Académique Documents
Professionnel Documents
Culture Documents
Qualit y features
The solar cells are embedded in UV-resistant EVA plastic. The entire module is protected against dust and splash water (IP65). This ensures the long-term outdoor use. Each module is optically, mechanically, and electrically tested. Through regular monitoring and measurements, we ensure that all the electrical, mechanical, and optical requirements comply with the highest quality standards. The 50mm thick frame of anodized aluminium ensures excellent stability even in storm and snow load zone 3.
AE Solar GmbH Messerschmittring 54 86343 Knigsbrunn Tel.: +49 8231 / 97 82 66 0 Fax: +49 8231 / 97 82 66 9 E-Mail: info@ae-solar.com Web: www.ae-solar.com
Technical Data
Electrical Data
Nominal power/Wattage Open circuit voltage Short-circuit current Voltage at max power Current at max power Module efficiency Cell efficiency Pm (Wp) Voc (V) Isc (A) Vmp (V) Imp (A) (%) (%)
AE CQ 215P
215 38,00 7,40 30,81 6,98 13,22 14,71
AE CQ 220P
220 38,40 7,50 31,20 7,05 13,52 15,08
AE CQ 225P
225 37,39 8,13 29,53 7,62 13,83 15,41
AE CQ 230P
230 37,59 8,19 29,99 7,67 14,14 15,75
AE CQ 235P
235 38,53 8,24 30,37 7,74 14,44 16,10
The electrical data apply to Standard Test Conditions (STC): Irradiance of 1000 W/m with spectrum AM 1.5 and a cell temperature of 25C.
System voltage Temp. coefficient Voc Temp. coefficient Isc Temp. coefficient Pm Operating temperature NOCT
Technical Data
Dimensions (L x W x H, mm) Weight (kg ) Cell dimensions (mm) No of cells / Assembly Type of cells Hail resistance Wind load Mechanical load 1640 x 992 x 50 18 156 x 156 60 / 6 x 10 Poly-crystalline Max. 28 mm at 23 m/s 2400 Pa / 244 kg/m 6000 Pa / 612 kg/m
Connexion
Connection box Wire cross section ( ,mm) Cable length (mm) Connector type 3 bypass diodes, IP65 4,0 900 MC4 / MC4 compatible
Trade/Distributor
www.ae-solar.com