Académique Documents
Professionnel Documents
Culture Documents
Addressing Table
Device (Hostname) S1 S2 S3 PC1 PC2 PC3 PC4 PC5 PC6 Interface VLAN 56 VLAN 56 VLAN 56 NIC NIC NIC NIC NIC NIC IP Address 192.168.56.11 192.168.56.12 192.168.56.13 192.168.10.21 192.168.20.22 192.168.30.23 192.168.10.24 192.168.20.25 192.168.30.26 Subnet Mask 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 Default Gateway N/A N/A N/A 192.168.10.1 192.168.20.1 192.168.30.1 192.168.10.1 192.168.20.1 192.168.30.1
All contents are Copyright 15622007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 3
Learning Objectives
Upon completion of this lab, you will be able to: Cable a network according to the topology diagram Erase the startup configuration and reload a switch to the default state Perform basic configuration tasks on a switch Create VLANs Assign switch ports to a VLAN Add, move, and change ports Verify VLAN configuration Enable trunking on inter-switch connections Verify trunk configuration Save the VLAN configuration
All contents are Copyright 15622007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 3
Task 6: Clean Up
Erase the configurations and reload the switches. Disconnect and store the cabling. For PC hosts that are normally connected to other networks (such as the school LAN or to the Internet), reconnect the appropriate cabling and restore the TCP/IP settings.
All contents are Copyright 15622007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 3