Académique Documents
Professionnel Documents
Culture Documents
NICE PAC
Special as per your requirement : 1750mmx1350mmx2350mm (Inside Film Carrier) TECHINACAL SPECIFICTIONS MECHANICALLY OPERATED FROM FILL AND SEALING MACHINE 6000 P.P.H.
Model
1. 2. 3. Product Type of the Machine Speed of the Machine
: NICEPAC
: Milk or Any other free flowing material. : Fully automatic twin head mechanically operated with PLC for each head with independent Operations : 200ml--> 6000 Pouches per hour 500ml-->5000 pouches per Hour 1000ml--> 3000 pouches per hour 200ml, 500ml and 1000 ml. 2 ml 3 Phase ,440 Volts AC, with Neutral PLC Systems
Filling Range Accuracy Supply of Voltage Electronic Control Systems Type of seal Power consumption Pouch Length Systems Filling Systems Packing material
: : : : : : : : :
4 wire
Machine Speed Control With Frequency drive Over lap & Impulse heat seal , 3mm band 8 Kw Timing systems or photo mark Gravity filler (mechanical continues or impulse). Virgin film any impulse sealing material like co-ex LDPE film width :3242mm
13.
Cooling water
1.
Machine base plate is thick for heavy duty performance. This is treated With anti Corrosion epoxy paint. Main frame structure ms, head casting and all front assemblies are made of good Quality Aluminum. Machine cabinet is made of 304 grade 1.2mm thick Stainless sheet. All parts which are coming in contact with milk are of stainless steel 316 grade
2. 3.
4.
5. Balance tank mechanized float level control will be mounted on the top of the machine which will be connected to the injection system of the filling heads. 6. 7. The Ultra Violet tubes will be fitted on the machine and are located suitably to ensure proper sterilization of the polythene film. The machine will be provided with trapezoidal S.S. tray. This tray is fabricated out of 1.5 mm S.S. Sheet of 304 grade and adequate size to hold at least 3-5 minue
Mechanical / Motor driven. Less power consumption. Higher output / production rate. Least minimum film wastage. Minimum rejection rate ever seen. Higher filling accuracy. Uninterrupted / 24 hours operation. Simple design / operator friendly. Very little spares / maintenance. Very little electronic. PLC controlled. Suitable for plant automation too. Superior out look. All these at a very competitive price.