Vous êtes sur la page 1sur 45

DELHI JAL BOARD (GOVT. OF NCT OF DELHI) OFFICE OF THE EXECUTIVE ENGINEER (NW) II H- BLOCK, SECTOR-15 ROHINI, DELHI-110085.

No.DJB/EE (NW) II/2011/ CORRIGENDUM

Dated: _______2011.

It is circulated for information to all concerned that in this office Press NIT No.16 (2011-12) due to clerical mistake the excel version BQQ of item No.1 to 5 uploaded on website but could not be inserted in common tender documents. Accordingly the BQQ of item No.1 to 5 in both options i.e. CI & DI is now inserted in tender documents and is being uploaded on website. Sd/EXECUTIVE ENGINEER (NORTH WEST) II NOTICE BOARD Copy to: 1. PA TO MEMBER (ADMN). 2. MEMBER (W)/DR 3. CE (WEST).4. DIRECTOR (F&A) 5. DDV (W) 6. SE (N/West) 7. AO (NW) 9. ALL ZEs UNDER EE (NW)-II .10. JR. ACCTT. 11. DM-I 12. CASHIER 13. SYNDICATE BANK, 43, RANI JHANSI ROAD, NEW DELHI-110055. PH-23528976. 14. Case files.

EXECUTIVE ENGINEER (NORTH WEST) II 27851040

S. No 1

5.1 6

SCHEDULE OF WORK Description of Items P/F 1.6 mtr. High corrugated GI sheet barricading supported on sal/safeda ballies 100 mm dia,Two meter high placed at 2.5m centre to centre corrugated GI sheet fixed with nails of required length and dia to sal/safeda ballies including excavating holes of size 30 x30x 40 cm getting out the excavated soil and then returning the soilincluding consolidation by ramming and watering etc. all complete including disposal of surplus excavated earth within a lead of 50 mtr. Lift uupto 1.5 mtr. And painting on full surface of C.G.I. sheet (on one side with bright colour paint on Red and white in vertical) strips 0.3 ntr. Wide alternatively as directed by Engineer -in-Charge Cutting of bituminous road and taking out soiling metalling\ including sorting screening & stacking with in 50mtr lead including the cost of barricading & chowkidar Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-incharge.1:3:6 or richer mix Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unserviceable material within 50 metres lead : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Providing and laying S&S

Qty

Unit

Rate

Amount

9600

sqm

18.35

176160

1035

cum

214.75

222266.2 5

13.5

cum

368.45

4974.08

495

cum

199.55

98777.25

6000

metre 115.05

690300

BQQ NIT-16/1- CI OPTION

S. No 1

SCHEDULE OF WORK Description of Items P/F 1.6 mtr. High corrugated GI sheet barricading supported on sal/safeda ballies 100 mm dia,Two meter high placed at 2.5m centre to centre corrugated GI sheet fixed with nails of required length and dia to sal/safeda ballies including excavating holes of size 30 x30x 40 cm getting out the excavated soil and then returning the soilincluding consolidation by ramming and watering etc. all complete including disposal of surplus excavated earth within a lead of 50 mtr. Lift uupto 1.5 mtr. And painting on full surface of C.G.I. sheet (on one side with bright colour paint on Red and white in vertical) strips 0.3 ntr. Wide alternatively as directed by Engineer -in-Charge Cutting of bituminous road and taking out soiling metalling\ including sorting screening & stacking with in 50mtr lead including the cost of barricading & chowkidar Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-incharge.1:3:6 or richer mix Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unserviceable material within 50 metres lead :

Qty 9600

Unit sqm

Rate 18.35

Amount 176160

1035

cum

214.75 222266.2 5

13.5

cum

368.45 4974.08

495

cum

199.55 98777.25

5.1 6 6.1 6.2 6.3

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 6000 metre 115.05 690300 mm dia. but not exceeding 300 mm dia. Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 300 mm dia Ductile Iron Class K-7 pipes 400 mm dia Ductile Iron Class K-7 pipe 450 mm dia Ductile Iron Class K-7 3200 1200 1600 metre metre metre 2226.2 7124000 5 3837.6 4605120 4550.3 7280560

BQQ NIT 16/1 (DI OPTION)

S. No 1

6 6.1 6.2 6.3 6.4 6.5

SCHEDULE OF WORK Description of Items Qty Unit Rate Amount P/F 1.6 mtr. High corrugated GI sheet 6828.4 sqm 18.35 125301. barricading supported on sal/safeda 14 ballies 100 mm dia,Two meter high placed at 2.5m centre to centre corrugated GI sheet fixed with nails of required length and dia to sal/safeda ballies including excavating holes of size 30 x30x 40 cm getting out the excavated soil and then returning the soilincluding consolidation by ramming and watering etc. all complete including disposal of surplus excavated earth within a lead of 50 mtr. Lift uupto 1.5 mtr. And painting on full surface of C.G.I. sheet (on one side with bright colour paint on Red and white in vertical) strips 0.3 ntr. Wide alternatively as directed by Engineer -in-Charge Cutting of bituminous road and taking 2.3 cum 214.75 493.92 out soiling metalling\ including sorting screening & stacking with in 50mtr lead including the cost of barricading & chowkidar Demolishing cement concrete manually/ 2138.4 cum 368.45 787908. by mechanical means including disposal 4 22 of material within 50 metres lead as per direction of Engineer-in-charge.1:3:6 or richer mix Demolishing dry brick pitching in floors, 1022.7 cum 199.55 204085. drains etc. including stacking serviceable 3 77 material and disposal of unserviceable material within 50 metres lead : Excavating trenches of required width 15046 metre 115.05 1731042 for pipes, cables, etc including .3 excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 100 mm dia. Pipe 13629 metre 737.15 1004661 7.4 150 mm dia. pipe 742 metre 1066.6 791454. 5 3 200 mm dia. pipe 236 metre 1484 350224 250 mm dia. pipe 300 mm dia. pipe 198 241 metre metre 2106.8 417146. 4 2800 674800

NIT-16 (2) CI

S. No 1

NIT-16 (2) DI SCHEDULE OF WORK Description of Items Qty Unit P/F 1.6 mtr. High corrugated GI sheet 6828.4 sqm barricading supported on sal/safeda ballies 100 mm dia,Two meter high placed at 2.5m centre to centre corrugated GI sheet fixed with nails of required length and dia to sal/safeda ballies including excavating holes of size 30 x30x 40 cm getting out the excavated soil and then returning the soilincluding consolidation by ramming and watering etc. all complete including disposal of surplus excavated earth within a lead of 50 mtr. Lift uupto 1.5 mtr. And painting on full surface of C.G.I. sheet (on one side with bright colour paint on Red and white in vertical) strips 0.3 ntr. Wide alternatively as directed by Engineer -in-Charge Cutting of bituminous road and taking out soiling metalling\ including sorting screening & stacking with in 50mtr lead including the cost of barricading & chowkidar 2.3 cum

Rate 18.35

Amount 125301. 14

214.75 493.92

Demolishing cement concrete manually/ 2138.4 cum by mechanical means including disposal 4 of material within 50 metres lead as per direction of Engineer-in-charge.1:3:6 or richer mix Demolishing dry brick pitching in floors, 1022.7 cum drains etc. including stacking serviceable 3 material and disposal of unserviceable material within 50 metres lead : Excavating trenches of required width 15046 metre for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.

368.45 787908. 22

199.55 204085. 77

115.05 1731042 .3

6 6.1 6.2 6.3 6.4 6.5 6.6 7

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 100 mm dia Ductile Iron Class K-7 pipes 13629 metre 703.3 9585275 .7 150 mm dia Ductile Iron Class K-7 pipes 742 200 mm dia Ductile Iron Class K-7 pipes 236 250 mm dia Ductile Iron Class K-7 pipes 198 300 mm dia Ductile Iron Class K-7 pipes 241 350 mm dia Ductile Iron Class K-7 pipes 3 metre metre metre metre metre 1025.4 760846. 8 1457.1 343887. 5 4 1972.5 390564. 5 9 2784.9 671160. 9 3214.2 9642.75 5

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber

gasket : 7.1 7.2 7.3 7.4 7.5 8 8.1 9 9.1 10 10.1 11 12 12.1 12.2 12.3 12.4 100 mm dia pipes 150 mm dia pipes 200 mm dia pipes 250 mm dia. pipe 300 mm dia. pipe 2806 229 93 78 129 each each each each metre 39 60.3 98.2 111.7 153.1 109434 13808.7 9132.6 8712.6 19749.9

Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 Upto 600 mm dia 51.01 Quintal 10487. 534954. 25 62 Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 : Upto 600 mm dia 16.01 Quintal 11023. 176491. 85 84 Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead : 350 mm diameter pipe Supplying pig lead at site of work. 13 1.09 each 256 3328

Quintal 6742.2 7349

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Class I 100 mm dia Class I . 150 mm dia Class I . 200 mm dia Class I . 250 mm dia 18 4 1 1 each each each each 2468.0 44424.9 5 3689.1 14756.4 6731.8 6731.8 10013. 10013.8

8 12.5 12.6 13 13.1 14 Class I . 300 mm dia Class I . 350 mm dia Labour for cutting C.I. pipe with steel saw. 350 mm diametre C.I/DI pipe. Welding by gas or electric plant including transportation of plant at site etc. complete. 2 1 each each 12270. 24541 5 33007 33007

10 8798

each cm

129.1 1.45

1291 12757.1

15

Disinfecting C.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory : 100 mm diametre C.I./D.I. pipe. 150 mm diametre C.I./D.I. pipe. 200 mm diametre C.I./D.I. pipe. 250 mm diametre C.I./D.I. pipe. 13629 metre 742 236 198 metre metre metre 381.15 51946.9 3 580.8 4309.54

15.1 15.2 15.3 15.4 15.5 16

786.95 1857.2 1007.5 1994.95 5

300 mm diametre C.I./D.I. pipe. 241 metre 1150 2771.5 Providing cast iron detachable joints to AC pressure pipe and plain ended CI specials with collars, rubber rings, flanges, bolts and buts complete including testing of joints. 100 mm dia 150 mm dia 5 5 each each each 123.1 615.5

16.1 16.2 17

177.95 889.75 345 5175

Hire charges of pump set of capacity 15 4000 ltr./per hour for Pumping out water caused by tidal or river seepage broken water main or drain and like.

18 18.1

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 697.31 cum graded stone aggregate 20 mm nominal size) 1:4:8 (1 Cement : 4 coarse sand : 8 929.76 cum graded stone aggregate 40 mm nominal size). 3257.4 2271452 5 .46

18.2

2449

2276982 .24

19

Making interconnection with existing w/line cost of labour cutting pipe laying CI special providing lead caulked joints etc. excluding the cost of labour rubber ring pumping out water and filling etc. will be paid separately. 300 mm dia 3 Constructing masonry Chamber 18 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks each each 48.5 145.5 3595.3 64715.4

19.1 20

21

Constructing masonry Chamber 5 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks

each

6147.9 30739.7 5 5

22

23

Constructing masonry Chamber 4 each 8528.7 34115 120x120x100 cm, inside with 75 class 5 designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks Carriage of mulba by mechanical transport i/c loading/unloading & stacking within 50 m lead Upto 5.km Building rubbish Fixing in position C.I. Sluice valves and providing flanged joints (Two Now) including bolts, nuts, 3 mm thick two washers for each bolt rubber insertion 10 1 cum each 61.19 611.9

23.1 24

711.35 711.35

etc. all complete. 350 mm dia

Total

2038972 8/-

S. No 1

NIT-16/3 (CI) SCHEDULE OF WORK Description of Items Qty P/F 1.6 mtr. High corrugated GI sheet 4704 barricading supported on sal/safeda ballies 100 mm dia,Two meter high placed at 2.5m centre to centre corrugated GI sheet fixed with nails of required length and dia to sal/safeda ballies including excavating holes of size 30 x30x 40 cm getting out the excavated soil and then returning the soilincluding consolidation by ramming and watering etc. all complete including disposal of surplus excavated earth within a lead of 50 mtr. Lift uupto 1.5 mtr. And painting on full surface of C.G.I. sheet (on one side with bright colour paint on Red and white in vertical) strips 0.3 ntr. Wide alternatively as directed by Engineer -in-Charge Cutting of bituminous road and taking out soiling metalling\ including sorting screening & stacking with in 50mtr lead including the cost of barricading & chowkidar 577.8

Unit sqm

Rate 18.35

Amount 86318.4

cum

214.75 124082. 55

Demolishing cement concrete manually/ 288.9 by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1:3:6 or richer mix

cum

368.45 106445. 2

Demolishing dry brick pitching in floors, 211.86 cum drains etc. including stacking serviceable material and disposal of unserviceable material within 50 metres lead :

199.55 42276.6 6

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. 850 but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia 2070 but not exceeding 600 mm. metre 115.05 97792.5

5.1

5.2

metre

179.65 371875. 5

6 6.1 6.2 6.3 6.4 6.5 6.6 7 7.1 7.2

Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 300 mm dia. pipe 850 metre 2800 2380000 350 mm dia. pipe 400 mm dia. pipe 500 mm dia. pipe 450 mm dia. pipe 600 mm dia. pipe 100 280 350 410 930 metre metre metre metre metre 3455.5 345555 5 4233.2 1185296 6165.9 2158082 5 .5 5065.6 2076916 5 .5 8149.4 7578942

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket : 300 mm dia. pipe 154 metre 153.1 23577.4 350 mm dia pipes 18 each 182.15 3278.7

7.3 7.4 7.5 7.6 8 8.1 8.2 9 9.1 9.2 10 10.1 10.2 10.3 10.4 10.5

400 mm dia pipes 500 mm dia pipes 450 mm dia pipes 600 mm dia pipes

51 64 75 169

joint joint joint joint

340.4 393.2

17360.4 25164.8

378.35 28376.2 5 489.3 82691.7

Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) : Upto 300 mm dia. Over 300 mm dia. 4.12 45.18 Quintal 2893.3 11920.6 5 Quintal 3119.8 140954. 5 82

Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : Upto 300 mm dia. Over 300 mm dia. 1.47 14.57 Quintal 5123.4 7531.47 5 Quintel 5648.4 82297.9 5 2

Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead : 300 mm diameter pipe 350 mm diameter pipe 400 mm diameter pipe 500 mm diameter pipe 600 mm diameter pipe 10 4 5 12 10 each each each each each 246.35 2463.5 256 332.1 393.7 528.4 1024 1660.5 4724.4 5284

10.6 11 12 12.1 12.2 12.3 12.4 12.5 12.6 13 13.1 13.2 13.3 13.4 13.5 13.6 14

450 mm diameter pipe Supplying pig lead at site of work.

7 6.25

each

371.6

2601.2

Quintal 6742.2 42138.7 5

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Class I .300 mm dia Class I .350 mm dia Class I .400 mm dia Class I .450 mm dia Class I .500 mm dia Class I .600 mm dia Labour for cutting C.I. pipe with steel saw. 300 mm diametre C.I./D.I pipe. 350 mm diametre C.I/DI pipe. 400 mm diametre C.I. pipe. 500 mm diametre C.I./D.I pipe 450 mm diametre C.I. pipe. 600 mm diametre C.I. pipe. 1 1 1 1 1 1 each each each each each each 12270. 12270.5 5 38201. 35 52819. 65 65458 80138. 15 38201.3 5 52819.6 5 65458 80138.1 5

11262 112626. 6.9 9

5 4 4 4 4 4

each each each each each cut each cut

111.4 129.1 147.7 184.2 165.6

557 516.4 590.8 736.8 662.4

218.55 874.2

Disinfecting C.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory : 300 mm diametre C.I./D.I. pipe. 350 mm diametre C.I./D.I. pipe. 400 mm diametre C.I./D.I. pipe. 850 100 280 metre metre metre 1150 9775 1302.9 1302.95 5 1470.5 4117.4

14.1 14.2 14.3

14.4 14.5 14.6 15

450 mm diametre C.I./D.I. pipe. 500 mm diametre C.I./D.I. pipe. 600 mm diametre C.I./D.I. pipe.

410 350 930

metre metre metre each

1645.6 6747.16 5 1834.5 6420.92 5 2235.7 20792.0 1 345 10350

Hire charges of pump set of capacity 30 4000 ltr./per hour for Pumping out water caused by tidal or river seepage broken water main or drain and like.

16 16.1

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 10 graded stone aggregate 20 mm nominal size) 1:4:8 (1 Cement : 4 coarse sand : 8 10 graded stone aggregate 40 mm nominal size). Constructing masonry Chamber 6 120x120x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks cum 3257.4 32574.5 5

16.2

cum

2449

24490

17

each

8528.7 51172.5 5

18

Shifting of water connection from old CI 15 water line to new CI water line including boring in the new CI water main i/c providing fixing brass ferrule 6mm dia (weight not less than 150 gms) and i/c 1 meter long (one meter) G.I pipe (medium class) 15mm dia nominal bore i/c fittings, trenching, refilling, and disconnecting the existing connection from old water main i/c plugging the bore hole and depositing all serviceable as well as unsearviceable material obtained during disconnection in the store complete in all respect as directed by Engineer-in-charge Providing and fixing G.I. pipes complete 15 with G.I. fittings including trenching and refilling etc. External work : 15 mm dia. nominal bore

each

285.45 4281.75

19

metre

94.05

1410.75

20

Providing and fixing G.I. Union in G.I. 15 pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore. Earth work in excavation by mechanical 96 means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil Filling available excavated earth 96 (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

metre

75.9

1138.5

21

cum

101.85 9777.6

22

cum

45.7

4387.2

23

Carriage of mulba by mechanical transport i/c loading/unloading & stacking within 50 m lead Upto 5.km Building rubbish Earth 12 20 cum cum 61.19 76.48 734.28 1529.6

23.1 23.2 24 24.1

Extra for every additional lift of 1.5 m or part thereof in. All kinds of soil. 48 TOTAL

cum

18.9

907.2 1759399 5/-

S. No 1

NIT-16/3 (DI) SCHEDULE OF WORK Description of Items Qty P/F 1.6 mtr. High corrugated GI sheet 4704 barricading supported on sal/safeda ballies 100 mm dia,Two meter high placed at 2.5m centre to centre corrugated GI sheet fixed with nails of required length and dia to sal/safeda ballies including excavating holes of size 30 x30x 40 cm getting out the excavated soil and then returning the

Unit sqm

Rate 18.35

Amount 86318.4

soilincluding consolidation by ramming and watering etc. all complete including disposal of surplus excavated earth within a lead of 50 mtr. Lift uupto 1.5 mtr. And painting on full surface of C.G.I. sheet (on one side with bright colour paint on Red and white in vertical) strips 0.3 ntr. Wide alternatively as directed by Engineer -in-Charge Cutting of bituminous road and taking 577.8 out soiling metalling\ including sorting screening & stacking with in 50mtr lead including the cost of barricading & chowkidar Demolishing cement concrete manually/ 288.9 by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1:3:6 or richer mix

cum

214.75 124082. 55

cum

368.45 106445. 2

Demolishing dry brick pitching in floors, 211.86 cum drains etc. including stacking serviceable material and disposal of unserviceable material within 50 metres lead :

199.55 42276.6 6

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. 850 but not exceeding 300 mm dia. Pipes, cables etc. exceeding 300 mm dia 2070 but not exceeding 600 mm. metre 115.05 97792.5

5.1

5.2

metre

179.65 371875. 5

6 6.1 6.2

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 300 mm dia Ductile Iron Class K-7 pipes 850 metre 2784.9 2367165 350 mm dia Ductile Iron Class K-7 pipes 100 metre 3214.2 321425

5 6.3 6.4 6.5 6.6 7 7.1 7.2 7.3 7.4 7.5 7.6 8 8.1 9 9.1 10 10.1 400 mm dia Ductile Iron Class K-7 pipes 280 450 mm dia Ductile Iron Class K-7 pipes 410 500 mm dia Ductile Iron Class K-7 pipes 350 600 mm dia Ductile Iron Class K-7 pipes 930 metre metre metre metre 3837.6 1074528 4550.3 1865643 5 .5 5367.2 1878520 7081.3 6585609

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket : 300 mm dia. pipe 164 metre 153.1 25108.4 350 mm dia pipes 400 mm dia pipes 500 mm dia pipes 450 mm dia pipes 600 mm dia pipes 22 56 76 82 179 each joint joint joint joint 182.15 4007.3 340.4 393.2 19062.4 29883.2

378.35 31024.7 489.3 87584.7

Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 Upto 600 mm dia 22.405 Quintal 10487. 234966. 25 84 Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 : Upto 600 mm dia 10.075 Quintal 11023. 111065. 85 29 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Class I .300 mm dia 1 each 12270. 12270.5 5

10.2 10.3 10.4 10.5 10.6 11

Class I .350 mm dia Class I .400 mm dia Class I .450 mm dia Class I .500 mm dia Class I .600 mm dia Welding by gas or electric plant including transportation of plant at site etc. complete.

1 1 1 1 1 3360

each each each each each cm

38201. 35 52819. 65 65458 80138. 15

38201.3 5 52819.6 5 65458 80138.1 5

11262 112626. 6.9 9 1.45 4872

12

Disinfecting C.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory : 300 mm diametre C.I./D.I. pipe. 350 mm diametre C.I./D.I. pipe. 400 mm diametre C.I./D.I. pipe. 450 mm diametre C.I./D.I. pipe. 500 mm diametre C.I./D.I. pipe. 600 mm diametre C.I./D.I. pipe. 850 100 280 410 350 930 metre metre metre metre metre metre each 1150 9775 1302.9 1302.95 5 1470.5 4117.4 1645.6 6747.16 5 1834.5 6420.92 5 2235.7 20792.0 1 345 10350

12.1 12.2 12.3 12.4 12.5 12.6 13

Hire charges of pump set of capacity 30 4000 ltr./per hour for Pumping out water caused by tidal or river seepage broken water main or drain and like.

14

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :

14.1

1:2:4 (1 cement : 2 coarse sand : 4 10 graded stone aggregate 20 mm nominal size) 1:4:8 (1 Cement : 4 coarse sand : 8 10 graded stone aggregate 40 mm nominal size). Constructing masonry Chamber 6 120x120x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks Shifting of water connection from old CI 15 water line to new CI water line including boring in the new CI water main i/c providing fixing brass ferrule 6mm dia (weight not less than 150 gms) and i/c 1 meter long (one meter) G.I pipe (medium class) 15mm dia nominal bore i/c fittings, trenching, refilling, and disconnecting the existing connection from old water main i/c plugging the bore hole and depositing all serviceable as well as unsearviceable material obtained during disconnection in the store complete in all respect as directed by Engineer-in-charge

cum

3257.4 32574.5 5

14.2

cum

2449

24490

15

each

8528.7 51172.5 5

16

each

285.45 4281.75

17

Providing and fixing G.I. pipes complete 15 with G.I. fittings including trenching and refilling etc. External work : 15 mm dia. nominal bore

metre

94.05

1410.75

18

Providing and fixing G.I. Union in G.I. 15 pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore. Earth work in excavation by mechanical 96 means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil Filling available excavated earth 96 (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

metre

75.9

1138.5

19

cum

101.85 9777.6

20

cum

45.7

4387.2

21

Carriage of mulba by mechanical transport i/c loading/unloading & stacking within 50 m lead Upto 5.km Building rubbish Earth 12 20 cum cum 61.19 76.48 734.28 1529.6

21.1 21.2 22 22.1

Extra for every additional lift of 1.5 m or part thereof in. All kinds of soil. 48 TOTAL

cum

18.9

907.2 1602268

0/NIT-16/4 (CI) S. No 1 SCHEDULE OF WORK Description of Items Qty Unit P/F 1.6 mtr. High corrugated GI sheet 3628.8 sqm barricading supported on sal/safeda ballies 100 mm dia,Two meter high placed at 2.5m centre to centre corrugated GI sheet fixed with nails of required length and dia to sal/safeda ballies including excavating holes of size 30 x30x 40 cm getting out the excavated soil and then returning the soilincluding consolidation by ramming and watering etc. all complete including disposal of surplus excavated earth within a lead of 50 mtr. Lift uupto 1.5 mtr. And painting on full surface of C.G.I. sheet (on one side with bright colour paint on Red and white in vertical) strips 0.3 ntr. Wide alternatively as directed by Engineer -in-Charge Cutting of bituminous road and taking 2.3 cum out soiling metalling\ including sorting screening & stacking with in 50mtr lead including the cost of barricading & chowkidar Demolishing cement concrete manually/ 1203.6 cum by mechanical means including disposal 3 of material within 50 metres lead as per direction of Engineer-in-charge.1:3:6 or richer mix Demolishing dry brick pitching in floors, 559.15 cum drains etc. including stacking serviceable material and disposal of unserviceable material within 50 metres lead : Rate 18.35 Amount 66588.4 8

214.75 493.92

368.45 443477. 47

199.55 111578. 38

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. 8622 but not exceeding 300 mm dia. metre 115.05 991961. 1

5.1

6 6.1 6.2 6.3

Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 100 mm dia. pipe 7942 metre 737.15 5854445 .3 150 mm dia. pipe 200 mm dia. pipe 529 129 metre metre 1066.6 564257. 5 85 1484 191436

6.4 6.5 7 7.1 7.2 7.3 7.4 8

250 mm dia. pipe 300 mm dia. pipe

14 3

metre metre

2106.8 29495.2 2800 8400

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket : 100 mm dia pipes 1444 each 39 56316 150 mm dia pipes 200 mm dia pipes 250 mm dia. pipe 96 23 2 each each each 60.3 98.2 111.7 5788.8 2258.6 223.4

Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) :

8.1 9 9.1 10 10.1 10.2 10.3 10.4 10.5 11 12 12.1 12.2 12.3 12.4 13 13.1 13.2

Upto 300 mm dia.

57.14

Quintal 2893.3 165326. 5 02

Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : Upto 300 mm dia. 5.29 Quintal 5123.4 27103.0 5 5

Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead : 100 mm diameter pipe 150 mm diameter pipe 200 mm diameter pipe 250 mm diameter pipe 300 mm diameter pipe Supplying pig lead at site of work. 375 80 18 12 6 13.03 each each each each each 82.25 123.3 30843.7 5 9864

163.45 2942.1 204.2 2450.4

246.35 1478.1

Quintal 6742.2 87850.8 7

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Class I 100 mm dia Class I . 150 mm dia Class I . 200 mm dia Class I . 250 mm dia Labour for cutting C.I. pipe with steel saw. 100 mm diametre C.I./D.I pipe. 150 mm diametre C.I./D.I pipe. 8 2 1 1 each each each each 2468.0 19744.4 5 3689.1 7378.2 6731.8 6731.8 10013. 10013.8 8

50 20

each each

29.8 56.15

1490 1123

13.3

200 mm diametre C.I./D.I pipe.

10

each

74.9

749

13.4 13.5 14

250 mm diametre C.I/DI pipe.

each

92.65

463.25

300 mm diametre C.I./D.I pipe. 2 each 111.4 222.8 Disinfecting C.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory : 100 mm diametre C.I./D.I. pipe. 150 mm diametre C.I./D.I. pipe. 200 mm diametre C.I./D.I. pipe. 250 mm diametre C.I./D.I. pipe. 7942 529 129 14 metre metre metre metre 381.15 30270.9 3 580.8 3072.43

14.1 14.2 14.3 14.4 15

786.95 1015.17 1007.5 141.06 5

Providing cast iron detachable joints to AC pressure pipe and plain ended CI specials with collars, rubber rings, flanges, bolts and buts complete including testing of joints. 100 mm dia 150 mm dia 10 5 each each 123.1 1231

15.1 15.2 16 16.1

177.95 889.75

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 392.49 cum graded stone aggregate 20 mm nominal size) 1:5:10 (1 cement : 5 coarse sand : 10 523.32 cum graded stone aggregate 40 mm nominal size) 3257.4 1278516 5 .55

16.2

2237.7 1171059 5 .33

17

Constructing masonry Chamber 8 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks Constructing masonry Chamber 2 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks

each

3595.3 28762.4

18

each

6147.9 12295.9 5

19

Constructing masonry Chamber 2 120x120x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks

each

8528.7 17057.5 5

20

Carriage of mulba by mechanical transport i/c loading/unloading & stacking within 50 m lead Upto 5.km Building rubbish 5 cum each 61.19 305.95

20.1 21

Hire charges of pump set of capacity 5 4000 ltr./per hour for Pumping out water caused by tidal or river seepage broken water main or drain and like. TOTAL

348.45 1742.25

1124885 5/-

S. No 1

SCHEDULE OF WORK Description of Items Qty Unit P/F 1.6 mtr. High corrugated GI sheet 3628.8 sqm barricading supported on sal/safeda ballies 100 mm dia,Two meter high placed at 2.5m centre to centre corrugated GI sheet fixed with nails of required length and dia to sal/safeda ballies including excavating holes of size 30 x30x 40 cm getting out the excavated soil and then returning the soilincluding consolidation by ramming and watering etc. all complete including disposal of surplus excavated earth within a lead of 50 mtr. Lift uupto 1.5 mtr. And painting on full surface of C.G.I. sheet (on one side with bright colour paint on Red and white in vertical) strips 0.3 ntr. Wide alternatively as directed by Engineer -in-Charge Cutting of bituminous road and taking out soiling metalling\ including sorting screening & stacking with in 50mtr lead including the cost of barricading & chowkidar 2.3 cum

Rate 18.35

Amount 66588.4 8

214.75 493.92

Demolishing cement concrete manually/ 1203.6 cum by mechanical means including disposal 3 of material within 50 metres lead as per direction of Engineer-in-charge.1:3:6 or richer mix Demolishing dry brick pitching in floors, 559.15 cum drains etc. including stacking serviceable material and disposal of unserviceable material within 50 metres lead :

368.45 443477. 47

199.55 111578. 38

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. 8622 but not exceeding 300 mm dia. metre 115.05 991961. 1

5.1

6 6.1 6.2

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 100 mm dia Ductile Iron Class K-7 pipes 7942 metre 703.3 5585608 .6 150 mm dia Ductile Iron Class K-7 pipes 529 metre 1025.4 542436.

NIT-16/4 (DI)

S. No 1

NIT-16/5 (CI) SCHEDULE OF WORK Description of Items Qty P/F 1.6 mtr. High corrugated GI sheet 1148 barricading supported on sal/safeda ballies 100 mm dia,Two meter high placed at 2.5m centre to centre corrugated GI sheet fixed with nails of required length and dia to sal/safeda ballies including excavating holes of size 30 x30x 40 cm getting out the excavated soil and then returning the soilincluding consolidation by ramming and watering etc. all complete including disposal of surplus excavated earth within a lead of 50 mtr. Lift uupto 1.5 mtr. And painting on full surface of C.G.I. sheet (on one side with bright colour paint on Red and white in vertical) strips 0.3 ntr. Wide alternatively as directed by Engineer -in-Charge Cutting of bituminous road and taking out soiling metalling\ including sorting screening & stacking with in 50mtr lead including the cost of barricading & chowkidar 2.3

Unit sqm

Rate 18.35

Amount 21065.8

cum

214.75 493.92

Demolishing cement concrete manually/ 419.98 cum by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1:3:6 or richer mix Demolishing dry brick pitching in floors, 188.76 cum drains etc. including stacking serviceable material and disposal of unserviceable material within 50 metres lead : Excavating trenches of required width 2870 for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre

368.45 154741. 63

199.55 37667.0 6

115.05 330193. 5

6 6.1 6.2 6.3

Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 100 mm dia. pipe 2410 metre 737.15 1776531 .5 150 mm dia. pipe 200 mm dia. pipe 444 18 metre metre 1066.6 473592. 5 6 1484 26712

6.4 6.5 7

250 mm dia. pipe 300 mm dia. pipe

92 3

metre metre

2106.8 193825. 6 2800 8400

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber

gasket : 7.1 7.2 7.3 7.4 8 8.1 9 9.1 10 10.1 10.2 10.3 10.4 10.5 11 12 100 mm dia pipes 150 mm dia pipes 200 mm dia pipes 250 mm dia. pipe 438 80 3 16 each each each each 39 60.3 98.2 111.7 17082 4824 294.6 1787.2

Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) : Upto 300 mm dia. 23.54 Quintal 2893.3 68109.4 5 6

Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : Upto 300 mm dia. 4.39 Quintal 5123.4 22491.9 5 5

Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead : 100 mm diameter pipe 150 mm diameter pipe 200 mm diameter pipe 250 mm diameter pipe 300 mm diameter pipe Supplying pig lead at site of work. 135 32 10 5 4 5.15 each each each each each 82.25 123.3 11103.7 5 3945.6

163.45 1634.5 204.2 1021

246.35 985.4

Quintal 6742.2 34722.3 3

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :

12.1 12.2 12.3 12.4 13 13.1 13.2

Class I 100 mm dia Class I . 150 mm dia Class I . 200 mm dia Class I . 250 mm dia Labour for cutting C.I. pipe with steel saw. 100 mm diametre C.I./D.I pipe. 150 mm diametre C.I./D.I pipe.

5 2 1 1

each each each each

2468.0 12340.2 5 5 3689.1 7378.2 6731.8 6731.8 10013. 10013.8 8

10 10

each each

29.8 56.15

298 561.5

13.3

200 mm diametre C.I./D.I pipe.

each

74.9

149.8

13.4 13.5 14

250 mm diametre C.I/DI pipe.

each

92.65

185.3

300 mm diametre C.I./D.I pipe. 2 each 111.4 222.8 Disinfecting C.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory : 100 mm diametre C.I./D.I. pipe. 150 mm diametre C.I./D.I. pipe. 200 mm diametre C.I./D.I. pipe. 250 mm diametre C.I./D.I. pipe. 2410 444 18 92 metre metre metre metre 381.15 9185.72 580.8 2578.75

14.1 14.2 14.3 14.4 15

786.95 141.65 1007.5 926.95 5

Providing cast iron detachable joints to AC pressure pipe and plain ended CI specials with collars, rubber rings, flanges, bolts and buts complete including testing of joints.

15.1 15.2 16

100 mm dia 150 mm dia

10 5

each each each

123.1

1231

177.95 889.75 345 1725

Hire charges of pump set of capacity 5 4000 ltr./per hour for Pumping out water caused by tidal or river seepage broken water main or drain and like.

17 17.1

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 136.95 cum graded stone aggregate 20 mm nominal size) 1:4:8 (1 Cement : 4 coarse sand : 8 182.6 graded stone aggregate 40 mm nominal size). cum 3257.4 446107. 5 78

17.2

2449

447187. 4

18

Making interconnection with existing w/line cost of labour cutting pipe laying CI special providing lead caulked joints etc. excluding the cost of labour rubber ring pumping out water and filling etc. will be paid separately. 300 mm dia 1 Constructing masonry Chamber 5 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks each each 48.5 48.5 3595.3 17976.5

18.1 19

20

Constructing masonry Chamber 2 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks Constructing masonry Chamber 2 120x120x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat

each

6147.9 12295.9 5

21

each

8528.7 17057.5 5

cement complete as per standard design : With F.P.S. bricks 22 Carriage of mulba by mechanical transport i/c loading/unloading & stacking within 50 m lead Upto 5.km Building rubbish TOTAL NIT-16/5 (DI) S. No 1 SCHEDULE OF WORK Description of Items Qty P/F 1.6 mtr. High corrugated GI sheet 1148 barricading supported on sal/safeda ballies 100 mm dia,Two meter high placed at 2.5m centre to centre corrugated GI sheet fixed with nails of required length and dia to sal/safeda ballies including excavating holes of size 30 x30x 40 cm getting out the excavated soil and then returning the soilincluding consolidation by ramming and watering etc. all complete including disposal of surplus excavated earth within a lead of 50 mtr. Lift uupto 1.5 mtr. And painting on full surface of C.G.I. sheet (on one side with bright colour paint on Red and white in vertical) strips 0.3 ntr. Wide alternatively as directed by Engineer -in-Charge Cutting of bituminous road and taking out soiling metalling\ including sorting screening & stacking with in 50mtr lead including the cost of barricading & chowkidar 2.3 Unit sqm Rate 18.35 Amount 21065.8 5 cum 61.19 305.95 4186765 /-

22.1

cum

214.75 493.92

Demolishing cement concrete manually/ 419.98 cum by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1:3:6 or richer mix

368.45 154741. 63

Demolishing dry brick pitching in floors, 188.76 cum drains etc. including stacking serviceable material and disposal of unserviceable material within 50 metres lead : Excavating trenches of required width 2870 for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre

199.55 37667.0 6

115.05 330193. 5

6 6.1 6.2 6.3 6.4 6.5 7 7.1 7.2

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 100 mm dia Ductile Iron Class K-7 pipes 2410 metre 703.3 1694953 150 mm dia Ductile Iron Class K-7 pipes 444 200 mm dia Ductile Iron Class K-7 pipes 18 250 mm dia Ductile Iron Class K-7 pipes 92 metre metre metre 1025.4 455277. 6 1457.1 26228.7 5 1972.5 181474. 5 6

300 mm dia Ductile Iron Class K-7 pipes 3 metre 2784.9 8354.7 Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket : 100 mm dia pipes 573 each 39 22347 150 mm dia pipes 112 each 60.3 6753.6

7.3 7.4 8 8.1 9 9.1 10 10.1 11 12 12.1 12.2 12.3 12.4 13 13.1 14

200 mm dia pipes 250 mm dia. pipe

13 21

each each

98.2 111.7

1276.6 2345.7

Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 Upto 600 mm dia 10.74 Quintal 10487. 112633. 25 06 Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 : Upto 600 mm dia 3.47 Quintal 11023. 38252.7 85 6 Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead : 300 mm diameter pipe Supplying pig lead at site of work. 4 0.288 each 246.35 985.4

Quintal 6742.2 1941.75

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : Class I 100 mm dia Class I . 150 mm dia Class I . 200 mm dia Class I . 250 mm dia Labour for cutting C.I. pipe with steel saw. 300 mm diametre C.I./D.I pipe. Welding by gas or electric plant including transportation of plant at site etc. complete. 5 2 1 1 each each each each 2468.0 12340.2 5 5 3689.1 7378.2 6731.8 6731.8 10013. 10013.8 8

2 1158

each cm

111.4 1.45

222.8 1679.1

15

Disinfecting C.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main tested in the municipal laboratory : 100 mm diametre C.I./D.I. pipe. 150 mm diametre C.I./D.I. pipe. 200 mm diametre C.I./D.I. pipe. 250 mm diametre C.I./D.I. pipe. 2410 444 18 92 metre metre metre metre 381.15 9185.72 580.8 2578.75

15.1 15.2 15.3 15.4 16

786.95 141.65 1007.5 926.95 5

Providing cast iron detachable joints to AC pressure pipe and plain ended CI specials with collars, rubber rings, flanges, bolts and buts complete including testing of joints. 100 mm dia 150 mm dia 10 5 each each each 123.1 1231

16.1 16.2 17

177.95 889.75 345 1725

Hire charges of pump set of capacity 5 4000 ltr./per hour for Pumping out water caused by tidal or river seepage broken water main or drain and like.

18 18.1

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 136.95 cum graded stone aggregate 20 mm nominal size) 1:4:8 (1 Cement : 4 coarse sand : 8 182.6 graded stone aggregate 40 mm nominal size). cum 3257.4 446107. 5 78

18.2

2449

447187. 4

19

Making interconnection with existing w/line cost of labour cutting pipe laying CI special providing lead caulked joints etc. excluding the cost of labour rubber ring pumping out water and filling etc. will be paid separately. 300 mm dia 1 Constructing masonry Chamber 5 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks Constructing masonry Chamber 2 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks each each 48.5 48.5 3595.3 17976.5

19.1 20

21

each

6147.9 12295.9 5

22

Constructing masonry Chamber 2 120x120x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks

each

8528.7 17057.5 5

23

Carriage of mulba by mechanical transport i/c loading/unloading & stacking within 50 m lead Upto 5.km Building rubbish TOTAL 5 cum 61.19 305.95 4093011 /-

23.1

Vous aimerez peut-être aussi