Académique Documents
Professionnel Documents
Culture Documents
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
CATALOG
PC104 bus parallel data acquisition series products .......................................2 PEM4712 ....................................................................................................................................3 PEM2712 ....................................................................................................................................6 PEM4311 ....................................................................................................................................9 PEM-RELAY16 ...................................................................................................................10 NetVI Toolkit for Virtual Instrument ..................................................................... 11
- 1/34 -
PRODUCT CATALOG
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
Note: Memory depth can be extended to 8M/CH or 16M/CH. The drivers, application program and toolkit are available at http://www.vidts.com.
- 2/34 -
PRODUCT CATALOG
PEM4712
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
Features
Parallel design, 2 high-speed 40M 12bit ADCs, 2 independent programmable gain channel Achieves 40mV~40V voltage signal acquisition with toolkit High accuracy of measurement with phase consistency Triggering sources: software (manual), internal, external triggering Standard PC104 board card designed Small-sized structure, stacked connection and easy bus drive
Application
Overview By adopting synchronous parallel design, two pieces high-speed 40MSPS 12-bit ADCs, 40M small scaled encapsulated crystal oscillator and two independent programmable gain channels composed of high speed precise operational amplifier and precise attenuation filter network are integrated into the card to achieve large dynamic signal acquisition range of 40Mv~40V with a pre-amplifier. Gain errors and zero-bias of each channel can be removed independently by DAQ controllers fine-tuning which facilitates this product with high measurement accuracy and phase consistency. No manual adjustable component insures the high reliability and stability of the products.
Analog Input The Acquisition card has designed the independent time base and the clock controller. While cascading multiple acquisition of system, each card may have different sampling rate. The trigger lines and clock lines of each board cascade through local bus connecter. Under the control of the unified clock and triggering, the acquisition system achieves the full-synchronized acquisition. The maximum sampling rate of PEM4712 A/D is 40Msps with 18- level sampling rate setting. Each channel can separately control the gain setting with a range of 1V. The maximum sampling depth of each channel can achieve up to 4Msa. The specially designed ring buffer facilitates pre-trigger sampling function, which is suitable for signal recording of transience process of engineering. Delay of pre-trigger and post-trigger samples can cover the maximum period.
- 3/34 -
PRODUCT CATALOG
Triggering Sources
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
PEM4712 has wide range of triggering sources, including software (manual), internal and external triggering. Internal triggering level can be set up freely within current range with options of triggering conditions of rising edge, falling edge, internal dual-threshold, external dual-threshold; external signal complies with TTL electrical standard with options of effectiveness of rising edge and falling edge. Through setting multiple triggering modes, accurate capture of various characteristic signals can be guaranteed.
Specification Characteristics Sampling Rate (sps): 1k40M A/D resolution: 12 bits DC accuracy: 0.2%(FS) Input channel: Parallel synchronous 2 channel Input impedance: 1M//25pF Inter-channel <1(300kHz) Crosstalk: -85dB Voltage input: 1V Bandwidth of input signal: DC: 012MHz Memory depth of each channel (samples): 4M/CH(extended to 8M/CH 16M/CH) Triggering mode: manual, external and internal triggering. Internal triggering conditions includes rising edge and falling edge. The triggering level is adjustable. Interface: PC104 8bits bus phase difference: Operating System Windows 95/98/ME Windows 2000/XP Software DasView2.0 Toolkit Provide DEMO source code under common development platforms and technical support for development. Requirement on Environment Operating Temperature: 0 to 40 Storage Temperature: -40 to 60 Relative Humidity: 40 20 to 90% (no condensation)
- 4/34 -
PRODUCT CATALOG
Functional Block Diagram
buffer amplifier
Anti-alias filter
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
CH0
ADC
SDRAM
1M/25pF
CH1
buffer amplifier
Anti-alias filter
ADC
SDRAM
1M/25pF
External trigger
External trigger modulation
DAQ controller
SDRAM controller
SE2PROM
PC104 Bus
Accessory Model PEM-RELAY16 Description PC104 optical isolation relay control panel PC104 Pre-amplifying controller
Max. Rate(sps)
40M
Memory Depth(sa)
4M/CH
PEM-AMP206
- 5/34 -
PRODUCT CATALOG
PEM2712
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
Features
Parallel design, 2 independent programmable gain channel Achieves 40mV~40V voltage signal acquisition with toolkit High accuracy of measurement with phase consistency Triggering sources: software (manual), internal, external triggering Standard PC104 board card designed Small-sized structure, stacked connection and easy bus drive
Application
Overview
By adopting synchronous parallel design, two pieces high-speed ADCs, 20M small scaled encapsulated crystal oscillator and two independent programmable gain channels composed of high speed precise operational amplifier and precise attenuation filter network are integrated into the card to achieve large dynamic signal acquisition range of 40Mv~40V with a pre-amplifier. Gain errors and zero-bias of each channel can be removed independently by DAQ controllers fine-tuning which facilitates this product with high measurement accuracy and phase consistency. No manual adjustable component insures the high reliability and stability of the products.
Analog Input The Acquisition card has designed the independent time base and the clock controller. While cascading multiple acquisition of system, each card may have different sampling rate. The trigger lines and clock lines of each board cascade through local bus connecter. Under the control of the unified clock and triggering, the acquisition system achieves the full-synchronized acquisition. The maximum sampling rate of PEM2712 A/D is 20Msps with 18- level sampling rate setting. Each channel can separately control the gain setting with a range of 1V or 10V. The maximum sampling depth of each channel can achieve up to 4Msa. The specially designed ring buffer facilitates pre-trigger sampling function, which is suitable for signal recording of transience process of engineering. Delay of pre-trigger and post-trigger samples can cover the maximum period.
- 6/34 -
PRODUCT CATALOG
Triggering Sources
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
PEM2712 has wide range of triggering sources, including software (manual), internal and external triggering. Internal triggering level can be set up freely within current range with options of triggering conditions of rising edge, falling edge, internal dual-threshold, external dual-threshold; external signal complies with TTL electrical standard with options of effectiveness of rising edge and falling edge. Through setting multiple triggering modes, accurate capture of various characteristic signals can be guaranteed.
Specification Characteristics Sampling Rate (sps): 1k20M/10M/5M A/D resolution: 12 bits DC accuracy: 0.2%(FS) Input channel: Parallel synchronous 2 channel Input impedance: 1M//25pF Inter-channel <1(300kHz) Crosstalk: -85dB Voltage input: 1V10V Bandwidth of input signal: DC: 06MHz/3MHz/1.5MHz Memory depth of each channel (samples): 4M/CH(extended to 8M/CH 16M/CH) Triggering mode: manual, external and internal triggering. Internal triggering conditions includes rising edge and falling edge. The triggering level is adjustable. Interface: PC104 8bits bus phase difference: Operating System Windows 95/98/ME Windows 2000/XP Software DasView2.0 Toolkit Provide DEMO source code under common development platforms and technical support for development. Requirement on Environment Operating Temperature: 0 to 40 Storage Temperature: -40 to 60 Relative Humidity: 40 20 to 90% (no condensation)
- 7/34 -
PRODUCT CATALOG
Functional Block Diagram
PGA
Anti-alias filter
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
CH0
ADC
SDRAM
CH1
PGA
Anti-alias filter
ADC
SDRAM
External trigger
External trigger modulation
DAQ controller
SDRAM controller
SE2PROM
PC104 Bus
Accessory Model PEM-RELAY16 Description PC104 optical isolation relay control panel PC104 Pre-amplifying controller
Max. Rate(sps)
20M 10M 5M
Memory Depth(sa)
4M/CH 4M/CH 4M/CH
PEM-AMP206
- 8/34 -
PRODUCT CATALOG
PEM4311
Arbitrary Waveform Generator Module
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
Overview PEM4311 is an embedded arbitrary waveform generator module based on PC104 bus. It is especially applicable for the user to develop measurement & control instrument product with special application. It may generate routine waveforms such as sine wave, square wave, saw-toothed wave, pulse wave and noise to realize frequency modulation and amplitude modulation. In addition, PEM4311 can output appointed waveform document by user or generate waveform with mathematical expression. PEM4311 adopts DDS, FPGA and SRAM. The DDS CORE controller drives to generate arbitrary waveforms with output repeat frequency range from 0.02Hz to 5MHz with 0.02Hz adjusting step. High-speed swept output driven by software may generate the output effect of FM/AM. The users can embed PEM4311 to target system to carry on development. PEM4311 can be widely used at various situations that need all kinds of complex signal sources or excitation sources. It can be used in these field such as automatic measurement & control system, communication system test, product test in product line, frequency feature test and laboratory simulation. Therefore, it has excellent integration, frequency resolution, reliability, stability and performance-price ratio. Specification Characteristics Waveform frequency (Hz): 0.1 (DC)~5M A/D resolution: 12 bits DAC Rate: 20MHz Input channel: Single channel Output impedance: 50 Mode of input signal: Q9 solitary port Output range: 0~10Vpp Frequency resolution: 0.02Hz Frequency stability: <50ppm Waveform memory depth: 64ksa/CH Waveform reappear: 1~4G or series Sweep mode: linear up, down DC accuracy: setting value0.2% AC accuracy: 1% Harmonic distortion (sine wave non-linear distortion): (10Hz~500kHz) -56dBc (500kHz~5MHz) 56dBc+20log(f/500k) External reference clock input: 1MHz~60MHz TTL signal External triggering: TTL Triggering: external triggering or soft triggering Sized: 96mm90mm Operating System DOS Windows 95/98/ME NetVI former Toolkit Provide DEMO source code under common development platforms and technical support for development. Requirement on Environment Operating Temperature: 0 to 40 Storage Temperature: -40 to 60 Relative Humidity: 40 20 to 90% (no condensation)
- 9/34 -
PRODUCT CATALOG
PEM-RELAY16
Optical Isolation Relay Control Panel
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
Application
PEM-RELAY16 is a standard PC104 board card, applicable for any PC104 embedded system. The design of isolating voltage can be directly applied to the system without grounded.
Overview
PEM-RELAY16 optical isolation relay control panel can drive 12V or 24V optical isolation relay. A special isolating design can offer input of digital acquisition data a 1500 VDC isolation protection under noise environment. More than 16 channels independently control the Relay. A red LED displays the working status of the control panel.
5V
DC-DC
PC104 BUS
C0IL0
DCLK
DCLK
16
COIL15
Specification Characteristics Isolating voltage:1500VDC Max driven current: 30mA The number of max supporting cards in single system: 16 Standard design of PC104 board card Other parameter power waste: +5VDC@30mA (max) Operating Temperature: 0 to 40 Storage Temperature: -40 to 60 Relative Humidity: 40 20 to 90% (no condensation)
- 10/34 -
PRODUCT CATALOG
NetVI Toolkit for Virtual Instrument
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
Support rapid application development and special design for professional application Distributed network virtual instrument solutions Embedded data acquisition instrument Solutions
The modules such as PC104 serial acquisition cards and amplifier cards, signal generator, isolating DIO produced by Chengdu VIDTS Dynamic Instrument Co., Ltd. adopt advanced large-scale integrated circuit. They are especially applicable for taking as core components for professional embedded instrument development. The Company develops Ethernet virtual instrument toolkit-NetVI for rapid development based on PC104 platform. Through offering full-scale function DLL, it can achieve remote instrument module control through by simply calling library function. When the users customize their own professional application, the development will become easier. Therefore, they can pay more attention to application solution.
PC104 bus interface Module in PBX box PBX Integrated portable box Laptop Ethernet NetVI
PCI/ISA
stand cabinet
Sensor
Compatible pc
Cable
0 0
Preamplifer
0 0
Acquisition signal
PEM-AMP206
PEM-RELAY16
PEM-2712A
PEM-2712C
CPU
socket socket
PEM-4712
Upper diagram is NetVI systematic connection. Combining PC104 CPU board with Ethernet network interface with PEM acquisition module can consist of a NetVI system. PEM-AMP206 and PEM-RELAY16 can separately extend the range and isolation DIO. PEM4311 can offer a function as an embedded arbitrary waveform generator. All the PEM acquisition modules can be freely matched and used. PC104 CPU board OS and service port software operate the NETVI protocol and accept the order request and data transfer of remote PC. Network connection can be realized by twisted pair wire or coaxial cable with distance range of 100m to 300m. The repeaters can extend service effective range. If adopting optical fiber network connection, the transfer distance can reach from several kilometers to thousands of kilometers, while the sampling rate and data integrity will not be affected by distance.
- 11/13 -
PRODUCT CATALOG
Application
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
Digital instrument applied in industry, parallel acquisition product module with wide range of temperature, high shock resistance, and low consumption, miniaturized, easy to develop and install. Design and develop large scale measurement and testing system, complicate distant analog signal transfer and anti-interference Recommend virtual instrument products with own brand to realize miniaturization and micromation with portable mobile and battery power supply under matching pre-amplifier and sensor, and post measuring analyses software. NetVI Hardware 1. Acquisition device Features
Parallel design, 2 high-speed ADCs, 2 independent programmable gain channel Achieves 40mV~40V voltage signal acquisition with toolkit High accuracy of measurement with phase consistency Triggering sources: software (manual), internal, external triggering Standard PC104 board card designed Small-sized structure, stacked connection and easy bus drive
Max. Rate(sps)
40M 20M 10M 5M
Memory Depth(sa)
4M/CH 4M/CH 4M/CH 4M/CH
Note: Memory depth can be extended to 8M/CH or 16M/CH Accessory Pre-amplifying controller of PEM-AMP206 can realize a range control with input signal from 4mV to 400V in order to satisfy requirements of different clients. Using PEM2712 produced by our company can acquire great dynamic signal easily and it is applicable for all kinds of embedded systems. PEM-RELAY16 optical isolation relay control panel can drive 12V or 24V optical isolation relay. A special isolating design can offer input of digital acquisition data a 1500 VDC isolation protection under noise environment. More than 16 channels independently control the Relay. A red LED displays the working status of the control panel. PEM4311 may generate routine waveforms such as sine wave, square wave, saw-toothed wave, pulse wave and noise to realize frequency modulation and amplitude modulation. In addition, PEM4311 can output appointed waveform document by user or generate waveform with mathematical expression. - 12/13 -
PRODUCT CATALOG
2. Embedded main board
http://www.vidts.com
Chengdu VIDTS Dynamic Instrument Co., Ltd
CPU board module taking Intel high performance 32-bit embedded microprocessor 386EX as core has been equipped with integrated network communication interface and LCD display interface. It has low power consumption, high reliability, powerful function and high performance price ratio. The host computer operates DOS system, and has such characteristics as low price, delicate, stable and powerful hardware supporting, so it is a popular operating system in embedded application field. NetVI Software
*.DLL
Network service program of virtual instruments (NetVI server) After embedded host computer start-up, it can operate network service program of virtual instruments automatically, accept and process all kinds of operating requests inputted through network (IP address is set up in factory). It has high stability to process all kinds of network abnormity. Drive library of instrument (NetVI.DLL) Offer a series of functions in drive library of instrument for the users. The users can operate instrument only by calling library functions, so network communication is transparent for users just as instrument is working in native machine.
Chengdu VIDTS Dynamic Instrument Co., Ltd. established development support strategy that is long-term stability and facing whole period for the users who have special requirement of research and development. Therefore, it can well protect investment in custom-built special application.
- 13/13 -