Académique Documents
Professionnel Documents
Culture Documents
20111110 Updated
Basical Description :
USB Desktop Reader BlackBox Series D10 is a small, handy and simple RFID Reader for your USB equipped terminal and laptop.This desktop reader is using USB interface for data transfer.It is useable for many different applications.
BlackBox Series D10
The USB Desktop Reader BlackBox Series D10 supports - EM4100 Unique RO - iProx card - eProx card option Applications: - Desktop reader / Encoders - Network Access Control, - Access Control - Card Authorization Functions:
- Read UID of EM4100 Unique RO chip - Read iProx card - Program CET5577 / CET5200 as EM Unique RO Tag - Program CET5500 as iProx card - Program eProx card option
Product Specification: Interface: Integrated Antenna: Operating System: Reading distance: Operating Temperature: Dimensions: Material: Colour: USB Yes MS Windows XP and Win 7 Up to 10cm (depending on the version and type of tag ) 0 -- +50 9.5 x 6.0 x 1.0 cm ABS Black
1 -2 : Just connect the D10 reader to the computer via USB cable,the message at the right-bottom of the PC window will automatically show as following :
Here,we can see that the USB driver has been successfully installed,and we can start to run the application software.
The CH341SER USB driver supports WINDOWS98/ME/2000/XP/VISTArver2008/WIN7/64/32-bit For WIN 7 32-bit,we can directly install CH342SER.exe For WIN 7 64-bit,we need to click F8 during WINDOWS system starting,and select Disable Digital Signature Mode to start the WINDOWS system.Then,once we find the relevant hardware in device manager,we need to click update driver ,and manually install this driver.
2 -1 : Extract
2 -2 : Double click
from slide 5
Step 1
Step 2
Step 4
Step 5
Step 6
Step 7
Step 8
Now,in the directory of D:program Files\iProxCard ,you will see following files created:
Double click
2.Click Link
3.Slect EM4100
Input into Facility Code with data 2,input into Card Number with data 2012345678,and click Write Card,the message window shows 2,2012345678 Write AND Read Block Success ,means the EM ID number has been already successfully programmed into the card.
Click Read Card, the message window shows 2,2012345678 ,means the EM ID card number just programmed in Denary format is 2012345678,and the customer code in denary format is 2.
1.Select iProx WG length ( here we take iProx WG26 as example ) 2.Select Parity ( here we take parity 2 as defaulted ) Input into Facility Code with data 120,input into Card Number with data 12345,and click Write Card,the message window shows 120,12345 Write AND Read Block Success ,means the iProx WG26 card number has been already successfully programmed into the card.
Click Read Card, the message window shows 120,12345 ,means the iProx WG26 card number just programmed is12345,and the facility code is 120 .