Académique Documents
Professionnel Documents
Culture Documents
Converser of temperature tension. To be used with a digital multimeter with reach from -40C to 110C. With checker of the state of it laughed and a without any adjustment, thanks to LM35!
should use I find connected in the box for connect with the multimeter.
Operation mode for the circuit: Before doing a temperature measure it tests the pile pressing S1, everything ok is enough to connect the unit to the multimeter to accomplish the measures. In agreement with the temperature the multimeter in the scale of Volt DC 10V will indicate a tension from -4 to 1,1V or in the scale from 2000mV -400 to 1100mV, that depends on the multimeter, that tension corresponds the temperature from -40 to 110C. In the first case the decimal point will be despised and in the another it increases a decimal point after the third digit. With time it becomes used to. Example 0,256V (256mV) = 25,6C -0,158V (-158mV) = -15,8C. LM35 provides a lineal exit of +10mV/C. Suggestion of printed circuit board for the assembly
Components for the assembly the circuit Resistors R1 = 330 R2,R3 = 100k R4= 1k R5= 18k Capacitor electrolytic C1= 10F/12V Semiconductors: D1,D2= 1n4148 L1= Led Red Dz1= 4v7/400mW T1= bc547 IC1= lm35 Several: S1 = Switch, Jacques banana male or similar, clip for battery, etc.
Read more: Module thermometer, temperature meter for digital multimeter using the ic lm35 | Xtronic Free Electronic Circuits and Informations http://xtronic.org/circuit/module-thermometer-multimeterlm35/#ixzz2MyZJSywb