Académique Documents
Professionnel Documents
Culture Documents
Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions
Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
On-Line C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC DeltaSIRAfterDownlink (Downlink delta SIR after in the compressed mode)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
the first transmission gap in the transmission gap pattern. The value of the parameter does not include the effect of the bit rate increase during the compressed frame. Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces 0...3 0.1 dB internal_value = gui_value * 10 1.5 Admission Control On-Line C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC DeltaSIRDownlink (Downlink delta SIR in the compressed mode)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Parameter name Abbreviated name 3GPP name Managed Object Parameter group Classification Multiplicity Description
Downlink orthogonality factor DownlinkOrthog WRAB ACConfiguration Radio Resource Utilisation 1 This parameter defines the orthogonality factor of the downlink channel. The orthogonality factor quantifies the delay spread of the downlink channel. Value 1 of the parameter represents the channel without any multipath propagation. The orthogonality factor is used in defining the code power of the radio link. 0...1 0.01 internal_value = gui_value * 100 0.5 Admission Control On-Line C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC RNC -> OMS topology RNC -> OMS topology UI DownlinkOrthog (Downlink orthogonality factor)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
EDCHBLERAdjCSVoice10 (HARQ threshold for OLPC of HS CS voice E-TTI 10 ms) EParameter name Abbreviated name 3GPP name Managed Object Parameter group Classification Multiplicity Description HARQ threshold for OLPC of HS CS voice E-TTI 10 ms EDCHBLERAdjCSVoice10 WRAB ACConfiguration Radio Resource Utilisation 1 Management parameter defines the L1 HARQ retransmissions threshold for the outerloop power control dedicated to the EDCH MAC-d flow of the CS voice when the E-TTI equals to 10 ms. Its value is used by the outer loop power control of the RNC for the detection of the block error. Block error is occurred if the number of the retransmissions equals to the value of the parameter or a HARQ failure has observed. Outerloop power control adjusts the uplink DPCCH SIR target after the occurred block errors. This threshold value is used when the BLER target has been defined with the management parameter BLER target for the HS CS voice E-TTI 10 ms. 1...15 1 internal_value = gui_value 1 Block error is detected from the first HARQ retransmission. Admission Control On-Line EbNoSetIdentifier of WCEL - Parameter "Eb/No parameter set identifier" identifies the WRAB object associated with the cell of
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters
the radio link. Parameter relationships Related options Feature dependencies Interfaces RAC <-> RNC EM <-> RNC RACApp <-> RAC EDCHBLERAdjCSVoice10 (HARQ threshold for OLPC of HS CS voice E-TTI 10 ms) CS Voice Over HSPA
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Description
The parameters of this structure define the planned Eb/N0s for the DCHs which are transferring radio bearers of the PS interactive and background RABs. With these parameters it is possible to define two quality target values and their planned Eb/N0s. Either of the two quality target values can be assigned to each of the DCH user data rates 8, 16, 32, 64, 128, 256 and 384 kbps, separately for the uplink and downlink DCHs. Additional management parameters are introduced to assign a data rate gain value to the higher data rate DCHs; final Eb/N0 values are achieved by adding the data rate gain to the quality target specific Eb/N0 values. The parameters are applied in producing the service specific rate matching attributes. Admission Control EbNoDCHOfPSNRTPriQua EbNoDCHOfPSNRTPrim EbNoDCHOfPSNRTSec EbNoDCHOfPSNRTSecQua EbNoDCHOfPSNRTSelQuaDL EbNoDCHOfPSNRTSelQuaUL Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfPSNRT (Rate matching with the PS NRT DCH)
Formula for getting internal value Default value Default value notes Related functions Child parameters
Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
References
Table 2047:
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range
Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
0.1 dB internal_value = gui_value * 10 6.5 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfPSNRTSec (Secondary Eb/N0 of the PS NRT DCH)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Abbreviated name 3GPP name Managed Object Parameter group Classification Multiplicity Description
EbNoDCHOfPSNRTSelQuaDL ACConfiguration Radio Resource Utilisation 1 This parameter defines whether the primary or the secondary quality target is used for a particular data rate of the downlink DCH which is transferring radio bearer of the PS interactive or background RAB. Either of the two quality target values, which are defined with the management parameters "Primary quality target of the PS NRT DCH" and "Secondary quality target of the PS NRT DCH", can be assigned to each of the DCH user data rates 8, 16, 32, 64, 128, 256, and 384 kbps. If a DCH user data rate is selected with the parameter, then the primary quality target is used for it; otherwise the secondary quality target is used. Bit 0: 8 kbps, Bit 1: 16 kbps, Bit 2: 32 kbps, Bit 3: 64 kbps, Bit 4: 128 kbps, Bit 5: 256 kbps, Bit 6: 384 kbps 127 Primary quality target is used for all the downlink DCH data rates. Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfPSNRTSelQuaDL (Quality target selector for DL PS NRT DCH)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships
C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfPSNRTSelQuaUL (Quality target selector for UL PS NRT DCH)
Formula for getting internal value Default value Default value notes Related functions Child parameters
Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
is used, separately for the uplink and downlink DCHs. Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces -6.3...0 0.1 internal_value = gui_value * 10 -2 Default value represents the block error ratio of 1%. Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfPSStrPriQua (Primary quality target of the PS streaming DCH)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
References
Table 2055:
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
-1.3 Default value represents the block error ratio of 5%. Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfPSStrSecQua (Secondary quality target of the PS streaming DCH)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
ACConfiguration Radio Resource Utilisation 1 This parameter defines whether the primary or the secondary quality target is used for a particular data rate of the uplink DCH which is transferring radio bearer of the PS streaming RAB. Either of the two quality target values, which are defined with the management parameters "Primary quality target of the PS streaming DCH" and "Secondary quality target of the PS streaming DCH", can be assigned to each of the DCH user data rates 8, 16, 32, 64, and 128 kbps. If a DCH user data rate is selected with the parameter, then the primary quality target is used for it; otherwise the secondary quality target is used. Bit 0: 8 kbps, Bit 1: 16 kbps, Bit 2: 32 kbps, Bit 3: 64 kbps, Bit 4: 128 kbps 31 Primary quality target is used for all the uplink DCH data rates. Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfPSStrSelQuaUL (Quality target selector for UL PS streaming DCH)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Formula for getting internal value Default value Default value notes Related functions Child parameters
Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
EM <-> RNC RACApp <-> RAC References Table 2060: EbNoDCHOfSRB (Rate matching with the SRB DCH)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
internal_value = gui_value * 10 -2 Default value represents the block error ratio of 1 %. Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC -
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Abbreviated name 3GPP name Managed Object Parameter group Classification Multiplicity Description Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
EbNoDCHOfSRB34Qua DCH quality target ACConfiguration Radio Resource Utilisation 1 This parameter defines the quality target for the DCH which transfers the signalling radio bearer of the data rate 3.4 kbps. The same quality target is used for the uplink and downlink DCHs of the SRB. -6.3...0 0.1 internal_value = gui_value * 10 -2 Default value represents the block error ratio of 1 %. Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfSRB34Qua (Quality target of the SRB3.4 DCH)
Formula for getting internal value Default value Default value notes Related functions Child parameters
Modification
EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC -
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Radio Resource Utilisation 1 This parameter defines the value of the data rate gain for the planned Eb/N0s of the DCHs which transfer the radio bearers of the CS data RABs. Data services are generally encoded with Turbo, which becomes more efficient with the higher data rates, in the same way as interleaving does. Higher transmission power is used for the DPCCH with the higher data rates; it improves the channel estimation and consequently the Eb/N0 performance. Therefore the rate matching Eb/N0s can be reduced also for the low data rate bearers when they are transferred in the multiservice configuration of an aggregate data rate which is high enough. The selector parameters "Data rate gain selector for the Eb/N0 of the UL DCH" and "Data rate gain selector for the Eb/N0 of the DL DCH" define the physical channel data rates (spreading factors) for which the data rate gain is valid. If the value of the selector parameter shows that with the maximum DPDCH data rate the gain is applicable, then the value of the actual gain parameter is added to the value of the rate matching Eb/N0 value of the data service. The parameter is significant with the CS transparent and non-transparent services. -6...0 0.1 dB internal_value = gui_value * 10 -2 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHRateGainCSData (Data rate gain for the Eb/N0 of the CS data)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
EbNoDCHRateGainPSData (Data rate gain for the Eb/N0 of the PS data DCH)
Parameter name Abbreviated name 3GPP name Managed Object Parameter group Classification Multiplicity Description Data rate gain for the Eb/N0 of the PS data DCH EbNoDCHRateGainPSData ACConfiguration Radio Resource Utilisation 1 This parameter defines the value of the data rate gain for the planned Eb/N0s of the DCHs which transfer the radio bearers of the PS streaming, interactive and background RABs. Data services are generally encoded with Turbo, which becomes more efficient with the higher data rates, in the same way as interleaving does. Higher transmission power is used for the DPCCH with higher data rates; it improves the channel estimation and consequently the Eb/N0 performance. Therefore the rate matching Eb/N0s can be reduced also for the low data rate bearers when they are transferred in the multiservice configuration of an aggregate data rate which is high enough. The selector parameters "Data rate gain selector for the Eb/N0 of the UL DCH" and "Data rate gain selector for the Eb/N0 of the DL DCH" define the physical channel data rates (spreading factors) for which the data rate gain is valid. If the value of the selector parameter shows that with the maximum DPDCH data rate the gain is applicable, then the value of the actual gain parameter is added to the value of the rate matching Eb/N0 value of the data service. -6...0 0.1 dB internal_value = gui_value * 10 -2 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell.
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters
C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC -
EbNoDCHRateGainPSData (Data rate gain for the Eb/N0 of the PS data DCH)
EbNoDCHRateGainSFDown (Data rate gain selector for the Eb/N0 of the DL DCH)
Parameter name Abbreviated name 3GPP name Managed Object Parameter group Classification Multiplicity Description Data rate gain selector for the Eb/N0 of the DL DCH EbNoDCHRateGainSFDown ACConfiguration Radio Resource Utilisation 1 This parameter defines whether the data rate gain is applied with a particular downlink DPDCH data rate in the definition of the planned Eb/N0s for the downlink DCHs. The selector parameter defines for each DPDCH spreading factor whether the data rate gain shall be applied or not. If the value of the selector parameter shows that the data rate gain shall be applied with the minimum downlink DPDCH spreading factor, then the value of the actual service specific gain parameter is added to the value of the rate matching Eb/N0 value of the service. Bit 0: SF 4, Bit 1: SF 8, Bit 2: SF 16, Bit 3: SF 32, Bit 4: SF 64, Bit 5: SF 128, Bit 6: SF 256 15 Data rate gain is applied with the uplink DPDCH data rates higher than 120 kbps. Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHRateGainSFDown (Data rate gain selector for the Eb/N0 of the DL DCH)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
EbNoDCHRateGainSFUp (Data rate gain selector for the Eb/N0 of the UL DCH)
Parameter name Abbreviated name 3GPP name Managed Object Parameter group Classification Multiplicity Description Data rate gain selector for the Eb/N0 of the UL DCH EbNoDCHRateGainSFUp ACConfiguration Radio Resource Utilisation 1 This parameter defines whether the data rate gain is applied with a particular uplink DPDCH data rate in the definition of the planned Eb/N0s for the uplink DCHs. The selector parameter defines for each DPDCH spreading factor whether the data rate gain shall be applied or not. If the value of the selector parameter shows that the data rate gain shall be applied with the
minimum uplink DPDCH spreading factor, then the value of the actual service specific gain parameter is added to the value of the rate matching Eb/N0 value of the service. Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces Bit 0: SF 4, Bit 1: SF 8, Bit 2: SF 16, Bit 3: SF 32, Bit 4: SF 64, Bit 5: SF 128, Bit 6: SF 256 7 Data rate gain is applied with the uplink DPDCH data rates higher than 120 kbps. Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHRateGainSFUp (Data rate gain selector for the Eb/N0 of the UL DCH)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
References
Table 2071:
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
-4 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC RNC -> OMS topology RNC -> OMS topology UI EbNoDCHRxDiv4 (Cell offset in the UL Eb/N0, 4-way Rx diversity)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
WRAB ACConfiguration Radio Resource Utilisation 1 This parameter defines the planned Eb/N0 for the E-DCH MAC-d flow of the CS voice service. Parameter is applicable for both the AMR codec sets (12.2), (12.2, 7.95, 5.9, 4.75)and(5.9, 4.75), and the AMR-WB codec set (12.65, 8.85, 6.6). Planned Eb/No value is used with both L1 BLER targets values defined with the management parameters BLER target for the HS CS voice E-TTI 10 ms and BLER target for the HS CS voice E-TTI 2 ms. The radio resource management functionality uses the Eb/N0 in the uplink load estimations. -11...20 0.1 dB internal_value = gui_value * 10 4 Admission Control On-Line EbNoSetIdentifier of WCEL - The parameter "Eb/No parameter set identifier" identifies the WRAB object associated with the cell of the radio link. CS Voice Over HSPA RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoEDCHCSAMR (Eb/N0 planned for the E-DCH MAC-d flow of CS voice)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Formula for getting internal value Default value Default value notes Related functions Child parameters
Related options
HSUPA (optional) AND HSUPA Basic RRM (optional) AND QoS Aware HSPA Scheduling (optional) AND Streaming QoS for HSPA (optional) RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoEDCHOfPSStr (EbNo for E-DCH Streaming)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options
Range
Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options
0.1 dB internal_value = gui_value * 10 7.5 Admission Control On-Line HSUPA (optional) AND HSUPA Basic RRM (optional) AND QoS Aware HSPA Scheduling (optional) AND Streaming QoS for HSPA (optional) RAC <-> RNC EM <-> RNC RACApp <-> RAC EDCHPSStr16Kbps (EbNo for E-DCH Streaming 16Kbps)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options
Abbreviated name 3GPP name Managed Object Parameter group Classification Multiplicity Description
EDCHPSStr32Kbps ACConfiguration Radio Resource Utilisation 1 This parameter defines the planned Eb/N0 for E-DCHs with 32 Kbps guaranteed bit rate which are transferring radio bearers of the PS streaming RABs. The parameter is applied in the definition of the load factor for E-DCH streaming RAB which is used in admission control and packet scheduling algorithms of the radio resource management. -11...20 0.1 dB internal_value = gui_value * 10 7 Admission Control On-Line HSUPA (optional) AND HSUPA Basic RRM (optional) AND QoS Aware HSPA Scheduling (optional) AND Streaming QoS for HSPA (optional) RAC <-> RNC EM <-> RNC RACApp <-> RAC EDCHPSStr32Kbps (EbNo for E-DCH Streaming 32Kbps)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options
Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options
internal_value = gui_value * 10 5 Admission Control On-Line HSUPA (optional) AND HSUPA Basic RRM (optional) AND QoS Aware HSPA Scheduling (optional) AND Streaming QoS for HSPA (optional) RAC <-> RNC EM <-> RNC RACApp <-> RAC -
Formula for getting internal value Default value Default value notes Related functions Child parameters
Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
ACConfiguration Radio Resource Utilisation 1 This parameter defines the planned Eb/N0 for the CS non transparent data service. The management parameter "Quality target of the CS non transparent data" defines the appropriate value of the quality target. This parameter is applicable for all DCH user data rates when the 1-way receiver diversity is assumed. The value of the parameter represents the low data rate value without the possible data rate gain. The data rate gain value is defined separately with the management parameter "Data rate gain for the Eb/N0 of the CS data". The decision whether the data rate gain is applied with a particular physical channel data rate is done with the management parameters "Data rate gain selector for the Eb/N0 of the UL DCH" for uplink and "Data rate gain selector for the Eb/N0 of the DL DCH" for downlink. The final planned Eb/N0 value is obtained by adding the data rate gain to the Eb/N0 value of the parameter. The resulting Eb/No value is applied in producing the service specific rate matching attributes. The CS non transparent data service is transferred with CS streaming RAB. -11...20 0.1 dB internal_value = gui_value * 10 8 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfCSDataNT (Planned Eb/N0 of the CS non transparent data)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships
C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfCSDataNTQua (Quality target of the CS non transparent data)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
rates both in the uplink and the downlink transfer directions. The CS transparent data service is transferred with CS conversational RAB. Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces -6.3...0 0.1 internal_value = gui_value * 10 -2.7 Default value represents the block error ratio of 0.2 %. Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfCSDataTQua (Quality target of the CS transparent data)
Formula for getting internal value Default value Default value notes Related functions Child parameters
Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
internal_value = gui_value * 10 8 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC -
EbNoDCHOfCSNBAMRb (Planned Eb/N0 the CS NB-AMR subflow B) NBParameter name Abbreviated name 3GPP name Managed Object Planned Eb/N0 the CS NB-AMR subflow B EbNoDCHOfCSNBAMRb -
ACConfiguration Radio Resource Utilisation 1 This parameter defines the value of the planned Eb/N0 for the DCH, which transfers the protection class B RAB subflow of the CS NB-AMR speech with the codec set (12.2), (12.2, 7.95, 5.9, 4.75) or (5.9, 4.75). The value of the Eb/N0 is expressed in relation to the Eb/N0 value of the protection class A subflow DCH. The parameter is applied for the uplink and downlink DCHs. The Eb/No value is applied in producing the service specific rate matching attributes. -3...3 0.1 dB internal_value = gui_value * 10 -0.5 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfCSNBAMRb (Planned Eb/N0 the CS NB-AMR subflow B)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Formula for getting internal value Default value Default value notes Related functions Child parameters
Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
internal_value = gui_value * 10 8 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC -
EbNoDCHOfCSWBAMRb (Planned Eb/N0 the CS WB-AMR subflow B) WBParameter name Abbreviated name 3GPP name Managed Object Planned Eb/N0 the CS WB-AMR subflow B EbNoDCHOfCSWBAMRb -
ACConfiguration Radio Resource Utilisation 1 This parameter defines the value of the planned Eb/N0 for the DCH, which transfers the protection class B RAB subflow of the CS WB-AMR speech with the codec set (12.65, 8.85, 6.6). The value of the Eb/N0 is expressed in relation to the Eb/N0 value of the protection class A subflow DCH. The parameter is applied for the uplink and downlink DCHs. The Eb/No value is applied in producing the service specific rate matching attributes. -3...3 0.1 dB internal_value = gui_value * 10 -0.5 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. C-Iub: Changes to Eb/N0 Parameterization RAC <-> RNC EM <-> RNC RACApp <-> RAC EbNoDCHOfCSWBAMRb (Planned Eb/N0 the CS WB-AMR subflow B)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
RACApp <-> RAC References Table 2099: L1BLERTEDCHVoice10 (BLER target for the HS CS voice E-TTI 10 ms)
L1BLERTEDCHVoice2 (BLER target for the HS CS voice E-TTI 2 ms) EParameter name Abbreviated name 3GPP name Managed Object Parameter group Classification Multiplicity Description BLER target for the HS CS voice E-TTI 2 ms L1BLERTEDCHVoice2 WRAB ACConfiguration Radio Resource Utilisation 1 This parameter defines the L1 BLER target for the E-DCH MAC-d flow of the CS voice when the E-TTI equals to 2 ms. It is used by the outer loop power control of the RNC. E-HARQ retransmission threshold for the block error detection is defined with the management parameter "HARQ threshold for OLPC of HS CS voice E-TTI 2 ms". Value of the parameter equals to the log10 of the BLER value. -6.3...0 0.1 internal_value = gui_value * 10 -1 Default value equals to 10% of BLER target. Admission Control On-Line EbNoSetIdentifier of WCEL - Parameter "Eb/No parameter set identifier" identifies the WRAB object associated with the cell of the radio link. CS Voice Over HSPA RAC <-> RNC EM <-> RNC RACApp <-> RAC L1BLERTEDCHVoice2 (BLER target for the HS CS voice E-TTI 2 ms)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Maximum SIR target values are defined with a management parameter in relation to the initial SIR target values. Formula for getting internal value Default value Default value notes Related functions Child parameters Admission Control SIRDPCCHInitialDCH128 SIRDPCCHInitialDCH16 SIRDPCCHInitialDCH256 SIRDPCCHInitialDCH32 SIRDPCCHInitialDCH4 SIRDPCCHInitialDCH64 SIRDPCCHInitialDCH8 SIRDPCCHInitialDCHHS128 SIRDPCCHInitialDCHHS16 SIRDPCCHInitialDCHHS256 SIRDPCCHInitialDCHHS32 SIRDPCCHInitialDCHHS4 SIRDPCCHInitialDCHHS64 SIRDPCCHInitialDCHHS8 SIRDPCCHInitialDCHMax SIRDPCCHInitialDCHMin SIRDPCCHInitialDCHOffset SIRDPCCHInitialDCHRxDiv2 SIRDPCCHInitialDCHRxDiv4 Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. RAC <-> RNC EM <-> RNC RACApp <-> RAC SIRDPCCHInitialDCH (Initial SIR target for UL DPCCH with DPDCH)
Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies
Interfaces
RAC <-> RNC EM <-> RNC RACApp <-> RAC SIRDPCCHInitialDCH128 (UL SIR target without HS-DPCCH - DPDCH SF 128)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
4.5 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell RAC <-> RNC EM <-> RNC RACApp <-> RAC SIRDPCCHInitialDCH256 (UL SIR target without HS-DPCCH - DPDCH SF 256)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Radio Resource Utilisation 1 This parameter defines the initial SIR target for the UL DPCCH when the radio link has only DCHs configured in the uplink transfer direction and the minimum spreading factor of UL DPDCH is 4. One-way receiver diversity is assumed. HS-DPCCH must not be configured in the radio link. -8.2...17.3 0.1 dB internal_value = gui_value * 10 9 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell RAC <-> RNC EM <-> RNC RACApp <-> RAC SIRDPCCHInitialDCH4 (UL SIR target without HS-DPCCH - DPDCH SF 4)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships
RAC <-> RNC EM <-> RNC RACApp <-> RAC SIRDPCCHInitialDCHHS128 (UL SIR target with HS-DPCCH - DPDCH SF 128)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
SIRDPCCHInitialDCHHS256 (UL SIR target with HS-DPCCH - DPDCH SF 256) HSParameter name Abbreviated name 3GPP name Managed Object Parameter group Classification Multiplicity Description UL SIR target with HS-DPCCH - DPDCH SF 256 SIRDPCCHInitialDCHHS256 ACConfiguration Radio Resource Utilisation 1 This parameter defines the initial SIR target for the UL DPCCH when the radio link has only DCHs configured in the uplink transfer direction and the minimum spreading factor of UL DPDCH is 256. One-way receiver diversity is assumed. HS-DPCCH must be configured in the radio link. -8.2...17.3 0.1
Range Step
Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
dB internal_value = gui_value * 10 7.5 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. RAC <-> RNC EM <-> RNC RACApp <-> RAC SIRDPCCHInitialDCHHS256 (UL SIR target with HS-DPCCH - DPDCH SF 256)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
ACConfiguration Radio Resource Utilisation 1 This parameter defines the initial SIR target for the UL DPCCH when the radio link has only DCHs configured in the uplink transfer direction and the minimum spreading factor of UL DPDCH is 4. One-way receiver diversity is assumed. HS-DPCCH must be configured in the radio link. -8.2...17.3 0.1 dB internal_value = gui_value * 10 12 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. RAC <-> RNC EM <-> RNC RACApp <-> RAC SIRDPCCHInitialDCHHS4 (UL SIR target with HS-DPCCH - DPDCH SF 4)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Range Step Units Formula for getting internal value Default value Default value notes
Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. RAC <-> RNC EM <-> RNC RACApp <-> RAC SIRDPCCHInitialDCHMax (Maximum SIR target for UL DPCCH with DPDCH only)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Description
This parameter defines the initial SIR target offset for the UL outer loop power control when the radio link has only DCHs configured in the uplink transfer direction. If the initial SIR target value is sent to the BTS and to the outer loop power controller of the RNC, the value of the parameter is added to the produced initial SIR target value. -6...6 0.1 dB internal_value = gui_value * 10 0 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. RAC <-> RNC EM <-> RNC RACApp <-> RAC SIRDPCCHInitialDCHOffset (SIR target for UL outerloop power control with DPDCH)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
SIRDPCCHInitialDCHRxDiv2 (SIR target for UL DPCCH with DPDCH, 2-way Rx diversity) 2Parameter name Abbreviated name 3GPP name Managed Object Parameter group Classification Multiplicity Description SIR target for UL DPCCH with DPDCH, 2-way Rx diversity SIRDPCCHInitialDCHRxDiv2 ACConfiguration Radio Resource Utilisation 1 This parameter defines the initial SIR target offset value for the UL DPCCH when the radio link has only DCHs configured in the uplink transfer direction and the 2-way receiver diversity is assumed. Experienced SIR depends also on the channel conditions, such as propagation environment, multipath conditions and mobile speed. Besides the receiver diversity gain, the parameter quantifies also the channel conditions defining an offset value for the SIR target. The final initial value of the SIR target is achieved by adding the value of the parameter to the initial SIR target value, which is produced for the case when the 1-way receiver diversity is assumed. -6...0 0.1 dB internal_value = gui_value * 10 -3 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. RAC <-> RNC EM <-> RNC RACApp <-> RAC SIRDPCCHInitialDCHRxDiv2 (SIR target for UL DPCCH with DPDCH, 2-way Rx diversity)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
SIRDPCCHInitialDCHRxDiv4 (SIR target for UL DPCCH with DPDCH, 4-way Rx diversity) 4Parameter name Abbreviated name 3GPP name Managed Object Parameter group Classification Multiplicity Description SIR target for UL DPCCH with DPDCH, 4-way Rx diversity SIRDPCCHInitialDCHRxDiv4 ACConfiguration Radio Resource Utilisation 1 This parameter defines the initial SIR target offset value for the UL DPCCH when the radio link has only DCHs configured in the uplink transfer direction and the 4-way receiver diversity is assumed. Experienced SIR depends also on the channel conditions, such as propagation environment, multipath conditions, and mobile speed. Besides the receiver diversity gain, the parameter quantifies also the channel conditions defining an offset value for the SIR target. The final initial value of the SIR target is achieved by adding the value of the parameter to the initial SIR target value, which is produced for the case when the 1-way receiver diversity is assumed. -6...0 0.1 dB internal_value = gui_value * 10 -4 Admission Control Requires object locking EbNoSetIdentifier of WCEL - EbNoSetIdentifier identifies the WRAB object associated with the cell. RAC <-> RNC EM <-> RNC RACApp <-> RAC SIRDPCCHInitialDCHRxDiv4 (SIR target for UL DPCCH with DPDCH, 4-way Rx diversity)
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
Default value
Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces
The value is set by the system. Not modifiable Radio Network Access Regulation Function RNC -> RAC RNC -> EM -
Range Step Units Formula for getting internal value Default value Default value notes Related functions Modification Related parameters Parameter relationships Related options Feature dependencies Interfaces