Académique Documents
Professionnel Documents
Culture Documents
Pulling and Extracting Tools with Hydraulic Rams Pressure Range 5, 10, 20, 30 and 50 Tons
These sturdy hydraulic pullers will solve practically any conceivable pulling problem while considerably improving productivity in repair shops and industrial facilities. They facilitate heavy manual labor and minimize lost repair time and machine outages. By exerting a precisely defined hydraulic force, they enable careful, gentle application, frequently eliminating the need for time-consuming, expensive spare-parts procurement.
Performance data: Correspond with the maximum rated force and are adaptable to sundry conditions of use, safety requirements and operating instructions. 10 kN = 1 Mp = 1 t. Stated subject to change without notice in the interest of technical progress. Quoted weights are average weights and therefore non-binding.
HYD
Dimensions: Weights:
* Sliding plates are always arranged on the side opposite the ram.
Quickadjusting nut Crank Ram (pulling)
*
Ram (pushing)
*
Pushing force Pulling force Pulling force Pulling force
Pushing force
Pushing force
Type-Y38-180 pulling tool with type Y-315-5 separator and type-YHP-325 hand pump
10
Prior to applying any pulling force, wrap the pulling tool and the part to be pulled in a KUKKO protective blanket (see page 92).
84
The heads of these pullers can be used with three arms or two. Fitted with two arms, these pullers can be used together with separating devices (see top left illustration). Accordingly, they have an extremely versatile range of application for pulling gear wheels, pulleys, ball bearings, etc. The heads have female threads to accommodate the collar thread of the hydraulic ram.
Prior to applying any pulling force, wrap the pulling tool and the part to be pulled in a KUKKO protective blanket (see page 92).
Choice of separators
To match puller type: Y08-208 Y18-208 Separator type: 15-1, 15-2, 17-1, 17-2 15-3, 17-3, 15-4, 15-5
Art. no.
mm
10 20
"
mm
215 500
81/5 20
"
Ton.
kN
Ram stroke mm -
kg
4.5 45 10 100
125 5 250 10
4.7 18.8
461774 461699
YRE-050 YRE-101
kg
3.0 11.8
172366 172441
kg
Raripress Enerpac, OTC, Powerteam, NIKE Raripress Enerpac, OTC, Powerteam, NIKE
10
85
Type Y28-205 (20.5 kg) Two-arm puller with hydraulic ram, crank, and forcing screw Type Y20-205 (11 kg) Two-arm puller without hydraulic ram, crank, and forcing screw This puller can also be used with separator Type Y-215-3
Type Y28-206 (27.5 kg) Three-arm puller with hydraulic ram, crank, forcing screw and additional twin head
470 mm 181/2"
Type Y20-206 (16 kg) Three-arm puller without hydraulic ram, crank, without forcing screw, without additional twin head B
(See top photo, page 85.) 1"-8 B Spread max. (A) A Reach max. (B) Spread max. (A) A Reach max. (B)
420 mm 16"
300 mm 12"
500 mm 20"
300 mm 12"
30 tons max.
Type Y38-205 (39 kg) Two-arm puller with hydraulic ram, crank, and forcing screw Type Y30-205 (25 kg) Two-arm puller without hydraulic ram, crank, and forcing screw This puller can also be used with separator Type Y-315-5
Type Y38-206 (58 kg) Three-arm puller with hydraulic ram, crank, forcing screw and additional twin head
Type Y30-206 (40 kg) Three-arm puller without hydraulic ram, crank, without forcing screw, without additional twin head B
(See top photo, page 85.) Spread max. (A) Reach max. (B) Spread max. (A) A Reach max. (B)
700 mm 26"
520 mm 20"
900 mm 34"
520 mm 20"
50 tons max.
Type Y58-205 (88 kg) Two-arm puller with hydraulic ram, crank, and forcing screw Type Y50-205 (50 kg) Two-arm puller without hydraulic ram, crank, and forcing screw This puller can also be used with separators Type Y-515-6 and Y-515-7 (See top photo, page 85.) Spread max. (A) Reach max. (B)
Type Y58-206 (123 kg) Three-arm puller with hydraulic ram, crank, forcing screw and additional twin head
Type Y50-206 (80 kg) Three-arm puller without hydraulic ram, crank, without forcing screw, without additional twin head B Spread max. (A) A Reach max. (B)
1000 mm 36"
700 mm 275/8"
1200 mm 44"
700 mm 275/8"
10
87