This document outlines non-destructive testing requirements for different types of piping welds. It specifies that 100% of girth butt welds and fabricated branch welds must undergo visual and radiographic inspection, while 100% of attachment welds and fabricated welds of mitres/reducers require only visual inspection. Socket welds must be 100% visually inspected and 10% radiographed.
This document outlines non-destructive testing requirements for different types of piping welds. It specifies that 100% of girth butt welds and fabricated branch welds must undergo visual and radiographic inspection, while 100% of attachment welds and fabricated welds of mitres/reducers require only visual inspection. Socket welds must be 100% visually inspected and 10% radiographed.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
This document outlines non-destructive testing requirements for different types of piping welds. It specifies that 100% of girth butt welds and fabricated branch welds must undergo visual and radiographic inspection, while 100% of attachment welds and fabricated welds of mitres/reducers require only visual inspection. Socket welds must be 100% visually inspected and 10% radiographed.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
ASTM D6049 03 - Standard Test Method For Rubber Property - Measurement of The Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates PDF