)
4 Check the crossed cable is crimped successfully using a cable tester. TOTAL MARK
TOC.CW.LA3.S06.2
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S06 LA3.S06.2 Network Facilities Setup Configure and Test Network Connection Demonstration
MARK 1. 2 2. 2
CRITERIA Set an IP Address. Write the IP address. Set a Subnet Mask. Write the subnet mask. Choose another computer to test the configuration. Write the IP address of the computer.
EVIDENCE
NOTE IP Address and Subnet Mask given by the assessor. Values: accurate confident responsible abide
3. 1
Completed ACF.CW.LA3.S06.2
4. Ping the other computer. Copy the ping result. TOTAL MARK
TOC.CW.LA3.S07.1
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S07 LA3.S07.1 Current and Future Development in Networks and Communications. Describe the Latest Development in Networks and Communications Written Assignment
MARK 1. 8
CRITERIA Describe Mobile Computing a. definition b. specifications, services, frequencies 2. Describe Internet Technology and Services a. VoIP b. BLOG Describe types of network a. PAN, b. VPN, c. WLAN, d. WIMAX
EVIDENCE
NOTE Candidates work in groups of 2 to 4 to conduct the study and for discussion. Written assignment must be done individually. Suggested duration: 2 to 4 weeks
Written Assignment
3. 8
4. 2
Follow required written assignment format: content format document format 5. Display cooperation. a. Write the names of group members. b. Verbal verification from group members or assessors observation TOTAL MARK
24
WAF.CW.LA3.S07.1
Instruction: Work in groups of two to four to find information and discuss on the latest development in Networks and Communications. Complete this written assignment individually. You are given two to four weeks to complete this assignment. Content format 1.0 Introduction (Computer Networks and Communications) 2.0 Mobile Computing 2.1 Definition 2.2 Specification, services, and frequencies of Mobile Computing (based on one product e.g. PDA, 3G mobile phone) 3.0 Internet Technology and Services 3.1 VoIP 3.2 BLOG 4.0 Types of network. 4.1 PAN 4.2 VPN 4.3 WLAN 4.4 WIMAX 5.0 Conclusion (Computer Networks and Communications) Reference (give at least two sources of reference) Document Format (use Word Processor) cover page o Candidates details o Title: The Latest Development in Networks and Communications page margin - top, bottom, left, and right: 1, paper size - A4 line spacing: 1.5 lines
typeface - Times New Roman, font size - 12 pts (content), 14 pts for title/heading number of pages - 3 to 10
TOC.CW.LA4.S08.1
TABLE OF CONSTRUCT
Construct Aspect Instrument MARK : : : S08 LA4.S08.1 Multimedia Development Apply All The Phases Of Multimedia Production To Produce An Interactive Educational Multimedia Project. Project CRITERIA 1. Analysis Phase Write the project title, objective and target audience. EVIDENCE NOTE The multimedia product must be interactive, educational and include all five multimedia elements. Choose any topic from any subjects taught in school: ICT Bahasa Malaysia Bahasa Inggeris Mathematics Science, etc Completed RF.CW.LA4.S08.1 and a soft copy of the product. Authoring Tools: Tool book Presentation s/w Web editor Values: Creative Integrity Responsible
2.
2
3. Implementation Phase Develop a multimedia project based on the storyboard using an authoring tool. Write the name of the authoring tool used. 4. Testing Phase Test the developed multimedia product. Complete the checklist. 5. Evaluation Phase Ask assessor to evaluate the developed multimedia product. a. Content match the project objective(s) b. Interface user friendly interactive c. Navigation all links/buttons functioning correctly d. Multimedia Elements text graphic audio video c. animation
6. Publishing Phase Submit a softcopy of the multimedia product. Write the storage medium used and name of the main file or folder. TOTAL MARK RF.CW.LA4.S08.1
16
REPORT FORM
LEARNING AREA Name of Candidate IC No Index No Construct Aspect Instrument : : : S08 LA4.S08.1 Multimedia Development Apply All The Phases Of Multimedia Production To Produce An Interactive Educational Multimedia Project. Project : MULTIMEDIA
1. ANALYSIS PHASE Project Title Objective(s) Target Audience 2. DESIGN PHASE (attach storyboard if space provided not enough)
3. IMPLEMENTATION PHASE Authoring tool 4. TESTING PHASE CHECKLIST FORM Items A B Content Match the project goal Interface User-friendly Interactive Navigation C All links/buttons functioning correctly YES NO
5. EVALUATION PHASE (to be carried out by the assessor using ACF.CW.LA4.S08.1) 6. PUBLISHING PHASE
-
Candidates Signature
------------------------------
TOC.CW.LA4.S09.1
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S09 LA4.S09.1 Current and Future Development of Multimedia Gather Examples of Immersive Multimedia In Education, Business or Entertainment Scrapbook
MARK
EVIDENCE
NOTE Candidate compiles articles, pictures, drawings from different types of sources such as newspapers, magazines, Internet, etc into a scrapbook based on any of the following: Immersive Multimedia in Education Immersive Multimedia in Business Immersive Multimedia in
2. Scrapbook contains at
least SIX pages excluding front and back covers. 3. Collections are relevant to the topic chosen. 4. State source and/or date in the scrapbook. Completed RF.CW.LA4.S09.1 AND Scrapbook
5. Submit RF.CW.LA4.S09.1
10
TOTAL MARK
RF.CW.LA4.S09.1
REPORT FORM
LEARNING AREA : MULTIMEDIA
Activity Log (record all activities carried out in compiling the scrapbook) Date Activity Remarks
TOC.CW.LA5.S10.1
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S10 LA5.S10.1 Program Development Apply Program Development Phases To Develop A Problem-Solving Program Practical Session
MARK
1.
CRITERIA
Problem Analysis a. Write the problem statement. List all the required input items c. Write the expected output. d. Write the formula to be used. 2. Program Design a. Write the pseudocode. OR Draw the flowchart. b. Sketch the user interface design for input. c. Sketch the user interface design for output. Coding Develop a program based on (1) and (2). Write the name of the project file. Testing and Debugging a. State the test data used for each input item listed in 1(b). b. Write the output based on 4(a) c. Compile the program. Write down the name of the executable file. Documentation Submit report and soft
EVIDENCE
NOTE
Duration of practical session: 2 periods Choose any of the suggested projects (refer to APPENDIX B) or propose a new project. Submit executable file and/or project file and form(s). During evaluation, assessor runs the candidates program to validate the output in 4(b) using the data in 4(a). Values: 1. Accurate 2. Confident 3. Responsible
3. 2
4.
Abide
4.
5.
20
TOTAL MARK
RF.CW.LA5.S10.1
REPORT FORM
LEARNING AREA
Name of Candidate IC No Index No Construct Aspect Instrument Assessment : : : : 1/2/3/_ S10 LA5.S10.1 Program Development Apply Program Development Phases To Develop A Problem-Solving Program Practical Session
PROGRAMMING
2. Program Design
a. Pseudocode
OR Flowchart
3. Coding (refer to program submitted) Project File Name: __________________ 4. Testing and Debugging a. State the data used for each input item listed in 1(b). c. Write the output based on the input data in 4(a) e. Name of the executable file Input item (s) Input data
Output item(s)
Actual Output
TOC.CW.LA5.S11.1
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S11 LA5.S11.1 Current And Future Development Of The Latest Programming Languages Find Out The Latest Programming Languages Report
MARK
CRITERIA 1. Identify and name the two latest programming languages 2. Identify and state a. the developer b. when it was developed c. purpose (why it was introduced)/applic ation d. platform e. approach (structured/objectoriented/etc) f. translator used 3. State the source of reference.
EVIDENCE
NOTE Report must be done individually. Suggested duration: 2 weeks Values: Cooperate Appreciate
Completed RF.CW.LA5.S11.1
12
16
TOTAL MARK
RF.CW.LA5.S11.1
REPORT FORM
LEARNING AREA : PROGRAMMING
Source of Reference
TOC.CW.LA6.S12 1
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S12 LA6.S12.1 Database Development Develop A Database Project Practical Session
MARK
CRITERIA
EVIDENCE
NOTE Duration of practical session: 2 periods Choose any of the suggested projects in APPENDIX C or propose a new project. Draw a line to show the relationship between both tables. Example:
TABLE 1 TABLE 2 Field name . 1:M or M:N or 1:1
Field name .
2 2
a c
5.
Create a query from two tables. 6. Create a report based on the query created. 7. Submit the report form and a soft copy of the developed database project.
TOTAL MARK
20
RF.CW.LA6.S12.1
REPORT FORM
LEARNING AREA
Name of Candidate IC No Index No Construct Aspect Instrument Assessment 1. Project title Objective(s) 2. Table name Field names Table 1 Table 2 : : : : 1/2/3/_ S12 LA6.S12.1 Database Development Develop A Database Project Practical Session
INFORMATION SYSTEM
3. 4.
Name of forms Number of records entered Criteria used for query Name of report Name of file Table ________________ Table ___________________
5. 6. 7.
Candidates Signature
-
-----------------------------TOC.CW.LA6.S13.1
TABLE OF CONSTRUCT
Construct Aspect Instrument : : : S13 LA6.S13.1 Current And Future Developments In Information Systems Find Out Current Developments In Computer Information Systems. Report
MARK
EVIDENCE
NOTE Report must be done individually. Suggested duration: 2 weeks Values: cooperate responsible
2. Give an example of web2 based application. State the function of the application. 3. Name a programming language used to develop web-based application. Completed RF.CW.LA6.S13.1
5. State an advantage of
2/0 web-based application compared to non webbased application.
6. State a vulnerability of
1 1 web-based application. 7. State source of reference.
10
TOTAL MARK
RF.CW.LA6.S13.1
REPORT FORM
LEARNING AREA
Name of Candidate IC No Index No Construct Aspect Instrument : : : S13 LA6.S13.1 Current And Future Developments In Information Systems Find Out Current Developments In Computer Information Systems. Report
INFORMATION SYSTEM
An example of a programming language used to develop webbased application. An example of a DBMS used in the web-based application. An advantage of webbased application (compared to non webbased application) A vulnerability of webbased application Source of Reference
Candidates Signature
------------------------------