Académique Documents
Professionnel Documents
Culture Documents
2. Remove the floor console. For additional 12. Through the instrument cluster opening, loosen
information, refer to Floor Console in this the instrument panel cowl top bracket nut.
section. • Tighten to 9 Nm (80 lb-in).
3. Remove the 2 scuff plates. 13. Remove the 2 instrument panel lower support
bolts.
4. Remove the 2 A-pillar lower trim panels.
• To install, tighten to 9 Nm (80 lb-in).
5. NOTE: On coupe, install the front locating
14. Remove the 2 instrument panel end panels.
hook, then snap the A-pillar trim panel in place
working rearward. 15. Remove the 4 instrument panel upper support
Remove the 2 A-pillar trim panels. bolts.
• To install, tighten to 20 Nm (15 lb-ft).
6. Remove the instrument cluster. For additional
information, refer to Section 413-01.