Académique Documents
Professionnel Documents
Culture Documents
A few things to keep in rrmd while corrpleting this activity: 1. Do not use the browser Back button or cose or rebad any exam windows during the exam 2. Do not cose Packet Tracer when you are done. It will cose autorretically. 3. Click the Submit Assessment button to sub nit your work.
Introduction
In this practice Packet Tracer Skills Exam, you will: - finish the configuration - establish connectivity of a partiaUy configured to the UKand the Internet network through the use of static and dynalTic routing
Addressing Table
US-HQ
US-R1
192.168.20.1
255.255.255.192
n/a
192.168.20.246 172.16.0.1 192.168.20.65 192.168.20.113 192.168.20.242 172.16.0.2 192.168.20.97 192.168.20.114 172.16.0.3 192.168.20.66
255.255.255.252 255.255.255.255 255.255.255.224 255.255.255.248 255.255.255.252 255.255.255.255 255.255.255.240 255.255.255.248 255.255.255.255 255.255.255.224
n/a n/a n/a n/a n/a n/a n/a n/a n/a 192.168.20.65
US-R2
ServerLAN
192.168.20.62 192.168.20.98
255.255.255.192 255.255.255.240
192.168.20.1 192.168.20.97
Note: The
Configure
the correct IP addresses on US-PC2 and US-Rl. US-Pe2 with the last IP address in the subnet.
-DDDDDDDD Configure
and reserved for the UK The UK subnets are listed in the following table:
10.10. O.0/24 10.10.1.0/24 10.10.2.0/25 10.10.2.128/25 10.10.3.0/25 10.10.3.128/26 10.10.3.192/27 10.10.3.224/28 10.10.3.240/30 10.10.3.244/30 10.10.3.248/30 10.10.3.252/30
.DDDDDDDD Configure
routing table. Use the outbound interface argument. b. ~rify static and default routing.
DDDDDDDD Use OSPF process 10 3 and area O. -DDDDDDDD Advertise Internet each subnet individually with its corresponding wildcard rrask, On US-HQ, do not advertise the subnet to the
or the subnet to UK where there are no OSPF neighbors available . route to US-R1 and US-R2 in OSPF updates.
eODDDDDDD Disable OSPF updates out interfaces DDDDDDDD Configure b. US-HQ to send the default
Modify the default OSPF operation . US-Rl to always be the DR by using a priority of
150.
DDDDDDDD Change the hello interval to 30 seconds on US-Rl and US-R2 for the LAN that these two routers share with ServerLAN . DDDDDDDD \erify OSPF neighbor status.
c.
~rify
-00000000
'krify that the routing tables on US-Rl, US-R2, and US-HQ contain all the expected routes. It rray be necessary to shutdown and then reactivate interfaces to force OSPF to converge.
lersion 1.0 Created in Packet Tracer 5. 3.2. 0027 and MaNell. 0.1 All contents are Copyright@ 1992 - 2011 Cisco System;, Inc. All rights reserved. This docurrent is Cisco Public Inforrmtion.
'/'!'/,"N.x'{Zccrp.ccm
------=""- 192.168.20.98
PC-PT US-PC3
Static
Route
\ 'P~~~'~;J~--------------~
198.133.219.0/30 Server-PT cisco Server 192.0.2.10
YeUow higllig ted del;' es are accessible by clicking0 tl em. Allother devices are locked and ce ot be accessed directly. S-R2 is accessed through the console con ection. S+lQ is accessed t rough a Telnet co nection, See instructions for more nformeno .