0 évaluation0% ont trouvé ce document utile (0 vote)
120 vues2 pages
GLENIUM ACE 6 SURETEC is the superplasticiser based on second generation polycarboxylic ether polymers, developed using nano-technology. Developed for applications in high performance pre-cast concrete to facilitate high early strength gains with super slump retention. Free of chloride and low alkali. It is compatible with all types of cements.
GLENIUM ACE 6 SURETEC is the superplasticiser based on second generation polycarboxylic ether polymers, developed using nano-technology. Developed for applications in high performance pre-cast concrete to facilitate high early strength gains with super slump retention. Free of chloride and low alkali. It is compatible with all types of cements.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
GLENIUM ACE 6 SURETEC is the superplasticiser based on second generation polycarboxylic ether polymers, developed using nano-technology. Developed for applications in high performance pre-cast concrete to facilitate high early strength gains with super slump retention. Free of chloride and low alkali. It is compatible with all types of cements.
Droits d'auteur :
Attribution Non-Commercial (BY-NC)
Formats disponibles
Téléchargez comme PDF, TXT ou lisez en ligne sur Scribd
Ultra-High early strength gaining superplasticising admixture with super slump retention for precast
Description workability at the time of placing. With application of
GLENIUM ACE 6 SURETEC is the superplasticiser sureTEC, concrete producers gain control over the based on second generation polycarboxylic ether workability of concrete at the time of placing – far polymers, developed using nano-technology. The beyond previously known levels. No matter if low product has been primarily developed for applications workability or high performance self compacting in high performance pre-cast concrete to facilitate high concrete, the placing workability remain unchanged early strength gains with super slump retention. from batch to batch. As a result concrete producers GLENIUM ACE 6 SURETEC is free of chloride & low are enabled to provide a specified workability of alkali. It is compatible with all types of cements. concrete consistently, even if hot weather or traffic conditions or other factors make it difficult to estimate Uses the time window between batching and placing. GLENIUM ACE 6 SURETEC is suitable for making precast concrete elements at all workability’s SURETEC also provides value to the end customers. including Rheoplastic or Super workable concrete The excellence in terms of quality control of concrete having fluid consistence, no segregation, a low at the same time assures consistency of workmanship, water binder ratio and, consequently high early a decisive prerequisite for a long life-cycle of a and long term strengths concrete structure. GLENIUM ACE 6 SURETEC may be used in combination with GLENIUM STREAM 2 for Typical Properties producing Rheodynamic concrete, capable of self- compaction, even in the presence of dense Aspect : Light brown liquid reinforcement with out the aid of vibration, for Relative Density : 1.08 ± 0.02 at 25°C making precast elements. pH : >6 As an component of Zero Energy System™ Chloride ion content : < 0.2% Advantages Standards Produces Rheoplastic and Rheodynamic ASTM C494 Types F concretes having a low water cement ratio EN 934-2 T3.1/3.2 Optimise curing cycles by reducing curing time or IS 9103 curing temperatures Eliminate heat curing Specification Clause Eliminate the energy required for placing, The slump-retaining hyperplasticiser shall be GLENIUM compacting & curing (Zero Energy System™) ACE 6 SURETEC, high range water reducing, high Increase productivity/ reduction in cycle time early strength gain type, Superplasticiser based on Improve surface appearance polycarboxylic ether formulation. The product shall Produce durable precast concrete elements have specific gravity of 1.08 & solid contents not less Improved engineering properties, compared to then 38% by weight. The product shall comply with traditional superplasticiser such as early and ASTM C494 Type F and shall be free of ultimate compressive and flexural strengths, lignosulphonates, naphthalene salts and melamine reduced shrinkage and low permeability. formaldehyde when subjected to IR Spectra.
ZERO ENERGY SYSTEM: Direction for use
Zero Energy System is based on a combination of the GLENIUM ACE 6 SURETEC is a ready-to-use liquid avant-garde admixture GLENIUM ACE 6 SURETEC which is dispensed into the concrete together with the and the innovative technology of Rheodynamic mixing water. The plasticising effect and water concrete. The Zero Energy System has been reduction are higher if the admixture is added to the developed to help the precast concrete producer to damp concrete after 50 to 70% of the mixing water rationalize his production process and save on energy has been added. The addition of GLENIUM ACE 6 costs combined with improved quality of the product SURETEC to dry aggregate or cement is not and the working conditions. recommended. Automatic dispensers are available. Thorough mixing is essential and a minimum mixing sureTEC – Super Retention Technology: cycle, after the addition of the GLENIUM ACE 6 sureTEC stands for Super Retention Technology. It is a SURETEC, of 60 seconds for forced action mixers is concrete admixture technology that brings benefits to recommended. all concrete producers in terms of slump retention and early strength development. It assures concrete Page 1 of 2 Dosage and on the type of cement, the nature of aggregates, Optimum dosage of GLENIUM ACE 6 SURETEC the method of transport and initial workability. should be determined in trial mixes. As a guide, a The use of MASTERKURE 111CF, evaporation dosage range of 300 ml to 1500ml per 100kg of reducer to prevent quick moisture loss from the cementitious material is normally recommended. surface of the flat works such as pavements in the dry, Because of variations in concrete materials, job site windy and hot climates is highly recommended. conditions, and/or applications, dosages outside of the Packaging recommended range may be required. In such cases, GLENIUM ACE 6 SURETEC is supplied in 225 kg contact your local BASF representative. drums or in bulk on request. Effects of over dosage Storage and Shelf life A severe over-dosage of GLENIUM ACE 6 SURETEC GLENIUM ACE 6 SURETEC must be stored where shall result in some of the followings: temperatures do not drop below +5°C. If product has Increase in air entrainment frozen, thaw at +5°C or above and completely Extension of initial and final set reconstitute using mild mechanical agitation. Do not Bleed/segregation of mix, quick loss of workability use pressurized air for agitation. Store under cover, Increased plastic shrinkage out of direct sunlight and protect from extremes of In the event of over-dosage, provided concrete is temperature. properly compacted & cured, the ultimate strength of the concrete may not be adversely affected and shall Shelf life is at least 12 months when stored as above. generally be higher than that for normal concrete. Due Failure to comply with the recommended storage allowance should be made for the effect of fluid conditions may result in premature deterioration of the concrete pressure on form work, and stripping times product or packaging. For specific storage advice should be monitored. consult your local BASF representative. In the event of over dosage, consult your local BASF representative immediately. Safety precautions As with all chemical products, care should be taken Compatibility during use and storage to avoid contact with eyes GLENIUM ACE 6 SURETEC is compatible with most of mouth, skin and foodstuffs (which can also be tainted the POZZOLITH series products including POZZOLITH with vapour until product fully cured or dried). Treat 55R. Use GLENIUM STREAM 2 as viscosity modifying splashes to eyes and skin immediately. If accidentally agent in self compacting concrete. It must not be used ingested, seek immediate medical attention. Keep in conjunction with any other admixture unless prior away from children and animals. Reseal containers approval is received from BASF Technical Services after use. Do not reuse containers for storage of Department. consumable item. For further information refer to the Corrosivity – Non Chloride, Non Corrosive material safety data sheet. MSDS available on demand GLENIUM ACE 6 SURETEC admixture will neither or on BASF construction chemicals web site. initiate nor promote corrosion of reinforcing steel Note embedded in concrete, prestressed concrete or All BASF Technical Data Sheets are updated on concrete placed on galvanized steel floor and roof regular basis; it is the user's responsibility, to obtain systems. Neither calcium chloride nor any calcium the most recent issue. chloride-based ingredients are used in the manufacture of GLENIUM ACE 6 SURETEC Field services where provided, does not constitute admixture. In all concrete application, GLENIUM ACE supervisory responsibility, for additional information 6 SURETEC admixture will conform to the most contact your local BASF representative. stringent or minimum chloride ion limits currently Disclaimer suggested by construction industry standards and Whilst any information contained herein is true, accurate and practices. represents our best knowledge and experience, no warranty Workability is given or implied with any recommendations made by us, GLENIUM ACE 6 SURETEC ensures that rheoplastic our representatives or distributors, as the conditions of use and the competence of any labour involved in the application concrete remains workable in excess of 45 minutes at are beyond our control. +25°C. Workability loss is dependent on temperature,