Vous êtes sur la page 1sur 86

Soltron Operating Instructions

801149 / Index „a“ / us / 01.2004

XL-70 Turbo Plus

03713 / 0
Identify your tanning device
For contact with customer service, please write down the device number of your tanning device.

II

03479 / 0
Global Service Division
#1 Walter Kratz Drive
Jonesboro, Arkansas 72401

( (800) 445 0624

I
Note:
Description of
skin types see
Page 14.

04168 / 0
“This product is in conformity with performance standards for sunlamp products under CFR21 Part 1040.”

II
Foreword

Dear Customer,
The Soltron device you have purchased is a technically advanced and • Read and observe the information in this instruction manual. This will
powerful microcomputer control system. Your device was manufactured enable you to prevent accidents and provide you with a reliable
with the greatest care and precision. It went through numerous quality device ready for use.
and safety checks in order to guarantee trouble-free, safe operation. But • Always observe the local and federal regulations and legal
you too may make a significant contribution to your long-term satisfaction requirements as well as the valid environmental protection
with your device. Following the tips and instructions in the instruction
Foreword

regulations.
manual will ensure you enjoyment and pleasure with your device.
In case of any questions, we are always at your disposition1).
Your sincerely
Soltron Inc.

1) (1-866-243-9861

1
Table Of Contents

Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Regulating face tanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22


Danger of damage to persons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Switching shoulder tanner off and on . . . . . . . . . . . . . . . . . . . . . . . . . 23
Meaning of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Regulating air condition1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Regulating body cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Regulating facial cooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Table Of Contents
Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Switching AROMA1) DREAM or ENERGY on and off . . . . . . . . . . . . 27
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Switching VITALIZER1) body nozzle on and off . . . . . . . . . . . . . . . . . 28
Product information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Switching VITALIZER1) head nozzle on and off . . . . . . . . . . . . . . . . . 29
Maintenance and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Selecting music channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Adjusting volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Environmental protection information . . . . . . . . . . . . . . . . . . . . . . . . 13
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
General tanning instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Skin types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . Fold-out page, 34
Maintenance, overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Maintenance intervals, installed lamps and order numbers . . . . . . . . 35
Operating table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fold-out page, 16
Cleaning/replacing UV low-pressure lamps in sunbed base . . . . . . . 41
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cleaning/replacing UV low-pressure lamps in
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 shoulder tanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Settings during start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Cleaning/replacing UV low-pressure lamps in side section . . . . . . . . 45
Terminate tanning session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Cleaning/replacing UV low-pressure lamps in canopy . . . . . . . . . . . 46
Running time of accent lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Cleaning/replacing interior lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
IR function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1) optional

2
Table Of Contents

Cleaning/replacing UV high-pressure lamps/filter Timer operation . . . . . . . . . . . . . . . . . . . see separate manual


panels in side section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Cleaning/replacing UV high-pressure lamps/filter
panels in canopy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Cleaning/replacing accent lights in canopy . . . . . . . . . . . . . . . . . . . . . 56
Table Of Contents

Cleaning/replacing accent lights in frontpanel . . . . . . . . . . . . . . . . . . 57


Cleaning filters in sunbed base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Cleaning/replacing filter mats in canopy . . . . . . . . . . . . . . . . . . . . . . . 60
Cleaning/replacing filter mats in shoulder tanner . . . . . . . . . . . . . . . . 61
Air Condition: cleaning/replacing filter mat,
emptying condensate container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
AROMA system: replacing aroma container . . . . . . . . . . . . . . . . . . . . 65
VITALIZER system: replacing canister . . . . . . . . . . . . . . . . . . . . . . . . 67

Presettings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Changing presettings with the control panel . . . . . . . . . . . . . . . . . . . 70
Changing presettings with a hand-held unit . . . . . . . . . . . . . . . . . . . 72

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Note:
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 Technical changes are reserved with respect to the illustra-
tions and specifications in this instruction manual.
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Reprinting and reproduction, in whole or in part, of this man-
ual is only permitted with our previous written approval and
with specification of the source.

3
Safety

Safety
Description of warning signs Caution notes, property damage:
CAUTION!
Danger notes, damage to persons:
The word “CAUTION” with this label points out that danger for
Type and source of danger, e.g. “DANGER – High devices, materials and the environment can be expected
voltage!” here.

Safety
DANGER! Description of the consequences, e.g. “You can be Important information:
killed or injured by an electric shock!” Note:
Countermeasures: This symbol does not identify safety notes, but states infor-
– Disconnect device from power supply before open- mation for a better understanding of the processes.
ing.
– Do not reach into the inside or change lamps with the
device switched on.

Warning notes, damage to persons:

Type and source of danger, e.g. “Warning – hot


surface!”

WARNING! Description of the consequences, e.g. “You can burn


your hand (skin, face)!”
Countermeasures:
– Do not touch the lamps and nearby surfaces.
– Wait until lamps and surfaces have cooled down.

4
Intended use

Intended use Danger of damage to persons


The tanning device is intended exclusively for cosmetic tanning of the hu-
man skin: DANGER – High voltage!
• This device is used for tanning one adult person at a time.
• The user wears suitable eye protection that blocks UV radiation DANGER! You can be killed or injured by an electric shock!
Intended use

during tanning. Assembly and electrical connection must comply with


Any other use shall be considered improper. The manufacturer cannot be the national and local regulations.
held liable for damage or injuries resulting from improper use. The – Assembly, installation, upgrading or repair of the de-
operator bears the sole risk for this. vice may only be carried out by specially trained and
The proper use also includes compliance with the manufacturer’s instruc- instructed personnel.
tions, operating, maintenance and regulation conditions. The device may
only be operated, maintained and repaired by persons familiar with these
tasks and that have been informed of the dangers involved. Warning – ultraviolet radiation!
Important notes for the studio operator
• As the operator you are responsible for informing users on possible
WARNING! Unprotected tanning may result in eye injuries and eye
diseases.
risks during tanning.
The unprotected eye can become inflamed on the sur-
• All danger and safety labels attached to the device must be observed! face, and in certain cases the retina can be damaged
Do not remove them! by excessive radiation. Cataracts can form after fre-
• No safety equipment (e.g. panel switch) may be removed or deacti- quently repeated exposure to radiation.
vated which can impair the safe operation of the device! – Inform users to close their eyes during tanning and
• The device may only be operated in proper condition! use the included protective goggles that block UV
(Order No. 845921)).

1) Global Service Division – see page I.

5
Danger of damage to persons

Warning – ultraviolet radiation! Warning – ultraviolet radiation!

WARNING! As with natural sunlight, overexposure can cause eye WARNING! Danger of long-term consequences.
and skin injury and allergic reactions. Repeated expo-
– Nursing infants and small children through age

Danger of damage to
sure may cause premature aging of the skin and skin
7 years may not use this device.
cancer. Wear protective eye wear; failure to may result
– The following applies to minors under the age of

persons
in severe burns or long-term injury to eyes.
18 years: Only use tanning devices in agreement with
Occasionally, persons using the tanning device will experience a slight a parent or guardian, or after consulting a physician.
reddening of the skin – usually in small patches – after the second or third
– While there is no immediate clinical evidence of UVA
session. This redness is often accompanied by an itching sensation. This
exposure and its effects upon expectant mothers, it is
may be nothing more than a heat “rash” caused by heat from the lamps
strongly advised that expectant mothers be discour-
within the device. It is generally very limited and caused by constant con-
aged from using the tanning unit..
tact of the skin with the acrylic surface. It should go away within approx-
imately 24 hours and should not reappear. This rashing can be lessened
or prevented by applying moisturizer lotion to the affected area after the
tanning session is completed.
– Follow instructions.
– The time between two tanning sessions must be at least 24 hours!
– Increasing tanning also requires an extension of the exposure time (=
radiation time) or after a certain degree of tanning has been achieved,
a further intensification is not possible. However, the radiation time may
not be extended as desired within the scope of the permissible radia-
tion doses! Therefore, only a certain degree of final tanning dependent
on the skin type can be achieved without endangering your health.
– Inform users about proper tanning – see page 13.

6
Please read and observe ...

Meaning of symbols
Symbols for Description, Operation and Maintenance

General Symbols General Symbols


Meaning of symbols

Inform Customer Service Filter panels

Soltron key Cleaning and disinfectant agents

Do not touch, hot surface! Part/article number (for orders)

Low-pressure lamp(s) Operation

UV low-pressure lamp(s) Display of tanning time

Starter for low-pressure lamp(s) Display of run-on time (fan run-on)

Fault display (example),


UV high-pressure lamp(s)
see separate manual

7
Please read and observe ...

Display of Music Channel 1 (Channel 1)


Factory setting: 1 channel Loudspeaker
Customer service can set up to 7 channels

Display when adjusting volume Headphone connection

Meaning of symbols
Description Technical data

Effect lighting Maintenance

Body cooling by
Caution, safety switch!
AQUA SOLAR WITH SKIN+ ADDITIVE

Aroma “Dream”, “Energy”, “Cabin” Unscrew/release screw

Press button Tighten/lock screw

e.g.
Press button for 2 seconds Suction cup
2s

0-3 min Duration: 3 minutes Cleaning

8
Please read and observe ...

Replacing Presettings

Clean or replace depending on soiling Display


Meaning of symbols

Draining Troubleshooting

Visual inspection

Air Condition

Filter/filter mat

Continuation of work steps


... on next page

End of work step

9
Please read and observe ...

Guidelines Equipment
This device was built according to UL STD 482, certified to CAN/CSA The equipment of the devices differs depending on the model.
STD C22.2 2 No. 224. In this instruction manual all standard and optional components/functions
CAUTION – Air inflow and outflow are taken into account which must be observed during operation and/or
when performing maintenance.
Do not change, obstruct or block the air inflow and outflow
The control panel is also affected by the differing equipment: Only those

Guidelines
area to the device or make any unauthorized changes to the
device. The manufacturer shall bear no liability for damage or buttons are visible that can be operated, i.e. the corresponding function
injuries resulting from such actions. must be part of the equipment of the device.

Export Accessories
We would like to point out that the devices are exclusively intended for Some accessory parts are taken into account in the maintenance sched-
use in the US and Canada, and may not be exported to other countries ule beginning on Page 36, however this does not automatically mean that
and operated there! The manufacturer shall assume no liability whatso- your device is provided with this equipment (e.g. Air Condition).
ever in case of non-observance! We explicitly emphasize that high liabil- An overview of the possible accessories is provided in the sales docu-
ity risks may occur for the exporter an/or the operator in case of non- mentation.
observance.

10
Please read and observe ...

Product information Maintenance and care


Acrylic glass panels
Extreme danger! High voltage!
The acrylic glass panels for the tanning devices are produced of acrylic
glass developed especially for this application. The acrylics used are char-
DANGER!
Product information

acterized by a particularly high UV permeability and resistance, as well as During maintenance work there is a danger of touching
an easy-care, hygienic surface that is gentle to the skin. live parts and receiving a fatal electrical shock.
The acrylic glass panels are formed to their shapes for the specific devic- • Disconnect device from power supply before
es in a technically complex production process. Despite state-of-the-art opening – also see Page 34.
production know-how, the presence of minor spots, air bubbles or • Do not reach behind covers, do not open the device
streaks in the acrylic panels is unavoidable. In addition, microfine hairline and do not replace lamps with the device switched
cracks can occur on the bed surface during operation. on.
These occurrences are material-dependent and are unavoidable in pro- Maintenance and care play a major role in deciding whether the device
cessing, however have no significant effect on the utility value and can meets the requirements placed on it in a satisfactory manner. The com-
therefore not be recognized as defects. pliance with the specified maintenance intervals and the careful conduct-
CAUTION! ing of the maintenance and care work are therefore absolutely necessary
Cosmetics or sun screen products must be removed prior to – see Page 36 ff.
tanning as they can cause damage (e.g. fine cracks on the The current operating hours of the parts requiring maintenance can be
surface) when used continuously. displayed in the Presetting mode – see Page 70 ff.
Remount any protective devices (e.g. filter panels) after completing work.
CAUTION!
Only use original spare parts of the same type or compatible
parts! The use of other parts voids the conformity! Any liability
is excluded in case of damage or injury proven to be the re-
sult of the use of non-original spare parts.

11
Please read and observe ...

Cleaning
Acrylic glass surfaces
CAUTION!
Do not rub with a dry cloth – danger of scratching!
For fast, hygienic proper cleaning of acrylic glass surfaces,
use the specially developed fast disinfectant cleaner Anti-

Cleaning
fect®.
Concentrated disinfectants or solvents (e.g. Lysoform, ethyl
alcohol or other liquids containing alcohol) may never be
used for cleaning. Other unsuitable cleaning agents that
cause damage due to chemical reactions may also not
be used!

Plastic surfaces
For cleaning the other plastic surfaces, it is best to use warm water and
a leather cloth. Never use aggressive cleaning agents containing alcohol,
e.g. the commercially available Sagrotan, or essential oils. These may 02756 / 0
lead, in the long run, to damages not covered by the guarantee.
During cleaning a slight discoloration of the leather cloth by the rubber
seals must be expected for production-related reasons.
Note:
Prevent damage to the acrylic glass and plastic surfaces. Re-
move rings, watches, bracelets etc. before the start of clean-
ing work.

12
Please read and observe ...

Environmental protection information General tanning instructions


Environmental Declaration – The JK Corporate Group Who can get a tan?
The JK corporate group is subject to the strict regulations of EC Directive Anyone who also gets a tan in natural sunlight. Persons with sensitive
Environmental protection

761/2001 and the standard DIN ISO 14001, and undergoes regular inter- skin even tan more pleasantly and with fewer worries, as the radiation
nal and external environment audits performed by trained auditors. dosage can be exactly defined with sunbeds.
Certain drugs – particularly those that produce photosensitivity – may
information

Environmental regulations – disposal of lamps cause individuals under the influence of this type drug to experience ad-
UV low-pressure lamps and UV high-pressure lamps contain fluorescent verse effects and those people should avoid exposure to UV sources of
materials and other waste containing mercury. all kinds. Doctors will advice people taking these drugs to possible ad-
According to the national waste disposal laws and in accordance with the verse effects.
municipal waste regulations, proof must be provided of the proper dis- The speed and intensity with which someone tans are dependent on the
posal of UV lamps. skin type and the individual melanin quantity in the skin. No two individual
Your local environmental agency will be happy to assist you with the dis- skin tones are the same. A tan to one person may be different to another
posal of UV lamps. and treatment length may vary.
What is Melanin?
The brownish pigment produced by special cells in the base layer of your
skin determines the individual's tan. As the skin is exposed to the ultravi-
olet light, the melanin is activated and combines with protein cells that
rise to the skin's surface, thus producing a tan. The amount of melanin in
your body determines how quickly and dark you tan. The more melanin
produced and exposure time an individual has, the faster and deeper the
individual will tan.

13
Please read and observe ...

Note: our sunbeds only contains extremely small quantities of comparable


The tan produced by the tanning unit is a deep, rich “Cosmet- rays, making this kind of protection unnecessary. On the contrary, the
ic” tan. However, regardless of how dark an individual may skin should be thoroughly cleaned and dried before each sunbath. Many
tan on his system, it will not provide adequate protection facial makeups have oil bases and should be removed prior to a session.
against overexposure to natural sunlight or UVB tanning sys- Adequate ventilation of the room or booth housing the tanning device is
tems. required for proper and comfortable operation. Your tanning device will

General tanning
perform best at the ambient temperature of 75 °F to 90 °F.

instructions
Which tanning times are recommended?
It is recommended that, following a tanning session, a skin moisturizer be
Although there is virtually no reason to worry about sunburn with the UV
applied. This promotes a smoother, more even looking tan.
tanning method, some consideration should initially be given to individual
skin sensitivity.
Skin types
Danger of skin injuries and skin diseases! For the recommended exposure schedule (see page II):
Skin type II:
DANGER! Although UVA radiation is relatively harmless compared This is the individual that usually burns easily and severely, tans minimal-
to natural sunlight, excessive tanning times can lead to ly or lightly and peels.
the skin becoming red and to burns.
Skin type III:
– Comply with the recommended tanning times,
see Page I. Often referred to as “Average” complexion, burns moderately and tans
about average.
Once you have a tan, 1 to 2 tanning sessions per week are usually suffi-
cient to maintain it. Skin type IV:
This individual burns minimally, tans easily and above average with each
Should you use sun screen? exposure.
No! It is recommended to not use sun screens, oils or lotions intended for
outdoor use. Cosmetic sun screens with a sun protection factor (SPF) Skin type V:
are intended to filter out the sun's aggressive rays. However, the light of This individual’s system rarely burns, tans easily and substantially.

14
Please read and observe ...
General tanning
instructions

15
Accessories

Operation
03902 / 0

18
Tanning
Start and end of tanning If the device fails to start up when you have closed the canopy:
The device is started automatically with an internal or external timer and – Press START/STOP to start tanning.
automatically stopped after the preselected time. The fan continues to
run for approx. 3 minutes (fan delay) to sufficiently cool the device.
Note:
Timer instructions: see separate manual.
Operation

Preparation time
Before the UV lamps automatically go on, you have a few minutes to pre-
pare yourself. During the preparation time you can switch on the UV
lamps at any time by pressing the START/STOP button.
– Remove your clothes and all jewelry.
– Remove make-up and other cosmetics.
– Remove glasses. Contact lenses can be worn under the protective
goggles.
– Put on the protective goggles.
– Lie down on the bed surface.
– Close the canopy.
04169 / 0
Depending on the controller, the tanning device starts up after a short
time automatically. The tanning device is operating when the UV lamps
are on and the fans are running.

19
Settings during start-up To interrupt tanning session

Operation
03904 / 0 04169 / 0
The tanning time can be interrupted during tanning by switching off the
UV lamps:
– Press START/STOP for three (3) seconds to pause or stop tanning.
– Press START/STOP again for three (3) seconds to restart the lamps.

20
Running time of accent lights IR function 72

The accent lights are automatically switched


on at the end of the tanning time after the set
operating time and are switched off again at the
beginning of the next tanning session.
The running time of the accent lights in the
Operation

Standby mode can be changed with the preset-


tings – see from Page 70 on.

IR Function
03907 / 0 04010 / 0

70

03908 / 0

21
Face tanner
1 2 Press for two (2) seconds.

1 3

Operation
03909 / 0 03910 / 0 03911 / 0

1 2 One (1) minute delay.

2 4
Switching the face tanner OFF:
– Press button for two (2) seconds.
Switching on face tanner again:

– Press button again. It takes approx. one


(1) minute until the face tanners reach their
full output. + 1 min

03909 / 0 03909 / 0

22
Shoulder tanner Press for
1 2 two (2)
seconds.
1
Operation

03914 / 0 03915 / 0

1 2

Switching the shoulder tanner OFF: 2


– Press button .
– While the button flashes, press the minus
button for two (2) seconds to switch the
shoulder tanner off.
Switching the shoulder tanner on again:
– Press button .
– While the button flashes, press the plus
button to switch the shoulder tanner on. 03914 / 0

23
Air condition Press for
1 2 two (2) 1 2
seconds.
1

Operation
03912 / 0 03913 / 0 03912 / 0

During start-up the air condition is active.


Three (3) minutes delay.
Switching the air condition OFF:
– Press button . 2
– While the button flashes, press the minus
button for two (2) seconds to switch the air
condition off.
Switching on air condition again:
– Press button again. While the button
flashes, press the plus button. It takes
approx. 3 minutes until the cooling effect of
the air condition is reestablished.
03913 / 0

24
Surround cooling body ventilator –
1 2
Adjust speed
1
Operation

03916 / 0 03916 / 0

1 2

2
– Press button .
– While the button flashes, press the plus or
minus button to change the intensity of the air
stream.

03917 / 0

25
Surround cooling head nozzles –
1 2
Adjust speed
1

Operation
03918 / 0 03918 / 0

1 2

2
– Press button .
– While the button flashes, press the plus or
minus button to change the intensity of the air
stream.

03919 / 0

26
AROMA DREAM or ENERGY Press for
1 2 1 2 two (2)
(example: DREAM) seconds.
1 2
Operation

03920 / 0 04012 / 0 03920 / 0

The AROMA VITALIZER system includes Activate the AROMA system: Deactivate the AROMA system:
aromas with the scents “Dream” and “Energy”,
– Press button (or ). – Press button (or ).
which are distributed via the head nozzles.
A third aroma “Cabin” is distributed in the cabin
(no operation possible). – While the button (DREAM or ENERGY) – While the button (DREAM or ENERGY)
flashes, press the plus button to activate the flashes, press the minus button for two (2)
AROMA system. seconds to deactivate the AROMA system.

27
VITALIZER body nozzle
1 2

Operation
03920 / 0 03924 / 0
Press for
The VITALIZER function sprays a fine mist of two (2)
1 2
AQUA SOLAR WITH SKIN+ ADDITIVE in the seconds.
interior of the sunbed for body cooling. 2
Activating the Vitalizer body function:
– Press button .
– While the button flashes, press the plus button
to activate the VITALIZER body function.
Deactivating the Vitalizer body function:
– Press button .
– While the button flashes, press the minus
button for two (2) seconds to deactivate the
VITALIZER body function. 03920 / 0

28
VITALIZER head nozzle
1 2

1
Operation

03920 / 0 03927 / 0
Press for
The VITALIZER function sprays a fine mist of two (2)
1 2
AQUA SOLAR WITH SKIN+ ADDITIVE in the seconds.
interior of the sunbed for face cooling.
2
Activating the Vitalizer head function:
– Press button .
– While the button flashes, press the plus button
to activate the VITALIZER head function.
Deactivating the Vitalizer head function:
– Press button .
While the button flashes, press the plus button
for two (2) seconds to deactivate the
VITALIZER head function. 03920 / 0

29
Channel
1 2
Press to activate.
1 3

Operation
03905 / 0 03905 / 0 03905 / 0

1 2 1 2

2 4
– Press button .
– While the button flashes, press the plus or
minus button to select a channel.
means: no Channel selected, there is
no sound, music is “OFF”.

03905 / 0 03905 / 0

30
Volume
1 2
Press to activate.
1 3
Operation

70

03905 / 0 03905 / 0 03905 / 0

1 2

2
– Press button .
– While the button flashes, press the plus or
minus button to change the volume.

03905 / 0

31
Technical data

Soltron XL-70
Model:
Turbo Plus
Powerinput 3-pole Powerinput 1-pole
13,900W (max. 50 amp) (max. 90 amp)
230V AC 60 Hz 230V AC 60 Hz
Rated power consumption:
15,000W
Rated voltage: 230 V
Rated frequency: 60 Hz
60 amp 3-pole
Rated fusing:

Technical data
80 amp 2-pole

Conformity mark:

04045 / 1

32
Bed tolerance in room Maximum permissible load
A = 68.50 in
B = 53.54 in
C = 56.30 in
D = 80.31 in

A
300
E = 92.13 in
B
lb
Technical data

F = 35.43 in

C
03931 / 0 04170 / 0
Warning – possible
breakage of the acrylic
Maximum room temperature / Humidity
panel!
WARNING! Severe cuts from glass and
burns from hot lamps may
result.
– Only one adult person is
allowed at the same time.
– People with more than
D
F 300 lbs must not use the
device at all.
E

04208 / 0 03173 / 1

33
Scheduled maintenance – filters, AROMA, VITALIZER

51 937 58
/50 h 5 4x

a 2x 800 601 60

f 1x 51 975 63

2 2x 800 278 61

Maintenance
80 - 300 h 6 1x 1.6 gal 365 1803 67

300 h 7 a) 100 ml a) Dream:


b) Energy:
365 1703
365 1603
65
b)
c) c) Cabin: 365 1503

36
Scheduled maintenance – accent lights

a) 1x white 13 W ▲ 12408 56

a b) 1x white 30 W ▲ 12490 57

c c) 1x blue 30 W ▲ 12377 57

b a) b) 3x ▲ 10047
03934 / 0
c) S10
Maintenance

37
Scheduled maintenance – UV lamps, starters

XL-70 Turbo Plus

500 h a) b) 37
b) 4x Soltron 500 W ▲ 12541 50, 53
h
d
f) 19 x Soltron VHP 10 160 W Turbo Power ▲ 12500 41
e
g
g) 8x Soltron VHP 10 160 W Turbo Power ▲ 12500 45

f
h) 24 x Soltron VHP 10 160 W Turbo Power ▲ 12500 46
03642 / 0

Maintenance
e) 7x Soltron VHP 25 W power ▲ 12597 43

1000 h f) g) h) 51 x S12 ▲ 10012

e) 7x S10 ▲ 10047

The UV high-pressure lamps used, Soltron 500 W (face


tanner), are broadband radiators that can be operated with
different wattages (approx. 240-520 W).
UV low-pressure lamps: Clean with plain water (damp cloth).

38
3,000 h 5 700 711 41

4 800 665 41
Maintenance

1 (Soltron 2) 702 609 50, 53

Filter panels: Clean with plain water (damp cloth).

39
Relamping / maintencance instructions
It is imperative that you, the owner and/or operator, check all compon-
ents for any signs of wear which may occur through normal use. Danger of burns from hot lamps and device parts
– Observe the cleaning and maintenance schedule specified in the
maintenance table on Page 35 to 39.
WARNING! If the tanning device was operated before being swit-
– Only replace UV low-pressure lamps with the original lamp type or with ched off and opened, lamps and housing parts may be
compatible lamps. hot.
– Only replace UV high-pressure lamps with the original lamp type or with – Before replacing lamps or other spare parts, wait until
compatible lamps. lamps and metal parts of the device have cooled
Should you require any assistance or need additional information, please down sufficiently.
call Global Service Division at 1-800-643-0086, Monday through Friday

Maintenance
8:00 a.m. - 17:00 p.m. CST
Danger of pinching!
CAUTION – Damage due to improper maintenance!
Improper maintenance can cause the device to be damaged When opening and closing the tray, panels and covers,
or to become unusable. you can pinch your fingers.
– Always comply with the specified maintenance intervals.
– Follow the cleaning instructions.
– If the maintenance intervals for the UV lamps are exceeded or incom-
patible UV lamps are installed, the share of harmful UVB radiation may
increase. Sunburn and other skin damage may result.

40
UV low-pressure lamps, lower section

2 4

2
2
Maintenance

03939 / 0 03941 / 0 03943 / 0

De-energize device!
1 3 5
2 3

1
2 1
1

03940 / 0 03942 / 0 03098 / 0 ...

41
6

Maintenance
03099 / 0

Close:
7

2
1
3

03944 / 0

42
UV low-pressure lamps, shoulder tanner

2 4

2
2
Maintenance

03945 / 0 03941 / 0 03947 / 0

De-energize device!
1 3 5
2

03940 / 0 03946 / 0 03653 / 0 ...

43
Close:
6 8
1 2

2
1
3

Maintenance
03108 / 0 03944 / 0

03099 / 0

44
UV low-pressure lamps, side section

2 4
Maintenance

03948 / 0 03950 / 0 03099 / 0

De-energize device! Close:


1 3 5
1 2

2 1

1 2

03949 / 0 03108 / 0 03957 / 0

45
UV low-pressure lamps, canopy

De-energize device!
1 3
1 2
2
3 1

1 2 3

Maintenance
03951 / 0 03952 / 0 03108 / 0

Danger of injury from the 2


canopy panel!

WARNING! The canopy panel is heavy and


falls down by itself after uns-
crewing the 3 screws.
– Support canopy panel.
– Loosen screws in the specified
order.

03953 / 0 ...

46
4
Maintenance

03099 / 0

Close:
5

3
1 2

1 2 3
03954 / 0

47
Interior lighting, canopy

De-energize device!
1 3
1 2
2
3 1 1 2

1 2

1 2 3

Maintenance
03955 / 0 03952 / 0 03347 / 0

Danger of injury from the


2 4
canopy panel!

WARNING! The canopy panel is heavy and


1 2
falls down by itself after uns-
crewing the 3 screws.
– Support canopy panel.
– Loosen screws in the specified
order.

03953 / 0 03299 / 0 ...

48
5
Maintenance

03099 / 0

Close:
6

3
1 2

1 2 3
03954 / 0

49
UV high-pressure lamps, side section

2 4
3
1 2

Maintenance
03956 / 0 03950 / 0 04287 / 0

De-energize device!
1 3 5

03949 / 0 04286 / 0 03896 / 0 ...

50
– Check safety switch:

6 CAUTION! 9
Do not touch the glass bulbs of the
UV high-pressure lamps with your
bare fingers! Remove soiling thor-
oughly.
– Only touch new UV high-pressure lamp with
a cloth – see Figure 8.

1 2
Maintenance

02757 / 0 03899 / 0

7 8 10

03897 / 0 03898 / 0 03699 / 0 ...

51
Close:
11 13

1 1
2 3
2

Maintenance
04288 / 0 03957 / 0

12

03901 / 0

52
UV high-pressure lamps, canopy

De-energize device!
1 3

2
3 1

1 2 3
Maintenance

03958 / 0 03952 / 0 04286 / 0

Danger of injury from the 2 4


canopy panel!
3
WARNING! The canopy panel is heavy and 1 2
falls down by itself after uns-
crewing the 3 screws.
– Support canopy panel.
– Loosen screws in the specified
order.

03953 / 0 04287 / 0 ...

53
5 7 8

Maintenance
03896 / 0 03897 / 0 03898 / 0

– Check safety switch:

6 CAUTION! 9
Do not touch the glass bulbs of the
UV high-pressure lamps with your
bare fingers! Remove soiling thor-
oughly.
– Only touch new UV high-pressure lamp with
a cloth – see Figure 8.

1 2
02757 / 0 03899 / 0 ...

54
10 12
Maintenance

03699 / 0 03901 / 0

Close:
11 13

3
1 1 2
2 3

1 2 3
04288 / 0 03954 / 0

55
Accent lights, canopy

2 4

Maintenance
03959 / 0 03961 / 0 03099 / 0

De-energize device!
1 3 5
1 2

1 2

2 1

03960 / 0 03350 / 0 03962 / 0

56
Accent lights, front panel

2
Maintenance

03963 / 0 03965 / 0

De-energize device!
1 3

03964 / 0 03099 / 0

57
Lower section, filter

Hand-wipe lightly, dry or with water,


or use a vacuum cleaner.

2 4

Maintenance
1
03967 / 0 03968 / 0 03319 / 0

De-energize device!
1 3 5

1 2 1 2
2 2
03940 / 0 03969 / 1 03970 / 1 ...

58
6
Maintenance

03971 / 0

Close:
7

2
1
3

03944 / 0

59
Canopy, filter mats

Rinse with water or


replace.

Maintenance
03972 / 0 04047 / 0

1 3
2

03973 / 0 04060 / 0

60
Shoulder tanner, filter mats

2 4

2
2
Maintenance

03945 / 0 03941 / 0 03947 / 0

De-energize device!
1 3 5
2

03940 / 0 03946 / 0 03653 / 0 ...

61
6 8

Maintenance
03680 / 0 04061 / 0
Rinse with water or
replace. Close:
7 9

2
1
3

04047 / 0 03944 / 0

62
Air Condition, condensate and filter mats

Clean carefully (vacuum


or wash) or replace.

2 4
2
2

1
Maintenance

1
03974 / 0 03968 / 0 03244 / 0

De-energize device!
1 3
2 3

03940 / 0 04043 / 0 ...

63
5

Maintenance
03971 / 0

Close:
6

2
1
3

03944 / 0

64
Lower section, AROMA

2 4

2
Maintenance

1 03354 / 0
03975 / 0 03968 / 0

De-energize device! – Match colors of labels.


1 3 5

1 2
2
2
1

1
03940 / 0 03246 / 0 03355 / 0 ...

65
6

Maintenance
03971 / 0

Close:
7

2
1
3

03944 / 0

66
Lower section, VITALIZER

2 3
3 5
2
VITALIZ
ER

VITALIZ
ER VITALIZ
ER

4 6
Maintenance

1
03976 / 0 03968 / 0 04005 / 0

De-energize device! Health hazard!


1 4
WARNING! Impurities in the VITALIZER can
present a health hazard. 8
7
– Use only original Soltron
VITALIZER!
– Replace the entire canister.
VITALIZ
ER
– Do not top up or mix with tap
water or other liquids!
– Do not swallow!
03940 / 0 04006 / 0 ...

67
VITALIZER, Venting after canister replacing

5 8
Note:
For venting after canister replace-
ment you must enter presetting
mode and choose function 18
(see Page 70).

Maintenance
03971 / 0 04033 / 1

Close:
6 7
1
70

2
1 2
3

03944 / 0 04036 / 1 ...

68
9
Maintenance

04038 / 0

10

30 sec
04040 / 0

69
Changing presettings with the control panel
The setting mode enables you to call up operating states and make alte- Changing presettings
rations to current settings.
Increase the preset value:
Changing to Presetting mode • Press and hold the START/STOP button while simultaneously pres-
sing the + button.
• Press the buttons - and + simultaneously for at least five seconds out-
Decrease the preset value:
side a tanning process.
• Press and hold the START/STOP button while simultaneously pres-
• appears in the display.
sing the – button.
• Enter the code (see Page 71).
Reset to the last value set:
• Press the START/STOP button four times when you run the Preset-
• Press the START/STOP button.
ting mode for the first time.
Reset to the delivered state:
• briefly appears in the display, then (Function 1)
and the presetting value are displayed alternately (see column “On • See function .

Presettings
delivery”). Note:
• By pressing the + button you scroll up to the next function (from -01- The sunbed will automatically return to 'idle' mode 30 se-
to -20-). conds after the last button was pressed.
• By pressing the – button you scroll down to the next function (from
-20- to -01-).
The presettings are listed beginning on Page 73.

70
Defining a code
• Select Function .
• Press the START/STOP button for 3 seconds until appears.
• Press the desired buttons consecutively:
• Press the buttons in the same sequence when appears
again.
• appears in the display. The set code has been saved.
• Please note the code for Customer Service.
If you know the old code, you can define a new code at any time.
Presettings

71
Changing presettings with a hand-held unit
Some data can also be displayed and changed with a commercially Information on operating the hand-held unit is contained in the manufac-
available hand-held unit (e.g. from Palm). For this purpose you require turer's documentation.
special software (available in German and English). Please call 1-866-
243-9861 for more details.
Caution!
The code for access via the infrared interface is preset in
the software of the hand-held unit, and can therefore be
used with any unit. Anyone, who downloads the software
from the Internet can access the unit date with a hand-held
unit. Please note that Customer Service changes the preset
access code during initial start-up – see software operating
manual. Please note the new code for future use! IR Function
This code is independent of the access code for the preset- 04002 / 0
tings via the control panel.

Presettings
Note:
Please read the operating manual for the Soltron software
for instructions on how to display or change data with a
hand-held unit.

72
No. Description on delivery Values from-to

Total number of operating hours 0 → 9999

Remaining operating time of UV low-pressure lamps (hours) 500 → 0000

Remaining operating time of UV high-pressure lamps (hours) 500 → 0

Remaining operating time of shoulder tanner (hours) 500 → 0

Remaining operating time of filter mats (hours) 50 → 0


Presettings

Air conditioning operating hours 0 → 9999

Decorative lighting operating hours (minutes)


When the maximum value is exceeded: 1 → 1440
Display = continuous operation

Fan run-on time (minutes) 3 → 10

1 → 23
To set the time
01 → 59

73
No. Description on delivery Values from-to

To reset the device to ex-works setting (all functions)

To set the access authorisation code to enter setting mode (see Page 71)

Adjust volume for music output (Sound System) 7 → 63

Ambient temperature setpoint value (°C) 15 → 30

Recycle air during fan run-on time (+ = on / – = OFF)

VITALIZER running time (operating hours until canister replacement)/

Presettings
1.00 → 10.00
Venting after canister replacement

Lower temperature limit of air conditioner 15°C → 25°C

VITALIZER: Misting intensity (head and body nozzle) -5 → 5

74
Troubleshooting
In the case of a fault, fault codes appear on the display to simplify
localizing of the fault cause (see separate manual):
• If a fault occurs, the fault code flashes in the display.
• If several faults occur, the fault messages are displayed alternately.
• The fault remedy is acknowledged by pressing the button.
If the fault cannot be eliminated, inform Customer Service:

Global Service Division


#1 Walter Kratz Drive
Jonesboro, Arkansas 72401
shooting
Trouble-

( (800) 445 0624

75
Error Meaning Correction
Full condensation tank (only when using an original condensate
Empty condensation container.
container)

Fault in condensation pump

Temperature sensor for heating (air conditioner)

Temperature sensor for cooling (air conditioner)

Fault in temperature sensor for UV low-pressure lamps

Temperature sensor for room

Panel switch for shoulder tanner

shooting
Trouble-
Air-vane switch does not switch on with fan running

Air-vane switch does not switch off 1 minute after fan switches off

Fault in front face tanner

76
Error Meaning Correction

Fault in centre face tanner

Fault in face tanner rear

Fault in face tanner side section

Panel switch on decorative panel on canopy

Panel switch of acrylic glass panel on sunbed base/side section

Emergency switch-off time exceeded

I²C bus fault


shooting
Trouble-

Switching error in series circuit of safety switch

Auxiliary controller

Heating controller

77
Error Meaning Correction

Face tanner controller

Speed control 1

Speed control 2

Audio amplifier

Channel selection

Real-time clock

Parameter memory

shooting
Incorrect equipment of controller

Trouble-
78
Index

Index
A D H
Accent lights De-energizing device .................................. 34 Hand-held unit, changing presettings..........72
Operation ........................................... 21 Disposal of lamps........................................ 13
I
Replacing ........................................... 56
E Intended use..................................................5
Accent lights front panel, replacing............. 57
Equipment................................................... 10 Interior lighting.............................................48
Acrylic glass panels .................................... 11
Error codes.................................................. 75
Air condition, Condensate, filter mat........... 63 L
Export.......................................................... 10
AROMA Label...............................................................I
Exposure schedule........................................ II
Operation ........................................... 27 Load, maximum...........................................33
Replacing aroma pots ........................ 65 Eye injuries.................................................... 5
Long-term consequences..............................6
B F
M
Bed tolerance in room................................. 33 Face tanner, operation................................ 22
Maintenance schedules...............................36
Fan delay .................................................... 19
C Minors............................................................6
Fault codes.................................................. 75
Channel, operation ..................................... 30 Filter mats O
Children ........................................................ 6 Air condition, cleaning/replacing......... 63 Operator, important information ....................5
Circuit breakers........................................... 34 Canopy, cleaning/replacing................ 60 Order numbers ................................36, 37, 38
Index

Cleaning schedules .................................... 35 Shoulder tanner, cleaning/replacing... 61 Overview


Code Filter panels, cleaning ........................... 52, 55 Maintenance .......................................35
Defining a code with hand-held unit... 72 Filter, lower section, cleaning...................... 58 Operation............................................17
Defining a code with operating panel. 71 Frequency ................................................... 32
Condensate, air condition ........................... 63 Fusing ......................................................... 32
Contact ....................................................... 16
G
Global Service Division .................................. I

79
Index

P Symbols ........................................................ 7 U
Palm, changing presettings ........................ 72 Cleaning ............................................... 8 UL Standard ................................................10
Plastic ......................................................... 12 Draining................................................ 9 UV high-pressure lamps
Power consumption .................................... 32 Filter panel............................................ 7 Canopy ...............................................53
Powerinput.................................................. 32 Filter/filter mat....................................... 9 Side section ........................................50
Preparation time ......................................... 19 High-pressure lamp .............................. 7 UV lamps, maintenance schedule...............38
Hot surface ........................................... 7 UV low-pressure lamps
Presettings.................................................. 70
Low-pressure lamp............................... 7 Canopy ...............................................46
Table .................................................. 73
Press button ......................................... 8 lower section.......................................41
R Replacing ............................................. 9 Shoulder tanner ..................................43
Relamping instructions, general ................. 40 Safety switch ........................................ 8 side section.........................................45
Room temperature, maximum .................... 33 Soltron key ........................................... 7
Starter................................................... 7 V
S Visual inspection .................................. 9 Ventilation....................................................14
Safety information..................................... II, 5 VITALIZER
T
Settings at start........................................... 20 Operation......................................28, 29
Tanning instructions.................................... 13
Shoulder tanner Replacing canister ..............................67
Tanning times................................................ II
Filter mats .......................................... 61 Voltage ........................................................32
Lamps ................................................ 43 Technical data............................................. 32
Volume, operation .......................................31
Operation ........................................... 23 Termination of tanning ................................ 20

Index
Skin types ................................................... 14 Troubleshooting .......................................... 75
Spare parts ................................................. 11 Type label....................................................... I
Start of tanning session .............................. 19
Sun screen.................................................. 14
Surround cooling, operation........................ 25

80
Warranty

Soltron – Limited Warranty


Soltron warrants its products to be free from defects in materials and If the warranty card is not registered, proof of purchase from Soltron or
workmanship under intended normal use as described in the unit's Oper- its authorized dealer or distributor will be required prior to any consider-
ation and Instruction Manual, for a period of three (3) years from date of ation on warranty claims. This could result in service delays.
sale. This warranty is extended to the individual or legal entity, whose name
This Limited Warranty applies only to the original purchaser of the equip- appears on the warranty registration card filed with Soltron, or whose
ment through Soltron or its authorized dealer or distributor, and is not name appears on the original sale document and may not be transferred
transferable. to any other individual or legal entity.
Soltron obligations under this warranty are limited to repair or replace- This warranty does not apply to any failure of the product, or any parts of
ment of any defective part without charge for that part to the original pur- the product due to alterations, modifications, misuse, abuse, accident,
chaser, with the following exceptions: improper maintenance, improper installation, acts of God or if the serial
A. Fluorescent lamps are warranted against defects for a period of thirty number on the product has been removed, altered or defaced. Adequate
(30) days from date of sale. packaging must be used for returned goods to prevent freight damage.
B. Only parts obtained through Soltron, its authorized dealers or distribu- There are no warranties which extend beyond the description on
tors may be used. Transportation costs for parts shipped to the con- the face hereof. There is no express or implied warranty of fitness
sumer and the return of defective parts to Soltron are not included. of merchantability.
C. Labor will be furnished without charge for ninety (90) days from date The remedies provided in this limited warranty are the exclusive re-
of purchase only. All labor and related charges must be authorized by medies provided to the purchaser by Soltron and are provided in
substitution of all other remedies. Consequential and incidental da-
Limited Warranty

Soltron prior to start of repairs, and must coincide with Soltron estab-
lished rates and time allotment policy. mages are excluded.
D. Acrylic: Refer to Manufacturer's Acrylic Warranty Policy. No person, firm or corporation is authorized to obligate Soltron for any li-
ability in connection with the sale or use of these goods.
It is imperative that the original customer completes and returns the en-
closed warranty card within 10 days after purchase to insure valid regis-
tration and coverage for potential claims.

81
Warranty

Limited Acrylic Warranty


Soltron warrants its acrylic sheets to be free from defects in material and Global Service Division
workmanship, under intended normal use, for a period of one (1) year #1 Walter Kratz Drive
from date of sale of the tanning bed. Due to the tanning lotions, cosmet- Jonesboro, Arkansas 72401
ics, disinfectant and improper cleaners used on tanning surfaces that
cannot be controlled by Soltron, after the first thirty (30) days of warranty
period. Acrylic will be subject to a prorated cost to the consumer on ( (800) 445 0624
breakage.
Soltron obligations do not include transportation charges on replacement
acrylic.
Soltron assumes no liability for the cost of removing defective sheets or
installing replacement sheets, nor for damage to persons or property.
To make a claim, contact an authorized dealer or distributor of Soltron or
Global Service Division with the model number, the serial number, and
the date of purchase of the bed in which the acrylic will be used.
There are no warranties which extend beyond the description on
the face hereof. There is no express or implied warranty of fitness
or merchantability.
The remedies provided in this limited warranty are the exclusive re-

Acrylic Warranty
medies provided to the purchaser by Soltron and are provided in
substitution of all other remedies. Consequential and incidental da-
mages are excluded.

82
Warranty

Warranty Claims
Policy & Procedures working order.
1. When to file a Warranty Claim: Each dealer/distributor has their own internal procedure for handling
In the event that your tanning system is not functioning properly under in- Warranty Claims and credits.
tended normal use as described in the unit's Operation an Instruction NOTE: Soltron, the manufacturer, does not involve itself in the direct han-
Manual, you may then have established cause to file a Warranty Claim. dling of a Warranty Claim except where mitigating circumstances apply
NOTE: Both the tanning system and legal registered owner and where required by law.
must meet the criteria established under Soltron Limited War-
Parts Warranty Claim/Credit Review
ranty as described in this manual before any Warranty Claim
will be considered. 1. Customer calls Soltron and notifies the Service Department of prob-
lem
2. Where to call to place a Warranty Claim:
2. Soltron Service Department determines course of action.
Soltron is supported nationwide by an extensive dealer/distributor net-
work through whom the majority of our units are sold. These dealers/dis- 3. Soltron ships part and R.A.I. to customer freight collect and bills cus-
tributors are required by contract to stock sufficient parts to meet the tomer on net30 basis for part only.
various warranty and nonwarranty needs of their customers. 4. Customer, within 15 days of receiving new part, returns defective part
Therefore, in order for you to properly file a Warranty Claim, you must lo- to Soltron along with R.A.I.
cate the name and phone number of the dealer/distributor through whom 5. Upon receipt of defective part and R.A.I., Soltron issues customer a
you purchased your unit. Normally this information can be easily located credit invoice which offsets original bill. Customer's account is re-
Warranty Claims

either on your paid invoice or other proof of purchase documentation that turned to zero balance concerning this claim.
you received when taking delivery of the unit. NOTE: If part returned to Soltron proves to be operational
Next, notify the dealer/distributor of the serial number, model number and and not defective, or if product code numbers on part do not
date unit was purchased. This will initiate the Warranty Claim process. correspond with individual unit date on file with Soltron, then
Upon determination of the problem, your dealer/distributor can then sup- a 30% restocking fee will be charged in addition to the retail
ply you with the part(s) and proper instructions to return your unit to purchase price of part.

83
Warranty

Acknowledgment of the Agreement is not required for acceptance of the do not interfere with the designed function of the unit.
foregoing stipulations. This warranty does not include failure of the product due to alteration,
modifications, misuse, abuse, improper maintenance, improper installa-
Labor Warranty Claim/Credit Procedures
tion or repair.
Soltron furnishes labor without charge for a period of 90 days from date
This warranty is not transferable and is only applicable to the original pur-
of purchase. All labor and related charges must be authorized by Soltron
chaser named on a completed and registered warranty record at Soltron
prior to start or repairs, and must coincide with Soltron established rates
headquarters.
and time allotment policy.
Soltron obligations do not include transportation charged on the shipping
Please contact our Service Department for authorization and billing pro-
of new components to the customer or on the return of defective compo-
cedures.
nents of the manufacturer. All freight charges must be paid by the cus-
tomer.
Limited Lifetime Warranty There are no warranties which extend beyond the description on the face
Soltron warrants specific individual components of the Competition Tan- hereof. There is no express or implied warranty of fitness or merchant-
ning Systems against defects in materials and workmanship for the life ability.
of the product. Coverage is limited to units purchased after November 1, The remedies provided in this limited warranty are the exclusive reme-
1994. dies provided to the purchaser by Soltron and are provided in substitution
This warranty is restricted by the following components only: of all other remedies. Consequential and incidental damages are exclud-
ed.
• Steel Back Panels
Notice: Any misuse, abuse, modification, alteration, impro-
• Structural Steel Frame Components

Lifetime Warranty
per maintenance, improper installation, etc. of this product or
• Exterior Steel Body its intended use will subject said party to direct responsibility
NOTE: Components are warranted on an individual basis and liabilities for any and all consequences resulting from
and not as they may effect the complete product. such action. Furthermore, such actions will void all warranties
and may relieve Soltron of any liabilities relating to said pro-
Warranty coverage does not include cosmetic abnormalities such as duct.
scratches, nicks, dents, oxidation of paint or other cosmetic changes that

84
Lifetime Warranty

85
Warranty
801149 / Index „a“ / us / 01.2004
Soltron Inc. ● Business centre, 2950 Xenium Lane North, Suite # 150 – Plymouth MN 55447, Indiana ● Phone: 1-866-243-9861 ● www.soltron.us

Vous aimerez peut-être aussi